* bug#47734: Guix install script on foreign distro fails to add berlin public key
@ 2021-04-12 19:48 Julien Lepiller
2021-04-14 19:52 ` Leo Famulari
2021-04-21 12:45 ` Ludovic Courtès
0 siblings, 2 replies; 7+ messages in thread
From: Julien Lepiller @ 2021-04-12 19:48 UTC (permalink / raw)
To: 47734
Hi Guix!
When installing Guix on a new machine (foreign distro), substitute were not properly set up:
…
Permit downloading pre-built package binaries from the project's build farm? (yes/no) yes
/home/roptat/guix-install.sh: line 445: /root/.config/guix/current/share/guix/ci.guix.gnu.org.pub: No such file or directory
That was the latest version of the script downloaded from savannah. It downloaded and installed the 1.2.0 tarball.
I was able to fix that later manually, but let's make sure the script doesn't fail like that with the release :)
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#47734: Guix install script on foreign distro fails to add berlin public key
2021-04-12 19:48 bug#47734: Guix install script on foreign distro fails to add berlin public key Julien Lepiller
@ 2021-04-14 19:52 ` Leo Famulari
2021-04-20 0:48 ` Leo Famulari
2021-04-21 12:45 ` Ludovic Courtès
1 sibling, 1 reply; 7+ messages in thread
From: Leo Famulari @ 2021-04-14 19:52 UTC (permalink / raw)
To: Julien Lepiller; +Cc: 47734
On Mon, Apr 12, 2021 at 03:48:10PM -0400, Julien Lepiller wrote:
> Hi Guix!
>
> When installing Guix on a new machine (foreign distro), substitute were not properly set up:
>
> …
> Permit downloading pre-built package binaries from the project's build farm? (yes/no) yes
> /home/roptat/guix-install.sh: line 445: /root/.config/guix/current/share/guix/ci.guix.gnu.org.pub: No such file or directory
>
> That was the latest version of the script downloaded from savannah. It downloaded and installed the 1.2.0 tarball.
>
> I was able to fix that later manually, but let's make sure the script doesn't fail like that with the release :)
I ran the script, following the instructions in the manual, on a fresh
Debian system. I had no problems.
I also ran the script, not following the instructions exactly, but
instead doing `sudo ./guix-install.sh`, and it still worked fine. I
thought that maybe there were some 'sudo' vs 'sudo --login' shenanigans,
but nothing went wrong.
Can anybody reproduce this bug?
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#47734: Guix install script on foreign distro fails to add berlin public key
2021-04-14 19:52 ` Leo Famulari
@ 2021-04-20 0:48 ` Leo Famulari
0 siblings, 0 replies; 7+ messages in thread
From: Leo Famulari @ 2021-04-20 0:48 UTC (permalink / raw)
To: Julien Lepiller; +Cc: 47734
On Wed, Apr 14, 2021 at 03:52:56PM -0400, Leo Famulari wrote:
> Can anybody reproduce this bug?
Ping?
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#47734: Guix install script on foreign distro fails to add berlin public key
2021-04-12 19:48 bug#47734: Guix install script on foreign distro fails to add berlin public key Julien Lepiller
2021-04-14 19:52 ` Leo Famulari
@ 2021-04-21 12:45 ` Ludovic Courtès
2021-04-21 15:46 ` Julien Lepiller
1 sibling, 1 reply; 7+ messages in thread
From: Ludovic Courtès @ 2021-04-21 12:45 UTC (permalink / raw)
To: Julien Lepiller; +Cc: 47734
Hi Julien,
Julien Lepiller <julien@lepiller.eu> skribis:
> When installing Guix on a new machine (foreign distro), substitute were not properly set up:
>
> …
> Permit downloading pre-built package binaries from the project's build farm? (yes/no) yes
> /home/roptat/guix-install.sh: line 445: /root/.config/guix/current/share/guix/ci.guix.gnu.org.pub: No such file or directory
>
> That was the latest version of the script downloaded from savannah. It downloaded and installed the 1.2.0 tarball.
>
> I was able to fix that later manually, but let's make sure the script doesn't fail like that with the release :)
I don’t see how this can happen: ‘sys_create_store’ creates
~root/.config/guix/current, before ‘sys_authorize_build_farms’ runs.
