* Getting Guix to shutdown my laptop properly with Sway and no DE
@ 2023-07-04 19:26 danclm--- via
2023-07-04 21:19 ` Robby Zambito
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: danclm--- via @ 2023-07-04 19:26 UTC (permalink / raw)
To: Help Guix
Hello everyone!
My T420 with Guix (no DE, only SDDM + Elogind + Sway) hangs during shutdown after running loginctl poweroff/reboot or /sbin/shutdown /sbin/reboot. It just sits there and only resolution is hard poweroff. It happens often.
Is there something that I'm missing in my system.scm?
```
;; My Guix config with the SwayWM
(use-modules
(gnu) (gnu system nss) (gnu system setuid))
(use-service-modules
dbus desktop networking sddm sound ssh)
(use-package-modules
certs
compression
disk
emacs
finance
fonts
fontutils
freedesktop
glib
games
gnome
gnupg
gnuzilla
gtk
haskell-xyz
image
libreoffice
linux
package-management
password-utils
pulseaudio
rsync
ruby
ssh
terminals
tex
texinfo
version-control
wm)
(operating-system
(host-name "t420")
(timezone "Europe/Rome")
(locale "en_US.utf8")
;; Keyboard layout.
(keyboard-layout (keyboard-layout "us"))
;; Bootloader
(bootloader (bootloader-configuration
(bootloader grub-bootloader)
(terminal-outputs '(console))
(targets (list "/dev/sda"))
(keyboard-layout keyboard-layout)))
;; Specify a mapped device for the encrypted root partition.
;; The UUID is that returned by 'cryptsetup luksUUID'.
(mapped-devices
(list (mapped-device
(source (uuid "8022876e-e0cc-4ec5-8363-0f07c590cdbc"))
(targets (list "guix-root"))
(type luks-device-mapping))))
(file-systems
(append
(list (file-system
(device (file-system-label "guix-root"))
(mount-point "/")
(type "ext4")
(dependencies mapped-devices)))
%base-file-systems))
(swap-devices (list
(swap-space (target "/swapfile"))))
;; Define users and groups.
(users
(cons (user-account
(name "dani")
(comment "")
(group "users")
(home-directory "/home/dani")
(supplementary-groups '("wheel" "netdev"
"audio" "video" "input")))
%base-user-accounts))
;; Sudoers
(sudoers-file
(plain-file "sudoers" "\
%root ALL=(ALL) ALL
%wheel ALL=(ALL) ALL
%wheel ALL=(ALL) NOPASSWD: /run/current-system/profile/sbin/reboot\n"))
;; This is where we specify system-wide packages.
(packages
(append
(list
adwaita-icon-theme
alacritty
at-spi2-core
dbus
emacs
font-awesome
fontconfig
font-dejavu
font-gnu-unifont
fzf
git
gnupg
grim
gtypist
icecat
keepassxc
ledger
libreoffice
nss-certs
openssh-sans-x
pandoc
parted
pass-otp
password-store
pavucontrol
pinentry
pulseaudio
rsync
ruby-asciidoctor
slurp
stow
sway
swayidle
swaylock-effects
texinfo
texlive-base
unzip
waybar
xdg-utils
zip)
%base-packages))
;; Some programs need to run with “root” privileges, even when they are launched by unprivileged users
(setuid-programs (cons*
(setuid-program
(program
(file-append swaylock-effects "/bin/swaylock")))
%setuid-programs))
;; Services
(services
(cons*
(service alsa-service-type
(alsa-configuration
(pulseaudio? #t)))
(service dbus-root-service-type)
(service elogind-service-type)
(service openssh-service-type
(openssh-configuration
(openssh openssh-sans-x)
(port-number 22)
(password-authentication? #f)
(permit-root-login 'prohibit-password)
(authorized-keys
`(("dani" ,(local-file "/home/dani/.ssh/authorized_keys"))))))
(service polkit-service-type)
(service sddm-service-type
(sddm-configuration
(auto-login-user "dani")
(display-server "wayland")))
;; Static networking for one NIC, IPv4-only.
