* Tor Service
@ 2019-04-24 16:34 Raghav Gururajan
0 siblings, 0 replies; 11+ messages in thread
From: Raghav Gururajan @ 2019-04-24 16:34 UTC (permalink / raw)
To: bug-guix; +Cc: guix-devel
[-- Attachment #1: Type: text/plain, Size: 277 bytes --]
Hello Guix!
Including "tor-service-type" does not invoke and add "tor" package into
the system. Without "tor" package, tor commands cannot be used.
Therefore, "tor-service-type" is of little or no use, if it does not
invoke and add "tor" package into the system.
Regards,
RG.
[-- Attachment #2: Type: text/html, Size: 449 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Tor Service
@ 2019-05-10 4:41 Raghav Gururajan
2019-05-15 21:13 ` Ludovic Courtès
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Raghav Gururajan @ 2019-05-10 4:41 UTC (permalink / raw)
To: help-guix; +Cc: dannym
[-- Attachment #1: Type: text/plain, Size: 575 bytes --]
Hello Guix!
I added Tor Service with Default Configuration to my system config. I also added the user to Tor group.
When I configured my browser to use localhost's tor port as proxy, I got error "proxy is refusing connection".
When I check tor service with "herd status" as root, tor wasn't running. When I did "herd start tor", I am getting error "service tor failed to start".
I have been asked to provide output of "dmesg", which I have attached with this email.
NOTE TO CHRIS: I have started this new thread for clarity. :)
Thank you!
Regards,
RG.
[-- Attachment #2: dmesg_log --]
[-- Type: application/octet-stream, Size: 63065 bytes --]
root@secondary ~# dmesg
[ 0.000000] Linux version 5.0.14-gnu (nixbld@) (gcc version 7.4.0 (GCC)) #1 SMP 1
[ 0.000000] Command line: BOOT_IMAGE=/gnu/store/v0ziysnm86c9bi8wh8pf6cckkdzqsyjf-linux-libre-5.0.14/bzImage --root=rg-root --system=/gnu/store/kvzm4plj05mn11jb453a3f6mlpbmh7zv-system --load=/gnu/store/kvzm4plj05mn11jb453a3f6mlpbmh7zv-system/boot quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000c0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfa9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfaa0000-0x00000000bfbfffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 744944U/744944U, BIOS CBET4000 3774c98 09/07/2016
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2133.262 MHz processor
[ 0.000587] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000590] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000597] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000605] MTRR default type: write-back
[ 0.000606] MTRR fixed ranges enabled:
[ 0.000609] 00000-9FFFF write-back
[ 0.000610] A0000-BFFFF uncachable
[ 0.000612] C0000-FFFFF write-back
[ 0.000613] MTRR variable ranges enabled:
[ 0.000616] 0 base 0BFC00000 mask FFFC00000 uncachable
[ 0.000618] 1 base 0C0000000 mask FF0000000 uncachable
[ 0.000620] 2 base 0D0000000 mask FF0000000 write-combining
[ 0.000622] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000623] 4 disabled
[ 0.000624] 5 disabled
[ 0.000626] 6 disabled
[ 0.000627] 7 disabled
[ 0.003315] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.003473] last_pfn = 0xbfaa0 max_arch_pfn = 0x400000000
[ 0.005361] found SMP MP-table at [mem 0x000f0cf0-0x000f0cff]
[ 0.005522] check: Scanning 1 areas for low memory corruption
[ 0.005531] BRK [0x19a801000, 0x19a801fff] PGTABLE
[ 0.005535] BRK [0x19a802000, 0x19a802fff] PGTABLE
[ 0.005537] BRK [0x19a803000, 0x19a803fff] PGTABLE
[ 0.005598] BRK [0x19a804000, 0x19a804fff] PGTABLE
[ 0.005602] BRK [0x19a805000, 0x19a805fff] PGTABLE
[ 0.005855] BRK [0x19a806000, 0x19a806fff] PGTABLE
[ 0.005892] BRK [0x19a807000, 0x19a807fff] PGTABLE
[ 0.005967] BRK [0x19a808000, 0x19a808fff] PGTABLE
[ 0.006229] RAMDISK: [mem 0x363df000-0x371e6fff]
[ 0.006236] ACPI: Early table checksum verification disabled
[ 0.006320] ACPI: RSDP 0x00000000000F0E90 000024 (v02 CORE )
[ 0.006326] ACPI: XSDT 0x00000000BFAB10E0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.006335] ACPI: FACP 0x00000000BFAB46D0 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
[ 0.006345] ACPI: DSDT 0x00000000BFAB1280 00344E (v03 COREv4 COREBOOT 20090419 INTL 20160318)
[ 0.006351] ACPI: FACS 0x00000000BFAB1240 000040
[ 0.006356] ACPI: SSDT 0x00000000BFAB47D0 000594 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.006362] ACPI: MCFG 0x00000000BFAB4D70 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.006368] ACPI: TCPA 0x00000000BFAB4DB0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.006374] ACPI: APIC 0x00000000BFAB4DF0 000068 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.006379] ACPI: DMAR 0x00000000BFAB4E60 0000A8 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.006385] ACPI: HPET 0x00000000BFAB4F10 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.006399] ACPI: Local APIC address 0xfee00000
[ 0.006524] No NUMA configuration found
[ 0.006526] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[ 0.006531] NODE_DATA(0) allocated [mem 0x22fff8000-0x22fffbfff]
[ 0.006576] Zone ranges:
[ 0.006577] DMA32 [mem 0x0000000000001000-0x00000000ffffffff]
[ 0.006580] Normal [mem 0x0000000100000000-0x000000022fffffff]
[ 0.006582] Device empty
[ 0.006583] Movable zone start for each node
[ 0.006585] Early memory node ranges
[ 0.006586] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.006588] node 0: [mem 0x0000000000100000-0x00000000bfa9ffff]
[ 0.006589] node 0: [mem 0x0000000100000000-0x000000022fffffff]
[ 0.006641] Zeroed struct page in unavailable ranges: 1473 pages
[ 0.006643] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[ 0.006645] On node 0 totalpages: 2030143
[ 0.006647] DMA32 zone: 12265 pages used for memmap
[ 0.006648] DMA32 zone: 22 pages reserved
[ 0.006650] DMA32 zone: 784959 pages, LIFO batch:63
[ 0.043724] Normal zone: 19456 pages used for memmap
[ 0.043726] Normal zone: 1245184 pages, LIFO batch:63
[ 0.099342] Reserving Intel graphics memory at [mem 0xc0000000-0xcfffffff]
[ 0.099688] ACPI: PM-Timer IO Port: 0x508
[ 0.099692] ACPI: Local APIC address 0xfee00000
[ 0.099707] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.099708] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.099723] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.099727] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.099730] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.099732] ACPI: IRQ0 used by override.
[ 0.099734] ACPI: IRQ9 used by override.
