* bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu
@ 2020-04-12 19:45 ryan
2020-04-13 10:46 ` Ludovic Courtès
0 siblings, 1 reply; 8+ messages in thread
From: ryan @ 2020-04-12 19:45 UTC (permalink / raw)
To: 40583
[-- Attachment #1: Type: text/plain, Size: 278 bytes --]
Hello,
I tried installing guix-system-install-1.0.1.i686-linux.iso on an old
eee pc, but if fails to build the amd package. This surprised me since
it has an intel atom processor inside it. Attached is the error log as
well as some hardware information.
Thanks,
Ryan
[-- Attachment #2: lscpu.txt --]
[-- Type: text/plain, Size: 845 bytes --]
Architecture: i686
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 2
Core(s) per socket: 1
Socket(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 28
Model name: Intel(R) Atom(TM) CPU N455 @ 1.66GHz
Stepping: 10
CPU MHz: 1662.491
CPU max MHz: 1667.0000
CPU min MHz: 1000.0000
BogoMIPS: 3324.75
L1d cache: 24K
L1i cache: 32K
L2 cache: 512K
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts cpuid aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm dtherm
[-- Attachment #3: lspci.txt --]
[-- Type: text/plain, Size: 1535 bytes --]
00:00.0 Host bridge: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 02)
01:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0)
02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
[-- Attachment #4: aq2v7vydnnxi2s5z0rkpinim7lfnra-xf86-video-amdgpu-19.0.1.drv.bz2 --]
[-- Type: application/x-bzip, Size: 4599 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu
2020-04-12 19:45 bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu ryan
@ 2020-04-13 10:46 ` Ludovic Courtès
2020-04-15 1:31 ` ryan
0 siblings, 1 reply; 8+ messages in thread
From: Ludovic Courtès @ 2020-04-13 10:46 UTC (permalink / raw)
To: ryan; +Cc: 40583
Hello ryan,
ryan <ryan.desfo@gmail.com> skribis:
> I tried installing guix-system-install-1.0.1.i686-linux.iso on an old
> eee pc, but if fails to build the amd package. This surprised me
> since it has an intel atom processor inside it. Attached is the error
> log as well as some hardware information.
There’s currently a release candidate (RC) available for testing that
fixes many things in the installer. Could you give it a try and report
back?
https://lists.gnu.org/archive/html/guix-devel/2020-04/msg00224.html
Thanks in advance,
Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu
2020-04-13 10:46 ` Ludovic Courtès
@ 2020-04-15 1:31 ` ryan
2020-04-15 8:12 ` Danny Milosavljevic
0 siblings, 1 reply; 8+ messages in thread
From: ryan @ 2020-04-15 1:31 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 40583
Hello Ludo,
I tried installing guix-system-install-1.1.0rc2.i686-linux.iso.
Unfortunately, I wasn't able to use this version either. The graphical
installer isn't visible due to the noise. I also had some issues
getting the logs off the eeepc, but dmesg ended with the following lines.
[ 27.510600] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR*
CPU pipe B FIFO underrun
[ 37.691363] [drm:drm_atomic_helper_wait_for_flip_done
[drm_kms_helper]] *ERROR* [CRTC:40:pipe B] flip_done timed out
[ 73.531406] [drm:drm_atomic_helper_wait_for_dependencies
[drm_kms_helper]] *ERROR* [CRTC:40:pipe B] flip_done timed out
[ 83.771388] [drm:drm_atomic_helper_wait_for_dependencies
[drm_kms_helper]] *ERROR* [CRTC:36:pipe B] flip_done timed out
[ 154.766788] perf: interrupt took too long (2581 > 2500), lowering
kernel.perf_event_max_sample_rate to 77250
[ 219.803568] perf: interrupt took too long (3261 > 3226), lowering
kernel.perf_event_max_sample_rate to 61250
[ 301.780855] perf: interrupt took too long (4078 > 4076), lowering
kernel.perf_event_max_sample_rate to 49000
Not sure if it's really enough info to help.
Take Care,
Ryan
On 4/13/20 6:46 AM, Ludovic Courtès wrote:
> Hello ryan,
>
> ryan <ryan.desfo@gmail.com> skribis:
>
>> I tried installing guix-system-install-1.0.1.i686-linux.iso on an old
>> eee pc, but if fails to build the amd package. This surprised me
>> since it has an intel atom processor inside it. Attached is the error
>> log as well as some hardware information.
> There’s currently a release candidate (RC) available for testing that
> fixes many things in the installer. Could you give it a try and report
> back?
>
> https://lists.gnu.org/archive/html/guix-devel/2020-04/msg00224.html
>
> Thanks in advance,
> Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu
2020-04-15 1:31 ` ryan
@ 2020-04-15 8:12 ` Danny Milosavljevic
2020-04-16 16:35 ` Ludovic Courtès
0 siblings, 1 reply; 8+ messages in thread
From: Danny Milosavljevic @ 2020-04-15 8:12 UTC (permalink / raw)
To: ryan; +Cc: 40583
[-- Attachment #1: Type: text/plain, Size: 113 bytes --]
Hi,
could you try installing the i686 version from
https://web.fdn.fr/~lcourtes/software/guix/1.1.0rc2.5/ ?
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu
2020-04-15 8:12 ` Danny Milosavljevic
@ 2020-04-16 16:35 ` Ludovic Courtès
2020-04-16 17:17 ` Ryan Desfosses
0 siblings, 1 reply; 8+ messages in thread
From: Ludovic Courtès @ 2020-04-16 16:35 UTC (permalink / raw)
To: Danny Milosavljevic; +Cc: ryan, 40583
Hi,
Danny Milosavljevic <dannym@scratchpost.org> skribis:
> could you try installing the i686 version from
> https://web.fdn.fr/~lcourtes/software/guix/1.1.0rc2.5/ ?
Or the just-released 1.1.0? It very likely fixes the “screen noise”
issue you encountered:
https://guix.gnu.org/download/
Thanks in advance,
Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu
2020-04-16 16:35 ` Ludovic Courtès
@ 2020-04-16 17:17 ` Ryan Desfosses
2020-04-17 8:23 ` Ludovic Courtès
0 siblings, 1 reply; 8+ messages in thread
From: Ryan Desfosses @ 2020-04-16 17:17 UTC (permalink / raw)
To: Ludovic Courtès
[-- Attachment #1: Type: text/plain, Size: 891 bytes --]
Ludo' and Danny,
I was able to install 1.1.orc2.5 last night. I didn't have the noise that
the previous version had, but I did have to plug in the ethernet cable
since I wasn't able to connect to wifi during the install.
Also, the same messages I sent in the previous email were still present. I
haven't had time to really test the system yet, but I was able to restart
the machine and log in.
Thank you both for your help.
Ryan
On Thu, Apr 16, 2020, 12:35 PM Ludovic Courtès <ludo@gnu.org> wrote:
> Hi,
>
> Danny Milosavljevic <dannym@scratchpost.org> skribis:
>
> > could you try installing the i686 version from
> > https://web.fdn.fr/~lcourtes/software/guix/1.1.0rc2.5/ ?
>
> Or the just-released 1.1.0? It very likely fixes the “screen noise”
> issue you encountered:
>
> https://guix.gnu.org/download/
>
> Thanks in advance,
> Ludo’.
>
[-- Attachment #2: Type: text/html, Size: 1700 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu
2020-04-16 17:17 ` Ryan Desfosses
@ 2020-04-17 8:23 ` Ludovic Courtès
2020-04-19 19:25 ` ryan
0 siblings, 1 reply; 8+ messages in thread
From: Ludovic Courtès @ 2020-04-17 8:23 UTC (permalink / raw)
To: Ryan Desfosses; +Cc: 40583
Hi Ryan,
Ryan Desfosses <ryan.desfo@gmail.com> skribis:
> I was able to install 1.1.orc2.5 last night. I didn't have the noise that
> the previous version had, but I did have to plug in the ethernet cable
> since I wasn't able to connect to wifi during the install.
OK. Why exactly weren’t you able to connect to WiFi? Did you get an
error message or something?
> Also, the same messages I sent in the previous email were still present. I
> haven't had time to really test the system yet, but I was able to restart
> the machine and log in.
Messages from the kernel like:
[ 27.510600] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
are probably “OK”.
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu
2020-04-17 8:23 ` Ludovic Courtès
@ 2020-04-19 19:25 ` ryan
0 siblings, 0 replies; 8+ messages in thread
From: ryan @ 2020-04-19 19:25 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 40583
[-- Attachment #1: Type: text/plain, Size: 1600 bytes --]
Ludo',
During the install process after selecting "wifi" there would be a
prompt saying "Connecting to 'hostname', please wait" and just seemed to
hang. Below are selection:
local: english
territory: United States
graphical installer using a terminal based interface
america
New_York
English (US)
English (US)
enter "hostname"
select wifi
select network
- prompt "Connecting to 'hostname', please wait" (never prompts for
password)
- switch virtual terminals (saved dmesg, guix version, and copied
messages file [attached])
Note, wifi was working after I installed guix with ethernet cable. In
the next week or so I'll try to download 1.1 and see if issue has been
resolved.
Thanks,
Ryan
On 4/17/20 4:23 AM, Ludovic Courtès wrote:
> Hi Ryan,
>
> Ryan Desfosses <ryan.desfo@gmail.com> skribis:
>
>> I was able to install 1.1.orc2.5 last night. I didn't have the noise that
>> the previous version had, but I did have to plug in the ethernet cable
>> since I wasn't able to connect to wifi during the install.
> OK. Why exactly weren’t you able to connect to WiFi? Did you get an
> error message or something?
>
>> Also, the same messages I sent in the previous email were still present. I
>> haven't had time to really test the system yet, but I was able to restart
>> the machine and log in.
> Messages from the kernel like:
>
> [ 27.510600] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe B FIFO underrun
>
> are probably “OK”.
>
> Thanks,
> Ludo’.
[-- Attachment #2: guix_install_messages_19Apr20.log --]
[-- Type: text/x-log, Size: 86665 bytes --]
Apr 19 20:04:43 localhost syslogd (GNU inetutils 1.9.4): restart
Apr 19 20:04:43 localhost vmunix: [ 0.000000] Linux version 5.4.31-gnu (nixbld@) (gcc version 7.4.0 (GCC)) #1 SMP 1
Apr 19 20:04:43 localhost vmunix: [ 0.000000] KERNEL supported cpus:
Apr 19 20:04:43 localhost vmunix: [ 0.000000] Intel GenuineIntel
Apr 19 20:04:43 localhost vmunix: [ 0.000000] AMD AuthenticAMD
Apr 19 20:04:43 localhost vmunix: [ 0.000000] Hygon HygonGenuine
Apr 19 20:04:43 localhost vmunix: [ 0.000000] NSC Geode by NSC
Apr 19 20:04:43 localhost vmunix: [ 0.000000] Cyrix CyrixInstead
Apr 19 20:04:43 localhost vmunix: [ 0.000000] Centaur CentaurHauls
Apr 19 20:04:43 localhost vmunix: [ 0.000000] Transmeta GenuineTMx86
Apr 19 20:04:43 localhost vmunix: [ 0.000000] Transmeta TransmetaCPU
Apr 19 20:04:43 localhost vmunix: [ 0.000000] UMC UMC UMC UMC
Apr 19 20:04:43 localhost vmunix: [ 0.000000] zhaoxin Shanghai
Apr 19 20:04:43 localhost vmunix: [ 0.000000] x86/fpu: x87 FPU will use FXSAVE
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-provided physical RAM map:
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f68ffff] usable
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x000000007f690000-0x000000007f69dfff] ACPI data
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x000000007f69e000-0x000000007f6dffff] ACPI NVS
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x000000007f6e0000-0x000000007fffffff] reserved
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Apr 19 20:04:43 localhost vmunix: [ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
Apr 19 20:04:43 localhost vmunix: [ 0.000000] NX (Execute Disable) protection: active
Apr 19 20:04:43 localhost vmunix: [ 0.000000] SMBIOS 2.6 present.
Apr 19 20:04:43 localhost vmunix: [ 0.000000] DMI: ASUSTeK Computer INC. T101MT/T101MT, BIOS 0601 07/26/2010
Apr 19 20:04:43 localhost vmunix: [ 0.000000] tsc: Fast TSC calibration using PIT
Apr 19 20:04:43 localhost vmunix: [ 0.000000] tsc: Detected 1662.484 MHz processor
Apr 19 20:04:43 localhost vmunix: [ 0.006601] last_pfn = 0x7f690 max_arch_pfn = 0x1000000
Apr 19 20:04:43 localhost vmunix: [ 0.006863] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
Apr 19 20:04:43 localhost vmunix: [ 0.006983] total RAM covered: 2039M
Apr 19 20:04:43 localhost vmunix: [ 0.008227] Found optimal setting for mtrr clean up
Apr 19 20:04:43 localhost vmunix: [ 0.008231] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
Apr 19 20:04:43 localhost vmunix: [ 0.018669] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
Apr 19 20:04:43 localhost vmunix: [ 0.027405] check: Scanning 1 areas for low memory corruption
Apr 19 20:04:43 localhost vmunix: [ 0.027612] RAMDISK: [mem 0x36c41000-0x37617fff]
Apr 19 20:04:43 localhost vmunix: [ 0.027618] Allocated new RAMDISK: [mem 0x3626a000-0x36c408cf]
Apr 19 20:04:43 localhost vmunix: [ 0.040729] Move RAMDISK from [mem 0x36c41000-0x376178cf] to [mem 0x3626a000-0x36c408cf]
Apr 19 20:04:43 localhost vmunix: [ 0.040748] ACPI: Early table checksum verification disabled
Apr 19 20:04:43 localhost vmunix: [ 0.040759] ACPI: RSDP 0x00000000000FBEF0 000024 (v02 ACPIAM)
Apr 19 20:04:43 localhost vmunix: [ 0.040770] ACPI: XSDT 0x000000007F690100 00006C (v01 _ASUS_ Notebook 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040787] ACPI: FACP 0x000000007F690290 0000F4 (v04 A_M_I_ OEMFACP 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040806] ACPI: DSDT 0x000000007F690490 008456 (v02 A1437 A1437000 00000000 INTL 20051117)
Apr 19 20:04:43 localhost vmunix: [ 0.040819] ACPI: FACS 0x000000007F69E000 000040
Apr 19 20:04:43 localhost vmunix: [ 0.040829] ACPI: FACS 0x000000007F69E000 000040
Apr 19 20:04:43 localhost shepherd[1]: Service syslogd has been started.
Apr 19 20:04:43 localhost vmunix: [ 0.040838] ACPI: APIC 0x000000007F690390 00005C (v02 A_M_I_ OEMAPIC 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040851] ACPI: MCFG 0x000000007F6903F0 00003C (v01 A_M_I_ OEMMCFG 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040863] ACPI: ECDT 0x000000007F690430 000055 (v01 A_M_I_ OEMECDT 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040875] ACPI: OEMB 0x000000007F69E040 000061 (v01 A_M_I_ AMI_OEM 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040888] ACPI: HPET 0x000000007F6988F0 000038 (v01 A_M_I_ OEMHPET 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040900] ACPI: GSCI 0x000000007F69E0B0 002024 (v01 A_M_I_ GMCHSCI 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040913] ACPI: SSDT 0x000000007F6A0DF0 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
Apr 19 20:04:43 localhost vmunix: [ 0.040925] ACPI: SLIC 0x000000007F698930 000176 (v01 _ASUS_ Notebook 07001026 MSFT 00000097)
Apr 19 20:04:43 localhost vmunix: [ 0.040971] 1152MB HIGHMEM available.
Apr 19 20:04:43 localhost vmunix: [ 0.040977] 885MB LOWMEM available.
