* bug#48376: Failure in "guix pull"
@ 2021-05-12 10:15 Konrad Hinsen
2021-05-12 11:54 ` Konrad Hinsen
0 siblings, 1 reply; 6+ messages in thread
From: Konrad Hinsen @ 2021-05-12 10:15 UTC (permalink / raw)
To: 48376
Today's "guix pull" resulted in an error message that ends with a
request for a bug report. So here it comes:
===========================================================================
Updating channel 'guix-past' from Git repository at 'https://gitlab.inria.fr/guix-hpc/guix-past'...
Updating channel 'guix' from Git repository at 'https://git.savannah.gnu.org/git/guix.git'...
guix pull: warning: moving channel 'guix' from 3e4f6d2bbc6f0f81c1487eb1bb69d8e9fe9bdbd7 to unrelated commit 34985fb6ae7deffd40443766f5408649a0cbbff2
Authenticating channel 'guix', commits 9edb3f6 to 34985fb (777 new commits)...
Building from these channels:
guix https://git.savannah.gnu.org/git/guix.git 34985fb
guix-past https://gitlab.inria.fr/guix-hpc/guix-past 0f892e4
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
substitute: updating substitutes from 'https://ci.guix.gnu.org'... 100.0%
module-import 2KiB 25KiB/s 00:00 [##################] 100.0%
module-import-compiled 1.4MiB 1.7MiB/s 00:01 [##################] 100.0%
compute-guix-derivation 1005B 9KiB/s 00:00 [##################] 100.0%
Computing Guix derivation for 'x86_64-linux'... |Backtrace:
13 (primitive-load "/gnu/store/jbz265j88niryci4f80zfwq92vjy2xam-compute-guix-derivation")
In ice-9/eval.scm:
155:9 12 (_ _)
159:9 11 (_ #(#(#(#(#(#(#(#(#(#(#(#(#(#(#(#(#<directory (guile-u?> ?) ?) ?) ?) ?) ?) ?) ?) ?) ?) ?) ?) ?) ?) ?) ?))
In ice-9/boot-9.scm:
152:2 10 (with-fluid* _ _ _)
152:2 9 (with-fluid* _ _ _)
In ./guix/store.scm:
2076:24 8 (run-with-store #<store-connection 256.99 7f46cd7e73c0> _ #:guile-for-build _ #:system _ #:target _)
1910:8 7 (_ _)
In ./guix/gexp.scm:
256:18 6 (_ _)
1137:2 5 (_ _)
1003:2 4 (_ _)
849:4 3 (_ _)
In ./guix/store.scm:
1958:12 2 (_ #<store-connection 256.99 7f46cd7e73c0>)
1372:5 1 (map/accumulate-builds #<store-connection 256.99 7f46cd7e73c0> _ _)
1383:15 0 (_ #<store-connection 256.99 7f46cd7e73c0> _ _)
./guix/store.scm:1383:15: ERROR:
1. &store-protocol-error:
message: "some substitutes for the outputs of derivation `/gnu/store/8kj83zhzcfpp7df9jxsyarnkrbvglwri-guile-json-3.5.0.drv' failed (usually happens due to networking issues); try `--fallback' to build derivation from source "
status: 1
guix pull: error: You found a bug: the program '/gnu/store/jbz265j88niryci4f80zfwq92vjy2xam-compute-guix-derivation'
failed to compute the derivation for Guix (version: "34985fb6ae7deffd40443766f5408649a0cbbff2"; system: "x86_64-linux";
host version: "3e4f6d2bbc6f0f81c1487eb1bb69d8e9fe9bdbd7"; pull-version: 1).
Please report it by email to <bug-guix@gnu.org>.
===========================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread* bug#48376: Failure in "guix pull"
2021-05-12 10:15 bug#48376: Failure in "guix pull" Konrad Hinsen
@ 2021-05-12 11:54 ` Konrad Hinsen
2021-05-15 2:10 ` Maxim Cournoyer
0 siblings, 1 reply; 6+ messages in thread
From: Konrad Hinsen @ 2021-05-12 11:54 UTC (permalink / raw)
To: 48376
Trying the "guix pull" a short while (and one commit to Guix) later, the
error is gone. Which is a bit strange: whatever the cause of the error
was, it's hard to believe that adding the package
"python-sqlalchemy-stubs" (which is what commit
f8a4724c101880892640dcc2fe3438dc2a26b624 did) could fix it.
Konrad.
