* Emacs notmuch-show consistently reports "End of file during parsing"
@ 2012-05-23 14:23 Tellman
2012-05-23 15:25 ` Tomi Ollila
0 siblings, 1 reply; 7+ messages in thread
From: Tellman @ 2012-05-23 14:23 UTC (permalink / raw)
To: notmuch
I recently installed notmuch on my OS X laptop. Searching works fine--it seems to find all my mail and displays the subject lines, dates, etc., correctly.
However, the emacs mode is unable to display the contents of any of the messages. I see the subjects correctly, but when I try to view the actual message, I see: "End of file during parsing" and an empty page.
I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11 installed via MacPorts.
Does anyone have an idea what might be causing this?
Thanks,
--Ed Tellman
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing"
2012-05-23 14:23 Emacs notmuch-show consistently reports "End of file during parsing" Tellman
@ 2012-05-23 15:25 ` Tomi Ollila
2012-05-23 18:34 ` Tellman
0 siblings, 1 reply; 7+ messages in thread
From: Tomi Ollila @ 2012-05-23 15:25 UTC (permalink / raw)
To: Tellman, notmuch
On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
> I recently installed notmuch on my OS X laptop. Searching works fine--it
> seems to find all my mail and displays the subject lines, dates, etc.,
> correctly.
> However, the emacs mode is unable to display the contents of any of the
> messages. I see the subjects correctly, but when I try to view the
> actual message, I see: "End of file during parsing" and an empty page.
> I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11
> installed via MacPorts.
>
> Does anyone have an idea what might be causing this?
What version of gmime is installed ?
Do the following on command line (the l33t... below is
actually a date 'Tue May 15 23:10:56 2012 UTC').
notmuch search --output=threads 1337123456..
and then execute
notmuch show --format=json thread:000000000000XXXX
(take the XXX from the thread list outputted before
-- try many of those and see whether something fails
during execution...).
> Thanks,
> --Ed Tellman
Tomi
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing"
2012-05-23 15:25 ` Tomi Ollila
@ 2012-05-23 18:34 ` Tellman
2012-05-24 6:04 ` Tomi Ollila
0 siblings, 1 reply; 7+ messages in thread
From: Tellman @ 2012-05-23 18:34 UTC (permalink / raw)
To: Tomi Ollila; +Cc: notmuch@notmuchmail.org
Thanks for the quick response.
I have gmime 2.4 installed.
I tried the search and show commands and the responses all looked OK to me, although I wasn't quite sure what to look for. I didn't see any error messages.
Here's a sample:
[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]78ca391a1b82:gmime
I tried a bunch of other ones, and they all looked similar.
Thanks,
--Ed
On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote:
> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
>
> > I recently installed notmuch on my OS X laptop. Searching works fine--it
> > seems to find all my mail and displays the subject lines, dates, etc.,
> > correctly.
>
> > However, the emacs mode is unable to display the contents of any of the
> > messages. I see the subjects correctly, but when I try to view the
> > actual message, I see: "End of file during parsing" and an empty page.
>
> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11
> > installed via MacPorts.
> >
> > Does anyone have an idea what might be causing this?
>
> What version of gmime is installed ?
>
> Do the following on command line (the l33t... below is
> actually a date 'Tue May 15 23:10:56 2012 UTC').
>
> notmuch search --output=threads 1337123456..
>
> and then execute
>
> notmuch show --format=json thread:000000000000XXXX
>
> (take the XXX from the thread list outputted before
> -- try many of those and see whether something fails
> during execution...).
>
> > Thanks,
> > --Ed Tellman
>
> Tomi
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing"
2012-05-23 18:34 ` Tellman
@ 2012-05-24 6:04 ` Tomi Ollila
2012-05-25 15:53 ` Tellman
0 siblings, 1 reply; 7+ messages in thread
From: Tomi Ollila @ 2012-05-24 6:04 UTC (permalink / raw)
To: Tellman; +Cc: notmuch@notmuchmail.org
On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
> Thanks for the quick response.
>
> I have gmime 2.4 installed.
Gmime 2.4.x -- what is the value if 'x' :D ?
> I tried the search and show commands and the responses all looked OK to
> me, although I wasn't quite sure what to look for. I didn't see any
> error messages.
> Here's a sample:
>
> (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]78ca391a1b82:gmime
>
> I tried a bunch of other ones, and they all looked similar.
Putting cursor /here (use monospace font ;) and entering C-x C-e parses ......
|
|
V
(json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]
...... the message OK... You could next try to enter
id:"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com"
into your notmuch-hello search bar and see if that message shows ok.
