* No ethernet service during install
@ 2021-08-01 14:31 Robby Zambito
2021-08-01 16:27 ` pelzflorian (Florian Pelz)
0 siblings, 1 reply; 6+ messages in thread
From: Robby Zambito @ 2021-08-01 14:31 UTC (permalink / raw)
To: help-guix
Hello,
I am trying to install GNU Guix on my Dell R710 server, but during the
installation I am running into this error:
> No ethernet service available, please try again.
I've tried rebooting, using both the stable and latest releases, and
using different ethernet ports on the machine. Each time I end up with
the same error.
I've tracked down the error to this file
https://git.savannah.gnu.org/cgit/guix.git/tree/gnu/installer/newt/ethernet.scm
(at least I don't see that error anywhere else but that file), but I am
unsure how I can try to debug the issue.
Any suggestions for resolving this would be appreciated!
Thanks,
Robby
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: No ethernet service during install 2021-08-01 14:31 No ethernet service during install Robby Zambito @ 2021-08-01 16:27 ` pelzflorian (Florian Pelz) 2021-08-01 19:27 ` Robby Zambito 0 siblings, 1 reply; 6+ messages in thread From: pelzflorian (Florian Pelz) @ 2021-08-01 16:27 UTC (permalink / raw) To: Robby Zambito; +Cc: help-guix Hello Robby, On Sun, Aug 01, 2021 at 10:31:37AM -0400, Robby Zambito wrote: > I am trying to install GNU Guix on my Dell R710 server, but during the > installation I am running into this error: > > > No ethernet service available, please try again. Maybe (possibly) your ethernet card is not supported by Linux-libre. > I've tried rebooting, using both the stable and latest releases, and > using different ethernet ports on the machine. Do you have a USB ethernet adapter with which you can try? Regards, Florian ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: No ethernet service during install 2021-08-01 16:27 ` pelzflorian (Florian Pelz) @ 2021-08-01 19:27 ` Robby Zambito [not found] ` <947ccfaa-c844-41fa-a138-173c7ae1a928@www.fastmail.com> 0 siblings, 1 reply; 6+ messages in thread From: Robby Zambito @ 2021-08-01 19:27 UTC (permalink / raw) To: pelzflorian (Florian Pelz); +Cc: help-guix Hello Florian, Thanks for the reply. > Maybe (possibly) your ethernet card is not supported by Linux-libre. It seems like this is the case unfortunately :( I tried doing the installation from the shell, rather than using the graphical installation. Running `ip link set <my interface> up` gave me an error that it is missing Free firmware. > Do you have a USB ethernet adapter with which you can try? No, unfortunately. It seems like I will need to get creative. Perhaps I can do some IP over USB or something like that. Thanks, Robby ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <947ccfaa-c844-41fa-a138-173c7ae1a928@www.fastmail.com>]
* Re: No ethernet service during install [not found] ` <947ccfaa-c844-41fa-a138-173c7ae1a928@www.fastmail.com> @ 2021-08-02 1:06 ` Robby Zambito 2021-08-02 15:15 ` Leo Famulari 0 siblings, 1 reply; 6+ messages in thread From: Robby Zambito @ 2021-08-02 1:06 UTC (permalink / raw) To: Leo Famulari; +Cc: help-guix On Sun, Aug 01, 2021 at 05:03:13PM -0400, Leo Famulari wrote: > That's unfortunate. Can you tell us what card it is? Ethernet (at least gigabit and slower) is usually supported by linux-libre, so I'm curious to know which card is missing support. lspci says that it's a Broadcom NetXtreme II BCM5709 Gigabit Ethernet card. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: No ethernet service during install 2021-08-02 1:06 ` Robby Zambito @ 2021-08-02 15:15 ` Leo Famulari 2021-08-02 21:38 ` Philip McGrath 0 siblings, 1 reply; 6+ messages in thread From: Leo Famulari @ 2021-08-02 15:15 UTC (permalink / raw) To: Robby Zambito; +Cc: help-guix On Sun, Aug 01, 2021 at 09:06:31PM -0400, Robby Zambito wrote: > On Sun, Aug 01, 2021 at 05:03:13PM -0400, Leo Famulari wrote: > > That's unfortunate. Can you tell us what card it is? Ethernet (at least gigabit and slower) is usually supported by linux-libre, so I'm curious to know which card is missing support. > > lspci says that it's a Broadcom NetXtreme II BCM5709 Gigabit Ethernet > card. Thanks for the details. Googling, I found some discussions about this card, including this: https://old.reddit.com/r/linuxquestions/comments/4wh3gu/is_the_broadcom_bcm5709_chipset_no_longer/ I believe this is the Linux configuration option / driver: https://cateee.net/lkddb/web-lkddb/BNX2.html However, since it appears that this driver is not free software, linux-libre will have disabled it and it won't be supported within GNU Guix. ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: No ethernet service during install 2021-08-02 15:15 ` Leo Famulari @ 2021-08-02 21:38 ` Philip McGrath 0 siblings, 0 replies; 6+ messages in thread From: Philip McGrath @ 2021-08-02 21:38 UTC (permalink / raw) To: help-guix On 8/2/21 11:15 AM, Leo Famulari wrote:> I believe this is the Linux configuration option / driver: > > https://cateee.net/lkddb/web-lkddb/BNX2.html > > However, since it appears that this driver is not free software, > linux-libre will have disabled it and it won't be supported within GNU > Guix. To be unambiguous, GNU Guix as a project, on principle,[1][2] does not support or recommend non-free software. By those same principles, since `guix` itself is free software, you have "the freedom to run the program as [you] wish, for any purpose."[1] In that sense, Guix "supports" any software you instruct it to install: it does not attempt any technical measures to second-guess your decision. Perhaps that should be obvious, but of course there are some systems which do restrict their users from installing and running software that the system's developers have not approved. My understanding is that some people do use Guix to install non-free software: I'm not one of them, but I'm confident you'll find them if you go looking for them. You won't find them here, though, out of respect for the Guix project's principled decision never to recommend installing non-free software. I'm sure the outcome we'd all prefer would be to have a free driver for your ethernet card! Unfortunately I don't know anything about that. -Philip [1]: https://gnu.tools/en/documents/social-contract/ [2]: https://www.gnu.org/distros/free-system-distribution-guidelines.html ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-08-02 22:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-01 14:31 No ethernet service during install Robby Zambito
2021-08-01 16:27 ` pelzflorian (Florian Pelz)
2021-08-01 19:27 ` Robby Zambito
[not found] ` <947ccfaa-c844-41fa-a138-173c7ae1a928@www.fastmail.com>
2021-08-02 1:06 ` Robby Zambito
2021-08-02 15:15 ` Leo Famulari
2021-08-02 21:38 ` Philip McGrath
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).