(service static-networking-service-type
(list (static-networking
(addresses
(list (network-address
(device "wlp1s0")
(value "192.168.1.200/24"))))
(routes
(list (network-route
(destination "default")
(gateway "192.168.1.1"))))
(name-servers '("1.1.1.1" "1.0.0.1")))))
(service wpa-supplicant-service-type
(wpa-supplicant-configuration
(config-file "/etc/wpa-supplicant/wpa-supplicant.conf")
(interface "wlp1s0")))
%base-services))
;; Allow resolution of '.local' host names with mDNS.
(name-service-switch %mdns-host-lookup-nss))
```
Thank you in advance,
Greetings
--
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Getting Guix to shutdown my laptop properly with Sway and no DE
2023-07-04 19:26 Getting Guix to shutdown my laptop properly with Sway and no DE danclm--- via
@ 2023-07-04 21:19 ` Robby Zambito
2023-07-04 22:12 ` danclm--- via
2023-07-05 1:11 ` Skyler Ferris
2023-07-05 5:25 ` Ignas Lapėnas
2 siblings, 1 reply; 8+ messages in thread
From: Robby Zambito @ 2023-07-04 21:19 UTC (permalink / raw)
To: danclm; +Cc: help-guix
Hi,
I don't have any suggestions for you, I just wish to add that I am also
having the same issue, and I use Sway and Elogind (but no display
manager). I have been dealing with it by hard powering off also, but it
would be nice to have a proper solution :)
Robby
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Getting Guix to shutdown my laptop properly with Sway and no DE
2023-07-04 21:19 ` Robby Zambito
@ 2023-07-04 22:12 ` danclm--- via
2023-07-05 2:44 ` Robby Zambito
0 siblings, 1 reply; 8+ messages in thread
From: danclm--- via @ 2023-07-04 22:12 UTC (permalink / raw)
To: Robby Zambito; +Cc: help-guix
Hi Robby,
thanks for your response.
Do you mind sharing your config?
I never managed on Guix to autologin and automatically start Sway without a display manager.
Daniele
--
Jul 4, 2023, 23:21 by contact@robbyzambito.me:
> Hi,
>
> I don't have any suggestions for you, I just wish to add that I am also
> having the same issue, and I use Sway and Elogind (but no display
> manager). I have been dealing with it by hard powering off also, but it
> would be nice to have a proper solution :)
>
> Robby
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Getting Guix to shutdown my laptop properly with Sway and no DE
2023-07-04 19:26 Getting Guix to shutdown my laptop properly with Sway and no DE danclm--- via
2023-07-04 21:19 ` Robby Zambito
@ 2023-07-05 1:11 ` Skyler Ferris
2023-07-05 5:25 ` Ignas Lapėnas
2 siblings, 0 replies; 8+ messages in thread
From: Skyler Ferris @ 2023-07-05 1:11 UTC (permalink / raw)
To: help-guix
On 7/4/23 12:26, danclm--- via wrote:
> Hello everyone!
>
> My T420 with Guix (no DE, only SDDM + Elogind + Sway) hangs during shutdown after running loginctl poweroff/reboot or /sbin/shutdown /sbin/reboot. It just sits there and only resolution is hard poweroff. It happens often.
In case this is relevant I am experiencing a similar issue in a VM
running kmscon. I /think/ it happens when I reconfigure my system in a
way that changes the services running on the OS (maybe the user services
too, I don't run any at the moment) but this is based on anecdotal
observations, I haven't found time to thoroughly test or root-cause
anything. So it might be a different issue with the same symptom, or
Sway might not be a relevant detail (or both).
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Getting Guix to shutdown my laptop properly with Sway and no DE
2023-07-04 22:12 ` danclm--- via
@ 2023-07-05 2:44 ` Robby Zambito
0 siblings, 0 replies; 8+ messages in thread
From: Robby Zambito @ 2023-07-05 2:44 UTC (permalink / raw)
To: danclm; +Cc: help-guix
danclm@tutanota.com writes:
> Hi Robby,
> thanks for your response.
>
> Do you mind sharing your config?
> I never managed on Guix to autologin and automatically start Sway without a display manager.
