* bug#37160: guix lint --checkers=refresh fails
@ 2019-08-23 14:45 Jonathan Brielmaier
2019-08-27 9:44 ` Ludovic Courtès
0 siblings, 1 reply; 8+ messages in thread
From: Jonathan Brielmaier @ 2019-08-23 14:45 UTC (permalink / raw)
To: 37160
During testing various guix commands on openSUSE Tumbleweed with the
openSUSE package, I found a strange error. This happens with guix 1.0.1
and d78bc23411 as openSUSE packages.
Steps to reproduce:
* Install Tumbleweed
$ sudo zypper install guix
$ sudo systemctl start guix-daemon
$ guix install nss-certs
$ export
SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
$ export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
$ guix lint --checkers=refresh hello
Backtrace:ello@2.10 [refresh]...
8 (apply-smob/1 #<catch-closure 7f611c41c7c0>)
In ice-9/boot-9.scm:
705:2 7 (call-with-prompt _ _ #<procedure default-prompt-handle…>)
In ice-9/eval.scm:
619:8 6 (_ #(#(#<directory (guile-user) 7f611c43b140>)))
In guix/ui.scm:
1747:12 5 (run-guix-command _ . _)
In srfi/srfi-1.scm:
640:9 4 (for-each #<procedure 7f611af598e0 at guix/scripts/lin…> …)
In guix/scripts/lint.scm:
1152:4 3 (run-checkers #<package hello@2.10 gnu/packages/base.s…> …)
In srfi/srfi-1.scm:
640:9 2 (for-each #<procedure 7f6110857820 at guix/scripts/lin…> …)
In guix/scripts/lint.scm:
954:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
In ice-9/boot-9.scm:
829:9 0 (catch srfi-34 #<procedure 7f611074a3c0 at guix/script…> …)
ice-9/boot-9.scm:829:9: In procedure catch:
Wrong type to apply: #f
Error does not occur when:
* guix is installed via the installer script 1.0.1
* guix is installed via the installer script and guix pulled to current
master
* package source doesn't gome from gnu mirror like 0xffff (github),
mate-system-monitor, dconf-editor...
The only difference I can see between guix binary and openSUSE's guix is
the first uses guile 2.2.4 and the second guile 2.2.6 (from Tumbleweed).
Some backtrace from guix repl:
scheme@(guix-user)> (use-modules (guix scripts lint))
scheme@(guix-user)> (guix-lint "--checkers=refresh" "hello")
ice-9/boot-9.scm:829:9: In procedure catch:
Wrong type to apply: #f
Entering a new prompt. Type `,bt' for a backtrace or `,q' to continue.
scheme@(guix-user) [1]> ,bt
In srfi/srfi-1.scm:
640:9 4 (for-each #<procedure 7fb9c718a560 at guix/scripts/lin…> …)
In guix/scripts/lint.scm:
1152:4 3 (run-checkers #<package hello@2.10 gnu/packages/base.s…> …)
In srfi/srfi-1.scm:
640:9 2 (for-each #<procedure 7fb9ba623b00 at guix/scripts/lin…> …)
In guix/scripts/lint.scm:
954:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
In ice-9/boot-9.scm:
829:9 0 (catch srfi-34 #<procedure 7fb9bd5321e0 at guix/script…> …)
scheme@(guix-user) [1]> ,locals
Local variables:
$1 = k = srfi-34
$2 = thunk = #<procedure 7fb9bd5321e0 at guix/scripts/lint.scm:880:2…>
$3 = handler = #<procedure 7fb9ba623740 at guix/scripts/lint.scm:880…>
$4 = #f = #<thread-local-fluid 7fb9cb21d750>
scheme@(guix-user) [1]> ,up
In guix/scripts/lint.scm:
954:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
scheme@(guix-user) [1]> ,locals
Local variables:
$5 = package = #<package hello@2.10 gnu/packages/base.scm:72 7fb9bce…>
$6 = arg = #<procedure call-with-networking-fail-safe (message error…>
$7 = box = #<variable 7fb9caecbd60 value: #<procedure 7fb9caec8ac0 a…>
$8 = arg = #<procedure 7fb9caec8ac0 at ice-9/format.scm:1609:9 (dest…>
$9 = arg = #f
$10 = box = #<variable 7fb9cae898c0 value: #<procedure G_ (t-13c8acc…>
$11 = tmp = "while retrieving upstream info for '~a'"
$12 = arg = #<record-type <package>>
$13 = box = #<variable 7fb9c9de61d0 value: #<record-type <package>>>
scheme@(guix-user) [1]> ,up
In srfi/srfi-1.scm:
640:9 2 (for-each #<procedure 7fb9ba623b00 at guix/scripts/lin…> …)
scheme@(guix-user) [1]> ,locals
Local variables:
$19 = f = #<procedure 7fb9ba623b00 at guix/scripts/lint.scm:1152:14 …>
$20 = l = (#<<lint-checker> name: refresh description: "Check the p…>)
To be honest I'm a bit lost here. If you have any ideas how to debug
this, please let my know.
