* bug#117: bug 117: messed up frame parameters
@ 2008-07-08 15:02 Drew Adams
2008-07-08 20:54 ` Jason Rumney
0 siblings, 1 reply; 16+ messages in thread
From: Drew Adams @ 2008-07-08 15:02 UTC (permalink / raw)
To: 117
This has still not changed, in a Windows build from 2008/06/29.
This bug is listed as "normal, unclassified". IMO, this is at least as important
as bugs #47 and #120, which are listed as "important".
This concerns not only the default face but many frame properties. It concerns a
general problem that introduces duplicate frame parameter entries with different
(incorrect) values that shadow the correct values.
In GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
of 2008-06-29 on LENNART-69DE564
Windowing system distributor `Microsoft Corp.', version 5.1.2600
configured using `configure --with-gcc (3.4) --no-opt --cflags -Ic:/g/include
-fno-crossjumping'
------------8<-----------------------------
From: Drew Adams Sent: Friday, May 30, 2008 3:55 PM
To: emacs-pretest-bug@gnu.org
Subject: RE: 23.0.60; messed up frame parameters
This has not changed. I get the same behavior in a Windows build from yesterday:
GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
of 2008-05-29 on LENNART-69DE564
The frame parameters are wrong; there are duplicates, etc., both for the first
frame and for the special *Help* and *Completions* frames. See the detailed
descriptions and the screenshot sent previously.
This has apparently not improved at all.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-07-08 15:02 bug#117: bug 117: messed up frame parameters Drew Adams
@ 2008-07-08 20:54 ` Jason Rumney
2008-07-09 15:27 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Jason Rumney @ 2008-07-08 20:54 UTC (permalink / raw)
To: Drew Adams, 117
Drew Adams wrote:
> This bug is listed as "normal, unclassified". IMO, this is at least as important
> as bugs #47 and #120, which are listed as "important".
Apparently it is not important enough for the original reporter to
produce a concise recipe for reproducing the bug.
Without that, it is unlikely to get any attention from developers,
whatever priority it is assigned in the bug tracker.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-07-08 20:54 ` Jason Rumney
@ 2008-07-09 15:27 ` Drew Adams
2008-08-02 20:36 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Drew Adams @ 2008-07-09 15:27 UTC (permalink / raw)
To: 117
[-- Attachment #1: Type: text/plain, Size: 191 bytes --]
You can use the attached code to repro the problem.
See initial bug report for symptom details.
emacs -Q --debug-init -l ".../path/to/hexrgb.el" -l ".../path/to/oneonone.el" -f
"1on1-emacs"
[-- Attachment #2: oneonone.el --]
[-- Type: application/octet-stream, Size: 71097 bytes --]
;;; oneonone.el --- Frame configuration that uses one frame per window.
;;
;; Filename: oneonone.el
;; Description: Frame configuration that uses one frame per window.
;; Author: Drew Adams
;; Maintainer: Drew Adams
;; Copyright (C) 1999-2008, Drew Adams, all rights reserved.
;; Created: Fri Apr 2 12:34:20 1999
;; Version: 21.1
;; Last-Updated: Tue Feb 12 07:08:17 2008 (Pacific Standard Time)
;; By: dradams
;; Update #: 2344
;; URL: http://www.emacswiki.org/cgi-bin/wiki/oneonone.el
;; Keywords: local, frames
;; Compatibility: GNU Emacs 20.x, GNU Emacs 21.x, GNU Emacs 22.x
;;
;; Features that might be required by this library:
;;
;; `avoid', `cl', `files+', `frame-cmds', `frame-fns', `hexrgb',
;; `misc-fns', `oneonone', `strings', `thingatpt', `thingatpt+',
;; `zoom-frm'.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Commentary:
;;
;; Frame configuration that uses one frame per window.
;;
;; This library is part of One-on-One Emacs, a collection of
;; libraries that try to make Emacs more frame-oriented and less
;; window-oriented.
;;
;; This library sets up Emacs to use multiple frames: individual
;; frames are used, by default, instead of Emacs windows. That is,
;; the default is to use a frame for each Emacs window: one window on
;; one frame.
;;
;; You can configure each of the frames defined here.
;;
;; Default properties are defined here for normal frames and
;; "special" frames, which show "special-display buffers" (see Emacs
;; manual for info on such frames).
;;
;; In addition, these user options control the creation of three
;; separate, specialized frames:
;;
;; - `1on1-*Help*-frame-flag' - *Help* buffer frame
;; - `1on1-*Completions*-frame-flag' - *Completions* buffer frame
;; - `1on1-minibuffer-frame-flag' - minibuffer frame
;;
;; Buffers *Help* and *Completions* are always displayed in their own
;; frames. In addition, if `1on1-*Help*-frame-flag' or
;; `1on1-*Completions*-frame-flag' is non-nil, then the *Help* or
;; *Completions* frame has a special (customizable) appearance.
;;
;; If `1on1-minibuffer-frame-flag' is non-nil (the default value),
;; then the minibuffer is shown in its own frame,
;; `1on1-minibuffer-frame'; this is the only frame to have a
;; minibuffer. If you customize `1on1-minibuffer-frame-flag' to nil,
;; then each frame will have its own minibuffer, as usual, and there
;; will be no standalone minibuffer frame.
;;
;; By default, if you use a standalone minibuffer frame, it is
;; automatically sized to the full width of your display and placed
;; at the bottom of the display. During minibuffer input, you can
;; use `1on1-fit-minibuffer-frame' (bind to `C-o') to resize its
;; height to fit the input text - the height is reset when inputting
;; is done. To help you perceive changes to different minibuffer
;; recursion levels, the background color of the minibuffer frame is
;; changed slightly with each recursion-depth change.
;;
;; This library is especially useful if used in combination with
;; One-on-One Emacs libraries `autofit-frame.el', which automatically
;; fits frames to their sole window, and `fit-frame.el', which lets
;; you fit a frame to its selected window manually. Library
;; `autofit-frame.el' uses library `fit-frame.el'.
;;
;; Because Emacs is not really designed to be frame-oriented, there
;; are many built-in and standard functions that produce
;; less-than-optimal results when frames, instead of windows, are the
;; default. In other One-on-One Emacs libraries, I have fixed most
;; of these built-in functions to play well with frames.
;;
;; For more information on One-on-One Emacs see
;; http://www.emacswiki.org/cgi-bin/wiki/OneOnOneEmacs.
;;
;; To use this library, put the following at the *END* of your init
;; file, `.emacs' (or `_emacs'). In particular, if your init file
;; contains a `custom-set-variables' expression, then the following
;; must appear *AFTER* that expression, in order for this to take
;; into account your customizations of any `1on1-' user options.
;;
;; (require 'oneonone)
;; (1on1-emacs)
;;
;; Initial frame: By default, the initial Emacs frame is like all
;; other normal (non-special-display) frames; that is,
;; `initial-frame-alist' effectively uses the frame properties
;; defined in `default-frame-alist'. If you would like the initial
;; frame to be different, set `default-frame-alist' to nil after
;; requiring `oneonone.el' but before executing `1on1-emacs':
;;
;; (require 'oneonone)
;; (setq default-frame-alist nil)
;; (setq initial-frame-alist '((background-color . "White"))); e.g.
;; (1on1-emacs)
;;
;; If you want the text cursor to change to a box when Emacs is idle,
;; then add this line also to your init file:
;;
;; (toggle-box-cursor-when-idle 1) ; Turn on box cursor when idle.
;;
;; Info and Customize frames: I recommend that you put the following
;; code in your init file, so that Info and Customize buffers will
;; display in their own frames. Which code to use depends on your
;; version of GNU Emacs.
;;
;; (cond ((< emacs-major-version 21)
;; (remove-hook 'same-window-buffer-names "*info*"))
;; ((= emacs-version 21)
;; (remove-hook 'same-window-buffer-names "*info*")
;; (remove-hook 'same-window-regexps "\\`\\*Customiz.*\\*\\'"))
;; (t
;; (remove-hook 'same-window-regexps "\\*info\\*\\(\\|<[0-9]+>\\)")
;; (remove-hook 'same-window-regexps "\\`\\*Customiz.*\\*\\'")))
;;
;; Recommended key bindings (requires library `fit-frame.el'):
;;
;; (define-key minibuffer-local-map "\C-o"
;; '1on1-fit-minibuffer-frame)
;; (define-key minibuffer-local-must-match-map "\C-o"
;; '1on1-fit-minibuffer-frame)
;; (define-key minibuffer-local-completion-map "\C-o"
;; '1on1-fit-minibuffer-frame)
;;
;;
;; Notes on user options defined here:
;; ---------------------------------
;;
;; Some user options are used here only as conveniences to define
;; frame-parameter alists. They are defined using `defvar', not
;; `defcustom', because you cannot use Customize to define them
;; independently of the alist user options they help to define. The
;; alists themselves are the variables to customize. If you want to
;; change the `defvar' variables individually and then use them to
;; set the alist variables, then use `setq', not Customize, to change
;; them, and restart Emacs for their changes to take effect.
;;
;; Changes to any user options defined here with `defcustom' will
;; take effect as soon as `1on1-emacs' is executed, so you can do
;; `M-x 1on1-emacs' to see their changes (no need to restart
;; Emacs).
;;
;; User options `1on1-color-minibuffer-frame-on-setup-increment' and
;; `1on1-color-minibuffer-frame-on-exit-increment' determine how much
;; to change the color of the minibuffer frame when the minibuffer is
;; entered and exitted. They are hue increments, and should be
;; opposite in sign. They should cancel each other out, so that the
;; color returns to what it was initially at any given
;; recursive-minibuffer depth. However, because of the way HSV and
;; RGB color-component conversion works, the best cancellation does
;; not occur when these have the same absolute value. And, how much
;; their absolute values should differ depends on that magnitude.
;; It's best to just set one of these to an increment you like, and
;; then fiddle with the other until they more or less cancel.
;;
;;
;; New functions and macros defined here (each has prefix `1on1-'):
;;
;; `box-cursor-when-idle', `change-cursor-on-input-method',
;; `change-cursor-on-overwrite/read-only',
;; `color-minibuffer-frame-on-exit',
;; `color-minibuffer-frame-on-setup',
;; `color-isearch-minibuffer-frame', `display-*Completions*-frame',
;; `display-*Help*-frame', `emacs', `fit-minibuffer-frame',
;; `flash-ding-minibuffer-frame', `increment-color-hue',
;; `minibuffer-prompt-end', `reset-minibuffer-frame',
;; `set-box-cursor-when-idle-interval', `set-cursor-type',
;; `set-minibuffer-frame-top/bottom', `set-minibuffer-frame-width',
;; `setup-minibuffer-frame-coloring',
;; `setup-mode-line'. `toggle-box-cursor-when-idle'.
;;
;; Customizable user options defined here (each has prefix `1on1-'):
;;
;; `*Completions*-frame-flag', `*Completions*-frame-at-right-flag',
;; `*Help*-frame-flag', `active-minibuffer-frame-background',
;; `active-mode-line-background',
;; `change-cursor-on-overwrite/read-only-flag',
;; `color-minibuffer-frame-on-exit-increment',
;; `color-minibuffer-frame-on-setup-increment',
;; `color-mode-line-flag', `completions-frame-background',
;; `completions-frame-mouse+cursor-color',
;; `completions-frame-width', `default-frame-alist',
;; `help-frame-background', `help-frame-mouse+cursor-color',
;; `inactive-minibuffer-frame-background',
;; `inactive-mode-line-background',
;; `isearch-minibuffer-frame-background', `minibuffer-frame-alist',
;; `minibuffer-frame-left', `minibuffer-frame-top/bottom',
;; `minibuffer-frame-width', `minibuffer-frame-width-percent',
;; `special-display-frame-alist'.
;;
;; Non-customizable user options defined here (prefix `1on1-'):
;;
;; `default-frame-background', `default-frame-cursor-color',
;; `default-frame-cursor-color-input-method',
;; `default-frame-cursor-type',
;; `default-frame-cursor-type-overwrite/read-only',
;; `default-frame-font', `default-frame-foreground',
;; `default-frame-menu-bar-lines', `default-frame-mouse-color',
;; `default-frame-size', `default-frame-upper-left-corner',
;; `default-special-frame-background',
;; `default-special-frame-cursor-color',
;; `default-special-frame-font',
;; `default-special-frame-foreground',
;; `default-special-frame-menu-bar-lines',
;; `default-special-frame-mouse-color',
;; `default-special-frame-size',
;; `default-special-frame-upper-left-corner',
;; `minibuffer-frame-background', `minibuffer-frame-cursor-color',
;; `minibuffer-frame-flag', `minibuffer-frame-font',
;; `minibuffer-frame-foreground', `minibuffer-frame-height',
;; `minibuffer-frame-mouse-color'.
;;
;; Other new variables defined here (each has prefix `1on1-'):
;;
;; `box-cursor-when-idle-p', `box-cursor-when-idle-interval',
;; `box-cursor-when-idle-timer', `last-cursor-type',
;; `minibuffer-frame'.
;;
;;
;; ***** NOTE: These EMACS PRIMITIVES have been REDEFINED HERE:
;;
;; `abort-recursive-edit', `top-level' -
;; Reset color of minibuffer frame to "inactive" color.
;;
;; `y-or-n-p' - Temporarily color minibuffer frame to "active" color.
;;
;;
;; Acknowledgements:
;;
;; The cursor-changing on input method and read-only was inspired by
;; Juri Linkov <juri@jurta.org>. Joe Casadonte <joc@netaxs.com>
;; wrote a similar hook (`joc-cursor-type-set-hook'), which he got
;; from Steve Kemp...
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Change log:
;;
;; 2007/12/05 dadams
;; 1on1-minibuffer-frame-left: Added :type.
;; 1on1-color-mode-line-flag, 1on1-minibuffer-frame-flag: defvar -> defcustom.
;; 1on1-(minibuffer|(special-)default)-frame-*: Removed * doc-string prefix.
;; 2007/11/22 dadams
;; Added: 1on1-reset-minibuffer-frame, 1on1-fit-minibuffer-frame,
;; 1on1-minibuffer-prompt-end. Recommend C-o key binding.
;; Use 1on1-reset-minibuffer-frame on minibuffer-exit-hook.
;; 2007/08/14 dadams
;; 1on1-emacs:
;; Add *Completions* to special-display-buffer-names even if
;; 1on1-*Completions*-frame-flag is nil, so minibuffer gets focus.
;; Set w(in)32-grab-focus-on-raise to nil.
;; 1on1-display-*Completions*-frame:
;; Don't change mouse pointer unless 1on1-*Completions*-frame-flag.
;; 1on1-minibuffer-frame-background: Use std minibuffer-frame-alist bg, if defined.
;; 2007/05/28 dadams
;; 1on1-display-*Completions*-frame:
;; Wrap zoom-frm-out in condition-case (hack for Emacs 23 problem changing size).
;; 2007/03/10 dadams
;; Added: 1on1-completions-frame-width. Use it in 1on1-emacs.
;; 2007/02/08 dadams
;; Removed: ^L-appearance-vector.
;; 1on1-emacs: No longer change ^L appearance - use my library pp-c-l.el to do that.
;; 2007/02/04 dadams
;; 1on1-emacs:
;; Initialize standard-display-table if nil (default is nil!). Thx to FidelSalas.
;; 2006/12/27 dadams
;; 1on1-change-cursor-on-input-method: Respect 1on1-change-cursor-on-input-method-flag
;; 2006/12/12 dadams
;; Added: 1on1-^L-appearance-vector.
;; 1on1-emacs: Use 1on1-^L-appearance-vector to set ^L appearance.
;; 2006/12/11 dadams
;; 1on1-set-minibuffer-frame-top/bottom: 2 chars up, not 1, to fit Emacs 22 better.
;; 2006/10/28 dadams
;; 1on1-(in)active-minibuffer-frame-background,
;; 1on1-isearch-minibuffer-frame-background, 1on1-(in)active-mode-line-background,
;; 1on1-(help|completions)-frame-background,
;; 1on1-(help|completions)-frame-mouse+cursor-color,
;; 1on1-default-frame-cursor-color(-input-method):
;; Changed :type to 'color for Emacs 21+.
;; 2006/09/14 dadams
;; Removed mode-line position enhancements - use new library modeline-posn.el.
;; Removed: 1on1-color-mode-line-column-flag, 1on1-mode-line-column-limit.
;; 2006/09/04 dadams
;; 1on1-box-cursor-when-idle-timer: Cancel beforehand, and cancel after defining.
;; 1on1-toggle-box-cursor-when-idle:
;; Use 1on1-box-cursor-when-idle-off on pre-command-hook.
;; Don't read an event; just turn it on.
;; Added: 1on1-box-cursor-when-idle-off.
;; 2006/09/02 dadams
;; 1on1-toggle-box-cursor-when-idle: Corrected.
;; 2006/08/27 dadams
;; Added: 1on1-box-cursor-when-idle(-p|-interval|-timer), 1on1-last-cursor-type,
;; (1on1-)toggle-box-cursor-when-idle, 1on1-set-box-cursor-when-idle-interval.
;; 2006/08/13 dadams
;; defalias set-cursor-type to 1on1-set-cursor-type.
;; 2006/07/25 dadams
;; Added: 1on1-minibuffer-frame-left. Use in 1on1-minibuffer-frame-alist.
;; 2006/03/31 dadams
;; 1on1-default-frame-alist:
;; Changed (left|right)-fringe code, to reflect Emacs 22 change.
;; 2006/03/17 dadams
;; Renamed:
;; 1on1-color-active-minibuffer-frame to 1on1-color-minibuffer-frame-on-setup,
;; 1on1-color-inactive-minibuffer-frame to 1on1-color-minibuffer-frame-on-exit.
;; 1on1-color-minibuffer-frame-on-setup:
;; Redefined so hue depends on minibuffer-depth.
;; 2006/03/14 dadams
;; 1on1-color-(in)active-minibuffer-frame: Change hue for each minibuffer recursion.
;; Added: 1on1-increment-color-hue.
;; Require hexrgb.el
;; 2006/03/13 dadams
;; 1on1-color-inactive-minibuffer-frame:
;; Change color only when not in recursive minibuffer.
;; abort-recursive-edit: Change minibuffer color after, not before, abort.
;; 2006/01/07 dadams
;; Added :link
;; 2005/12/14 dadams
;; Added: 1on1-*Completions*-frame-at-right-flag.
;; Use in 1on1-display-*Completions*-frame.
;; 2005/11/28 dadams
;; Added: 1on1-change-cursor-on-overwrite-flag,
;; 1on1-change-cursor-on-input-method-flag, 1on1-default-frame-cursor-type,
;; 1on1-default-frame-cursor-type-overwrite, 1on1-default-frame-cursor-color,
;; 1on1-default-frame-cursor-color-input-mode, 1on1-change-cursor-on-overwrite,
;; 1on1-change-cursor-on-insert-mode, 1on1-set-cursor-type (thanks to
;; Juri Linkov for the last three).
;; 1on1-emacs: Use 1on1-change-cursor-* in post-command-hook.
;; 1on1-mode-line-column-limit: Corrected custom group.
;; 2005/11/22 dadams
;; Added: 1on1-setup-mode-line, 1on1-mode-line-column-limit,
;; 1on1-color-mode-line(-column)-flag, 1on1-(in)active-mode-line-background.
;; 2005/10/28 dadams
;; 1on1-display-*Completions*-frame: Zoom to smaller font.
;; 2005/07/31 dadams
;; 1on1-emacs: Do not set initial-frame-alist to default-frame-alist (D. Reitter).
;; 2005/07/25 dadams
;; Added :prefix to defgroup.
;; 2005/07/17 dadams
;; Switched default colors for 1on1-(in)active-minibuffer-frame-background,
;; so active is the brighter color. Change inactive to LightBlue.
;; 2005/06/01 dadams
;; Corrected typo that gave minibuffer frame a vertical scroll bar.
;; 2005/05/29 dadams
;; *-alist: Use values from standard alist variables, if available (that is,
;; don't override user settings.)
;; 2005/05/28 dadams
;; Renamed: 1on1-separate-minibuffer-frame-flag -> 1on1-minibuffer-frame-flag,
;; 1on1-separate-*Help*-frame-flag -> 1on1-*Help*-frame-flag,
;; 1on1-separate-*Completions*-frame-flag -> 1on1-*Completions*-frame-flag.
;; Added: setup-minibuffer-frame-coloring.
;; Added info in doc strings about use of each variable (restart/1on1-emacs).
;; Corrected 1on1-minibuffer-frame-alist and 1on1-special-display-frame-alist
;; for menu-bar-lines (nil).
;; 1on1-set-minibuffer-frame-top/bottom: Rewrote with modify-frame-parameters.
;; 1on1-emacs:
;; Make sensitive to any changes to 1on1-*[Help|Completions]*-frame-flag.
;; Move defcustom's, defvar's, and defun's outside 1on1-emacs.
;; If 1on1-minibuffer-frame already exists, just modify it.
;; Don't step on other parameters in standard alists; just append new values.
;; 2005/05/23 dadams
;; Changed some individual frame-parameter variables from defcustom to defvar.
;; Left them as user options, however, so you can change them with
;; set-variable before loading oneonone.el.
;; Renamed:
;; 1on1-upper-left-frame-corner-default ->
;; 1on1-default-frame-upper-left-corner
;; 1on1-default-special-display-frame-size ->
;; 1on1-default-special-frame-size
;; 1on1-upper-left-special-display-frame-corner-default ->
;; 1on1-default-special-frame-upper-left-corner
;; Split 1on1-menu-bar-lines into: 1on1-default-special-frame-menu-bar-lines,
;; 1on1-default-frame-menu-bar-lines
;; 2005/05/18 dadams
;; Fixed typo: "oneoneone" -> "oneonone".
;; 2005/05/17 dadams
;; Updated to work with Emacs 22.x.
;; 2005/05/09 dadams
;; Major reorganization/rewrite. Created, from previous version setup-frames.el.
;; Added prefix "1on1-".
;; Encapsulated stuff in new command 1on1-emacs.
;; 2005/01/29 dadams
;; 1on1-default-frame-font: Fixed bug - misplaced parens, so no good if not Windows.
;; 2005/01/19 dadams
;; Use defcustom now.
;; Removed (put ... 'variable-interactive...).
;; 1on1-minibuffer-frame-top/bottom: Must be an integer (for set-frame-position).
;; 2004/12/18 dadams
;; Bind after-make-frame-functions to nil when create 1on1-minibuffer-frame.
;; 2004/11/26 dadams
;; Removed ;;;###autoload's.
;; 2004/11/20 dadams
;; Refined to deal with Emacs 21 < 21.3.50 (soon to be 22.x)
;; 2004/10/01 dadams
;; Ensure loaded before compile.
;; No fringe.
;; Remove *info* and *Customiz.* buffers from `same-window-regexps'
;; 2004/09/21 dadams
;; Updated to work with Emacs 21 (and Emacs 20).
;; 2004/03/19 dadams
;; 1on1-minibuffer-frame-width -> 1on1-set-minibuffer-frame-width.
;; added 1on1-set-minibuffer-frame-top/bottom.
;; 2001/01/05 dadams
;; 1. 1on1-minibuffer-frame-width: Use 1on1-minibuffer-frame arg for frame-char-width.
;; 2. Don't define width when initially set 1on1-minibuffer-frame-alist. Instead,
;; use set-frame-width afterward, so 1on1-minibuffer-frame-width uses correct
;; character size.
;; 2001/01/05 dadams
;; 1. These vars no longer user options (interactively changeable):
;; 1on1-completions-frame-background, 1on1-completions-frame-mouse+cursor-color,
;; 1on1-help-frame-background, 1on1-help-frame-mouse+cursor-color,
;; 1on1-minibuffer-frame-cursor-color, 1on1-minibuffer-frame-font,
;; 1on1-minibuffer-frame-foreground, 1on1-minibuffer-frame-height,
;; 1on1-minibuffer-frame-mouse-color, 1on1-minibuffer-frame-top/bottom,
;; 1on1-minibuffer-frame-width.
;; 2. Added: 1on1-minibuffer-frame-width (function),
;; 1on1-minibuffer-frame-width-percent (var).
;; 3. Changed var 1on1-minibuffer-frame-width to nil default (now use *-percent).
;; 2000/09/27 dadams
;; 1. Added: 1on1-display-*Completions*-frame, 1on1-display-*Help*-frame.
;; 2. *Help* & *Completions* frames not created here. Instead, use
;; special-display-buffer-names & display-*-frame fns to define them.
;; 3. Added: top-level, abort-recursive-edit.
;; 1999/08/24 dadams
;; 1. Windows: win32-grab-focus-on-raise = nil.
;; 2. 1on1-default-frame-font different if Windows.
;; 3. Added: 1on1-separate-minibuffer-frame-flag, 1on1-menu-bar-lines,
;; 1on1-upper-left-frame-corner-default, 1on1-default-frame-size,
;; 1on1-upper-left-special-display-frame-corner-default,
;; 1on1-default-special-display-frame-size, 1on1-default-special-frame-foreground,
;; 1on1-default-special-frame-background, 1on1-default-special-frame-font,
;; 1on1-default-special-frame-mouse-color, 1on1-default-special-frame-cursor-color.