Apr 19 20:04:43 localhost vmunix: [ 0.040980] mapped low ram: 0 - 375fe000
Apr 19 20:04:43 localhost vmunix: [ 0.040982] low ram: 0 - 375fe000
Apr 19 20:04:43 localhost vmunix: [ 0.045076] Zone ranges:
Apr 19 20:04:43 localhost vmunix: [ 0.045080] DMA [mem 0x0000000000001000-0x0000000000ffffff]
Apr 19 20:04:43 localhost vmunix: [ 0.045086] Normal [mem 0x0000000001000000-0x00000000375fdfff]
Apr 19 20:04:43 localhost vmunix: [ 0.045090] HighMem [mem 0x00000000375fe000-0x000000007f68ffff]
Apr 19 20:04:43 localhost vmunix: [ 0.045094] Movable zone start for each node
Apr 19 20:04:43 localhost vmunix: [ 0.045096] Early memory node ranges
Apr 19 20:04:43 localhost vmunix: [ 0.045100] node 0: [mem 0x0000000000001000-0x000000000009efff]
Apr 19 20:04:43 localhost vmunix: [ 0.045105] node 0: [mem 0x0000000000100000-0x000000007f68ffff]
Apr 19 20:04:43 localhost vmunix: [ 0.045203] Zeroed struct page in unavailable ranges: 2514 pages
Apr 19 20:04:43 localhost vmunix: [ 0.045208] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f68ffff]
Apr 19 20:04:43 localhost vmunix: [ 0.071312] Using APIC driver default
Apr 19 20:04:43 localhost vmunix: [ 0.071329] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff]
Apr 19 20:04:43 localhost vmunix: [ 0.071544] ACPI: PM-Timer IO Port: 0x808
Apr 19 20:04:43 localhost vmunix: [ 0.071581] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Apr 19 20:04:43 localhost vmunix: [ 0.071589] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Apr 19 20:04:43 localhost vmunix: [ 0.071595] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Apr 19 20:04:43 localhost vmunix: [ 0.071611] Using ACPI (MADT) for SMP configuration information
Apr 19 20:04:43 localhost vmunix: [ 0.071616] ACPI: HPET id: 0xffffffff base: 0xfed00000
Apr 19 20:04:43 localhost vmunix: [ 0.071632] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
Apr 19 20:04:43 localhost vmunix: [ 0.071671] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Apr 19 20:04:43 localhost vmunix: [ 0.071677] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Apr 19 20:04:43 localhost vmunix: [ 0.071680] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
Apr 19 20:04:43 localhost vmunix: [ 0.071683] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
Apr 19 20:04:43 localhost vmunix: [ 0.071690] [mem 0x80000000-0xfedfffff] available for PCI devices
Apr 19 20:04:43 localhost vmunix: [ 0.071693] Booting paravirtualized kernel on bare hardware
Apr 19 20:04:43 localhost vmunix: [ 0.071703] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Apr 19 20:04:43 localhost vmunix: [ 0.071722] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
Apr 19 20:04:43 localhost vmunix: [ 0.072038] percpu: Embedded 33 pages/cpu s103948 r0 d31220 u135168
Apr 19 20:04:43 localhost vmunix: [ 0.072118] Built 1 zonelists, mobility grouping on. Total pages: 519559
Apr 19 20:04:43 localhost vmunix: [ 0.072126] Kernel command line: BOOT_IMAGE=/gnu/store/506a8398hzkdqcm6y7r45fm0dvpaagks-linux-libre-5.4.31/bzImage --root=31393730-3031-3031-3139-343934363833 --system=/gnu/store/sm6p8h5mwd18ynj1pm0gqfyy0l5zph6a-system --load=/gnu/store/sm6p8h5mwd18ynj1pm0gqfyy0l5zph6a-system/boot quiet modprobe.blacklist=radeon
Apr 19 20:04:43 localhost vmunix: [ 0.072779] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Apr 19 20:04:43 localhost vmunix: [ 0.072991] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Apr 19 20:04:43 localhost vmunix: [ 0.073020] Initializing CPU#0
Apr 19 20:04:43 localhost vmunix: [ 0.073031] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
Apr 19 20:04:43 localhost vmunix: [ 0.126982] Initializing HighMem for node 0 (000375fe:0007f690)
Apr 19 20:04:43 localhost vmunix: [ 0.270572] Initializing Movable for node 0 (00000000:00000000)
Apr 19 20:04:43 localhost vmunix: [ 0.280026] Memory: 1972520K/2087096K available (9653K kernel code, 926K rwdata, 3720K rodata, 1212K init, 820K bss, 114576K reserved, 0K cma-reserved, 1180232K highmem)
Apr 19 20:04:43 localhost vmunix: [ 0.280041] virtual kernel memory layout:
Apr 19 20:04:43 localhost vmunix: [ 0.280041] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
Apr 19 20:04:43 localhost vmunix: [ 0.280041] cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
Apr 19 20:04:43 localhost vmunix: [ 0.280041] pkmap : 0xff600000 - 0xff800000 (2048 kB)
Apr 19 20:04:43 localhost vmunix: [ 0.280041] vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
Apr 19 20:04:43 localhost vmunix: [ 0.280041] lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
Apr 19 20:04:43 localhost vmunix: [ 0.280041] .init : 0xcee0f000 - 0xcef3e000 (1212 kB)
Apr 19 20:04:43 localhost vmunix: [ 0.280041] .data : 0xce96d4cc - 0xcedf98c0 (4656 kB)
Apr 19 20:04:43 localhost vmunix: [ 0.280041] .text : 0xce000000 - 0xce96d4cc (9653 kB)
Apr 19 20:04:43 localhost vmunix: [ 0.280043] Checking if this processor honours the WP bit even in supervisor mode...Ok.
Apr 19 20:04:43 localhost vmunix: [ 0.280079] random: get_random_u32 called from __kmem_cache_create+0x35/0x490 with crng_init=0
Apr 19 20:04:43 localhost vmunix: [ 0.280713] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Apr 19 20:04:43 localhost vmunix: [ 0.280758] ftrace: allocating 39672 entries in 78 pages
Apr 19 20:04:43 localhost vmunix: [ 0.331209] rcu: Hierarchical RCU implementation.
Apr 19 20:04:43 localhost vmunix: [ 0.331213] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
Apr 19 20:04:43 localhost vmunix: [ 0.331218] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Apr 19 20:04:43 localhost vmunix: [ 0.331221] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Apr 19 20:04:43 localhost vmunix: [ 0.342925] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
Apr 19 20:04:43 localhost vmunix: [ 0.346215] Console: colour VGA+ 80x25
Apr 19 20:04:43 localhost vmunix: [ 0.346226] printk: console [tty0] enabled
Apr 19 20:04:43 localhost vmunix: [ 0.346252] ACPI: Core revision 20190816
Apr 19 20:04:43 localhost vmunix: [ 0.346572] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Apr 19 20:04:43 localhost vmunix: [ 0.346602] APIC: Switch to symmetric I/O mode setup
Apr 19 20:04:43 localhost vmunix: [ 0.346606] Enabling APIC mode: Flat. Using 1 I/O APICs
Apr 19 20:04:43 localhost vmunix: [ 0.347251] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Apr 19 20:04:43 localhost vmunix: [ 0.366605] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17f6b730dc7, max_idle_ns: 440795216274 ns
Apr 19 20:04:43 localhost vmunix: [ 0.366618] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.96 BogoMIPS (lpj=6649936)
Apr 19 20:04:43 localhost vmunix: [ 0.366626] pid_max: default: 32768 minimum: 301
Apr 19 20:04:43 localhost vmunix: [ 0.366770] LSM: Security Framework initializing
Apr 19 20:04:43 localhost vmunix: [ 0.366813] Yama: becoming mindful.
Apr 19 20:04:43 localhost vmunix: [ 0.366906] AppArmor: AppArmor initialized
Apr 19 20:04:43 localhost vmunix: [ 0.366912] TOMOYO Linux initialized
Apr 19 20:04:43 localhost vmunix: [ 0.367040] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Apr 19 20:04:43 localhost vmunix: [ 0.367049] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
Apr 19 20:04:43 localhost vmunix: [ 0.367102] *** VALIDATE tmpfs ***
Apr 19 20:04:43 localhost vmunix: [ 0.367530] *** VALIDATE proc ***
Apr 19 20:04:43 localhost vmunix: [ 0.367714] *** VALIDATE cgroup1 ***
Apr 19 20:04:43 localhost vmunix: [ 0.367719] *** VALIDATE cgroup2 ***
Apr 19 20:04:43 localhost vmunix: [ 0.367829] mce: CPU0: Thermal monitoring enabled (TM2)
Apr 19 20:04:43 localhost vmunix: [ 0.367836] process: using mwait in idle threads
Apr 19 20:04:43 localhost vmunix: [ 0.367850] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Apr 19 20:04:43 localhost vmunix: [ 0.367854] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
Apr 19 20:04:43 localhost vmunix: [ 0.368124] Freeing SMP alternatives memory: 28K
Apr 19 20:04:43 localhost vmunix: [ 0.486553] smpboot: CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
Apr 19 20:04:43 localhost vmunix: [ 0.486611] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
Apr 19 20:04:43 localhost vmunix: [ 0.486611] ... version: 3
Apr 19 20:04:43 localhost vmunix: [ 0.486611] ... bit width: 40
Apr 19 20:04:43 localhost vmunix: [ 0.486611] ... generic registers: 2
Apr 19 20:04:43 localhost vmunix: [ 0.486611] ... value mask: 000000ffffffffff
Apr 19 20:04:43 localhost vmunix: [ 0.486611] ... max period: 000000007fffffff
Apr 19 20:04:43 localhost vmunix: [ 0.486611] ... fixed-purpose events: 3
Apr 19 20:04:43 localhost vmunix: [ 0.486611] ... event mask: 0000000700000003
Apr 19 20:04:43 localhost vmunix: [ 0.486611] rcu: Hierarchical SRCU implementation.
Apr 19 20:04:43 localhost vmunix: [ 0.486611] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Apr 19 20:04:43 localhost vmunix: [ 0.486611] smp: Bringing up secondary CPUs ...
Apr 19 20:04:43 localhost vmunix: [ 0.486611] x86: Booting SMP configuration:
Apr 19 20:04:43 localhost vmunix: [ 0.486611] .... node #0, CPUs: #1
Apr 19 20:04:43 localhost vmunix: [ 0.007295] Initializing CPU#1
Apr 19 20:04:43 localhost vmunix: [ 0.007295] Disabled fast string operations
Apr 19 20:04:43 localhost vmunix: [ 0.486840] smp: Brought up 1 node, 2 CPUs
Apr 19 20:04:43 localhost vmunix: [ 0.486840] smpboot: Max logical packages: 1
Apr 19 20:04:43 localhost vmunix: [ 0.486840] smpboot: Total of 2 processors activated (6649.93 BogoMIPS)
Apr 19 20:04:43 localhost vmunix: [ 0.488800] allocated 2097152 bytes of page_ext
Apr 19 20:04:43 localhost vmunix: [ 0.488964] devtmpfs: initialized
Apr 19 20:04:43 localhost vmunix: [ 0.490820] PM: Registering ACPI NVS region [mem 0x7f69e000-0x7f6dffff] (270336 bytes)
Apr 19 20:04:43 localhost vmunix: [ 0.491069] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Apr 19 20:04:43 localhost vmunix: [ 0.491091] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
Apr 19 20:04:43 localhost vmunix: [ 0.491313] pinctrl core: initialized pinctrl subsystem
Apr 19 20:04:43 localhost vmunix: [ 0.491653] PM: RTC time: 18:04:19, date: 2020-04-19
Apr 19 20:04:43 localhost vmunix: [ 0.491944] NET: Registered protocol family 16
Apr 19 20:04:43 localhost vmunix: [ 0.492388] audit: initializing netlink subsys (disabled)
Apr 19 20:04:43 localhost vmunix: [ 0.492442] audit: type=2000 audit(1587319458.144:1): state=initialized audit_enabled=0 res=1
Apr 19 20:04:43 localhost vmunix: [ 0.492442] EISA bus registered
Apr 19 20:04:43 localhost vmunix: [ 0.492442] cpuidle: using governor ladder
Apr 19 20:04:43 localhost vmunix: [ 0.492442] cpuidle: using governor menu
Apr 19 20:04:43 localhost vmunix: [ 0.492442] ACPI: bus type PCI registered
Apr 19 20:04:43 localhost vmunix: [ 0.492442] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Apr 19 20:04:43 localhost vmunix: [ 0.492442] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Apr 19 20:04:43 localhost vmunix: [ 0.492442] PCI: not using MMCONFIG
Apr 19 20:04:43 localhost vmunix: [ 0.495108] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
Apr 19 20:04:43 localhost vmunix: [ 0.495198] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
Apr 19 20:04:43 localhost vmunix: [ 0.495201] PCI: Using configuration type 1 for base access
Apr 19 20:04:43 localhost vmunix: [ 0.501597] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Apr 19 20:04:43 localhost vmunix: [ 0.510980] ACPI: Added _OSI(Module Device)
Apr 19 20:04:43 localhost vmunix: [ 0.510984] ACPI: Added _OSI(Processor Device)
Apr 19 20:04:43 localhost vmunix: [ 0.510987] ACPI: Added _OSI(3.0 _SCP Extensions)
Apr 19 20:04:43 localhost vmunix: [ 0.510990] ACPI: Added _OSI(Processor Aggregator Device)
Apr 19 20:04:43 localhost vmunix: [ 0.510995] ACPI: Added _OSI(Linux-Dell-Video)
Apr 19 20:04:43 localhost vmunix: [ 0.510999] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
Apr 19 20:04:43 localhost vmunix: [ 0.511002] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
Apr 19 20:04:43 localhost vmunix: [ 0.527031] ACPI: 2 ACPI AML tables successfully acquired and loaded
Apr 19 20:04:43 localhost vmunix: [ 0.528192] ACPI: EC: EC started
Apr 19 20:04:43 localhost vmunix: [ 0.528195] ACPI: EC: interrupt blocked
Apr 19 20:04:43 localhost vmunix: [ 0.529788] ACPI: \: Used as first EC
Apr 19 20:04:43 localhost vmunix: [ 0.529794] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Apr 19 20:04:43 localhost vmunix: [ 0.529796] ACPI: EC: Boot ECDT EC used to handle transactions
Apr 19 20:04:43 localhost vmunix: [ 0.535530] ACPI: Dynamic OEM Table Load:
Apr 19 20:04:43 localhost vmunix: [ 0.536043] ACPI: SSDT 0x00000000F0D31800 000326 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
Apr 19 20:04:43 localhost vmunix: [ 0.539538] ACPI: Dynamic OEM Table Load:
Apr 19 20:04:43 localhost vmunix: [ 0.539557] ACPI: SSDT 0x00000000F0C0C000 000724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Apr 19 20:04:43 localhost vmunix: [ 0.541782] ACPI: Dynamic OEM Table Load:
Apr 19 20:04:43 localhost vmunix: [ 0.541796] ACPI: SSDT 0x00000000F0D31000 000217 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
Apr 19 20:04:43 localhost vmunix: [ 0.543222] ACPI: Dynamic OEM Table Load:
Apr 19 20:04:43 localhost vmunix: [ 0.543234] ACPI: SSDT 0x00000000F049B840 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
Apr 19 20:04:43 localhost vmunix: [ 0.544770] ACPI: Interpreter enabled
Apr 19 20:04:43 localhost vmunix: [ 0.544839] ACPI: (supports S0 S3 S4 S5)
Apr 19 20:04:43 localhost vmunix: [ 0.544843] ACPI: Using IOAPIC for interrupt routing
Apr 19 20:04:43 localhost vmunix: [ 0.544959] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Apr 19 20:04:43 localhost vmunix: [ 0.546483] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Apr 19 20:04:43 localhost vmunix: [ 0.546486] PCI: Using MMCONFIG for extended config space
Apr 19 20:04:43 localhost vmunix: [ 0.546499] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Apr 19 20:04:43 localhost vmunix: [ 0.547107] ACPI: Enabled 4 GPEs in block 00 to 1F
Apr 19 20:04:43 localhost vmunix: [ 0.561672] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Apr 19 20:04:43 localhost vmunix: [ 0.565472] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Apr 19 20:04:43 localhost vmunix: [ 0.565488] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
Apr 19 20:04:43 localhost vmunix: [ 0.565504] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Apr 19 20:04:43 localhost vmunix: [ 0.566144] PCI host bridge to bus 0000:00
Apr 19 20:04:43 localhost vmunix: [ 0.566152] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
Apr 19 20:04:43 localhost vmunix: [ 0.566158] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
Apr 19 20:04:43 localhost vmunix: [ 0.566163] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Apr 19 20:04:43 localhost vmunix: [ 0.566169] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
Apr 19 20:04:43 localhost vmunix: [ 0.566175] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xfed8ffff window]
Apr 19 20:04:43 localhost vmunix: [ 0.566180] pci_bus 0000:00: root bus resource [bus 00-ff]
Apr 19 20:04:43 localhost vmunix: [ 0.566208] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
Apr 19 20:04:43 localhost vmunix: [ 0.566464] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
Apr 19 20:04:43 localhost vmunix: [ 0.566484] pci 0000:00:02.0: reg 0x10: [mem 0xf7e00000-0xf7e7ffff]
Apr 19 20:04:43 localhost vmunix: [ 0.566493] pci 0000:00:02.0: reg 0x14: [io 0xdc00-0xdc07]
Apr 19 20:04:43 localhost vmunix: [ 0.566503] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
Apr 19 20:04:43 localhost vmunix: [ 0.566512] pci 0000:00:02.0: reg 0x1c: [mem 0xf7d00000-0xf7dfffff]
Apr 19 20:04:43 localhost vmunix: [ 0.566829] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
Apr 19 20:04:43 localhost vmunix: [ 0.566847] pci 0000:00:02.1: reg 0x10: [mem 0xf7e80000-0xf7efffff]
Apr 19 20:04:43 localhost vmunix: [ 0.567135] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
Apr 19 20:04:43 localhost vmunix: [ 0.567180] pci 0000:00:1b.0: reg 0x10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
Apr 19 20:04:43 localhost vmunix: [ 0.567318] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Apr 19 20:04:43 localhost vmunix: [ 0.567556] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
