all messages for Guix-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
blob 80bfaf0896cf3ad3ab9c8ff901b13b8f54da68d3 24306 bytes (raw)
name: gnu/packages/raspberry-pi.scm 	 # note: path name is non-authoritative(*)

  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
 
;;; GNU Guix --- Functional package management for GNU
;;; Copyright © 2020 Danny Milosavljevic <dannym@scratchpost.org>
;;; Copyright © 2021 Stefan <stefan-guix@vodafonemail.de>
;;; Copyright © 2022, 2023 Maxim Cournoyer <maxim.cournoyer@gmail.com>
;;;
;;; This file is part of GNU Guix.
;;;
;;; GNU Guix is free software; you can redistribute it and/or modify it
;;; under the terms of the GNU General Public License as published by
;;; the Free Software Foundation; either version 3 of the License, or (at
;;; your option) any later version.
;;;
;;; GNU Guix is distributed in the hope that it will be useful, but
;;; WITHOUT ANY WARRANTY; without even the implied warranty of
;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
;;; GNU General Public License for more details.
;;;
;;; You should have received a copy of the GNU General Public License
;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.

(define-module (gnu packages raspberry-pi)
  #:use-module (gnu bootloader)
  #:use-module (gnu bootloader grub)
  #:use-module (gnu packages)
  #:use-module (gnu packages admin)
  #:use-module (gnu packages algebra)
  #:use-module (gnu packages backup)
  #:use-module (gnu packages base)
  #:use-module (gnu packages bash)
  #:use-module (gnu packages bootloaders)
  #:use-module (gnu packages commencement)
  #:use-module (gnu packages cross-base)
  #:use-module (gnu packages curl)
  #:use-module (gnu packages documentation)
  #:use-module (gnu packages embedded)
  #:use-module (gnu packages file)
  #:use-module (gnu packages gcc)
  #:use-module (gnu packages guile)
  #:use-module (gnu packages linux)
  #:use-module (gnu packages pkg-config)
  #:use-module (gnu packages qt)
  #:use-module (gnu packages tls)
  #:use-module (guix build-system cmake)
  #:use-module (guix build-system copy)
  #:use-module (guix build-system gnu)
  #:use-module (guix build-system qt)
  #:use-module (guix download)
  #:use-module (guix git-download)
  #:use-module ((guix licenses) #:prefix license:)
  #:use-module (guix packages)
  #:use-module (guix gexp)
  #:use-module (guix store)
  #:use-module (guix monads)
  #:use-module (guix utils)
  #:use-module (srfi srfi-1)
  #:use-module (srfi srfi-2)
  #:use-module (srfi srfi-26)
  #:use-module (ice-9 match)
  #:export (make-raspi-bcm28-dtbs
            raspi-config-file
            raspi-custom-txt))

(define-public bcm2835
  (package
    (name "bcm2835")
    (version "1.64")
    (source (origin
              (method url-fetch)
              (uri (string-append
                    "http://www.airspayce.com/mikem/bcm2835/bcm2835-"
                    version ".tar.gz"))
              (sha256
               (base32
                "06s81540iz4vsh0cm6jwah2x0hih79v42pfa4pgr8kcbv56158h6"))))
    (build-system gnu-build-system)
    (arguments
     `(#:tests? #f))    ; Would need to be root
    ;; doc/html docs would not be installed anyway.
    ;(native-inputs
    ; `(("doxygen" ,doxygen)))
    (synopsis "C library for Broadcom BCM 2835 as used in Raspberry Pi")
    (description "This package provides a C library for Broadcom BCM 2835 as
used in the Raspberry Pi")
    (home-page "https://www.airspayce.com/mikem/bcm2835/")
    (supported-systems '("armhf-linux" "aarch64-linux"))
    (license license:gpl3)))

