* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
@ 2018-05-05 0:17 George myglc2 Clemmer
2018-05-06 15:22 ` Ludovic Courtès
0 siblings, 1 reply; 9+ messages in thread
From: George myglc2 Clemmer @ 2018-05-05 0:17 UTC (permalink / raw)
To: 31367
This just appears in the last day or so. Running guix (GNU Guix)
0.14.0.4837-d6ed4 I see ...
cd guix && guix environment guix -- make
The following derivations will be built:
/gnu/store/mcfys0glgv1hnq5mrcs9xnmn4bpzr3ys-profile.drv
/gnu/store/qikmbskc6598vld2lhb2pn30h1rwxgc8-xdg-mime-database.drv
/gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv
/gnu/store/bdg4x3925r9l3458li48hp1i26shd7yw-manual-database.drv
Backtrace:
10 (primitive-load "/gnu/store/611mdvnasj59v5j46g8mhq7aw0g?")
In ice-9/eval.scm:
721:20 9 (primitive-eval (begin (use-modules (guix build #) ?) ?))
In ice-9/psyntax.scm:
1235:36 8 (expand-top-sequence ((begin (use-modules (# # ?) ?) ?)) ?)
1182:24 7 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
1182:24 6 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
285:10 5 (parse _ (("placeholder" placeholder)) (()) _ c&e (eval) ?)
In ice-9/boot-9.scm:
3365:20 4 (process-use-modules _)
222:17 3 (map1 (((guix build utils)) ((srfi srfi-1)) ((srfi ?)) ?))
3366:31 2 (_ ((guix build utils)))
2791:6 1 (resolve-interface _ #:select _ #:hide _ #:prefix _ # _ ?)
In unknown file:
0 (scm-error misc-error #f "~A ~S" ("no code for modu?" ?) ?)
ERROR: In procedure scm-error:
no code for module (guix build utils)
Creating manual page database...
builder for `/gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv' failed with exit code 1
cannot build derivation `/gnu/store/mcfys0glgv1hnq5mrcs9xnmn4bpzr3ys-profile.drv': 1 dependencies couldn't be built
guix environment: error: build failed: build of `/gnu/store/mcfys0glgv1hnq5mrcs9xnmn4bpzr3ys-profile.drv' failed
make: *** [Makefile:9: guix/] Error 1
FWIW, guix (GNU Guix) 0.14.0-11.ab85cf7 doesn't generate the error.
HTH - George
^ permalink raw reply [flat|nested] 9+ messages in thread* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
2018-05-05 0:17 bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils) George myglc2 Clemmer
@ 2018-05-06 15:22 ` Ludovic Courtès
2018-05-06 18:13 ` George Clemmer
2018-05-25 9:28 ` Roel Janssen
0 siblings, 2 replies; 9+ messages in thread
From: Ludovic Courtès @ 2018-05-06 15:22 UTC (permalink / raw)
To: George myglc2 Clemmer; +Cc: 31367
George myglc2 Clemmer <myglc2@gmail.com> skribis:
> cd guix && guix environment guix -- make
> The following derivations will be built:
> /gnu/store/mcfys0glgv1hnq5mrcs9xnmn4bpzr3ys-profile.drv
> /gnu/store/qikmbskc6598vld2lhb2pn30h1rwxgc8-xdg-mime-database.drv
> /gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv
> /gnu/store/bdg4x3925r9l3458li48hp1i26shd7yw-manual-database.drv
> Backtrace:
> 10 (primitive-load "/gnu/store/611mdvnasj59v5j46g8mhq7aw0g?")
> In ice-9/eval.scm:
> 721:20 9 (primitive-eval (begin (use-modules (guix build #) ?) ?))
> In ice-9/psyntax.scm:
> 1235:36 8 (expand-top-sequence ((begin (use-modules (# # ?) ?) ?)) ?)
> 1182:24 7 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
> 1182:24 6 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
> 285:10 5 (parse _ (("placeholder" placeholder)) (()) _ c&e (eval) ?)
