* bug#24789: Changing console renders my system unresponsive
@ 2016-10-25 11:22 Petter
2016-10-26 12:30 ` Ludovic Courtès
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Petter @ 2016-10-25 11:22 UTC (permalink / raw)
To: 24789
[-- Attachment #1: Type: text/plain, Size: 4317 bytes --]
Hi,
I'm having a pretty dramatic experience changing console, f.ex.
Ctrl+Alt+F4. My system becomes completely unresponsive. Even
Alt+SysRq+reisub is unable to persuade my system to perform a gentlemans
reboot. To recover I must do a hard reboot.
Bringing this up in #guix suggests it's not a common issue.
My setup is:
Libreboot X200
Docking station
External monitor connected to the docking station with DisplayPort.
XFCE
GuixSD (from git, last commit in my repo
c11933c920dd7b7cdf68e13e6b3718602129210a)
Using DisplayPort I sometimes get the attached output. Other times I get
a white underscore in the top left corner on a black background.
Now, if I change video output to Laptop monitor and unplug the
DisplayPort cable I can change consoles. (Only setting video output to
Laptop is not enough, the cable must go.)
If I use VGA instead, changing consoles seems to work fine. However
running command "dmesg" tells of a Call Trace that looks much like the
Call Trace I sometimes see when my system becomes unresponsive
(attached), though a bit shorter.
---This is dmesg after changing consoles with VGA:---
[18562.847011] WARNING: CPU: 0 PID: 358 at
drivers/gpu/drm/i915/intel_display.c:13094 intel_atomic_c
ommit_tail+0xec9/0x11b0 [i915]
[18562.847013] pipe state doesn't match!
[18562.847014] Modules linked in: appletalk ax25 ipx p8023 p8022 psnap
llc iTCO_wdt iTCO_vendor_supp
ort snd_hda_codec_conexant snd_hda_codec_generic arc4 coretemp kvm_intel
kvm irqbypass ath9k i915 ps
mouse drm_kms_helper ath9k_common serio_raw ath9k_hw ath mac80211
i2c_i801 uvcvideo drm i2c_smbus sn
d_hda_intel videobuf2_vmalloc videobuf2_memops snd_hda_codec
videobuf2_v4l2 joydev lpc_ich thinkpad_
acpi snd_hda_core i2c_algo_bit fb_sys_fops syscopyarea videobuf2_core
sysfillrect input_leds snd_hwd
ep cfg80211 sysimgblt videodev snd_pcm usbkbd media nvram usbmouse
snd_timer e1000e snd soundcore pt
p shpchp fjes video pps_core mac_hid virtio_console virtio_net
virtio_blk virtio_balloon virtio_pci
virtio virtio_ring isci libsas scsi_transport_sas pata_atiixp pata_acpi
nvme nvme_core wp512 serpent
_generic xts
[18562.847065] gf128mul dm_crypt hid_apple hid_generic usbhid hid uas
usb_storage ahci libahci [las
t unloaded: pcspkr]
[18562.847076] CPU: 0 PID: 358 Comm: X Tainted: G W I
4.8.2-gnu #1
[18562.847078] Hardware name: LENOVO 7458WLD/7458WLD, BIOS CBET4000 4.0
05/18/2015
[18562.847080] 0000000000000286 000000003943eb96 ffff995f6d297a70
ffffffffa53ede43
[18562.847084] ffff995f6d297ac0 0000000000000000 ffff995f6d297ab0
ffffffffa50831e1
[18562.847087] 00003326c089ec22 ffff995f6cd11800 ffff995f6d0d4000
ffff995f6cd10800
[18562.847090] Call Trace:
[18562.847097] [<ffffffffa53ede43>] dump_stack+0x63/0x90
[18562.847101] [<ffffffffa50831e1>] __warn+0xd1/0xf0
[18562.847103] [<ffffffffa508325f>] warn_slowpath_fmt+0x5f/0x80
[18562.847130] [<ffffffffc08ab7d9>]
intel_atomic_commit_tail+0xec9/0x11b0 [i915]
[18562.847133] [<ffffffffa50c7840>] ? wait_woken+0x80/0x80
[18562.847159] [<ffffffffc08abec7>] intel_atomic_commit+0x407/0x570
[i915]
[18562.847191] [<ffffffffc060f161>] ? drm_atomic_check_only+0x141/0x640
[drm]
[18562.847206] [<ffffffffc060fcf7>] ?