>
> Daniele
Hi Daniele,
I actually don't have auto login / auto start Sway - I just login with a
TTY, and then I use `herd start sway` with a little guix home service
that I wrote:
(shepherd-service
(documentation "SwayWM")
(provision '(sway))
(requirement '(dbus))
(respawn? #f)
(auto-start? #f)
(start #~(make-forkexec-constructor
(list #$(file-append (specification->package "dbus") "/bin/dbus-run-session") "sway")
#:log-file (string-append #$log-dir "/swaywm.log")))
(stop #~(make-system-destructor
(string-join (list #$(file-append (specification->package "sway") "/bin/swaymsg")
"exit")))))
This isn't perfect (I use the system sway binary, but I use swaymsg from
my home profile - which means they can be different package version; and
herd stop sway doesn't work), but it's been good enough for me to not
care to fix.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Getting Guix to shutdown my laptop properly with Sway and no DE
2023-07-04 19:26 Getting Guix to shutdown my laptop properly with Sway and no DE danclm--- via
2023-07-04 21:19 ` Robby Zambito
2023-07-05 1:11 ` Skyler Ferris
@ 2023-07-05 5:25 ` Ignas Lapėnas
2023-07-17 8:06 ` Etienne B. Roesch
2 siblings, 1 reply; 8+ messages in thread
From: Ignas Lapėnas @ 2023-07-05 5:25 UTC (permalink / raw)
Cc: help-guix
Hello,
I have the same (or extremely similiar) issue. It seems that it is because of
shepherd. The system seems to work alright, although can’t communicate with it
at all. For some reason it hangs. Tried looking for logs for the program, sadly
I’m extremely new to Gnu Guix and still stuck here. :(
(Writing this out with an idea that it might maybe help)
danclm— via <help-guix@gnu.org> writes:
> Hello everyone!
>
> My T420 with Guix (no DE, only SDDM + Elogind + Sway) hangs during shutdown
> after running loginctl poweroff/reboot or /sbin/shutdown /sbin/reboot. It just
> sits there and only resolution is hard poweroff. It happens often.
>
> Is there something that I’m missing in my system.scm?
>
> ```
> ;; My Guix config with the SwayWM
>
> (use-modules
> (gnu) (gnu system nss) (gnu system setuid))
> (use-service-modules
> dbus desktop networking sddm sound ssh)
> (use-package-modules
> certs
> compression
> disk
> emacs
> finance
> fonts
> fontutils
> freedesktop
> glib
> games
> gnome
> gnupg
> gnuzilla
> gtk
> haskell-xyz
> image
> libreoffice
> linux
> package-management
> password-utils
> pulseaudio
> rsync
> ruby
> ssh
> terminals
> tex
> texinfo
> version-control
> wm)
>
> (operating-system
> (host-name “t420”)
> (timezone “Europe/Rome”)
> (locale “en_US.utf8”)
>
> ;; Keyboard layout.
> (keyboard-layout (keyboard-layout “us”))
>
> ;; Bootloader
> (bootloader (bootloader-configuration
> (bootloader grub-bootloader)
> (terminal-outputs ’(console))
> (targets (list “/dev/sda”))
> (keyboard-layout keyboard-layout)))
>
> ;; Specify a mapped device for the encrypted root partition.
> ;; The UUID is that returned by ’cryptsetup luksUUID’.
> (mapped-devices
> (list (mapped-device
> (source (uuid “8022876e-e0cc-4ec5-8363-0f07c590cdbc”))
> (targets (list “guix-root”))
> (type luks-device-mapping))))
>
> (file-systems
> (append
> (list (file-system
> (device (file-system-label “guix-root”))
> (mount-point “/“)
> (type ”ext4“)
> (dependencies mapped-devices)))
> %base-file-systems))
>
> (swap-devices (list
> (swap-space (target ”/swapfile“))))
>
> ;; Define users and groups.
> (users
> (cons (user-account
> (name ”dani“)
> (comment ”“)
> (group ”users“)
> (home-directory ”/home/dani“)
> (supplementary-groups ’(”wheel“ ”netdev“
> ”audio“ ”video“ ”input“)))
> %base-user-accounts))
>
> ;; Sudoers
> (sudoers-file
> (plain-file ”sudoers“ ”\
> %root ALL=(ALL) ALL
> %wheel ALL=(ALL) ALL
> %wheel ALL=(ALL) NOPASSWD: /run/current-system/profile/sbin/reboot\n“))
>
> ;; This is where we specify system-wide packages.
