[bug#53878] [PATCH v2 15/15] gnu: racket: Update to 8.4.

[Liliana Marie Prikler <liliana.prikler@ist.tugraz.at>]

Hi,

Am Donnerstag, dem 17.02.2022 um 15:50 -0500 schrieb Philip McGrath:
> -;; Commentary:
> -;;
> -;; Here's how bootstrapping minimal Racket works:
> -;;
> -;;   - Racket BC [CGC] can be built with only a C compiler (except
> for
> -;;     one caveat discussed below).
> -;;   - Racket BC [3M] needs an existing Racket to run "xform",
> -;;     which transforms its own C source code to add additional
> annotations
> -;;     for the precise garbage collector.
> -;;   - Racket CS needs (bootfiles for) Racket's fork of Chez Scheme.
> -;;     It also needs an existing Racket to compile Racket-
> implemented
> -;;     parts of the runtime system to R6RS libraries.
> -;;   - Chez Scheme also needs bootfiles for itself, but Racket can
> simulate
> -;;     enough of Chez Scheme to load Racket's fork of the Chez
> Scheme compiler
> -;;     purely from source into Racket and apply the compiler to
> itself,
> -;;     producing the needed bootfiles (albeit very slowly).
> -;;     Any variant of Racket since version 7.1 can run the
> simulation.
> -;;
> -;; So, we build CGC to build 3M to build bootfiles and CS.
> -;;
> -;; One remaining bootstrapping limitation is that Racket's reader,
> module
> -;; system, and macro expander are implemented in Racket. For Racket
> CS,
> -;; they are compiled to R6RS libraries as discussed above. This note
> from the
> -;; README file applies to all such subsystems:
> -;;
> -;;     The Racket version must be practically the same as the
> current Racket
> -;;     verson, although it can be the Racket BC implementation
> (instead of
> -;;     the Racket CS implementation).
> -;;
> -;;     Unlike Chez Scheme boot files, the files generated in
> "schemified"
> -;;     are human-readable and -editable Scheme code. That provides a
> way
> -;;     out of bootstrapping black holes, even without BC.
> -;;
> -;; However, other Racket subsystems implemented in Racket for Racket
> CS
> -;; use older C implementations for Racket BC, whereas the reader,
> expander,
> -;; and module system were completely replaced with the Racket
> implementation
> -;; as of Racket 7.0.
> -;;
> -;; For Racket BC, the compiled "linklet" s-expressions (primitive
> modules)
> -;; are embeded in C as a static string constant. Eventually, they
> are further
> -;; compiled by the C-implemented Racket BC bytecode and JIT
> compilers.
> -;; (On platforms where Racket BC's JIT is not supported, yet another
> compiler
> -;; instead compiles the linklets to C code, but this is not a
> bootstrapping
> -;; issue.)
I think it'd be clearer if this commentary was moved along with the
bootstrapping code.  Is there a reason why we can't use (racket-vm-for-
system) before updating Racket to 8.4?  This looks like another of
those "two things at once" patches.
 
>  (define-public racket-minimal
>    (package
>      (name "racket-minimal")
> -    (version "8.3")            ; note: remember to also update
> racket!
> -    (source
> -     (origin
> -       (method git-fetch)
> -       (uri (git-reference
> -             (url "https://github.com/racket/racket")
> -             (commit (string-append "v" version))))
> -       (sha256
> -        "1i1jnv1wb0kanfg47hniafx2vhwjc33qqx66lq7wkf5hbmgsyws3")
> -       (file-name (git-file-name name version))
> -       (patches (search-patches "racket-minimal-sh-via-
> rktio.patch"))
> -       (modules '((guix build utils)))
> -       (snippet
> -        (with-imported-modules '((guix build utils))
> -          #~(begin
> -              ;; Unbundle Chez submodules.
> -              (with-directory-excursion "racket/src/ChezScheme"
> -                ;; Remove bundled libraries (copied from 'chez-
> scheme').
> -                (for-each delete-file-recursively
> -                          '("stex"
> -                            "nanopass"
> -                            "lz4"
> -                            "zlib")))
> -              ;; Unbundle libffi.
> -              (delete-file-recursively
> "racket/src/bc/foreign/libffi"))))))
> -    (inputs
> -     `(;; common to all racket-minimal variants:
> -       ("openssl" ,openssl)
> -       ("sqlite" ,sqlite)
> -       ("sh" ,bash-minimal)
> -       ;; only for CS
> -       ("zlib" ,zlib)
> -       ("zlib:static" ,zlib "static")
> -       ("lz4" ,lz4)
> -       ("lz4:static" ,lz4 "static")))
> -    (native-inputs
> -     `(("bootfiles" ,racket-bootstrap-chez-bootfiles)
> -       ,@(package-native-inputs racket-bootstrap-chez-bootfiles)))
> +    (version (package-version (racket-vm-for-system)))
> +    (source (package-source (racket-vm-for-system)))
> +    ;; For cross-compilation, Matthew Flatt recommends reusing
> +    ;; as much of `raco cross` as possible. So, put that off until
> +    ;; we have a build system for Racket packages.
> +    (inputs (list openssl sqlite (racket-vm-for-system)))
As outlined earlier, I believe Racket should define its version, not
racket-vm-for-system.