[ 0.099737] Using ACPI (MADT) for SMP configuration information
[ 0.099740] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.099749] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.099768] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.099771] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[ 0.099772] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.099775] PM: Registered nosave memory: [mem 0xbfaa0000-0xbfbfffff]
[ 0.099776] PM: Registered nosave memory: [mem 0xbfc00000-0xcfffffff]
[ 0.099777] PM: Registered nosave memory: [mem 0xd0000000-0xefffffff]
[ 0.099778] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.099779] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.099783] [mem 0xd0000000-0xefffffff] available for PCI devices
[ 0.099785] Booting paravirtualized kernel on bare hardware
[ 0.099791] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.099811] random: get_random_bytes called from start_kernel+0x99/0x50c with crng_init=0
[ 0.099822] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.100645] percpu: Embedded 45 pages/cpu s147032 r8192 d29096 u1048576
[ 0.100654] pcpu-alloc: s147032 r8192 d29096 u1048576 alloc=1*2097152
[ 0.100656] pcpu-alloc: [0] 0 1
[ 0.100688] Built 1 zonelists, mobility grouping on. Total pages: 1998400
[ 0.100690] Policy zone: Normal
[ 0.100693] Kernel command line: BOOT_IMAGE=/gnu/store/v0ziysnm86c9bi8wh8pf6cckkdzqsyjf-linux-libre-5.0.14/bzImage --root=rg-root --system=/gnu/store/kvzm4plj05mn11jb453a3f6mlpbmh7zv-system --load=/gnu/store/kvzm4plj05mn11jb453a3f6mlpbmh7zv-system/boot quiet
[ 0.123495] Calgary: detecting Calgary via BIOS EBDA area
[ 0.123499] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.123517] ------------[ cut here ]------------
[ 0.123521] Your BIOS is broken; DMAR reported at address fed92000 returns all ones!
BIOS vendor: coreboot; Ver: CBET4000 3774c98; Product Version: ThinkPad X200 Tablet
[ 0.123562] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:848 warn_invalid_dmar.part.10+0x5c/0x70
[ 0.123563] Modules linked in:
[ 0.123568] CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.14-gnu #1
[ 0.123570] Hardware name: LENOVO 744944U/744944U, BIOS CBET4000 3774c98 09/07/2016
[ 0.123573] RIP: 0010:warn_invalid_dmar.part.10+0x5c/0x70
[ 0.123576] Code: 1e 00 bf 01 00 00 00 49 89 c5 e8 3f f5 1e 00 4d 89 f1 4d 89 e8 48 89 c1 4c 89 e2 48 89 de 48 c7 c7 28 2b 10 91 e8 34 91 a5 ff <0f> 0b 5b 41 5c 41 5d 41 5e 5d c3 66 0f 1f 84 00 00 00 00 00 e8 db
[ 0.123578] RSP: 0000:ffffffff91203da0 EFLAGS: 00010086
[ 0.123580] RAX: 0000000000000000 RBX: 00000000fed92000 RCX: ffffffff9125e128
[ 0.123582] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000047
[ 0.123583] RBP: ffffffff91203dc0 R08: 000000000000007b R09: 0000000000000004
[ 0.123585] R10: ffffffff91203d80 R11: 0000000000000001 R12: ffffffff91103466
[ 0.123586] R13: ffffffff9180000c R14: ffffffff9180003c R15: ffffffffff200ec8
[ 0.123589] FS: 0000000000000000(0000) GS:ffff8ba727e00000(0000) knlGS:0000000000000000
[ 0.123590] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.123592] CR2: ffff8ba72ffff000 CR3: 000000019a20e000 CR4: 00000000000406b0
[ 0.123594] Call Trace:
[ 0.123603] dmar_validate_one_drhd+0x84/0xe0
[ 0.123606] dmar_walk_remapping_entries+0xa9/0x1d0
[ 0.123611] detect_intel_iommu+0x66/0xef
[ 0.123614] ? xen_swiotlb_init+0x4d0/0x4d0
[ 0.123619] pci_iommu_alloc+0x55/0x71
[ 0.123622] mem_init+0x1c/0xbc
[ 0.123625] start_kernel+0x28b/0x50c
[ 0.123628] x86_64_start_reservations+0x24/0x26
[ 0.123631] x86_64_start_kernel+0x6f/0x72
[ 0.123635] secondary_startup_64+0xa4/0xb0
[ 0.123641] ---[ end trace 6e8574a8f3a8298f ]---
[ 0.205398] Memory: 7888092K/8120572K available (12291K kernel code, 1488K rwdata, 3892K rodata, 1840K init, 2704K bss, 232480K reserved, 0K cma-reserved)
[ 0.205597] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.205611] Kernel/User page tables isolation: enabled
[ 0.205648] ftrace: allocating 39602 entries in 155 pages
[ 0.243535] rcu: Hierarchical RCU implementation.
[ 0.243538] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.243540] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.243541] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.249939] NR_IRQS: 16640, nr_irqs: 440, preallocated irqs: 16
[ 0.250219] spurious 8259A interrupt: IRQ7.
[ 0.250246] Console: colour dummy device 80x25
[ 0.250253] printk: console [tty0] enabled
[ 0.250287] ACPI: Core revision 20181213
[ 0.250491] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.250504] hpet clockevent registered
[ 0.250511] APIC: Switch to symmetric I/O mode setup
[ 0.250514] DMAR: Host address width 36
[ 0.250515] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.250523] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30260 ecap 1000
[ 0.250525] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.250530] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c0000020630260 ecap 1000
[ 0.250531] DMAR: DRHD base: 0x000000fed92000 flags: 0x0
[ 0.250541] DMAR: Failed to map dmar2
[ 0.250546] DMAR: Parse DMAR table failure.
[ 0.250980] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.270512] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1ebfedd68bb, max_idle_ns: 440795216877 ns
[ 0.270533] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.52 BogoMIPS (lpj=8533048)
[ 0.270537] pid_max: default: 32768 minimum: 301
[ 0.270593] LSM: Security Framework initializing
[ 0.270595] Yama: becoming mindful.
[ 0.270626] AppArmor: AppArmor initialized
[ 0.274181] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.276568] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.276671] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.276748] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.277213] mce: CPU supports 6 MCE banks
[ 0.277229] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.277233] process: using mwait in idle threads
[ 0.277239] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.277240] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.277244] Spectre V2 : Mitigation: Full generic retpoline
[ 0.277246] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.277247] Speculative Store Bypass: Vulnerable
[ 0.277478] Freeing SMP alternatives memory: 28K
[ 0.282514] smpboot: CPU0: Intel(R) Core(TM)2 CPU L9600 @ 2.13GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.282514] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.282514] ... version: 2
[ 0.282514] ... bit width: 40
[ 0.282514] ... generic registers: 2
[ 0.282514] ... value mask: 000000ffffffffff
[ 0.282514] ... max period: 000000007fffffff
[ 0.282514] ... fixed-purpose events: 3
[ 0.282514] ... event mask: 0000000700000003
[ 0.282514] rcu: Hierarchical SRCU implementation.
[ 0.282514] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.282514] smp: Bringing up secondary CPUs ...