Apr 19 20:04:43 localhost vmunix: [ 0.567730] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Apr 19 20:04:43 localhost vmunix: [ 0.568049] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
Apr 19 20:04:43 localhost vmunix: [ 0.568216] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Apr 19 20:04:43 localhost vmunix: [ 0.568519] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
Apr 19 20:04:43 localhost vmunix: [ 0.568685] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Apr 19 20:04:43 localhost vmunix: [ 0.568988] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
Apr 19 20:04:43 localhost vmunix: [ 0.569061] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
Apr 19 20:04:43 localhost vmunix: [ 0.569367] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
Apr 19 20:04:43 localhost vmunix: [ 0.569441] pci 0000:00:1d.1: reg 0x20: [io 0xd480-0xd49f]
Apr 19 20:04:43 localhost vmunix: [ 0.569733] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
Apr 19 20:04:43 localhost vmunix: [ 0.569806] pci 0000:00:1d.2: reg 0x20: [io 0xd800-0xd81f]
Apr 19 20:04:43 localhost vmunix: [ 0.570101] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
Apr 19 20:04:43 localhost vmunix: [ 0.570174] pci 0000:00:1d.3: reg 0x20: [io 0xd880-0xd89f]
Apr 19 20:04:43 localhost vmunix: [ 0.570474] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
Apr 19 20:04:43 localhost vmunix: [ 0.570510] pci 0000:00:1d.7: reg 0x10: [mem 0xf7cf7c00-0xf7cf7fff]
Apr 19 20:04:43 localhost vmunix: [ 0.570656] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Apr 19 20:04:43 localhost vmunix: [ 0.570938] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
Apr 19 20:04:43 localhost vmunix: [ 0.571309] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
Apr 19 20:04:44 localhost vmunix: [ 0.571721] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
Apr 19 20:04:44 localhost vmunix: [ 0.571757] pci 0000:00:1f.2: reg 0x10: [io 0xd080-0xd087]
Apr 19 20:04:44 localhost vmunix: [ 0.571774] pci 0000:00:1f.2: reg 0x14: [io 0xd000-0xd003]
Apr 19 20:04:44 localhost vmunix: [ 0.571789] pci 0000:00:1f.2: reg 0x18: [io 0xcc00-0xcc07]
Apr 19 20:04:44 localhost vmunix: [ 0.571804] pci 0000:00:1f.2: reg 0x1c: [io 0xc880-0xc883]
Apr 19 20:04:44 localhost vmunix: [ 0.571820] pci 0000:00:1f.2: reg 0x20: [io 0xc800-0xc81f]
Apr 19 20:04:44 localhost vmunix: [ 0.571837] pci 0000:00:1f.2: reg 0x24: [mem 0xf7cf7800-0xf7cf7bff]
Apr 19 20:04:44 localhost vmunix: [ 0.571917] pci 0000:00:1f.2: PME# supported from D3hot
Apr 19 20:04:44 localhost vmunix: [ 0.572292] pci 0000:00:1c.0: PCI bridge to [bus 04]
Apr 19 20:04:44 localhost vmunix: [ 0.572432] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
Apr 19 20:04:44 localhost vmunix: [ 0.572495] pci 0000:02:00.0: reg 0x10: [mem 0xfbff0000-0xfbffffff 64bit]
Apr 19 20:04:44 localhost vmunix: [ 0.572716] pci 0000:02:00.0: supports D1
Apr 19 20:04:44 localhost vmunix: [ 0.572722] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
Apr 19 20:04:44 localhost vmunix: [ 0.572968] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
Apr 19 20:04:44 localhost vmunix: [ 0.572981] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
Apr 19 20:04:44 localhost vmunix: [ 0.572993] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.573121] pci 0000:01:00.0: [1969:1062] type 00 class 0x020000
Apr 19 20:04:44 localhost vmunix: [ 0.573179] pci 0000:01:00.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
Apr 19 20:04:44 localhost vmunix: [ 0.573199] pci 0000:01:00.0: reg 0x18: [io 0xec00-0xec7f]
Apr 19 20:04:44 localhost vmunix: [ 0.573382] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 19 20:04:44 localhost vmunix: [ 0.573613] pci 0000:00:1c.3: PCI bridge to [bus 01]
Apr 19 20:04:44 localhost vmunix: [ 0.573622] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
Apr 19 20:04:44 localhost vmunix: [ 0.573630] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
Apr 19 20:04:44 localhost vmunix: [ 0.573671] pci_bus 0000:05: extended config space not accessible
Apr 19 20:04:44 localhost vmunix: [ 0.573788] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
Apr 19 20:04:44 localhost vmunix: [ 0.573807] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
Apr 19 20:04:44 localhost vmunix: [ 0.573813] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
Apr 19 20:04:44 localhost vmunix: [ 0.573818] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
Apr 19 20:04:44 localhost vmunix: [ 0.573823] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
Apr 19 20:04:44 localhost vmunix: [ 0.573829] pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xfed8ffff window] (subtractive decode)
Apr 19 20:04:44 localhost vmunix: [ 0.575773] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
Apr 19 20:04:44 localhost vmunix: [ 0.575972] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Apr 19 20:04:44 localhost vmunix: [ 0.576168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Apr 19 20:04:44 localhost vmunix: [ 0.576363] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Apr 19 20:04:44 localhost vmunix: [ 0.576557] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Apr 19 20:04:44 localhost vmunix: [ 0.576754] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Apr 19 20:04:44 localhost vmunix: [ 0.576949] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Apr 19 20:04:44 localhost vmunix: [ 0.577145] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
Apr 19 20:04:44 localhost vmunix: [ 0.577682] ACPI: EC: interrupt unblocked
Apr 19 20:04:44 localhost vmunix: [ 0.577702] ACPI: EC: event unblocked
Apr 19 20:04:44 localhost vmunix: [ 0.577717] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
Apr 19 20:04:44 localhost vmunix: [ 0.577723] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
Apr 19 20:04:44 localhost vmunix: [ 0.578055] iommu: Default domain type: Translated
Apr 19 20:04:44 localhost vmunix: [ 0.578123] pci 0000:00:02.0: vgaarb: setting as boot VGA device
Apr 19 20:04:44 localhost vmunix: [ 0.578123] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Apr 19 20:04:44 localhost vmunix: [ 0.578123] pci 0000:00:02.0: vgaarb: bridge control possible
Apr 19 20:04:44 localhost vmunix: [ 0.578123] vgaarb: loaded
Apr 19 20:04:44 localhost vmunix: [ 0.579055] SCSI subsystem initialized
Apr 19 20:04:44 localhost vmunix: [ 0.579299] ACPI: bus type USB registered
Apr 19 20:04:44 localhost vmunix: [ 0.579357] usbcore: registered new interface driver usbfs
Apr 19 20:04:44 localhost vmunix: [ 0.579387] usbcore: registered new interface driver hub
Apr 19 20:04:44 localhost vmunix: [ 0.579440] usbcore: registered new device driver usb
Apr 19 20:04:44 localhost vmunix: [ 0.579688] EDAC MC: Ver: 3.0.0
Apr 19 20:04:44 localhost vmunix: [ 0.580197] PCI: Using ACPI for IRQ routing
Apr 19 20:04:44 localhost vmunix: [ 0.580346] Expanded resource Reserved due to conflict with PCI Bus 0000:00
Apr 19 20:04:44 localhost vmunix: [ 0.580750] NetLabel: Initializing
Apr 19 20:04:44 localhost vmunix: [ 0.580754] NetLabel: domain hash size = 128
Apr 19 20:04:44 localhost vmunix: [ 0.580756] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
Apr 19 20:04:44 localhost vmunix: [ 0.580803] NetLabel: unlabeled traffic allowed by default
Apr 19 20:04:44 localhost vmunix: [ 0.580871] hpet: 3 channels of 0 reserved for per-cpu timers
Apr 19 20:04:44 localhost vmunix: [ 0.580871] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Apr 19 20:04:44 localhost vmunix: [ 0.580871] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Apr 19 20:04:44 localhost vmunix: [ 0.582691] clocksource: Switched to clocksource tsc-early
Apr 19 20:04:44 localhost vmunix: [ 0.636982] *** VALIDATE bpf ***
Apr 19 20:04:44 localhost vmunix: [ 0.637210] VFS: Disk quotas dquot_6.6.0
Apr 19 20:04:44 localhost vmunix: [ 0.637263] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Apr 19 20:04:44 localhost vmunix: [ 0.637336] *** VALIDATE ramfs ***
Apr 19 20:04:44 localhost vmunix: [ 0.637350] *** VALIDATE hugetlbfs ***
Apr 19 20:04:44 localhost vmunix: [ 0.637720] AppArmor: AppArmor Filesystem Enabled
Apr 19 20:04:44 localhost vmunix: [ 0.637831] pnp: PnP ACPI init
Apr 19 20:04:44 localhost vmunix: [ 0.638074] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.638082] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639224] system 00:04: [io 0x025c-0x025f] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639232] system 00:04: [io 0x0380-0x0383] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639238] system 00:04: [io 0x0400-0x041f] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639245] system 00:04: [io 0x04d0-0x04d1] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639251] system 00:04: [io 0x0800-0x087f] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639257] system 00:04: [io 0x0480-0x04bf] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639266] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639272] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639279] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639285] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639292] system 00:04: [mem 0xfff00000-0xffffffff] could not be reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639679] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639687] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.639915] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
Apr 19 20:04:44 localhost vmunix: [ 0.640620] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
Apr 19 20:04:44 localhost vmunix: [ 0.640628] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
Apr 19 20:04:44 localhost vmunix: [ 0.640634] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
Apr 19 20:04:44 localhost vmunix: [ 0.640641] system 00:07: [mem 0x00100000-0x7f6fffff] could not be reserved
Apr 19 20:04:44 localhost vmunix: [ 0.640647] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
Apr 19 20:04:44 localhost vmunix: [ 0.641201] pnp: PnP ACPI: found 8 devices
Apr 19 20:04:44 localhost vmunix: [ 0.641208] PnPBIOS: Disabled by ACPI PNP
Apr 19 20:04:44 localhost vmunix: [ 0.648416] thermal_sys: Registered thermal governor 'fair_share'
Apr 19 20:04:44 localhost vmunix: [ 0.648420] thermal_sys: Registered thermal governor 'bang_bang'
Apr 19 20:04:44 localhost vmunix: [ 0.648423] thermal_sys: Registered thermal governor 'step_wise'
Apr 19 20:04:44 localhost vmunix: [ 0.648426] thermal_sys: Registered thermal governor 'user_space'
Apr 19 20:04:44 localhost vmunix: [ 0.648428] thermal_sys: Registered thermal governor 'power_allocator'
Apr 19 20:04:44 localhost vmunix: [ 0.682993] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Apr 19 20:04:44 localhost vmunix: [ 0.683155] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
Apr 19 20:04:44 localhost vmunix: [ 0.683165] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
Apr 19 20:04:44 localhost vmunix: [ 0.683173] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
Apr 19 20:04:44 localhost vmunix: [ 0.683181] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
Apr 19 20:04:44 localhost vmunix: [ 0.683191] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
Apr 19 20:04:44 localhost vmunix: [ 0.683221] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
Apr 19 20:04:44 localhost vmunix: [ 0.683238] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.683252] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.683263] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Apr 19 20:04:44 localhost vmunix: [ 0.683272] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
Apr 19 20:04:44 localhost vmunix: [ 0.683280] pci 0000:00:1c.0: PCI bridge to [bus 04]
Apr 19 20:04:44 localhost vmunix: [ 0.683288] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Apr 19 20:04:44 localhost vmunix: [ 0.683299] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
Apr 19 20:04:44 localhost vmunix: [ 0.683307] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.683319] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
Apr 19 20:04:44 localhost vmunix: [ 0.683325] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
Apr 19 20:04:44 localhost vmunix: [ 0.683334] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
Apr 19 20:04:44 localhost vmunix: [ 0.683343] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.683353] pci 0000:00:1c.3: PCI bridge to [bus 01]
Apr 19 20:04:44 localhost vmunix: [ 0.683359] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
Apr 19 20:04:44 localhost vmunix: [ 0.683369] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
Apr 19 20:04:44 localhost vmunix: [ 0.683377] pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.683389] pci 0000:00:1e.0: PCI bridge to [bus 05]
Apr 19 20:04:44 localhost vmunix: [ 0.683409] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
Apr 19 20:04:44 localhost vmunix: [ 0.683415] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
Apr 19 20:04:44 localhost vmunix: [ 0.683420] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Apr 19 20:04:44 localhost vmunix: [ 0.683425] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
Apr 19 20:04:44 localhost vmunix: [ 0.683431] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff window]
Apr 19 20:04:44 localhost vmunix: [ 0.683436] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
Apr 19 20:04:44 localhost vmunix: [ 0.683441] pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
Apr 19 20:04:44 localhost vmunix: [ 0.683447] pci_bus 0000:04: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.683452] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
Apr 19 20:04:44 localhost vmunix: [ 0.683457] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
Apr 19 20:04:44 localhost vmunix: [ 0.683463] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.683468] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
Apr 19 20:04:44 localhost vmunix: [ 0.683473] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
Apr 19 20:04:44 localhost vmunix: [ 0.683479] pci_bus 0000:01: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
Apr 19 20:04:44 localhost vmunix: [ 0.683485] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
Apr 19 20:04:44 localhost vmunix: [ 0.683490] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
Apr 19 20:04:44 localhost vmunix: [ 0.683495] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
Apr 19 20:04:44 localhost vmunix: [ 0.683501] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
Apr 19 20:04:44 localhost vmunix: [ 0.683506] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff window]
Apr 19 20:04:44 localhost vmunix: [ 0.683797] NET: Registered protocol family 2
Apr 19 20:04:44 localhost vmunix: [ 0.684339] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
Apr 19 20:04:44 localhost vmunix: [ 0.684370] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
Apr 19 20:04:44 localhost vmunix: [ 0.684437] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
Apr 19 20:04:44 localhost vmunix: [ 0.684491] TCP: Hash tables configured (established 8192 bind 8192)
Apr 19 20:04:44 localhost vmunix: [ 0.684586] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Apr 19 20:04:44 localhost vmunix: [ 0.684610] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Apr 19 20:04:44 localhost vmunix: [ 0.684757] NET: Registered protocol family 1
Apr 19 20:04:44 localhost vmunix: [ 0.684801] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Apr 19 20:04:44 localhost vmunix: [ 0.686477] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
Apr 19 20:04:44 localhost vmunix: [ 0.686487] PCI: CLS 32 bytes, default 64
Apr 19 20:04:44 localhost vmunix: [ 0.686734] Trying to unpack rootfs image as initramfs...
Apr 19 20:04:44 localhost vmunix: [ 1.360889] Freeing initrd memory: 10076K
Apr 19 20:04:44 localhost vmunix: [ 1.360956] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Apr 19 20:04:44 localhost vmunix: [ 1.360961] software IO TLB: mapped [mem 0x31000000-0x35000000] (64MB)
Apr 19 20:04:44 localhost vmunix: [ 1.361378] check: Scanning for low memory corruption every 60 seconds
Apr 19 20:04:44 localhost vmunix: [ 1.362715] Initialise system trusted keyrings
Apr 19 20:04:44 localhost vmunix: [ 1.362871] workingset: timestamp_bits=14 max_order=19 bucket_order=5
Apr 19 20:04:44 localhost vmunix: [ 1.368347] zbud: loaded
Apr 19 20:04:44 localhost vmunix: [ 1.370507] Allocating IMA blacklist keyring.