> [...]
>  (define-public racket
>    (package
>      (inherit racket-minimal)
>      (name "racket")
> -    (version (package-version racket-minimal)) ; needed for origin
> uri to work
> -    (source
> -     (origin
> -       (method url-fetch)
> -       (uri (map (lambda (base)
> -                   (string-append base version "/racket-src.tgz"))
> -                 %installer-mirrors))
> -       (sha256
> -        (base32
> -         "0jdr0y7scvv2a3sq456ifrgq0yfsbiwavdf2m86zmrapp481mby4"))
> -       (snippet
> -        #~(begin
> -            (use-modules (guix build utils)
> -                         (ice-9 match)
> -                         (ice-9 regex))
> -            ;; unbundle minimal Racket
> -            (for-each delete-file-recursively
> -                      '("collects"
> -                        "doc"
> -                        "etc"
> -                        "README"
> -                        "src"))
> -            ;; unbundle package sources included elsewhere
> -            (with-directory-excursion "share/pkgs"
> -              (for-each delete-file-recursively
> -                        '#+%main-repo-main-distribution-pkgs))
> -            #t))))
> +    (source #f)
Why?
>      (inputs
> -     `(("cairo" ,cairo)
> -       ("fontconfig" ,fontconfig)
> -       ("glib" ,glib)
> -       ("glu" ,glu)
> -       ("gmp" ,gmp)
> -       ("gtk+" ,gtk+)                   ; propagates gdk-pixbuf+svg
> -       ("libjpeg" ,libjpeg-turbo)
> -       ("libpng" ,libpng)
> -       ("libx11" ,libx11)
> -       ("mesa" ,mesa)
> -       ("mpfr" ,mpfr)
> -       ("pango" ,pango)
> -       ("unixodbc" ,unixodbc)
> -       ("libedit" ,libedit)))
> -    (native-inputs
> -     `(("racket" ,racket-minimal)
> -       ("extend-layer" ,extend-layer)
> -       ("main-repo" ,(package-source racket-minimal))))
> +     (list cairo
> +           fontconfig
> +           glib
> +           glu
> +           gmp
> +           gtk+ ;; propagates gdk-pixbuf+svg
> +           libjpeg-turbo
> +           libpng
> +           libx11 ;; ?? wayland ??
> +           mesa
> +           mpfr
> +           pango
> +           unixodbc
> +           libedit ;; TODO reconsider in light of expeditor and
> readline-gpl
> +           racket-minimal ;; <-- TODO non-tethered layer
> +           (racket-vm-for-system)))
>      (arguments
> -     `(#:phases
> -       (modify-phases %standard-phases
> -         (add-before 'configure 'unpack-packages
> -           (let ((unpack (assoc-ref %standard-phases 'unpack)))
> -             (lambda* (#:key  native-inputs inputs outputs #:allow-
> other-keys)
> -               (let* ((racket (assoc-ref (or native-inputs inputs)
> "racket"))
> -                      (prefix (assoc-ref outputs "out"))
> -                      (pkgs-dir (string-append prefix
> "/share/racket/pkgs")))
> -                 (mkdir-p pkgs-dir)
> -                 (copy-recursively
> -                  "share/links.rktd"
> -                  (string-append prefix "/share/racket/links.rktd"))
> -                 (copy-recursively "share/pkgs" pkgs-dir)
> -                 ;; NOTE: unpack changes the working directory
> -                 (unpack #:source (assoc-ref (or native-inputs
> inputs)
> -                                             "main-repo"))
> -                 (for-each (lambda (pkg)
> -                             (define dest (string-append pkgs-dir
> "/" pkg))
> -                             (mkdir-p dest)
> -                             (copy-recursively (string-append
> "pkgs/" pkg)
> -                                               dest))
> -                           ',%main-repo-main-distribution-pkgs)
> -                 #t))))
> -         (replace 'configure
> -           (lambda* (#:key native-inputs inputs outputs #:allow-
> other-keys)
> -             (let ((racket (assoc-ref (or native-inputs inputs)
> "racket"))
> -                   (prefix (assoc-ref outputs "out")))
> -               (apply invoke
> -                      (string-append racket "/bin/racket")
> -                      (assoc-ref inputs "extend-layer")
> -                      racket
> -                      prefix
