all messages for Guix-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* Installation freeze
@ 2019-07-11 11:48 Leonardo Pérez Pulido
  2019-07-12 21:35 ` Ludovic Courtès
  0 siblings, 1 reply; 3+ messages in thread
From: Leonardo Pérez Pulido @ 2019-07-11 11:48 UTC (permalink / raw)
  To: help-guix@gnu.org

[-- Attachment #1: Type: text/plain, Size: 2222 bytes --]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Hello everyone,

During the installation process, after the installer downloads
sqlite-autoconf-3260000.tar.gz and pass the 'configure' phase, the installation
freezes in the 'build' phase.

The screen looks like:

| building

I've tried it several times with the same result, everytime.

Any hint?


GNU Guix System 1.0.1 installer of the standalone Guix System

Architecture:        i686
CPU op-mode(s):      32-bit
Byte Order:          Little Endian
Address sizes:       32 bits physical, 32 bits virtual
CPU(s):              2
On-line CPU(s) list: 0,1
Thread(s) per core:  2
Core(s) per socket:  1
Socket(s):           1
Vendor ID:           GenuineIntel
CPU family:          6
Model:               28
Model name:          Intel(R) Atom(TM) CPU N270   @ 1.60GHz
Stepping:            2
CPU MHz:             859.642
CPU max MHz:         1600.0000
CPU min MHz:         800.0000
BogoMIPS:            3192.21
L1d cache:           24K
L1i cache:           32K
L2 cache:            512K
Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc
arch_perfmon pebs bts cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2
ssse3 xtpr pdcm movbe lahf_lm dtherm


Thanks,

Leonardo.



-----BEGIN PGP SIGNATURE-----

iQIzBAEBCgAdFiEEiZN2wyv7w7o0MLbbN64Q+LyAewQFAl0nIRIACgkQN64Q+LyA
ewQd4g//b2QAWNRLOZknjP/am6ulHPYWi7BfaUG3+bz4tS53i9oVD021xPHzhA1q
KHCaYVvVD0PbV4Djm1HHFrcDXux8bfarKp3xiOFH7LDE7KPsswuvy7mWlhp0WvM2
aorLDn3IpzxPHHJP0bibg/d/mRsGJGISFwFuZc+qNVI6TnYdo/KFkcMWFnhIpGNi
e8eTZykbbdeKD+LN+0hynn2nUDsIUVHcxxhoqyG0tORvWnc06lA4HCWV85ZVrsd/
tBg/x2E0K9o5KqBd4hVIsHtaKlv4UvG6NB2ywrG4M0minRzXwurf/pkmWlyzR2IG
EAgLC39qtW7xv43zjd+v0k+cYEBX3CAZbGs6vC+wg2foL+FhKOCaqSTKxg0GB7zo
8Xoxk5fvvTIPMpQoqkUXJ8GDZ4Qi5kdsJMJ2dXgjQFz2nFe6xmjmUE33wKKqHsDf
dyQatWpQr7I6C3+4NZGGwaRi16ASq3tZyxhsMhlEvkGHp+n+FvXgnpoQCaypKPaK
LJ7m2tdsFaHPceEj5gga2rhpQ1QjS2bOUIdFTu+SnoSEgKx938Pxk4Zbdf35vlMR
NngovPBqLJ428vnKZ7gc4EjFvWtHw1KnbG59zpuUnvdQD+DjNuNFDjl66+ceYkFB
0og11n9u2i05VVbZJLyMjPFZxJFd7U2Pm7PZ4QYaq+nlnodOzm8=
=uOqx
-----END PGP SIGNATURE-----


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-keys, Size: 3183 bytes --]

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Installation freeze
  2019-07-11 11:48 Installation freeze Leonardo Pérez Pulido
@ 2019-07-12 21:35 ` Ludovic Courtès
  2019-07-13 11:38   ` Leonardo Pérez Pulido
  0 siblings, 1 reply; 3+ messages in thread
From: Ludovic Courtès @ 2019-07-12 21:35 UTC (permalink / raw)
  To: Leonardo Pérez Pulido; +Cc: help-guix@gnu.org

Hello,

Leonardo Pérez Pulido <leoperezpulido@protonmail.com> skribis:

> During the installation process, after the installer downloads
> sqlite-autoconf-3260000.tar.gz and pass the 'configure' phase, the installation
> freezes in the 'build' phase.

Could you clarify which installation procedure you followed for Guix
(Guix on a foreign distro? Using the binary install or building from
source or…?)?

Also, did you enable substitutes?  See
<https://www.gnu.org/software/guix/manual/en/html_node/Substitutes.html>.

Thanks,
Ludo’.

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Installation freeze
  2019-07-12 21:35 ` Ludovic Courtès
@ 2019-07-13 11:38   ` Leonardo Pérez Pulido
  0 siblings, 0 replies; 3+ messages in thread
From: Leonardo Pérez Pulido @ 2019-07-13 11:38 UTC (permalink / raw)
  To: Ludovic Courtès, help-guix@gnu.org

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Hi,

> Could you clarify which installation procedure you followed for Guix (Guix
> on a foreign distro? Using the binary install or building from source or…?)?

Yes, I'm using the binary install standalone Guix System on an i686 machine.
I thought it can be installed on its own.

I _DON'T_ want Guix installed on a foreign distribution, all I want is a
completely free OS, including the Linux-libre kernel.

> Also, did you enable substitutes?

As read from the official docs:

4.3.1 Official Substitute Server

'Substitutes from the official build farm are enabled by default when using
Guix System.'


Do you have any plans to end the 32-bit x86 support in Guix System?


Thanks,

Leo.



-----BEGIN PGP SIGNATURE-----
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=A/UQ
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-07-13 11:38 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-11 11:48 Installation freeze Leonardo Pérez Pulido
2019-07-12 21:35 ` Ludovic Courtès
2019-07-13 11:38   ` Leonardo Pérez Pulido

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/guix.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.