* bug#27605: Lightweight desktop example fails to build with kernel panic
@ 2017-07-07 3:49 Leo Famulari
2017-07-07 12:23 ` Ludovic Courtès
0 siblings, 1 reply; 8+ messages in thread
From: Leo Famulari @ 2017-07-07 3:49 UTC (permalink / raw)
To: 27605
[-- Attachment #1: Type: text/plain, Size: 2000 bytes --]
[...]
registering closures...
populating...
creating FAT partition...
mkfs.fat 4.1 (2017-01-24)
mounting root partition...
[ 688.377705] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
installing bootloader...
/gnu/store/0g5bgkc757xmafxs2prjj896qpzj9wan-grub-efi-2.02/sbin/grub-install: error: /gnu/store/0g5bgkc757xmafxs2prjj896qpzj9wan-grub-efi-2.02/lib/grub/i386-pc/modinfo.sh doesn't exist. Please specify --target or --directory.
ERROR: In procedure scm-error:
ERROR: failed to install GRUB
Entering a new prompt. Type `,bt' for a backtrace or `,q' to continue.
[ 688.458461] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
[ 688.458461]
[ 688.459789] CPU: 0 PID: 1 Comm: init Not tainted 4.12.0-gnu #1
[ 688.460629] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014
[ 688.462310] Call Trace:
[ 688.462857] dump_stack+0x63/0x82
[ 688.463785] panic+0xe4/0x22d
[ 688.464611] do_exit+0xae2/0xaf0
[ 688.465509] ? wake_up_state+0x10/0x20
[ 688.466330] do_group_exit+0x43/0xb0
[ 688.467147] SyS_exit_group+0x14/0x20
[ 688.467999] entry_SYSCALL_64_fastpath+0x1e/0xa9
[ 688.469144] RIP: 0033:0x5e6b98
[ 688.469902] RSP: 002b:00007ffe66065998 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
[ 688.471236] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000005e6b98
[ 688.472252] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000
[ 688.473413] RBP: 0000000000a51938 R08: 00000000000000e7 R09: ffffffffffffffc8
[ 688.475139] R10: 0000000000000ec0 R11: 0000000000000246 R12: 0000000000000001
[ 688.476422] R13: 0000000000a7f020 R14: 000000000352b700 R15: 0000000000000001
[ 688.477540] Kernel Offset: 0x37000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 688.479119] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000
[ 688.479119]
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#27605: Lightweight desktop example fails to build with kernel panic
2017-07-07 3:49 bug#27605: Lightweight desktop example fails to build with kernel panic Leo Famulari
@ 2017-07-07 12:23 ` Ludovic Courtès
2017-07-07 12:53 ` Leo Famulari
0 siblings, 1 reply; 8+ messages in thread
From: Ludovic Courtès @ 2017-07-07 12:23 UTC (permalink / raw)
To: Leo Famulari; +Cc: 27605
Hi Leo,
Leo Famulari <leo@famulari.name> skribis:
> [...]
> registering closures...
> populating...
> creating FAT partition...
> mkfs.fat 4.1 (2017-01-24)
> mounting root partition...
> [ 688.377705] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts: (null)
> installing bootloader...
> /gnu/store/0g5bgkc757xmafxs2prjj896qpzj9wan-grub-efi-2.02/sbin/grub-install: error: /gnu/store/0g5bgkc757xmafxs2prjj896qpzj9wan-grub-efi-2.02/lib/grub/i386-pc/modinfo.sh doesn't exist. Please specify --target or --directory.
> ERROR: In procedure scm-error:
> ERROR: failed to install GRUB
Did you pass --image-size? If not, it could be that the image size
estimate is slightly too small (see commit
a8ac4f081a9a679498ea42ccfe001f218bba3043).
The build log should contain something like:
creating ~a image of ~,2f MiB...
where ~a is “raw” or “qcow2” depending on the “guix system” command you
used.
Could you check what happens if you pass a --image-size argument bigger
than that?
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#27605: Lightweight desktop example fails to build with kernel panic
2017-07-07 12:23 ` Ludovic Courtès
@ 2017-07-07 12:53 ` Leo Famulari
2017-07-07 13:21 ` Leo Famulari
2017-07-07 13:39 ` Ludovic Courtès
0 siblings, 2 replies; 8+ messages in thread
From: Leo Famulari @ 2017-07-07 12:53 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 27605
[-- Attachment #1: Type: text/plain, Size: 1632 bytes --]
On Fri, Jul 07, 2017 at 02:23:05PM +0200, Ludovic Courtès wrote:
> Did you pass --image-size? If not, it could be that the image size
> estimate is slightly too small (see commit
> a8ac4f081a9a679498ea42ccfe001f218bba3043).
