* bug#64774: RISC-V 64 Python 3.10.7 build failure when building git 2.41.0 @ commit eb12f3f
@ 2023-07-21 19:06 Juliana Sims
2023-09-20 6:49 ` Simon Tournier
0 siblings, 1 reply; 2+ messages in thread
From: Juliana Sims @ 2023-07-21 19:06 UTC (permalink / raw)
To: 64774
[-- Attachment #1.1: Type: text/plain, Size: 738 bytes --]
Hello,
The command `guix shell -s riscv64-linux -Kc $(($(nproc)/2)) git` fails
due to test failures while building Python 3.10.7. Notably, creating a
shell with just Python (so, swapping "python" for "git" in the command)
works fine.
Here is my channel information:
```
(channel
(name 'guix)
(url "<https://git.savannah.gnu.org/git/guix.git>")
(branch "master")
(commit
"eb12f3fd8bee99920118ec802ffbac8f1ab676b9")
(introduction
(make-channel-introduction
"9edb3f66fd807b096b48283debdcddccfea34bad"
(openpgp-fingerprint
"BBB0 2DDF 2CEA F6A8 0D1D E643 A2A0 6DF2 A33A 54FA"))))
```
I have attached the build log as well.
Thanks,
Juli
[-- Attachment #1.2: Type: text/html, Size: 1262 bytes --]
[-- Attachment #2: ihv7x816k38gkknnkaj9pdrxivrqcz-python-3.10.7.drv.gz --]
[-- Type: application/gzip, Size: 65375 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* bug#64774: RISC-V 64 Python 3.10.7 build failure when building git 2.41.0 @ commit eb12f3f
2023-07-21 19:06 bug#64774: RISC-V 64 Python 3.10.7 build failure when building git 2.41.0 @ commit eb12f3f Juliana Sims
@ 2023-09-20 6:49 ` Simon Tournier
0 siblings, 0 replies; 2+ messages in thread
From: Simon Tournier @ 2023-09-20 6:49 UTC (permalink / raw)
To: Juliana Sims, 64774
Hi,
On Fri, 21 Jul 2023 at 15:06, Juliana Sims <juli@incana.org> wrote:
> The command `guix shell -s riscv64-linux -Kc $(($(nproc)/2)) git` fails
> due to test failures while building Python 3.10.7. Notably, creating a
> shell with just Python (so, swapping "python" for "git" in the command)
> works fine.
[...]
> (commit
> "eb12f3fd8bee99920118ec802ffbac8f1ab676b9")
On my machine running x86_64, it fails about
/gnu/store/…-python-toolchain-3.10.7.drv with,
--8<---------------cut here---------------start------------->8---
@ unsupported-platform
/gnu/store/5sxjc5i6cnk9fgxv9vxh7736vvg46z1x-python-toolchain-3.10.7.drv
riscv64-linux
while setting up the build environment: a `riscv64-linux' is required to
build `/gnu/store/5sxjc5i6cnk9fgxv9vxh7736vvg46z1x-python-toolchain-3.10.7.drv',but I am a `x86_64-linux'
--8<---------------cut here---------------end--------------->8---
If I run,
$ guix time-machine -q --commit=eb12f3fd8bee99920118ec802ffbac8f1ab676b9 \
-- build -s riscv64-linux git --no-grafts -d
/gnu/store/416hn85wavavmbhrfgrshq5fvvjgxnb2-git-2.41.0.drv
Then I open the derivation, I read:
,("/gnu/store/bwkklzsf4hrrmwqsy50837zyrl86bhm0-python-3.10.7.drv",["out"])
And this is substituted for me. This python-toolchain is dragged by
this chain:
--8<---------------cut here---------------start------------->8---
$ guix time-machine -q --commit=eb12f3fd8bee99920118ec802ffbac8f1ab676b9 \
-- graph --path -s riscv64-linux -t derivation \
/gnu/store/416hn85wavavmbhrfgrshq5fvvjgxnb2-git-2.41.0.drv \
/gnu/store/5sxjc5i6cnk9fgxv9vxh7736vvg46z1x-python-toolchain-3.10.7.drv
/gnu/store/416hn85wavavmbhrfgrshq5fvvjgxnb2-git-2.41.0.drv
/gnu/store/bpn15j7zp90pxmjfhjb8byjnp95ymd7z-libsecret-0.20.5.drv
/gnu/store/h8ndn2j5vczzj6rph42ph3j5k87cy9xm-python-pygobject-3.42.2.drv
/gnu/store/6ghdpirfri9avcvm9617zgqv169hkphl-python-tomli-2.0.1.drv
/gnu/store/5sxjc5i6cnk9fgxv9vxh7736vvg46z1x-python-toolchain-3.10.7.drv
--8<---------------cut here---------------end--------------->8---
Well, this python-toolchain depends on
/gnu/store/7rihv7x816k38gkknnkaj9pdrxivrqcz-python-3.10.7.drv which is
substituted for me.
If I read correctly, you reported
/gnu/store/ihv7x816k38gkknnkaj9pdrxivrqcz-python-3.10.7.drv.gz for the
name of the derivations which failed for you. But I do not see it,
--8<---------------cut here---------------start------------->8---
$ guix time-machine -q --commit=eb12f3fd8bee99920118ec802ffbac8f1ab676b9\
-- graph -s riscv64-linux -t derivation git \
| grep label | grep python-3.10 \
| cut -f1 -d'['
"/gnu/store/bwkklzsf4hrrmwqsy50837zyrl86bhm0-python-3.10.7.drv"
"/gnu/store/mb4l6l8q8s4b1lknxsr3zsd8i6scgf61-python-3.10.7-builder"
"/gnu/store/7rihv7x816k38gkknnkaj9pdrxivrqcz-python-3.10.7.drv"
"/gnu/store/5i55gbh89dfmk6n1qcz3fn2h14hg38pv-python-3.10.7-builder"
--8<---------------cut here---------------end--------------->8---
Hum, I do not know where does come from the Python which fails for you?
Cheers,
simon
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2023-09-20 7:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-07-21 19:06 bug#64774: RISC-V 64 Python 3.10.7 build failure when building git 2.41.0 @ commit eb12f3f Juliana Sims
2023-09-20 6:49 ` Simon Tournier
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).