[ 0.282514] x86: Booting SMP configuration:
[ 0.282514] .... node #0, CPUs: #1
[ 0.282608] smp: Brought up 1 node, 2 CPUs
[ 0.282608] smpboot: Max logical packages: 1
[ 0.282608] smpboot: Total of 2 processors activated (8533.04 BogoMIPS)
[ 0.287171] devtmpfs: initialized
[ 0.287171] x86/mm: Memory block size: 128MB
[ 0.290901] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.290909] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.290984] pinctrl core: initialized pinctrl subsystem
[ 0.291170] RTC time: 13:56:18, date: 2019-05-09
[ 0.291330] NET: Registered protocol family 16
[ 0.291515] audit: initializing netlink subsys (disabled)
[ 0.291526] audit: type=2000 audit(1557410178.040:1): state=initialized audit_enabled=0 res=1
[ 0.291526] cpuidle: using governor ladder
[ 0.291526] cpuidle: using governor menu
[ 0.291526] ACPI: bus type PCI registered
[ 0.291526] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.291526] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.291526] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.291526] PCI: Using configuration type 1 for base access
[ 0.295001] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.295001] ACPI: Added _OSI(Module Device)
[ 0.295001] ACPI: Added _OSI(Processor Device)
[ 0.295001] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.295001] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.295001] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.295001] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.295001] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.298936] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.299937] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.300772] ACPI: EC: EC started
[ 0.300774] ACPI: EC: interrupt blocked
[ 0.300890] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[ 0.300893] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.300896] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[ 0.300897] ACPI: Interpreter enabled
[ 0.300926] ACPI: (supports S0 S3 S4 S5)
[ 0.300928] ACPI: Using IOAPIC for interrupt routing
[ 0.300961] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.301222] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.311420] acpi ACPI0003:01: ACPI dock station (docks/bays count: 1)
[ 0.311844] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.311851] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.311925] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.311939] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.312343] PCI host bridge to bus 0000:00
[ 0.312347] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.312350] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.312352] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.312355] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.312357] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.312359] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.312362] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.312364] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.312366] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.312369] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.312371] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.312373] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.312376] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.312378] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.312380] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.312383] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.312385] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[ 0.312388] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.312390] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.312403] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.312437] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.312438] DMAR: Forcing write-buffer flush capability
[ 0.312585] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.312603] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.312613] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.312620] pci 0000:00:02.0: reg 0x20: [io 0x3400-0x3407]
[ 0.312640] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.312790] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.312807] pci 0000:00:02.1: reg 0x10: [mem 0xe1400000-0xe14fffff 64bit]
[ 0.313019] pci 0000:00:19.0: [8086:10f5] type 00 class 0x020000
[ 0.313051] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 0.313064] pci 0000:00:19.0: reg 0x14: [mem 0xe1624000-0xe1624fff]
[ 0.313077] pci 0000:00:19.0: reg 0x18: [io 0x3000-0x301f]
[ 0.313174] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.313320] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.313389] pci 0000:00:1a.0: reg 0x20: [io 0x3020-0x303f]
[ 0.313593] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.313661] pci 0000:00:1a.1: reg 0x20: [io 0x3040-0x305f]
[ 0.313862] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.313931] pci 0000:00:1a.2: reg 0x20: [io 0x3060-0x307f]
[ 0.314139] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.314170] pci 0000:00:1a.7: reg 0x10: [mem 0xe1626000-0xe16263ff]
[ 0.314287] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.314449] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.314484] pci 0000:00:1b.0: reg 0x10: [mem 0xe1620000-0xe1623fff 64bit]
[ 0.314613] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.314780] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.314904] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.315084] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.315217] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.315394] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.315517] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.315693] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.315826] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.316004] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.316073] pci 0000:00:1d.0: reg 0x20: [io 0x3080-0x309f]
[ 0.316275] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.316344] pci 0000:00:1d.1: reg 0x20: [io 0x30a0-0x30bf]
[ 0.316546] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.316615] pci 0000:00:1d.2: reg 0x20: [io 0x30c0-0x30df]
[ 0.316823] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.316855] pci 0000:00:1d.7: reg 0x10: [mem 0xe1627000-0xe16273ff]
[ 0.316973] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.317137] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.317352] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.317655] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.317687] pci 0000:00:1f.2: reg 0x10: [io 0x3408-0x340f]
[ 0.317699] pci 0000:00:1f.2: reg 0x14: [io 0x3418-0x341b]
[ 0.317712] pci 0000:00:1f.2: reg 0x18: [io 0x3410-0x3417]
[ 0.317725] pci 0000:00:1f.2: reg 0x1c: [io 0x341c-0x341f]
[ 0.317738] pci 0000:00:1f.2: reg 0x20: [io 0x30e0-0x30ff]
[ 0.317751] pci 0000:00:1f.2: reg 0x24: [mem 0xe1625000-0xe16257ff]
[ 0.317824] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.317978] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.318009] pci 0000:00:1f.3: reg 0x10: [mem 0xe1628000-0xe16280ff 64bit]
[ 0.318043] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.318284] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.318390] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[ 0.318441] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe151ffff 64bit]
[ 0.318521] pci 0000:02:00.0: reg 0x30: [mem 0xe1520000-0xe152ffff pref]
[ 0.318638] pci 0000:02:00.0: supports D1
[ 0.318640] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.330549] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.330558] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.330642] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.330768] acpiphp: Slot [1] registered
[ 0.330777] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.330782] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.330788] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.330796] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.330826] pci_bus 0000:05: extended config space not accessible
[ 0.330997] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.331013] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.331015] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.331018] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.331021] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[ 0.331023] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[ 0.331026] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[ 0.331028] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[ 0.331031] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.331033] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.331035] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.331038] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.331040] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.331043] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.331046] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[ 0.331048] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[ 0.331051] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[ 0.331053] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff window] (subtractive decode)
[ 0.331056] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[ 0.331288] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.331378] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.331464] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.331556] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.331641] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.331727] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.331813] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.331898] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.334201] ACPI: EC: interrupt unblocked
[ 0.334232] ACPI: EC: event unblocked
[ 0.334244] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.334246] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[ 0.334409] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.334409] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.334409] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.334409] vgaarb: loaded
[ 0.334817] SCSI subsystem initialized
[ 0.334859] libata version 3.00 loaded.
[ 0.334859] ACPI: bus type USB registered
[ 0.334859] usbcore: registered new interface driver usbfs
[ 0.334859] usbcore: registered new interface driver hub
[ 0.334859] usbcore: registered new device driver usb
[ 0.334859] EDAC MC: Ver: 3.0.0
[ 0.334859] PCI: Using ACPI for IRQ routing
[ 0.337179] PCI: pci_cache_line_size set to 64 bytes
[ 0.337267] e820: reserve RAM buffer [mem 0xbfaa0000-0xbfffffff]
[ 0.337447] NetLabel: Initializing
[ 0.337448] NetLabel: domain hash size = 128
[ 0.337449] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.337478] NetLabel: unlabeled traffic allowed by default
[ 0.337508] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.337508] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.337508] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.338555] clocksource: Switched to clocksource tsc-early
[ 0.365147] VFS: Disk quotas dquot_6.6.0
[ 0.365182] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.365402] AppArmor: AppArmor Filesystem Enabled
[ 0.365462] pnp: PnP ACPI init
[ 0.365677] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.365680] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.365683] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.365686] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.365689] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.365691] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.365694] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.365697] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.365707] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.366676] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.366685] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.366784] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.366786] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.366789] system 00:02: [io 0x0580-0x05bf] has been reserved
[ 0.366797] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.366842] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.366906] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.366963] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.367022] pnp 00:06: Plug and Play ACPI device, IDs WACf004 (active)
[ 0.367296] pnp: PnP ACPI: found 7 devices
[ 0.374907] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.374971] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.374990] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.374998] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.375009] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.375025] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 0.375029] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.375036] pci 0000:00:1c.3: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.375042] pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.375051] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.375068] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.375070] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.375073] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.375075] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.375078] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.375080] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.375083] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.375085] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.375088] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.375090] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.375092] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.375095] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.375097] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.375100] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.375102] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.375105] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.375107] pci_bus 0000:00: resource 20 [mem 0xd0000000-0xfebfffff window]
[ 0.375109] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.375112] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.375115] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.375117] pci_bus 0000:04: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 0.375120] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.375122] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.375125] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.375127] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.375129] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.375132] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.375134] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.375137] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.375139] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.375141] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.375144] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.375146] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.375148] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.375151] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.375153] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.375155] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.375158] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.375160] pci_bus 0000:05: resource 20 [mem 0xd0000000-0xfebfffff window]
[ 0.375163] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.375297] NET: Registered protocol family 2
[ 0.375593] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.375671] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.375970] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.376420] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.376495] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.376558] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.376669] NET: Registered protocol family 1
[ 0.376691] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.379074] PCI: CLS 64 bytes, default 64
[ 0.379139] Trying to unpack rootfs image as initramfs...