;; 4. Use new vars to define default-frame-alist, special-display-frame-alist.
;; 5. Only create built-in frames if 1on1-separate-minibuffer-frame-flag.
;; 6. Protected refs to x-* vars.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; This program is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.
;; This program is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
;; along with this program; see the file COPYING. If not, write to
;; the Free Software Foundation, Inc., 51 Franklin Street, Fifth
;; Floor, Boston, MA 02110-1301, USA.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Code:
(eval-and-compile (require 'cl)) ;; remove-if (plus, for Emacs < 20, when, unless)
(require 'frame-cmds nil t) ;; (no error if not found): rename-frame
(require 'files+ nil t) ;; (no error if not found): switch-to-buffer-other-frame
(require 'zoom-frm nil t) ;; (no error if not found): zoom-frm-out
(require 'hexrgb) ;; hexrgb-color-values-to-hex, hexrgb-hsv-to-rgb, hexrgb-rgb-to-hsv
;; Ensure that this is loaded before compiling it.
(provide 'oneonone)
(require 'oneonone)
;; To quiet the byte compiler
(unless (> emacs-major-version 21)
(defvar x-pointer-box-spiral)
(defvar x-pointer-xterm))
;;;;;;;;;;;;;;;;;;;;;;;;
(defgroup One-On-One nil
"Options to define initial frame configuration."
:prefix "1on1-" :group 'frames
:link `(url-link :tag "Send Bug Report"
,(concat "mailto:" "drew.adams" "@" "oracle" ".com?subject=\
oneonone.el bug: \
&body=Describe bug here, starting with `emacs -q'. \
Don't forget to mention your Emacs and library versions."))
:link '(url-link :tag "Other Libraries by Drew"
"http://www.emacswiki.org/cgi-bin/wiki/DrewsElispLibraries")
:link '(url-link :tag "Download" "http://www.emacswiki.org/cgi-bin/wiki/oneonone.el")
:link '(url-link :tag "Description"
"http://www.emacswiki.org/cgi-bin/wiki/OneOnOneEmacs")
:link '(emacs-commentary-link :tag "Commentary" "oneonone")
)
\f
;;; Minibuffer frame: ********************************
;;;
(defvar 1on1-minibuffer-frame nil
"Minibuffer-only frame used by One-on-One Emacs.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.")
(defcustom 1on1-minibuffer-frame-flag t
"*Non-nil means use a separate, specialized frame for the minibuffer.
If you change this variable, you will need to restart Emacs for it to
take effect."
:type 'boolean :group 'One-On-One)
(defvar 1on1-minibuffer-frame-foreground "Red"
"Default foreground color for the minibuffer frame.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-minibuffer-frame-background
(or (cdr (assq 'background-color minibuffer-frame-alist)) "LightBlue")
"Initial color of the `1on1-minibuffer-frame' background.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defcustom 1on1-active-minibuffer-frame-background "PaleGoldenrod"
"*The color of the `1on1-minibuffer-frame' when it is active.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-inactive-minibuffer-frame-background 1on1-minibuffer-frame-background
"*The color of the `1on1-minibuffer-frame' when it is inactive.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-isearch-minibuffer-frame-background "bisque"
"*Color of the `1on1-minibuffer-frame' when `isearch' is active.
See `1on1-color-isearch-minibuffer-frame'.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-color-mode-line-flag t
"*Non-nil means use `1on1-(in)active-mode-line-background'.
If you change this variable, you will need to restart Emacs for it to
take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-color-minibuffer-frame-on-exit-increment 5
"Increment to change minibuffer-frame hue when minibuffer is exited.
This should be opposite in sign to
`1on1-color-minibuffer-frame-on-setup-increment.'"
:type 'integer :group 'One-On-One)
(defcustom 1on1-color-minibuffer-frame-on-setup-increment -10
"Increment to change minibuffer-frame hue when minibuffer is entered.
This should be opposite in sign to
`1on1-color-minibuffer-frame-on-exit-increment.'"
:type 'integer :group 'One-On-One)
(defcustom 1on1-active-mode-line-background 1on1-active-minibuffer-frame-background
"*The color of the mode-line when it is active.
Note: This is not used if `1on1-color-mode-line-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-inactive-mode-line-background "LightGray"
"*The color of the mode-line when it is inactive.
Note: This is not used if `1on1-color-mode-line-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defvar 1on1-minibuffer-frame-font
(if (eq system-type 'windows-nt)
"-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1"
;;;;;;;"-*-Lucida Console-normal-r-*-*-15-*-*-*-c-*-*-ansi-"
"-Misc-Fixed-Medium-R-Normal--15-140-75-75-C-90-ISO8859-1")
"Default font for the minibuffer frame.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-minibuffer-frame-mouse-color "Black"
"Default mouse color for the minibuffer frame.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-minibuffer-frame-cursor-color "Black"
"Default text cursor color for the minibuffer frame.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-minibuffer-frame-height 2
"Height of minibuffer frame, in characters.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defcustom 1on1-minibuffer-frame-left 0
"*Position of left edge of minibuffer frame, in pixels.
An integer. If negative, then the position is that of the frame
bottom relative to the screen right (not left) edge.
See `default-frame-alist' for an explanation of frame parameters.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'integer :group 'One-On-One)
(defcustom 1on1-minibuffer-frame-top/bottom nil
"*Position of top (or bottom) of minibuffer frame, in pixels.
If nil, function `1on1-set-minibuffer-frame-top/bottom' will position
minibuffer at bottom of display.
An integer. If negative, then the position is that of the frame
bottom relative to the screen bottom.
See `default-frame-alist' for an explanation of frame parameters.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type '(choice (const :tag "Use function `1on1-set-minibuffer-frame-top/bottom'" nil)
(integer :tag "Pixels from top (>= 0) or bottom (< 0)" :value 0))
:group 'One-On-One)
(defcustom 1on1-minibuffer-frame-width nil
"Width, in characters, for minibuffer frame.
If nil, then function `1on1-set-minibuffer-frame-width' is used instead.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type '(choice (const :tag "Use function `1on1-set-minibuffer-frame-width'" nil)
(integer :tag "Width, in characters, for minibuffer frame" :value 0))
:group 'One-On-One)
(defcustom 1on1-minibuffer-frame-width-percent 100
"Max percent of the total display width to give to minibuffer frame.
See function `1on1-set-minibuffer-frame-width'.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'integer :group 'One-On-One)
;; Use values from the standard list, when available. However, we have no way of
;; distinguishing values predefined in vanilla Emacs from user settings.
(defcustom 1on1-minibuffer-frame-alist
(list
(or (assq 'foreground-color minibuffer-frame-alist)
(cons 'foreground-color 1on1-minibuffer-frame-foreground))
(or (assq 'background-color minibuffer-frame-alist)
(cons 'background-color 1on1-minibuffer-frame-background))
(or (assq 'font minibuffer-frame-alist)
(cons 'font 1on1-minibuffer-frame-font))
(or (assq 'mouse-color minibuffer-frame-alist)
(cons 'mouse-color 1on1-minibuffer-frame-mouse-color))
(or (assq 'cursor-color minibuffer-frame-alist)
(cons 'cursor-color 1on1-minibuffer-frame-cursor-color))
(or (assq 'menu-bar-lines minibuffer-frame-alist)
(cons 'menu-bar-lines nil))
(or (assq 'left minibuffer-frame-alist)
(cons 'left 1on1-minibuffer-frame-left))
(or (assq 'height minibuffer-frame-alist)
(cons 'height 1on1-minibuffer-frame-height))
(or (assq 'icon-type minibuffer-frame-alist)
(cons 'icon-type (< emacs-major-version 21))) ; `t' for Emacs 21 too?
(or (assq 'minibuffer minibuffer-frame-alist)
(cons 'minibuffer 'only))
(or (assq 'user-position minibuffer-frame-alist)
(cons 'user-position t))
(or (assq 'vertical-scroll-bars minibuffer-frame-alist) ; No scroll bar.
(cons 'vertical-scroll-bars nil))
(or (assq 'name minibuffer-frame-alist)
(cons 'name "Emacs Minibuffer")))
"Frame-parameter alist for the standalone minibuffer frame
`1on1-minibuffer-frame'.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
;; If we didn't need Emacs 20 compatibility, this could be:
;; :type '(alist :key-type symbol :value-type sexp)
:type '(repeat (cons :format "%v" (symbol :tag "Frame Parameter") (sexp :tag "Value")))
:group 'One-On-One)
\f
;;; *Help* frame: ********************************
;;; Display of *Help* buffer in custom frame.
;;; Background, height, cursor and pointer colors.
;;;
(defcustom 1on1-*Help*-frame-flag t
"*Non-nil means use a special appearance for the *Help* frame.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-help-frame-background "Thistle"
"Default background color for the *Help* buffer's frame.
Note: This is not used if `1on1-*Help*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-help-frame-mouse+cursor-color "Blue Violet"
"Default color for cursor & pointer of *Help* frame.
Note: This is not used if `1on1-*Help*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
\f
;;; *Completions* frame: ********************************
;;; Display of *Completion* buffer in custom frame.
;;; Background, height, cursor and pointer colors.
;;;
(defcustom 1on1-*Completions*-frame-flag t
"*Non-nil means use a special appearance for the *Completions* frame.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-*Completions*-frame-at-right-flag nil
"*Non-nil means place *Completions* frame at right edge of display.
This can be useful to make *Completions* more visible.
This has no effect if `1on1-*Completions*-frame-flag' is nil."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-completions-frame-background "LavenderBlush2"
"Default background color for the *Completions* buffer's frame.
Note: This is not used if `1on1-*Completions*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-completions-frame-mouse+cursor-color "VioletRed"
"Default color for cursor & pointer of *Completions* frame.
Note: This is not used if `1on1-*Completions*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-completions-frame-width 100
"Width, in characters, for *Completions* frame.
If this is nil, then the pertinent default frame width is used.
Note: This is not used if `1on1-*Completions*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'integer :group 'One-On-One)
\f
;;; Default for normal frames: `1on1-default-frame-alist' **************************
;;;
(defvar 1on1-default-frame-foreground "Black"
"Default foreground color for non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-background "LightBlue"
"Default background color for non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-font
(if (eq system-type 'windows-nt)
"-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1"
;;;;;;"-*-Lucida Console-normal-r-*-*-15-*-*-*-c-*-*-ansi-"
"-Misc-Fixed-Medium-R-Normal--15-140-75-75-C-90-ISO8859-1")
"Default font for non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-mouse-color "Red"
"Default mouse-pointer color for non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defcustom 1on1-change-cursor-on-input-method-flag t
"*Non-nil means to use a different cursor when using an input method.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-default-frame-cursor-color "Red"
"*Default text cursor color for non-special frames.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect. Furthermore, if
`1on1-change-cursor-on-input-method-flag' is nil when you rerun
`1on1-emacs', you will need to toggle that variable to non-nil (and
back to nil, if that's the value you want). Otherwise, the new value
will take effect only after you restart Emacs."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-default-frame-cursor-color-input-method "Orange"
"*Default cursor color for non-special frames if using an input method.
This has no effect if `1on1-change-cursor-on-input-method-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-change-cursor-on-overwrite/read-only-flag t
"*Non-nil means use a different cursor when overwrite mode or read-only.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-default-frame-cursor-type 'bar
"*Default text cursor type for non-special frames.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect. Furthermore, if
`1on1-change-cursor-on-overwrite/read-only-flag' is nil when you rerun
`1on1-emacs', you will need to toggle that variable to non-nil (and
back to nil, if that's the value you want). Otherwise, the new value
will take effect only after you restart Emacs."
:type 'symbol :group 'One-On-One)
(defvar 1on1-last-cursor-type 1on1-default-frame-cursor-type "Saved last cursor type.")
(defcustom 1on1-default-frame-cursor-type-overwrite/read-only 'box
"*Default text cursor type for overwrite mode or read-only buffer.
This applies only to non-special frames. This has no effect if
`1on1-change-cursor-on-overwrite/read-only-flag' is nil. If you
customize this variable, you will need to rerun `1on1-emacs' for the
new value to take effect."
:type 'symbol :group 'One-On-One)
(defvar 1on1-box-cursor-when-idle-p t
"Non-nil means to use a box cursor whenever Emacs is idle.
Do NOT change this yourself; instead, use `\\[toggle-box-cursor-when-idle]'.")
(defvar 1on1-box-cursor-when-idle-interval 2
"Number of seconds to wait before changing cursor type to box.
Do NOT change this yourself to change the wait period; instead, use
`\\[1on1-set-box-cursor-when-idle-interval]'.")
(defvar 1on1-box-cursor-when-idle-timer
(progn ; Cancel to prevent duplication.
(when (boundp '1on1-box-cursor-when-idle-timer)
(cancel-timer 1on1-box-cursor-when-idle-timer))
(run-with-idle-timer 1on1-box-cursor-when-idle-interval t '1on1-box-cursor-when-idle))
"Timer used to change the cursor to a box cursor when Emacs is idle.")
;; Turn it off, by default. You must use `toggle-box-cursor-when-idle' to turn it on.
(cancel-timer 1on1-box-cursor-when-idle-timer)
(defvar 1on1-default-frame-menu-bar-lines 1
"Number of lines used for the menu bar in non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-upper-left-corner '(0 . 0)
"Position of upper left frame corner.
A cons whose car is the distance from the top in pixels
and whose cdr is the distance from the left in pixels.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-size '(80 . 35)
"Default frame size.
A cons whose car is the frame width in pixels
and whose cdr is the frame height in pixels.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
;; Use values from the standard list, when available. However, we have no way of
;; distinguishing values predefined in vanilla Emacs from user settings.
(defcustom 1on1-default-frame-alist
(list
(or (assq 'foreground-color default-frame-alist)
(cons 'foreground-color 1on1-default-frame-foreground))
(or (assq 'background-color default-frame-alist)
(cons 'background-color 1on1-default-frame-background))
(or (assq 'font default-frame-alist)
(cons 'font 1on1-default-frame-font))
(or (assq 'mouse-color default-frame-alist)
(cons 'mouse-color 1on1-default-frame-mouse-color))
(or (assq 'cursor-color default-frame-alist)
(cons 'cursor-color 1on1-default-frame-cursor-color))
(or (assq 'cursor-type default-frame-alist)
(cons 'cursor-type 1on1-default-frame-cursor-type))
(or (assq 'menu-bar-lines default-frame-alist)
(cons 'menu-bar-lines 1on1-default-frame-menu-bar-lines))
(or (assq 'top default-frame-alist)
(cons 'top (car 1on1-default-frame-upper-left-corner)))
(or (assq 'left default-frame-alist)
(cons 'left (cdr 1on1-default-frame-upper-left-corner)))
(or (assq 'width default-frame-alist)
(cons 'width (car 1on1-default-frame-size)))
(or (assq 'height default-frame-alist)
(cons 'height (cdr 1on1-default-frame-size)))
(or (assq 'minibuffer default-frame-alist)
(cons 'minibuffer (not 1on1-minibuffer-frame-flag)))
(or (assq 'user-position default-frame-alist)
(cons 'user-position t))
(or (assq 'vertical-scroll-bars default-frame-alist)
(cons 'vertical-scroll-bars 'right))
(or (assq 'icon-type default-frame-alist)
(cons 'icon-type (< emacs-major-version 21))) ; `t' for Emacs 21 too?
(or (assq 'tool-bar-lines default-frame-alist)
(cons 'tool-bar-lines 1)) ; Emacs 21+
(if (cdr (assq 'left-fringe default-frame-alist))
(assq 'left-fringe default-frame-alist)
(cons 'left-fringe 0)) ; Emacs 21+
(if (cdr (assq 'right-fringe default-frame-alist))
(assq 'right-fringe default-frame-alist)
(cons 'right-fringe 0)) ; Emacs 21+
(or (assq 'fringe default-frame-alist)
(cons 'fringe 0))) ; Emacs 21, but not 21.3.50 - REMOVE after 22.x
"Properties to be used for One-on-One Emacs `default-frame-alist'.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
;; If we didn't need Emacs 20 compatibility, this could be:
;; :type '(alist :key-type symbol :value-type sexp)
:type '(repeat (cons :format "%v" (symbol :tag "Frame Parameter") (sexp :tag "Value")))
:group 'One-On-One)
\f
;;; Special-display frames: `1on1-special-display-frame-alist' ************************
;;;
(defvar 1on1-default-special-frame-foreground "Black"
"Default foreground color for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-background "LightSteelBlue"
"Default background color for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-font
(if (eq system-type 'windows-nt)
"-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1"
;;;;;;;;"-*-Lucida Console-normal-r-*-*-15-*-*-*-c-*-*-ansi-"
"-Misc-Fixed-Medium-R-Normal--15-140-75-75-C-90-ISO8859-1")
"Default font for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-mouse-color "Yellow"
"Default mouse color for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-cursor-color "Yellow"
"Default text cursor color for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-menu-bar-lines 1
"Number of lines used for the menu bar of special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-upper-left-corner '(0 . 0)
"Position of upper left corner of special display frames.
A cons whose car is the distance from the top in pixels
and whose cdr is the distance from the left in pixels.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-size '(80 . 20)
"Default size of special display frames.
A cons whose car is the frame width in pixels
and whose cdr is the frame height in pixels.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
;; Use values from the standard list, when available. However, we have no way of
;; distinguishing values predefined in vanilla Emacs from user settings.
(defcustom 1on1-special-display-frame-alist
(list
(or (assq 'font special-display-frame-alist)
(cons 'font 1on1-default-special-frame-font))
(or (assq 'width special-display-frame-alist)
(cons 'width (car 1on1-default-special-frame-size)))
(or (assq 'height special-display-frame-alist)
(cons 'height (cdr 1on1-default-special-frame-size)))
(or (assq 'mouse-color special-display-frame-alist)
(cons 'mouse-color 1on1-default-special-frame-mouse-color))
(or (assq 'cursor-color special-display-frame-alist)
(cons 'cursor-color 1on1-default-special-frame-cursor-color))
(or (assq 'menu-bar-lines special-display-frame-alist)
(cons 'menu-bar-lines 1on1-default-special-frame-menu-bar-lines))
(or (assq 'foreground-color special-display-frame-alist)
(cons 'foreground-color 1on1-default-special-frame-foreground))
(or (assq 'background-color special-display-frame-alist)
(cons 'background-color 1on1-default-special-frame-background))
(or (assq 'top special-display-frame-alist)
(cons 'top (car 1on1-default-special-frame-upper-left-corner)))
(or (assq 'left special-display-frame-alist)
(cons 'left (cdr 1on1-default-special-frame-upper-left-corner)))
(or (assq 'unsplittable special-display-frame-alist)
(cons 'unsplittable t))
(or (assq 'user-position special-display-frame-alist)
(cons 'user-position t))
(or (assq 'vertical-scroll-bars special-display-frame-alist)
(cons 'vertical-scroll-bars 'right)))
"Properties to be used for One-on-One `special-display-frame-alist'.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
;; If we didn't need Emacs 20 compatibility, this could be:
;; :type '(alist :key-type symbol :value-type sexp)
:type '(repeat (cons :format "%v" (symbol :tag "Frame Parameter") (sexp :tag "Value")))
:group 'One-On-One)
\f
;;; Main command ***************************************
;;;
;;;###autoload
(defun 1on1-emacs ()
"One-on-One Emacs setup.
Use `1on1-default-frame-alist' and `1on1-special-display-frame-alist'.
If `1on1-minibuffer-frame-flag' is non-nil, then create
minibuffer-only frame, `1on1-minibuffer-frame', using
`1on1-minibuffer-frame-alist'.
If `1on1-separate-minibuffer-*Help*-flag' is non-nil, then use
special frame for *Help* buffer.
If `1on1-separate-minibuffer-*Completions*-flag' is non-nil, then
use special frame for *Completions* buffer."
(interactive)
(setq default-frame-alist (append 1on1-default-frame-alist default-frame-alist)
special-display-frame-alist (append 1on1-special-display-frame-alist
special-display-frame-alist))
;; *Help* frame
(if 1on1-*Help*-frame-flag
(add-to-list
'special-display-buffer-names
(list "*Help*" '1on1-display-*Help*-frame
(list (cons 'background-color 1on1-help-frame-background)
(cons 'mouse-color 1on1-help-frame-mouse+cursor-color)
(cons 'cursor-color 1on1-help-frame-mouse+cursor-color)
'(height . 40))))
(setq special-display-buffer-names
(remove-if (lambda (elt) (equal "*Help*" (car elt)))
special-display-buffer-names)))
;; *Completions* frame
;; If `1on1-minibuffer-frame-flag' is non-nil, then *Completions* frame must be treated
;; specially, so that it gets focus from the minibuffer frame. This is so, even if
;; `1on1-*Completions*-frame-flag' is nil.
(if 1on1-minibuffer-frame-flag
(if 1on1-*Completions*-frame-flag
(add-to-list
'special-display-buffer-names
`("*Completions*" 1on1-display-*Completions*-frame
((background-color ,@1on1-completions-frame-background)
(mouse-color ,@1on1-completions-frame-mouse+cursor-color)
(cursor-color ,@1on1-completions-frame-mouse+cursor-color)
,@(and 1on1-completions-frame-width
`((width ,@1on1-completions-frame-width))))))
(add-to-list 'special-display-buffer-names
`("*Completions*" 1on1-display-*Completions*-frame)))
(setq special-display-buffer-names
(remove-if (lambda (elt) (equal "*Completions*" (car elt)))
special-display-buffer-names)))
;; Minibuffer frame
(when 1on1-minibuffer-frame-flag
;; `display-buffer' (& `*-other-window' fns) will use separate frames.
(setq pop-up-frames t
pop-up-frame-alist (append default-frame-alist pop-up-frame-alist))
;; Set up `1on1-minibuffer-frame'.
(setq minibuffer-frame-alist (append 1on1-minibuffer-frame-alist
minibuffer-frame-alist))
(if 1on1-minibuffer-frame
(modify-frame-parameters 1on1-minibuffer-frame 1on1-minibuffer-frame-alist)
(setq 1on1-minibuffer-frame
(let ((after-make-frame-functions nil)) ; E.g. inhibit `fit-frame'.
(make-frame 1on1-minibuffer-frame-alist))))
;; Resize and reposition it. If variable `1on1-minibuffer-frame-width'
;; or `1on1-minibuffer-frame-top/bottom' is nil, calculate automatically.
(1on1-set-minibuffer-frame-width)
(1on1-set-minibuffer-frame-top/bottom)
;; Rename minibuffer frame. (`rename-frame' is defined in `frame-cmds.el'.)
(when (fboundp 'rename-frame)
(rename-frame 1on1-minibuffer-frame "Emacs minibuffer \
show/hide: hold CTRL + click in window"))
(setq minibuffer-auto-raise t)
;; Background colors of minibuffer frame: 3 states
(add-hook 'isearch-mode-hook '1on1-color-isearch-minibuffer-frame)
(add-hook 'isearch-mode-end-hook '1on1-color-minibuffer-frame-on-exit)
(add-hook 'minibuffer-setup-hook '1on1-color-minibuffer-frame-on-setup)
(add-hook 'minibuffer-exit-hook '1on1-color-minibuffer-frame-on-exit)
;; Redefine built-in fns so they color minibuffer frame.
(1on1-setup-minibuffer-frame-coloring))
;; Hooks.
(if 1on1-change-cursor-on-overwrite/read-only-flag
(add-hook 'post-command-hook '1on1-change-cursor-on-overwrite/read-only)
(1on1-set-cursor-type 1on1-default-frame-cursor-type)
(remove-hook 'post-command-hook '1on1-change-cursor-on-overwrite/read-only))
(if 1on1-change-cursor-on-input-method-flag
(add-hook 'post-command-hook '1on1-change-cursor-on-input-method)
(setq current-input-method nil)
(1on1-change-cursor-on-input-method)
(remove-hook 'post-command-hook '1on1-change-cursor-on-input-method))
(add-hook 'minibuffer-exit-hook '1on1-reset-minibuffer-frame)
(setq w32-grab-focus-on-raise nil
win32-grab-focus-on-raise nil) ; older name
(1on1-setup-mode-line))
;; This is inspired by code from Juri Linkov <juri@jurta.org>.
(defun 1on1-change-cursor-on-input-method ()
"Set cursor type depending on whether an input method is used or not."
(when 1on1-change-cursor-on-input-method-flag
(set-cursor-color
(if current-input-method
1on1-default-frame-cursor-color-input-method
(let ((bufname (buffer-name (current-buffer))))
(cond
((string= "*Help*" bufname) 1on1-help-frame-mouse+cursor-color)
((string= "*Completions*" bufname) 1on1-completions-frame-mouse+cursor-color)
((eq 1on1-minibuffer-frame (selected-frame))
1on1-minibuffer-frame-cursor-color)
((special-display-p bufname) 1on1-default-special-frame-cursor-color)
(t 1on1-default-frame-cursor-color)))))))
;; This is from Juri Linkov <juri@jurta.org>, with read-only added.