Apr 19 20:04:44 localhost vmunix: [ 1.384941] Key type asymmetric registered
Apr 19 20:04:44 localhost vmunix: [ 1.384945] Asymmetric key parser 'x509' registered
Apr 19 20:04:44 localhost vmunix: [ 1.385085] bounce: pool size: 64 pages
Apr 19 20:04:44 localhost vmunix: [ 1.385151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Apr 19 20:04:44 localhost vmunix: [ 1.385352] io scheduler mq-deadline registered
Apr 19 20:04:44 localhost vmunix: [ 1.385901] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
Apr 19 20:04:44 localhost vmunix: [ 1.386415] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
Apr 19 20:04:44 localhost vmunix: [ 1.387342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Apr 19 20:04:44 localhost vmunix: [ 1.387478] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
Apr 19 20:04:44 localhost vmunix: [ 1.387654] clocksource: Switched to clocksource hpet
Apr 19 20:04:44 localhost vmunix: [ 1.388198] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
Apr 19 20:04:44 localhost vmunix: [ 1.388270] ACPI: Lid Switch [LID]
Apr 19 20:04:44 localhost vmunix: [ 1.388402] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Apr 19 20:04:44 localhost vmunix: [ 1.388469] ACPI: Sleep Button [SLPB]
Apr 19 20:04:44 localhost vmunix: [ 1.388590] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
Apr 19 20:04:44 localhost vmunix: [ 1.388661] ACPI: Power Button [PWRB]
Apr 19 20:04:44 localhost vmunix: [ 1.388786] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Apr 19 20:04:44 localhost vmunix: [ 1.388921] ACPI: Power Button [PWRF]
Apr 19 20:04:44 localhost vmunix: [ 1.407307] thermal LNXTHERM:00: registered as thermal_zone0
Apr 19 20:04:44 localhost vmunix: [ 1.407311] ACPI: Thermal Zone [TZ00] (50 C)
Apr 19 20:04:44 localhost vmunix: [ 1.407456] isapnp: Scanning for PnP cards...
Apr 19 20:04:44 localhost vmunix: [ 1.761231] isapnp: No Plug & Play device found
Apr 19 20:04:44 localhost vmunix: [ 1.761544] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
Apr 19 20:04:44 localhost vmunix: [ 1.769606] Linux agpgart interface v0.103
Apr 19 20:04:44 localhost vmunix: [ 1.779637] brd: module loaded
Apr 19 20:04:44 localhost vmunix: [ 1.786497] loop: module loaded
Apr 19 20:04:44 localhost vmunix: [ 1.787893] libphy: Fixed MDIO Bus: probed
Apr 19 20:04:44 localhost vmunix: [ 1.787898] tun: Universal TUN/TAP device driver, 1.6
Apr 19 20:04:44 localhost vmunix: [ 1.788059] PPP generic driver version 2.4.2
Apr 19 20:04:44 localhost vmunix: [ 1.788224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Apr 19 20:04:44 localhost vmunix: [ 1.788239] ehci-pci: EHCI PCI platform driver
Apr 19 20:04:44 localhost vmunix: [ 1.788571] ehci-pci 0000:00:1d.7: EHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.788590] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
Apr 19 20:04:44 localhost vmunix: [ 1.788613] ehci-pci 0000:00:1d.7: debug port 1
Apr 19 20:04:44 localhost vmunix: [ 1.792542] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
Apr 19 20:04:44 localhost vmunix: [ 1.792580] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
Apr 19 20:04:44 localhost vmunix: [ 1.806741] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Apr 19 20:04:44 localhost vmunix: [ 1.806948] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
Apr 19 20:04:44 localhost vmunix: [ 1.806954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 19 20:04:44 localhost vmunix: [ 1.806959] usb usb1: Product: EHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.806963] usb usb1: Manufacturer: Linux 5.4.31-gnu ehci_hcd
Apr 19 20:04:44 localhost vmunix: [ 1.806968] usb usb1: SerialNumber: 0000:00:1d.7
Apr 19 20:04:44 localhost vmunix: [ 1.807439] hub 1-0:1.0: USB hub found
Apr 19 20:04:44 localhost vmunix: [ 1.807467] hub 1-0:1.0: 8 ports detected
Apr 19 20:04:44 localhost vmunix: [ 1.808578] ehci-platform: EHCI generic platform driver
Apr 19 20:04:44 localhost vmunix: [ 1.808633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Apr 19 20:04:44 localhost vmunix: [ 1.808651] ohci-pci: OHCI PCI platform driver
Apr 19 20:04:44 localhost vmunix: [ 1.808690] ohci-platform: OHCI generic platform driver
Apr 19 20:04:44 localhost vmunix: [ 1.808715] uhci_hcd: USB Universal Host Controller Interface driver
Apr 19 20:04:44 localhost vmunix: [ 1.808977] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.808996] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Apr 19 20:04:44 localhost vmunix: [ 1.809013] uhci_hcd 0000:00:1d.0: detected 2 ports
Apr 19 20:04:44 localhost vmunix: [ 1.809065] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
Apr 19 20:04:44 localhost vmunix: [ 1.809276] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
Apr 19 20:04:44 localhost vmunix: [ 1.809282] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 19 20:04:44 localhost vmunix: [ 1.809287] usb usb2: Product: UHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.809291] usb usb2: Manufacturer: Linux 5.4.31-gnu uhci_hcd
Apr 19 20:04:44 localhost vmunix: [ 1.809296] usb usb2: SerialNumber: 0000:00:1d.0
Apr 19 20:04:44 localhost vmunix: [ 1.809747] hub 2-0:1.0: USB hub found
Apr 19 20:04:44 localhost vmunix: [ 1.809775] hub 2-0:1.0: 2 ports detected
Apr 19 20:04:44 localhost vmunix: [ 1.810467] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.810486] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
Apr 19 20:04:44 localhost vmunix: [ 1.810500] uhci_hcd 0000:00:1d.1: detected 2 ports
Apr 19 20:04:44 localhost vmunix: [ 1.810578] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
Apr 19 20:04:44 localhost vmunix: [ 1.810855] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
Apr 19 20:04:44 localhost vmunix: [ 1.810861] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 19 20:04:44 localhost vmunix: [ 1.810865] usb usb3: Product: UHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.810870] usb usb3: Manufacturer: Linux 5.4.31-gnu uhci_hcd
Apr 19 20:04:44 localhost vmunix: [ 1.810874] usb usb3: SerialNumber: 0000:00:1d.1
Apr 19 20:04:44 localhost vmunix: [ 1.811318] hub 3-0:1.0: USB hub found
Apr 19 20:04:44 localhost vmunix: [ 1.811346] hub 3-0:1.0: 2 ports detected
Apr 19 20:04:44 localhost vmunix: [ 1.812087] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.812105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
Apr 19 20:04:44 localhost vmunix: [ 1.812119] uhci_hcd 0000:00:1d.2: detected 2 ports
Apr 19 20:04:44 localhost vmunix: [ 1.812195] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
Apr 19 20:04:44 localhost vmunix: [ 1.812402] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
Apr 19 20:04:44 localhost vmunix: [ 1.812408] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 19 20:04:44 localhost vmunix: [ 1.812412] usb usb4: Product: UHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.812417] usb usb4: Manufacturer: Linux 5.4.31-gnu uhci_hcd
Apr 19 20:04:44 localhost vmunix: [ 1.812421] usb usb4: SerialNumber: 0000:00:1d.2
Apr 19 20:04:44 localhost vmunix: [ 1.812851] hub 4-0:1.0: USB hub found
Apr 19 20:04:44 localhost vmunix: [ 1.812879] hub 4-0:1.0: 2 ports detected
Apr 19 20:04:44 localhost vmunix: [ 1.813576] uhci_hcd 0000:00:1d.3: UHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.813594] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
Apr 19 20:04:44 localhost vmunix: [ 1.813609] uhci_hcd 0000:00:1d.3: detected 2 ports
Apr 19 20:04:44 localhost vmunix: [ 1.813678] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
Apr 19 20:04:44 localhost vmunix: [ 1.813882] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
Apr 19 20:04:44 localhost vmunix: [ 1.813888] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 19 20:04:44 localhost vmunix: [ 1.813892] usb usb5: Product: UHCI Host Controller
Apr 19 20:04:44 localhost vmunix: [ 1.813897] usb usb5: Manufacturer: Linux 5.4.31-gnu uhci_hcd
Apr 19 20:04:44 localhost vmunix: [ 1.813901] usb usb5: SerialNumber: 0000:00:1d.3
Apr 19 20:04:44 localhost vmunix: [ 1.814334] hub 5-0:1.0: USB hub found
Apr 19 20:04:44 localhost vmunix: [ 1.814362] hub 5-0:1.0: 2 ports detected
Apr 19 20:04:44 localhost vmunix: [ 1.815148] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Apr 19 20:04:44 localhost vmunix: [ 1.833534] serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 19 20:04:44 localhost vmunix: [ 1.833551] serio: i8042 AUX port at 0x60,0x64 irq 12
Apr 19 20:04:44 localhost vmunix: [ 1.834069] mousedev: PS/2 mouse device common for all mice
Apr 19 20:04:44 localhost vmunix: [ 1.834884] rtc_cmos 00:01: RTC can wake from S4
Apr 19 20:04:44 localhost vmunix: [ 1.835354] rtc_cmos 00:01: registered as rtc0
Apr 19 20:04:44 localhost vmunix: [ 1.835421] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Apr 19 20:04:44 localhost vmunix: [ 1.835452] i2c /dev entries driver
Apr 19 20:04:44 localhost vmunix: [ 1.835601] device-mapper: uevent: version 1.0.3
Apr 19 20:04:44 localhost vmunix: [ 1.835865] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
Apr 19 20:04:44 localhost vmunix: [ 1.835945] platform eisa.0: Probing EISA bus 0
Apr 19 20:04:44 localhost vmunix: [ 1.835952] platform eisa.0: EISA: Cannot allocate resource for mainboard
Apr 19 20:04:44 localhost vmunix: [ 1.835957] platform eisa.0: Cannot allocate resource for EISA slot 1
Apr 19 20:04:44 localhost vmunix: [ 1.835962] platform eisa.0: Cannot allocate resource for EISA slot 2
Apr 19 20:04:44 localhost vmunix: [ 1.835966] platform eisa.0: Cannot allocate resource for EISA slot 3
Apr 19 20:04:44 localhost vmunix: [ 1.835971] platform eisa.0: Cannot allocate resource for EISA slot 4
Apr 19 20:04:44 localhost vmunix: [ 1.835975] platform eisa.0: Cannot allocate resource for EISA slot 5
Apr 19 20:04:44 localhost vmunix: [ 1.835980] platform eisa.0: Cannot allocate resource for EISA slot 6
Apr 19 20:04:44 localhost vmunix: [ 1.835985] platform eisa.0: Cannot allocate resource for EISA slot 7
Apr 19 20:04:44 localhost vmunix: [ 1.835989] platform eisa.0: Cannot allocate resource for EISA slot 8
Apr 19 20:04:44 localhost vmunix: [ 1.835994] platform eisa.0: EISA: Detected 0 cards
Apr 19 20:04:44 localhost vmunix: [ 1.836009] cpufreq_nforce2: No nForce2 chipset
Apr 19 20:04:44 localhost vmunix: [ 1.836012] intel_pstate: CPU model not supported
Apr 19 20:04:44 localhost vmunix: [ 1.836079] ledtrig-cpu: registered to indicate activity on CPUs
Apr 19 20:04:44 localhost vmunix: [ 1.836903] NET: Registered protocol family 10
Apr 19 20:04:44 localhost vmunix: [ 1.837629] Segment Routing with IPv6
Apr 19 20:04:44 localhost vmunix: [ 1.837682] NET: Registered protocol family 17
Apr 19 20:04:44 localhost vmunix: [ 1.837828] Key type dns_resolver registered
Apr 19 20:04:44 localhost vmunix: [ 1.838439] microcode: sig=0x106ca, pf=0x4, revision=0x105
Apr 19 20:04:44 localhost vmunix: [ 1.838666] microcode: Microcode Update Driver: v2.2.
Apr 19 20:04:44 localhost vmunix: [ 1.838679] IPI shorthand broadcast: enabled
Apr 19 20:04:44 localhost vmunix: [ 1.838934] registered taskstats version 1
Apr 19 20:04:44 localhost vmunix: [ 1.838945] Loading compiled-in X.509 certificates
Apr 19 20:04:44 localhost vmunix: [ 1.839034] zswap: loaded using pool lzo/zbud
Apr 19 20:04:44 localhost vmunix: [ 1.840932] Key type big_key registered
Apr 19 20:04:44 localhost vmunix: [ 1.841602] Key type encrypted registered
Apr 19 20:04:44 localhost vmunix: [ 1.841614] AppArmor: AppArmor sha1 policy hashing enabled
Apr 19 20:04:44 localhost vmunix: [ 1.841634] ima: No TPM chip found, activating TPM-bypass!
Apr 19 20:04:44 localhost vmunix: [ 1.841650] ima: Allocated hash algorithm: sha1
Apr 19 20:04:44 localhost vmunix: [ 1.841668] ima: No architecture policies found
Apr 19 20:04:44 localhost vmunix: [ 1.841698] evm: Initialising EVM extended attributes:
Apr 19 20:04:44 localhost vmunix: [ 1.841701] evm: security.selinux
Apr 19 20:04:44 localhost vmunix: [ 1.841703] evm: security.SMACK64
Apr 19 20:04:44 localhost vmunix: [ 1.841704] evm: security.SMACK64EXEC
Apr 19 20:04:44 localhost vmunix: [ 1.841706] evm: security.SMACK64TRANSMUTE
Apr 19 20:04:44 localhost vmunix: [ 1.841708] evm: security.SMACK64MMAP
Apr 19 20:04:44 localhost vmunix: [ 1.841710] evm: security.apparmor
Apr 19 20:04:44 localhost vmunix: [ 1.841711] evm: security.ima
Apr 19 20:04:44 localhost vmunix: [ 1.841713] evm: security.capability
Apr 19 20:04:44 localhost vmunix: [ 1.841716] evm: HMAC attrs: 0x1
Apr 19 20:04:44 localhost vmunix: [ 1.842463] PM: Magic number: 0:837:89
Apr 19 20:04:44 localhost vmunix: [ 1.842711] rtc_cmos 00:01: setting system clock to 2020-04-19T18:04:20 UTC (1587319460)
Apr 19 20:04:44 localhost vmunix: [ 1.844046] Unstable clock detected, switching default tracing clock to "global"
Apr 19 20:04:44 localhost vmunix: [ 1.844046] If you want to keep using the local clock, then add:
Apr 19 20:04:44 localhost vmunix: [ 1.844046] "trace_clock=local"
Apr 19 20:04:44 localhost vmunix: [ 1.844046] on the kernel command line
Apr 19 20:04:44 localhost vmunix: [ 1.849158] Freeing unused kernel image memory: 1212K
Apr 19 20:04:44 localhost vmunix: [ 1.854593] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
Apr 19 20:04:44 localhost vmunix: [ 1.865713] Write protecting kernel text and read-only data: 13380k
Apr 19 20:04:44 localhost vmunix: [ 1.865717] NX-protecting the kernel data: 6728k
Apr 19 20:04:44 localhost vmunix: [ 1.865995] Run /init as init process
Apr 19 20:04:44 localhost vmunix: [ 2.142721] usb 1-1: new high-speed USB device number 2 using ehci-pci
Apr 19 20:04:44 localhost vmunix: [ 2.152027] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
Apr 19 20:04:44 localhost vmunix: [ 2.152036] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
Apr 19 20:04:44 localhost vmunix: [ 2.153733] scsi host0: ahci
Apr 19 20:04:44 localhost vmunix: [ 2.154272] scsi host1: ahci
Apr 19 20:04:44 localhost vmunix: [ 2.154770] scsi host2: ahci
Apr 19 20:04:44 localhost vmunix: [ 2.155220] scsi host3: ahci
Apr 19 20:04:44 localhost vmunix: [ 2.155432] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 27
Apr 19 20:04:44 localhost vmunix: [ 2.155436] ata2: DUMMY
Apr 19 20:04:44 localhost vmunix: [ 2.155439] ata3: DUMMY
Apr 19 20:04:44 localhost vmunix: [ 2.155441] ata4: DUMMY
Apr 19 20:04:44 localhost vmunix: [ 2.176160] usb 1-1: New USB device found, idVendor=0781, idProduct=5575, bcdDevice= 1.00
Apr 19 20:04:44 localhost vmunix: [ 2.176167] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 19 20:04:44 localhost vmunix: [ 2.176172] usb 1-1: Product: Cruzer Glide
Apr 19 20:04:44 localhost vmunix: [ 2.176176] usb 1-1: Manufacturer: SanDisk
Apr 19 20:04:44 localhost vmunix: [ 2.176180] usb 1-1: SerialNumber: 4C530001150503111030
Apr 19 20:04:44 localhost vmunix: [ 2.470804] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Apr 19 20:04:44 localhost vmunix: [ 2.471953] ata1.00: unexpected _GTF length (8)
Apr 19 20:04:44 localhost vmunix: [ 2.506685] usb 3-2: new full-speed USB device number 2 using uhci_hcd
Apr 19 20:04:44 localhost vmunix: [ 2.634658] random: fast init done
Apr 19 20:04:44 localhost vmunix: [ 2.696782] usb 3-2: New USB device found, idVendor=0486, idProduct=0186, bcdDevice= 2.30
Apr 19 20:04:44 localhost vmunix: [ 2.696788] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Apr 19 20:04:44 localhost vmunix: [ 2.696793] usb 3-2: Product: MultiTouch(TTI)
Apr 19 20:04:44 localhost vmunix: [ 2.696797] usb 3-2: Manufacturer: AsusTek, Inc.