> (packages
> (append
> (list
> adwaita-icon-theme
> alacritty
> at-spi2-core
> dbus
> emacs
> font-awesome
> fontconfig
> font-dejavu
> font-gnu-unifont
> fzf
> git
> gnupg
> grim
> gtypist
> icecat
> keepassxc
> ledger
> libreoffice
> nss-certs
> openssh-sans-x
> pandoc
> parted
> pass-otp
> password-store
> pavucontrol
> pinentry
> pulseaudio
> rsync
> ruby-asciidoctor
> slurp
> stow
> sway
> swayidle
> swaylock-effects
> texinfo
> texlive-base
> unzip
> waybar
> xdg-utils
> zip)
> %base-packages))
>
> ;; Some programs need to run with “root” privileges, even when they are launched by unprivileged users
> (setuid-programs (cons*
> (setuid-program
> (program
> (file-append swaylock-effects ”/bin/swaylock“)))
> %setuid-programs))
>
> ;; Services
> (services
> (cons*
> (service alsa-service-type
> (alsa-configuration
> (pulseaudio? #t)))
> (service dbus-root-service-type)
> (service elogind-service-type)
> (service openssh-service-type
> (openssh-configuration
> (openssh openssh-sans-x)
> (port-number 22)
> (password-authentication? #f)
> (permit-root-login ‘prohibit-password)
> (authorized-keys
> `((”dani“ ,(local-file ”/home/dani/.ssh/authorized_keys“))))))
> (service polkit-service-type)
> (service sddm-service-type
> (sddm-configuration
> (auto-login-user ”dani“)
> (display-server ”wayland“)))
> ;; Static networking for one NIC, IPv4-only.
> (service static-networking-service-type
> (list (static-networking
> (addresses
> (list (network-address
> (device ”wlp1s0“)
> (value ”192.168.1.200/24“))))
> (routes
> (list (network-route
> (destination ”default“)
> (gateway ”192.168.1.1“))))
> (name-servers ’(”1.1.1.1“ ”1.0.0.1“)))))
> (service wpa-supplicant-service-type
> (wpa-supplicant-configuration
> (config-file ”/etc/wpa-supplicant/wpa-supplicant.conf“)
> (interface ”wlp1s0“)))
> %base-services))
>
> ;; Allow resolution of ‘.local’ host names with mDNS.
> (name-service-switch %mdns-host-lookup-nss))
> ```
>
> Thank you in advance,
>
> Greetings
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Getting Guix to shutdown my laptop properly with Sway and no DE
2023-07-05 5:25 ` Ignas Lapėnas
@ 2023-07-17 8:06 ` Etienne B. Roesch
2023-07-17 14:18 ` Chris Keschnat
0 siblings, 1 reply; 8+ messages in thread
From: Etienne B. Roesch @ 2023-07-17 8:06 UTC (permalink / raw)
To: Ignas Lapėnas; +Cc: help-guix
Hi,
I think I have been having the same problem for a while, using standalone
guix system on a desktop. It seems to sort itself out after a pull and
system reconfigure, but then it breaks again: The countdown does not start
and hangs. I have to hard stop the desktop, which is fine but not exactly
what should be happening.
Etienne
On Sun, Jul 9, 2023 at 3:42 PM Ignas Lapėnas <ignas@lapenas.dev> wrote:
> Hello,
>
> I have the same (or extremely similiar) issue. It seems that it is because
> of
> shepherd. The system seems to work alright, although can’t communicate
> with it
> at all. For some reason it hangs. Tried looking for logs for the program,
> sadly
> I’m extremely new to Gnu Guix and still stuck here. :(
>
> (Writing this out with an idea that it might maybe help)
>
> danclm— via <help-guix@gnu.org> writes:
>
> > Hello everyone!
> >
> > My T420 with Guix (no DE, only SDDM + Elogind + Sway) hangs during
> shutdown
> > after running loginctl poweroff/reboot or /sbin/shutdown /sbin/reboot.
> It just
> > sits there and only resolution is hard poweroff. It happens often.
> >
> > Is there something that I’m missing in my system.scm?
> >
> > ```
> > ;; My Guix config with the SwayWM
> >
> > (use-modules
> > (gnu) (gnu system nss) (gnu system setuid))
> > (use-service-modules
> > dbus desktop networking sddm sound ssh)
> > (use-package-modules
> > certs
> > compression
> > disk
> > emacs
> > finance
> > fonts
> > fontutils
> > freedesktop
> > glib
> > games
> > gnome
> > gnupg
> > gnuzilla
> > gtk
> > haskell-xyz
> > image
> > libreoffice
> > linux
> > package-management
> > password-utils
> > pulseaudio
> > rsync
> > ruby
> > ssh
> > terminals
> > tex
> > texinfo
> > version-control
> > wm)
> >
> > (operating-system
> > (host-name “t420”)
> > (timezone “Europe/Rome”)
> > (locale “en_US.utf8”)
> >
> > ;; Keyboard layout.