> In ice-9/boot-9.scm:
> 3365:20 4 (process-use-modules _)
> 222:17 3 (map1 (((guix build utils)) ((srfi srfi-1)) ((srfi ?)) ?))
> 3366:31 2 (_ ((guix build utils)))
> 2791:6 1 (resolve-interface _ #:select _ #:hide _ #:prefix _ # _ ?)
> In unknown file:
> 0 (scm-error misc-error #f "~A ~S" ("no code for modu?" ?) ?)
>
> ERROR: In procedure scm-error:
> no code for module (guix build utils)
> Creating manual page database...
> builder for `/gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv' failed with exit code 1
I’m merging it with <https://bugs.gnu.org/28144>. No fix yet but we’re
working on it. In the meantime, ‘guix pull’ may allow you to work
around it.
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 9+ messages in thread* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
2018-05-06 15:22 ` Ludovic Courtès
@ 2018-05-06 18:13 ` George Clemmer
2018-05-25 9:28 ` Roel Janssen
1 sibling, 0 replies; 9+ messages in thread
From: George Clemmer @ 2018-05-06 18:13 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 31367
Hi Ludo’,
Ludovic Courtès writes:
> I’m merging it with <https://bugs.gnu.org/28144>. No fix yet but we’re
> working on it. In the meantime, ‘guix pull’ may allow you to work
> around it.
Thanks for the update. No rush, I have a workaround ;-)
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
2018-05-06 15:22 ` Ludovic Courtès
2018-05-06 18:13 ` George Clemmer
@ 2018-05-25 9:28 ` Roel Janssen
2018-05-25 9:56 ` Ricardo Wurmus
2018-05-25 10:03 ` Ludovic Courtès
1 sibling, 2 replies; 9+ messages in thread
From: Roel Janssen @ 2018-05-25 9:28 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: George myglc2 Clemmer, 31367
Ludovic Courtès <ludo@gnu.org> writes:
> George myglc2 Clemmer <myglc2@gmail.com> skribis:
>
>> cd guix && guix environment guix -- make
>> The following derivations will be built:
>> /gnu/store/mcfys0glgv1hnq5mrcs9xnmn4bpzr3ys-profile.drv
>> /gnu/store/qikmbskc6598vld2lhb2pn30h1rwxgc8-xdg-mime-database.drv
>> /gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv
>> /gnu/store/bdg4x3925r9l3458li48hp1i26shd7yw-manual-database.drv
>> Backtrace:
>> 10 (primitive-load "/gnu/store/611mdvnasj59v5j46g8mhq7aw0g?")
>> In ice-9/eval.scm:
>> 721:20 9 (primitive-eval (begin (use-modules (guix build #) ?) ?))
>> In ice-9/psyntax.scm:
>> 1235:36 8 (expand-top-sequence ((begin (use-modules (# # ?) ?) ?)) ?)
>> 1182:24 7 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
>> 1182:24 6 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
>> 285:10 5 (parse _ (("placeholder" placeholder)) (()) _ c&e (eval) ?)
>> In ice-9/boot-9.scm:
>> 3365:20 4 (process-use-modules _)
>> 222:17 3 (map1 (((guix build utils)) ((srfi srfi-1)) ((srfi ?)) ?))
>> 3366:31 2 (_ ((guix build utils)))
>> 2791:6 1 (resolve-interface _ #:select _ #:hide _ #:prefix _ # _ ?)
>> In unknown file:
>> 0 (scm-error misc-error #f "~A ~S" ("no code for modu?" ?) ?)
>>
>> ERROR: In procedure scm-error:
>> no code for module (guix build utils)
>> Creating manual page database...
>> builder for `/gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv' failed with exit code 1
>
> I’m merging it with <https://bugs.gnu.org/28144>. No fix yet but we’re
> working on it. In the meantime, ‘guix pull’ may allow you to work
> around it.
I'm using a git checkout of Guix, and I am encountering this bug with
version 217af8ae7. Is there a work-around?