(define raspi-gpio
  (let ((commit "6d0769ac04760b6e9f33b4aa1f11c682237bf368")
        (revision "1"))
    (package
      (name "raspi-gpio")
      (version (git-version "0.1" revision commit))
      (source (origin
                (method git-fetch)
                (uri (git-reference
                      (url "https://github.com/RPi-Distro/raspi-gpio")
                      (commit commit)))
                (file-name (git-file-name name version))
                (sha256
                 (base32
                  "1fia1ma586hwhpda0jz86j6i55andq0wncbhzhzvhf7yc773cpi4"))))
      (build-system gnu-build-system)
      (synopsis "State dumper for BCM270x GPIOs")
      (description "Tool to help debug / hack at the BCM283x GPIO. You can dump
  the state of a GPIO or (all GPIOs). You can change a GPIO mode and pulls (and
  level if set as an output).  Beware this tool writes directly to the BCM283x
  GPIO reisters, ignoring anything else that may be using them (like Linux
  drivers).")
      (home-page "https://github.com/RPi-Distro/raspi-gpio")
      (supported-systems '("armhf-linux" "aarch64-linux"))
      (license license:bsd-3))))

(define %rpi-open-firmware-version "0.1")
(define %rpi-open-firmware-origin
  (origin
   (method git-fetch)
   (uri (git-reference
         (url "https://github.com/librerpi/rpi-open-firmware")
         (commit "6be45466e0be437a1b0b3512a86f3d9627217006")))
   (file-name "rpi-open-firmware-checkout")
   (sha256
    (base32 "1wyxvv62i3rjicg4hd94pzbgpadinnrgs27sk39md706mm0qixbh"))))

(define-public raspi-arm-chainloader
  (package
    (name "raspi-arm-chainloader")
    (version %rpi-open-firmware-version)
    (source %rpi-open-firmware-origin)
    (build-system gnu-build-system)
    (arguments
     `(#:tests? #f                   ; No tests exist
       #:phases
       (modify-phases %standard-phases
         (delete 'configure)
         (add-before 'build 'setenv
           (lambda _
             (setenv "CC" "arm-none-eabi-gcc")
             (setenv "CXX" "arm-none-eabi-g++")
             (setenv "AS" "arm-none-eabi-as")
             (setenv "OBJCOPY" "arm-none-eabi-objcopy")
             (setenv "BAREMETAL" "1")
             #t))
         (add-after 'setenv 'build-tlsf
           (lambda _
             (with-directory-excursion "tlsf"
               ;; Note: Adding "-I../common -I../notc/include".
               (invoke "make"
                       "CFLAGS=-mtune=arm1176jzf-s -march=armv6zk -mfpu=vfp -mfloat-abi=softfp -I../common -I../notc/include"))))
         (add-after 'build-tlsf 'build-common
           (lambda _
             (with-directory-excursion "common"
               (invoke "make"
                       ;; Note: Adding "-I.. -I../notc/include".
                       "ARMCFLAGS=-mtune=arm1176jzf-s -march=armv6zk -marm -I.. -I../notc/include"))))
         (add-after 'build-common 'build-notc
           (lambda _
             (with-directory-excursion "notc"
               (invoke "make"))))
         (add-after 'build-notc 'chdir
           (lambda _
             (chdir "arm_chainloader")
             (substitute* "Makefile"
              (("-I[.][.]/")
               "-I../common -I../common/include -I../notc/include -I../")
              (("-ltlsf")
               "-L../common -L../notc -L../tlsf -ltlsf"))
             #t))
         (replace 'install
           (lambda* (#:key outputs #:allow-other-keys)
             (let* ((out (assoc-ref outputs "out"))
                    (libexec (string-append out "/libexec")))
               (mkdir-p libexec)
               (install-file "build/arm_chainloader.elf" libexec)
               (install-file "build/arm_chainloader.map" libexec)
               (install-file "build/arm_chainloader.bin" libexec)
               #t))))))
    (native-inputs
     `(("binutils" ,(cross-binutils "arm-none-eabi"))
       ("gcc" ,(make-gcc-arm-none-eabi-6))))
    (inputs
     `())
    (synopsis "Raspberry Pi ARM bootloader")
    (description "This package provides a bootloader for the ARM part of a
Raspberry Pi.  Note: It does not work on Raspberry Pi 1.")
    (home-page "https://github.com/librerpi/rpi-open-firmware/")
    (license license:gpl2+)))