(defun 1on1-change-cursor-on-overwrite/read-only ()
"Set cursor type differently for overwrite mode and read-only buffer.
That is, use one cursor type for overwrite mode and read-only buffers,
and another cursor type otherwise."
(1on1-set-cursor-type (if (or buffer-read-only overwrite-mode)
1on1-default-frame-cursor-type-overwrite/read-only
1on1-default-frame-cursor-type)))
(unless (fboundp 'set-cursor-type) (defalias 'set-cursor-type '1on1-set-cursor-type))
;; This is essentially from Juri Linkov <juri@jurta.org>.
(defun 1on1-set-cursor-type (cursor-type)
"Set the cursor type of the selected frame to CURSOR-TYPE.
When called interactively, prompt for the type to use.
To get the frame's current cursor type, use `frame-parameters'."
(interactive
(list (intern (completing-read "Cursor type: "
(mapcar 'list '("box" "hollow" "bar" "hbar" nil))))))
(modify-frame-parameters (selected-frame) (list (cons 'cursor-type cursor-type))))
(defun 1on1-box-cursor-when-idle ()
"Change the cursor to a box cursor when Emacs is idle."
(let ((type (cdr (assoc 'cursor-type (frame-parameters)))))
(unless (eq type 'box)
(setq 1on1-last-cursor-type type)
(1on1-set-cursor-type 'box))))
(defun 1on1-box-cursor-when-idle-off ()
"Turn off changing the cursor to a box cursor when Emacs is idle."
(when 1on1-last-cursor-type (1on1-set-cursor-type 1on1-last-cursor-type)))
(defalias 'toggle-box-cursor-when-idle '1on1-toggle-box-cursor-when-idle)
(defun 1on1-toggle-box-cursor-when-idle (&optional arg)
"Turn on or off automatically changing to a box cursor when idle.
When on, the cursor is changed to a box whenever Emacs is idle.
With prefix argument, turn on if ARG > 0; else turn off."
(interactive "P")
(setq 1on1-box-cursor-when-idle-p
(if arg (> (prefix-numeric-value arg) 0) (not 1on1-box-cursor-when-idle-p)))
(cond (1on1-box-cursor-when-idle-p
(timer-activate-when-idle 1on1-box-cursor-when-idle-timer)
(add-hook 'pre-command-hook '1on1-box-cursor-when-idle-off)
(message "Turned ON making cursor a box when Emacs is idle."))
(t
(cancel-timer 1on1-box-cursor-when-idle-timer)
(remove-hook 'pre-command-hook '1on1-box-cursor-when-idle-off)
(message "Turned OFF making cursor a box when Emacs is idle."))))
(defun 1on1-set-box-cursor-when-idle-interval (secs)
"Set wait until automatically change to a box cursor when Emacs is idle.
Whenever Emacs is idle for this many seconds it will change the cursor
to a box.
To turn on or off automatically changing to a box cursor when idle,
use `\\[toggle-box-cursor-when-idle]."
(interactive
"nSeconds to idle, before changing to a box cursor: ")
(timer-set-idle-time 1on1-box-cursor-when-idle-timer
(setq 1on1-box-cursor-when-idle-interval secs)
t))
(defun 1on1-display-*Help*-frame (buf &optional args)
"Display *Help* buffer in its own frame.
`special-display-function' is used to do the actual displaying.
BUF and ARGS are the arguments to `special-display-function'."
(let ((old-ptr-shape x-pointer-shape)
return-window)
(when (boundp 'x-pointer-xterm)
(setq x-pointer-shape x-pointer-xterm))
(setq return-window (select-window (funcall special-display-function buf args)))
(raise-frame)
(setq x-pointer-shape old-ptr-shape)
return-window))
(defun 1on1-display-*Completions*-frame (buf &optional args)
"Display *Completions* buffer in its own frame.
`special-display-function' is used to do the actual displaying.
Completion input events are redirected to `1on1-minibuffer-frame'.
BUF and ARGS are the arguments to `special-display-function'."
(let ((old-ptr-shape x-pointer-shape)
return-window)
(when (and 1on1-*Completions*-frame-flag (boundp 'x-pointer-box-spiral))
(setq x-pointer-shape x-pointer-box-spiral))
(setq return-window (select-window (funcall special-display-function buf args)))
(when (fboundp 'zoom-frm-out)
(condition-case nil (progn (zoom-frm-out) (zoom-frm-out)) ; In `zoom-frm.el'.
(error nil)))
;; We reposition frame this way, instead of binding `special-display-frame-alist'
;; with this value, because `after-make-frame-functions' might resize frame.
(when 1on1-*Completions*-frame-at-right-flag
(modify-frame-parameters
(selected-frame) ; Hard-code 7 here - what does it depend on?
`((left . ,(- (x-display-pixel-width) (+ (frame-pixel-width) 7))))))
(raise-frame)
(when (boundp '1on1-minibuffer-frame)
(redirect-frame-focus (selected-frame) 1on1-minibuffer-frame))
(when (and 1on1-*Completions*-frame-flag (boundp 'x-pointer-box-spiral))
(setq x-pointer-shape old-ptr-shape))
return-window))
(defun 1on1-set-minibuffer-frame-top/bottom ()
"Set position of minibuffer frame.
Use `1on1-minibuffer-frame-top/bottom' if non-nil.
Else, place minibuffer at bottom of display."
(when (boundp '1on1-minibuffer-frame)
(modify-frame-parameters
1on1-minibuffer-frame
`((top ,@ (or 1on1-minibuffer-frame-top/bottom
(- (* 2 (frame-char-height 1on1-minibuffer-frame)))))))))
(defun 1on1-set-minibuffer-frame-width ()
"Set width of minibuffer frame, in characters.
Use `1on1-minibuffer-frame-width' if not nil.
Else, set width relative to character size of `1on1-minibuffer-frame'
and display size, and depending on
`1on1-minibuffer-frame-width-percent':
(/ (* 1on1-minibuffer-frame-width-percent (x-display-pixel-width))
(* 100 (frame-char-width 1on1-minibuffer-frame)))"
(when (boundp '1on1-minibuffer-frame)
(set-frame-width
1on1-minibuffer-frame
(or 1on1-minibuffer-frame-width
(/ (* 1on1-minibuffer-frame-width-percent (x-display-pixel-width))
(* 100 (frame-char-width 1on1-minibuffer-frame)))))))
(defun 1on1-color-minibuffer-frame-on-setup ()
"Change background of minibuffer frame to reflect the minibuffer depth.
Use this when increasing the minibuffer recursion depth."
(when (boundp '1on1-minibuffer-frame)
(save-window-excursion
(select-frame 1on1-minibuffer-frame)
(set-background-color 1on1-active-minibuffer-frame-background)
(let ((count (minibuffer-depth)))
(while (> count 1)
(set-background-color (1on1-increment-color-hue ; Change bg hue slightly.
(frame-parameter nil 'background-color)
1on1-color-minibuffer-frame-on-setup-increment))
(setq count (1- count)))))))
(defun 1on1-color-minibuffer-frame-on-exit ()
"Change background of minibuffer frame to reflect the minibuffer depth.
Use this when reducing the minibuffer recursion depth."
(when (boundp '1on1-minibuffer-frame)
(save-window-excursion
(select-frame 1on1-minibuffer-frame)
(if (< (minibuffer-depth) 2)
(set-background-color 1on1-inactive-minibuffer-frame-background)
(set-background-color (1on1-increment-color-hue ; Change bg hue slightly.
(frame-parameter nil 'background-color)
1on1-color-minibuffer-frame-on-exit-increment))))))
;; This is essentially a version of `doremi-increment-color-component' for hue only.
(defun 1on1-increment-color-hue (color increment)
"Increase hue component of COLOR by INCREMENT."
(unless (string-match "#" color) ; Convert color name to #hhh...
(setq color (hexrgb-color-values-to-hex (x-color-values color))))
;; Convert RGB to HSV
(let* ((rgb (x-color-values color))
(red (/ (float (nth 0 rgb)) 65535.0)) ; Convert from 0-65535 to 0.0-1.0
(green (/ (float (nth 1 rgb)) 65535.0))
(blue (/ (float (nth 2 rgb)) 65535.0))
(hsv (hexrgb-rgb-to-hsv red green blue))
(hue (nth 0 hsv))
(saturation (nth 1 hsv))
(value (nth 2 hsv)))
(setq hue (+ hue (/ increment 100.0)))
(when (> hue 1.0) (setq hue (1- hue)))
(hexrgb-color-values-to-hex (mapcar (lambda (x) (floor (* x 65535.0)))
(hexrgb-hsv-to-rgb hue saturation value)))))
(defun 1on1-color-isearch-minibuffer-frame ()
"Use `1on1-isearch-minibuffer-frame-background' for minibuffer."
(and (boundp '1on1-minibuffer-frame)
(save-window-excursion
(select-frame 1on1-minibuffer-frame)
(set-background-color
;; Can also try `x-defined-colors', defined in `x-win.el'.
;; It contains all colors currently supported by X windows.
(if (x-color-defined-p 1on1-isearch-minibuffer-frame-background)
1on1-isearch-minibuffer-frame-background
"white")))))
(defun 1on1-flash-ding-minibuffer-frame (&optional do-not-terminate)
"Ring bell (`ding'), after flashing minibuffer frame, if relevant.
Terminates any keyboard macro executing, unless arg DO-NOT-TERMINATE non-nil."
(flash-ding do-not-terminate (and (boundp '1on1-minibuffer-frame)
1on1-minibuffer-frame)))
(defun 1on1-setup-minibuffer-frame-coloring ()
"Redefine some built-in functions so they color the minibuffer frame.
Functions redefined: `y-or-n-p', `top-level', `abort-recursive-exit'."
(or (fboundp 'old-y-or-n-p)
(fset 'old-y-or-n-p (symbol-function 'y-or-n-p)))
;; REPLACES ORIGINAL (built-in function):
;; Temporarily colors minibuffer frame to "active" color.
;;
(defun y-or-n-p (prompt)
"Ask user a \"y or n\" question. Return t if answer is \"y\".
Takes one argument, which is the string to display to ask the question.
It should end in a space; `y-or-n-p' adds `(y or n) ' to it.
No confirmation of answer is requested; a single character is enough.
Also accepts SPC to mean yes, or DEL to mean no."
(1on1-color-minibuffer-frame-on-setup)
(prog1 (old-y-or-n-p prompt) (1on1-color-minibuffer-frame-on-exit)))
(or (fboundp 'old-top-level)
(fset 'old-top-level (symbol-function 'top-level)))
;; REPLACES ORIGINAL (built-in function):
;; Resets color of minibuffer frame to "inactive" color.
;;
(defun top-level ()
"Exit all recursive editing levels."
(interactive)
(1on1-color-minibuffer-frame-on-exit)
(old-top-level))
(or (fboundp 'old-abort-recursive-edit)
(fset 'old-abort-recursive-edit (symbol-function 'abort-recursive-edit)))
;; REPLACES ORIGINAL (built-in function):
;; Resets color of minibuffer frame to "inactive" color.
;;
(defun abort-recursive-edit ()
"Abort command that requested this recursive edit or minibuffer input."
(interactive)
(1on1-color-minibuffer-frame-on-exit)
(old-abort-recursive-edit)))
(defun 1on1-setup-mode-line ()
"Set up mode-line faces."
(when 1on1-color-mode-line-flag
(set-face-background 'modeline 1on1-active-mode-line-background)
(when (facep 'mode-line-inactive) ; Emacs 22
(set-face-background 'mode-line-inactive 1on1-inactive-mode-line-background))))
(defun 1on1-reset-minibuffer-frame ()
(when 1on1-minibuffer-frame
(set-frame-size 1on1-minibuffer-frame
(frame-width 1on1-minibuffer-frame)
1on1-minibuffer-frame-height)
(1on1-set-minibuffer-frame-top/bottom)))
;; Bind this to some key in the minibuffer completion maps. I use `C-o'.
;;;###autoload
(defun 1on1-fit-minibuffer-frame ()
"Fit the standalone minibuffer frame height to its contents.
Repeat to increase the height by 1.
Bind this in minibuffer keymaps to a key such as `C-o' that you can
use during minibuffer input."
(interactive)
(unless (require 'fit-frame nil t)
(error "You need to load library `fit-frame.el' to use this command"))
;; We could assume the minibuffer frame is `1on1-minibuffer-frame', but we don't.
(when (and (active-minibuffer-window)
(save-selected-window
(select-window (minibuffer-window))
;; We should be able to use just (one-window-p),
;; but an Emacs bug means we need this:
(one-window-p nil 'selected-frame)))
(let* ((frame (save-selected-window
(select-window (minibuffer-window)) (selected-frame)))
(frame-height (frame-height frame)))
(cond ((eq last-command this-command)
(set-frame-height frame (1+ (frame-height frame)))
(1on1-set-minibuffer-frame-top/bottom)
(condition-case nil
(scroll-down (frame-height frame))
(error nil)))
(t
(let* ((beg (1on1-minibuffer-prompt-end))
(frame-width (frame-width frame))
(fit-frame-min-width frame-width)
(window-min-width frame-width)
(fit-frame-max-width frame-width)
(fit-frame-empty-width frame-width)
(fit-frame-empty-special-display-width frame-width)
(fit-frame-min-height frame-height)
(window-min-height frame-height)
(fit-frame-empty-height frame-height)
(fit-frame-empty-special-display-height frame-height))
(fit-frame frame)
(when (>= emacs-major-version 21)
(set-frame-height frame (1+ (frame-height frame)))) ; A little extra.
(1on1-set-minibuffer-frame-top/bottom)
(condition-case nil (scroll-down (frame-height frame)) (error nil))))))))
(defun 1on1-minibuffer-prompt-end ()
"Version of `minibuffer-prompt-end' that works for Emacs 20 and later."
(if (fboundp 'minibuffer-prompt-end) (minibuffer-prompt-end) (point-min)))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; oneonone.el ends here
[-- Attachment #3: hexrgb.el --]
[-- Type: application/octet-stream, Size: 26932 bytes --]
;;; hexrgb.el --- Functions to manipulate colors, including RGB hex strings.
;;
;; Filename: hexrgb.el
;; Description: Functions to manipulate colors, including RGB hex strings.
;; Author: Drew Adams
;; Maintainer: Drew Adams
;; Copyright (C) 2004-2008, Drew Adams, all rights reserved.
;; Created: Mon Sep 20 22:58:45 2004
;; Version: 21.0
;; Last-Updated: Tue Jan 01 13:37:31 2008 (-28800 Pacific Standard Time)
;; By: dradams
;; Update #: 540
;; URL: http://www.emacswiki.org/cgi-bin/wiki/hexrgb.el
;; Keywords: number, hex, rgb, color, background, frames, display
;; Compatibility: GNU Emacs 20.x, GNU Emacs 21.x, GNU Emacs 22.x
;;
;; Features that might be required by this library:
;;
;; None
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Commentary:
;;
;; Functions to manipulate colors, including RGB hex strings.
;;
;; This library provides functions for converting between RGB (red,
;; green, blue) color components and HSV (hue, saturation, value)
;; color components. It helps you convert among Emacs color values
;; (whole numbers from 0 through 65535), RGB and HSV floating-point
;; components (0.0 through 1.0), Emacs color-name strings (such as
;; "blue"), and hex RGB color strings (such as "#FC43A7912").
;;
;; An RGB hex string, such as used as a frame `background-color'
;; property, is a string of 1 + (3 * n) characters, the first of
;; which is "#". The other characters are hexadecimal digits, in
;; three groups representing (from the left): red, green, and blue
;; hex codes.
;;
;; Constants defined here:
;;
;; `hexrgb-defined-colors', `hexrgb-defined-colors-alist'.
;;
;; Commands defined here:
;;
;; `hexrgb-blue', `hexrgb-complement', `hexrgb-green',
;; `hexrgb-hue', `hexrgb-read-color', `hexrgb-red',
;; `hexrgb-saturation', `hexrgb-value'.
;;
;; Non-interactive functions defined here:
;;
;; `hexrgb-approx-equal', `hexrgb-color-name-to-hex',
;; `hexrgb-color-values-to-hex', `hexrgb-color-value-to-float',
;; `hexrgb-float-to-color-value', `hexrgb-hex-char-to-integer',
;; `hexrgb-hex-to-color-values', `hexrgb-hex-to-hsv',
;; `hexrgb-hex-to-rgb', `hexrgb-hsv-to-hex', `hexrgb-hex-to-int',
;; `hexrgb-hsv-to-rgb', `hexrgb-increment-blue',
;; `hexrgb-increment-equal-rgb', `hexrgb-increment-green',
;; `hexrgb-increment-hex', `hexrgb-increment-red',
;; `hexrgb-int-to-hex', `hexrgb-rgb-hex-string-p',
;; `hexrgb-rgb-to-hex', `hexrgb-rgb-to-hsv'.
;;
;;
;; Add this to your initialization file (~/.emacs or ~/_emacs):
;;
;; (require 'hexrgb)
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Change log:
;;
;; 2007/12/30 dadams
;; Added: hexrgb-hex-to-color-values.
;; 2007/10/20 dadams
;; hexrgb-read-color: Treat pseudo colors too (e.g. *point foreground*).
;; 2007/01/21 dadams
;; hexrgb-read-color: Error if empty string (and not allow-empty-name-p).
;; 2006/06/06 dadams
;; Added: hexrgb-defined-colors(-alist). Use instead of (x-defined-colors).
;; hexrgb-(red|green|blue): Added interactive specs.
;; 2006/06/04 dadams
;; hexrgb-read-color: Added optional arg allow-empty-name-p.
;; 2006/06/02 dadams
;; Added: hexrgb-rgb-hex-string-p. Used it.
;; 2006/05/30 dadams
;; Added: hexrgb-hex-to-(hsv|rgb), hexrgb-hsv-to-hex, hexrgb-color-name-to-hex,
;; hexrgb-complement, hexrgb-read-color, hexrgb-hue, hexrgb-saturation,
;; hexrgb-value, hexrgb-red, hexrgb-blue, hexrgb-green.
;; approx-equal: Add optional fuzz factor arguments. Changed the algorithm.
;; Renamed: approx-equal to hexrgb-approx-equal.
;; hexrgb-rgb-to-hsv: Changed test from < to <=: (when (<= hue 0.0)...).
;; hexrgb-hsv-to-rgb: Treat hue = 0.0 (int 0) the same as hue = 1.0 (int 6).
;; hexrgb-rgb-to-hex, hexrgb-increment-hex: Corrected doc strings.
;; 2006/05/22 dadams
;; Added: hexrgb-hsv-to-hex, hexrgb-rgb-to-hex. Require cl.el when byte-compile.
;; 2005/08/09 dadams
;; hexrgb-rgb-to-hsv: Side-stepped Emacs-20 bug in comparing NaN.
;; hexrgb-increment-*: Added optional arg wrap-p.
;; hexrgb-increment-hex: Prevent wrap if not wrap-p.
;; 2005/08/02 dadams
;; hexrgb-rgb-to-hes: Bug fix: If delta is zero, then so are hue and saturation.
;; 2005/06/24 dadams
;; hexrgb-rgb-to-hsv: Bug fix: test for NaN (e.g. on divide by zero).
;; 2005/02/08 dadams
;; hexrgb-hsv-to-rgb: Bug fix (typo: p, q -> pp, qq; added ww).
;; 2005/01/09 dadams
;; hexrgb-int-to-hex: Fixed bug in hexrgb-int-to-hex: nb-digits not respected.
;; Added: hexrgb-hsv-to-rgb, hexrgb-rgb-to-hsv, approx-equal.
;; Renamed old hexrgb-increment-value to hexrgb-increment-equal-rgb.
;; 2005/01/05 dadams
;; hexrgb-int-to-hex: Used a suggestion from Juri Linkov.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; This program is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.
;; This program is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
;; along with this program; see the file COPYING. If not, write to
;; the Free Software Foundation, Inc., 51 Franklin Street, Fifth
;; Floor, Boston, MA 02110-1301, USA.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Code:
(eval-when-compile (require 'cl)) ;; case; plus, for Emacs < 20: when, unless
;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Not used here, but put here to be available to libraries that use `hexrgb.el'.
;;;###autoload
(defconst hexrgb-defined-colors (eval-when-compile (x-defined-colors))
"List of all supported colors.")
;;;###autoload
(defconst hexrgb-defined-colors-alist (eval-when-compile (mapcar #'list (x-defined-colors)))
"Alist of all supported colors, for use in completion.")
;;;###autoload
(defun hexrgb-read-color (&optional convert-to-RGB-p allow-empty-name-p prompt)
"Read a color name or RGB hex value: #RRRRGGGGBBBB.
Completion is available for color names, but not for RGB hex strings.
If you input an RGB hex string, it must have the form #XXXXXXXXXXXX or
XXXXXXXXXXXX, where each X is a hex digit. The number of Xs must be a
multiple of 3, with the same number of Xs for each of red, green, and
blue. The order is red, green, blue.
In addition to standard color names and RGB hex values, the following
are available as color candidates. In each case, the corresponding
color is used.
* `*copied foreground*' - last copied foreground, if available
* `*copied background*' - last copied background, if available
* `*mouse-2 foreground*' - foreground where you click `mouse-2'
* `*mouse-2 background*' - background where you click `mouse-2'
* `*point foreground*' - foreground under the cursor
* `*point background*' - background under the cursor
\(You can copy a color using eyedropper commands such as
`eyedrop-pick-foreground-at-mouse'.)
Checks input to be sure it represents a valid color. If not, raises
an error (but see exception for empty input with non-nil
ALLOW-EMPTY-NAME-P).
Interactively, or with optional arg CONVERT-TO-RGB-P non-nil, converts
an input color name to an RGB hex string. Returns the RGB hex string.
Optional arg ALLOW-EMPTY-NAME-P controls what happens if you enter an
empty color name (that is, you just hit `RET'). If non-nil, then
`hexrgb-read-color' returns an empty color name, \"\". If nil, then
it raises an error. Programs must test for \"\" if ALLOW-EMPTY-NAME-P
is non-nil. They can then perform an appropriate action in case of
empty input.
Optional arg PROMPT is the prompt. Nil means use a default prompt."
(interactive "p") ; Always convert to RGB interactively.
(let* ((completion-ignore-case t)
(colors (if (fboundp 'eyedrop-foreground-at-point)
(append (and eyedrop-picked-foreground '(("*copied foreground*")))
(and eyedrop-picked-background '(("*copied background*")))
'(("*mouse-2 foreground*") ("*mouse-2 background*")
("*point foreground*") ("*point background*"))
hexrgb-defined-colors-alist)
hexrgb-defined-colors-alist))
(color (completing-read (or prompt "Color (name or #R+G+B+): ") colors))
hex-string)
(when (fboundp 'eyedrop-foreground-at-point)
(cond ((string= "*copied foreground*" color) (setq color eyedrop-picked-foreground))
((string= "*copied background*" color) (setq color eyedrop-picked-background))
((string= "*point foreground*" color) (setq color (eyedrop-foreground-at-point)))
((string= "*point background*" color) (setq color (eyedrop-background-at-point)))
((string= "*mouse-2 foreground*" color)
(setq color (prog1 (eyedrop-foreground-at-mouse
(read-event "Click `mouse-2' to choose foreground color - "))
(read-event)))) ; Discard mouse up event.
((string= "*mouse-2 background*" color)
(setq color (prog1 (eyedrop-background-at-mouse
(read-event "Click `mouse-2' to choose background color - "))
(read-event)))))) ; Discard mouse up event.
(setq hex-string (or (string-match "^#\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+$" color)
(and (string-match "^\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+$" color)
t)))
(if (and allow-empty-name-p (string= "" color))
""
(when (and hex-string (not (eq 0 hex-string)))
(setq color (concat "#" color))) ; No #; add it.
(unless hex-string
(when (or (string= "" color)
(not (if (fboundp 'test-completion) ; Not defined in Emacs 20.
(test-completion color colors)
(try-completion color colors))))
(error "No such color: %S" color))
(when convert-to-RGB-p (setq color (hexrgb-color-name-to-hex color))))
(when (interactive-p) (message "Color: `%s'" color))
color)))
;;;###autoload
(defun hexrgb-rgb-hex-string-p (color &optional laxp)
"Non-nil if COLOR is an RGB string #XXXXXXXXXXXX.
Each X is a hex digit. The number of Xs must be a multiple of 3, with
the same number of Xs for each of red, green, and blue.
Non-nil optional arg LAXP means that the initial `#' is optional. In
that case, for a valid string of hex digits: when # is present 0 is
returned; otherwise, t is returned."
