* bug#34484: GCL: segfault on invocation on x86_64 and i686
@ 2019-02-15 8:29 Diego Nicola Barbato
2019-03-11 22:50 ` Diego Nicola Barbato
2019-09-27 7:00 ` Diego Nicola Barbato
0 siblings, 2 replies; 3+ messages in thread
From: Diego Nicola Barbato @ 2019-02-15 8:29 UTC (permalink / raw)
To: 34484
Hello Guix,
GCL segfaults upon execution on x86_64 and i686. This is most likely
the reason why Maxima fails to build on those architectures [0] [1].
This is what I tried:
--8<---------------cut here---------------start------------->8---
diego@GLaDOS ~$ guix build gcl
/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2
diego@GLaDOS ~$ /gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2/bin/gcl
Speicherzugriffsfehler
diego@GLaDOS ~$ guix build -s i686-linux gcl
/gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2
diego@GLaDOS ~$ /gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2/bin/gcl
Speicherzugriffsfehler
--8<---------------cut here---------------end--------------->8---
I also tried building GCL locally to check if this was something
non-deterministic with the same result:
--8<---------------cut here---------------start------------->8---
diego@GLaDOS ~$ guix build gcl --check --keep-failed
[...]
phase `compress-documentation' succeeded after 0.1 seconds
note: keeping build directory `/tmp/guix-build-gcl-2.6.12-2.d3335e2.drv-4'
guix build: error: derivation `/gnu/store/kljywjw5a3wpcqk67p1isrrgy5yxgp21-gcl-2.6.12-2.d3335e2.drv' may not be deterministic: output `/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2' differs from ‘/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2-check’
diego@GLaDOS ~$ /gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2-check/bin/gcl
Speicherzugriffsfehler
diego@GLaDOS ~$ guix build gcl -s i686-linux --check --keep-failed
[...]
phase `compress-documentation' succeeded after 0.1 seconds
note: keeping build directory `/tmp/guix-build-gcl-2.6.12-2.d3335e2.drv-3'
guix build: error: derivation `/gnu/store/p7r9c9kqf4gafik0a3q9fl0ry8hks99f-gcl-2.6.12-2.d3335e2.drv' may not be deterministic: output `/gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2' differs from ‘/gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2-check’
diego@GLaDOS ~$ /gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2-check/bin/gcl
Speicherzugriffsfehler
--8<---------------cut here---------------end--------------->8---
GCL works fine on armhf (I did not try it on aarch64).
I run Guix System (commit: 571a01d) on x86_64.
Regards,
Diego
[0]: https://berlin.guixsd.org/build/943168 (x86_64)
[1]: https://berlin.guixsd.org/build/943189 (i686)
^ permalink raw reply [flat|nested] 3+ messages in thread
* bug#34484: GCL: segfault on invocation on x86_64 and i686
2019-02-15 8:29 bug#34484: GCL: segfault on invocation on x86_64 and i686 Diego Nicola Barbato
@ 2019-03-11 22:50 ` Diego Nicola Barbato
2019-09-27 7:00 ` Diego Nicola Barbato
1 sibling, 0 replies; 3+ messages in thread
From: Diego Nicola Barbato @ 2019-03-11 22:50 UTC (permalink / raw)
To: 34484
Diego Nicola Barbato <dnbarbato@posteo.de> writes:
> Hello Guix,
>
> GCL segfaults upon execution on x86_64 and i686. This is most likely
> the reason why Maxima fails to build on those architectures [0] [1].
>
> This is what I tried:
>
>
> diego@GLaDOS ~$ guix build gcl
> /gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2
> diego@GLaDOS ~$ /gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2/bin/gcl
> Speicherzugriffsfehler
> diego@GLaDOS ~$ guix build -s i686-linux gcl
> /gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2
> diego@GLaDOS ~$ /gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2/bin/gcl
> Speicherzugriffsfehler
>
>
> I also tried building GCL locally to check if this was something
> non-deterministic with the same result:
>
>
> diego@GLaDOS ~$ guix build gcl --check --keep-failed
>
> [...]
>
> phase `compress-documentation' succeeded after 0.1 seconds
> note: keeping build directory `/tmp/guix-build-gcl-2.6.12-2.d3335e2.drv-4'
> guix build: error: derivation `/gnu/store/kljywjw5a3wpcqk67p1isrrgy5yxgp21-gcl-2.6.12-2.d3335e2.drv' may not be deterministic: output `/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2' differs from ‘/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2-check’
> diego@GLaDOS ~$ /gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2-check/bin/gcl
> Speicherzugriffsfehler
> diego@GLaDOS ~$ guix build gcl -s i686-linux --check --keep-failed
>
> [...]