(define-public raspi-arm64-chainloader
  (package
    (inherit raspi-arm-chainloader)
    (name "raspi-arm64-chainloader")
    ;; These native-inputs especially don't contain a libc.
    (native-inputs
     `(("bash" ,bash)
       ("binutils" ,binutils)
       ("coreutils" ,coreutils)
       ("file" ,file)
       ("ld-wrapper" ,ld-wrapper)
       ("make" ,gnu-make)
       ("gcc" ,gcc-6)
       ("locales" ,glibc-utf8-locales)))
    (inputs
     `())
    (arguments
     `(#:implicit-inputs? #f
       ,@(substitute-keyword-arguments (package-arguments raspi-arm-chainloader)
         ((#:phases phases)
          `(modify-phases ,phases
             (replace 'setenv
               (lambda _
                 (setenv "AS" "as") ; TODO: as-for-target
                 (setenv "OBJCOPY" "objcopy")
                 (setenv "CC" ,(cc-for-target))
                 (setenv "CXX" ,(cc-for-target))
                 (setenv "BAREMETAL" "1")
                 #t))
             (add-after 'setenv 'build-tlsf
               (lambda _
                 (with-directory-excursion "tlsf"
                   (invoke "make"
                           "CFLAGS=-I../common -I../notc/include"))))
             (replace 'build-common
               (lambda _
                 (with-directory-excursion "common"
                   ;; Autodetection uses the CC filename for detecting the architecture.
                   ;; Since we are not using a cross-compiler, we side-step that.
                   (invoke "make"
                           "CFLAGS=-Ilib -I. -Iinclude -ffunction-sections -Wall -g -nostdlib -nostartfiles -ffreestanding -DBAREMETAL"))))
             (replace 'build-notc
               (lambda _
                 (with-directory-excursion "notc"
                   ;; Autodetection uses the CC filename for detecting the architecture.
                   ;; Since we are not using a cross-compiler, we side-step that.
                   (invoke "make"
                           "CFLAGS=-Iinclude -g"))))
             (replace 'chdir
               (lambda _
                 (chdir "arm64")
                 (substitute* "Makefile"
                  (("CFLAGS =")
                   "CFLAGS = -I../common -I../common/include -I../notc/include -I.. -DBAREMETAL")
                  (("-lcommon")
                   "-L../common -L../notc -lcommon"))
                 #t))
         (replace 'install
           (lambda* (#:key outputs #:allow-other-keys)
             (let* ((out (assoc-ref outputs "out"))
                    (libexec (string-append out "/libexec")))
               (mkdir-p libexec)
               (install-file "arm64.elf" libexec)
               (install-file "arm64.map" libexec)
               (install-file "arm64.bin" libexec)
               #t))))))))
    (supported-systems '("aarch64-linux"))))

(define (raspi-config-file name content)
  "Make a configuration file like config.txt for the Raspberry Pi firmware.
CONTENT can be a list of strings, which are concatenated with a newline
character.  Alternatively CONTENT can be a string with the full file content."
  (plain-file
   name
   (if (list? content)
       (string-join content "\n" 'suffix)
       content)))

(define-public %raspi-config-txt
  ;; A config.txt file to start the ARM cores up in 64-bit mode if necessary
  ;; and to include a dtb.txt, bootloader.txt, and a custom.txt, each with
  ;; separated configurations for the Raspberry Pi firmware.
  (raspi-config-file
   "config.txt"
   `("# See https://www.raspberrypi.org/documentation/configuration/config-txt/README.md for details."
     ""
     ,(string-append "arm_64bit=" (if (target-aarch64?) "1" "0"))
     "include dtb.txt"
     "include bootloader.txt"
     "include custom.txt")))

(define-public %raspi-bcm27-dtb-txt
  ;; A dtb.txt file to be included by the config.txt to ensure that the
  ;; downstream device tree files bcm27*.dtb will be used.
  (raspi-config-file
   "dtb.txt"
   "upstream_kernel=0"))

(define-public %raspi-bcm28-dtb-txt
  ;; A dtb.txt file to be included by the config.txt to ensure that the
  ;; upstream device tree files bcm28*.dtb will be used.
  ;; This also implies the use of the dtoverlay=upstream.
  (raspi-config-file
   "dtb.txt"
   "upstream_kernel=1"))