(or (string-match "^#\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+$" color)
(and laxp (string-match "^\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+$" color) t)))
;;;###autoload
(defun hexrgb-complement (color)
"Return the color that is the complement of COLOR."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(let ((red (hexrgb-red color))
(green (hexrgb-green color))
(blue (hexrgb-blue color)))
(setq color (hexrgb-rgb-to-hex (- 1.0 red) (- 1.0 green) (- 1.0 blue))))
(when (interactive-p) (message "Complement: `%s'" color))
color)
;;;###autoload
(defun hexrgb-hue (color)
"Return the hue component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(car (hexrgb-rgb-to-hsv (hexrgb-red color) (hexrgb-green color) (hexrgb-blue color))))
;;;###autoload
(defun hexrgb-saturation (color)
"Return the saturation component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(cadr (hexrgb-rgb-to-hsv (hexrgb-red color) (hexrgb-green color) (hexrgb-blue color))))
;;;###autoload
(defun hexrgb-value (color)
"Return the value component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(caddr (hexrgb-rgb-to-hsv (hexrgb-red color) (hexrgb-green color) (hexrgb-blue color))))
;;;###autoload
(defun hexrgb-red (color)
"Return the red component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(/ (hexrgb-hex-to-int (substring color 1 (1+ (/ (1- (length color)) 3))))
(expt 16.0 (/ (1- (length color)) 3.0))))
;;;###autoload
(defun hexrgb-green (color)
"Return the green component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(let* ((len (/ (1- (length color)) 3))
(start (1+ len)))
(/ (hexrgb-hex-to-int (substring color start (+ start len)))
(expt 16.0 (/ (1- (length color)) 3.0)))))
;;;###autoload
(defun hexrgb-blue (color)
"Return the blue component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(let* ((len (/ (1- (length color)) 3))
(start (+ 1 len len)))
(/ (hexrgb-hex-to-int (substring color start (+ start len)))
(expt 16.0 (/ (1- (length color)) 3.0)))))
;;;###autoload
(defun hexrgb-rgb-to-hsv (red green blue)
"Convert RED, GREEN, BLUE components to HSV (hue, saturation, value).
Each input component is 0.0 to 1.0, inclusive.
Returns a list of HSV components of value 0.0 to 1.0, inclusive."
(let* ((min (min red green blue))
(max (max red green blue))
(value max)
(delta (- max min))
hue saturation)
(if (hexrgb-approx-equal 0.0 delta)
(setq hue 0.0 saturation 0.0) ; Gray scale - no color; only value.
(if (and (condition-case nil
(setq saturation (/ delta max))
(arith-error nil))
(or (< emacs-major-version 21) ; Emacs 20 bug makes next test fail falsely.
(not (equal 0.0e+NaN saturation)))) ; Must be a number, not NaN.
(if (hexrgb-approx-equal 0.0 saturation)
(setq hue 0.0 saturation 0.0) ; Again, no color; only value.
;; Color
(if (hexrgb-approx-equal red max)
(setq hue (/ (- green blue) delta)) ; Between yellow & magenta.
(if (hexrgb-approx-equal green max)
(setq hue (+ 2.0 (/ (- blue red) delta))) ; Between cyan & yellow.
(setq hue (+ 4.0 (/ (- red green) delta))))) ; Between magenta & cyan.
(setq hue (/ hue 6.0))
(when (<= hue 0.0)(setq hue (+ hue 1.0))))
(setq saturation 0.0 hue 0.0))) ; Div by zero (max=0): H:=0, S:=0. (Hue undefined.)
(list hue saturation value)))
;;;###autoload
(defun hexrgb-hsv-to-rgb (hue saturation value)
"Convert HUE, SATURATION, VALUE components to RGB (red, green, blue).
Each input component is 0.0 to 1.0, inclusive.
Returns a list of RGB components of value 0.0 to 1.0, inclusive."
(let (red green blue int-hue fract pp qq tt ww)
(if (hexrgb-approx-equal 0.0 saturation)
(setq red value green value blue value) ; Gray
(setq hue (* hue 6.0) ; Sectors: 0 to 5
int-hue (floor hue)
fract (- hue int-hue)
pp (* value (- 1 saturation))
qq (* value (- 1 (* saturation fract)))
ww (* value (- 1 (* saturation (- 1 (- hue int-hue))))))
(case int-hue
((0 6) (setq red value green ww blue pp))
(1 (setq red qq green value blue pp))
(2 (setq red pp green value blue ww))
(3 (setq red pp green qq blue value))
(4 (setq red ww green pp blue value))
(otherwise (setq red value green pp blue qq))))
(list red green blue)))
;;;###autoload
(defun hexrgb-hsv-to-hex (hue saturation value)
"Return the hex RBG color string for inputs HUE, SATURATION, VALUE.
The inputs are each in the range 0 to 1.
The output string is of the form \"#RRRRGGGGBBBB\"."
(hexrgb-color-values-to-hex
(mapcar (lambda (x) (floor (* x 65535.0))) (hexrgb-hsv-to-rgb hue saturation value))))
;;;###autoload
(defun hexrgb-rgb-to-hex (red green blue)
"Return the hex RBG color string for inputs RED, GREEN, BLUE.
The inputs are each in the range 0 to 1.
The output string is of the form \"#RRRRGGGGBBBB\"."
(hexrgb-color-values-to-hex
(mapcar (lambda (x) (floor (* x 65535.0))) (list red green blue))))
;;;###autoload
(defun hexrgb-hex-to-hsv (color)
"Return a list of HSV (hue, saturation, value) color components.
Each component is a value from 0.0 to 1.0, inclusive.
COLOR is a color name or a hex RGB string that starts with \"#\" and
is followed by an equal number of hex digits for red, green, and blue
components."
(let ((rgb-components (hexrgb-hex-to-rgb color)))
(apply #'hexrgb-rgb-to-hsv rgb-components)))
;;;###autoload
(defun hexrgb-hex-to-rgb (color)
"Return a list of RGB (red, green, blue) color components.
Each component is a value from 0.0 to 1.0, inclusive.
COLOR is a color name or a hex RGB string that starts with \"#\" and
is followed by an equal number of hex digits for red, green, and blue
components."
(unless (hexrgb-rgb-hex-string-p color) (setq color (hexrgb-color-name-to-hex color)))
(let ((len (/ (1- (length color)) 3)))
(list (/ (hexrgb-hex-to-int (substring color 1 (1+ len))) 65535.0)
(/ (hexrgb-hex-to-int (substring color (1+ len) (+ 1 len len))) 65535.0)
(/ (hexrgb-hex-to-int (substring color (+ 1 len len))) 65535.0))))
;;;###autoload
(defun hexrgb-color-name-to-hex (color)
"Return the RGB hex string for the COLOR name, starting with \"#\".
If COLOR is already a string starting with \"#\", then just return it."
(let ((components (x-color-values color)))
(unless components (error "No such color: %S" color))
(unless (hexrgb-rgb-hex-string-p color)
(setq color (hexrgb-color-values-to-hex components))))
color)
;; Just hard-code 4 as the number of hex digits, since `x-color-values'
;; seems to produce appropriate integer values for this value.
;;
;; Color "components" would be better in the name than color "value"
;; but this name follows the Emacs tradition (e.g. `x-color-values',
;; 'ps-color-values', `ps-e-x-color-values').
;;;###autoload
(defun hexrgb-color-values-to-hex (values)
"Convert list of rgb color VALUES to a hex string, #XXXXXXXXXXXX.
Each X in the string is a hexadecimal digit.
Input VALUES is as for the output of `x-color-values'."
(concat "#"
(hexrgb-int-to-hex (nth 0 values) 4) ; red
(hexrgb-int-to-hex (nth 1 values) 4) ; green
(hexrgb-int-to-hex (nth 2 values) 4))) ; blue
;;;###autoload
(defun hexrgb-hex-to-color-values (color)
"Convert hex COLOR to a list of rgb color values.
COLOR is a hex rgb color string, #XXXXXXXXXXXX
Each X in the string is a hexadecimal digit. There are 3N X's, N > 0.
The output list is as for `x-color-values'."
(let* ((hex-strgp (string-match
"^\\(#\\)?\\(\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+\\)$"
color))
(ndigits (/ (if (eq (match-beginning 1) (match-end 1))
(length color)
(1- (length color)))
3))
red green blue)
(unless hex-strgp (error "Invalid RGB color string: %s" color))
(setq color (substring color (match-beginning 2) (match-end 2))
red (hexrgb-hex-to-int (substring color 0 ndigits))
green (hexrgb-hex-to-int (substring color ndigits (* 2 ndigits)))
blue (hexrgb-hex-to-int (substring color ndigits (* 3 ndigits))))
(list red green blue)))
;;;###autoload
(defun hexrgb-increment-red (hex nb-digits increment &optional wrap-p)
"Increment red value of rgb string HEX by INCREMENT.
String HEX starts with \"#\". Each color is NB-DIGITS hex digits long.
If optional arg WRAP-P is non-nil, then the result wraps around zero.
For example, incrementing \"#FFFFFFFFF\" by 1 will cause it to wrap
around to \"#000000000\"."
(concat "#"
(hexrgb-increment-hex (substring hex 1 (1+ nb-digits)) increment nb-digits wrap-p)
(substring hex (1+ nb-digits) (1+ (* nb-digits 2)))
(substring hex (1+ (* nb-digits 2)))))
;;;###autoload
(defun hexrgb-increment-green (hex nb-digits increment &optional wrap-p)
"Increment green value of rgb string HEX by INCREMENT.
String HEX starts with \"#\". Each color is NB-DIGITS hex digits long.
For example, incrementing \"#FFFFFFFFF\" by 1 will cause it to wrap
around to \"#000000000\"."
(concat
"#" (substring hex 1 (1+ nb-digits))
(hexrgb-increment-hex (substring hex (1+ nb-digits) (1+ (* nb-digits 2)))
increment
nb-digits
wrap-p)
(substring hex (1+ (* nb-digits 2)))))
;;;###autoload
(defun hexrgb-increment-blue (hex nb-digits increment &optional wrap-p)
"Increment blue value of rgb string HEX by INCREMENT.
String HEX starts with \"#\". Each color is NB-DIGITS hex digits long.
For example, incrementing \"#FFFFFFFFF\" by 1 will cause it to wrap
around to \"#000000000\"."
(concat "#" (substring hex 1 (1+ (* nb-digits 2)))
(hexrgb-increment-hex (substring hex (1+ (* nb-digits 2)))
increment
nb-digits
wrap-p)))
;;;###autoload
(defun hexrgb-increment-equal-rgb (hex nb-digits increment &optional wrap-p)
"Increment each color value (r,g,b) of rgb string HEX by INCREMENT.
String HEX starts with \"#\". Each color is NB-DIGITS hex digits long.
For example, incrementing \"#FFFFFFFFF\" by 1 will cause it to wrap
around to \"#000000000\"."
(concat
"#" (hexrgb-increment-hex (substring hex 1 (1+ nb-digits)) increment nb-digits wrap-p)
(hexrgb-increment-hex (substring hex (1+ nb-digits) (1+ (* nb-digits 2)))
increment
nb-digits
wrap-p)
(hexrgb-increment-hex (substring hex (1+ (* nb-digits 2))) increment nb-digits wrap-p)))
;;;###autoload
(defun hexrgb-increment-hex (hex increment nb-digits &optional wrap-p)
"Increment HEX number (a string NB-DIGITS long) by INCREMENT.
For example, incrementing \"FFFFFFFFF\" by 1 will cause it to wrap
around to \"000000000\"."
(let* ((int (hexrgb-hex-to-int hex))
(new-int (+ increment int)))
(if (or wrap-p
(and (>= int 0) ; Not too large for the machine.
(>= new-int 0) ; For the case where increment < 0.
(<= (length (format (concat "%X") new-int)) nb-digits))) ; Not too long.
(hexrgb-int-to-hex new-int nb-digits) ; Use incremented number.
hex))) ; Don't increment.
;;;###autoload
(defun hexrgb-hex-to-int (hex)
"Convert HEX string argument to an integer.
The characters of HEX must be hex characters."
(let* ((factor 1)
(len (length hex))
(indx (1- len))
(int 0))
(while (>= indx 0)
(setq int (+ int (* factor (hexrgb-hex-char-to-integer (aref hex indx)))))
(setq indx (1- indx))
(setq factor (* 16 factor)))
int))
;; From `hexl.el'. This is the same as `hexl-hex-char-to-integer' defined there.
;;;###autoload
(defun hexrgb-hex-char-to-integer (character)
"Take a CHARACTER and return its value as if it were a hex digit."
(if (and (>= character ?0) (<= character ?9))
(- character ?0)
(let ((ch (logior character 32)))
(if (and (>= ch ?a) (<= ch ?f))
(- ch (- ?a 10))
(error "Invalid hex digit `%c'" ch)))))
;; Originally, I used the code from `int-to-hex-string' in `float.el'.
;; This version is thanks to Juri Linkov <juri@jurta.org>.
;;
;;;###autoload
(defun hexrgb-int-to-hex (int &optional nb-digits)
"Convert integer argument INT to a #XXXXXXXXXXXX format hex string.
Each X in the output string is a hexadecimal digit.
NB-DIGITS is the number of hex digits. If INT is too large to be
represented with NB-DIGITS, then the result is truncated from the
left. So, for example, INT=256 and NB-DIGITS=2 returns \"00\", since
the hex equivalent of 256 decimal is 100, which is more than 2 digits."
(setq nb-digits (or nb-digits 4))
(substring (format (concat "%0" (int-to-string nb-digits) "X") int) (- nb-digits)))
;; Inspired by Elisp Info manual, node "Comparison of Numbers".
;;;###autoload
(defun hexrgb-approx-equal (x y &optional rfuzz afuzz)
"Return non-nil if numbers X and Y are approximately equal.
RFUZZ is a relative fuzz factor. AFUZZ is an absolute fuzz factor.
RFUZZ defaults to 1.0e-8. AFUZZ defaults to (/ RFUZZ 10).
The algorithm is:
(< (abs (- X Y)) (+ AFUZZ (* RFUZZ (+ (abs X) (abs Y)))))."
(setq rfuzz (or rfuzz 1.0e-8) afuzz (or afuzz (/ rfuzz 10)))
(< (abs (- x y)) (+ afuzz (* rfuzz (+ (abs x) (abs y))))))
;;;###autoload
(defun hexrgb-color-value-to-float (n)
"Return the floating-point equivalent of color value N.
N must be an integer between 0 and 65535, or else an error is raised."
(unless (and (wholenump n) (<= n 65535))
(error "Not a whole number less than 65536"))
(/ (float n) 65535.0))
;;;###autoload
(defun hexrgb-float-to-color-value (x)
"Return the color value equivalent of floating-point number X.
X must be between 0.0 and 1.0, or else an error is raised."
(unless (and (numberp x) (<= 0.0 x) (<= x 1.0))
(error "Not a floating-point number between 0.0 and 1.0"))
(floor (* x 65535.0)))
;;;;;;;;;;;;;;;;;;;;;;;;;;;
(provide 'hexrgb)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; hexrgb.el ends here
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-07-09 15:27 ` Drew Adams
@ 2008-08-02 20:36 ` Drew Adams
2008-08-02 21:07 ` Jason Rumney
0 siblings, 1 reply; 16+ messages in thread
From: Drew Adams @ 2008-08-02 20:36 UTC (permalink / raw)
To: 117
[-- Attachment #1: Type: text/plain, Size: 2338 bytes --]
Update for a more recent version:
"GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
of 2008-08-01 on LENNART-69DE564"
Progress: Some of the frame parameters that were incorrect in the first frame
now appear OK. Similarly for my custom *Completions* frame, *Help* frame, and
special-display frames - they all generally look OK now. Thanks for fixing this.
However, although the frames generally look OK now, there are still multiple
occurrences of the same frame parameters in `frame-parameters' - see attached
files, which show the value of (frame-parameters).
In addition, the fringe parameters are still wrong for the first frame: Fringe
appears in the first frame (it should not), but not in subsequent frames (as it
should not. This is my `default-frame-alist' (see oneonone.el):
((foreground-color . "Black")
(background-color . "LightBlue")
(font . "-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1")
(mouse-color . "Red")
(cursor-color . "Red")
(cursor-type . bar)
(menu-bar-lines . 1)
(top . 0)
(left . 0)
(width . 80)
(height . 35)
(minibuffer)
(user-position . t)
(vertical-scroll-bars . right)
(icon-type)
(left-fringe . 0)
(right-fringe . 0)
(fringe . 0)
(menu-bar-lines . 1)
(tool-bar-lines . 0))
The attached files show the actual frame parameters for the first frame and
subsequent (non-special) frames.
Note: By "first frame", I mean the first frame other than my standalone
minibuffer frame. In this case, the first frame shows Dired. I then used `C-x 5
d' to get the second frame.
Thx - Drew
P.S. Although things are generally better now than for the 7/26 build, there is
regression in the display of fonts for both tabbar.el tabs and About Emacs
screen. I filed separate bugs for those problems, but the same startup files are
involved: hexrgb.el and oneonone.el.
[Also, I still see the problem that a frame's text will often become blanked out
partially or completely and remain that way. I must select the frame and do
`C-l' to get the text back. I assume that this is a general problem that has
already been reported.]
> From: Drew Adams Sent: Wednesday, July 09, 2008 8:28 AM
> You can use the attached code to repro the problem.
> See initial bug report for symptom details.
>
> emacs -Q --debug-init -l ".../path/to/hexrgb.el" -l
> ".../path/to/oneonone.el" -f
> "1on1-emacs"
[-- Attachment #2: bug-117-second-frame.el --]
[-- Type: application/octet-stream, Size: 1274 bytes --]
((parent-id)
(explicit-name)
(display . "")
(icon-name)
(window-id . "2360812")
(buried-buffer-list)
(buffer-list #<buffer drews-lisp-20>)
(unsplittable)
(modeline . t)
(name . "drews-lisp-20")
(background-mode . light)
(display-type . color)
(tool-bar-lines . 0)
(menu-bar-lines . 1)
(fringe . 0)
(right-fringe . 0)
(left-fringe . 0)
(tool-bar-lines . 1)
(icon-type)
(vertical-scroll-bars . right)
(user-position . t)
(minibuffer)
(height . 57)
(width . 49)
(left . 0)
(top . 0)
(menu-bar-lines . 1)
(cursor-type . bar)
(visibility . t)
(alpha)
(scroll-bar-width . 17)
(cursor-type . bar)
(auto-lower)
(auto-raise)
(icon-type)
(title)
(buffer-predicate)
(tool-bar-lines . 1)
(menu-bar-lines . 1)
(right-fringe . 0)
(left-fringe . 0)
(line-spacing)
(screen-gamma)
(border-color . "black")
(cursor-color . "Red")
(mouse-color . "Red")
(background-color . "LightBlue")
(foreground-color . "Black")
(vertical-scroll-bars . right)
(internal-border-width . 0)
(border-width . 2)
(font . "-outline-Lucida Console-normal-normal-normal-mono-14-*-*-*-c-*-iso8859-1")
(font-parameter . "-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1")
(font-backend uniscribe gdi))
[-- Attachment #3: bug-117-first-frame.el --]
[-- Type: application/octet-stream, Size: 1864 bytes --]
((parent-id)
(name . "drews-lisp-20")
(font-backend uniscribe gdi)
(border-width . 2)
(internal-border-width . 0)
(vertical-scroll-bars . right)
(screen-gamma)
(line-spacing)
(left-fringe . 8)
(right-fringe . 8)
(menu-bar-lines . 1)
(tool-bar-lines . 0)
(buffer-predicate)
(title)
(icon-type)
(auto-raise)
(auto-lower)
(cursor-type . bar)
(scroll-bar-width . 17)
(alpha)
(window-system . w32)
(horizontal-scroll-bars . t)
(display-type . color)
(background-mode . light)
(environment)
(height . 57)
(width . 49)
(modeline . t)
(minibuffer)
(unsplittable)
(buffer-list #<buffer drews-lisp-20>)
(buried-buffer-list)
(left . 0)
(top . 0)
(window-id . "1377652")
(icon-name)
(display . "")
(explicit-name . t)
(tool-bar-lines . 0)
(menu-bar-lines . 1)
(fringe . 0)
(right-fringe . 0)
(left-fringe . 0)
(icon-type)
(vertical-scroll-bars . right)
(user-position . t)
(minibuffer)
(height . 35)
(width . 80)
(left . 0)
(top . 0)
(menu-bar-lines . 1)
(cursor-type . bar)
(tool-bar-lines . 0)
(menu-bar-lines . 1)
(reverse)
(user-position . t)
(user-size . t)
(visibility . t)
(alpha)
(scroll-bar-width . 17)
(cursor-type . bar)
(auto-lower)
(auto-raise)
(icon-type)
(title)
(buffer-predicate)
(tool-bar-lines . 0)
(menu-bar-lines . 1)
(right-fringe . 0)
(left-fringe . 0)
(line-spacing)
(screen-gamma)
(border-color . "black")
(cursor-color . "Red")
(mouse-color . "Red")
(background-color . "LightBlue")
(foreground-color . "Black")
(vertical-scroll-bars . right)
(internal-border-width . 0)
(border-width . 2)
(font . "-outline-Lucida Console-normal-normal-normal-mono-14-*-*-*-c-*-iso8859-1")
(font-parameter . "-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1")
(font-backend uniscribe gdi))
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-08-02 20:36 ` Drew Adams
@ 2008-08-02 21:07 ` Jason Rumney
2008-08-02 22:08 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Jason Rumney @ 2008-08-02 21:07 UTC (permalink / raw)
To: Drew Adams, 117
Drew Adams wrote:
> [Also, I still see the problem that a frame's text will often become blanked out
> partially or completely and remain that way. I must select the frame and do
> `C-l' to get the text back. I assume that this is a general problem that has
> already been reported.]
A bad assumption. You appear to be the only one with this problem.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-08-02 21:07 ` Jason Rumney
@ 2008-08-02 22:08 ` Drew Adams
2008-08-27 16:41 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Drew Adams @ 2008-08-02 22:08 UTC (permalink / raw)
To: 'Jason Rumney', 117
> > [Also, I still see the problem that a frame's text will
> > often become blanked out partially or completely and remain
> > that way. I must select the frame and do `C-l' to get the
> > text back. I assume that this is a general problem that has
> > already been reported.]
>
> A bad assumption. You appear to be the only one with this problem.
Oh, well, in that case the recipe is the same as for bug #117.
You're right that I don't see the problem with just emacs -Q (there is only a
tiny delay before a frame gets repainted, if you move another frame over part of
it temporarily etc).
What I see with oneonone.el is that a frame can remain forever blanked out,
until I go to it and do C-l. The blank part can be from from other window mgr
window having covered part of the frame. But I think it can also happen without
having been covered by another w-m window. If you try the recipe I sent, you
will soon enough see the problem. It might also happen more if there are more
apps open (not sure) - e.g. multiple copies of Emacs.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-08-02 22:08 ` Drew Adams
@ 2008-08-27 16:41 ` Drew Adams
2008-08-28 15:04 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Drew Adams @ 2008-08-27 16:41 UTC (permalink / raw)
To: 117, 'Jason Rumney'
> From: Drew Adams Sent: Saturday, August 02, 2008 3:08 PM
> > > [Also, I still see the problem that a frame's text will
> > > often become blanked out partially or completely and remain
> > > that way. I must select the frame and do `C-l' to get the
> > > text back. I assume that this is a general problem that has
> > > already been reported.]
> >
> > A bad assumption. You appear to be the only one with this problem.
>
> Oh, well, in that case the recipe is the same as for bug #117.
>
> You're right that I don't see the problem with just emacs -Q
> (there is only a tiny delay before a frame gets repainted,
> if you move another frame over part of
> it temporarily etc).
>
> What I see with oneonone.el is that a frame can remain
> forever blanked out, until I go to it and do C-l. The blank
> part can be from from other window mgr window having covered
> part of the frame. But I think it can also happen without
> having been covered by another w-m window. If you try the
> recipe I sent, you will soon enough see the problem. It might
> also happen more if there are more
> apps open (not sure) - e.g. multiple copies of Emacs.
In the pretest (22.2.90), all of the symptoms I reported previously (multiple
frame parameters, display problems) for this bug seem to have been taken care
of.
Thanks very much. Dunno if this bug report helped at all, but anyway, thanks.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-08-27 16:41 ` Drew Adams
@ 2008-08-28 15:04 ` Drew Adams
2008-08-30 14:38 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Drew Adams @ 2008-08-28 15:04 UTC (permalink / raw)
To: 117, 'Jason Rumney'
> From: Drew Adams Sent: Wednesday, August 27, 2008 9:41 AM
> > From: Drew Adams Sent: Saturday, August 02, 2008 3:08 PM
> > > > [Also, I still see the problem that a frame's text will
> > > > often become blanked out partially or completely and remain
> > > > that way. I must select the frame and do `C-l' to get the
> > > > text back. I assume that this is a general problem that has
> > > > already been reported.]
> > >
> > > A bad assumption. You appear to be the only one with this problem.
> >
> > Oh, well, in that case the recipe is the same as for bug #117.