Kind regards,
Roel Janssen
^ permalink raw reply [flat|nested] 9+ messages in thread* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
2018-05-25 9:28 ` Roel Janssen
@ 2018-05-25 9:56 ` Ricardo Wurmus
2018-05-25 10:01 ` Roel Janssen
2018-05-25 10:03 ` Ludovic Courtès
1 sibling, 1 reply; 9+ messages in thread
From: Ricardo Wurmus @ 2018-05-25 9:56 UTC (permalink / raw)
To: Roel Janssen; +Cc: George myglc2 Clemmer, 31367
Roel Janssen <roel@gnu.org> writes:
> I'm using a git checkout of Guix, and I am encountering this bug with
> version 217af8ae7. Is there a work-around?
Does it happen all the time?
A work-around, as I understood it, is to ensure that you ensure that the
compilation only uses a single core.
--
Ricardo
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
2018-05-25 9:56 ` Ricardo Wurmus
@ 2018-05-25 10:01 ` Roel Janssen
0 siblings, 0 replies; 9+ messages in thread
From: Roel Janssen @ 2018-05-25 10:01 UTC (permalink / raw)
To: Ricardo Wurmus; +Cc: George myglc2 Clemmer, 31367
Ricardo Wurmus <ricardo.wurmus@mdc-berlin.de> writes:
> Roel Janssen <roel@gnu.org> writes:
>
>> I'm using a git checkout of Guix, and I am encountering this bug with
>> version 217af8ae7. Is there a work-around?
>
> Does it happen all the time?
Yes. Consistently on multiple user profiles.
>
> A work-around, as I understood it, is to ensure that you ensure that the
> compilation only uses a single core.
Can I build a profile derivation using a single core from the
command-line?
Kind regards,
Roel Janssen
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
2018-05-25 9:28 ` Roel Janssen
2018-05-25 9:56 ` Ricardo Wurmus
@ 2018-05-25 10:03 ` Ludovic Courtès
2018-05-25 12:22 ` Roel Janssen
[not found] ` <cucpnu4gaxm.fsf@gmail.com>
1 sibling, 2 replies; 9+ messages in thread
From: Ludovic Courtès @ 2018-05-25 10:03 UTC (permalink / raw)
To: Roel Janssen; +Cc: George myglc2 Clemmer, 31367
Roel Janssen <roel@gnu.org> skribis:
> Ludovic Courtès <ludo@gnu.org> writes:
>
>> George myglc2 Clemmer <myglc2@gmail.com> skribis:
>>
>>> cd guix && guix environment guix -- make
>>> The following derivations will be built:
>>> /gnu/store/mcfys0glgv1hnq5mrcs9xnmn4bpzr3ys-profile.drv
>>> /gnu/store/qikmbskc6598vld2lhb2pn30h1rwxgc8-xdg-mime-database.drv
>>> /gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv
>>> /gnu/store/bdg4x3925r9l3458li48hp1i26shd7yw-manual-database.drv
>>> Backtrace:
>>> 10 (primitive-load "/gnu/store/611mdvnasj59v5j46g8mhq7aw0g?")
>>> In ice-9/eval.scm:
>>> 721:20 9 (primitive-eval (begin (use-modules (guix build #) ?) ?))
>>> In ice-9/psyntax.scm:
>>> 1235:36 8 (expand-top-sequence ((begin (use-modules (# # ?) ?) ?)) ?)
>>> 1182:24 7 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
>>> 1182:24 6 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
>>> 285:10 5 (parse _ (("placeholder" placeholder)) (()) _ c&e (eval) ?)
>>> In ice-9/boot-9.scm:
>>> 3365:20 4 (process-use-modules _)
>>> 222:17 3 (map1 (((guix build utils)) ((srfi srfi-1)) ((srfi ?)) ?))
>>> 3366:31 2 (_ ((guix build utils)))
>>> 2791:6 1 (resolve-interface _ #:select _ #:hide _ #:prefix _ # _ ?)