> > (keyboard-layout (keyboard-layout “us”))
> >
> > ;; Bootloader
> > (bootloader (bootloader-configuration
> > (bootloader grub-bootloader)
> > (terminal-outputs ’(console))
> > (targets (list “/dev/sda”))
> > (keyboard-layout keyboard-layout)))
> >
> > ;; Specify a mapped device for the encrypted root partition.
> > ;; The UUID is that returned by ’cryptsetup luksUUID’.
> > (mapped-devices
> > (list (mapped-device
> > (source (uuid “8022876e-e0cc-4ec5-8363-0f07c590cdbc”))
> > (targets (list “guix-root”))
> > (type luks-device-mapping))))
> >
> > (file-systems
> > (append
> > (list (file-system
> > (device (file-system-label “guix-root”))
> > (mount-point “/“)
> > (type ”ext4“)
> > (dependencies mapped-devices)))
> > %base-file-systems))
> >
> > (swap-devices (list
> > (swap-space (target ”/swapfile“))))
> >
> > ;; Define users and groups.
> > (users
> > (cons (user-account
> > (name ”dani“)
> > (comment ”“)
> > (group ”users“)
> > (home-directory ”/home/dani“)
> > (supplementary-groups ’(”wheel“ ”netdev“
> > ”audio“ ”video“ ”input“)))
> > %base-user-accounts))
> >
> > ;; Sudoers
> > (sudoers-file
> > (plain-file ”sudoers“ ”\
> > %root ALL=(ALL) ALL
> > %wheel ALL=(ALL) ALL
> > %wheel ALL=(ALL) NOPASSWD: /run/current-system/profile/sbin/reboot\n“))
> >
> > ;; This is where we specify system-wide packages.
> > (packages
> > (append
> > (list
> > adwaita-icon-theme
> > alacritty
> > at-spi2-core
> > dbus
> > emacs
> > font-awesome
> > fontconfig
> > font-dejavu
> > font-gnu-unifont
> > fzf
> > git
> > gnupg
> > grim
> > gtypist
> > icecat
> > keepassxc
> > ledger
> > libreoffice
> > nss-certs
> > openssh-sans-x
> > pandoc
> > parted
> > pass-otp
> > password-store
> > pavucontrol
> > pinentry
> > pulseaudio
> > rsync
> > ruby-asciidoctor
> > slurp
> > stow
> > sway
> > swayidle
> > swaylock-effects
> > texinfo
> > texlive-base
> > unzip
> > waybar
> > xdg-utils
> > zip)
> > %base-packages))
> >
> > ;; Some programs need to run with “root” privileges, even when they
> are launched by unprivileged users
> > (setuid-programs (cons*
> > (setuid-program
> > (program
> > (file-append swaylock-effects ”/bin/swaylock“)))
> > %setuid-programs))
> >
> > ;; Services
> > (services
> > (cons*
> > (service alsa-service-type
> > (alsa-configuration
> > (pulseaudio? #t)))
> > (service dbus-root-service-type)
> > (service elogind-service-type)
> > (service openssh-service-type
> > (openssh-configuration
> > (openssh openssh-sans-x)
> > (port-number 22)
> > (password-authentication? #f)
> > (permit-root-login ‘prohibit-password)
> > (authorized-keys
> > `((”dani“ ,(local-file
> ”/home/dani/.ssh/authorized_keys“))))))
> > (service polkit-service-type)
> > (service sddm-service-type
> > (sddm-configuration
> > (auto-login-user ”dani“)
> > (display-server ”wayland“)))
> > ;; Static networking for one NIC, IPv4-only.