> -                      (map
> -                       (lambda (lib)
> -                         (string-append (assoc-ref inputs lib)
> "/lib"))
> -                       '("cairo"
> -                         "fontconfig"
> -                         "glib"
> -                         "glu"
> -                         "gmp"
> -                         "gtk+"
> -                         "libjpeg"
> -                         "libpng"
> -                         "libx11"
> -                         "mesa"
> -                         "mpfr"
> -                         "pango"
> -                         "unixodbc"
> -                         "libedit")))
> -               #t)))
> -         (replace 'build
> -           (lambda* (#:key native-inputs inputs outputs #:allow-
> other-keys)
> -             (invoke (string-append (assoc-ref (or native-inputs
> inputs)
> -                                               "racket")
> -                                    "/bin/racket")
> -                     "--config"
> -                     (string-append (assoc-ref outputs "out")
> -                                    "/etc/racket")
> -                     "-l"
> -                     "raco"
> -                     "setup")
> -             #t))
> -         (delete 'install))
> -       ;; we still don't have these:
> -       #:tests? #f))
> +     (substitute-keyword-arguments (package-arguments racket-
> minimal)
> +       ((#:configure-flags _ '())
> +        #~`("--tethered"
> +            "--extra-foreign-lib-search-dirs"
> +            ,(format #f "~s"
> +                     '(#$@(map (lambda (name)
> +                                 (cond
> +                                  ((this-package-input name)
> +                                   => (cut file-append <> "/lib"))
> +                                  (else
> +                                   (raise-exception
> +                                    (make-exception
> +                                     (make-assertion-failure)
> +                                     (make-exception-with-message
> +                                      "missing input to the 'racket'
> package")
> +                                     (make-exception-with-irritants
> +                                      (list name)))))))
> +                               '("cairo"
> +                                 "fontconfig-minimal" ;; aka
> fontconfig
> +                                 "glib"
> +                                 "glu"
> +                                 "gmp"
> +                                 "gtk+"
> +                                 "libjpeg-turbo"
> +                                 "libpng"
> +                                 "libx11"
> +                                 "mesa"
> +                                 "mpfr"
> +                                 "pango"
> +                                 "unixodbc"
> +                                 "libedit"))))))
> +       ((#:make-flags _ '())
> +        #~`("main-distribution"))
> +       ((#:phases parent-phases #~%standard-phases)
> +        #~(modify-phases #$parent-phases
> +            (delete 'unpack)
> +            (replace 'build
> +              (lambda args
> +                (mkdir-p (string-append #$output
> "/lib/racket/pkgs"))
> +                (for-each
> +                 (match-lambda
> +                   ((name src)
> +                    (copy-recursively
> +                     src
> +                     (string-append #$output "/lib/racket/pkgs/"
> name))))
> +                 '(#$@main-distribution-packages))))))))
>      (synopsis "Programmable programming language in the Scheme
> family")
>      (description
>       "Racket is a general-purpose programming language in the Scheme
> family,
> @@ -539,82 +224,899 @@ (define dest (string-append pkgs-dir "/" pkg))
>  DrRacket IDE, libraries for GUI and web programming, and
> implementations of
>  languages such as Typed Racket, R5RS and R6RS Scheme, Algol 60, and
> Datalog.")))
This looks like a very weird way of phrasing union-build.  Is there a
reason to do this rather than union-build?


Cheers