Apr 19 20:04:44 localhost vmunix: [ 2.771715] ata1.00: ATA-8: ST9250315AS, 0003SDM1, max UDMA/133
Apr 19 20:04:44 localhost vmunix: [ 2.771722] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32)
Apr 19 20:04:44 localhost vmunix: [ 2.773975] ata1.00: unexpected _GTF length (8)
Apr 19 20:04:44 localhost vmunix: [ 2.774334] ata1.00: configured for UDMA/133
Apr 19 20:04:44 localhost vmunix: [ 2.774764] scsi 0:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5
Apr 19 20:04:44 localhost vmunix: [ 2.775470] sd 0:0:0:0: Attached scsi generic sg0 type 0
Apr 19 20:04:44 localhost vmunix: [ 2.775883] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
Apr 19 20:04:44 localhost vmunix: [ 2.775929] sd 0:0:0:0: [sda] Write Protect is off
Apr 19 20:04:44 localhost vmunix: [ 2.776012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Apr 19 20:04:44 localhost vmunix: [ 2.850098] sda: sda1 sda2 sda3
Apr 19 20:04:44 localhost vmunix: [ 2.851653] sd 0:0:0:0: [sda] Attached SCSI disk
Apr 19 20:04:44 localhost vmunix: [ 2.859090] usb-storage 1-1:1.0: USB Mass Storage device detected
Apr 19 20:04:44 localhost vmunix: [ 2.859518] scsi host4: usb-storage 1-1:1.0
Apr 19 20:04:44 localhost vmunix: [ 2.859810] usbcore: registered new interface driver usb-storage
Apr 19 20:04:44 localhost vmunix: [ 2.867895] usbcore: registered new interface driver uas
Apr 19 20:04:44 localhost vmunix: [ 2.873713] hidraw: raw HID events driver (C) Jiri Kosina
Apr 19 20:04:44 localhost vmunix: [ 2.886184] usbcore: registered new interface driver usbhid
Apr 19 20:04:44 localhost vmunix: [ 2.886187] usbhid: USB HID core driver
Apr 19 20:04:44 localhost vmunix: [ 2.918413] input: AsusTek, Inc. MultiTouch(TTI) Touchscreen as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:0486:0186.0001/input/input6
Apr 19 20:04:44 localhost vmunix: [ 2.918902] input: AsusTek, Inc. MultiTouch(TTI) Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:0486:0186.0001/input/input7
Apr 19 20:04:44 localhost vmunix: [ 2.919262] input: AsusTek, Inc. MultiTouch(TTI) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:0486:0186.0001/input/input8
Apr 19 20:04:44 localhost vmunix: [ 2.919654] hid-generic 0003:0486:0186.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [AsusTek, Inc. MultiTouch(TTI)] on usb-0000:00:1d.1-2/input0
Apr 19 20:04:44 localhost vmunix: [ 2.975578] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
Apr 19 20:04:44 localhost vmunix: [ 3.206746] usb 1-6: new high-speed USB device number 4 using ehci-pci
Apr 19 20:04:44 localhost vmunix: [ 3.238878] usb 1-6: New USB device found, idVendor=13d3, idProduct=5126, bcdDevice=12.09
Apr 19 20:04:44 localhost vmunix: [ 3.238884] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=2
Apr 19 20:04:44 localhost vmunix: [ 3.238888] usb 1-6: Product: USB 2.0 PC Cam
Apr 19 20:04:44 localhost vmunix: [ 3.238893] usb 1-6: Manufacturer: Image Processor
Apr 19 20:04:44 localhost vmunix: [ 3.238897] usb 1-6: SerialNumber: USB 2.0 PC Cam
Apr 19 20:04:44 localhost vmunix: [ 3.867543] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Glide 1.00 PQ: 0 ANSI: 6
Apr 19 20:04:44 localhost vmunix: [ 3.868277] sd 4:0:0:0: Attached scsi generic sg1 type 0
Apr 19 20:04:44 localhost vmunix: [ 3.868869] sd 4:0:0:0: [sdb] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB)
Apr 19 20:04:44 localhost vmunix: [ 3.870612] sd 4:0:0:0: [sdb] Write Protect is off
Apr 19 20:04:44 localhost vmunix: [ 3.871737] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Apr 19 20:04:44 localhost vmunix: [ 3.896904] sdb: sdb1 sdb2
Apr 19 20:04:44 localhost vmunix: [ 3.900883] sd 4:0:0:0: [sdb] Attached SCSI removable disk
Apr 19 20:04:44 localhost vmunix: [ 4.693087] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
Apr 19 20:04:44 localhost vmunix: [ 4.693159] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
Apr 19 20:04:44 localhost vmunix: [ 6.818661] random: crng init done
Apr 19 20:04:44 localhost vmunix: [ 21.334346] shepherd[1]: Service root has been started.
Apr 19 20:04:44 localhost vmunix: [ 22.017247] shepherd[1]: starting services...
Apr 19 20:04:44 localhost vmunix: [ 22.020534] shepherd[1]: Service root-file-system has been started.
Apr 19 20:04:44 localhost vmunix: [ 22.023485] shepherd[1]: Service user-file-systems has been started.
Apr 19 20:04:44 localhost vmunix: [ 22.048510] shepherd[1]: waiting for udevd...
Apr 19 20:04:44 localhost vmunix: [ 22.159119] udevd[184]: starting version 3.2.9
Apr 19 20:04:44 localhost vmunix: [ 22.247744] udevd[184]: starting eudev-3.2.9
Apr 19 20:04:44 localhost vmunix: [ 22.550071] udevd[184]: no sender credentials received, message ignored
Apr 19 20:04:44 localhost vmunix: [ 22.879207] ACPI: AC Adapter [AC0] (on-line)
Apr 19 20:04:44 localhost vmunix: [ 23.044477] battery: ACPI: Battery Slot [BAT0] (battery present)
Apr 19 20:04:44 localhost vmunix: [ 23.094470] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIO) (20190816/utaddress-213)
Apr 19 20:04:44 localhost vmunix: [ 23.094494] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082F (\_SB.PCI0.SBRG.IELK.GPSE) (20190816/utaddress-213)
Apr 19 20:04:44 localhost vmunix: [ 23.094510] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Apr 19 20:04:44 localhost vmunix: [ 23.094519] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20190816/utaddress-213)
Apr 19 20:04:44 localhost vmunix: [ 23.094534] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Apr 19 20:04:44 localhost vmunix: [ 23.094539] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20190816/utaddress-213)
Apr 19 20:04:44 localhost vmunix: [ 23.094553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Apr 19 20:04:44 localhost vmunix: [ 23.094556] lpc_ich: Resource conflict(s) found affecting gpio_ich
Apr 19 20:04:44 localhost vmunix: [ 23.095678] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
Apr 19 20:04:44 localhost vmunix: [ 23.169369] mc: Linux media interface: v0.10
Apr 19 20:04:44 localhost vmunix: [ 23.266759] videodev: Linux video capture interface: v2.00
Apr 19 20:04:44 localhost vmunix: [ 23.385734] input: PC Speaker as /devices/platform/pcspkr/input/input9
Apr 19 20:04:44 localhost vmunix: [ 23.481209] intel_powerclamp: No package C-state available
Apr 19 20:04:44 localhost vmunix: [ 23.505902] input: AsusTek, Inc. MultiTouch(TTI) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:0486:0186.0001/input/input11
Apr 19 20:04:44 localhost vmunix: [ 23.507256] hid-multitouch 0003:0486:0186.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [AsusTek, Inc. MultiTouch(TTI)] on usb-0000:00:1d.1-2/input0
Apr 19 20:04:44 localhost vmunix: [ 23.516921] intel_powerclamp: No package C-state available
Apr 19 20:04:44 localhost vmunix: [ 23.608655] Error: Driver 'pcspkr' is already registered, aborting...
Apr 19 20:04:44 localhost vmunix: [ 23.661268] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (13d3:5126)
Apr 19 20:04:44 localhost vmunix: [ 23.679580] uvcvideo 1-6:1.0: Entity type for entity Processing 3 was not initialized!
Apr 19 20:04:44 localhost vmunix: [ 23.679593] uvcvideo 1-6:1.0: Entity type for entity Extension 2 was not initialized!
Apr 19 20:04:44 localhost vmunix: [ 23.679602] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
Apr 19 20:04:44 localhost vmunix: [ 23.680083] input: USB 2.0 PC Cam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input14
Apr 19 20:04:44 localhost vmunix: [ 23.680526] usbcore: registered new interface driver uvcvideo
Apr 19 20:04:44 localhost vmunix: [ 23.680531] USB Video Class driver (1.1.1)
Apr 19 20:04:44 localhost vmunix: [ 23.767052] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Apr 19 20:04:44 localhost vmunix: [ 24.009138] iTCO_vendor_support: vendor-support=0
Apr 19 20:04:44 localhost vmunix: [ 24.066458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
Apr 19 20:04:44 localhost vmunix: [ 24.066607] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
Apr 19 20:04:44 localhost vmunix: [ 24.067120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Apr 19 20:04:44 localhost vmunix: [ 24.076721] asus_wmi: ASUS WMI generic driver loaded
Apr 19 20:04:44 localhost vmunix: [ 24.084628] atl1c 0000:01:00.0 enp1s0: renamed from eth0
Apr 19 20:04:44 localhost vmunix: [ 24.099865] eeepc_wmi: Found legacy ATKD device (ASUS010)
Apr 19 20:04:44 localhost vmunix: [ 24.099870] eeepc_wmi: WMI device present, but legacy ATKD device is also present and enabled
Apr 19 20:04:44 localhost vmunix: [ 24.099873] eeepc_wmi: You probably booted with acpi_osi="Linux" or acpi_osi="!Windows 2009"
Apr 19 20:04:44 localhost vmunix: [ 24.099876] eeepc_wmi: Can't load eeepc-wmi, use default acpi_osi (preferred) or eeepc-laptop
Apr 19 20:04:44 localhost vmunix: [ 24.099891] eeepc-wmi: probe of eeepc-wmi failed with error -16
Apr 19 20:04:44 localhost vmunix: [ 24.151565] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Apr 19 20:04:44 localhost vmunix: [ 24.151836] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Apr 19 20:04:44 localhost vmunix: [ 24.151842] cfg80211: failed to load regulatory.db
Apr 19 20:04:44 localhost vmunix: [ 24.162312] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
Apr 19 20:04:44 localhost vmunix: [ 24.162322] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Apr 19 20:04:44 localhost vmunix: [ 24.162330] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
Apr 19 20:04:44 localhost vmunix: [ 24.162335] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
Apr 19 20:04:44 localhost vmunix: [ 24.162341] snd_hda_codec_realtek hdaudioC0D0: inputs:
Apr 19 20:04:44 localhost vmunix: [ 24.162349] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
Apr 19 20:04:44 localhost vmunix: [ 24.162356] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
Apr 19 20:04:44 localhost vmunix: [ 24.179312] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
Apr 19 20:04:44 localhost vmunix: [ 24.179806] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
Apr 19 20:04:44 localhost vmunix: [ 24.254734] pci 0000:00:00.0: Intel GMA3150 Chipset
Apr 19 20:04:44 localhost vmunix: [ 24.254797] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
Apr 19 20:04:44 localhost vmunix: [ 24.254890] pci 0000:00:00.0: detected 8192K stolen memory
Apr 19 20:04:44 localhost vmunix: [ 24.254993] i915 0000:00:02.0: vgaarb: deactivate vga console
Apr 19 20:04:44 localhost vmunix: [ 24.256410] Console: switching to colour dummy device 80x25
Apr 19 20:04:44 localhost vmunix: [ 24.259692] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Apr 19 20:04:44 localhost vmunix: [ 24.259695] [drm] Driver supports precise vblank timestamp query.
Apr 19 20:04:44 localhost vmunix: [ 24.265283] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
Apr 19 20:04:44 localhost vmunix: [ 24.304315] [drm] RC6 disabled, disabling runtime PM support
Apr 19 20:04:44 localhost vmunix: [ 24.304532] [drm] Initialized overlay support.
Apr 19 20:04:44 localhost vmunix: [ 24.305933] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
Apr 19 20:04:44 localhost vmunix: [ 24.306747] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
Apr 19 20:04:44 localhost vmunix: [ 24.321327] acpi device:2b: registered as cooling_device2
Apr 19 20:04:44 localhost vmunix: [ 24.321668] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
Apr 19 20:04:44 localhost vmunix: [ 24.344726] fbcon: i915drmfb (fb0) is primary device
Apr 19 20:04:44 localhost vmunix: [ 24.421762] ath: phy0: ASPM enabled: 0x42
Apr 19 20:04:44 localhost vmunix: [ 24.428058] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf7ea0000, irq=17
Apr 19 20:04:44 localhost vmunix: [ 24.439857] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
Apr 19 20:04:44 localhost vmunix: [ 24.477786] psmouse serio1: synaptics: queried max coordinates: x [..5624], y [..4754]
Apr 19 20:04:44 localhost vmunix: [ 24.589241] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 600854
Apr 19 20:04:44 localhost vmunix: [ 24.659326] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
Apr 19 20:04:44 localhost vmunix: [ 25.098276] Console: switching to colour frame buffer device 128x37
Apr 19 20:04:44 localhost vmunix: [ 25.123926] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
Apr 19 20:04:44 localhost vmunix: [ 25.167847] shepherd[1]: Service udev has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.172139] shepherd[1]: Service file-system-/tmp has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.176356] shepherd[1]: Service file-system-/dev/pts has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.180899] shepherd[1]: Service file-system-/dev/shm has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.185219] shepherd[1]: Service file-system-/gnu/store has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.188154] shepherd[1]: Service file-systems has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.191223] shepherd[1]: Service user-processes has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.194183] shepherd[1]: Service host-name has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.226427] shepherd[1]: Service user-homes has been started.
Apr 19 20:04:44 localhost vmunix: [ 25.229359] shepherd[1]: Service uvesafb has been started.
Apr 19 20:04:44 localhost shepherd[1]: Service dbus-system has been started.
Apr 19 20:04:44 localhost shepherd[1]: Service loopback has been started.
Apr 19 20:04:45 localhost wpa_supplicant[217]: Successfully initialized wpa_supplicant
Apr 19 20:04:45 localhost shepherd[1]: Service wpa-supplicant has been started.
Apr 19 20:04:45 localhost shepherd[1]: Service networking has been started.
Apr 19 20:04:45 localhost nscd: 220 monitoring file `/etc/hosts` (1)
Apr 19 20:04:45 localhost nscd: 220 monitoring directory `/etc` (2)
Apr 19 20:04:45 localhost nscd: 220 monitoring file `/etc/resolv.conf` (3)
Apr 19 20:04:45 localhost nscd: 220 monitoring directory `/etc` (2)
Apr 19 20:04:45 localhost connmand[219]: Connection Manager version 1.38
Apr 19 20:04:45 localhost connmand[219]: Excluding VPN plugin
Apr 19 20:04:45 localhost connmand[219]: Checking loopback interface settings
Apr 19 20:04:45 localhost connmand[219]: System hostname is gnu
Apr 19 20:04:45 localhost connmand[219]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
Apr 19 20:04:45 localhost connmand[219]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {create} index 2 type 1 <ETHER>
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {update} flags 4098 <DOWN>
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {newlink} index 2 address BC:AE:C5:32:CC:E2 mtu 1500
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {newlink} index 2 operstate 2 <DOWN>
Apr 19 20:04:45 localhost connmand[219]: Adding interface enp1s0 [ ethernet ]
Apr 19 20:04:45 localhost connmand[219]: wlp2s0 {create} index 3 type 1 <ETHER>
Apr 19 20:04:45 localhost connmand[219]: wlp2s0 {update} flags 4098 <DOWN>
Apr 19 20:04:45 localhost connmand[219]: wlp2s0 {newlink} index 3 address 48:5D:60:7F:9D:BF mtu 1500
Apr 19 20:04:45 localhost connmand[219]: wlp2s0 {newlink} index 3 operstate 2 <DOWN>
Apr 19 20:04:45 localhost connmand[219]: Adding interface wlp2s0 [ wifi ]
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {update} flags 36931 <UP,RUNNING>
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {newlink} index 2 address BC:AE:C5:32:CC:E2 mtu 1500
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {newlink} index 2 operstate 0 <UNKNOWN>
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {update} flags 36867 <UP>
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {newlink} index 2 address BC:AE:C5:32:CC:E2 mtu 1500
Apr 19 20:04:45 localhost connmand[219]: enp1s0 {newlink} index 2 operstate 2 <DOWN>
Apr 19 20:04:46 localhost shepherd[1]: Service nscd has been started.