Can you reproduce it, Julien?
Alternatively, could you paste the complete output of the
guix-install.sh script when it failed?
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#47734: Guix install script on foreign distro fails to add berlin public key
2021-04-21 12:45 ` Ludovic Courtès
@ 2021-04-21 15:46 ` Julien Lepiller
2021-04-21 19:56 ` Ludovic Courtès
0 siblings, 1 reply; 7+ messages in thread
From: Julien Lepiller @ 2021-04-21 15:46 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 47734
[-- Attachment #1: Type: text/plain, Size: 1191 bytes --]
I can't copy-paste easily to my email client right now, so here's a paste. I'll send the content later.
https://paste.debian.net/1194563/
Le 21 avril 2021 08:45:01 GMT-04:00, "Ludovic Courtès" <ludo@gnu.org> a écrit :
>Hi Julien,
>
>Julien Lepiller <julien@lepiller.eu> skribis:
>
>> When installing Guix on a new machine (foreign distro), substitute
>were not properly set up:
>>
>> …
>> Permit downloading pre-built package binaries from the project's
>build farm? (yes/no) yes
>> /home/roptat/guix-install.sh: line 445:
>/root/.config/guix/current/share/guix/ci.guix.gnu.org.pub: No such file
>or directory
>>
>> That was the latest version of the script downloaded from savannah.
>It downloaded and installed the 1.2.0 tarball.
>>
>> I was able to fix that later manually, but let's make sure the script
>doesn't fail like that with the release :)
>
>I don’t see how this can happen: ‘sys_create_store’ creates
>~root/.config/guix/current, before ‘sys_authorize_build_farms’ runs.
>
>Can you reproduce it, Julien?
>
>Alternatively, could you paste the complete output of the
>guix-install.sh script when it failed?
>
>Thanks,
>Ludo’.
[-- Attachment #2: Type: text/html, Size: 1631 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#47734: Guix install script on foreign distro fails to add berlin public key
2021-04-21 15:46 ` Julien Lepiller
@ 2021-04-21 19:56 ` Ludovic Courtès
2021-04-25 19:54 ` Ludovic Courtès
0 siblings, 1 reply; 7+ messages in thread
From: Ludovic Courtès @ 2021-04-21 19:56 UTC (permalink / raw)
To: Julien Lepiller; +Cc: 47734
Here’s the paste, for posterity:
--8<---------------cut here---------------start------------->8---
This script installs GNU Guix on your system
https://www.gnu.org/software/guix/
Press return to continue...
[1618245319.405]: Starting installation (Mon 12 Apr 2021 12:35:19 PM EDT)
[1618245319.409]: [ PASS ] verification of required commands completed
[1618245319.445]: [ INFO ] init system is: systemd
[1618245319.465]: [ WARN ] We recommend installing and/or starting your distribution 'nscd' service
[1618245319.467]: [ WARN ] Please read 'info guix "Application Setup"' about "Name Service Switch"
[1618245319.468]: [ INFO ] system is x86_64-linux
[1618245319.593]: [ PASS ] Release for your system: guix-binary-1.2.0.x86_64-linux
[1618245319.595]: [ INFO ] Downloading Guix release archive
guix-binary-1.2.0.x86_64-linux.tar.xz 100%[=========================================================================================================================================>] 76.00M 68.5MB/s in 1.1s
guix-binary-1.2.0.x86_64-linux.tar.xz.sig 100%[=========================================================================================================================================>] 833 --.-KB/s in 0s
[1618245320.829]: [ PASS ] download completed.
[1618245321.262]: [ PASS ] Signature is valid.
[1618245328.424]: [ PASS ] unpacked archive
[1618245328.426]: [ INFO ] Installing /var/guix and /gnu...