(define-public %raspi-u-boot-bootloader-txt
  ;; A bootloader.txt file to be included by the config.txt to load the
  ;; U-Boot bootloader.
  (raspi-config-file
   "bootloader.txt"
   '("dtoverlay=upstream"
     "enable_uart=1"
     "kernel=u-boot.bin")))

(define (raspi-custom-txt content)
  "Make a custom.txt file for the Raspberry Pi firmware.
CONTENT can be a list of strings, which are concatenated with a newline
character.  Alternatively CONTENT can be a string with the full file content."
  (raspi-config-file "custom.txt" content))

(define (make-raspi-bcm28-dtbs linux)
  "Make a package with the device-tree files for Raspberry Pi models from the
kernel LINUX."
  (package
    (inherit linux)
    (name "raspi-bcm28-dtbs")
    (source #f)
    (build-system copy-build-system)
    (arguments
     #~(list
        #:phases #~(modify-phases %standard-phases (delete 'unpack))
        #:install-plan
        (list (list (search-input-directory %build-inputs
                                            "lib/dtbs/broadcom/")
                    "." #:include-regexp '("/bcm....-rpi.*\\.dtb")))))
    (inputs (list linux))
    (synopsis "Device-tree files for a Raspberry Pi")
    (description
     (format #f "The device-tree files for Raspberry Pi models from ~a."
             (package-name linux)))))

(define-public grub-efi-bootloader-chain-raspi-64
  ;; A bootloader capable to boot a Raspberry Pi over network via TFTP or from
  ;; a local storage like a micro SD card.  It neither installs firmware nor
  ;; device-tree files for the Raspberry Pi.  It just assumes them to be
  ;; existing in boot/efi in the same way that some UEFI firmware with ACPI
  ;; data is usually assumed to be existing on PCs.  It creates firmware
  ;; configuration files and a bootloader-chain with U-Boot to provide an EFI
  ;; API for the final GRUB bootloader.  It also serves as a blue-print to
  ;; create an a custom bootloader-chain with firmware and device-tree
  ;; packages or files.
  (efi-bootloader-chain grub-efi-netboot-removable-bootloader
                        #:packages (list u-boot-rpi-arm64-efi-bin)
                        #:files (list %raspi-config-txt
                                      %raspi-bcm27-dtb-txt
                                      %raspi-u-boot-bootloader-txt)))

(define (make-raspi-defconfig arch defconfig sha256-as-base32)
  "Make for the architecture ARCH a file-like object from the DEFCONFIG file
with the hash SHA256-AS-BASE32.  This object can be used as the #:defconfig
argument of the function (modify-linux)."
  (make-defconfig
   (string-append
    ;; This is from commit 7838840 on branch rpi-5.18.y,
    ;; see https://github.com/raspberrypi/linux/tree/rpi-5.18.y/
    ;; and https://github.com/raspberrypi/linux/commit/7838840b5606a2051b31da4c598466df7b1c3005
    "https://raw.githubusercontent.com/raspberrypi/linux/7838840b5606a2051b31da4c598466df7b1c3005/arch/"
    arch "/configs/" defconfig)
   sha256-as-base32))

(define-public %bcm2709-defconfig
  (make-raspi-defconfig
   "arm" "bcm2709_defconfig"
   "1hcxmsr131f92ay3bfglrggds8ajy904yj3vw7c42i4c66256a79"))

(define-public %bcm2711-defconfig
  (make-raspi-defconfig
   "arm" "bcm2711_defconfig"
   "1n7g5yq0hdp8lh0x6bfxph2ff8yn8zisdj3qg0gbn83j4v8i1zbd"))

(define-public %bcm2711-defconfig-64
  (make-raspi-defconfig
   "arm64" "bcm2711_defconfig"
   "0k9q7qvw826v2hrp49xnxnw93pnnkicwx869chvlf7i57461n4i7"))

(define-public %bcmrpi3-defconfig
  (make-raspi-defconfig
   "arm64" "bcmrpi3_defconfig"
   "1bfnl4p0ddx3200dg91kmh2pln36w95y05x1asc312kixv0jgd81"))