> >
> > You're right that I don't see the problem with just emacs -Q
> > (there is only a tiny delay before a frame gets repainted,
> > if you move another frame over part of
> > it temporarily etc).
> >
> > What I see with oneonone.el is that a frame can remain
> > forever blanked out, until I go to it and do C-l. The blank
> > part can be from from other window mgr window having covered
> > part of the frame. But I think it can also happen without
> > having been covered by another w-m window. If you try the
> > recipe I sent, you will soon enough see the problem. It might
> > also happen more if there are more
> > apps open (not sure) - e.g. multiple copies of Emacs.
>
> In the pretest (22.2.90), all of the symptoms I reported
> previously (multiple
> frame parameters, display problems) for this bug seem to have
> been taken care
> of.
>
> Thanks very much. Dunno if this bug report helped at all, but
> anyway, thanks.
Sorry, I was confused. I was thinking this was an Emacs 23 pretest. These
problems still exist in Emacs 23. :-(
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-08-28 15:04 ` Drew Adams
@ 2008-08-30 14:38 ` Drew Adams
2008-10-31 21:05 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Drew Adams @ 2008-08-30 14:38 UTC (permalink / raw)
To: 117, 'Jason Rumney'
> Sorry, I was confused. I was thinking this was an Emacs 23
> pretest. These problems still exist in Emacs 23. :-(
FYI - I just checked with a new build of 8-29, and the problems still exist.
* Duplicate and contradictory frame params.
* Fringe (left and right) on first frame, even though default-frame-alist
specifies no fringe. No fringe problem with subsequent frames.
* Bizarre, unreadable symbols, intead of normal alphabetic characters, in tabbar
tabs and Info headings.
* Frames not getting redisplayed, so uncovering a frame that was overlapped by
another (or by a non-Emacs window-mgr window) shows the overlapped part as blank
(until you select the frame and do C-l).
* Tool bar showing in new frames even though tool-bar mode is turned off. Oddly
enough, if I do C-x 5 f foo.el, even in the same file foo.el, the tool bar shows
up, but if I instead do C-x 5 2, the tool bar does not show up.
HTH.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-08-30 14:38 ` Drew Adams
@ 2008-10-31 21:05 ` Drew Adams
0 siblings, 0 replies; 16+ messages in thread
From: Drew Adams @ 2008-10-31 21:05 UTC (permalink / raw)
To: 117, 'Jason Rumney'
[-- Attachment #1: Type: text/plain, Size: 1636 bytes --]
1. The problems I reported previously remain, even with this recent build:
In GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600)
of 2008-10-09 on LENNART-69DE564
Windowing system distributor `Microsoft Corp.', version 5.1.2600
configured using `configure --with-gcc (3.4) --no-opt --cflags -Ic:/g/include
-fno-crossjumping'
2. In addition is the following problem. It has also always been there since the
original bug report, but I neglected to mention it before. Perhaps knowing this
will help with the rest of the symptoms.
After the original recipe (see mail below), do this (the actual sizes are
unimportant):
M-: (set-frame-size (selected-frame) 60 40)
Problem: There was no fringe before the `set-frame-size', but both left and
right fringe appear after calling `set-frame-size'.
Perhaps this is related to the fact that Emacs 23 introduces extraneous copies
of frame parameters (`left-fringe' etc.) - see previous mails in this thread.
Note: this is the initial frame. If you do `C-x 5 2' and change the frame size
of the new frame, no fringe appears. The bug symptoms I have reported have to do
with the initial frame.
I've attached the (same) code again, in hopes that someone will please try to
fix this. Thx.
> --------------8<-----------------------------------
> From: Drew Adams Sent: Wednesday, July 09, 2008 8:28 AM
> To: 117@emacsbugs.donarmstrong.com
> Subject: bug#117: bug 117: messed up frame parameters
>
> You can use the attached code to repro the problem.
> See initial bug report for symptom details.
>
> emacs -Q --debug-init -l ".../path/to/hexrgb.el" -l
> ".../path/to/oneonone.el" -f "1on1-emacs"
[-- Attachment #2: oneonone.el --]
[-- Type: application/octet-stream, Size: 71097 bytes --]
;;; oneonone.el --- Frame configuration that uses one frame per window.
;;
;; Filename: oneonone.el
;; Description: Frame configuration that uses one frame per window.
;; Author: Drew Adams
;; Maintainer: Drew Adams
;; Copyright (C) 1999-2008, Drew Adams, all rights reserved.
;; Created: Fri Apr 2 12:34:20 1999
;; Version: 21.1
;; Last-Updated: Tue Feb 12 07:08:17 2008 (Pacific Standard Time)
;; By: dradams
;; Update #: 2344
;; URL: http://www.emacswiki.org/cgi-bin/wiki/oneonone.el
;; Keywords: local, frames
;; Compatibility: GNU Emacs 20.x, GNU Emacs 21.x, GNU Emacs 22.x
;;
;; Features that might be required by this library:
;;
;; `avoid', `cl', `files+', `frame-cmds', `frame-fns', `hexrgb',
;; `misc-fns', `oneonone', `strings', `thingatpt', `thingatpt+',
;; `zoom-frm'.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Commentary:
;;
;; Frame configuration that uses one frame per window.
;;
;; This library is part of One-on-One Emacs, a collection of
;; libraries that try to make Emacs more frame-oriented and less
;; window-oriented.
;;
;; This library sets up Emacs to use multiple frames: individual
;; frames are used, by default, instead of Emacs windows. That is,
;; the default is to use a frame for each Emacs window: one window on
;; one frame.
;;
;; You can configure each of the frames defined here.
;;
;; Default properties are defined here for normal frames and
;; "special" frames, which show "special-display buffers" (see Emacs
;; manual for info on such frames).
;;
;; In addition, these user options control the creation of three
;; separate, specialized frames:
;;
;; - `1on1-*Help*-frame-flag' - *Help* buffer frame
;; - `1on1-*Completions*-frame-flag' - *Completions* buffer frame
;; - `1on1-minibuffer-frame-flag' - minibuffer frame
;;
;; Buffers *Help* and *Completions* are always displayed in their own
;; frames. In addition, if `1on1-*Help*-frame-flag' or
;; `1on1-*Completions*-frame-flag' is non-nil, then the *Help* or
;; *Completions* frame has a special (customizable) appearance.
;;
;; If `1on1-minibuffer-frame-flag' is non-nil (the default value),
;; then the minibuffer is shown in its own frame,
;; `1on1-minibuffer-frame'; this is the only frame to have a
;; minibuffer. If you customize `1on1-minibuffer-frame-flag' to nil,
;; then each frame will have its own minibuffer, as usual, and there
;; will be no standalone minibuffer frame.
;;
;; By default, if you use a standalone minibuffer frame, it is
;; automatically sized to the full width of your display and placed
;; at the bottom of the display. During minibuffer input, you can
;; use `1on1-fit-minibuffer-frame' (bind to `C-o') to resize its
;; height to fit the input text - the height is reset when inputting
;; is done. To help you perceive changes to different minibuffer
;; recursion levels, the background color of the minibuffer frame is
;; changed slightly with each recursion-depth change.
;;
;; This library is especially useful if used in combination with
;; One-on-One Emacs libraries `autofit-frame.el', which automatically
;; fits frames to their sole window, and `fit-frame.el', which lets
;; you fit a frame to its selected window manually. Library
;; `autofit-frame.el' uses library `fit-frame.el'.
;;
;; Because Emacs is not really designed to be frame-oriented, there
;; are many built-in and standard functions that produce
;; less-than-optimal results when frames, instead of windows, are the
;; default. In other One-on-One Emacs libraries, I have fixed most
;; of these built-in functions to play well with frames.
;;
;; For more information on One-on-One Emacs see
;; http://www.emacswiki.org/cgi-bin/wiki/OneOnOneEmacs.
;;
;; To use this library, put the following at the *END* of your init
;; file, `.emacs' (or `_emacs'). In particular, if your init file
;; contains a `custom-set-variables' expression, then the following
;; must appear *AFTER* that expression, in order for this to take
;; into account your customizations of any `1on1-' user options.
;;
;; (require 'oneonone)
;; (1on1-emacs)
;;
;; Initial frame: By default, the initial Emacs frame is like all
;; other normal (non-special-display) frames; that is,
;; `initial-frame-alist' effectively uses the frame properties
;; defined in `default-frame-alist'. If you would like the initial
;; frame to be different, set `default-frame-alist' to nil after
;; requiring `oneonone.el' but before executing `1on1-emacs':
;;
;; (require 'oneonone)
;; (setq default-frame-alist nil)
;; (setq initial-frame-alist '((background-color . "White"))); e.g.
;; (1on1-emacs)
;;
;; If you want the text cursor to change to a box when Emacs is idle,
;; then add this line also to your init file:
;;
;; (toggle-box-cursor-when-idle 1) ; Turn on box cursor when idle.
;;
;; Info and Customize frames: I recommend that you put the following
;; code in your init file, so that Info and Customize buffers will
;; display in their own frames. Which code to use depends on your
;; version of GNU Emacs.
;;
;; (cond ((< emacs-major-version 21)
;; (remove-hook 'same-window-buffer-names "*info*"))
;; ((= emacs-version 21)
;; (remove-hook 'same-window-buffer-names "*info*")
;; (remove-hook 'same-window-regexps "\\`\\*Customiz.*\\*\\'"))
;; (t
;; (remove-hook 'same-window-regexps "\\*info\\*\\(\\|<[0-9]+>\\)")
;; (remove-hook 'same-window-regexps "\\`\\*Customiz.*\\*\\'")))
;;
;; Recommended key bindings (requires library `fit-frame.el'):
;;
;; (define-key minibuffer-local-map "\C-o"
;; '1on1-fit-minibuffer-frame)
;; (define-key minibuffer-local-must-match-map "\C-o"
;; '1on1-fit-minibuffer-frame)
;; (define-key minibuffer-local-completion-map "\C-o"
;; '1on1-fit-minibuffer-frame)
;;
;;
;; Notes on user options defined here:
;; ---------------------------------
;;
;; Some user options are used here only as conveniences to define
;; frame-parameter alists. They are defined using `defvar', not
;; `defcustom', because you cannot use Customize to define them
;; independently of the alist user options they help to define. The
;; alists themselves are the variables to customize. If you want to
;; change the `defvar' variables individually and then use them to
;; set the alist variables, then use `setq', not Customize, to change
;; them, and restart Emacs for their changes to take effect.
;;
;; Changes to any user options defined here with `defcustom' will
;; take effect as soon as `1on1-emacs' is executed, so you can do
;; `M-x 1on1-emacs' to see their changes (no need to restart
;; Emacs).
;;
;; User options `1on1-color-minibuffer-frame-on-setup-increment' and
;; `1on1-color-minibuffer-frame-on-exit-increment' determine how much
;; to change the color of the minibuffer frame when the minibuffer is
;; entered and exitted. They are hue increments, and should be
;; opposite in sign. They should cancel each other out, so that the
;; color returns to what it was initially at any given
;; recursive-minibuffer depth. However, because of the way HSV and
;; RGB color-component conversion works, the best cancellation does
;; not occur when these have the same absolute value. And, how much
;; their absolute values should differ depends on that magnitude.
;; It's best to just set one of these to an increment you like, and
;; then fiddle with the other until they more or less cancel.
;;
;;
;; New functions and macros defined here (each has prefix `1on1-'):
;;
;; `box-cursor-when-idle', `change-cursor-on-input-method',
;; `change-cursor-on-overwrite/read-only',
;; `color-minibuffer-frame-on-exit',
;; `color-minibuffer-frame-on-setup',
;; `color-isearch-minibuffer-frame', `display-*Completions*-frame',
;; `display-*Help*-frame', `emacs', `fit-minibuffer-frame',
;; `flash-ding-minibuffer-frame', `increment-color-hue',
;; `minibuffer-prompt-end', `reset-minibuffer-frame',
;; `set-box-cursor-when-idle-interval', `set-cursor-type',
;; `set-minibuffer-frame-top/bottom', `set-minibuffer-frame-width',
;; `setup-minibuffer-frame-coloring',
;; `setup-mode-line'. `toggle-box-cursor-when-idle'.
;;
;; Customizable user options defined here (each has prefix `1on1-'):
;;
;; `*Completions*-frame-flag', `*Completions*-frame-at-right-flag',
;; `*Help*-frame-flag', `active-minibuffer-frame-background',
;; `active-mode-line-background',
;; `change-cursor-on-overwrite/read-only-flag',
;; `color-minibuffer-frame-on-exit-increment',
;; `color-minibuffer-frame-on-setup-increment',
;; `color-mode-line-flag', `completions-frame-background',
;; `completions-frame-mouse+cursor-color',
;; `completions-frame-width', `default-frame-alist',
;; `help-frame-background', `help-frame-mouse+cursor-color',
;; `inactive-minibuffer-frame-background',
;; `inactive-mode-line-background',
;; `isearch-minibuffer-frame-background', `minibuffer-frame-alist',
;; `minibuffer-frame-left', `minibuffer-frame-top/bottom',
;; `minibuffer-frame-width', `minibuffer-frame-width-percent',
;; `special-display-frame-alist'.
;;
;; Non-customizable user options defined here (prefix `1on1-'):
;;
;; `default-frame-background', `default-frame-cursor-color',
;; `default-frame-cursor-color-input-method',
;; `default-frame-cursor-type',
;; `default-frame-cursor-type-overwrite/read-only',
;; `default-frame-font', `default-frame-foreground',
;; `default-frame-menu-bar-lines', `default-frame-mouse-color',
;; `default-frame-size', `default-frame-upper-left-corner',
;; `default-special-frame-background',
;; `default-special-frame-cursor-color',
;; `default-special-frame-font',
;; `default-special-frame-foreground',
;; `default-special-frame-menu-bar-lines',
;; `default-special-frame-mouse-color',
;; `default-special-frame-size',
;; `default-special-frame-upper-left-corner',
;; `minibuffer-frame-background', `minibuffer-frame-cursor-color',
;; `minibuffer-frame-flag', `minibuffer-frame-font',
;; `minibuffer-frame-foreground', `minibuffer-frame-height',
;; `minibuffer-frame-mouse-color'.
;;
;; Other new variables defined here (each has prefix `1on1-'):
;;
;; `box-cursor-when-idle-p', `box-cursor-when-idle-interval',
;; `box-cursor-when-idle-timer', `last-cursor-type',
;; `minibuffer-frame'.
;;
;;
;; ***** NOTE: These EMACS PRIMITIVES have been REDEFINED HERE:
;;
;; `abort-recursive-edit', `top-level' -
;; Reset color of minibuffer frame to "inactive" color.
;;
;; `y-or-n-p' - Temporarily color minibuffer frame to "active" color.
;;
;;
;; Acknowledgements:
;;
;; The cursor-changing on input method and read-only was inspired by
;; Juri Linkov <juri@jurta.org>. Joe Casadonte <joc@netaxs.com>
;; wrote a similar hook (`joc-cursor-type-set-hook'), which he got
;; from Steve Kemp...
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Change log:
;;
;; 2007/12/05 dadams
;; 1on1-minibuffer-frame-left: Added :type.
;; 1on1-color-mode-line-flag, 1on1-minibuffer-frame-flag: defvar -> defcustom.
;; 1on1-(minibuffer|(special-)default)-frame-*: Removed * doc-string prefix.
;; 2007/11/22 dadams
;; Added: 1on1-reset-minibuffer-frame, 1on1-fit-minibuffer-frame,
;; 1on1-minibuffer-prompt-end. Recommend C-o key binding.
;; Use 1on1-reset-minibuffer-frame on minibuffer-exit-hook.
;; 2007/08/14 dadams
;; 1on1-emacs:
;; Add *Completions* to special-display-buffer-names even if
;; 1on1-*Completions*-frame-flag is nil, so minibuffer gets focus.
;; Set w(in)32-grab-focus-on-raise to nil.
;; 1on1-display-*Completions*-frame:
;; Don't change mouse pointer unless 1on1-*Completions*-frame-flag.
;; 1on1-minibuffer-frame-background: Use std minibuffer-frame-alist bg, if defined.
;; 2007/05/28 dadams
;; 1on1-display-*Completions*-frame:
;; Wrap zoom-frm-out in condition-case (hack for Emacs 23 problem changing size).
;; 2007/03/10 dadams
;; Added: 1on1-completions-frame-width. Use it in 1on1-emacs.
;; 2007/02/08 dadams
;; Removed: ^L-appearance-vector.
;; 1on1-emacs: No longer change ^L appearance - use my library pp-c-l.el to do that.
;; 2007/02/04 dadams
;; 1on1-emacs:
;; Initialize standard-display-table if nil (default is nil!). Thx to FidelSalas.
;; 2006/12/27 dadams
;; 1on1-change-cursor-on-input-method: Respect 1on1-change-cursor-on-input-method-flag
;; 2006/12/12 dadams
;; Added: 1on1-^L-appearance-vector.
;; 1on1-emacs: Use 1on1-^L-appearance-vector to set ^L appearance.
;; 2006/12/11 dadams
;; 1on1-set-minibuffer-frame-top/bottom: 2 chars up, not 1, to fit Emacs 22 better.
;; 2006/10/28 dadams
;; 1on1-(in)active-minibuffer-frame-background,
;; 1on1-isearch-minibuffer-frame-background, 1on1-(in)active-mode-line-background,
;; 1on1-(help|completions)-frame-background,
;; 1on1-(help|completions)-frame-mouse+cursor-color,
;; 1on1-default-frame-cursor-color(-input-method):
;; Changed :type to 'color for Emacs 21+.
;; 2006/09/14 dadams
;; Removed mode-line position enhancements - use new library modeline-posn.el.
;; Removed: 1on1-color-mode-line-column-flag, 1on1-mode-line-column-limit.
;; 2006/09/04 dadams
;; 1on1-box-cursor-when-idle-timer: Cancel beforehand, and cancel after defining.
;; 1on1-toggle-box-cursor-when-idle:
;; Use 1on1-box-cursor-when-idle-off on pre-command-hook.
;; Don't read an event; just turn it on.
;; Added: 1on1-box-cursor-when-idle-off.
;; 2006/09/02 dadams
;; 1on1-toggle-box-cursor-when-idle: Corrected.
;; 2006/08/27 dadams
;; Added: 1on1-box-cursor-when-idle(-p|-interval|-timer), 1on1-last-cursor-type,
;; (1on1-)toggle-box-cursor-when-idle, 1on1-set-box-cursor-when-idle-interval.
;; 2006/08/13 dadams
;; defalias set-cursor-type to 1on1-set-cursor-type.
;; 2006/07/25 dadams
;; Added: 1on1-minibuffer-frame-left. Use in 1on1-minibuffer-frame-alist.
;; 2006/03/31 dadams
;; 1on1-default-frame-alist:
;; Changed (left|right)-fringe code, to reflect Emacs 22 change.
;; 2006/03/17 dadams
;; Renamed:
;; 1on1-color-active-minibuffer-frame to 1on1-color-minibuffer-frame-on-setup,
;; 1on1-color-inactive-minibuffer-frame to 1on1-color-minibuffer-frame-on-exit.
;; 1on1-color-minibuffer-frame-on-setup:
;; Redefined so hue depends on minibuffer-depth.
;; 2006/03/14 dadams
;; 1on1-color-(in)active-minibuffer-frame: Change hue for each minibuffer recursion.
;; Added: 1on1-increment-color-hue.
;; Require hexrgb.el
;; 2006/03/13 dadams
;; 1on1-color-inactive-minibuffer-frame:
;; Change color only when not in recursive minibuffer.
;; abort-recursive-edit: Change minibuffer color after, not before, abort.
;; 2006/01/07 dadams
;; Added :link
;; 2005/12/14 dadams
;; Added: 1on1-*Completions*-frame-at-right-flag.
;; Use in 1on1-display-*Completions*-frame.
;; 2005/11/28 dadams
;; Added: 1on1-change-cursor-on-overwrite-flag,
;; 1on1-change-cursor-on-input-method-flag, 1on1-default-frame-cursor-type,
;; 1on1-default-frame-cursor-type-overwrite, 1on1-default-frame-cursor-color,
;; 1on1-default-frame-cursor-color-input-mode, 1on1-change-cursor-on-overwrite,
;; 1on1-change-cursor-on-insert-mode, 1on1-set-cursor-type (thanks to
;; Juri Linkov for the last three).
;; 1on1-emacs: Use 1on1-change-cursor-* in post-command-hook.
;; 1on1-mode-line-column-limit: Corrected custom group.
;; 2005/11/22 dadams
;; Added: 1on1-setup-mode-line, 1on1-mode-line-column-limit,
;; 1on1-color-mode-line(-column)-flag, 1on1-(in)active-mode-line-background.
;; 2005/10/28 dadams
;; 1on1-display-*Completions*-frame: Zoom to smaller font.
;; 2005/07/31 dadams
;; 1on1-emacs: Do not set initial-frame-alist to default-frame-alist (D. Reitter).
;; 2005/07/25 dadams
;; Added :prefix to defgroup.
;; 2005/07/17 dadams
;; Switched default colors for 1on1-(in)active-minibuffer-frame-background,
;; so active is the brighter color. Change inactive to LightBlue.
;; 2005/06/01 dadams
;; Corrected typo that gave minibuffer frame a vertical scroll bar.
;; 2005/05/29 dadams
;; *-alist: Use values from standard alist variables, if available (that is,
;; don't override user settings.)
;; 2005/05/28 dadams
;; Renamed: 1on1-separate-minibuffer-frame-flag -> 1on1-minibuffer-frame-flag,
;; 1on1-separate-*Help*-frame-flag -> 1on1-*Help*-frame-flag,
;; 1on1-separate-*Completions*-frame-flag -> 1on1-*Completions*-frame-flag.
;; Added: setup-minibuffer-frame-coloring.
;; Added info in doc strings about use of each variable (restart/1on1-emacs).
;; Corrected 1on1-minibuffer-frame-alist and 1on1-special-display-frame-alist
;; for menu-bar-lines (nil).
;; 1on1-set-minibuffer-frame-top/bottom: Rewrote with modify-frame-parameters.
;; 1on1-emacs:
;; Make sensitive to any changes to 1on1-*[Help|Completions]*-frame-flag.
;; Move defcustom's, defvar's, and defun's outside 1on1-emacs.
;; If 1on1-minibuffer-frame already exists, just modify it.
;; Don't step on other parameters in standard alists; just append new values.
;; 2005/05/23 dadams
;; Changed some individual frame-parameter variables from defcustom to defvar.
;; Left them as user options, however, so you can change them with
;; set-variable before loading oneonone.el.
;; Renamed:
;; 1on1-upper-left-frame-corner-default ->
;; 1on1-default-frame-upper-left-corner
;; 1on1-default-special-display-frame-size ->
;; 1on1-default-special-frame-size
;; 1on1-upper-left-special-display-frame-corner-default ->
;; 1on1-default-special-frame-upper-left-corner
;; Split 1on1-menu-bar-lines into: 1on1-default-special-frame-menu-bar-lines,
;; 1on1-default-frame-menu-bar-lines
;; 2005/05/18 dadams
;; Fixed typo: "oneoneone" -> "oneonone".
;; 2005/05/17 dadams
;; Updated to work with Emacs 22.x.
;; 2005/05/09 dadams
;; Major reorganization/rewrite. Created, from previous version setup-frames.el.
;; Added prefix "1on1-".
;; Encapsulated stuff in new command 1on1-emacs.
;; 2005/01/29 dadams
;; 1on1-default-frame-font: Fixed bug - misplaced parens, so no good if not Windows.
;; 2005/01/19 dadams
;; Use defcustom now.
;; Removed (put ... 'variable-interactive...).
;; 1on1-minibuffer-frame-top/bottom: Must be an integer (for set-frame-position).
;; 2004/12/18 dadams
;; Bind after-make-frame-functions to nil when create 1on1-minibuffer-frame.
;; 2004/11/26 dadams
;; Removed ;;;###autoload's.
;; 2004/11/20 dadams
;; Refined to deal with Emacs 21 < 21.3.50 (soon to be 22.x)
;; 2004/10/01 dadams
;; Ensure loaded before compile.
;; No fringe.
;; Remove *info* and *Customiz.* buffers from `same-window-regexps'
;; 2004/09/21 dadams
;; Updated to work with Emacs 21 (and Emacs 20).
;; 2004/03/19 dadams
;; 1on1-minibuffer-frame-width -> 1on1-set-minibuffer-frame-width.
;; added 1on1-set-minibuffer-frame-top/bottom.
;; 2001/01/05 dadams
;; 1. 1on1-minibuffer-frame-width: Use 1on1-minibuffer-frame arg for frame-char-width.
;; 2. Don't define width when initially set 1on1-minibuffer-frame-alist. Instead,
;; use set-frame-width afterward, so 1on1-minibuffer-frame-width uses correct
;; character size.