[ 0.830924] Freeing initrd memory: 14368K
[ 0.830995] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.830998] software IO TLB: mapped [mem 0xbbaa0000-0xbfaa0000] (64MB)
[ 0.831215] check: Scanning for low memory corruption every 60 seconds
[ 0.832385] Initialise system trusted keyrings
[ 0.832480] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.835585] zbud: loaded
[ 0.837011] Allocating IMA blacklist keyring.
[ 0.840912] Key type asymmetric registered
[ 0.840914] Asymmetric key parser 'x509' registered
[ 0.840930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.841497] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[ 0.841858] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[ 0.842182] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[ 0.842522] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[ 0.842650] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.842710] efifb: probing for efifb
[ 0.842715] efi: EFI_MEMMAP is not enabled.
[ 0.842740] efifb: framebuffer at 0xd0000000, using 4032k, total 4032k
[ 0.842742] efifb: mode is 1280x800x32, linelength=5120, pages=1
[ 0.842743] efifb: scrolling: redraw
[ 0.842746] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.847110] Console: switching to colour frame buffer device 160x50
[ 0.850829] fb0: EFI VGA frame buffer device
[ 0.850846] intel_idle: does not run on family 6 model 23
[ 0.851205] ACPI: AC Adapter [AC] (on-line)
[ 0.851318] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input0
[ 0.851340] ACPI: Sleep Button [SLPB]
[ 0.851413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input1
[ 0.851425] ACPI: Lid Switch [LID]
[ 0.851506] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.851519] ACPI: Power Button [PWRF]
[ 0.853026] Monitor-Mwait will be used to enter C-1 state
[ 0.853034] Monitor-Mwait will be used to enter C-2 state
[ 0.853039] Monitor-Mwait will be used to enter C-3 state
[ 0.853043] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.853221] clocksource: Switched to clocksource hpet
[ 0.854785] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.854787] ACPI: Thermal Zone [THM0] (49 C)
[ 0.855913] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.855915] ACPI: Thermal Zone [THM1] (43 C)
[ 0.856837] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.857722] 00:06: ttyS4 at I/O 0x200 (irq = 5, base_baud = 921600) is a NS16550A
[ 0.877664] Linux agpgart interface v0.103
[ 0.878431] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 0.878705] battery: ACPI: Battery Slot [BAT1] (battery absent)
[ 0.883870] brd: module loaded
[ 0.887001] loop: module loaded
[ 0.887701] libphy: Fixed MDIO Bus: probed
[ 0.887703] tun: Universal TUN/TAP device driver, 1.6
[ 0.887804] PPP generic driver version 2.4.2
[ 0.887921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.887927] ehci-pci: EHCI PCI platform driver
[ 0.888140] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.888149] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.888165] ehci-pci 0000:00:1a.7: debug port 1
[ 0.892081] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 0.892108] ehci-pci 0000:00:1a.7: irq 18, io mem 0xe1626000
[ 0.906764] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.906870] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 0.906873] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.906875] usb usb1: Product: EHCI Host Controller
[ 0.906878] usb usb1: Manufacturer: Linux 5.0.14-gnu ehci_hcd
[ 0.906880] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.907184] hub 1-0:1.0: USB hub found
[ 0.907200] hub 1-0:1.0: 6 ports detected
[ 0.907807] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.907820] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.907837] ehci-pci 0000:00:1d.7: debug port 1
[ 0.911765] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.911789] ehci-pci 0000:00:1d.7: irq 16, io mem 0xe1627000
[ 0.930771] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.930884] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[ 0.930888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.930890] usb usb2: Product: EHCI Host Controller
[ 0.930893] usb usb2: Manufacturer: Linux 5.0.14-gnu ehci_hcd
[ 0.930895] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.931199] hub 2-0:1.0: USB hub found
[ 0.931218] hub 2-0:1.0: 6 ports detected
[ 0.931618] ehci-platform: EHCI generic platform driver
[ 0.931651] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.931662] ohci-pci: OHCI PCI platform driver
[ 0.931687] ohci-platform: OHCI generic platform driver
[ 0.931704] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.931912] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.931925] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.931935] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.931970] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003020
[ 0.932070] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 0.932073] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.932075] usb usb3: Product: UHCI Host Controller
[ 0.932078] usb usb3: Manufacturer: Linux 5.0.14-gnu uhci_hcd
[ 0.932080] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.932342] hub 3-0:1.0: USB hub found
[ 0.932354] hub 3-0:1.0: 2 ports detected
[ 0.932723] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.932732] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.932741] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.932786] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00003040
[ 0.932859] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 0.932862] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.932864] usb usb4: Product: UHCI Host Controller
[ 0.932866] usb usb4: Manufacturer: Linux 5.0.14-gnu uhci_hcd
[ 0.932869] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.933071] hub 4-0:1.0: USB hub found
[ 0.933081] hub 4-0:1.0: 2 ports detected
[ 0.933409] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.933418] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.933426] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 0.933450] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00003060
[ 0.933522] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 0.933525] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.933527] usb usb5: Product: UHCI Host Controller
[ 0.933530] usb usb5: Manufacturer: Linux 5.0.14-gnu uhci_hcd
[ 0.933532] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.933737] hub 5-0:1.0: USB hub found
[ 0.933747] hub 5-0:1.0: 2 ports detected
[ 0.934082] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.934094] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.934103] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.934126] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 0.934204] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 0.934207] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.934210] usb usb6: Product: UHCI Host Controller
[ 0.934212] usb usb6: Manufacturer: Linux 5.0.14-gnu uhci_hcd
[ 0.934214] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.934418] hub 6-0:1.0: USB hub found
[ 0.934428] hub 6-0:1.0: 2 ports detected
[ 0.934775] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.934784] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.934793] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.934816] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000030a0
[ 0.934889] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 0.934892] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.934894] usb usb7: Product: UHCI Host Controller
[ 0.934896] usb usb7: Manufacturer: Linux 5.0.14-gnu uhci_hcd
[ 0.934899] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.935108] hub 7-0:1.0: USB hub found
[ 0.935119] hub 7-0:1.0: 2 ports detected
[ 0.935447] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.935455] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.935464] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.935488] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000030c0
[ 0.935563] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[ 0.935566] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.935568] usb usb8: Product: UHCI Host Controller
[ 0.935570] usb usb8: Manufacturer: Linux 5.0.14-gnu uhci_hcd
[ 0.935573] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.935772] hub 8-0:1.0: USB hub found
[ 0.935783] hub 8-0:1.0: 2 ports detected
[ 0.936069] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.947262] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.947269] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.947565] mousedev: PS/2 mouse device common for all mice
[ 0.947991] rtc_cmos 00:03: RTC can wake from S4
[ 0.948243] rtc_cmos 00:03: registered as rtc0
[ 0.948275] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.948290] i2c /dev entries driver
[ 0.948466] device-mapper: uevent: version 1.0.3
[ 0.948619] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 0.948693] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.949127] NET: Registered protocol family 10
[ 0.949526] Segment Routing with IPv6
[ 0.949568] NET: Registered protocol family 17
[ 0.949697] Key type dns_resolver registered
[ 0.949975] microcode: sig=0x1067a, pf=0x80, revision=0x0
[ 0.950108] microcode: Microcode Update Driver: v2.2.