> > (service static-networking-service-type
> > (list (static-networking
> > (addresses
> > (list (network-address
> > (device ”wlp1s0“)
> > (value ”192.168.1.200/24“))))
> > (routes
> > (list (network-route
> > (destination ”default“)
> > (gateway ”192.168.1.1“))))
> > (name-servers ’(”1.1.1.1“ ”1.0.0.1“)))))
> > (service wpa-supplicant-service-type
> > (wpa-supplicant-configuration
> > (config-file ”/etc/wpa-supplicant/wpa-supplicant.conf“)
> > (interface ”wlp1s0“)))
> > %base-services))
> >
> > ;; Allow resolution of ‘.local’ host names with mDNS.
> > (name-service-switch %mdns-host-lookup-nss))
> > ```
> >
> > Thank you in advance,
> >
> > Greetings
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Getting Guix to shutdown my laptop properly with Sway and no DE
2023-07-17 8:06 ` Etienne B. Roesch
@ 2023-07-17 14:18 ` Chris Keschnat
0 siblings, 0 replies; 8+ messages in thread
From: Chris Keschnat @ 2023-07-17 14:18 UTC (permalink / raw)
To: help-guix
Same issue here, quite often. But I have no idea what's happening and no
logs ;/
"Etienne B. Roesch" <etienne.roesch@gmail.com> writes:
> Hi,
>
> I think I have been having the same problem for a while, using standalone
> guix system on a desktop. It seems to sort itself out after a pull and
> system reconfigure, but then it breaks again: The countdown does not start
> and hangs. I have to hard stop the desktop, which is fine but not exactly
> what should be happening.
>
> Etienne
>
> On Sun, Jul 9, 2023 at 3:42 PM Ignas Lapėnas <ignas@lapenas.dev> wrote:
>
>> Hello,
>>
>> I have the same (or extremely similiar) issue. It seems that it is because
>> of
>> shepherd. The system seems to work alright, although can’t communicate
>> with it
>> at all. For some reason it hangs. Tried looking for logs for the program,
>> sadly
>> I’m extremely new to Gnu Guix and still stuck here. :(
>>
>> (Writing this out with an idea that it might maybe help)
>>
>> danclm— via <help-guix@gnu.org> writes:
>>
>> > Hello everyone!
>> >
>> > My T420 with Guix (no DE, only SDDM + Elogind + Sway) hangs during
>> shutdown
>> > after running loginctl poweroff/reboot or /sbin/shutdown /sbin/reboot.
>> It just
>> > sits there and only resolution is hard poweroff. It happens often.
>> >
>> > Is there something that I’m missing in my system.scm?
>> >
>> > ```
>> > ;; My Guix config with the SwayWM
>> >
>> > (use-modules
>> > (gnu) (gnu system nss) (gnu system setuid))
>> > (use-service-modules
>> > dbus desktop networking sddm sound ssh)
>> > (use-package-modules
>> > certs
>> > compression
>> > disk
>> > emacs
>> > finance
>> > fonts
>> > fontutils
>> > freedesktop
>> > glib
>> > games
>> > gnome
>> > gnupg
>> > gnuzilla
>> > gtk
>> > haskell-xyz
>> > image
>> > libreoffice
>> > linux
>> > package-management
>> > password-utils
>> > pulseaudio
>> > rsync
>> > ruby
>> > ssh
>> > terminals
>> > tex
>> > texinfo
>> > version-control
>> > wm)
>> >
>> > (operating-system
>> > (host-name “t420”)
>> > (timezone “Europe/Rome”)
>> > (locale “en_US.utf8”)
>> >
>> > ;; Keyboard layout.
>> > (keyboard-layout (keyboard-layout “us”))
>> >
>> > ;; Bootloader
>> > (bootloader (bootloader-configuration
>> > (bootloader grub-bootloader)
>> > (terminal-outputs ’(console))
>> > (targets (list “/dev/sda”))
>> > (keyboard-layout keyboard-layout)))
>> >
>> > ;; Specify a mapped device for the encrypted root partition.
>> > ;; The UUID is that returned by ’cryptsetup luksUUID’.
>> > (mapped-devices
>> > (list (mapped-device
>> > (source (uuid “8022876e-e0cc-4ec5-8363-0f07c590cdbc”))
>> > (targets (list “guix-root”))
>> > (type luks-device-mapping))))
>> >
>> > (file-systems
>> > (append
>> > (list (file-system
>> > (device (file-system-label “guix-root”))
>> > (mount-point “/“)
>> > (type ”ext4“)
>> > (dependencies mapped-devices)))
>> > %base-file-systems))
>> >
>> > (swap-devices (list
>> > (swap-space (target ”/swapfile“))))
>> >
>> > ;; Define users and groups.