;; 2001/01/05 dadams
;; 1. These vars no longer user options (interactively changeable):
;; 1on1-completions-frame-background, 1on1-completions-frame-mouse+cursor-color,
;; 1on1-help-frame-background, 1on1-help-frame-mouse+cursor-color,
;; 1on1-minibuffer-frame-cursor-color, 1on1-minibuffer-frame-font,
;; 1on1-minibuffer-frame-foreground, 1on1-minibuffer-frame-height,
;; 1on1-minibuffer-frame-mouse-color, 1on1-minibuffer-frame-top/bottom,
;; 1on1-minibuffer-frame-width.
;; 2. Added: 1on1-minibuffer-frame-width (function),
;; 1on1-minibuffer-frame-width-percent (var).
;; 3. Changed var 1on1-minibuffer-frame-width to nil default (now use *-percent).
;; 2000/09/27 dadams
;; 1. Added: 1on1-display-*Completions*-frame, 1on1-display-*Help*-frame.
;; 2. *Help* & *Completions* frames not created here. Instead, use
;; special-display-buffer-names & display-*-frame fns to define them.
;; 3. Added: top-level, abort-recursive-edit.
;; 1999/08/24 dadams
;; 1. Windows: win32-grab-focus-on-raise = nil.
;; 2. 1on1-default-frame-font different if Windows.
;; 3. Added: 1on1-separate-minibuffer-frame-flag, 1on1-menu-bar-lines,
;; 1on1-upper-left-frame-corner-default, 1on1-default-frame-size,
;; 1on1-upper-left-special-display-frame-corner-default,
;; 1on1-default-special-display-frame-size, 1on1-default-special-frame-foreground,
;; 1on1-default-special-frame-background, 1on1-default-special-frame-font,
;; 1on1-default-special-frame-mouse-color, 1on1-default-special-frame-cursor-color.
;; 4. Use new vars to define default-frame-alist, special-display-frame-alist.
;; 5. Only create built-in frames if 1on1-separate-minibuffer-frame-flag.
;; 6. Protected refs to x-* vars.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; This program is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.
;; This program is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
;; along with this program; see the file COPYING. If not, write to
;; the Free Software Foundation, Inc., 51 Franklin Street, Fifth
;; Floor, Boston, MA 02110-1301, USA.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Code:
(eval-and-compile (require 'cl)) ;; remove-if (plus, for Emacs < 20, when, unless)
(require 'frame-cmds nil t) ;; (no error if not found): rename-frame
(require 'files+ nil t) ;; (no error if not found): switch-to-buffer-other-frame
(require 'zoom-frm nil t) ;; (no error if not found): zoom-frm-out
(require 'hexrgb) ;; hexrgb-color-values-to-hex, hexrgb-hsv-to-rgb, hexrgb-rgb-to-hsv
;; Ensure that this is loaded before compiling it.
(provide 'oneonone)
(require 'oneonone)
;; To quiet the byte compiler
(unless (> emacs-major-version 21)
(defvar x-pointer-box-spiral)
(defvar x-pointer-xterm))
;;;;;;;;;;;;;;;;;;;;;;;;
(defgroup One-On-One nil
"Options to define initial frame configuration."
:prefix "1on1-" :group 'frames
:link `(url-link :tag "Send Bug Report"
,(concat "mailto:" "drew.adams" "@" "oracle" ".com?subject=\
oneonone.el bug: \
&body=Describe bug here, starting with `emacs -q'. \
Don't forget to mention your Emacs and library versions."))
:link '(url-link :tag "Other Libraries by Drew"
"http://www.emacswiki.org/cgi-bin/wiki/DrewsElispLibraries")
:link '(url-link :tag "Download" "http://www.emacswiki.org/cgi-bin/wiki/oneonone.el")
:link '(url-link :tag "Description"
"http://www.emacswiki.org/cgi-bin/wiki/OneOnOneEmacs")
:link '(emacs-commentary-link :tag "Commentary" "oneonone")
)
\f
;;; Minibuffer frame: ********************************
;;;
(defvar 1on1-minibuffer-frame nil
"Minibuffer-only frame used by One-on-One Emacs.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.")
(defcustom 1on1-minibuffer-frame-flag t
"*Non-nil means use a separate, specialized frame for the minibuffer.
If you change this variable, you will need to restart Emacs for it to
take effect."
:type 'boolean :group 'One-On-One)
(defvar 1on1-minibuffer-frame-foreground "Red"
"Default foreground color for the minibuffer frame.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-minibuffer-frame-background
(or (cdr (assq 'background-color minibuffer-frame-alist)) "LightBlue")
"Initial color of the `1on1-minibuffer-frame' background.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defcustom 1on1-active-minibuffer-frame-background "PaleGoldenrod"
"*The color of the `1on1-minibuffer-frame' when it is active.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-inactive-minibuffer-frame-background 1on1-minibuffer-frame-background
"*The color of the `1on1-minibuffer-frame' when it is inactive.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-isearch-minibuffer-frame-background "bisque"
"*Color of the `1on1-minibuffer-frame' when `isearch' is active.
See `1on1-color-isearch-minibuffer-frame'.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-color-mode-line-flag t
"*Non-nil means use `1on1-(in)active-mode-line-background'.
If you change this variable, you will need to restart Emacs for it to
take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-color-minibuffer-frame-on-exit-increment 5
"Increment to change minibuffer-frame hue when minibuffer is exited.
This should be opposite in sign to
`1on1-color-minibuffer-frame-on-setup-increment.'"
:type 'integer :group 'One-On-One)
(defcustom 1on1-color-minibuffer-frame-on-setup-increment -10
"Increment to change minibuffer-frame hue when minibuffer is entered.
This should be opposite in sign to
`1on1-color-minibuffer-frame-on-exit-increment.'"
:type 'integer :group 'One-On-One)
(defcustom 1on1-active-mode-line-background 1on1-active-minibuffer-frame-background
"*The color of the mode-line when it is active.
Note: This is not used if `1on1-color-mode-line-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-inactive-mode-line-background "LightGray"
"*The color of the mode-line when it is inactive.
Note: This is not used if `1on1-color-mode-line-flag' is nil."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defvar 1on1-minibuffer-frame-font
(if (eq system-type 'windows-nt)
"-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1"
;;;;;;;"-*-Lucida Console-normal-r-*-*-15-*-*-*-c-*-*-ansi-"
"-Misc-Fixed-Medium-R-Normal--15-140-75-75-C-90-ISO8859-1")
"Default font for the minibuffer frame.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-minibuffer-frame-mouse-color "Black"
"Default mouse color for the minibuffer frame.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-minibuffer-frame-cursor-color "Black"
"Default text cursor color for the minibuffer frame.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-minibuffer-frame-height 2
"Height of minibuffer frame, in characters.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
This is used only to define the standard value of
`1on1-minibuffer-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defcustom 1on1-minibuffer-frame-left 0
"*Position of left edge of minibuffer frame, in pixels.
An integer. If negative, then the position is that of the frame
bottom relative to the screen right (not left) edge.
See `default-frame-alist' for an explanation of frame parameters.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'integer :group 'One-On-One)
(defcustom 1on1-minibuffer-frame-top/bottom nil
"*Position of top (or bottom) of minibuffer frame, in pixels.
If nil, function `1on1-set-minibuffer-frame-top/bottom' will position
minibuffer at bottom of display.
An integer. If negative, then the position is that of the frame
bottom relative to the screen bottom.
See `default-frame-alist' for an explanation of frame parameters.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type '(choice (const :tag "Use function `1on1-set-minibuffer-frame-top/bottom'" nil)
(integer :tag "Pixels from top (>= 0) or bottom (< 0)" :value 0))
:group 'One-On-One)
(defcustom 1on1-minibuffer-frame-width nil
"Width, in characters, for minibuffer frame.
If nil, then function `1on1-set-minibuffer-frame-width' is used instead.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type '(choice (const :tag "Use function `1on1-set-minibuffer-frame-width'" nil)
(integer :tag "Width, in characters, for minibuffer frame" :value 0))
:group 'One-On-One)
(defcustom 1on1-minibuffer-frame-width-percent 100
"Max percent of the total display width to give to minibuffer frame.
See function `1on1-set-minibuffer-frame-width'.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'integer :group 'One-On-One)
;; Use values from the standard list, when available. However, we have no way of
;; distinguishing values predefined in vanilla Emacs from user settings.
(defcustom 1on1-minibuffer-frame-alist
(list
(or (assq 'foreground-color minibuffer-frame-alist)
(cons 'foreground-color 1on1-minibuffer-frame-foreground))
(or (assq 'background-color minibuffer-frame-alist)
(cons 'background-color 1on1-minibuffer-frame-background))
(or (assq 'font minibuffer-frame-alist)
(cons 'font 1on1-minibuffer-frame-font))
(or (assq 'mouse-color minibuffer-frame-alist)
(cons 'mouse-color 1on1-minibuffer-frame-mouse-color))
(or (assq 'cursor-color minibuffer-frame-alist)
(cons 'cursor-color 1on1-minibuffer-frame-cursor-color))
(or (assq 'menu-bar-lines minibuffer-frame-alist)
(cons 'menu-bar-lines nil))
(or (assq 'left minibuffer-frame-alist)
(cons 'left 1on1-minibuffer-frame-left))
(or (assq 'height minibuffer-frame-alist)
(cons 'height 1on1-minibuffer-frame-height))
(or (assq 'icon-type minibuffer-frame-alist)
(cons 'icon-type (< emacs-major-version 21))) ; `t' for Emacs 21 too?
(or (assq 'minibuffer minibuffer-frame-alist)
(cons 'minibuffer 'only))
(or (assq 'user-position minibuffer-frame-alist)
(cons 'user-position t))
(or (assq 'vertical-scroll-bars minibuffer-frame-alist) ; No scroll bar.
(cons 'vertical-scroll-bars nil))
(or (assq 'name minibuffer-frame-alist)
(cons 'name "Emacs Minibuffer")))
"Frame-parameter alist for the standalone minibuffer frame
`1on1-minibuffer-frame'.
Note: This is not used if `1on1-minibuffer-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
;; If we didn't need Emacs 20 compatibility, this could be:
;; :type '(alist :key-type symbol :value-type sexp)
:type '(repeat (cons :format "%v" (symbol :tag "Frame Parameter") (sexp :tag "Value")))
:group 'One-On-One)
\f
;;; *Help* frame: ********************************
;;; Display of *Help* buffer in custom frame.
;;; Background, height, cursor and pointer colors.
;;;
(defcustom 1on1-*Help*-frame-flag t
"*Non-nil means use a special appearance for the *Help* frame.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-help-frame-background "Thistle"
"Default background color for the *Help* buffer's frame.
Note: This is not used if `1on1-*Help*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-help-frame-mouse+cursor-color "Blue Violet"
"Default color for cursor & pointer of *Help* frame.
Note: This is not used if `1on1-*Help*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
\f
;;; *Completions* frame: ********************************
;;; Display of *Completion* buffer in custom frame.
;;; Background, height, cursor and pointer colors.
;;;
(defcustom 1on1-*Completions*-frame-flag t
"*Non-nil means use a special appearance for the *Completions* frame.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-*Completions*-frame-at-right-flag nil
"*Non-nil means place *Completions* frame at right edge of display.
This can be useful to make *Completions* more visible.
This has no effect if `1on1-*Completions*-frame-flag' is nil."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-completions-frame-background "LavenderBlush2"
"Default background color for the *Completions* buffer's frame.
Note: This is not used if `1on1-*Completions*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-completions-frame-mouse+cursor-color "VioletRed"
"Default color for cursor & pointer of *Completions* frame.
Note: This is not used if `1on1-*Completions*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-completions-frame-width 100
"Width, in characters, for *Completions* frame.
If this is nil, then the pertinent default frame width is used.
Note: This is not used if `1on1-*Completions*-frame-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'integer :group 'One-On-One)
\f
;;; Default for normal frames: `1on1-default-frame-alist' **************************
;;;
(defvar 1on1-default-frame-foreground "Black"
"Default foreground color for non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-background "LightBlue"
"Default background color for non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-font
(if (eq system-type 'windows-nt)
"-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1"
;;;;;;"-*-Lucida Console-normal-r-*-*-15-*-*-*-c-*-*-ansi-"
"-Misc-Fixed-Medium-R-Normal--15-140-75-75-C-90-ISO8859-1")
"Default font for non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-mouse-color "Red"
"Default mouse-pointer color for non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defcustom 1on1-change-cursor-on-input-method-flag t
"*Non-nil means to use a different cursor when using an input method.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-default-frame-cursor-color "Red"
"*Default text cursor color for non-special frames.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect. Furthermore, if
`1on1-change-cursor-on-input-method-flag' is nil when you rerun
`1on1-emacs', you will need to toggle that variable to non-nil (and
back to nil, if that's the value you want). Otherwise, the new value
will take effect only after you restart Emacs."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-default-frame-cursor-color-input-method "Orange"
"*Default cursor color for non-special frames if using an input method.
This has no effect if `1on1-change-cursor-on-input-method-flag' is nil.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type (if (>= emacs-major-version 21) 'color 'string) :group 'One-On-One)
(defcustom 1on1-change-cursor-on-overwrite/read-only-flag t
"*Non-nil means use a different cursor when overwrite mode or read-only.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
:type 'boolean :group 'One-On-One)
(defcustom 1on1-default-frame-cursor-type 'bar
"*Default text cursor type for non-special frames.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect. Furthermore, if
`1on1-change-cursor-on-overwrite/read-only-flag' is nil when you rerun
`1on1-emacs', you will need to toggle that variable to non-nil (and
back to nil, if that's the value you want). Otherwise, the new value
will take effect only after you restart Emacs."
:type 'symbol :group 'One-On-One)
(defvar 1on1-last-cursor-type 1on1-default-frame-cursor-type "Saved last cursor type.")
(defcustom 1on1-default-frame-cursor-type-overwrite/read-only 'box
"*Default text cursor type for overwrite mode or read-only buffer.
This applies only to non-special frames. This has no effect if
`1on1-change-cursor-on-overwrite/read-only-flag' is nil. If you
customize this variable, you will need to rerun `1on1-emacs' for the
new value to take effect."
:type 'symbol :group 'One-On-One)
(defvar 1on1-box-cursor-when-idle-p t
"Non-nil means to use a box cursor whenever Emacs is idle.
Do NOT change this yourself; instead, use `\\[toggle-box-cursor-when-idle]'.")
(defvar 1on1-box-cursor-when-idle-interval 2
"Number of seconds to wait before changing cursor type to box.
Do NOT change this yourself to change the wait period; instead, use
`\\[1on1-set-box-cursor-when-idle-interval]'.")
(defvar 1on1-box-cursor-when-idle-timer
(progn ; Cancel to prevent duplication.
(when (boundp '1on1-box-cursor-when-idle-timer)
(cancel-timer 1on1-box-cursor-when-idle-timer))
(run-with-idle-timer 1on1-box-cursor-when-idle-interval t '1on1-box-cursor-when-idle))
"Timer used to change the cursor to a box cursor when Emacs is idle.")
;; Turn it off, by default. You must use `toggle-box-cursor-when-idle' to turn it on.
(cancel-timer 1on1-box-cursor-when-idle-timer)
(defvar 1on1-default-frame-menu-bar-lines 1
"Number of lines used for the menu bar in non-special frames.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-upper-left-corner '(0 . 0)
"Position of upper left frame corner.
A cons whose car is the distance from the top in pixels
and whose cdr is the distance from the left in pixels.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
(defvar 1on1-default-frame-size '(80 . 35)
"Default frame size.
A cons whose car is the frame width in pixels
and whose cdr is the frame height in pixels.
This is used only to define the standard value of
`1on1-default-frame-alist'. Customize that variable, not this one.
If you change this variable, you will need to restart Emacs for it to
take effect.")
;; Use values from the standard list, when available. However, we have no way of
;; distinguishing values predefined in vanilla Emacs from user settings.
(defcustom 1on1-default-frame-alist
(list
(or (assq 'foreground-color default-frame-alist)
(cons 'foreground-color 1on1-default-frame-foreground))
(or (assq 'background-color default-frame-alist)
(cons 'background-color 1on1-default-frame-background))
(or (assq 'font default-frame-alist)
(cons 'font 1on1-default-frame-font))
(or (assq 'mouse-color default-frame-alist)
(cons 'mouse-color 1on1-default-frame-mouse-color))
(or (assq 'cursor-color default-frame-alist)
(cons 'cursor-color 1on1-default-frame-cursor-color))
(or (assq 'cursor-type default-frame-alist)
(cons 'cursor-type 1on1-default-frame-cursor-type))
(or (assq 'menu-bar-lines default-frame-alist)
(cons 'menu-bar-lines 1on1-default-frame-menu-bar-lines))
(or (assq 'top default-frame-alist)
(cons 'top (car 1on1-default-frame-upper-left-corner)))
(or (assq 'left default-frame-alist)
(cons 'left (cdr 1on1-default-frame-upper-left-corner)))
(or (assq 'width default-frame-alist)
(cons 'width (car 1on1-default-frame-size)))
(or (assq 'height default-frame-alist)
(cons 'height (cdr 1on1-default-frame-size)))
(or (assq 'minibuffer default-frame-alist)
(cons 'minibuffer (not 1on1-minibuffer-frame-flag)))
(or (assq 'user-position default-frame-alist)
(cons 'user-position t))
(or (assq 'vertical-scroll-bars default-frame-alist)
(cons 'vertical-scroll-bars 'right))
(or (assq 'icon-type default-frame-alist)
(cons 'icon-type (< emacs-major-version 21))) ; `t' for Emacs 21 too?
(or (assq 'tool-bar-lines default-frame-alist)
(cons 'tool-bar-lines 1)) ; Emacs 21+
(if (cdr (assq 'left-fringe default-frame-alist))
(assq 'left-fringe default-frame-alist)
(cons 'left-fringe 0)) ; Emacs 21+
(if (cdr (assq 'right-fringe default-frame-alist))
(assq 'right-fringe default-frame-alist)
(cons 'right-fringe 0)) ; Emacs 21+
(or (assq 'fringe default-frame-alist)
(cons 'fringe 0))) ; Emacs 21, but not 21.3.50 - REMOVE after 22.x
"Properties to be used for One-on-One Emacs `default-frame-alist'.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
;; If we didn't need Emacs 20 compatibility, this could be:
;; :type '(alist :key-type symbol :value-type sexp)
:type '(repeat (cons :format "%v" (symbol :tag "Frame Parameter") (sexp :tag "Value")))
:group 'One-On-One)
\f
;;; Special-display frames: `1on1-special-display-frame-alist' ************************
;;;
(defvar 1on1-default-special-frame-foreground "Black"
"Default foreground color for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-background "LightSteelBlue"
"Default background color for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-font
(if (eq system-type 'windows-nt)
"-*-Lucida Console-normal-r-*-*-14-112-96-96-c-*-iso8859-1"
;;;;;;;;"-*-Lucida Console-normal-r-*-*-15-*-*-*-c-*-*-ansi-"
"-Misc-Fixed-Medium-R-Normal--15-140-75-75-C-90-ISO8859-1")
"Default font for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-mouse-color "Yellow"
"Default mouse color for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-cursor-color "Yellow"
"Default text cursor color for special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-menu-bar-lines 1
"Number of lines used for the menu bar of special display frames.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-upper-left-corner '(0 . 0)
"Position of upper left corner of special display frames.
A cons whose car is the distance from the top in pixels
and whose cdr is the distance from the left in pixels.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
(defvar 1on1-default-special-frame-size '(80 . 20)
"Default size of special display frames.
A cons whose car is the frame width in pixels
and whose cdr is the frame height in pixels.
This is used only to define the standard value of
`1on1-special-display-frame-alist'. Customize that variable, not this
one. If you change this variable, you will need to restart Emacs for
it to take effect.")
;; Use values from the standard list, when available. However, we have no way of
;; distinguishing values predefined in vanilla Emacs from user settings.
(defcustom 1on1-special-display-frame-alist
(list
(or (assq 'font special-display-frame-alist)
(cons 'font 1on1-default-special-frame-font))
(or (assq 'width special-display-frame-alist)
(cons 'width (car 1on1-default-special-frame-size)))
(or (assq 'height special-display-frame-alist)
(cons 'height (cdr 1on1-default-special-frame-size)))
(or (assq 'mouse-color special-display-frame-alist)
(cons 'mouse-color 1on1-default-special-frame-mouse-color))
(or (assq 'cursor-color special-display-frame-alist)
(cons 'cursor-color 1on1-default-special-frame-cursor-color))
(or (assq 'menu-bar-lines special-display-frame-alist)
(cons 'menu-bar-lines 1on1-default-special-frame-menu-bar-lines))
(or (assq 'foreground-color special-display-frame-alist)
(cons 'foreground-color 1on1-default-special-frame-foreground))
(or (assq 'background-color special-display-frame-alist)
(cons 'background-color 1on1-default-special-frame-background))
(or (assq 'top special-display-frame-alist)
(cons 'top (car 1on1-default-special-frame-upper-left-corner)))
(or (assq 'left special-display-frame-alist)
(cons 'left (cdr 1on1-default-special-frame-upper-left-corner)))
(or (assq 'unsplittable special-display-frame-alist)
(cons 'unsplittable t))
(or (assq 'user-position special-display-frame-alist)
(cons 'user-position t))
(or (assq 'vertical-scroll-bars special-display-frame-alist)
(cons 'vertical-scroll-bars 'right)))
"Properties to be used for One-on-One `special-display-frame-alist'.
If you customize this variable, you will need to rerun `1on1-emacs'
for the new value to take effect."
;; If we didn't need Emacs 20 compatibility, this could be:
;; :type '(alist :key-type symbol :value-type sexp)
:type '(repeat (cons :format "%v" (symbol :tag "Frame Parameter") (sexp :tag "Value")))
:group 'One-On-One)
\f
;;; Main command ***************************************
;;;
;;;###autoload
(defun 1on1-emacs ()
"One-on-One Emacs setup.
Use `1on1-default-frame-alist' and `1on1-special-display-frame-alist'.
If `1on1-minibuffer-frame-flag' is non-nil, then create
minibuffer-only frame, `1on1-minibuffer-frame', using
`1on1-minibuffer-frame-alist'.
If `1on1-separate-minibuffer-*Help*-flag' is non-nil, then use
special frame for *Help* buffer.
If `1on1-separate-minibuffer-*Completions*-flag' is non-nil, then
use special frame for *Completions* buffer."
(interactive)
(setq default-frame-alist (append 1on1-default-frame-alist default-frame-alist)
special-display-frame-alist (append 1on1-special-display-frame-alist
special-display-frame-alist))
;; *Help* frame
(if 1on1-*Help*-frame-flag
(add-to-list
'special-display-buffer-names
(list "*Help*" '1on1-display-*Help*-frame
(list (cons 'background-color 1on1-help-frame-background)
(cons 'mouse-color 1on1-help-frame-mouse+cursor-color)
(cons 'cursor-color 1on1-help-frame-mouse+cursor-color)
'(height . 40))))
(setq special-display-buffer-names
(remove-if (lambda (elt) (equal "*Help*" (car elt)))
special-display-buffer-names)))
;; *Completions* frame
;; If `1on1-minibuffer-frame-flag' is non-nil, then *Completions* frame must be treated
;; specially, so that it gets focus from the minibuffer frame. This is so, even if
;; `1on1-*Completions*-frame-flag' is nil.
(if 1on1-minibuffer-frame-flag
(if 1on1-*Completions*-frame-flag
(add-to-list
'special-display-buffer-names
`("*Completions*" 1on1-display-*Completions*-frame
((background-color ,@1on1-completions-frame-background)
(mouse-color ,@1on1-completions-frame-mouse+cursor-color)
(cursor-color ,@1on1-completions-frame-mouse+cursor-color)
,@(and 1on1-completions-frame-width
`((width ,@1on1-completions-frame-width))))))
(add-to-list 'special-display-buffer-names
`("*Completions*" 1on1-display-*Completions*-frame)))
(setq special-display-buffer-names
(remove-if (lambda (elt) (equal "*Completions*" (car elt)))
special-display-buffer-names)))
;; Minibuffer frame
(when 1on1-minibuffer-frame-flag
;; `display-buffer' (& `*-other-window' fns) will use separate frames.
(setq pop-up-frames t
pop-up-frame-alist (append default-frame-alist pop-up-frame-alist))
;; Set up `1on1-minibuffer-frame'.
(setq minibuffer-frame-alist (append 1on1-minibuffer-frame-alist
minibuffer-frame-alist))
(if 1on1-minibuffer-frame
(modify-frame-parameters 1on1-minibuffer-frame 1on1-minibuffer-frame-alist)
(setq 1on1-minibuffer-frame
(let ((after-make-frame-functions nil)) ; E.g. inhibit `fit-frame'.
(make-frame 1on1-minibuffer-frame-alist))))
;; Resize and reposition it. If variable `1on1-minibuffer-frame-width'
;; or `1on1-minibuffer-frame-top/bottom' is nil, calculate automatically.
(1on1-set-minibuffer-frame-width)
(1on1-set-minibuffer-frame-top/bottom)
;; Rename minibuffer frame. (`rename-frame' is defined in `frame-cmds.el'.)