Apr 19 20:04:46 localhost /gnu/store/y1f15zmccdz0n1y3wv43b51n5b3rbfq6-gpm-1.20.7/sbin/gpm[228]: *** info [daemon/startup.c(136)]:
Apr 19 20:04:46 localhost /gnu/store/y1f15zmccdz0n1y3wv43b51n5b3rbfq6-gpm-1.20.7/sbin/gpm[228]: Started gpm successfully. Entered daemon mode.
Apr 19 20:04:46 localhost shepherd[1]: Service gpm has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service term-tty1 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service console-font-tty1 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service host-name has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service virtual-terminal has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service term-tty2 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service console-font-tty2 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service host-name has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service term-tty3 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service console-font-tty3 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service host-name has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service term-tty4 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service console-font-tty4 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service host-name has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service term-tty5 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service console-font-tty5 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service host-name has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service term-tty6 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service console-font-tty6 has been started.
Apr 19 20:04:46 localhost shepherd[1]: Service guix-daemon has been started.
Apr 19 20:04:56 localhost installer[255]: running step 'locale'
Apr 19 20:04:56 localhost installer[255]: running step 'language'
Apr 19 20:04:57 localhost installer[255]: running form #<newt-form 8fc7370> ("Locale language") with 0 clients
Apr 19 20:05:13 localhost installer[255]: running step 'territory'
Apr 19 20:05:13 localhost installer[255]: running form #<newt-form 8fc44d0> ("Locale location") with 0 clients
Apr 19 20:05:17 localhost installer[255]: running step 'codeset'
Apr 19 20:05:17 localhost installer[255]: running step 'modifier'
Apr 19 20:05:17 localhost shepherd[1]: Service console-font-tty2 has been stopped.
Apr 19 20:05:17 localhost shepherd[1]: Service term-tty2 has been stopped.
Apr 19 20:05:17 localhost shepherd[1]: Service host-name has been started.
Apr 19 20:05:17 localhost shepherd[1]: Service term-tty2 has been started.
Apr 19 20:05:17 localhost installer[255]: running step 'welcome'
Apr 19 20:05:17 localhost installer[255]: running form #<newt-form a2ab210> ("GNU Guix install") with 0 clients
Apr 19 20:05:21 localhost installer[255]: running step 'timezone'
Apr 19 20:05:21 localhost installer[255]: running form #<newt-form a2ab400> ("Timezone") with 0 clients
Apr 19 20:05:27 localhost installer[255]: running form #<newt-form a2a65c0> ("Timezone") with 0 clients
Apr 19 20:05:32 localhost installer[255]: running step 'keymap'
Apr 19 20:05:33 localhost installer[255]: running step 'layout'
Apr 19 20:05:33 localhost installer[255]: running form #<newt-form a2a69a0> ("Layout") with 0 clients
Apr 19 20:06:12 localhost installer[255]: running form #<newt-form a2a65c0> ("Installation menu") with 0 clients
Apr 19 20:06:15 localhost installer[255]: running step 'locale'
Apr 19 20:06:15 localhost installer[255]: running step 'language'
Apr 19 20:06:15 localhost installer[255]: running form #<newt-form a2a6440> ("Locale language") with 0 clients
Apr 19 20:06:23 localhost vmunix: [ 125.145573] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
Apr 19 20:06:28 localhost installer[255]: running step 'territory'
Apr 19 20:06:28 localhost installer[255]: running form #<newt-form a2a6d30> ("Locale location") with 0 clients
Apr 19 20:06:57 localhost vmunix: [ 159.109894] perf: interrupt took too long (3138 > 3128), lowering kernel.perf_event_max_sample_rate to 63500
Apr 19 20:06:59 localhost installer[255]: running step 'codeset'
Apr 19 20:06:59 localhost installer[255]: running step 'modifier'
Apr 19 20:06:59 localhost shepherd[1]: Service term-tty2 has been stopped.
Apr 19 20:06:59 localhost shepherd[1]: Service host-name has been started.
Apr 19 20:06:59 localhost shepherd[1]: Service term-tty2 has been started.
Apr 19 20:06:59 localhost installer[255]: running step 'welcome'
Apr 19 20:06:59 localhost installer[255]: running form #<newt-form a2b28d0> ("GNU Guix install") with 0 clients
Apr 19 20:07:28 localhost installer[255]: running step 'timezone'
Apr 19 20:07:28 localhost installer[255]: running form #<newt-form a2b04a0> ("Timezone") with 0 clients
Apr 19 20:07:31 localhost installer[255]: running form #<newt-form a2af6e0> ("Timezone") with 0 clients
Apr 19 20:07:40 localhost installer[255]: running step 'keymap'
Apr 19 20:07:41 localhost installer[255]: running step 'layout'
Apr 19 20:07:41 localhost installer[255]: running form #<newt-form a2af770> ("Layout") with 0 clients
Apr 19 20:07:51 localhost vmunix: [ 213.320397] perf: interrupt took too long (3945 > 3922), lowering kernel.perf_event_max_sample_rate to 50500
Apr 19 20:07:59 localhost installer[255]: running step 'variant'
Apr 19 20:07:59 localhost installer[255]: running form #<newt-form a2af0e0> ("Variant") with 0 clients
Apr 19 20:08:10 localhost installer[255]: running step 'hostname'
Apr 19 20:08:10 localhost installer[255]: running form #<newt-form a2a6440> ("Hostname") with 0 clients
Apr 19 20:08:27 localhost installer[255]: running step 'network'
Apr 19 20:08:27 localhost installer[255]: running step 'select-technology'
Apr 19 20:08:28 localhost installer[255]: running form #<newt-form a2b1cd0> ("Internet access") with 0 clients
Apr 19 20:08:32 localhost installer[255]: running step 'power-technology'
Apr 19 20:08:32 localhost connmand[219]: wlp2s0 {update} flags 36931 <UP,RUNNING>
Apr 19 20:08:32 localhost connmand[219]: wlp2s0 {newlink} index 3 address 48:5D:60:7F:9D:BF mtu 1500
Apr 19 20:08:32 localhost connmand[219]: wlp2s0 {newlink} index 3 operstate 0 <UNKNOWN>
Apr 19 20:08:32 localhost connmand[219]: wlp2s0 {update} flags 36867 <UP>
Apr 19 20:08:32 localhost connmand[219]: wlp2s0 {newlink} index 3 address 48:5D:60:7F:9D:BF mtu 1500
Apr 19 20:08:32 localhost connmand[219]: wlp2s0 {newlink} index 3 operstate 2 <DOWN>
Apr 19 20:08:32 localhost connmand[219]: wlp2s0 {newlink} index 3 address 48:5D:60:7F:9D:BF mtu 1500
Apr 19 20:08:32 localhost connmand[219]: wlp2s0 {newlink} index 3 operstate 2 <DOWN>
Apr 19 20:08:32 localhost wpa_supplicant[218]: WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance
Apr 19 20:08:33 localhost installer[255]: running step 'connect-service'
Apr 19 20:08:36 localhost dbus-daemon[216]: [system] Activating service name='net.connman.vpn' requested by ':1.8' (uid=0 pid=286 comm="connmanctl ") (using servicehelper)
Apr 19 20:08:36 localhost dbus-daemon[216]: [system] Successfully activated service 'net.connman.vpn'
Apr 19 20:08:36 localhost connman-vpnd[288]: Connection Manager VPN daemon version 1.38
Apr 19 20:08:36 localhost connman-vpnd[288]: Can't load /gnu/store/nrx6p83q82zidsrz5h5fp7z0jh9973yn-connman-1.38/lib/connman/plugins-vpn/wireguard.so: /gnu/store/nrx6p83q82zidsrz5h5fp7z0jh9973yn-connman-1.38/lib/connman/plugins-vpn/wireguard.so: undefined symbol: __vpn_ipconfig_foreach
Apr 19 20:08:36 localhost connman-vpnd[288]: lo {newlink} index 1 operstate 0 <UNKNOWN>
Apr 19 20:08:36 localhost connman-vpnd[288]: enp1s0 {create} index 2 type 1 <ETHER>
Apr 19 20:08:36 localhost connman-vpnd[288]: enp1s0 {update} flags 36867 <UP>
Apr 19 20:08:36 localhost connman-vpnd[288]: enp1s0 {newlink} index 2 address BC:AE:C5:32:CC:E2 mtu 1500
Apr 19 20:08:36 localhost connman-vpnd[288]: enp1s0 {newlink} index 2 operstate 2 <DOWN>
Apr 19 20:08:36 localhost connman-vpnd[288]: wlp2s0 {create} index 3 type 1 <ETHER>
Apr 19 20:08:36 localhost connman-vpnd[288]: wlp2s0 {update} flags 36867 <UP>
Apr 19 20:08:36 localhost connman-vpnd[288]: wlp2s0 {newlink} index 3 address 48:5D:60:7F:9D:BF mtu 1500
Apr 19 20:08:36 localhost connman-vpnd[288]: wlp2s0 {newlink} index 3 operstate 2 <DOWN>
Apr 19 20:09:53 localhost vmunix: [ 334.465815] perf: interrupt took too long (4936 > 4931), lowering kernel.perf_event_max_sample_rate to 40500
Apr 19 20:11:58 localhost vmunix: [ 459.385924] perf: interrupt took too long (6176 > 6170), lowering kernel.perf_event_max_sample_rate to 32250
Apr 19 20:12:47 localhost vmunix: [ 508.370088] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
Apr 19 20:12:47 localhost vmunix: [ 508.370116] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {newlink} index 2 address BC:AE:C5:32:CC:E2 mtu 1500
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {newlink} index 2 operstate 6 <UP>
Apr 19 20:12:47 localhost connman-vpnd[288]: enp1s0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
Apr 19 20:12:47 localhost connman-vpnd[288]: enp1s0 {newlink} index 2 address BC:AE:C5:32:CC:E2 mtu 1500
Apr 19 20:12:47 localhost connman-vpnd[288]: enp1s0 {newlink} index 2 operstate 6 <UP>
Apr 19 20:12:47 localhost vmunix: [ 508.533048] 8021q: 802.1Q VLAN Support v1.8
Apr 19 20:12:47 localhost connmand[219]: Cannot create /var/run/connman/resolv.conf falling back to /etc/resolv.conf
Apr 19 20:12:47 localhost nscd: 220 monitored file `/etc/resolv.conf` was written to
Apr 19 20:12:47 localhost last message repeated 2 times
Apr 19 20:12:47 localhost connmand[219]: Setting hostname to gnu
Apr 19 20:12:47 localhost connmand[219]: Setting domainname to lan
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {add} address 192.168.1.106/24 label enp1s0 family 2
Apr 19 20:12:47 localhost nscd: 220 monitored file `/etc/resolv.conf` was written to
Apr 19 20:12:47 localhost last message repeated 5 times
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {add} route 192.168.1.0 gw 0.0.0.0 scope 253 <LINK>
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {add} route 192.168.1.222 gw 0.0.0.0 scope 253 <LINK>
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {add} route 0.0.0.0 gw 192.168.1.222 scope 0 <UNIVERSE>
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {add} route 212.227.81.55 gw 192.168.1.222 scope 0 <UNIVERSE>
Apr 19 20:12:47 localhost connmand[219]: enp1s0 {del} route 212.227.81.55 gw 192.168.1.222 scope 0 <UNIVERSE>
[-- Attachment #3: guix_install_guixversion_19Apr20.log --]
[-- Type: text/x-log, Size: 270 bytes --]
guix (GNU Guix) 1.1.0rc2-1.9d0d27f
Copyright (C) 2020 the Guix authors
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
[-- Attachment #4: guix_install_dmesg_19Apr20.log --]
[-- Type: text/x-log, Size: 52793 bytes --]
[ 0.000000] Linux version 5.4.31-gnu (nixbld@) (gcc version 7.4.0 (GCC)) #1 SMP 1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e2000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f68ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f690000-0x000000007f69dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f69e000-0x000000007f6dffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f6e0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: ASUSTeK Computer INC. T101MT/T101MT, BIOS 0601 07/26/2010
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1662.484 MHz processor
[ 0.006577] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.006585] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.006601] last_pfn = 0x7f690 max_arch_pfn = 0x1000000
[ 0.006613] MTRR default type: uncachable
[ 0.006616] MTRR fixed ranges enabled:
[ 0.006621] 00000-9FFFF write-back
[ 0.006625] A0000-BFFFF uncachable
[ 0.006629] C0000-CFFFF write-protect
[ 0.006633] D0000-DFFFF uncachable
[ 0.006637] E0000-EFFFF write-through
[ 0.006641] F0000-FFFFF write-protect
[ 0.006644] MTRR variable ranges enabled:
[ 0.006649] 0 base 000000000 mask 080000000 write-back
[ 0.006654] 1 base 07F700000 mask 0FFF00000 uncachable
[ 0.006658] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.006661] 3 disabled
[ 0.006664] 4 disabled
[ 0.006667] 5 disabled
[ 0.006670] 6 disabled
[ 0.006673] 7 disabled
[ 0.006863] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.006983] total RAM covered: 2039M
[ 0.008227] Found optimal setting for mtrr clean up
[ 0.008231] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.018669] found SMP MP-table at [mem 0x000ff780-0x000ff78f]
[ 0.027405] check: Scanning 1 areas for low memory corruption
[ 0.027409] initial memory mapped: [mem 0x00000000-0x0f5fffff]
[ 0.027555] BRK [0x0f08f000, 0x0f08ffff] PGTABLE
[ 0.027604] BRK [0x0f090000, 0x0f090fff] PGTABLE
[ 0.027612] RAMDISK: [mem 0x36c41000-0x37617fff]
[ 0.027618] Allocated new RAMDISK: [mem 0x3626a000-0x36c408cf]
[ 0.040729] Move RAMDISK from [mem 0x36c41000-0x376178cf] to [mem 0x3626a000-0x36c408cf]
[ 0.040748] ACPI: Early table checksum verification disabled
[ 0.040759] ACPI: RSDP 0x00000000000FBEF0 000024 (v02 ACPIAM)
[ 0.040770] ACPI: XSDT 0x000000007F690100 00006C (v01 _ASUS_ Notebook 07001026 MSFT 00000097)
[ 0.040787] ACPI: FACP 0x000000007F690290 0000F4 (v04 A_M_I_ OEMFACP 07001026 MSFT 00000097)
[ 0.040806] ACPI: DSDT 0x000000007F690490 008456 (v02 A1437 A1437000 00000000 INTL 20051117)
[ 0.040819] ACPI: FACS 0x000000007F69E000 000040
[ 0.040829] ACPI: FACS 0x000000007F69E000 000040
[ 0.040838] ACPI: APIC 0x000000007F690390 00005C (v02 A_M_I_ OEMAPIC 07001026 MSFT 00000097)
[ 0.040851] ACPI: MCFG 0x000000007F6903F0 00003C (v01 A_M_I_ OEMMCFG 07001026 MSFT 00000097)
[ 0.040863] ACPI: ECDT 0x000000007F690430 000055 (v01 A_M_I_ OEMECDT 07001026 MSFT 00000097)
[ 0.040875] ACPI: OEMB 0x000000007F69E040 000061 (v01 A_M_I_ AMI_OEM 07001026 MSFT 00000097)
[ 0.040888] ACPI: HPET 0x000000007F6988F0 000038 (v01 A_M_I_ OEMHPET 07001026 MSFT 00000097)
[ 0.040900] ACPI: GSCI 0x000000007F69E0B0 002024 (v01 A_M_I_ GMCHSCI 07001026 MSFT 00000097)
[ 0.040913] ACPI: SSDT 0x000000007F6A0DF0 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.040925] ACPI: SLIC 0x000000007F698930 000176 (v01 _ASUS_ Notebook 07001026 MSFT 00000097)
[ 0.040961] ACPI: Local APIC address 0xfee00000
[ 0.040971] 1152MB HIGHMEM available.
[ 0.040977] 885MB LOWMEM available.