drm_atomic_set_crtc_for_connector+0x97/0x100 [drm]
[18562.847221] [<ffffffffc060f697>] drm_atomic_commit+0x37/0x60 [drm]
[18562.847234] [<ffffffffc07fbc22>]
drm_atomic_helper_set_config+0x82/0xc0 [drm_kms_helper]
[18562.847248] [<ffffffffc05fdfc5>]
drm_mode_set_config_internal+0x65/0x110 [drm]
[18562.847262] [<ffffffffc060279c>] drm_mode_setcrtc+0x1ec/0x580 [drm]
[18562.847274] [<ffffffffc05f5132>] drm_ioctl+0x202/0x510 [drm]
[18562.847288] [<ffffffffc06025b0>] ? drm_mode_setplane+0x1c0/0x1c0
[drm]
[18562.847292] [<ffffffffa522bb27>] ? __vfs_read+0x37/0x150
[18562.847295] [<ffffffffa5240cef>] do_vfs_ioctl+0x9f/0x5e0
[18562.847299] [<ffffffffa5091211>] ? __set_task_blocked+0x41/0xa0
[18562.847301] [<ffffffffa5093b66>] ? __set_current_blocked+0x36/0x60
[18562.847304] [<ffffffffa52412a9>] SyS_ioctl+0x79/0x90
[18562.847307] [<ffffffffa5847d36>] entry_SYSCALL_64_fastpath+0x1e/0xa8
[18562.847309] ---[ end trace f68728a0d3053b57 ]---
I have no idea if this is really a Guix issue or not, maybe it's
Linux-libre?
Let me know if I can be of any assistance.
--
Petter
#guix Petter
[-- Attachment #2: IMG_1126-small.JPG --]
[-- Type: image/jpeg, Size: 255816 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#24789: Changing console renders my system unresponsive
2016-10-25 11:22 bug#24789: Changing console renders my system unresponsive Petter
@ 2016-10-26 12:30 ` Ludovic Courtès
2016-10-27 8:59 ` Petter
2020-02-18 14:14 ` bug#24789: Hunting#24789: " zimoun
2020-05-12 23:38 ` bug#24789: closing #24789 zimoun
2 siblings, 1 reply; 6+ messages in thread
From: Ludovic Courtès @ 2016-10-26 12:30 UTC (permalink / raw)
To: Petter; +Cc: 24789
Petter <petter@mykolab.ch> skribis:
> I'm having a pretty dramatic experience changing console,
> f.ex. Ctrl+Alt+F4. My system becomes completely unresponsive. Even
> Alt+SysRq+reisub is unable to persuade my system to perform a
> gentlemans reboot. To recover I must do a hard reboot.
>
> Bringing this up in #guix suggests it's not a common issue.
>
> My setup is:
> Libreboot X200
> Docking station
> External monitor connected to the docking station with DisplayPort.
> XFCE
> GuixSD (from git, last commit in my repo
> c11933c920dd7b7cdf68e13e6b3718602129210a)
[...]
> I have no idea if this is really a Guix issue or not, maybe it's
> Linux-libre?
I definitely don’t experience that on my laptop (not an X200). Perhaps
the KMS module and Xorg driver is at fault? Which ones are in use?
(My laptop has an Intel graphics card, so i915.ko, though for some
reason Xorg uses xf86-video-intel instead of “modesetting”.)
Ludo’.
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#24789: Changing console renders my system unresponsive
2016-10-26 12:30 ` Ludovic Courtès
@ 2016-10-27 8:59 ` Petter
2016-10-27 11:55 ` Ludovic Courtès
0 siblings, 1 reply; 6+ messages in thread
From: Petter @ 2016-10-27 8:59 UTC (permalink / raw)
To: ludo; +Cc: 24789
Did you try using an external monitor connected with DisplayPort?
KMS Module in use (from /var/log/Xorg.0.log):
[ 18.862] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20160711
As for Xorg driver in use, I'm not sure where or how to find this out.
Grepping /var/log/Xorg.0.log for LoadModule in case that's helpful. If
not, let me know how I can find it.
58:[ 18.637] (II) LoadModule: "glx"
70:[ 18.725] (II) LoadModule: "intel"
76:[ 18.747] (II) LoadModule: "modesetting"
82:[ 18.762] (II) LoadModule: "fbdev"
88:[ 18.771] (II) LoadModule: "vesa"
109:[ 18.864] (II) LoadModule: "fbdevhw"
145:[ 18.885] (II) LoadModule: "dri2"
148:[ 18.885] (II) LoadModule: "present"
190:[ 19.050] (II) LoadModule: "libinput"
--
Petter
On 2016-10-26 14:30, ludo@gnu.org wrote:
> Petter <petter@mykolab.ch> skribis:
>
>> I'm having a pretty dramatic experience changing console,
>> f.ex. Ctrl+Alt+F4. My system becomes completely unresponsive. Even
>> Alt+SysRq+reisub is unable to persuade my system to perform a
>> gentlemans reboot. To recover I must do a hard reboot.