[1618245329.506]: [ INFO ] Linking the root user's profile
[1618245329.516]: [ PASS ] activated root profile at /root/.config/guix/current
[1618245330.001]: [ PASS ] group <guixbuild> created
[1618245330.698]: [ PASS ] user added <guixbuilder01>
[1618245331.389]: [ PASS ] user added <guixbuilder02>
[1618245332.274]: [ PASS ] user added <guixbuilder03>
[1618245332.907]: [ PASS ] user added <guixbuilder04>
[1618245333.583]: [ PASS ] user added <guixbuilder05>
[1618245334.203]: [ PASS ] user added <guixbuilder06>
[1618245334.874]: [ PASS ] user added <guixbuilder07>
[1618245335.520]: [ PASS ] user added <guixbuilder08>
[1618245336.215]: [ PASS ] user added <guixbuilder09>
[1618245336.853]: [ PASS ] user added <guixbuilder10>
Created symlink /etc/systemd/system/guix-daemon.service.wants/gnu-store.mount → /etc/systemd/system/gnu-store.mount.
Created symlink /etc/systemd/system/multi-user.target.wants/guix-daemon.service → /etc/systemd/system/guix-daemon.service.
[1618245337.848]: [ PASS ] enabled Guix daemon via systemd
[1618245337.849]: [ INFO ] making the guix command available to other users
Permit downloading pre-built package binaries from the project's build farm? (yes/no) yes
/home/roptat/guix-install.sh: line 445: /root/.config/guix/current/share/guix/ci.guix.gnu.org.pub: No such file or directory
[1618245340.514]: [ PASS ] installed shell completion
[1618245340.516]: [ INFO ] cleaning up /tmp/guix.ySI
[1618245340.528]: [ PASS ] Guix has successfully been installed!
[1618245340.529]: [ INFO ] Run 'info guix' to read the manual.
[1618245340.530]: [ INFO ] Please log out and back in to complete the installation.
--8<---------------cut here---------------end--------------->8---
We see these lines:
[ INFO ] Installing /var/guix and /gnu...
[ INFO ] Linking the root user's profile
[ PASS ] activated root profile at /root/.config/guix/current
which is evidence that ~root/.config/guix/current was created and is not
a dangling symlink. Further more, the binary tarball does contain that
.pub file:
--8<---------------cut here---------------start------------->8---
$ wget -qO - https://ftp.gnu.org/gnu/guix/guix-binary-1.2.0.x86_64-linux.tar.xz | xz -d | tar tv | grep '\.pub$'
-r--r--r-- root/root 118 1970-01-01 01:00 ./gnu/store/6rn4l3h0p9x0m615pp1ynlv9v0743kl3-guix-1.2.0/share/guix/berlin.guix.gnu.org.pub
-r--r--r-- root/root 118 1970-01-01 01:00 ./gnu/store/6rn4l3h0p9x0m615pp1ynlv9v0743kl3-guix-1.2.0/share/guix/ci.guix.gnu.org.pub
-r--r--r-- root/root 118 1970-01-01 01:00 ./gnu/store/6rn4l3h0p9x0m615pp1ynlv9v0743kl3-guix-1.2.0/share/guix/ci.guix.info.pub
--8<---------------cut here---------------end--------------->8---
So I don’t see what happened.
Julien, could it be that “something else” removed /root/.config or
/var/guix/profiles while it was running? Or… any other idea?
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#47734: Guix install script on foreign distro fails to add berlin public key
2021-04-21 19:56 ` Ludovic Courtès
@ 2021-04-25 19:54 ` Ludovic Courtès
0 siblings, 0 replies; 7+ messages in thread
From: Ludovic Courtès @ 2021-04-25 19:54 UTC (permalink / raw)
To: Julien Lepiller; +Cc: 47734
Ludovic Courtès <ludo@gnu.org> skribis:
> Julien, could it be that “something else” removed /root/.config or
> /var/guix/profiles while it was running? Or… any other idea?
Following our discussion on IRC, it seems likely that “something”
interfered with the installation process. Closing as “notabug”.
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2021-04-25 19:56 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-12 19:48 bug#47734: Guix install script on foreign distro fails to add berlin public key Julien Lepiller
2021-04-14 19:52 ` Leo Famulari
2021-04-20 0:48 ` Leo Famulari
2021-04-21 12:45 ` Ludovic Courtès
2021-04-21 15:46 ` Julien Lepiller
2021-04-21 19:56 ` Ludovic Courtès
2021-04-25 19:54 ` Ludovic Courtès
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).