[ 0.950483] registered taskstats version 1
[ 0.950488] Loading compiled-in X.509 certificates
[ 0.950512] zswap: loaded using pool lzo/zbud
[ 0.952200] Key type big_key registered
[ 0.952857] Key type trusted registered
[ 0.953554] Key type encrypted registered
[ 0.953558] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.953566] ima: No TPM chip found, activating TPM-bypass!
[ 0.953571] ima: Allocated hash algorithm: sha1
[ 0.953580] No architecture policies found
[ 0.953594] evm: Initialising EVM extended attributes:
[ 0.953596] evm: security.selinux
[ 0.953597] evm: security.SMACK64
[ 0.953598] evm: security.SMACK64EXEC
[ 0.953599] evm: security.SMACK64TRANSMUTE
[ 0.953600] evm: security.SMACK64MMAP
[ 0.953601] evm: security.apparmor
[ 0.953602] evm: security.ima
[ 0.953603] evm: security.capability
[ 0.953604] evm: HMAC attrs: 0x1
[ 0.954283] Magic number: 3:937:937
[ 0.954312] misc lightnvm: hash matches
[ 0.954367] acpi PNP0103:00: hash matches
[ 0.954471] rtc_cmos 00:03: setting system clock to 2019-05-09T13:56:19 UTC (1557410179)
[ 0.955997] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.956088] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 0.958509] Freeing unused kernel image memory: 1840K
[ 0.962302] random: fast init done
[ 0.978588] Write protecting the kernel read-only data: 18432k
[ 0.979517] Freeing unused kernel image memory: 2036K
[ 0.979725] Freeing unused kernel image memory: 204K
[ 0.979771] Run /init as init process
[ 1.068855] ahci 0000:00:1f.2: version 3.0
[ 1.069079] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.069105] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.069108] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ccc
[ 1.069723] scsi host0: ahci
[ 1.070016] scsi host1: ahci
[ 1.070294] scsi host2: ahci
[ 1.070566] scsi host3: ahci
[ 1.070686] ata1: SATA max UDMA/133 abar m2048@0xe1625000 port 0xe1625100 irq 28
[ 1.070689] ata2: SATA max UDMA/133 abar m2048@0xe1625000 port 0xe1625180 irq 28
[ 1.070690] ata3: DUMMY
[ 1.070691] ata4: DUMMY
[ 1.390651] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.391279] ata1.00: ATA-8: SAMSUNG SSD PM830 2.5" 7mm 128GB, CXM03D1Q, max UDMA/133
[ 1.391281] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.391742] ata1.00: configured for UDMA/133
[ 1.391942] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 3D1Q PQ: 0 ANSI: 5
[ 1.392249] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.392279] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.392294] sd 0:0:0:0: [sda] Write Protect is off
[ 1.392296] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.392337] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.394267] sda: sda1
[ 1.394778] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.446620] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 1.474618] usb 7-2: new full-speed USB device number 2 using uhci_hcd
[ 1.638671] usb 4-1: New USB device found, idVendor=08ff, idProduct=2810, bcdDevice=17.03
[ 1.638674] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.638676] usb 4-1: Product: Fingerprint Sensor
[ 1.675668] usb 7-2: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91
[ 1.675672] usb 7-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.675674] usb 7-2: Product: CSR8510 A10
[ 1.710647] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.713370] usbcore: registered new interface driver usb-storage
[ 1.715896] usbcore: registered new interface driver uas
[ 1.718004] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.718741] usbcore: registered new interface driver usbhid
[ 1.718742] usbhid: USB HID core driver
[ 1.740336] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[ 1.826527] raid6: sse2x4 gen() 7212 MB/s
[ 1.894526] raid6: sse2x4 xor() 5308 MB/s
[ 1.962543] raid6: sse2x2 gen() 4463 MB/s
[ 2.030524] raid6: sse2x2 xor() 4945 MB/s
[ 2.098525] raid6: sse2x1 gen() 3677 MB/s
[ 2.166522] raid6: sse2x1 xor() 4003 MB/s
[ 2.166523] raid6: using algorithm sse2x4 gen() 7212 MB/s
[ 2.166524] raid6: .... xor() 5308 MB/s, rmw enabled
[ 2.166525] raid6: using ssse3x2 recovery algorithm
[ 2.167063] xor: measuring software checksum speed
[ 2.206525] prefetch64-sse: 9579.000 MB/sec
[ 2.246524] generic_sse: 8458.000 MB/sec
[ 2.246526] xor: using function: prefetch64-sse (9579.000 MB/sec)
[ 2.258211] Btrfs loaded, crc32c=crc32c-generic
[ 8.155036] random: crng init done
[ 13.586929] device-mapper: crypt: xts(serpent) using implementation "xts(ecb(serpent-generic))"
[ 13.704797] device-mapper: crypt: xts(serpent) using implementation "xts(ecb(serpent-generic))"
[ 13.763603] BTRFS: device label rg-root devid 1 transid 72486 /dev/mapper/rg-root
[ 13.764847] BTRFS info (device dm-0): disk space caching is enabled
[ 13.764850] BTRFS info (device dm-0): has skinny extents
[ 13.810578] BTRFS info (device dm-0): enabling ssd optimizations
[ 14.734164] shepherd[1]: Service root has been started.
[ 15.432850] shepherd[1]: starting services...
[ 15.435311] shepherd[1]: Service root-file-system has been started.
[ 15.437619] shepherd[1]: Service user-file-systems has been started.
[ 15.451041] shepherd[1]: waiting for udevd...