>>
>> Bringing this up in #guix suggests it's not a common issue.
>>
>> My setup is:
>> Libreboot X200
>> Docking station
>> External monitor connected to the docking station with DisplayPort.
>> XFCE
>> GuixSD (from git, last commit in my repo
>> c11933c920dd7b7cdf68e13e6b3718602129210a)
>
> [...]
>
>> I have no idea if this is really a Guix issue or not, maybe it's
>> Linux-libre?
>
> I definitely don’t experience that on my laptop (not an X200). Perhaps
> the KMS module and Xorg driver is at fault? Which ones are in use?
>
> (My laptop has an Intel graphics card, so i915.ko, though for some
> reason Xorg uses xf86-video-intel instead of “modesetting”.)
>
> Ludo’.
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#24789: Changing console renders my system unresponsive
2016-10-27 8:59 ` Petter
@ 2016-10-27 11:55 ` Ludovic Courtès
0 siblings, 0 replies; 6+ messages in thread
From: Ludovic Courtès @ 2016-10-27 11:55 UTC (permalink / raw)
To: Petter; +Cc: 24789
Petter <petter@mykolab.ch> skribis:
> Did you try using an external monitor connected with DisplayPort?
No, I only tried VGA and HDMI outputs, which work fine.
> KMS Module in use (from /var/log/Xorg.0.log):
> [ 18.862] (II) intel(0): Using Kernel Mode Setting driver: i915,
> version 1.6.0 20160711
>
> As for Xorg driver in use, I'm not sure where or how to find this out.
>
> Grepping /var/log/Xorg.0.log for LoadModule in case that's helpful. If
> not, let me know how I can find it.
> 58:[ 18.637] (II) LoadModule: "glx"
> 70:[ 18.725] (II) LoadModule: "intel"
> 76:[ 18.747] (II) LoadModule: "modesetting"
> 82:[ 18.762] (II) LoadModule: "fbdev"
> 88:[ 18.771] (II) LoadModule: "vesa"
> 109:[ 18.864] (II) LoadModule: "fbdevhw"
> 145:[ 18.885] (II) LoadModule: "dri2"
> 148:[ 18.885] (II) LoadModule: "present"
> 190:[ 19.050] (II) LoadModule: "libinput"
OK.
Could you check maybe whether other X200 users have that problem? It
doesn’t seem to be GuixSD-specific.
Did you have success with another distro on this laptop? If so, it
would be good to see the difference in terms of drivers and versions.
Ludo’.
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#24789: Hunting#24789: Changing console renders my system unresponsive
2016-10-25 11:22 bug#24789: Changing console renders my system unresponsive Petter
2016-10-26 12:30 ` Ludovic Courtès
@ 2020-02-18 14:14 ` zimoun
2020-05-12 23:38 ` bug#24789: closing #24789 zimoun
2 siblings, 0 replies; 6+ messages in thread
From: zimoun @ 2020-02-18 14:14 UTC (permalink / raw)
To: 24789, petter
Dear,
The bug #24789 [1] is a bit old.
What is the status? Do you still have this unexpected behaviour?
[1] https://debbugs.gnu.org/cgi/bugreport.cgi?bug=24789
All the best,
simon
^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#24789: closing #24789
2016-10-25 11:22 bug#24789: Changing console renders my system unresponsive Petter
2016-10-26 12:30 ` Ludovic Courtès
2020-02-18 14:14 ` bug#24789: Hunting#24789: " zimoun
@ 2020-05-12 23:38 ` zimoun
2 siblings, 0 replies; 6+ messages in thread
From: zimoun @ 2020-05-12 23:38 UTC (permalink / raw)
To: 24789-done, petter, Ludovic Courtès
Dear,
Because this bug is more than 3 years old, tagged moreinfo and without
any answer by the submitter since 12 weeks, I am closing.
Best regards,
simon
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-05-12 23:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-25 11:22 bug#24789: Changing console renders my system unresponsive Petter
2016-10-26 12:30 ` Ludovic Courtès
2016-10-27 8:59 ` Petter
2016-10-27 11:55 ` Ludovic Courtès
2020-02-18 14:14 ` bug#24789: Hunting#24789: " zimoun
2020-05-12 23:38 ` bug#24789: closing #24789 zimoun
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).