If that does then just some threads makes the parsing fail.
I have had similar experience: when using gmime 2.4.21 some threads
(note: not all) make notmuch segfault. Updating to 2.4.25 fixed that
problem. You may have the same problem or not.
>
> Thanks,
> --Ed
Tomi
>
>
> On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote:
>> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
>>
>> > I recently installed notmuch on my OS X laptop. Searching works fine--it
>> > seems to find all my mail and displays the subject lines, dates, etc.,
>> > correctly.
>>
>> > However, the emacs mode is unable to display the contents of any of the
>> > messages. I see the subjects correctly, but when I try to view the
>> > actual message, I see: "End of file during parsing" and an empty page.
>>
>> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11
>> > installed via MacPorts.
>> >
>> > Does anyone have an idea what might be causing this?
>>
>> What version of gmime is installed ?
>>
>> Do the following on command line (the l33t... below is
>> actually a date 'Tue May 15 23:10:56 2012 UTC').
>>
>> notmuch search --output=threads 1337123456..
>>
>> and then execute
>>
>> notmuch show --format=json thread:000000000000XXXX
>>
>> (take the XXX from the thread list outputted before
>> -- try many of those and see whether something fails
>> during execution...).
>>
>> > Thanks,
>> > --Ed Tellman
>>
>> Tomi
> _______________________________________________
> notmuch mailing list
> notmuch@notmuchmail.org
> http://notmuchmail.org/mailman/listinfo/notmuch
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing"
2012-05-24 6:04 ` Tomi Ollila
@ 2012-05-25 15:53 ` Tellman
2012-05-25 17:03 ` Tomi Ollila
0 siblings, 1 reply; 7+ messages in thread
From: Tellman @ 2012-05-25 15:53 UTC (permalink / raw)
To: Tomi Ollila; +Cc: notmuch@notmuchmail.org
I installed gmime 2.4.28 and notmuch 0.12 and that combination seems to work fine.
I'm not sure what the problem was, but it seems OK now.
Thanks for your help.
--Ed
On Wed, May 23, 2012 at 11:04:32PM -0700, Tomi Ollila wrote:
> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
>
> > Thanks for the quick response.
> >
> > I have gmime 2.4 installed.
>
> Gmime 2.4.x -- what is the value if 'x' :D ?
>
> > I tried the search and show commands and the responses all looked OK to
> > me, although I wasn't quite sure what to look for. I didn't see any
> > error messages.
>
> > Here's a sample:
> >
> > (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]78ca391a1b82:gmime
> >
> > I tried a bunch of other ones, and they all looked similar.
>
>
> Putting cursor /here (use monospace font ;) and entering C-x C-e parses ......
> |
> |
> V
> (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]
>
> ...... the message OK... You could next try to enter
>
> id:"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com"
>
> into your notmuch-hello search bar and see if that message shows ok.
>
> If that does then just some threads makes the parsing fail.
>
> I have had similar experience: when using gmime 2.4.21 some threads
> (note: not all) make notmuch segfault. Updating to 2.4.25 fixed that
> problem. You may have the same problem or not.
>
> >
> > Thanks,
> > --Ed
>
> Tomi
>
> >
> >
> > On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote:
> >> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
> >>
> >> > I recently installed notmuch on my OS X laptop. Searching works fine--it
> >> > seems to find all my mail and displays the subject lines, dates, etc.,
> >> > correctly.
> >>
> >> > However, the emacs mode is unable to display the contents of any of the
> >> > messages. I see the subjects correctly, but when I try to view the
> >> > actual message, I see: "End of file during parsing" and an empty page.
> >>
> >> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11
> >> > installed via MacPorts.
> >> >
> >> > Does anyone have an idea what might be causing this?
> >>
> >> What version of gmime is installed ?
> >>
> >> Do the following on command line (the l33t... below is
> >> actually a date 'Tue May 15 23:10:56 2012 UTC').
> >>
> >> notmuch search --output=threads 1337123456..
> >>
> >> and then execute
> >>
> >> notmuch show --format=json thread:000000000000XXXX
> >>
> >> (take the XXX from the thread list outputted before
> >> -- try many of those and see whether something fails
> >> during execution...).