(when (fboundp 'rename-frame)
(rename-frame 1on1-minibuffer-frame "Emacs minibuffer \
show/hide: hold CTRL + click in window"))
(setq minibuffer-auto-raise t)
;; Background colors of minibuffer frame: 3 states
(add-hook 'isearch-mode-hook '1on1-color-isearch-minibuffer-frame)
(add-hook 'isearch-mode-end-hook '1on1-color-minibuffer-frame-on-exit)
(add-hook 'minibuffer-setup-hook '1on1-color-minibuffer-frame-on-setup)
(add-hook 'minibuffer-exit-hook '1on1-color-minibuffer-frame-on-exit)
;; Redefine built-in fns so they color minibuffer frame.
(1on1-setup-minibuffer-frame-coloring))
;; Hooks.
(if 1on1-change-cursor-on-overwrite/read-only-flag
(add-hook 'post-command-hook '1on1-change-cursor-on-overwrite/read-only)
(1on1-set-cursor-type 1on1-default-frame-cursor-type)
(remove-hook 'post-command-hook '1on1-change-cursor-on-overwrite/read-only))
(if 1on1-change-cursor-on-input-method-flag
(add-hook 'post-command-hook '1on1-change-cursor-on-input-method)
(setq current-input-method nil)
(1on1-change-cursor-on-input-method)
(remove-hook 'post-command-hook '1on1-change-cursor-on-input-method))
(add-hook 'minibuffer-exit-hook '1on1-reset-minibuffer-frame)
(setq w32-grab-focus-on-raise nil
win32-grab-focus-on-raise nil) ; older name
(1on1-setup-mode-line))
;; This is inspired by code from Juri Linkov <juri@jurta.org>.
(defun 1on1-change-cursor-on-input-method ()
"Set cursor type depending on whether an input method is used or not."
(when 1on1-change-cursor-on-input-method-flag
(set-cursor-color
(if current-input-method
1on1-default-frame-cursor-color-input-method
(let ((bufname (buffer-name (current-buffer))))
(cond
((string= "*Help*" bufname) 1on1-help-frame-mouse+cursor-color)
((string= "*Completions*" bufname) 1on1-completions-frame-mouse+cursor-color)
((eq 1on1-minibuffer-frame (selected-frame))
1on1-minibuffer-frame-cursor-color)
((special-display-p bufname) 1on1-default-special-frame-cursor-color)
(t 1on1-default-frame-cursor-color)))))))
;; This is from Juri Linkov <juri@jurta.org>, with read-only added.
(defun 1on1-change-cursor-on-overwrite/read-only ()
"Set cursor type differently for overwrite mode and read-only buffer.
That is, use one cursor type for overwrite mode and read-only buffers,
and another cursor type otherwise."
(1on1-set-cursor-type (if (or buffer-read-only overwrite-mode)
1on1-default-frame-cursor-type-overwrite/read-only
1on1-default-frame-cursor-type)))
(unless (fboundp 'set-cursor-type) (defalias 'set-cursor-type '1on1-set-cursor-type))
;; This is essentially from Juri Linkov <juri@jurta.org>.
(defun 1on1-set-cursor-type (cursor-type)
"Set the cursor type of the selected frame to CURSOR-TYPE.
When called interactively, prompt for the type to use.
To get the frame's current cursor type, use `frame-parameters'."
(interactive
(list (intern (completing-read "Cursor type: "
(mapcar 'list '("box" "hollow" "bar" "hbar" nil))))))
(modify-frame-parameters (selected-frame) (list (cons 'cursor-type cursor-type))))
(defun 1on1-box-cursor-when-idle ()
"Change the cursor to a box cursor when Emacs is idle."
(let ((type (cdr (assoc 'cursor-type (frame-parameters)))))
(unless (eq type 'box)
(setq 1on1-last-cursor-type type)
(1on1-set-cursor-type 'box))))
(defun 1on1-box-cursor-when-idle-off ()
"Turn off changing the cursor to a box cursor when Emacs is idle."
(when 1on1-last-cursor-type (1on1-set-cursor-type 1on1-last-cursor-type)))
(defalias 'toggle-box-cursor-when-idle '1on1-toggle-box-cursor-when-idle)
(defun 1on1-toggle-box-cursor-when-idle (&optional arg)
"Turn on or off automatically changing to a box cursor when idle.
When on, the cursor is changed to a box whenever Emacs is idle.
With prefix argument, turn on if ARG > 0; else turn off."
(interactive "P")
(setq 1on1-box-cursor-when-idle-p
(if arg (> (prefix-numeric-value arg) 0) (not 1on1-box-cursor-when-idle-p)))
(cond (1on1-box-cursor-when-idle-p
(timer-activate-when-idle 1on1-box-cursor-when-idle-timer)
(add-hook 'pre-command-hook '1on1-box-cursor-when-idle-off)
(message "Turned ON making cursor a box when Emacs is idle."))
(t
(cancel-timer 1on1-box-cursor-when-idle-timer)
(remove-hook 'pre-command-hook '1on1-box-cursor-when-idle-off)
(message "Turned OFF making cursor a box when Emacs is idle."))))
(defun 1on1-set-box-cursor-when-idle-interval (secs)
"Set wait until automatically change to a box cursor when Emacs is idle.
Whenever Emacs is idle for this many seconds it will change the cursor
to a box.
To turn on or off automatically changing to a box cursor when idle,
use `\\[toggle-box-cursor-when-idle]."
(interactive
"nSeconds to idle, before changing to a box cursor: ")
(timer-set-idle-time 1on1-box-cursor-when-idle-timer
(setq 1on1-box-cursor-when-idle-interval secs)
t))
(defun 1on1-display-*Help*-frame (buf &optional args)
"Display *Help* buffer in its own frame.
`special-display-function' is used to do the actual displaying.
BUF and ARGS are the arguments to `special-display-function'."
(let ((old-ptr-shape x-pointer-shape)
return-window)
(when (boundp 'x-pointer-xterm)
(setq x-pointer-shape x-pointer-xterm))
(setq return-window (select-window (funcall special-display-function buf args)))
(raise-frame)
(setq x-pointer-shape old-ptr-shape)
return-window))
(defun 1on1-display-*Completions*-frame (buf &optional args)
"Display *Completions* buffer in its own frame.
`special-display-function' is used to do the actual displaying.
Completion input events are redirected to `1on1-minibuffer-frame'.
BUF and ARGS are the arguments to `special-display-function'."
(let ((old-ptr-shape x-pointer-shape)
return-window)
(when (and 1on1-*Completions*-frame-flag (boundp 'x-pointer-box-spiral))
(setq x-pointer-shape x-pointer-box-spiral))
(setq return-window (select-window (funcall special-display-function buf args)))
(when (fboundp 'zoom-frm-out)
(condition-case nil (progn (zoom-frm-out) (zoom-frm-out)) ; In `zoom-frm.el'.
(error nil)))
;; We reposition frame this way, instead of binding `special-display-frame-alist'
;; with this value, because `after-make-frame-functions' might resize frame.
(when 1on1-*Completions*-frame-at-right-flag
(modify-frame-parameters
(selected-frame) ; Hard-code 7 here - what does it depend on?
`((left . ,(- (x-display-pixel-width) (+ (frame-pixel-width) 7))))))
(raise-frame)
(when (boundp '1on1-minibuffer-frame)
(redirect-frame-focus (selected-frame) 1on1-minibuffer-frame))
(when (and 1on1-*Completions*-frame-flag (boundp 'x-pointer-box-spiral))
(setq x-pointer-shape old-ptr-shape))
return-window))
(defun 1on1-set-minibuffer-frame-top/bottom ()
"Set position of minibuffer frame.
Use `1on1-minibuffer-frame-top/bottom' if non-nil.
Else, place minibuffer at bottom of display."
(when (boundp '1on1-minibuffer-frame)
(modify-frame-parameters
1on1-minibuffer-frame
`((top ,@ (or 1on1-minibuffer-frame-top/bottom
(- (* 2 (frame-char-height 1on1-minibuffer-frame)))))))))
(defun 1on1-set-minibuffer-frame-width ()
"Set width of minibuffer frame, in characters.
Use `1on1-minibuffer-frame-width' if not nil.
Else, set width relative to character size of `1on1-minibuffer-frame'
and display size, and depending on
`1on1-minibuffer-frame-width-percent':
(/ (* 1on1-minibuffer-frame-width-percent (x-display-pixel-width))
(* 100 (frame-char-width 1on1-minibuffer-frame)))"
(when (boundp '1on1-minibuffer-frame)
(set-frame-width
1on1-minibuffer-frame
(or 1on1-minibuffer-frame-width
(/ (* 1on1-minibuffer-frame-width-percent (x-display-pixel-width))
(* 100 (frame-char-width 1on1-minibuffer-frame)))))))
(defun 1on1-color-minibuffer-frame-on-setup ()
"Change background of minibuffer frame to reflect the minibuffer depth.
Use this when increasing the minibuffer recursion depth."
(when (boundp '1on1-minibuffer-frame)
(save-window-excursion
(select-frame 1on1-minibuffer-frame)
(set-background-color 1on1-active-minibuffer-frame-background)
(let ((count (minibuffer-depth)))
(while (> count 1)
(set-background-color (1on1-increment-color-hue ; Change bg hue slightly.
(frame-parameter nil 'background-color)
1on1-color-minibuffer-frame-on-setup-increment))
(setq count (1- count)))))))
(defun 1on1-color-minibuffer-frame-on-exit ()
"Change background of minibuffer frame to reflect the minibuffer depth.
Use this when reducing the minibuffer recursion depth."
(when (boundp '1on1-minibuffer-frame)
(save-window-excursion
(select-frame 1on1-minibuffer-frame)
(if (< (minibuffer-depth) 2)
(set-background-color 1on1-inactive-minibuffer-frame-background)
(set-background-color (1on1-increment-color-hue ; Change bg hue slightly.
(frame-parameter nil 'background-color)
1on1-color-minibuffer-frame-on-exit-increment))))))
;; This is essentially a version of `doremi-increment-color-component' for hue only.
(defun 1on1-increment-color-hue (color increment)
"Increase hue component of COLOR by INCREMENT."
(unless (string-match "#" color) ; Convert color name to #hhh...
(setq color (hexrgb-color-values-to-hex (x-color-values color))))
;; Convert RGB to HSV
(let* ((rgb (x-color-values color))
(red (/ (float (nth 0 rgb)) 65535.0)) ; Convert from 0-65535 to 0.0-1.0
(green (/ (float (nth 1 rgb)) 65535.0))
(blue (/ (float (nth 2 rgb)) 65535.0))
(hsv (hexrgb-rgb-to-hsv red green blue))
(hue (nth 0 hsv))
(saturation (nth 1 hsv))
(value (nth 2 hsv)))
(setq hue (+ hue (/ increment 100.0)))
(when (> hue 1.0) (setq hue (1- hue)))
(hexrgb-color-values-to-hex (mapcar (lambda (x) (floor (* x 65535.0)))
(hexrgb-hsv-to-rgb hue saturation value)))))
(defun 1on1-color-isearch-minibuffer-frame ()
"Use `1on1-isearch-minibuffer-frame-background' for minibuffer."
(and (boundp '1on1-minibuffer-frame)
(save-window-excursion
(select-frame 1on1-minibuffer-frame)
(set-background-color
;; Can also try `x-defined-colors', defined in `x-win.el'.
;; It contains all colors currently supported by X windows.
(if (x-color-defined-p 1on1-isearch-minibuffer-frame-background)
1on1-isearch-minibuffer-frame-background
"white")))))
(defun 1on1-flash-ding-minibuffer-frame (&optional do-not-terminate)
"Ring bell (`ding'), after flashing minibuffer frame, if relevant.
Terminates any keyboard macro executing, unless arg DO-NOT-TERMINATE non-nil."
(flash-ding do-not-terminate (and (boundp '1on1-minibuffer-frame)
1on1-minibuffer-frame)))
(defun 1on1-setup-minibuffer-frame-coloring ()
"Redefine some built-in functions so they color the minibuffer frame.
Functions redefined: `y-or-n-p', `top-level', `abort-recursive-exit'."
(or (fboundp 'old-y-or-n-p)
(fset 'old-y-or-n-p (symbol-function 'y-or-n-p)))
;; REPLACES ORIGINAL (built-in function):
;; Temporarily colors minibuffer frame to "active" color.
;;
(defun y-or-n-p (prompt)
"Ask user a \"y or n\" question. Return t if answer is \"y\".
Takes one argument, which is the string to display to ask the question.
It should end in a space; `y-or-n-p' adds `(y or n) ' to it.
No confirmation of answer is requested; a single character is enough.
Also accepts SPC to mean yes, or DEL to mean no."
(1on1-color-minibuffer-frame-on-setup)
(prog1 (old-y-or-n-p prompt) (1on1-color-minibuffer-frame-on-exit)))
(or (fboundp 'old-top-level)
(fset 'old-top-level (symbol-function 'top-level)))
;; REPLACES ORIGINAL (built-in function):
;; Resets color of minibuffer frame to "inactive" color.
;;
(defun top-level ()
"Exit all recursive editing levels."
(interactive)
(1on1-color-minibuffer-frame-on-exit)
(old-top-level))
(or (fboundp 'old-abort-recursive-edit)
(fset 'old-abort-recursive-edit (symbol-function 'abort-recursive-edit)))
;; REPLACES ORIGINAL (built-in function):
;; Resets color of minibuffer frame to "inactive" color.
;;
(defun abort-recursive-edit ()
"Abort command that requested this recursive edit or minibuffer input."
(interactive)
(1on1-color-minibuffer-frame-on-exit)
(old-abort-recursive-edit)))
(defun 1on1-setup-mode-line ()
"Set up mode-line faces."
(when 1on1-color-mode-line-flag
(set-face-background 'modeline 1on1-active-mode-line-background)
(when (facep 'mode-line-inactive) ; Emacs 22
(set-face-background 'mode-line-inactive 1on1-inactive-mode-line-background))))
(defun 1on1-reset-minibuffer-frame ()
(when 1on1-minibuffer-frame
(set-frame-size 1on1-minibuffer-frame
(frame-width 1on1-minibuffer-frame)
1on1-minibuffer-frame-height)
(1on1-set-minibuffer-frame-top/bottom)))
;; Bind this to some key in the minibuffer completion maps. I use `C-o'.
;;;###autoload
(defun 1on1-fit-minibuffer-frame ()
"Fit the standalone minibuffer frame height to its contents.
Repeat to increase the height by 1.
Bind this in minibuffer keymaps to a key such as `C-o' that you can
use during minibuffer input."
(interactive)
(unless (require 'fit-frame nil t)
(error "You need to load library `fit-frame.el' to use this command"))
;; We could assume the minibuffer frame is `1on1-minibuffer-frame', but we don't.
(when (and (active-minibuffer-window)
(save-selected-window
(select-window (minibuffer-window))
;; We should be able to use just (one-window-p),
;; but an Emacs bug means we need this:
(one-window-p nil 'selected-frame)))
(let* ((frame (save-selected-window
(select-window (minibuffer-window)) (selected-frame)))
(frame-height (frame-height frame)))
(cond ((eq last-command this-command)
(set-frame-height frame (1+ (frame-height frame)))
(1on1-set-minibuffer-frame-top/bottom)
(condition-case nil
(scroll-down (frame-height frame))
(error nil)))
(t
(let* ((beg (1on1-minibuffer-prompt-end))
(frame-width (frame-width frame))
(fit-frame-min-width frame-width)
(window-min-width frame-width)
(fit-frame-max-width frame-width)
(fit-frame-empty-width frame-width)
(fit-frame-empty-special-display-width frame-width)
(fit-frame-min-height frame-height)
(window-min-height frame-height)
(fit-frame-empty-height frame-height)
(fit-frame-empty-special-display-height frame-height))
(fit-frame frame)
(when (>= emacs-major-version 21)
(set-frame-height frame (1+ (frame-height frame)))) ; A little extra.
(1on1-set-minibuffer-frame-top/bottom)
(condition-case nil (scroll-down (frame-height frame)) (error nil))))))))
(defun 1on1-minibuffer-prompt-end ()
"Version of `minibuffer-prompt-end' that works for Emacs 20 and later."
(if (fboundp 'minibuffer-prompt-end) (minibuffer-prompt-end) (point-min)))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; oneonone.el ends here
[-- Attachment #3: hexrgb.el --]
[-- Type: application/octet-stream, Size: 26932 bytes --]
;;; hexrgb.el --- Functions to manipulate colors, including RGB hex strings.
;;
;; Filename: hexrgb.el
;; Description: Functions to manipulate colors, including RGB hex strings.
;; Author: Drew Adams
;; Maintainer: Drew Adams
;; Copyright (C) 2004-2008, Drew Adams, all rights reserved.
;; Created: Mon Sep 20 22:58:45 2004
;; Version: 21.0
;; Last-Updated: Tue Jan 01 13:37:31 2008 (-28800 Pacific Standard Time)
;; By: dradams
;; Update #: 540
;; URL: http://www.emacswiki.org/cgi-bin/wiki/hexrgb.el
;; Keywords: number, hex, rgb, color, background, frames, display
;; Compatibility: GNU Emacs 20.x, GNU Emacs 21.x, GNU Emacs 22.x
;;
;; Features that might be required by this library:
;;
;; None
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Commentary:
;;
;; Functions to manipulate colors, including RGB hex strings.
;;
;; This library provides functions for converting between RGB (red,
;; green, blue) color components and HSV (hue, saturation, value)
;; color components. It helps you convert among Emacs color values
;; (whole numbers from 0 through 65535), RGB and HSV floating-point
;; components (0.0 through 1.0), Emacs color-name strings (such as
;; "blue"), and hex RGB color strings (such as "#FC43A7912").
;;
;; An RGB hex string, such as used as a frame `background-color'
;; property, is a string of 1 + (3 * n) characters, the first of
;; which is "#". The other characters are hexadecimal digits, in
;; three groups representing (from the left): red, green, and blue
;; hex codes.
;;
;; Constants defined here:
;;
;; `hexrgb-defined-colors', `hexrgb-defined-colors-alist'.
;;
;; Commands defined here:
;;
;; `hexrgb-blue', `hexrgb-complement', `hexrgb-green',
;; `hexrgb-hue', `hexrgb-read-color', `hexrgb-red',
;; `hexrgb-saturation', `hexrgb-value'.
;;
;; Non-interactive functions defined here:
;;
;; `hexrgb-approx-equal', `hexrgb-color-name-to-hex',
;; `hexrgb-color-values-to-hex', `hexrgb-color-value-to-float',
;; `hexrgb-float-to-color-value', `hexrgb-hex-char-to-integer',
;; `hexrgb-hex-to-color-values', `hexrgb-hex-to-hsv',
;; `hexrgb-hex-to-rgb', `hexrgb-hsv-to-hex', `hexrgb-hex-to-int',
;; `hexrgb-hsv-to-rgb', `hexrgb-increment-blue',
;; `hexrgb-increment-equal-rgb', `hexrgb-increment-green',
;; `hexrgb-increment-hex', `hexrgb-increment-red',
;; `hexrgb-int-to-hex', `hexrgb-rgb-hex-string-p',
;; `hexrgb-rgb-to-hex', `hexrgb-rgb-to-hsv'.
;;
;;
;; Add this to your initialization file (~/.emacs or ~/_emacs):
;;
;; (require 'hexrgb)
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Change log:
;;
;; 2007/12/30 dadams
;; Added: hexrgb-hex-to-color-values.
;; 2007/10/20 dadams
;; hexrgb-read-color: Treat pseudo colors too (e.g. *point foreground*).
;; 2007/01/21 dadams
;; hexrgb-read-color: Error if empty string (and not allow-empty-name-p).
;; 2006/06/06 dadams
;; Added: hexrgb-defined-colors(-alist). Use instead of (x-defined-colors).
;; hexrgb-(red|green|blue): Added interactive specs.
;; 2006/06/04 dadams
;; hexrgb-read-color: Added optional arg allow-empty-name-p.
;; 2006/06/02 dadams
;; Added: hexrgb-rgb-hex-string-p. Used it.
;; 2006/05/30 dadams
;; Added: hexrgb-hex-to-(hsv|rgb), hexrgb-hsv-to-hex, hexrgb-color-name-to-hex,
;; hexrgb-complement, hexrgb-read-color, hexrgb-hue, hexrgb-saturation,
;; hexrgb-value, hexrgb-red, hexrgb-blue, hexrgb-green.
;; approx-equal: Add optional fuzz factor arguments. Changed the algorithm.
;; Renamed: approx-equal to hexrgb-approx-equal.
;; hexrgb-rgb-to-hsv: Changed test from < to <=: (when (<= hue 0.0)...).
;; hexrgb-hsv-to-rgb: Treat hue = 0.0 (int 0) the same as hue = 1.0 (int 6).
;; hexrgb-rgb-to-hex, hexrgb-increment-hex: Corrected doc strings.
;; 2006/05/22 dadams
;; Added: hexrgb-hsv-to-hex, hexrgb-rgb-to-hex. Require cl.el when byte-compile.
;; 2005/08/09 dadams
;; hexrgb-rgb-to-hsv: Side-stepped Emacs-20 bug in comparing NaN.
;; hexrgb-increment-*: Added optional arg wrap-p.
;; hexrgb-increment-hex: Prevent wrap if not wrap-p.
;; 2005/08/02 dadams
;; hexrgb-rgb-to-hes: Bug fix: If delta is zero, then so are hue and saturation.
;; 2005/06/24 dadams
;; hexrgb-rgb-to-hsv: Bug fix: test for NaN (e.g. on divide by zero).
;; 2005/02/08 dadams
;; hexrgb-hsv-to-rgb: Bug fix (typo: p, q -> pp, qq; added ww).
;; 2005/01/09 dadams
;; hexrgb-int-to-hex: Fixed bug in hexrgb-int-to-hex: nb-digits not respected.
;; Added: hexrgb-hsv-to-rgb, hexrgb-rgb-to-hsv, approx-equal.
;; Renamed old hexrgb-increment-value to hexrgb-increment-equal-rgb.
;; 2005/01/05 dadams
;; hexrgb-int-to-hex: Used a suggestion from Juri Linkov.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; This program is free software; you can redistribute it and/or modify
;; it under the terms of the GNU General Public License as published by
;; the Free Software Foundation; either version 2, or (at your option)
;; any later version.
;; This program is distributed in the hope that it will be useful,
;; but WITHOUT ANY WARRANTY; without even the implied warranty of
;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
;; GNU General Public License for more details.
;; You should have received a copy of the GNU General Public License
;; along with this program; see the file COPYING. If not, write to
;; the Free Software Foundation, Inc., 51 Franklin Street, Fifth
;; Floor, Boston, MA 02110-1301, USA.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;;; Code:
(eval-when-compile (require 'cl)) ;; case; plus, for Emacs < 20: when, unless
;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Not used here, but put here to be available to libraries that use `hexrgb.el'.
;;;###autoload
(defconst hexrgb-defined-colors (eval-when-compile (x-defined-colors))
"List of all supported colors.")
;;;###autoload
(defconst hexrgb-defined-colors-alist (eval-when-compile (mapcar #'list (x-defined-colors)))
"Alist of all supported colors, for use in completion.")
;;;###autoload
(defun hexrgb-read-color (&optional convert-to-RGB-p allow-empty-name-p prompt)
"Read a color name or RGB hex value: #RRRRGGGGBBBB.
Completion is available for color names, but not for RGB hex strings.
If you input an RGB hex string, it must have the form #XXXXXXXXXXXX or
XXXXXXXXXXXX, where each X is a hex digit. The number of Xs must be a
multiple of 3, with the same number of Xs for each of red, green, and
blue. The order is red, green, blue.
In addition to standard color names and RGB hex values, the following
are available as color candidates. In each case, the corresponding
color is used.
* `*copied foreground*' - last copied foreground, if available
* `*copied background*' - last copied background, if available
* `*mouse-2 foreground*' - foreground where you click `mouse-2'
* `*mouse-2 background*' - background where you click `mouse-2'
* `*point foreground*' - foreground under the cursor
* `*point background*' - background under the cursor
\(You can copy a color using eyedropper commands such as
`eyedrop-pick-foreground-at-mouse'.)
Checks input to be sure it represents a valid color. If not, raises
an error (but see exception for empty input with non-nil
ALLOW-EMPTY-NAME-P).
Interactively, or with optional arg CONVERT-TO-RGB-P non-nil, converts
an input color name to an RGB hex string. Returns the RGB hex string.
Optional arg ALLOW-EMPTY-NAME-P controls what happens if you enter an
empty color name (that is, you just hit `RET'). If non-nil, then
`hexrgb-read-color' returns an empty color name, \"\". If nil, then
it raises an error. Programs must test for \"\" if ALLOW-EMPTY-NAME-P
is non-nil. They can then perform an appropriate action in case of
empty input.
Optional arg PROMPT is the prompt. Nil means use a default prompt."