[ 0.040980] mapped low ram: 0 - 375fe000
[ 0.040982] low ram: 0 - 375fe000
[ 0.041006] BRK [0x0f091000, 0x0f091fff] PGTABLE
[ 0.045076] Zone ranges:
[ 0.045080] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.045086] Normal [mem 0x0000000001000000-0x00000000375fdfff]
[ 0.045090] HighMem [mem 0x00000000375fe000-0x000000007f68ffff]
[ 0.045094] Movable zone start for each node
[ 0.045096] Early memory node ranges
[ 0.045100] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.045105] node 0: [mem 0x0000000000100000-0x000000007f68ffff]
[ 0.045203] Zeroed struct page in unavailable ranges: 2514 pages
[ 0.045208] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f68ffff]
[ 0.045213] On node 0 totalpages: 521774
[ 0.045217] DMA zone: 40 pages used for memmap
[ 0.045220] DMA zone: 0 pages reserved
[ 0.045224] DMA zone: 3998 pages, LIFO batch:0
[ 0.045435] Normal zone: 2175 pages used for memmap
[ 0.045439] Normal zone: 222718 pages, LIFO batch:63
[ 0.056563] HighMem zone: 295058 pages, LIFO batch:63
[ 0.071312] Using APIC driver default
[ 0.071329] Reserving Intel graphics memory at [mem 0x7f800000-0x7fffffff]
[ 0.071544] ACPI: PM-Timer IO Port: 0x808
[ 0.071550] ACPI: Local APIC address 0xfee00000
[ 0.071581] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.071589] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.071595] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.071600] ACPI: IRQ0 used by override.
[ 0.071604] ACPI: IRQ9 used by override.
[ 0.071611] Using ACPI (MADT) for SMP configuration information
[ 0.071616] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.071632] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.071671] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.071677] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.071680] PM: Registered nosave memory: [mem 0x000a0000-0x000e1fff]
[ 0.071683] PM: Registered nosave memory: [mem 0x000e2000-0x000fffff]
[ 0.071690] [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.071693] Booting paravirtualized kernel on bare hardware
[ 0.071703] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.071722] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.072038] percpu: Embedded 33 pages/cpu s103948 r0 d31220 u135168
[ 0.072058] pcpu-alloc: s103948 r0 d31220 u135168 alloc=33*4096
[ 0.072062] pcpu-alloc: [0] 0 [0] 1
[ 0.072118] Built 1 zonelists, mobility grouping on. Total pages: 519559
[ 0.072126] Kernel command line: BOOT_IMAGE=/gnu/store/506a8398hzkdqcm6y7r45fm0dvpaagks-linux-libre-5.4.31/bzImage --root=31393730-3031-3031-3139-343934363833 --system=/gnu/store/sm6p8h5mwd18ynj1pm0gqfyy0l5zph6a-system --load=/gnu/store/sm6p8h5mwd18ynj1pm0gqfyy0l5zph6a-system/boot quiet modprobe.blacklist=radeon
[ 0.072779] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.072991] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.073020] Initializing CPU#0
[ 0.073031] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[ 0.126982] Initializing HighMem for node 0 (000375fe:0007f690)
[ 0.270572] Initializing Movable for node 0 (00000000:00000000)
[ 0.280026] Memory: 1972520K/2087096K available (9653K kernel code, 926K rwdata, 3720K rodata, 1212K init, 820K bss, 114576K reserved, 0K cma-reserved, 1180232K highmem)
[ 0.280041] virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
cpu_entry : 0xffa00000 - 0xffb39000 (1252 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xcee0f000 - 0xcef3e000 (1212 kB)
.data : 0xce96d4cc - 0xcedf98c0 (4656 kB)
.text : 0xce000000 - 0xce96d4cc (9653 kB)
[ 0.280043] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.280079] random: get_random_u32 called from __kmem_cache_create+0x35/0x490 with crng_init=0
[ 0.280713] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.280758] ftrace: allocating 39672 entries in 78 pages
[ 0.331209] rcu: Hierarchical RCU implementation.
[ 0.331213] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.331218] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.331221] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.342925] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[ 0.346215] Console: colour VGA+ 80x25
[ 0.346226] printk: console [tty0] enabled
[ 0.346252] ACPI: Core revision 20190816
[ 0.346572] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.346602] APIC: Switch to symmetric I/O mode setup
[ 0.346606] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.347251] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.366605] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x17f6b730dc7, max_idle_ns: 440795216274 ns
[ 0.366618] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.96 BogoMIPS (lpj=6649936)
[ 0.366626] pid_max: default: 32768 minimum: 301
[ 0.366770] LSM: Security Framework initializing
[ 0.366813] Yama: becoming mindful.
[ 0.366906] AppArmor: AppArmor initialized
[ 0.366912] TOMOYO Linux initialized
[ 0.367040] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.367049] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.367102] *** VALIDATE tmpfs ***
[ 0.367530] *** VALIDATE proc ***
[ 0.367714] *** VALIDATE cgroup1 ***
[ 0.367719] *** VALIDATE cgroup2 ***
[ 0.367829] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.367836] process: using mwait in idle threads
[ 0.367850] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.367854] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.368124] Freeing SMP alternatives memory: 28K
[ 0.486553] smpboot: CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0xa)
[ 0.486611] Performance Events: PEBS fmt0+, Atom events, 8-deep LBR, Intel PMU driver.
[ 0.486611] ... version: 3
[ 0.486611] ... bit width: 40
[ 0.486611] ... generic registers: 2
[ 0.486611] ... value mask: 000000ffffffffff
[ 0.486611] ... max period: 000000007fffffff
[ 0.486611] ... fixed-purpose events: 3
[ 0.486611] ... event mask: 0000000700000003
[ 0.486611] rcu: Hierarchical SRCU implementation.
[ 0.486611] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.486611] smp: Bringing up secondary CPUs ...
[ 0.486611] x86: Booting SMP configuration:
[ 0.486611] .... node #0, CPUs: #1
[ 0.007295] Initializing CPU#1
[ 0.007295] Disabled fast string operations
[ 0.486840] smp: Brought up 1 node, 2 CPUs
[ 0.486840] smpboot: Max logical packages: 1
[ 0.486840] smpboot: Total of 2 processors activated (6649.93 BogoMIPS)
[ 0.488800] allocated 2097152 bytes of page_ext
[ 0.488964] devtmpfs: initialized
[ 0.490820] PM: Registering ACPI NVS region [mem 0x7f69e000-0x7f6dffff] (270336 bytes)
[ 0.491069] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.491091] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.491313] pinctrl core: initialized pinctrl subsystem
[ 0.491653] PM: RTC time: 18:04:19, date: 2020-04-19
[ 0.491944] NET: Registered protocol family 16
[ 0.492388] audit: initializing netlink subsys (disabled)
[ 0.492442] audit: type=2000 audit(1587319458.144:1): state=initialized audit_enabled=0 res=1
[ 0.492442] EISA bus registered
[ 0.492442] cpuidle: using governor ladder
[ 0.492442] cpuidle: using governor menu
[ 0.492442] ACPI: bus type PCI registered
[ 0.492442] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.492442] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.492442] PCI: not using MMCONFIG
[ 0.495108] PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.495198] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.495201] PCI: Using configuration type 1 for base access
[ 0.501597] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.510980] ACPI: Added _OSI(Module Device)
[ 0.510984] ACPI: Added _OSI(Processor Device)
[ 0.510987] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.510990] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.510995] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.510999] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.511002] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.527031] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.528192] ACPI: EC: EC started
[ 0.528195] ACPI: EC: interrupt blocked
[ 0.529788] ACPI: \: Used as first EC
[ 0.529794] ACPI: \: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.529796] ACPI: EC: Boot ECDT EC used to handle transactions
[ 0.535530] ACPI: Dynamic OEM Table Load:
[ 0.536043] ACPI: SSDT 0x00000000F0D31800 000326 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.539538] ACPI: Dynamic OEM Table Load:
[ 0.539557] ACPI: SSDT 0x00000000F0C0C000 000724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.541782] ACPI: Dynamic OEM Table Load:
[ 0.541796] ACPI: SSDT 0x00000000F0D31000 000217 (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.543222] ACPI: Dynamic OEM Table Load:
[ 0.543234] ACPI: SSDT 0x00000000F049B840 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.544770] ACPI: Interpreter enabled
[ 0.544839] ACPI: (supports S0 S3 S4 S5)
[ 0.544843] ACPI: Using IOAPIC for interrupt routing
[ 0.544959] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.546483] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.546486] PCI: Using MMCONFIG for extended config space
[ 0.546499] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.547107] ACPI: Enabled 4 GPEs in block 00 to 1F
[ 0.561672] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.565472] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.565488] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.565504] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.566144] PCI host bridge to bus 0000:00
[ 0.566152] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.566158] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.566163] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.566169] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.566175] pci_bus 0000:00: root bus resource [mem 0x7f700000-0xfed8ffff window]
[ 0.566180] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.566208] pci 0000:00:00.0: [8086:a010] type 00 class 0x060000
[ 0.566464] pci 0000:00:02.0: [8086:a011] type 00 class 0x030000
[ 0.566484] pci 0000:00:02.0: reg 0x10: [mem 0xf7e00000-0xf7e7ffff]
[ 0.566493] pci 0000:00:02.0: reg 0x14: [io 0xdc00-0xdc07]
[ 0.566503] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[ 0.566512] pci 0000:00:02.0: reg 0x1c: [mem 0xf7d00000-0xf7dfffff]
[ 0.566829] pci 0000:00:02.1: [8086:a012] type 00 class 0x038000
[ 0.566847] pci 0000:00:02.1: reg 0x10: [mem 0xf7e80000-0xf7efffff]
[ 0.567135] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.567180] pci 0000:00:1b.0: reg 0x10: [mem 0xf7cf8000-0xf7cfbfff 64bit]
[ 0.567318] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.567556] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.567730] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.568049] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.568216] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.568519] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.568685] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.568988] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.569061] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.569367] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.569441] pci 0000:00:1d.1: reg 0x20: [io 0xd480-0xd49f]
[ 0.569733] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.569806] pci 0000:00:1d.2: reg 0x20: [io 0xd800-0xd81f]
[ 0.570101] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.570174] pci 0000:00:1d.3: reg 0x20: [io 0xd880-0xd89f]
[ 0.570474] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.570510] pci 0000:00:1d.7: reg 0x10: [mem 0xf7cf7c00-0xf7cf7fff]
[ 0.570656] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.570938] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.571309] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.571721] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.571757] pci 0000:00:1f.2: reg 0x10: [io 0xd080-0xd087]
[ 0.571774] pci 0000:00:1f.2: reg 0x14: [io 0xd000-0xd003]
[ 0.571789] pci 0000:00:1f.2: reg 0x18: [io 0xcc00-0xcc07]
[ 0.571804] pci 0000:00:1f.2: reg 0x1c: [io 0xc880-0xc883]
[ 0.571820] pci 0000:00:1f.2: reg 0x20: [io 0xc800-0xc81f]
[ 0.571837] pci 0000:00:1f.2: reg 0x24: [mem 0xf7cf7800-0xf7cf7bff]
[ 0.571917] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.572292] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.572432] pci 0000:02:00.0: [168c:002b] type 00 class 0x028000
[ 0.572495] pci 0000:02:00.0: reg 0x10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.572716] pci 0000:02:00.0: supports D1
[ 0.572722] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.572968] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.572981] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.572993] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.573121] pci 0000:01:00.0: [1969:1062] type 00 class 0x020000
[ 0.573179] pci 0000:01:00.0: reg 0x10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.573199] pci 0000:01:00.0: reg 0x18: [io 0xec00-0xec7f]
[ 0.573382] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.573613] pci 0000:00:1c.3: PCI bridge to [bus 01]
[ 0.573622] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.573630] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.573671] pci_bus 0000:05: extended config space not accessible
[ 0.573788] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.573807] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.573813] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.573818] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.573823] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.573829] pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xfed8ffff window] (subtractive decode)
[ 0.573868] pci_bus 0000:00: on NUMA node 0
[ 0.575773] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.575972] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.576168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.576363] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.576557] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.576754] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.576949] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.577145] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.577682] ACPI: EC: interrupt unblocked
[ 0.577702] ACPI: EC: event unblocked
[ 0.577717] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.577723] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
[ 0.578055] iommu: Default domain type: Translated
[ 0.578123] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.578123] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.578123] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.578123] vgaarb: loaded
[ 0.579055] SCSI subsystem initialized
[ 0.579224] libata version 3.00 loaded.
[ 0.579299] ACPI: bus type USB registered
[ 0.579357] usbcore: registered new interface driver usbfs
[ 0.579387] usbcore: registered new interface driver hub
[ 0.579440] usbcore: registered new device driver usb
[ 0.579688] EDAC MC: Ver: 3.0.0
[ 0.580197] PCI: Using ACPI for IRQ routing
[ 0.580266] PCI: pci_cache_line_size set to 64 bytes
[ 0.580346] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[ 0.580351] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.580356] e820: reserve RAM buffer [mem 0x7f690000-0x7fffffff]
[ 0.580750] NetLabel: Initializing
[ 0.580754] NetLabel: domain hash size = 128
[ 0.580756] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.580803] NetLabel: unlabeled traffic allowed by default
[ 0.580871] hpet: 3 channels of 0 reserved for per-cpu timers
[ 0.580871] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.580871] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.582691] clocksource: Switched to clocksource tsc-early
[ 0.636982] *** VALIDATE bpf ***
[ 0.637210] VFS: Disk quotas dquot_6.6.0
[ 0.637263] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.637336] *** VALIDATE ramfs ***
[ 0.637350] *** VALIDATE hugetlbfs ***
[ 0.637720] AppArmor: AppArmor Filesystem Enabled
[ 0.637831] pnp: PnP ACPI init
[ 0.638074] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.638082] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.638104] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.638300] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.638485] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.638640] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[ 0.639224] system 00:04: [io 0x025c-0x025f] has been reserved
[ 0.639232] system 00:04: [io 0x0380-0x0383] has been reserved
[ 0.639238] system 00:04: [io 0x0400-0x041f] has been reserved
[ 0.639245] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.639251] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.639257] system 00:04: [io 0x0480-0x04bf] has been reserved
[ 0.639266] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.639272] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.639279] system 00:04: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.639285] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.639292] system 00:04: [mem 0xfff00000-0xffffffff] could not be reserved
[ 0.639314] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.639679] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.639687] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.639707] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.639915] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.639935] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.640620] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.640628] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.640634] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.640641] system 00:07: [mem 0x00100000-0x7f6fffff] could not be reserved
[ 0.640647] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.640667] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.641201] pnp: PnP ACPI: found 8 devices
[ 0.641208] PnPBIOS: Disabled by ACPI PNP
[ 0.648416] thermal_sys: Registered thermal governor 'fair_share'
[ 0.648420] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.648423] thermal_sys: Registered thermal governor 'step_wise'
[ 0.648426] thermal_sys: Registered thermal governor 'user_space'
[ 0.648428] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.682993] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.683155] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.683165] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.683173] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[ 0.683181] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000
[ 0.683191] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.683221] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.683238] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.683252] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.683263] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.683272] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.683280] pci 0000:00:1c.0: PCI bridge to [bus 04]
[ 0.683288] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.683299] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff]
[ 0.683307] pci 0000:00:1c.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.683319] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.683325] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.683334] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.683343] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.683353] pci 0000:00:1c.3: PCI bridge to [bus 01]
[ 0.683359] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.683369] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.683377] pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.683389] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.683409] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.683415] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.683420] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.683425] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.683431] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xfed8ffff window]
[ 0.683436] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.683441] pci_bus 0000:04: resource 1 [mem 0x80000000-0x801fffff]
[ 0.683447] pci_bus 0000:04: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.683452] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.683457] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.683463] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.683468] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.683473] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.683479] pci_bus 0000:01: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.683485] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.683490] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.683495] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.683501] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.683506] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xfed8ffff window]
[ 0.683797] NET: Registered protocol family 2
[ 0.684339] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[ 0.684370] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.684437] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.684491] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.684586] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.684610] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.684757] NET: Registered protocol family 1
[ 0.684801] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.686477] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[ 0.686487] PCI: CLS 32 bytes, default 64
[ 0.686734] Trying to unpack rootfs image as initramfs...
[ 1.360889] Freeing initrd memory: 10076K
[ 1.360956] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.360961] software IO TLB: mapped [mem 0x31000000-0x35000000] (64MB)
[ 1.361378] check: Scanning for low memory corruption every 60 seconds
[ 1.362715] Initialise system trusted keyrings
[ 1.362871] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.368347] zbud: loaded
[ 1.370507] Allocating IMA blacklist keyring.