>>> In unknown file:
>>> 0 (scm-error misc-error #f "~A ~S" ("no code for modu?" ?) ?)
>>>
>>> ERROR: In procedure scm-error:
>>> no code for module (guix build utils)
>>> Creating manual page database...
>>> builder for `/gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv' failed with exit code 1
>>
>> I’m merging it with <https://bugs.gnu.org/28144>. No fix yet but we’re
>> working on it. In the meantime, ‘guix pull’ may allow you to work
>> around it.
>
> I'm using a git checkout of Guix, and I am encountering this bug with
> version 217af8ae7. Is there a work-around?
In essence you need to recompile guix/profiles.go.
If you’re in a checkout that’s easy, otherwise you may have to re-run
‘guix pull’, which isn’t great.
Ludo’.
^ permalink raw reply [flat|nested] 9+ messages in thread* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
2018-05-25 10:03 ` Ludovic Courtès
@ 2018-05-25 12:22 ` Roel Janssen
[not found] ` <cucpnu4gaxm.fsf@gmail.com>
1 sibling, 0 replies; 9+ messages in thread
From: Roel Janssen @ 2018-05-25 12:22 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: George myglc2 Clemmer, 31367
Ludovic Courtès <ludo@gnu.org> writes:
> Roel Janssen <roel@gnu.org> skribis:
>
>> Ludovic Courtès <ludo@gnu.org> writes:
>>
>>> George myglc2 Clemmer <myglc2@gmail.com> skribis:
>>>
>>>> cd guix && guix environment guix -- make
>>>> The following derivations will be built:
>>>> /gnu/store/mcfys0glgv1hnq5mrcs9xnmn4bpzr3ys-profile.drv
>>>> /gnu/store/qikmbskc6598vld2lhb2pn30h1rwxgc8-xdg-mime-database.drv
>>>> /gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv
>>>> /gnu/store/bdg4x3925r9l3458li48hp1i26shd7yw-manual-database.drv
>>>> Backtrace:
>>>> 10 (primitive-load "/gnu/store/611mdvnasj59v5j46g8mhq7aw0g?")
>>>> In ice-9/eval.scm:
>>>> 721:20 9 (primitive-eval (begin (use-modules (guix build #) ?) ?))
>>>> In ice-9/psyntax.scm:
>>>> 1235:36 8 (expand-top-sequence ((begin (use-modules (# # ?) ?) ?)) ?)
>>>> 1182:24 7 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
>>>> 1182:24 6 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
>>>> 285:10 5 (parse _ (("placeholder" placeholder)) (()) _ c&e (eval) ?)
>>>> In ice-9/boot-9.scm:
>>>> 3365:20 4 (process-use-modules _)
>>>> 222:17 3 (map1 (((guix build utils)) ((srfi srfi-1)) ((srfi ?)) ?))
>>>> 3366:31 2 (_ ((guix build utils)))
>>>> 2791:6 1 (resolve-interface _ #:select _ #:hide _ #:prefix _ # _ ?)
>>>> In unknown file:
>>>> 0 (scm-error misc-error #f "~A ~S" ("no code for modu?" ?) ?)
>>>>
>>>> ERROR: In procedure scm-error:
>>>> no code for module (guix build utils)
>>>> Creating manual page database...
>>>> builder for `/gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv' failed with exit code 1
>>>
>>> I’m merging it with <https://bugs.gnu.org/28144>. No fix yet but we’re
>>> working on it. In the meantime, ‘guix pull’ may allow you to work
>>> around it.
>>
>> I'm using a git checkout of Guix, and I am encountering this bug with
>> version 217af8ae7. Is there a work-around?
>
> In essence you need to recompile guix/profiles.go.
That solved it for me. Thanks!