(interactive "p") ; Always convert to RGB interactively.
(let* ((completion-ignore-case t)
(colors (if (fboundp 'eyedrop-foreground-at-point)
(append (and eyedrop-picked-foreground '(("*copied foreground*")))
(and eyedrop-picked-background '(("*copied background*")))
'(("*mouse-2 foreground*") ("*mouse-2 background*")
("*point foreground*") ("*point background*"))
hexrgb-defined-colors-alist)
hexrgb-defined-colors-alist))
(color (completing-read (or prompt "Color (name or #R+G+B+): ") colors))
hex-string)
(when (fboundp 'eyedrop-foreground-at-point)
(cond ((string= "*copied foreground*" color) (setq color eyedrop-picked-foreground))
((string= "*copied background*" color) (setq color eyedrop-picked-background))
((string= "*point foreground*" color) (setq color (eyedrop-foreground-at-point)))
((string= "*point background*" color) (setq color (eyedrop-background-at-point)))
((string= "*mouse-2 foreground*" color)
(setq color (prog1 (eyedrop-foreground-at-mouse
(read-event "Click `mouse-2' to choose foreground color - "))
(read-event)))) ; Discard mouse up event.
((string= "*mouse-2 background*" color)
(setq color (prog1 (eyedrop-background-at-mouse
(read-event "Click `mouse-2' to choose background color - "))
(read-event)))))) ; Discard mouse up event.
(setq hex-string (or (string-match "^#\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+$" color)
(and (string-match "^\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+$" color)
t)))
(if (and allow-empty-name-p (string= "" color))
""
(when (and hex-string (not (eq 0 hex-string)))
(setq color (concat "#" color))) ; No #; add it.
(unless hex-string
(when (or (string= "" color)
(not (if (fboundp 'test-completion) ; Not defined in Emacs 20.
(test-completion color colors)
(try-completion color colors))))
(error "No such color: %S" color))
(when convert-to-RGB-p (setq color (hexrgb-color-name-to-hex color))))
(when (interactive-p) (message "Color: `%s'" color))
color)))
;;;###autoload
(defun hexrgb-rgb-hex-string-p (color &optional laxp)
"Non-nil if COLOR is an RGB string #XXXXXXXXXXXX.
Each X is a hex digit. The number of Xs must be a multiple of 3, with
the same number of Xs for each of red, green, and blue.
Non-nil optional arg LAXP means that the initial `#' is optional. In
that case, for a valid string of hex digits: when # is present 0 is
returned; otherwise, t is returned."
(or (string-match "^#\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+$" color)
(and laxp (string-match "^\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+$" color) t)))
;;;###autoload
(defun hexrgb-complement (color)
"Return the color that is the complement of COLOR."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(let ((red (hexrgb-red color))
(green (hexrgb-green color))
(blue (hexrgb-blue color)))
(setq color (hexrgb-rgb-to-hex (- 1.0 red) (- 1.0 green) (- 1.0 blue))))
(when (interactive-p) (message "Complement: `%s'" color))
color)
;;;###autoload
(defun hexrgb-hue (color)
"Return the hue component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(car (hexrgb-rgb-to-hsv (hexrgb-red color) (hexrgb-green color) (hexrgb-blue color))))
;;;###autoload
(defun hexrgb-saturation (color)
"Return the saturation component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(cadr (hexrgb-rgb-to-hsv (hexrgb-red color) (hexrgb-green color) (hexrgb-blue color))))
;;;###autoload
(defun hexrgb-value (color)
"Return the value component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(caddr (hexrgb-rgb-to-hsv (hexrgb-red color) (hexrgb-green color) (hexrgb-blue color))))
;;;###autoload
(defun hexrgb-red (color)
"Return the red component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(/ (hexrgb-hex-to-int (substring color 1 (1+ (/ (1- (length color)) 3))))
(expt 16.0 (/ (1- (length color)) 3.0))))
;;;###autoload
(defun hexrgb-green (color)
"Return the green component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(let* ((len (/ (1- (length color)) 3))
(start (1+ len)))
(/ (hexrgb-hex-to-int (substring color start (+ start len)))
(expt 16.0 (/ (1- (length color)) 3.0)))))
;;;###autoload
(defun hexrgb-blue (color)
"Return the blue component of COLOR, in range 0 to 1 inclusive.
COLOR is a color name or hex RGB string that starts with \"#\"."
(interactive (list (hexrgb-read-color)))
(setq color (hexrgb-color-name-to-hex color))
(let* ((len (/ (1- (length color)) 3))
(start (+ 1 len len)))
(/ (hexrgb-hex-to-int (substring color start (+ start len)))
(expt 16.0 (/ (1- (length color)) 3.0)))))
;;;###autoload
(defun hexrgb-rgb-to-hsv (red green blue)
"Convert RED, GREEN, BLUE components to HSV (hue, saturation, value).
Each input component is 0.0 to 1.0, inclusive.
Returns a list of HSV components of value 0.0 to 1.0, inclusive."
(let* ((min (min red green blue))
(max (max red green blue))
(value max)
(delta (- max min))
hue saturation)
(if (hexrgb-approx-equal 0.0 delta)
(setq hue 0.0 saturation 0.0) ; Gray scale - no color; only value.
(if (and (condition-case nil
(setq saturation (/ delta max))
(arith-error nil))
(or (< emacs-major-version 21) ; Emacs 20 bug makes next test fail falsely.
(not (equal 0.0e+NaN saturation)))) ; Must be a number, not NaN.
(if (hexrgb-approx-equal 0.0 saturation)
(setq hue 0.0 saturation 0.0) ; Again, no color; only value.
;; Color
(if (hexrgb-approx-equal red max)
(setq hue (/ (- green blue) delta)) ; Between yellow & magenta.
(if (hexrgb-approx-equal green max)
(setq hue (+ 2.0 (/ (- blue red) delta))) ; Between cyan & yellow.
(setq hue (+ 4.0 (/ (- red green) delta))))) ; Between magenta & cyan.
(setq hue (/ hue 6.0))
(when (<= hue 0.0)(setq hue (+ hue 1.0))))
(setq saturation 0.0 hue 0.0))) ; Div by zero (max=0): H:=0, S:=0. (Hue undefined.)
(list hue saturation value)))
;;;###autoload
(defun hexrgb-hsv-to-rgb (hue saturation value)
"Convert HUE, SATURATION, VALUE components to RGB (red, green, blue).
Each input component is 0.0 to 1.0, inclusive.
Returns a list of RGB components of value 0.0 to 1.0, inclusive."
(let (red green blue int-hue fract pp qq tt ww)
(if (hexrgb-approx-equal 0.0 saturation)
(setq red value green value blue value) ; Gray
(setq hue (* hue 6.0) ; Sectors: 0 to 5
int-hue (floor hue)
fract (- hue int-hue)
pp (* value (- 1 saturation))
qq (* value (- 1 (* saturation fract)))
ww (* value (- 1 (* saturation (- 1 (- hue int-hue))))))
(case int-hue
((0 6) (setq red value green ww blue pp))
(1 (setq red qq green value blue pp))
(2 (setq red pp green value blue ww))
(3 (setq red pp green qq blue value))
(4 (setq red ww green pp blue value))
(otherwise (setq red value green pp blue qq))))
(list red green blue)))
;;;###autoload
(defun hexrgb-hsv-to-hex (hue saturation value)
"Return the hex RBG color string for inputs HUE, SATURATION, VALUE.
The inputs are each in the range 0 to 1.
The output string is of the form \"#RRRRGGGGBBBB\"."
(hexrgb-color-values-to-hex
(mapcar (lambda (x) (floor (* x 65535.0))) (hexrgb-hsv-to-rgb hue saturation value))))
;;;###autoload
(defun hexrgb-rgb-to-hex (red green blue)
"Return the hex RBG color string for inputs RED, GREEN, BLUE.
The inputs are each in the range 0 to 1.
The output string is of the form \"#RRRRGGGGBBBB\"."
(hexrgb-color-values-to-hex
(mapcar (lambda (x) (floor (* x 65535.0))) (list red green blue))))
;;;###autoload
(defun hexrgb-hex-to-hsv (color)
"Return a list of HSV (hue, saturation, value) color components.
Each component is a value from 0.0 to 1.0, inclusive.
COLOR is a color name or a hex RGB string that starts with \"#\" and
is followed by an equal number of hex digits for red, green, and blue
components."
(let ((rgb-components (hexrgb-hex-to-rgb color)))
(apply #'hexrgb-rgb-to-hsv rgb-components)))
;;;###autoload
(defun hexrgb-hex-to-rgb (color)
"Return a list of RGB (red, green, blue) color components.
Each component is a value from 0.0 to 1.0, inclusive.
COLOR is a color name or a hex RGB string that starts with \"#\" and
is followed by an equal number of hex digits for red, green, and blue
components."
(unless (hexrgb-rgb-hex-string-p color) (setq color (hexrgb-color-name-to-hex color)))
(let ((len (/ (1- (length color)) 3)))
(list (/ (hexrgb-hex-to-int (substring color 1 (1+ len))) 65535.0)
(/ (hexrgb-hex-to-int (substring color (1+ len) (+ 1 len len))) 65535.0)
(/ (hexrgb-hex-to-int (substring color (+ 1 len len))) 65535.0))))
;;;###autoload
(defun hexrgb-color-name-to-hex (color)
"Return the RGB hex string for the COLOR name, starting with \"#\".
If COLOR is already a string starting with \"#\", then just return it."
(let ((components (x-color-values color)))
(unless components (error "No such color: %S" color))
(unless (hexrgb-rgb-hex-string-p color)
(setq color (hexrgb-color-values-to-hex components))))
color)
;; Just hard-code 4 as the number of hex digits, since `x-color-values'
;; seems to produce appropriate integer values for this value.
;;
;; Color "components" would be better in the name than color "value"
;; but this name follows the Emacs tradition (e.g. `x-color-values',
;; 'ps-color-values', `ps-e-x-color-values').
;;;###autoload
(defun hexrgb-color-values-to-hex (values)
"Convert list of rgb color VALUES to a hex string, #XXXXXXXXXXXX.
Each X in the string is a hexadecimal digit.
Input VALUES is as for the output of `x-color-values'."
(concat "#"
(hexrgb-int-to-hex (nth 0 values) 4) ; red
(hexrgb-int-to-hex (nth 1 values) 4) ; green
(hexrgb-int-to-hex (nth 2 values) 4))) ; blue
;;;###autoload
(defun hexrgb-hex-to-color-values (color)
"Convert hex COLOR to a list of rgb color values.
COLOR is a hex rgb color string, #XXXXXXXXXXXX
Each X in the string is a hexadecimal digit. There are 3N X's, N > 0.
The output list is as for `x-color-values'."
(let* ((hex-strgp (string-match
"^\\(#\\)?\\(\\([a-fA-F0-9][a-fA-F0-9][a-fA-F0-9]\\)+\\)$"
color))
(ndigits (/ (if (eq (match-beginning 1) (match-end 1))
(length color)
(1- (length color)))
3))
red green blue)
(unless hex-strgp (error "Invalid RGB color string: %s" color))
(setq color (substring color (match-beginning 2) (match-end 2))
red (hexrgb-hex-to-int (substring color 0 ndigits))
green (hexrgb-hex-to-int (substring color ndigits (* 2 ndigits)))
blue (hexrgb-hex-to-int (substring color ndigits (* 3 ndigits))))
(list red green blue)))
;;;###autoload
(defun hexrgb-increment-red (hex nb-digits increment &optional wrap-p)
"Increment red value of rgb string HEX by INCREMENT.
String HEX starts with \"#\". Each color is NB-DIGITS hex digits long.
If optional arg WRAP-P is non-nil, then the result wraps around zero.
For example, incrementing \"#FFFFFFFFF\" by 1 will cause it to wrap
around to \"#000000000\"."
(concat "#"
(hexrgb-increment-hex (substring hex 1 (1+ nb-digits)) increment nb-digits wrap-p)
(substring hex (1+ nb-digits) (1+ (* nb-digits 2)))
(substring hex (1+ (* nb-digits 2)))))
;;;###autoload
(defun hexrgb-increment-green (hex nb-digits increment &optional wrap-p)
"Increment green value of rgb string HEX by INCREMENT.
String HEX starts with \"#\". Each color is NB-DIGITS hex digits long.
For example, incrementing \"#FFFFFFFFF\" by 1 will cause it to wrap
around to \"#000000000\"."
(concat
"#" (substring hex 1 (1+ nb-digits))
(hexrgb-increment-hex (substring hex (1+ nb-digits) (1+ (* nb-digits 2)))
increment
nb-digits
wrap-p)
(substring hex (1+ (* nb-digits 2)))))
;;;###autoload
(defun hexrgb-increment-blue (hex nb-digits increment &optional wrap-p)
"Increment blue value of rgb string HEX by INCREMENT.
String HEX starts with \"#\". Each color is NB-DIGITS hex digits long.
For example, incrementing \"#FFFFFFFFF\" by 1 will cause it to wrap
around to \"#000000000\"."
(concat "#" (substring hex 1 (1+ (* nb-digits 2)))
(hexrgb-increment-hex (substring hex (1+ (* nb-digits 2)))
increment
nb-digits
wrap-p)))
;;;###autoload
(defun hexrgb-increment-equal-rgb (hex nb-digits increment &optional wrap-p)
"Increment each color value (r,g,b) of rgb string HEX by INCREMENT.
String HEX starts with \"#\". Each color is NB-DIGITS hex digits long.
For example, incrementing \"#FFFFFFFFF\" by 1 will cause it to wrap
around to \"#000000000\"."
(concat
"#" (hexrgb-increment-hex (substring hex 1 (1+ nb-digits)) increment nb-digits wrap-p)
(hexrgb-increment-hex (substring hex (1+ nb-digits) (1+ (* nb-digits 2)))
increment
nb-digits
wrap-p)
(hexrgb-increment-hex (substring hex (1+ (* nb-digits 2))) increment nb-digits wrap-p)))
;;;###autoload
(defun hexrgb-increment-hex (hex increment nb-digits &optional wrap-p)
"Increment HEX number (a string NB-DIGITS long) by INCREMENT.
For example, incrementing \"FFFFFFFFF\" by 1 will cause it to wrap
around to \"000000000\"."
(let* ((int (hexrgb-hex-to-int hex))
(new-int (+ increment int)))
(if (or wrap-p
(and (>= int 0) ; Not too large for the machine.
(>= new-int 0) ; For the case where increment < 0.
(<= (length (format (concat "%X") new-int)) nb-digits))) ; Not too long.
(hexrgb-int-to-hex new-int nb-digits) ; Use incremented number.
hex))) ; Don't increment.
;;;###autoload
(defun hexrgb-hex-to-int (hex)
"Convert HEX string argument to an integer.
The characters of HEX must be hex characters."
(let* ((factor 1)
(len (length hex))
(indx (1- len))
(int 0))
(while (>= indx 0)
(setq int (+ int (* factor (hexrgb-hex-char-to-integer (aref hex indx)))))
(setq indx (1- indx))
(setq factor (* 16 factor)))
int))
;; From `hexl.el'. This is the same as `hexl-hex-char-to-integer' defined there.
;;;###autoload
(defun hexrgb-hex-char-to-integer (character)
"Take a CHARACTER and return its value as if it were a hex digit."
(if (and (>= character ?0) (<= character ?9))
(- character ?0)
(let ((ch (logior character 32)))
(if (and (>= ch ?a) (<= ch ?f))
(- ch (- ?a 10))
(error "Invalid hex digit `%c'" ch)))))
;; Originally, I used the code from `int-to-hex-string' in `float.el'.
;; This version is thanks to Juri Linkov <juri@jurta.org>.
;;
;;;###autoload
(defun hexrgb-int-to-hex (int &optional nb-digits)
"Convert integer argument INT to a #XXXXXXXXXXXX format hex string.
Each X in the output string is a hexadecimal digit.
NB-DIGITS is the number of hex digits. If INT is too large to be
represented with NB-DIGITS, then the result is truncated from the
left. So, for example, INT=256 and NB-DIGITS=2 returns \"00\", since
the hex equivalent of 256 decimal is 100, which is more than 2 digits."
(setq nb-digits (or nb-digits 4))
(substring (format (concat "%0" (int-to-string nb-digits) "X") int) (- nb-digits)))
;; Inspired by Elisp Info manual, node "Comparison of Numbers".
;;;###autoload
(defun hexrgb-approx-equal (x y &optional rfuzz afuzz)
"Return non-nil if numbers X and Y are approximately equal.
RFUZZ is a relative fuzz factor. AFUZZ is an absolute fuzz factor.
RFUZZ defaults to 1.0e-8. AFUZZ defaults to (/ RFUZZ 10).
The algorithm is:
(< (abs (- X Y)) (+ AFUZZ (* RFUZZ (+ (abs X) (abs Y)))))."
(setq rfuzz (or rfuzz 1.0e-8) afuzz (or afuzz (/ rfuzz 10)))
(< (abs (- x y)) (+ afuzz (* rfuzz (+ (abs x) (abs y))))))
;;;###autoload
(defun hexrgb-color-value-to-float (n)
"Return the floating-point equivalent of color value N.
N must be an integer between 0 and 65535, or else an error is raised."
(unless (and (wholenump n) (<= n 65535))
(error "Not a whole number less than 65536"))
(/ (float n) 65535.0))
;;;###autoload
(defun hexrgb-float-to-color-value (x)
"Return the color value equivalent of floating-point number X.
X must be between 0.0 and 1.0, or else an error is raised."
(unless (and (numberp x) (<= 0.0 x) (<= x 1.0))
(error "Not a floating-point number between 0.0 and 1.0"))
(floor (* x 65535.0)))
;;;;;;;;;;;;;;;;;;;;;;;;;;;
(provide 'hexrgb)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;; hexrgb.el ends here
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
@ 2008-12-28 1:32 Chong Yidong
2008-12-28 8:02 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Chong Yidong @ 2008-12-28 1:32 UTC (permalink / raw)
To: Drew Adams; +Cc: 117
I can't reproduce this using the recipe you gave.
Please try to reduce the size of the test case. One way to do this is
to define a function like this:
(defun check-frame-parameters ()
(let (params (frame-parameters))
(while params
(if (assq (caar params) (cdr params))
(error "Duplicate frame parameter found"))
(setq params (cdr params)))))
and sprinkle (check-frame-parameters) throughout your code. Then turn
on debug-on-error, and see when the error first appears.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-12-28 1:32 Chong Yidong
@ 2008-12-28 8:02 ` Drew Adams
2008-12-28 9:00 ` Chong Yidong
0 siblings, 1 reply; 16+ messages in thread
From: Drew Adams @ 2008-12-28 8:02 UTC (permalink / raw)
To: 'Chong Yidong'; +Cc: 117
> I can't reproduce this using the recipe you gave.
Did you try on MS Windows?
The recipe and code I sent reproduces the problem, for me.
> Please try to reduce the size of the test case. One way to do this is
> to define a function like this:
>
> (defun check-frame-parameters ()
> (let (params (frame-parameters))
> (while params
> (if (assq (caar params) (cdr params))
> (error "Duplicate frame parameter found"))
> (setq params (cdr params)))))
>
> and sprinkle (check-frame-parameters) throughout your code. Then turn
> on debug-on-error, and see when the error first appears.
Please see the test case I sent.
Duplication of frame parameters is only one of the symptoms mentioned, and it
might not even be responsible for the obvious, visual problems I reported.
See also bug #1562 (aka #119) - possibly it's related (dunno). For that bug, the
bug occurs in the C code of `modify-frame-parameters'.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-12-28 8:02 ` Drew Adams
@ 2008-12-28 9:00 ` Chong Yidong
2008-12-28 18:15 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: Chong Yidong @ 2008-12-28 9:00 UTC (permalink / raw)
To: Drew Adams; +Cc: 117
"Drew Adams" <drew.adams@oracle.com> writes:
>> I can't reproduce this using the recipe you gave.
>
> Did you try on MS Windows?
> The recipe and code I sent reproduces the problem, for me.
>
>> Please try to reduce the size of the test case. One way to do this is
>> to define a function like this:
>> ..
>> and sprinkle (check-frame-parameters) throughout your code. Then turn
>> on debug-on-error, and see when the error first appears.
>
> Please see the test case I sent.
I don't have MS Windows available. The purpose of my suggestion is to
find a way to reduce the size of your test case, which makes it easier
for someone who does have MS Windows available to do the debugging. So,
please try doing that.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-12-28 9:00 ` Chong Yidong
@ 2008-12-28 18:15 ` Drew Adams
0 siblings, 0 replies; 16+ messages in thread
From: Drew Adams @ 2008-12-28 18:15 UTC (permalink / raw)
To: 'Chong Yidong'; +Cc: 117
> >> I can't reproduce this using the recipe you gave.
> >
> > Did you try on MS Windows?
> > The recipe and code I sent reproduces the problem, for me.
> >
> >> Please try to reduce the size of the test case. One way
> to do this is
> >> to define a function like this:
> >> ..
> >> and sprinkle (check-frame-parameters) throughout your
> code. Then turn
> >> on debug-on-error, and see when the error first appears.
> >
> > Please see the test case I sent.
>
> I don't have MS Windows available. The purpose of my suggestion is to
> find a way to reduce the size of your test case, which makes it easier
> for someone who does have MS Windows available to do the
> debugging. So, please try doing that.
I will try to take another look.
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
@ 2008-12-28 19:22 grischka
2008-12-28 19:27 ` Drew Adams
0 siblings, 1 reply; 16+ messages in thread
From: grischka @ 2008-12-28 19:22 UTC (permalink / raw)
To: drew.adams; +Cc: 117
As to problems with frame sizing/positioning on windows, you can
try the attached patch. It fixes some of them.
See also bug #1348
http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=1348
Regards.
########################################
--- src/keyboard.c Sun Nov 02 11:46:21 2008
+++ src/keyboard.c Mon Dec 08 03:32:05 2008
@@ -6875,12 +6875,14 @@
int *addr;
int flags;
{
+#ifndef HAVE_NTGUI
/* First of all, have we already counted some input? */
*addr = (!NILP (Vquit_flag) || readable_events (flags));
/* If input is being read as it arrives, and we have none, there is none. */
if (*addr > 0 || (interrupt_input && ! interrupts_deferred))
return;
+#endif
/* Try to read some input and see how much we get. */
gobble_input (0);
@@ -7283,7 +7285,7 @@
void
reinvoke_input_signal ()
{
-#ifdef SIGIO
+#if defined SIGIO || defined HAVE_NTGUI
handle_async_input ();
#endif
}
########################################
########################################
--- src/w32term.c Wed Nov 12 16:51:11 2008
+++ src/w32term.c Mon Dec 08 03:34:23 2008
@@ -4533,7 +4534,7 @@
case SIZE_MAXIMIZED:
case SIZE_RESTORED:
- f->async_visible = 1;
+ f->async_visible = IsWindowVisible(msg.msg.hwnd);
f->async_iconified = 0;
/* wait_reading_process_output will notice this and update
########################################
########################################
--- src/w32xfns.c Fri Jun 27 03:13:38 2008
+++ src/w32xfns.c Sun Dec 07 21:33:07 2008
@@ -268,6 +268,8 @@
lpTail = lpNew;
SetEvent (input_available);
+ PulseEvent (interrupt_handle);
+ interrupt_input_pending = 1;
leave_crit ();
########################################
^ permalink raw reply [flat|nested] 16+ messages in thread
* bug#117: bug 117: messed up frame parameters
2008-12-28 19:22 grischka
@ 2008-12-28 19:27 ` Drew Adams
0 siblings, 0 replies; 16+ messages in thread
From: Drew Adams @ 2008-12-28 19:27 UTC (permalink / raw)
To: 'grischka'; +Cc: 117
> From: grischka Sent: Sunday, December 28, 2008 11:22 AM
> As to problems with frame sizing/positioning on windows, you can
> try the attached patch. It fixes some of them.
>
> See also bug #1348
> http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=1348
Thanks, but I don't build Emacs. If this patch fixes a bug, then let's hope that
it is applied to Emacs. I will then try a newer Windows build when one is
available.
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2008-12-28 19:27 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-07-08 15:02 bug#117: bug 117: messed up frame parameters Drew Adams
2008-07-08 20:54 ` Jason Rumney
2008-07-09 15:27 ` Drew Adams
2008-08-02 20:36 ` Drew Adams
2008-08-02 21:07 ` Jason Rumney
2008-08-02 22:08 ` Drew Adams
2008-08-27 16:41 ` Drew Adams
2008-08-28 15:04 ` Drew Adams
2008-08-30 14:38 ` Drew Adams
2008-10-31 21:05 ` Drew Adams
-- strict thread matches above, loose matches on Subject: below --
2008-12-28 1:32 Chong Yidong
2008-12-28 8:02 ` Drew Adams
2008-12-28 9:00 ` Chong Yidong
2008-12-28 18:15 ` Drew Adams
2008-12-28 19:22 grischka
2008-12-28 19:27 ` Drew Adams
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).