>
> The build log should contain something like:
>
> creating ~a image of ~,2f MiB...
>
> where ~a is “raw” or “qcow2” depending on the “guix system” command you
> used.
>
> Could you check what happens if you pass a --image-size argument bigger
> than that?
I doubled it from ~10 GiB to ~20 GiB:
> creating qcow2 image of 19359.59 MiB...
This example template uses EFI, which I'm not that familiar with. But I
suspect something about the bootloader or filesystems configuration is
wrong.
From 'gnu/system/examples/lightweight-desktop.tmpl':
;; Use the UEFI variant of GRUB with the EFI System
;; Partition on /dev/sda1.
(bootloader (grub-configuration (grub grub-efi)
(device "/dev/sda1")))
;; Assume the target root file system is labelled "my-root".
(file-systems (cons* (file-system
(device "my-root")
(title 'label)
(mount-point "/")
(type "ext4"))
(file-system
;; Specify partition here since FAT
;; labels are currently unsupported.
(device "/dev/sda1")
(mount-point "/boot/efi")
(type "vfat"))
%base-file-systems))
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#27605: Lightweight desktop example fails to build with kernel panic
2017-07-07 12:53 ` Leo Famulari
@ 2017-07-07 13:21 ` Leo Famulari
2017-07-07 15:16 ` Ludovic Courtès
2017-07-07 13:39 ` Ludovic Courtès
1 sibling, 1 reply; 8+ messages in thread
From: Leo Famulari @ 2017-07-07 13:21 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 27605-done
[-- Attachment #1: Type: text/plain, Size: 1004 bytes --]
On Fri, Jul 07, 2017 at 08:53:37AM -0400, Leo Famulari wrote:
> On Fri, Jul 07, 2017 at 02:23:05PM +0200, Ludovic Courtès wrote:
> > Did you pass --image-size? If not, it could be that the image size
> > estimate is slightly too small (see commit
> > a8ac4f081a9a679498ea42ccfe001f218bba3043).
> >
> > The build log should contain something like:
> >
> > creating ~a image of ~,2f MiB...
> >
> > where ~a is “raw” or “qcow2” depending on the “guix system” command you
> > used.
> >
> > Could you check what happens if you pass a --image-size argument bigger
> > than that?
>
> I doubled it from ~10 GiB to ~20 GiB:
>
> > creating qcow2 image of 19359.59 MiB...
>
> This example template uses EFI, which I'm not that familiar with. But I
> suspect something about the bootloader or filesystems configuration is
> wrong.
Actually, false alarm! After increasing the image size to 20 GiB, I
missed the messages about being out of space. Sorry for the noise!
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#27605: Lightweight desktop example fails to build with kernel panic
2017-07-07 13:21 ` Leo Famulari
@ 2017-07-07 15:16 ` Ludovic Courtès
2017-07-07 16:32 ` Leo Famulari
0 siblings, 1 reply; 8+ messages in thread
From: Ludovic Courtès @ 2017-07-07 15:16 UTC (permalink / raw)
To: Leo Famulari; +Cc: 27605-done
Leo Famulari <leo@famulari.name> skribis:
> On Fri, Jul 07, 2017 at 08:53:37AM -0400, Leo Famulari wrote:
>> On Fri, Jul 07, 2017 at 02:23:05PM +0200, Ludovic Courtès wrote:
>> > Did you pass --image-size? If not, it could be that the image size
>> > estimate is slightly too small (see commit
>> > a8ac4f081a9a679498ea42ccfe001f218bba3043).
>> >
>> > The build log should contain something like:
>> >
>> > creating ~a image of ~,2f MiB...
>> >
>> > where ~a is “raw” or “qcow2” depending on the “guix system” command you
>> > used.
>> >
>> > Could you check what happens if you pass a --image-size argument bigger
>> > than that?
>>
>> I doubled it from ~10 GiB to ~20 GiB:
>>
>> > creating qcow2 image of 19359.59 MiB...
>>
>> This example template uses EFI, which I'm not that familiar with. But I
>> suspect something about the bootloader or filesystems configuration is
>> wrong.