Kind Regards
Jonathan
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#37160: guix lint --checkers=refresh fails
2019-08-23 14:45 bug#37160: guix lint --checkers=refresh fails Jonathan Brielmaier
@ 2019-08-27 9:44 ` Ludovic Courtès
2019-08-27 10:27 ` Jonathan Brielmaier
2019-08-27 10:29 ` quiliro
0 siblings, 2 replies; 8+ messages in thread
From: Ludovic Courtès @ 2019-08-27 9:44 UTC (permalink / raw)
To: Jonathan Brielmaier; +Cc: 37160
Hi Jonathan,
Jonathan Brielmaier <jonathan.brielmaier@web.de> skribis:
> During testing various guix commands on openSUSE Tumbleweed with the
> openSUSE package, I found a strange error. This happens with guix 1.0.1
> and d78bc23411 as openSUSE packages.
I cannot reproduce it on current master, on Guix System.
> Steps to reproduce:
> * Install Tumbleweed
> $ sudo zypper install guix
> $ sudo systemctl start guix-daemon
> $ guix install nss-certs
> $ export
> SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
> $ export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
> $ guix lint --checkers=refresh hello
> Backtrace:ello@2.10 [refresh]...
> 8 (apply-smob/1 #<catch-closure 7f611c41c7c0>)
> In ice-9/boot-9.scm:
> 705:2 7 (call-with-prompt _ _ #<procedure default-prompt-handle…>)
> In ice-9/eval.scm:
> 619:8 6 (_ #(#(#<directory (guile-user) 7f611c43b140>)))
> In guix/ui.scm:
> 1747:12 5 (run-guix-command _ . _)
> In srfi/srfi-1.scm:
> 640:9 4 (for-each #<procedure 7f611af598e0 at guix/scripts/lin…> …)
> In guix/scripts/lint.scm:
> 1152:4 3 (run-checkers #<package hello@2.10 gnu/packages/base.s…> …)
> In srfi/srfi-1.scm:
> 640:9 2 (for-each #<procedure 7f6110857820 at guix/scripts/lin…> …)
> In guix/scripts/lint.scm:
> 954:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
> In ice-9/boot-9.scm:
> 829:9 0 (catch srfi-34 #<procedure 7f611074a3c0 at guix/script…> …)
>
> ice-9/boot-9.scm:829:9: In procedure catch:
> Wrong type to apply: #f
This backtrace is not from current master (there’s now a new (guix lint)
module.) Could you post the backtrace for master?
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#37160: guix lint --checkers=refresh fails
2019-08-27 9:44 ` Ludovic Courtès
@ 2019-08-27 10:27 ` Jonathan Brielmaier
2019-08-27 22:33 ` Ludovic Courtès
2019-08-27 10:29 ` quiliro
1 sibling, 1 reply; 8+ messages in thread
From: Jonathan Brielmaier @ 2019-08-27 10:27 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 37160
On 27.08.19 11:44, Ludovic Courtès wrote:
> This backtrace is not from current master (there’s now a new (guix lint)
> module.) Could you post the backtrace for master?
Backtrace on master (d78bc23411):
guix lint --checkers=refresh hello
Backtrace:ello@2.10 [refresh]...