>> > (users
>> > (cons (user-account
>> > (name ”dani“)
>> > (comment ”“)
>> > (group ”users“)
>> > (home-directory ”/home/dani“)
>> > (supplementary-groups ’(”wheel“ ”netdev“
>> > ”audio“ ”video“ ”input“)))
>> > %base-user-accounts))
>> >
>> > ;; Sudoers
>> > (sudoers-file
>> > (plain-file ”sudoers“ ”\
>> > %root ALL=(ALL) ALL
>> > %wheel ALL=(ALL) ALL
>> > %wheel ALL=(ALL) NOPASSWD: /run/current-system/profile/sbin/reboot\n“))
>> >
>> > ;; This is where we specify system-wide packages.
>> > (packages
>> > (append
>> > (list
>> > adwaita-icon-theme
>> > alacritty
>> > at-spi2-core
>> > dbus
>> > emacs
>> > font-awesome
>> > fontconfig
>> > font-dejavu
>> > font-gnu-unifont
>> > fzf
>> > git
>> > gnupg
>> > grim
>> > gtypist
>> > icecat
>> > keepassxc
>> > ledger
>> > libreoffice
>> > nss-certs
>> > openssh-sans-x
>> > pandoc
>> > parted
>> > pass-otp
>> > password-store
>> > pavucontrol
>> > pinentry
>> > pulseaudio
>> > rsync
>> > ruby-asciidoctor
>> > slurp
>> > stow
>> > sway
>> > swayidle
>> > swaylock-effects
>> > texinfo
>> > texlive-base
>> > unzip
>> > waybar
>> > xdg-utils
>> > zip)
>> > %base-packages))
>> >
>> > ;; Some programs need to run with “root” privileges, even when they
>> are launched by unprivileged users
>> > (setuid-programs (cons*
>> > (setuid-program
>> > (program
>> > (file-append swaylock-effects ”/bin/swaylock“)))
>> > %setuid-programs))
>> >
>> > ;; Services
>> > (services
>> > (cons*
>> > (service alsa-service-type
>> > (alsa-configuration
>> > (pulseaudio? #t)))
>> > (service dbus-root-service-type)
>> > (service elogind-service-type)
>> > (service openssh-service-type
>> > (openssh-configuration
>> > (openssh openssh-sans-x)
>> > (port-number 22)
>> > (password-authentication? #f)
>> > (permit-root-login ‘prohibit-password)
>> > (authorized-keys
>> > `((”dani“ ,(local-file
>> ”/home/dani/.ssh/authorized_keys“))))))
>> > (service polkit-service-type)
>> > (service sddm-service-type
>> > (sddm-configuration
>> > (auto-login-user ”dani“)
>> > (display-server ”wayland“)))
>> > ;; Static networking for one NIC, IPv4-only.
>> > (service static-networking-service-type
>> > (list (static-networking
>> > (addresses
>> > (list (network-address
>> > (device ”wlp1s0“)
>> > (value ”192.168.1.200/24“))))
>> > (routes
>> > (list (network-route
>> > (destination ”default“)
>> > (gateway ”192.168.1.1“))))
>> > (name-servers ’(”1.1.1.1“ ”1.0.0.1“)))))
>> > (service wpa-supplicant-service-type
>> > (wpa-supplicant-configuration
>> > (config-file ”/etc/wpa-supplicant/wpa-supplicant.conf“)
>> > (interface ”wlp1s0“)))
>> > %base-services))
>> >
>> > ;; Allow resolution of ‘.local’ host names with mDNS.
>> > (name-service-switch %mdns-host-lookup-nss))
>> > ```
>> >
>> > Thank you in advance,
>> >
>> > Greetings
>>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2023-07-17 14:20 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-07-04 19:26 Getting Guix to shutdown my laptop properly with Sway and no DE danclm--- via
2023-07-04 21:19 ` Robby Zambito
2023-07-04 22:12 ` danclm--- via
2023-07-05 2:44 ` Robby Zambito
2023-07-05 1:11 ` Skyler Ferris
2023-07-05 5:25 ` Ignas Lapėnas
2023-07-17 8:06 ` Etienne B. Roesch
2023-07-17 14:18 ` Chris Keschnat
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).