>
> Actually, false alarm! After increasing the image size to 20 GiB, I
> missed the messages about being out of space. Sorry for the noise!
So the problem is that the estimate was too small, right?
It would be awesome if you could fiddle with the heuristics in there to
see what would work. :-)
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#27605: Lightweight desktop example fails to build with kernel panic
2017-07-07 15:16 ` Ludovic Courtès
@ 2017-07-07 16:32 ` Leo Famulari
2017-07-07 17:51 ` Ludovic Courtès
0 siblings, 1 reply; 8+ messages in thread
From: Leo Famulari @ 2017-07-07 16:32 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 27605-done
On Fri, Jul 07, 2017 at 05:16:54PM +0200, Ludovic Courtès wrote:
> > Actually, false alarm! After increasing the image size to 20 GiB, I
> > missed the messages about being out of space. Sorry for the noise!
>
> So the problem is that the estimate was too small, right?
No, the problem was that I forgot about the estimator and tried to use
10 GiB, which was too small :)
> It would be awesome if you could fiddle with the heuristics in there to
> see what would work. :-)
I just tried the estimator and it worked fine.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#27605: Lightweight desktop example fails to build with kernel panic
2017-07-07 16:32 ` Leo Famulari
@ 2017-07-07 17:51 ` Ludovic Courtès
0 siblings, 0 replies; 8+ messages in thread
From: Ludovic Courtès @ 2017-07-07 17:51 UTC (permalink / raw)
To: Leo Famulari; +Cc: 27605-done
Leo Famulari <leo@famulari.name> skribis:
> On Fri, Jul 07, 2017 at 05:16:54PM +0200, Ludovic Courtès wrote:
>> > Actually, false alarm! After increasing the image size to 20 GiB, I
>> > missed the messages about being out of space. Sorry for the noise!
>>
>> So the problem is that the estimate was too small, right?
>
> No, the problem was that I forgot about the estimator and tried to use
> 10 GiB, which was too small :)
>
>> It would be awesome if you could fiddle with the heuristics in there to
>> see what would work. :-)
>
> I just tried the estimator and it worked fine.
Perfect. :-)
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#27605: Lightweight desktop example fails to build with kernel panic
2017-07-07 12:53 ` Leo Famulari
2017-07-07 13:21 ` Leo Famulari
@ 2017-07-07 13:39 ` Ludovic Courtès
1 sibling, 0 replies; 8+ messages in thread
From: Ludovic Courtès @ 2017-07-07 13:39 UTC (permalink / raw)
To: Leo Famulari; +Cc: 27605
Leo Famulari <leo@famulari.name> skribis:
> On Fri, Jul 07, 2017 at 02:23:05PM +0200, Ludovic Courtès wrote:
>> Did you pass --image-size? If not, it could be that the image size
>> estimate is slightly too small (see commit
>> a8ac4f081a9a679498ea42ccfe001f218bba3043).
>>
>> The build log should contain something like:
>>
>> creating ~a image of ~,2f MiB...
>>
>> where ~a is “raw” or “qcow2” depending on the “guix system” command you
>> used.
>>
>> Could you check what happens if you pass a --image-size argument bigger
>> than that?
>
> I doubled it from ~10 GiB to ~20 GiB:
>
>> creating qcow2 image of 19359.59 MiB...
>
> This example template uses EFI, which I'm not that familiar with. But I
> suspect something about the bootloader or filesystems configuration is
> wrong.
>
> From 'gnu/system/examples/lightweight-desktop.tmpl':
>
> ;; Use the UEFI variant of GRUB with the EFI System
> ;; Partition on /dev/sda1.
> (bootloader (grub-configuration (grub grub-efi)
> (device "/dev/sda1")))
Oh right, so the failure is probably unrelated to the image-size
estimate.
Marius, any ideas? :-)
https://bugs.gnu.org/27605
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2017-07-07 17:52 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-07-07 3:49 bug#27605: Lightweight desktop example fails to build with kernel panic Leo Famulari
2017-07-07 12:23 ` Ludovic Courtès
2017-07-07 12:53 ` Leo Famulari
2017-07-07 13:21 ` Leo Famulari
2017-07-07 15:16 ` Ludovic Courtès
2017-07-07 16:32 ` Leo Famulari
2017-07-07 17:51 ` Ludovic Courtès
2017-07-07 13:39 ` Ludovic Courtès
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).