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#48376: Failure in "guix pull"
2021-05-12 11:54 ` Konrad Hinsen
@ 2021-05-15 2:10 ` Maxim Cournoyer
2021-05-16 8:30 ` Konrad Hinsen
0 siblings, 1 reply; 6+ messages in thread
From: Maxim Cournoyer @ 2021-05-15 2:10 UTC (permalink / raw)
To: Konrad Hinsen; +Cc: 48376
Hi Konrad!
Konrad Hinsen <konrad.hinsen@fastmail.net> writes:
> Trying the "guix pull" a short while (and one commit to Guix) later, the
> error is gone. Which is a bit strange: whatever the cause of the error
> was, it's hard to believe that adding the package
> "python-sqlalchemy-stubs" (which is what commit
> f8a4724c101880892640dcc2fe3438dc2a26b624 did) could fix it.
>
> Konrad.
Indeed. I note that the error message that leads to a request to the
bug report mention it could be due to a network failure, which could
explain the transient nature of the problem we see here.
Had you tried multiple times in a row with the same failure on that
commit?
Thank you,
Maxim
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#48376: Failure in "guix pull"
2021-05-15 2:10 ` Maxim Cournoyer
@ 2021-05-16 8:30 ` Konrad Hinsen
2021-05-17 20:37 ` Maxim Cournoyer
0 siblings, 1 reply; 6+ messages in thread
From: Konrad Hinsen @ 2021-05-16 8:30 UTC (permalink / raw)
To: Maxim Cournoyer; +Cc: 48376
Hi Maxim,
Thanks for your reply!
> Indeed. I note that the error message that leads to a request to the
> bug report mention it could be due to a network failure, which could
> explain the transient nature of the problem we see here.
>
> Had you tried multiple times in a row with the same failure on that
> commit?
Yes, I tried again later on two different machines, without any problem.
The reason I submitted a bug report is because Guix told me so. I
assumed that even if the root cause was a network issue, something had
then happened that shouldn't happen. If that's not the case, then the
error message should be improved. A minimal improvement would be to say
"Please report unless you see a comment about networking issues above.".
Cheers,
Konrad.
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#48376: Failure in "guix pull"
2021-05-16 8:30 ` Konrad Hinsen
@ 2021-05-17 20:37 ` Maxim Cournoyer
2021-05-24 16:07 ` Konrad Hinsen
0 siblings, 1 reply; 6+ messages in thread
From: Maxim Cournoyer @ 2021-05-17 20:37 UTC (permalink / raw)
To: Konrad Hinsen; +Cc: 48376
Hi Konrad,
Konrad Hinsen <konrad.hinsen@fastmail.net> writes:
> Hi Maxim,
>
> Thanks for your reply!
>
>> Indeed. I note that the error message that leads to a request to the
>> bug report mention it could be due to a network failure, which could
>> explain the transient nature of the problem we see here.
>>
>> Had you tried multiple times in a row with the same failure on that
>> commit?
>
> Yes, I tried again later on two different machines, without any problem.
>
> The reason I submitted a bug report is because Guix told me so. I
> assumed that even if the root cause was a network issue, something had
> then happened that shouldn't happen. If that's not the case, then the
> error message should be improved. A minimal improvement would be to say
> "Please report unless you see a comment about networking issues above.".
I agree! We don't want people to send bug reports every time their
network is flaky, if this is indeed what has happened. Would you be
interested at surveying if that's the case in the current code? Perhaps
the right change would then become apparent.
Thank you,
Maxim
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#48376: Failure in "guix pull"
2021-05-17 20:37 ` Maxim Cournoyer
@ 2021-05-24 16:07 ` Konrad Hinsen
0 siblings, 0 replies; 6+ messages in thread
From: Konrad Hinsen @ 2021-05-24 16:07 UTC (permalink / raw)
To: Maxim Cournoyer; +Cc: 48376
Hi Maxim,
> I agree! We don't want people to send bug reports every time their
> network is flaky, if this is indeed what has happened. Would you be
> interested at surveying if that's the case in the current code? Perhaps
> the right change would then become apparent.
Interested, maybe, but I am already overcommitted until the end of June.
If nobody else works on this before, I can have a look in summer.
Cheers,
Konrad
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-05-24 16:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-05-12 10:15 bug#48376: Failure in "guix pull" Konrad Hinsen
2021-05-12 11:54 ` Konrad Hinsen
2021-05-15 2:10 ` Maxim Cournoyer
2021-05-16 8:30 ` Konrad Hinsen
2021-05-17 20:37 ` Maxim Cournoyer
2021-05-24 16:07 ` Konrad Hinsen
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).