> >>
> >> > Thanks,
> >> > --Ed Tellman
> >>
> >> Tomi
> > _______________________________________________
> > notmuch mailing list
> > notmuch@notmuchmail.org
> > http://notmuchmail.org/mailman/listinfo/notmuch
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing"
2012-05-25 15:53 ` Tellman
@ 2012-05-25 17:03 ` Tomi Ollila
2012-05-25 17:08 ` Tellman, Ed
0 siblings, 1 reply; 7+ messages in thread
From: Tomi Ollila @ 2012-05-25 17:03 UTC (permalink / raw)
To: Tellman; +Cc: notmuch@notmuchmail.org
On Fri, May 25 2012, Tellman <edwint@amazon.com> wrote:
> I installed gmime 2.4.28 and notmuch 0.12 and that combination seems to
> work fine.
>
> I'm not sure what the problem was, but it seems OK now.
Good that it works for you!
Do you happen to know which version of gmime you were using previously --
http://www.macports.org/ports.php?by=library&substr=gmime shows version
2.4.23 (but that is just something that internet search presented me)
> Thanks for your help.
>
> --Ed
Tomi
>
> On Wed, May 23, 2012 at 11:04:32PM -0700, Tomi Ollila wrote:
>> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
>>
>> > Thanks for the quick response.
>> >
>> > I have gmime 2.4 installed.
>>
>> Gmime 2.4.x -- what is the value if 'x' :D ?
>>
>> > I tried the search and show commands and the responses all looked OK to
>> > me, although I wasn't quite sure what to look for. I didn't see any
>> > error messages.
>>
>> > Here's a sample:
>> >
>> > (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]78ca391a1b82:gmime
>> >
>> > I tried a bunch of other ones, and they all looked similar.
>>
>>
>> Putting cursor /here (use monospace font ;) and entering C-x C-e parses ......
>> |
>> |
>> V
>> (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]
>>
>> ...... the message OK... You could next try to enter
>>
>> id:"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com"
>>
>> into your notmuch-hello search bar and see if that message shows ok.
>>
>> If that does then just some threads makes the parsing fail.
>>
>> I have had similar experience: when using gmime 2.4.21 some threads
>> (note: not all) make notmuch segfault. Updating to 2.4.25 fixed that
>> problem. You may have the same problem or not.
>>
>> >
>> > Thanks,
>> > --Ed
>>
>> Tomi
>>
>> >
>> >
>> > On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote:
>> >> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
>> >>
>> >> > I recently installed notmuch on my OS X laptop. Searching works fine--it
>> >> > seems to find all my mail and displays the subject lines, dates, etc.,
>> >> > correctly.
>> >>
>> >> > However, the emacs mode is unable to display the contents of any of the
>> >> > messages. I see the subjects correctly, but when I try to view the
>> >> > actual message, I see: "End of file during parsing" and an empty page.
>> >>
>> >> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11
>> >> > installed via MacPorts.
>> >> >
>> >> > Does anyone have an idea what might be causing this?
>> >>
>> >> What version of gmime is installed ?
>> >>
>> >> Do the following on command line (the l33t... below is
>> >> actually a date 'Tue May 15 23:10:56 2012 UTC').
>> >>
>> >> notmuch search --output=threads 1337123456..
>> >>
>> >> and then execute
>> >>
>> >> notmuch show --format=json thread:000000000000XXXX
>> >>
>> >> (take the XXX from the thread list outputted before
>> >> -- try many of those and see whether something fails
>> >> during execution...).
>> >>
>> >> > Thanks,
>> >> > --Ed Tellman
>> >>
>> >> Tomi
>> > _______________________________________________
>> > notmuch mailing list
>> > notmuch@notmuchmail.org
>> > http://notmuchmail.org/mailman/listinfo/notmuch
> _______________________________________________
> notmuch mailing list
> notmuch@notmuchmail.org
> http://notmuchmail.org/mailman/listinfo/notmuch
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing"
2012-05-25 17:03 ` Tomi Ollila
@ 2012-05-25 17:08 ` Tellman, Ed
0 siblings, 0 replies; 7+ messages in thread
From: Tellman, Ed @ 2012-05-25 17:08 UTC (permalink / raw)
To: Tomi Ollila; +Cc: notmuch@notmuchmail.org
Unfortunately, I didn't check before I replaced it. I just removed the
one from mac-ports, got the most recent 2.4 version and compiled it from
source.
I also installed notmuch 0.12 instead of 0.11, so that may have been what
fixed things.
Sorry, I didn't do it more systematically to help identify the actual
problem.
--Ed
On 5/25/12 10:03 AM, "Tomi Ollila" <tomi.ollila@iki.fi> wrote:
>On Fri, May 25 2012, Tellman <edwint@amazon.com> wrote:
>
>> I installed gmime 2.4.28 and notmuch 0.12 and that combination seems to
>> work fine.