>
> phase `compress-documentation' succeeded after 0.1 seconds
> note: keeping build directory `/tmp/guix-build-gcl-2.6.12-2.d3335e2.drv-3'
> guix build: error: derivation `/gnu/store/p7r9c9kqf4gafik0a3q9fl0ry8hks99f-gcl-2.6.12-2.d3335e2.drv' may not be deterministic: output `/gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2' differs from ‘/gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2-check’
> diego@GLaDOS ~$ /gnu/store/cbw0k4apa6qiqfm7g9j0lzfbzfk6mxj2-gcl-2.6.12-2.d3335e2-check/bin/gcl
> Speicherzugriffsfehler
>
> GCL works fine on armhf (I did not try it on aarch64).
>
> I run Guix System (commit: 571a01d) on x86_64.
>
> Regards,
>
> Diego
>
>
> [0]: https://berlin.guixsd.org/build/943168 (x86_64)
> [1]: https://berlin.guixsd.org/build/943189 (i686)
Some additional information:
GCL does not segfault if I get the substitute from hydra (where Maxima
builds successfully). It does segfault (on the aforementioned
architectures) if I get the substitute from berlin (where Maxima fails
to build) and if I build it locally.
Here is what I have tried (I get the same results when passing
‘--system=i686-linux’ to the build commands):
--8<---------------cut here---------------start------------->8---
diego@GLaDOS ~$ guix gc --delete $(guix gc --list-dead |grep gcl-2)
[...]
diego@GLaDOS ~$ $(guix build --substitute-urls=https://mirror.hydra.gnu.org gcl)/bin/gcl
7.1 MB werden heruntergeladen:
/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2
Substituiere /gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2 …
Lade von https://mirror.hydra.gnu.org/guix/nar/gzip/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2 herunter …
gcl-2.6.12-2.d3335e2 6.8MiB 2.7MiB/s 00:03 [##################] 100.0%
GCL (GNU Common Lisp) 2.6.12 ANSI Fri Apr 22 15:51:11 UTC 2016
Source License: LGPL(gcl,gmp), GPL(unexec,bfd,xgcl)
Binary License: GPL due to GPL'ed components: (READLINE UNEXEC)
Modifications of this banner must retain notice of a compatible license
Dedicated to the memory of W. Schelter
Use (help) to get some basic information on how to use GCL.
Temporary directory for compiler files:
/tmp/
>
--8<---------------cut here---------------end--------------->8---
--8<---------------cut here---------------start------------->8---
diego@GLaDOS ~$ guix gc --delete $(guix gc --list-dead |grep gcl-2)
[...]
diego@GLaDOS ~$ $(guix build --substitute-urls=https://berlin.guixsd.org gcl)/bin/gcl
7.1 MB werden heruntergeladen:
/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2
Substituiere /gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2 …
Lade von https://berlin.guixsd.org/nar/gzip/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2 herunter …
gcl-2.6.12-2.d3335e2 6.7MiB 2.4MiB/s 00:03 [##################] 100.0%
Speicherzugriffsfehler
--8<---------------cut here---------------end--------------->8---
--8<---------------cut here---------------start------------->8---
diego@GLaDOS ~$ guix gc --delete $(guix gc --list-dead |grep gcl-2)
[...]
diego@GLaDOS ~$ guix build --check --keep-failed gcl
[...]
guix build: error: derivation `/gnu/store/k5ygbl35phqr31bbnmkhsay4akw7l9ja-gcl-2.6.12-2.d3335e2.drv' may not be deterministic: output `/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2' differs from ‘/gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2-check’
diego@GLaDOS ~$ /gnu/store/5zzfw856c1acrmalsdznm1093mkvnwls-gcl-2.6.12-2.d3335e2-check/bin/gcl
Speicherzugriffsfehler
--8<---------------cut here---------------end--------------->8---
I have built GCL locally a couple of times and it always segfaults.
My Guix is currently on commit 0bd1498.
Regards,
Diego
^ permalink raw reply [flat|nested] 3+ messages in thread
* bug#34484: GCL: segfault on invocation on x86_64 and i686
2019-02-15 8:29 bug#34484: GCL: segfault on invocation on x86_64 and i686 Diego Nicola Barbato
2019-03-11 22:50 ` Diego Nicola Barbato
@ 2019-09-27 7:00 ` Diego Nicola Barbato
1 sibling, 0 replies; 3+ messages in thread
From: Diego Nicola Barbato @ 2019-09-27 7:00 UTC (permalink / raw)
To: 34484-done
Hi Guix,
I'm closing this bug since it has been fixed a while ago as a side
effect of … something. I don't know how it was fixed or even if it was
fixed on purpose, but I'm glad it's gone.
Regards,
Diego
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-27 7:01 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-15 8:29 bug#34484: GCL: segfault on invocation on x86_64 and i686 Diego Nicola Barbato
2019-03-11 22:50 ` Diego Nicola Barbato
2019-09-27 7:00 ` Diego Nicola Barbato
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).