Kind regards,
Roel Janssen
^ permalink raw reply [flat|nested] 9+ messages in thread[parent not found: <cucpnu4gaxm.fsf@gmail.com>]
* bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils)
[not found] ` <cucpnu4gaxm.fsf@gmail.com>
@ 2018-12-14 1:32 ` George Clemmer
0 siblings, 0 replies; 9+ messages in thread
From: George Clemmer @ 2018-12-14 1:32 UTC (permalink / raw)
Cc: 31367
ludo@gnu.org (Ludovic Courtès) writes:
> Roel Janssen <roel@gnu.org> skribis:
>
>> Ludovic Courtès <ludo@gnu.org> writes:
>>
>>> George myglc2 Clemmer <myglc2@gmail.com> skribis:
>>>
>>>> cd guix && guix environment guix -- make
>>>> The following derivations will be built:
>>>> /gnu/store/mcfys0glgv1hnq5mrcs9xnmn4bpzr3ys-profile.drv
>>>> /gnu/store/qikmbskc6598vld2lhb2pn30h1rwxgc8-xdg-mime-database.drv
>>>> /gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv
>>>> /gnu/store/bdg4x3925r9l3458li48hp1i26shd7yw-manual-database.drv
>>>> Backtrace:
>>>> 10 (primitive-load "/gnu/store/611mdvnasj59v5j46g8mhq7aw0g?")
>>>> In ice-9/eval.scm:
>>>> 721:20 9 (primitive-eval (begin (use-modules (guix build #) ?) ?))
>>>> In ice-9/psyntax.scm:
>>>> 1235:36 8 (expand-top-sequence ((begin (use-modules (# # ?) ?) ?)) ?)
>>>> 1182:24 7 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
>>>> 1182:24 6 (parse _ (("placeholder" placeholder)) ((top) #(# # ?)) ?)
>>>> 285:10 5 (parse _ (("placeholder" placeholder)) (()) _ c&e (eval) ?)
>>>> In ice-9/boot-9.scm:
>>>> 3365:20 4 (process-use-modules _)
>>>> 222:17 3 (map1 (((guix build utils)) ((srfi srfi-1)) ((srfi ?)) ?))
>>>> 3366:31 2 (_ ((guix build utils)))
>>>> 2791:6 1 (resolve-interface _ #:select _ #:hide _ #:prefix _ # _ ?)
>>>> In unknown file:
>>>> 0 (scm-error misc-error #f "~A ~S" ("no code for modu?" ?) ?)
>>>>
>>>> ERROR: In procedure scm-error:
>>>> no code for module (guix build utils)
>>>> Creating manual page database...
>>>> builder for `/gnu/store/izxixb30i4r79gahirb4nj5ay0z8nzv1-info-dir.drv' failed with exit code 1
>>>
>>> I’m merging it with <https://bugs.gnu.org/28144>. No fix yet but we’re
>>> working on it. In the meantime, ‘guix pull’ may allow you to work
>>> around it.
>>
>> I'm using a git checkout of Guix, and I am encountering this bug with
>> version 217af8ae7. Is there a work-around?
>
> In essence you need to recompile guix/profiles.go.
>
> If you’re in a checkout that’s easy, otherwise you may have to re-run
> ‘guix pull’, which isn’t great.
>
> Ludo’.
Hi Ludo’,
I continue to hit this error sporadically. Most recently today using
guix (GNU Guix) 0.16.0.131-ce3fe and guile (GNU Guile) 2.2.4. The above
mentioned workaround does seem to "work". At the moment, I have several
examples of the error in my store. Please advise if it would helpful to
provide these and, if so , what you want to see.
TIA, George
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-12-14 1:33 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-05 0:17 bug#31367: ERROR: In procedure scm-error: no code for module (guix build utils) George myglc2 Clemmer
2018-05-06 15:22 ` Ludovic Courtès
2018-05-06 18:13 ` George Clemmer
2018-05-25 9:28 ` Roel Janssen
2018-05-25 9:56 ` Ricardo Wurmus
2018-05-25 10:01 ` Roel Janssen
2018-05-25 10:03 ` Ludovic Courtès
2018-05-25 12:22 ` Roel Janssen
[not found] ` <cucpnu4gaxm.fsf@gmail.com>
2018-12-14 1:32 ` George Clemmer
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.