[ 15.526656] udevd[237]: starting version 3.2.7
[ 15.729155] udevd[237]: starting eudev-3.2.7
[ 15.951979] udevd[237]: no sender credentials received, message ignored
[ 16.103828] pps_core: LinuxPPS API ver. 1 registered
[ 16.103829] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 16.107711] PTP clock support registered
[ 16.131702] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 16.131704] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 16.131937] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 16.176777] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 16.178413] acpi device:04: registered as cooling_device2
[ 16.178484] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 16.325962] Non-volatile memory driver v1.3
[ 16.341524] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 16.341525] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 16.341526] thinkpad_acpi: ThinkPad BIOS CBET4000 3774c98, EC 7WHT17WW-3.6
[ 16.341528] thinkpad_acpi: Lenovo ThinkPad X200 Tablet, model 744944U
[ 16.341790] pci 0000:00:00.0: Intel GM45 Chipset
[ 16.341814] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 16.343433] pci 0000:00:00.0: detected 262144K stolen memory
[ 16.346486] checking generic (d0000000 3f0000) vs hw (d0000000 10000000)
[ 16.346487] fb0: switching to inteldrmfb from EFI VGA
[ 16.346565] Console: switching to colour dummy device 80x25
[ 16.347362] [drm] Replacing VGA console driver
[ 16.347406] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 16.347407] [drm] Driver supports precise vblank timestamp query.
[ 16.347426] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[ 16.347432] caller pci_map_rom+0x6f/0x1e0 mapping multiple BARs
[ 16.347435] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 16.347437] [drm] Failed to find VBIOS tables (VBT)
[ 16.348102] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 16.348103] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 16.352828] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 16.352921] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 16.354781] thinkpad_acpi: battery 1 registered (start 0, stop 0)
[ 16.354786] battery: new extension: ThinkPad Battery Extension
[ 16.354844] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 16.360216] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:26:2d:f1:13:19
[ 16.360219] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 16.360249] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 16.363855] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 16.411428] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20181213/utaddress-213)
[ 16.411435] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.411438] ACPI Warning: SystemIO range 0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20181213/utaddress-213)
[ 16.411442] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.411443] ACPI Warning: SystemIO range 0x0000000000000580-0x00000000000005AF conflicts with OpRegion 0x0000000000000580-0x00000000000005BB (\GPIO) (20181213/utaddress-213)
[ 16.411447] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.411448] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.412078] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.412941] snd_hda_codec_conexant hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 16.413503] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20561 (Hermosa): line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 16.413505] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.413507] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 16.413509] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ 16.413511] snd_hda_codec_conexant hdaudioC0D0: dig-out=0x1c/0x0
[ 16.413512] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ 16.413515] snd_hda_codec_conexant hdaudioC0D0: Mic=0x18
[ 16.413517] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1d
[ 16.413519] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x17
[ 16.414632] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ 16.418139] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 16.418220] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 16.418293] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 16.418368] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 16.461999] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 16.516114] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 16.533650] Error: Driver 'pcspkr' is already registered, aborting...
[ 16.534819] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.536421] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 16.536424] cfg80211: failed to load regulatory.db
[ 16.588331] udevd[239]: Unknown key identifier 'direction'
[ 16.689707] [drm] RC6 disabled, disabling runtime PM support
[ 16.695438] intel_powerclamp: No package C-state available
[ 16.700278] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[ 16.707663] ath: EEPROM regdomain: 0x6a
[ 16.707664] ath: EEPROM indicates we should expect a direct regpair map
[ 16.707667] ath: Country alpha2 being used: 00
[ 16.707667] ath: Regpair used: 0x6a
[ 16.845089] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 16.856598] iTCO_vendor_support: vendor-support=0
[ 16.864441] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 16.864498] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0560)
[ 16.864793] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.927829] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 16.928261] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb6f9c13a0000, irq=17
[ 16.965585] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 16.989826] Bluetooth: Core ver 2.22
[ 16.989843] NET: Registered protocol family 31
[ 16.989844] Bluetooth: HCI device and connection manager initialized
[ 16.989850] Bluetooth: HCI socket layer initialized
[ 16.989852] Bluetooth: L2CAP socket layer initialized
[ 16.989857] Bluetooth: SCO socket layer initialized
[ 17.099745] usbcore: registered new interface driver btusb
[ 17.313375] fbcon: inteldrmfb (fb0) is primary device
[ 17.384702] psmouse serio1: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 17.402335] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input12
[ 17.639482] Console: switching to colour frame buffer device 160x50
[ 17.659078] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 17.733619] shepherd[1]: Service udev has been started.
[ 17.736758] shepherd[1]: Service file-system-/dev/pts has been started.
[ 17.739538] shepherd[1]: Service file-system-/dev/shm has been started.
[ 17.742270] shepherd[1]: Service file-system-/gnu/store has been started.
[ 17.745075] shepherd[1]: Service file-system-/run/systemd has been started.
[ 17.747890] shepherd[1]: Service file-system-/run/user has been started.
[ 17.750629] shepherd[1]: Service file-system-/sys/fs/cgroup has been started.
[ 17.753555] shepherd[1]: Service file-system-/sys/fs/cgroup/elogind has been started.
[ 17.756980] shepherd[1]: Service file-system-/sys/fs/cgroup/cpuset has been started.
[ 17.759966] shepherd[1]: Service file-system-/sys/fs/cgroup/cpu has been started.
[ 17.762852] shepherd[1]: Service file-system-/sys/fs/cgroup/cpuacct has been started.
[ 17.768073] shepherd[1]: Service file-system-/sys/fs/cgroup/memory has been started.
[ 17.770964] shepherd[1]: Service file-system-/sys/fs/cgroup/devices has been started.
[ 17.773805] shepherd[1]: Service file-system-/sys/fs/cgroup/freezer has been started.
[ 17.776953] shepherd[1]: Service file-system-/sys/fs/cgroup/blkio has been started.
[ 17.779831] shepherd[1]: Service file-system-/sys/fs/cgroup/perf_event has been started.
[ 17.782195] shepherd[1]: Service file-systems has been started.
[ 17.795568] shepherd[1]: Service urandom-seed has been started.
[ 17.797991] shepherd[1]: Service user-processes has been started.
[ 17.800480] shepherd[1]: Service host-name has been started.
[ 17.805011] shepherd[1]: Service user-homes has been started.
[ 18.813964] shepherd[1]: Service nscd has been started.
[ 18.819911] shepherd[1]: Service guix-daemon has been started.
[ 38.689746] thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
[ 38.689753] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG: evaluate failed
[ 38.736652] thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
[ 38.736660] ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG: evaluate failed
[ 45.700769] wlp2s0: authenticate with 34:8a:ae:66:6b:96
[ 45.718243] wlp2s0: send auth to 34:8a:ae:66:6b:96 (try 1/3)
[ 45.744480] wlp2s0: authenticated
[ 45.746961] wlp2s0: associate with 34:8a:ae:66:6b:96 (try 1/3)
[ 45.774938] wlp2s0: RX AssocResp from 34:8a:ae:66:6b:96 (capab=0x431 status=0 aid=2)
[ 45.775059] wlp2s0: associated
[ 45.795381] ath: EEPROM regdomain: 0x807c
[ 45.795383] ath: EEPROM indicates we should expect a country code
[ 45.795384] ath: doing EEPROM country->regdmn map search
[ 45.795385] ath: country maps to regdmn code: 0x3a
[ 45.795386] ath: Country alpha2 being used: CA
[ 45.795387] ath: Regpair used: 0x3a
[ 45.795389] ath: regdomain 0x807c dynamically updated by country element
[ 46.210962] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 62.639870] fuse init (API version 7.28)
root@secondary ~# dmesg --help
Usage:
dmesg [options]
Display or control the kernel ring buffer.