(define-public raspberrypi-userland
  ;; There are no release nor tag; use the latest commit.
  (let ((revision "0")
        (commit "54fd97ae4066a10b6b02089bc769ceed328737e0"))
    (package
      (name "raspberrypi-userland")
      (version (git-version "0.0.0" revision commit))
      (source (origin
                (method git-fetch)
                (uri (git-reference
                      (url "https://github.com/raspberrypi/userland")
                      (commit commit)))
                (file-name (git-file-name name version))
                (sha256
                 (base32
                  "01853x2kx36vcm1wd0p20v72kw2p4xhnzp36jivh06mhma9b3h2v"))))
      (build-system cmake-build-system)
      (arguments
       (list
        #:tests? #f                     ;no test suite
        #:configure-flags #~(list (string-append "-DVMCS_INSTALL_PREFIX="
                                                 #$output))
        #:phases
        #~(modify-phases %standard-phases
            (add-after 'unpack 'patch-paths
              (lambda _
                (substitute* "interface/khronos/ext/egl_khr_image_client.c"
                  (("/opt/vc/lib/libvcsm.so")
                   (string-append #$output "/lib/libvcsm.so")))))
            (add-after 'unpack 'disable-hello_pi
              (lambda _
                ;; Do not build hello_pi, which installs 32 MiB of binaries
                ;; and source files to src/.
                (substitute* "host_applications/linux/CMakeLists.txt"
                  ((".*add_subdirectory\\(apps/hello_pi).*")
                   ""))
                (substitute* "makefiles/cmake/vmcs.cmake"
                  (("install.*host_applications/linux/apps/hello_pi" all)
                   (string-append "# " all))
                  ((".*DESTINATION \\$\\{VMCS_INSTALL_PREFIX}/src)" all)
                   (string-append "# " all))))))))
      (native-inputs (list pkg-config))
      (home-page "https://github.com/raspberrypi/userland/")
      (supported-systems (list "armhf-linux" "aarch64-linux"))
      (synopsis "Raspberry Pi GPU-related libraries")
      (description "This package package contains libraries to interface to
EGL, mmal, GLESv2, vcos, openmaxil, vchiq_arm, bcm_host, VFC and OpenVG.  It
also provides the @command{dtmerge}, @command{dtoverlay}, @command{dtparam},
@command{raspivid} and @command{tvservice} commands, among others.")
      (license license:bsd-3))))

(define-public rpi-fbcp
  ;; There are no release nor tag; use the latest commit.
  (let ((revision "0")
        (commit "af8d32246c23cb23e4030e6588668a14341f5ddc"))
    (package
      (name "rpi-fbcp")
      (version (git-version "0.0.0" revision commit))
      (source (origin
                (method git-fetch)
                (uri (git-reference
                      (url "https://github.com/tasanakorn/rpi-fbcp")
                      (commit commit)))
                (file-name (git-file-name name version))
                (sha256
                 (base32
                  "10wym2jckicxm5iwqgby6gbhkznyi1q8x41v0qahzv71x85xpsl5"))))
      (build-system cmake-build-system)
      (arguments
       (list
        #:tests? #f                     ;no test suite
        #:phases
        #~(modify-phases %standard-phases
            (replace 'install
              ;; There is no installation target.
              (lambda _
                (install-file "fbcp" (string-append #$output "/bin")))))))
      (inputs (list raspberrypi-userland))
      (home-page "https://github.com/tasanakorn/rpi-fbcp")
      (synopsis "Mirror primary to secondary frame buffer on Raspberry Pi")
      (description "The @command{fbcp} command provided by this package can be
used to copy the primary frame buffer to the secondary frame buffer of a
Raspberry Pi.  It can for example mirror the primary HDMI output to a
secondary LCD display connected to the Raspberry Pi board.")
      (license license:expat))))