9 (apply-smob/1 #<catch-closure 7fcdabc0a560>)
In ice-9/boot-9.scm:
705:2 8 (call-with-prompt _ _ #<procedure default-prompt-handle…>)
In ice-9/eval.scm:
619:8 7 (_ #(#(#<directory (guile-user) 7fcdabcb9140>)))
In guix/ui.scm:
1692:12 6 (run-guix-command _ . _)
In srfi/srfi-1.scm:
640:9 5 (for-each #<procedure 7fcdaa7e9500 at guix/scripts/lin…> …)
In guix/scripts/lint.scm:
57:4 4 (run-checkers #<package hello@2.10 gnu/packages/base.s…> …)
In srfi/srfi-1.scm:
640:9 3 (for-each #<procedure 7fcd9e787ba0 at guix/scripts/lin…> …)
In guix/scripts/lint.scm:
64:17 2 (_ _)
In guix/lint.scm:
1010:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
In ice-9/boot-9.scm:
829:9 0 (catch srfi-34 #<procedure 7fcd9f2c0390 at guix/lint.s…> …)
ice-9/boot-9.scm:829:9: In procedure catch:
Wrong type to apply: #f
It's slightly different then on 1.0.1 (now at guix/lint.scm), but the
error seems to be the same.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#37160: guix lint --checkers=refresh fails
2019-08-27 9:44 ` Ludovic Courtès
2019-08-27 10:27 ` Jonathan Brielmaier
@ 2019-08-27 10:29 ` quiliro
2019-08-27 12:51 ` Jonathan Brielmaier
1 sibling, 1 reply; 8+ messages in thread
From: quiliro @ 2019-08-27 10:29 UTC (permalink / raw)
To: Jonathan Brielmaier, 37160
> Jonathan Brielmaier <jonathan.brielmaier@web.de> skribis:
>
>> During testing various guix commands on openSUSE Tumbleweed with the
>> openSUSE package, I found a strange error. This happens with guix 1.0.1
>> and d78bc23411 as openSUSE packages.
>
>
>> Steps to reproduce:
>> * Install Tumbleweed
>> $ sudo zypper install guix
>> $ sudo systemctl start guix-daemon
Why don't you 'guix pull' before the next step ?
>> $ guix install nss-certs
>> $ export
>> SSL_CERT_FILE="$HOME/.guix-profile/etc/ssl/certs/ca-certificates.crt"
>> $ export SSL_CERT_DIR="$HOME/.guix-profile/etc/ssl/certs"
>> $ guix lint --checkers=refresh hello
>> Backtrace:ello@2.10 [refresh]...
>> 8 (apply-smob/1 #<catch-closure 7f611c41c7c0>)
>> In ice-9/boot-9.scm:
>> 705:2 7 (call-with-prompt _ _ #<procedure default-prompt-handle…>)
>> In ice-9/eval.scm:
>> 619:8 6 (_ #(#(#<directory (guile-user) 7f611c43b140>)))
>> In guix/ui.scm:
>> 1747:12 5 (run-guix-command _ . _)
>> In srfi/srfi-1.scm:
>> 640:9 4 (for-each #<procedure 7f611af598e0 at guix/scripts/lin…> …)
>> In guix/scripts/lint.scm:
>> 1152:4 3 (run-checkers #<package hello@2.10 gnu/packages/base.s…> …)
>> In srfi/srfi-1.scm:
>> 640:9 2 (for-each #<procedure 7f6110857820 at guix/scripts/lin…> …)
>> In guix/scripts/lint.scm:
>> 954:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
>> In ice-9/boot-9.scm:
>> 829:9 0 (catch srfi-34 #<procedure 7f611074a3c0 at guix/script…> …)
>>
>> ice-9/boot-9.scm:829:9: In procedure catch:
>> Wrong type to apply: #f
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#37160: guix lint --checkers=refresh fails
2019-08-27 10:29 ` quiliro
@ 2019-08-27 12:51 ` Jonathan Brielmaier
2019-08-27 12:59 ` quiliro
0 siblings, 1 reply; 8+ messages in thread
From: Jonathan Brielmaier @ 2019-08-27 12:51 UTC (permalink / raw)
To: quiliro, 37160
On 27.08.19 12:29, quiliro@riseup.net wrote:
>
>> Jonathan Brielmaier <jonathan.brielmaier@web.de> skribis:
>>
>>> During testing various guix commands on openSUSE Tumbleweed with the
>>> openSUSE package, I found a strange error. This happens with guix 1.0.1
>>> and d78bc23411 as openSUSE packages.
>>
>>
>>> Steps to reproduce:
>>> * Install Tumbleweed
>>> $ sudo zypper install guix
>>> $ sudo systemctl start guix-daemon
>
> Why don't you 'guix pull' before the next step ?
Because I use an openSUSE packages which gets regulary built from
current master commit of guix. So I don't need guix pull :)
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#37160: guix lint --checkers=refresh fails
2019-08-27 12:51 ` Jonathan Brielmaier
@ 2019-08-27 12:59 ` quiliro
0 siblings, 0 replies; 8+ messages in thread
From: quiliro @ 2019-08-27 12:59 UTC (permalink / raw)
To: Jonathan Brielmaier; +Cc: 37160
El Mar, 27 de Agosto de 2019, 7:51 am, Jonathan Brielmaier escribió:
> On 27.08.19 12:29, quiliro@riseup.net wrote:
>>
>>> Jonathan Brielmaier <jonathan.brielmaier@web.de> skribis:
>>>
>>>> During testing various guix commands on openSUSE Tumbleweed with the
>>>> openSUSE package, I found a strange error. This happens with guix
>>>> 1.0.1
>>>> and d78bc23411 as openSUSE packages.
