* bug#22836: “guix build -S” fails when “source” is #f
@ 2016-02-28 10:58 Ricardo Wurmus
2016-09-27 9:47 ` Ludovic Courtès
0 siblings, 1 reply; 2+ messages in thread
From: Ricardo Wurmus @ 2016-02-28 10:58 UTC (permalink / raw)
To: 22836
I just did this:
guix build -S xfce
This resulted in this error message:
~~~~~~~~~~~~~~~~~~~~~~~
Backtrace:
In ice-9/boot-9.scm:
157: 18 [catch #t #<catch-closure 19a6780> ...]
In unknown file:
?: 17 [apply-smob/1 #<catch-closure 19a6780>]
In ice-9/boot-9.scm:
63: 16 [call-with-prompt prompt0 ...]
In ice-9/eval.scm:
432: 15 [eval # #]
In ice-9/boot-9.scm:
2401: 14 [save-module-excursion #<procedure 19c4940 at ice-9/boot-9.scm:4045:3 ()>]
4050: 13 [#<procedure 19c4940 at ice-9/boot-9.scm:4045:3 ()>]
1724: 12 [%start-stack load-stack ...]
1729: 11 [#<procedure 19dbea0 ()>]
In unknown file:
?: 10 [primitive-load "/home/rekado/dev/guix/scripts/guix"]
In guix/ui.scm:
1177: 9 [run-guix-command build "-S" "xfce"]
In ice-9/boot-9.scm:
157: 8 [catch srfi-34 #<procedure 205a080 at guix/ui.scm:413:2 ()> ...]
157: 7 [catch system-error ...]
In guix/scripts/build.scm:
638: 6 [#<procedure 205a120 at guix/scripts/build.scm:634:2 ()>]
591: 5 [options->derivations #<build-daemon 256.15 280efc0> (# # # # ...)]
In srfi/srfi-1.scm:
646: 4 [append-map #<procedure 280ebc0 at guix/scripts/build.scm:591:16 (expr)> #]
578: 3 [map #<procedure 280ebc0 at guix/scripts/build.scm:591:16 (expr)> (#)]
In guix/scripts/build.scm:
598: 2 [#<procedure 280ebc0 at guix/scripts/build.scm:591:16 (expr)> #]
In guix/store.scm:
1017: 1 [#<procedure 206fbe0 at guix/store.scm:1016:26 (store . args)> # #f]
In guix/packages.scm:
1073: 0 [origin->derivation #f "x86_64-linux"]
guix/packages.scm:1073:2: In procedure origin->derivation:
guix/packages.scm:1073:2: Throw to key `match-error' with args `("match" "no matching pattern" #f)'.
~~~~~~~~~~~~~~~~~~~~~~~
That’s expected, because the “xfce” package is a meta-package and thus
does not have any sources of its own. The “source” field is “#f”.
Guix should print a nice error message informing the user that the
requested package does not have any sources.
~~ Ricardo
^ permalink raw reply [flat|nested] 2+ messages in thread
* bug#22836: “guix build -S” fails when “source” is #f
2016-02-28 10:58 bug#22836: “guix build -S” fails when “source” is #f Ricardo Wurmus
@ 2016-09-27 9:47 ` Ludovic Courtès
0 siblings, 0 replies; 2+ messages in thread
From: Ludovic Courtès @ 2016-09-27 9:47 UTC (permalink / raw)
To: Ricardo Wurmus; +Cc: 22836-done
Ricardo Wurmus <rekado@elephly.net> skribis:
> I just did this:
>
> guix build -S xfce
>
> This resulted in this error message:
>
> ~~~~~~~~~~~~~~~~~~~~~~~
> Backtrace:
> In ice-9/boot-9.scm:
> 157: 18 [catch #t #<catch-closure 19a6780> ...]
> In unknown file:
> ?: 17 [apply-smob/1 #<catch-closure 19a6780>]
> In ice-9/boot-9.scm:
> 63: 16 [call-with-prompt prompt0 ...]
> In ice-9/eval.scm:
> 432: 15 [eval # #]
> In ice-9/boot-9.scm:
> 2401: 14 [save-module-excursion #<procedure 19c4940 at ice-9/boot-9.scm:4045:3 ()>]
> 4050: 13 [#<procedure 19c4940 at ice-9/boot-9.scm:4045:3 ()>]
> 1724: 12 [%start-stack load-stack ...]
> 1729: 11 [#<procedure 19dbea0 ()>]
> In unknown file:
> ?: 10 [primitive-load "/home/rekado/dev/guix/scripts/guix"]
> In guix/ui.scm:
> 1177: 9 [run-guix-command build "-S" "xfce"]
> In ice-9/boot-9.scm:
> 157: 8 [catch srfi-34 #<procedure 205a080 at guix/ui.scm:413:2 ()> ...]
> 157: 7 [catch system-error ...]
> In guix/scripts/build.scm:
> 638: 6 [#<procedure 205a120 at guix/scripts/build.scm:634:2 ()>]
> 591: 5 [options->derivations #<build-daemon 256.15 280efc0> (# # # # ...)]
> In srfi/srfi-1.scm:
> 646: 4 [append-map #<procedure 280ebc0 at guix/scripts/build.scm:591:16 (expr)> #]
> 578: 3 [map #<procedure 280ebc0 at guix/scripts/build.scm:591:16 (expr)> (#)]
> In guix/scripts/build.scm:
> 598: 2 [#<procedure 280ebc0 at guix/scripts/build.scm:591:16 (expr)> #]
> In guix/store.scm:
> 1017: 1 [#<procedure 206fbe0 at guix/store.scm:1016:26 (store . args)> # #f]
> In guix/packages.scm:
> 1073: 0 [origin->derivation #f "x86_64-linux"]
>
> guix/packages.scm:1073:2: In procedure origin->derivation:
> guix/packages.scm:1073:2: Throw to key `match-error' with args `("match" "no matching pattern" #f)'.
> ~~~~~~~~~~~~~~~~~~~~~~~
>
> That’s expected, because the “xfce” package is a meta-package and thus
> does not have any sources of its own. The “source” field is “#f”.
Fixed in 8a54c0ec694ad6e22b155d167552b8fd0914e82d.
I made it a warning so that one can still use things like:
guix build -S `guix package -A | cut -f1`
Thanks!
Ludo’.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-09-27 9:48 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-02-28 10:58 bug#22836: “guix build -S” fails when “source” is #f Ricardo Wurmus
2016-09-27 9:47 ` Ludovic Courtès
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).