>>
>> I'm not sure what the problem was, but it seems OK now.
>
>Good that it works for you!
>
>Do you happen to know which version of gmime you were using previously --
>http://www.macports.org/ports.php?by=library&substr=gmime shows version
>2.4.23 (but that is just something that internet search presented me)
>
>> Thanks for your help.
>>
>> --Ed
>
>Tomi
>
>
>>
>> On Wed, May 23, 2012 at 11:04:32PM -0700, Tomi Ollila wrote:
>>> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
>>>
>>> > Thanks for the quick response.
>>> >
>>> > I have gmime 2.4 installed.
>>>
>>> Gmime 2.4.x -- what is the value if 'x' :D ?
>>>
>>> > I tried the search and show commands and the responses all looked OK
>>>to
>>> > me, although I wasn't quite sure what to look for. I didn't see any
>>> > error messages.
>>>
>>> > Here's a sample:
>>> >
>>> > (json-read)[[[{"id":
>>>"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true,
>>>"filename":
>>>"/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82
>>>.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest.
>>>17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed
>>>Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "",
>>>"Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id":
>>>1, "content-type": "text/plain", "content": "hi\n"}]},
>>>[]]]]78ca391a1b82:gmime
>>> >
>>> > I tried a bunch of other ones, and they all looked similar.
>>>
>>>
>>> Putting cursor /here (use monospace font ;) and entering C-x C-e
>>>parses ......
>>> |
>>> |
>>> V
>>> (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com",
>>>"match": true, "filename":
>>>"/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82
>>>.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest.
>>>17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed
>>>Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "",
>>>"Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id":
>>>1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]
>>>
>>> ...... the message OK... You could next try to enter
>>>
>>> id:"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com"
>>>
>>> into your notmuch-hello search bar and see if that message shows ok.
>>>
>>> If that does then just some threads makes the parsing fail.
>>>
>>> I have had similar experience: when using gmime 2.4.21 some threads
>>> (note: not all) make notmuch segfault. Updating to 2.4.25 fixed that
>>> problem. You may have the same problem or not.
>>>
>>> >
>>> > Thanks,
>>> > --Ed
>>>
>>> Tomi
>>>
>>> >
>>> >
>>> > On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote:
>>> >> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote:
>>> >>
>>> >> > I recently installed notmuch on my OS X laptop. Searching works
>>>fine--it
>>> >> > seems to find all my mail and displays the subject lines, dates,
>>>etc.,
>>> >> > correctly.
>>> >>
>>> >> > However, the emacs mode is unable to display the contents of any
>>>of the
>>> >> > messages. I see the subjects correctly, but when I try to view
>>>the
>>> >> > actual message, I see: "End of file during parsing" and an empty
>>>page.
>>> >>
>>> >> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version
>>>0.11
>>> >> > installed via MacPorts.
>>> >> >
>>> >> > Does anyone have an idea what might be causing this?
>>> >>
>>> >> What version of gmime is installed ?
>>> >>
>>> >> Do the following on command line (the l33t... below is
>>> >> actually a date 'Tue May 15 23:10:56 2012 UTC').
>>> >>
>>> >> notmuch search --output=threads 1337123456..
>>> >>
>>> >> and then execute
>>> >>
>>> >> notmuch show --format=json thread:000000000000XXXX
>>> >>
>>> >> (take the XXX from the thread list outputted before
>>> >> -- try many of those and see whether something fails
>>> >> during execution...).
>>> >>
>>> >> > Thanks,
>>> >> > --Ed Tellman
>>> >>
>>> >> Tomi
>>> > _______________________________________________
>>> > notmuch mailing list
>>> > notmuch@notmuchmail.org
>>> > http://notmuchmail.org/mailman/listinfo/notmuch
>> _______________________________________________
>> notmuch mailing list
>> notmuch@notmuchmail.org
>> http://notmuchmail.org/mailman/listinfo/notmuch
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-05-25 17:08 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-23 14:23 Emacs notmuch-show consistently reports "End of file during parsing" Tellman
2012-05-23 15:25 ` Tomi Ollila
2012-05-23 18:34 ` Tellman
2012-05-24 6:04 ` Tomi Ollila
2012-05-25 15:53 ` Tellman
2012-05-25 17:03 ` Tomi Ollila
2012-05-25 17:08 ` Tellman, Ed
Code repositories for project(s) associated with this public inbox
https://yhetil.org/notmuch.git/
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).