(define-public rpi-imager
  (package
    (name "rpi-imager")
    (version "1.7.5")
    (source (origin
              (method git-fetch)
              (uri (git-reference
                    (url "https://github.com/raspberrypi/rpi-imager")
                    (commit (string-append "v" version))))
              (file-name (git-file-name name version))
              (modules '((guix build utils)
                         (ice-9 ftw)
                         (srfi srfi-26)))
              (snippet '(begin
                          ;; Remove all but the following bundled libraries,
                          ;; which are not yet packaged in Guix.
                          (define keep '("." ".."
                                         "drivelist"
                                         "mountutils"
                                         "sha256crypt"))
                          (with-directory-excursion "src/dependencies"
                            (for-each delete-file-recursively
                                      (scandir "." (negate
                                                    (cut member <> keep)))))))
              (sha256
               (base32
                "0c5qsqh7drvf76hc75m2cp7bf44w7gwbmhgaqjrl5qwb6pbqf7y8"))))
    (build-system qt-build-system)
    (arguments
     (list
      #:tests? #f                       ;no test suite
      #:configure-flags #~(list "-DENABLE_TELEMETRY=OFF")
      #:phases
      #~(modify-phases %standard-phases
          (add-after 'unpack 'chdir
            (lambda _
              (chdir "src")))
          (add-after 'chdir 'customize-os-list.json
            ;; The default operating system JSON list contains non-FSDG
            ;; systems.
            (lambda _
              (let* ((datadir (string-append #$output
                                             "/share/rpi-imager"))
                     (os-list.json (string-append datadir "/os-list.json")))
                (mkdir-p datadir)
                #$(with-extensions (list guile-json-4)
                    #~(begin
                        (use-modules (json))
                        (call-with-output-file os-list.json
                          ;; TODO: Register FSDG and RPi compatible OS
                          ;; images here.
                          (lambda (port)
                            (scm->json '() port)))))
                (substitute* "config.h"
                  (("#define OSLIST_URL.*")
                   (string-append "#define OSLIST_URL \"file:///"
                                  os-list.json "\"\n"))))))
          (add-after 'chdir 'patch-cmake
            (lambda _
              (substitute* "CMakeLists.txt"
                ;; lsblk expects to have access to /sys/dev/block,
                ;; which doesn't exist in the build container;
                ;; prevent the check to fail the build.
                (("ret EQUAL \"1\"")
                 "FALSE")))))))
    (inputs
     (list gnutls
           curl
           libarchive
           qtdeclarative-5
           qtquickcontrols2-5
           qtsvg-5
           qttools-5
           util-linux))
    (home-page "https://github.com/raspberrypi/rpi-imager/")
    (synopsis "Raspberry Pi Imaging Utility")
    (description "rpi-imager is graphical utility to easily provision and
flash a memory card with an operating system image suitable for the Raspberry
Pi single board computer.")
    (license license:asl2.0)))

(define-public waveshare-dtoverlays
  (let ((commit "6ea99d4afb4776fdb008708f3f30df1de6fc24e3")
        (revision "0"))
    (package
      (name "waveshare-dtoverlays")
      (version (git-version "0.0.0" revision commit))
      (source (origin
                (method git-fetch)
                (uri (git-reference
                      (url "https://github.com/swkim01/waveshare-dtoverlays")
                      (commit commit)))
                (file-name (git-file-name name version))
                (modules '((guix build utils)))
                ;; Delete pre-compiled device tree overlay binary files.
                (snippet '(for-each delete-file (find-files "." "\\.dtbo$")))
                (sha256
                 (base32
                  "1c30wnlinicwlivlri25wns6x8nx7asf5fh2zqxkzr9h1jsxbzwz"))))
      (build-system gnu-build-system)
      (arguments (list #:tests? #f      ;no test suite
                       #:make-flags #~(list (string-append "PREFIX="
                                                           #$output))
                       #:phases #~(modify-phases %standard-phases
                                    (delete 'configure))))
      (native-inputs (list dtc))
      (home-page "https://github.com/swkim01/waveshare-dtoverlays/")
      (synopsis "Device tree overlays for WaveShare SpotPear TFT LCDs")
      (description "This package contains device tree overlay binaries to
support the WaveShare SpotPear @acronym{TFT, Thin-Film Transistor}
@acronym{LCDs, Liquid Crystal Display} on the Raspberry Pi.")
      (license license:gpl3+))))

debug log:

solving 80bfaf0896 ...
found 80bfaf0896 in https://git.savannah.gnu.org/cgit/guix.git

(*) Git path names are given by the tree(s) the blob belongs to.
    Blobs themselves have no identifier aside from the hash of its contents.^

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/guix.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.