[ 1.384941] Key type asymmetric registered
[ 1.384945] Asymmetric key parser 'x509' registered
[ 1.385085] bounce: pool size: 64 pages
[ 1.385151] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.385352] io scheduler mq-deadline registered
[ 1.385901] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.386415] pcieport 0000:00:1c.1: enabling device (0106 -> 0107)
[ 1.387342] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.387463] intel_idle: MWAIT substates: 0x20220
[ 1.387467] intel_idle: v0.4.1 model 0x1C
[ 1.387478] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.387654] clocksource: Switched to clocksource hpet
[ 1.387942] intel_idle: lapic_timer_reliable_states 0x2
[ 1.388198] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.388270] ACPI: Lid Switch [LID]
[ 1.388402] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 1.388469] ACPI: Sleep Button [SLPB]
[ 1.388590] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.388661] ACPI: Power Button [PWRB]
[ 1.388786] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.388921] ACPI: Power Button [PWRF]
[ 1.407307] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.407311] ACPI: Thermal Zone [TZ00] (50 C)
[ 1.407456] isapnp: Scanning for PnP cards...
[ 1.761231] isapnp: No Plug & Play device found
[ 1.761544] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.769606] Linux agpgart interface v0.103
[ 1.779637] brd: module loaded
[ 1.786497] loop: module loaded
[ 1.787893] libphy: Fixed MDIO Bus: probed
[ 1.787898] tun: Universal TUN/TAP device driver, 1.6
[ 1.788059] PPP generic driver version 2.4.2
[ 1.788224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.788239] ehci-pci: EHCI PCI platform driver
[ 1.788571] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.788590] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.788613] ehci-pci 0000:00:1d.7: debug port 1
[ 1.792542] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.792580] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf7cf7c00
[ 1.806741] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.806948] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 1.806954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.806959] usb usb1: Product: EHCI Host Controller
[ 1.806963] usb usb1: Manufacturer: Linux 5.4.31-gnu ehci_hcd
[ 1.806968] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.807439] hub 1-0:1.0: USB hub found
[ 1.807467] hub 1-0:1.0: 8 ports detected
[ 1.808578] ehci-platform: EHCI generic platform driver
[ 1.808633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.808651] ohci-pci: OHCI PCI platform driver
[ 1.808690] ohci-platform: OHCI generic platform driver
[ 1.808715] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.808977] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.808996] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.809013] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.809065] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 1.809276] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 1.809282] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.809287] usb usb2: Product: UHCI Host Controller
[ 1.809291] usb usb2: Manufacturer: Linux 5.4.31-gnu uhci_hcd
[ 1.809296] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.809747] hub 2-0:1.0: USB hub found
[ 1.809775] hub 2-0:1.0: 2 ports detected
[ 1.810467] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.810486] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.810500] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.810578] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 1.810855] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 1.810861] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.810865] usb usb3: Product: UHCI Host Controller
[ 1.810870] usb usb3: Manufacturer: Linux 5.4.31-gnu uhci_hcd
[ 1.810874] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.811318] hub 3-0:1.0: USB hub found
[ 1.811346] hub 3-0:1.0: 2 ports detected
[ 1.812087] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.812105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.812119] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.812195] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 1.812402] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 1.812408] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.812412] usb usb4: Product: UHCI Host Controller
[ 1.812417] usb usb4: Manufacturer: Linux 5.4.31-gnu uhci_hcd
[ 1.812421] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.812851] hub 4-0:1.0: USB hub found
[ 1.812879] hub 4-0:1.0: 2 ports detected
[ 1.813576] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.813594] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.813609] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 1.813678] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 1.813882] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.04
[ 1.813888] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.813892] usb usb5: Product: UHCI Host Controller
[ 1.813897] usb usb5: Manufacturer: Linux 5.4.31-gnu uhci_hcd
[ 1.813901] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.814334] hub 5-0:1.0: USB hub found
[ 1.814362] hub 5-0:1.0: 2 ports detected
[ 1.815148] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.833534] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.833551] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.834069] mousedev: PS/2 mouse device common for all mice
[ 1.834884] rtc_cmos 00:01: RTC can wake from S4
[ 1.835354] rtc_cmos 00:01: registered as rtc0
[ 1.835421] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.835452] i2c /dev entries driver
[ 1.835601] device-mapper: uevent: version 1.0.3
[ 1.835865] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.835945] platform eisa.0: Probing EISA bus 0
[ 1.835952] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.835957] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.835962] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.835966] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 1.835971] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 1.835975] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.835980] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.835985] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 1.835989] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 1.835994] platform eisa.0: EISA: Detected 0 cards
[ 1.836009] cpufreq_nforce2: No nForce2 chipset
[ 1.836012] intel_pstate: CPU model not supported
[ 1.836079] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.836903] NET: Registered protocol family 10
[ 1.837629] Segment Routing with IPv6
[ 1.837682] NET: Registered protocol family 17
[ 1.837828] Key type dns_resolver registered
[ 1.838439] microcode: sig=0x106ca, pf=0x4, revision=0x105
[ 1.838666] microcode: Microcode Update Driver: v2.2.
[ 1.838679] IPI shorthand broadcast: enabled
[ 1.838934] registered taskstats version 1
[ 1.838945] Loading compiled-in X.509 certificates
[ 1.839034] zswap: loaded using pool lzo/zbud
[ 1.840932] Key type big_key registered
[ 1.841602] Key type encrypted registered
[ 1.841614] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.841634] ima: No TPM chip found, activating TPM-bypass!
[ 1.841650] ima: Allocated hash algorithm: sha1
[ 1.841668] ima: No architecture policies found
[ 1.841698] evm: Initialising EVM extended attributes:
[ 1.841701] evm: security.selinux
[ 1.841703] evm: security.SMACK64
[ 1.841704] evm: security.SMACK64EXEC
[ 1.841706] evm: security.SMACK64TRANSMUTE
[ 1.841708] evm: security.SMACK64MMAP
[ 1.841710] evm: security.apparmor
[ 1.841711] evm: security.ima
[ 1.841713] evm: security.capability
[ 1.841716] evm: HMAC attrs: 0x1
[ 1.842463] PM: Magic number: 0:837:89
[ 1.842711] rtc_cmos 00:01: setting system clock to 2020-04-19T18:04:20 UTC (1587319460)
[ 1.844046] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.849158] Freeing unused kernel image memory: 1212K
[ 1.854593] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.865713] Write protecting kernel text and read-only data: 13380k
[ 1.865717] NX-protecting the kernel data: 6728k
[ 1.865995] Run /init as init process
[ 2.142721] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.151599] ahci 0000:00:1f.2: version 3.0
[ 2.152027] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 2.152036] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.153733] scsi host0: ahci
[ 2.154272] scsi host1: ahci
[ 2.154770] scsi host2: ahci
[ 2.155220] scsi host3: ahci
[ 2.155432] ata1: SATA max UDMA/133 abar m1024@0xf7cf7800 port 0xf7cf7900 irq 27
[ 2.155436] ata2: DUMMY
[ 2.155439] ata3: DUMMY
[ 2.155441] ata4: DUMMY
[ 2.176160] usb 1-1: New USB device found, idVendor=0781, idProduct=5575, bcdDevice= 1.00
[ 2.176167] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.176172] usb 1-1: Product: Cruzer Glide
[ 2.176176] usb 1-1: Manufacturer: SanDisk
[ 2.176180] usb 1-1: SerialNumber: 4C530001150503111030
[ 2.470804] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.471953] ata1.00: unexpected _GTF length (8)
[ 2.506685] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.634658] random: fast init done
[ 2.696782] usb 3-2: New USB device found, idVendor=0486, idProduct=0186, bcdDevice= 2.30
[ 2.696788] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.696793] usb 3-2: Product: MultiTouch(TTI)
[ 2.696797] usb 3-2: Manufacturer: AsusTek, Inc.
[ 2.771715] ata1.00: ATA-8: ST9250315AS, 0003SDM1, max UDMA/133
[ 2.771722] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 2.773975] ata1.00: unexpected _GTF length (8)
[ 2.774334] ata1.00: configured for UDMA/133
[ 2.774764] scsi 0:0:0:0: Direct-Access ATA ST9250315AS SDM1 PQ: 0 ANSI: 5
[ 2.775470] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.775883] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.775929] sd 0:0:0:0: [sda] Write Protect is off
[ 2.775936] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.776012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.850098] sda: sda1 sda2 sda3
[ 2.851653] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.859090] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 2.859518] scsi host4: usb-storage 1-1:1.0
[ 2.859810] usbcore: registered new interface driver usb-storage
[ 2.867895] usbcore: registered new interface driver uas
[ 2.873713] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.886184] usbcore: registered new interface driver usbhid
[ 2.886187] usbhid: USB HID core driver
[ 2.918413] input: AsusTek, Inc. MultiTouch(TTI) Touchscreen as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:0486:0186.0001/input/input6
[ 2.918902] input: AsusTek, Inc. MultiTouch(TTI) Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:0486:0186.0001/input/input7
[ 2.919262] input: AsusTek, Inc. MultiTouch(TTI) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:0486:0186.0001/input/input8
[ 2.919654] hid-generic 0003:0486:0186.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [AsusTek, Inc. MultiTouch(TTI)] on usb-0000:00:1d.1-2/input0
[ 2.975578] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[ 3.206746] usb 1-6: new high-speed USB device number 4 using ehci-pci
[ 3.238878] usb 1-6: New USB device found, idVendor=13d3, idProduct=5126, bcdDevice=12.09
[ 3.238884] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=2
[ 3.238888] usb 1-6: Product: USB 2.0 PC Cam
[ 3.238893] usb 1-6: Manufacturer: Image Processor
[ 3.238897] usb 1-6: SerialNumber: USB 2.0 PC Cam
[ 3.867543] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Glide 1.00 PQ: 0 ANSI: 6
[ 3.868277] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 3.868869] sd 4:0:0:0: [sdb] 30595072 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 3.870612] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.870660] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 3.871737] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 3.896904] sdb: sdb1 sdb2
[ 3.900883] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.175105] ISO 9660 Extensions: RRIP_1991A
[ 4.693087] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
[ 4.693159] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
[ 6.818661] random: crng init done
[ 21.334346] shepherd[1]: Service root has been started.
[ 22.017247] shepherd[1]: starting services...
[ 22.020534] shepherd[1]: Service root-file-system has been started.
[ 22.023485] shepherd[1]: Service user-file-systems has been started.
[ 22.048510] shepherd[1]: waiting for udevd...
[ 22.159119] udevd[184]: starting version 3.2.9
[ 22.247744] udevd[184]: starting eudev-3.2.9
[ 22.550071] udevd[184]: no sender credentials received, message ignored
[ 22.879207] ACPI: AC Adapter [AC0] (on-line)
[ 23.044477] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 23.094470] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000087F (\PMIO) (20190816/utaddress-213)
[ 23.094494] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082F (\_SB.PCI0.SBRG.IELK.GPSE) (20190816/utaddress-213)
[ 23.094510] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.094519] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20190816/utaddress-213)
[ 23.094534] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.094539] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004BF (\_SB.PCI0.SBRG.GPBX) (20190816/utaddress-213)
[ 23.094553] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.094556] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 23.095678] atl1c 0000:01:00.0: version 1.0.1.1-NAPI
[ 23.169369] mc: Linux media interface: v0.10
[ 23.266759] videodev: Linux video capture interface: v2.00
[ 23.385734] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 23.481209] intel_powerclamp: No package C-state available
[ 23.505902] input: AsusTek, Inc. MultiTouch(TTI) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:0486:0186.0001/input/input11
[ 23.507256] hid-multitouch 0003:0486:0186.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [AsusTek, Inc. MultiTouch(TTI)] on usb-0000:00:1d.1-2/input0
[ 23.516921] intel_powerclamp: No package C-state available
[ 23.608655] Error: Driver 'pcspkr' is already registered, aborting...
[ 23.661268] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (13d3:5126)
[ 23.679580] uvcvideo 1-6:1.0: Entity type for entity Processing 3 was not initialized!
[ 23.679593] uvcvideo 1-6:1.0: Entity type for entity Extension 2 was not initialized!
[ 23.679602] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 23.680083] input: USB 2.0 PC Cam as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input14
[ 23.680526] usbcore: registered new interface driver uvcvideo
[ 23.680531] USB Video Class driver (1.1.1)
[ 23.767052] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 24.009138] iTCO_vendor_support: vendor-support=0
[ 24.066458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 24.066607] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0860)
[ 24.067120] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 24.076721] asus_wmi: ASUS WMI generic driver loaded
[ 24.084628] atl1c 0000:01:00.0 enp1s0: renamed from eth0
[ 24.099865] eeepc_wmi: Found legacy ATKD device (ASUS010)
[ 24.099870] eeepc_wmi: WMI device present, but legacy ATKD device is also present and enabled
[ 24.099873] eeepc_wmi: You probably booted with acpi_osi="Linux" or acpi_osi="!Windows 2009"
[ 24.099876] eeepc_wmi: Can't load eeepc-wmi, use default acpi_osi (preferred) or eeepc-laptop
[ 24.099891] eeepc-wmi: probe of eeepc-wmi failed with error -16
[ 24.151565] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 24.151836] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 24.151842] cfg80211: failed to load regulatory.db
[ 24.162312] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 24.162322] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 24.162330] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 24.162335] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 24.162341] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 24.162349] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 24.162356] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 24.179312] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 24.179806] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 24.254734] pci 0000:00:00.0: Intel GMA3150 Chipset
[ 24.254797] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 24.254890] pci 0000:00:00.0: detected 8192K stolen memory
[ 24.254993] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 24.256410] Console: switching to colour dummy device 80x25
[ 24.259692] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 24.259695] [drm] Driver supports precise vblank timestamp query.
[ 24.265283] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 24.304315] [drm] RC6 disabled, disabling runtime PM support
[ 24.304532] [drm] Initialized overlay support.
[ 24.305933] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 24.306747] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 24.321327] acpi device:2b: registered as cooling_device2
[ 24.321668] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17
[ 24.344726] fbcon: i915drmfb (fb0) is primary device
[ 24.421762] ath: phy0: ASPM enabled: 0x42
[ 24.421767] ath: EEPROM regdomain: 0x60
[ 24.421768] ath: EEPROM indicates we should expect a direct regpair map
[ 24.421772] ath: Country alpha2 being used: 00
[ 24.421774] ath: Regpair used: 0x60
[ 24.426926] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 24.428058] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf7ea0000, irq=17
[ 24.439857] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 24.477786] psmouse serio1: synaptics: queried max coordinates: x [..5624], y [..4754]
[ 24.589241] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 600854
[ 24.659326] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 25.098276] Console: switching to colour frame buffer device 128x37
[ 25.123926] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 25.167847] shepherd[1]: Service udev has been started.
[ 25.172139] shepherd[1]: Service file-system-/tmp has been started.
[ 25.176356] shepherd[1]: Service file-system-/dev/pts has been started.
[ 25.180899] shepherd[1]: Service file-system-/dev/shm has been started.
[ 25.185219] shepherd[1]: Service file-system-/gnu/store has been started.
[ 25.188154] shepherd[1]: Service file-systems has been started.
[ 25.191223] shepherd[1]: Service user-processes has been started.
[ 25.194183] shepherd[1]: Service host-name has been started.
[ 25.226427] shepherd[1]: Service user-homes has been started.
[ 25.229359] shepherd[1]: Service uvesafb has been started.
[ 125.145573] perf: interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[ 159.109894] perf: interrupt took too long (3138 > 3128), lowering kernel.perf_event_max_sample_rate to 63500
[ 213.320397] perf: interrupt took too long (3945 > 3922), lowering kernel.perf_event_max_sample_rate to 50500
[ 334.465815] perf: interrupt took too long (4936 > 4931), lowering kernel.perf_event_max_sample_rate to 40500
[ 459.385924] perf: interrupt took too long (6176 > 6170), lowering kernel.perf_event_max_sample_rate to 32250
[ 508.370088] atl1c 0000:01:00.0: atl1c: enp1s0 NIC Link is Up<100 Mbps Full Duplex>
[ 508.370116] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 508.533048] 8021q: 802.1Q VLAN Support v1.8
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-04-19 19:26 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-12 19:45 bug#40583: guix-system-install-1.0.1.i686 fails to build amdgpu ryan
2020-04-13 10:46 ` Ludovic Courtès
2020-04-15 1:31 ` ryan
2020-04-15 8:12 ` Danny Milosavljevic
2020-04-16 16:35 ` Ludovic Courtès
2020-04-16 17:17 ` Ryan Desfosses
2020-04-17 8:23 ` Ludovic Courtès
2020-04-19 19:25 ` ryan
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).