Options:
-C, --clear clear the kernel ring buffer
-c, --read-clear read and clear all messages
-D, --console-off disable printing messages to console
-E, --console-on enable printing messages to console
-F, --file <file> use the file instead of the kernel log buffer
-f, --facility <list> restrict output to defined facilities
-H, --human human readable output
-k, --kernel display kernel messages
-L, --color[=<when>] colorize messages (auto, always or never)
colors are enabled by default
-l, --level <list> restrict output to defined levels
-n, --console-level <level> set level of messages printed to console
-P, --nopager do not pipe output into a pager
-p, --force-prefix force timestamp output on each line of multi-line messages
-r, --raw print the raw message buffer
-S, --syslog force to use syslog(2) rather than /dev/kmsg
-s, --buffer-size <size> buffer size to query the kernel ring buffer
-u, --userspace display userspace messages
-w, --follow wait for new messages
-x, --decode decode facility and level to readable string
-d, --show-delta show time delta between printed messages
-e, --reltime show local time and time delta in readable format
-T, --ctime show human-readable timestamp (may be inaccurate!)
-t, --notime don't show any timestamp with messages
--time-format <format> show timestamp using the given format:
[delta|reltime|ctime|notime|iso]
Suspending/resume will make ctime and iso timestamps inaccurate.
-h, --help display this help
-V, --version display version
Supported log facilities:
kern - kernel messages
user - random user-level messages
mail - mail system
daemon - system daemons
auth - security/authorization messages
syslog - messages generated internally by syslogd
lpr - line printer subsystem
news - network news subsystem
Supported log levels (priorities):
emerg - system is unusable
alert - action must be taken immediately
crit - critical conditions
err - error conditions
warn - warning conditions
notice - normal but significant condition
info - informational
debug - debug-level messages
For more details see dmesg(1).
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-10 4:41 Tor Service Raghav Gururajan
@ 2019-05-15 21:13 ` Ludovic Courtès
2019-05-16 4:52 ` Raghav Gururajan
` (2 subsequent siblings)
3 siblings, 0 replies; 11+ messages in thread
From: Ludovic Courtès @ 2019-05-15 21:13 UTC (permalink / raw)
To: Raghav Gururajan; +Cc: dannym, help-guix
Hi,
"Raghav Gururajan" <rvgn@disroot.org> skribis:
> When I check tor service with "herd status" as root, tor wasn't running. When I did "herd start tor", I am getting error "service tor failed to start".
Does /var/log/messages contain additional hints?
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-10 4:41 Tor Service Raghav Gururajan
2019-05-15 21:13 ` Ludovic Courtès
@ 2019-05-16 4:52 ` Raghav Gururajan
2019-05-16 7:58 ` Raghav Gururajan
2019-05-17 15:24 ` Raghav Gururajan
3 siblings, 0 replies; 11+ messages in thread
From: Raghav Gururajan @ 2019-05-16 4:52 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: dannym, help-guix
> Does /var/log/messages contain additional hints?
Will look into it and get back to you. :-)
Regards,
RG.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-10 4:41 Tor Service Raghav Gururajan
2019-05-15 21:13 ` Ludovic Courtès
2019-05-16 4:52 ` Raghav Gururajan
@ 2019-05-16 7:58 ` Raghav Gururajan
2019-05-19 14:24 ` Ludovic Courtès
2019-05-19 14:41 ` Raghav Gururajan
2019-05-17 15:24 ` Raghav Gururajan
3 siblings, 2 replies; 11+ messages in thread
From: Raghav Gururajan @ 2019-05-16 7:58 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: dannym, help-guix
>> Does /var/log/messages contain additional hints?
>
> Will look into it and get back to you. :-)
Apr 23 19:55:57 localhost Tor[1]: Tor 0.3.4.11 (git-4fd31340f3355342) running on Linux with Libevent 2.1.8-stable, OpenSSL 1.0.2p, Zlib 1.2.11, Liblzma 5.2.4, and Libzstd 1.3.8.
Apr 23 19:55:57 localhost Tor[1]: Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning
Apr 23 19:55:57 localhost Tor[1]: Read configuration file "/gnu/store/a3gvm19f541951x0b84d3a71v5sxk9h2-torrc".
Apr 23 19:55:57 localhost Tor[1]: Scheduler type KIST has been enabled.
Apr 23 19:55:57 localhost Tor[1]: Opening Socks listener on 127.0.0.1:9050
Apr 23 19:55:57 localhost Tor[1]: Parsing GEOIP IPv4 file /gnu/store/0mnwmb670xxzqanqbamjmli7nm0dlpyn-tor-0.3.4.11/share/tor/geoip.
Apr 23 19:55:57 localhost Tor[1]: Parsing GEOIP IPv6 file /gnu/store/0mnwmb670xxzqanqbamjmli7nm0dlpyn-tor-0.3.4.11/share/tor/geoip6.
Apr 23 19:55:57 localhost Tor[1]: Bootstrapped 0%: Starting
Apr 23 19:55:57 localhost Tor[1]: Starting with guard context "default"
Apr 23 15:55:58 localhost shepherd[1]: Service tor has been started.
Apr 23 15:55:58 localhost shepherd[1]: Service iptables has been started.
Apr 23 19:55:58 localhost Tor[1]: Bootstrapped 5%: Connecting to directory server
Apr 23 19:55:58 localhost Tor[1]: Bootstrapped 10%: Finishing handshake with directory server
Apr 23 19:55:59 localhost Tor[1]: Bootstrapped 15%: Establishing an encrypted directory connection
Apr 23 19:55:59 localhost Tor[1]: Bootstrapped 20%: Asking for networkstatus consensus
Apr 23 19:55:59 localhost Tor[1]: Bootstrapped 25%: Loading networkstatus consensus
Apr 23 19:56:05 localhost Tor[1]: I learned some more directory information, but not enough to build a circuit: We have no usable consensus.
Apr 23 19:56:06 localhost Tor[1]: Bootstrapped 40%: Loading authority key certs
Apr 23 19:56:06 localhost Tor[1]: The current consensus has no exit nodes. Tor can only build internal paths, such as paths to onion services.
Apr 23 19:56:06 localhost Tor[1]: Bootstrapped 45%: Asking for relay descriptors for internal paths
Apr 23 19:56:06 localhost Tor[1]: I learned some more directory information, but not enough to build a circuit: We need more microdescriptors: we have 0/6712, and can only build 0% of likely paths. (We have 0% of guards bw, 0% of midpoint bw, and 100% of end bw (no exits in consensus) = 0% of path bw.)
Apr 23 19:56:07 localhost Tor[1]: Bootstrapped 50%: Loading relay descriptors for internal paths
Apr 23 19:56:08 localhost Tor[1]: The current consensus contains exit nodes. Tor can build exit and internal paths.
Apr 23 19:56:09 localhost Tor[1]: Bootstrapped 56%: Loading relay descriptors
Apr 23 19:56:09 localhost Tor[1]: Bootstrapped 64%: Loading relay descriptors
Apr 23 19:56:09 localhost Tor[1]: Bootstrapped 70%: Loading relay descriptors
Apr 23 19:56:09 localhost Tor[1]: Bootstrapped 80%: Connecting to the Tor network
Apr 23 19:56:10 localhost Tor[1]: Bootstrapped 85%: Finishing handshake with first hop
Apr 23 19:56:10 localhost Tor[1]: Bootstrapped 90%: Establishing a Tor circuit
Apr 23 19:56:11 localhost Tor[1]: Tor has successfully opened a circuit. Looks like client functionality is working.
Apr 23 19:56:11 localhost Tor[1]: Bootstrapped 100%: Done
[...]
Apr 23 20:06:25 localhost Tor[1]: Catching signal TERM, exiting cleanly.
The above repeats on every boot.
Regards,
RG.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-10 4:41 Tor Service Raghav Gururajan
` (2 preceding siblings ...)
2019-05-16 7:58 ` Raghav Gururajan
@ 2019-05-17 15:24 ` Raghav Gururajan
3 siblings, 0 replies; 11+ messages in thread
From: Raghav Gururajan @ 2019-05-17 15:24 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: dannym, help-guix
It appears the tor service starts and bootstraps well, but no idea why it stops after that. :-(
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-16 7:58 ` Raghav Gururajan
@ 2019-05-19 14:24 ` Ludovic Courtès
2019-05-19 14:41 ` Raghav Gururajan
1 sibling, 0 replies; 11+ messages in thread
From: Ludovic Courtès @ 2019-05-19 14:24 UTC (permalink / raw)
To: Raghav Gururajan; +Cc: dannym, help-guix
Hi,
"Raghav Gururajan" <rvgn@disroot.org> skribis:
> Apr 23 15:55:58 localhost shepherd[1]: Service tor has been started.
> [...]
> Apr 23 19:56:11 localhost Tor[1]: Bootstrapped 100%: Done
> [...]
> Apr 23 20:06:25 localhost Tor[1]: Catching signal TERM, exiting cleanly.
The Tor daemon received SIGTERM 10 minutes (or even 5 hours?) after it
had been started, so something must have happened. Is there anything
else in the log that could be useful in that interval?
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-16 7:58 ` Raghav Gururajan
2019-05-19 14:24 ` Ludovic Courtès
@ 2019-05-19 14:41 ` Raghav Gururajan
2019-05-30 17:45 ` Raghav Gururajan
1 sibling, 1 reply; 11+ messages in thread
From: Raghav Gururajan @ 2019-05-19 14:41 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: dannym, help-guix
> The Tor daemon received SIGTERM 10 minutes (or even 5 hours?) after it
> had been started, so something must have happened. Is there anything
> else in the log that could be useful in that interval?
>
Nope! There was nothing related to tor in that interval. :-(
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-19 14:41 ` Raghav Gururajan
@ 2019-05-30 17:45 ` Raghav Gururajan
2019-05-31 19:20 ` Marius Bakke
0 siblings, 1 reply; 11+ messages in thread
From: Raghav Gururajan @ 2019-05-30 17:45 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: dannym, help-guix
> > The Tor daemon received SIGTERM 10 minutes (or even 5 hours?) after it
> > had been started, so something must have happened. Is there anything
> > else in the log that could be useful in that interval?
> >
>
> Nope! There was nothing related to tor in that interval. :-(
I figured out why the Tor Service got TERM Signal out of no where. It is because
of "tlp-service-type". I made a fresh re-install of guix system few days ago. I
was enabling services one-by-one and was checking tor service with herd status.
As soon as I enable "tlp-service-type", tor stopped working. How to prevent
"tlp" from messing with "tor" or any other services???
Thanks!
Regards,
RG.
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-30 17:45 ` Raghav Gururajan
@ 2019-05-31 19:20 ` Marius Bakke
2019-05-31 19:41 ` Raghav Gururajan
0 siblings, 1 reply; 11+ messages in thread
From: Marius Bakke @ 2019-05-31 19:20 UTC (permalink / raw)
To: Raghav Gururajan, Ludovic Courtès; +Cc: dannym, help-guix
[-- Attachment #1: Type: text/plain, Size: 797 bytes --]
Raghav Gururajan <rvgn@disroot.org> writes:
>> > The Tor daemon received SIGTERM 10 minutes (or even 5 hours?) after it
>> > had been started, so something must have happened. Is there anything
>> > else in the log that could be useful in that interval?
>> >
>>
>> Nope! There was nothing related to tor in that interval. :-(
>
> I figured out why the Tor Service got TERM Signal out of no where. It is because
> of "tlp-service-type". I made a fresh re-install of guix system few days ago. I
> was enabling services one-by-one and was checking tor service with herd status.
> As soon as I enable "tlp-service-type", tor stopped working. How to prevent
> "tlp" from messing with "tor" or any other services???
Can you share a system configuration that reproduces this failure?
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 487 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Tor Service
2019-05-31 19:20 ` Marius Bakke
@ 2019-05-31 19:41 ` Raghav Gururajan
0 siblings, 0 replies; 11+ messages in thread
From: Raghav Gururajan @ 2019-05-31 19:41 UTC (permalink / raw)
To: Marius Bakke, Ludovic Courtès; +Cc: dannym, help-guix
> Can you share a system configuration that reproduces this failure?
Sure, please find the following system config:
(use-modules
(gnu)
(gnu system nss))
(use-service-modules
networking
xorg
desktop
pm)
(use-package-modules
certs
gnome)
(operating-system
(host-name "hostname")
(timezone "Zone/SubZone")
(locale "ab_XY.1234")
(keyboard-layout
(keyboard-layout
"xy"
"altgr-intl"))
(bootloader
(bootloader-configuration
(bootloader
(bootloader
(inherit grub-bootloader)
(installer #~(const #t))))
(keyboard-layout keyboard-layout)))
(mapped-devices
(list
(mapped-device
(source
(uuid "luks-uuid"))
(target "partname")
(type luks-device-mapping))))
(file-systems
(append
(list
(file-system
(device
(file-system-label "fsname"))
(mount-point "/")
(type "ext4")
(dependencies mapped-devices)))
%base-file-systems))
(users
(append
(list
(user-account
(name "username")
(comment "Full Name")
(group "users")
(supplementary-groups '("wheel" "netdev" "audio" "video"
"lp" "cdrom" "tape" "kvm" "tor"))))
%base-user-accounts))
(packages
(append
(list
nss-certs
gvfs)
%base-packages))
(services
(append
(list
(extra-special-file "/usr/bin/env"
(file-append coreutils "/bin/env"))
(service tor-service-type)
(set-xorg-configuration
(xorg-configuration
(keyboard-layout keyboard-layout)))
(service gnome-desktop-service-type)
(service tlp-service-type))
%desktop-services))
(name-service-switch %mdns-host-lookup-nss))
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2019-05-31 19:41 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-10 4:41 Tor Service Raghav Gururajan
2019-05-15 21:13 ` Ludovic Courtès
2019-05-16 4:52 ` Raghav Gururajan
2019-05-16 7:58 ` Raghav Gururajan
2019-05-19 14:24 ` Ludovic Courtès
2019-05-19 14:41 ` Raghav Gururajan
2019-05-30 17:45 ` Raghav Gururajan
2019-05-31 19:20 ` Marius Bakke
2019-05-31 19:41 ` Raghav Gururajan
2019-05-17 15:24 ` Raghav Gururajan
-- strict thread matches above, loose matches on Subject: below --
2019-04-24 16:34 Raghav Gururajan
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.