>>>
>>>
>>>> Steps to reproduce:
>>>> * Install Tumbleweed
>>>> $ sudo zypper install guix
>>>> $ sudo systemctl start guix-daemon
>>
>> Why don't you 'guix pull' before the next step ?
>
> Because I use an openSUSE packages which gets regulary built from
> current master commit of guix. So I don't need guix pull :)
Oh! Thank you for the information I did not know that was available. It
sounds like a good thing.
I am not sure about this, but (just in case) would you please test guix
pull and then verify if the error comes up again? Then we could compare.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#37160: guix lint --checkers=refresh fails
2019-08-27 10:27 ` Jonathan Brielmaier
@ 2019-08-27 22:33 ` Ludovic Courtès
2019-08-28 9:36 ` Jonathan Brielmaier
0 siblings, 1 reply; 8+ messages in thread
From: Ludovic Courtès @ 2019-08-27 22:33 UTC (permalink / raw)
To: Jonathan Brielmaier; +Cc: 37160
Hi,
Jonathan Brielmaier <jonathan.brielmaier@web.de> skribis:
> guix lint --checkers=refresh hello
> Backtrace:ello@2.10 [refresh]...
> 9 (apply-smob/1 #<catch-closure 7fcdabc0a560>)
> In ice-9/boot-9.scm:
> 705:2 8 (call-with-prompt _ _ #<procedure default-prompt-handle…>)
> In ice-9/eval.scm:
> 619:8 7 (_ #(#(#<directory (guile-user) 7fcdabcb9140>)))
> In guix/ui.scm:
> 1692:12 6 (run-guix-command _ . _)
> In srfi/srfi-1.scm:
> 640:9 5 (for-each #<procedure 7fcdaa7e9500 at guix/scripts/lin…> …)
> In guix/scripts/lint.scm:
> 57:4 4 (run-checkers #<package hello@2.10 gnu/packages/base.s…> …)
> In srfi/srfi-1.scm:
> 640:9 3 (for-each #<procedure 7fcd9e787ba0 at guix/scripts/lin…> …)
> In guix/scripts/lint.scm:
> 64:17 2 (_ _)
> In guix/lint.scm:
> 1010:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
> In ice-9/boot-9.scm:
> 829:9 0 (catch srfi-34 #<procedure 7fcd9f2c0390 at guix/lint.s…> …)
>
> ice-9/boot-9.scm:829:9: In procedure catch:
> Wrong type to apply: #f
I think commit 58d5f280a36e1cfddfa999d320c285726d8a8bc1 fixes it,
doesn’t it? :-)
Thanks,
Ludo’.
^ permalink raw reply [flat|nested] 8+ messages in thread
* bug#37160: guix lint --checkers=refresh fails
2019-08-27 22:33 ` Ludovic Courtès
@ 2019-08-28 9:36 ` Jonathan Brielmaier
0 siblings, 0 replies; 8+ messages in thread
From: Jonathan Brielmaier @ 2019-08-28 9:36 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 37160
On 28.08.19 00:33, Ludovic Courtès wrote:
> Hi,
>
> Jonathan Brielmaier <jonathan.brielmaier@web.de> skribis:
>
>> guix lint --checkers=refresh hello
>> Backtrace:ello@2.10 [refresh]...
>> 9 (apply-smob/1 #<catch-closure 7fcdabc0a560>)
>> In ice-9/boot-9.scm:
>> 705:2 8 (call-with-prompt _ _ #<procedure default-prompt-handle…>)
>> In ice-9/eval.scm:
>> 619:8 7 (_ #(#(#<directory (guile-user) 7fcdabcb9140>)))
>> In guix/ui.scm:
>> 1692:12 6 (run-guix-command _ . _)
>> In srfi/srfi-1.scm:
>> 640:9 5 (for-each #<procedure 7fcdaa7e9500 at guix/scripts/lin…> …)
>> In guix/scripts/lint.scm:
>> 57:4 4 (run-checkers #<package hello@2.10 gnu/packages/base.s…> …)
>> In srfi/srfi-1.scm:
>> 640:9 3 (for-each #<procedure 7fcd9e787ba0 at guix/scripts/lin…> …)
>> In guix/scripts/lint.scm:
>> 64:17 2 (_ _)
>> In guix/lint.scm:
>> 1010:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
>> In ice-9/boot-9.scm:
>> 829:9 0 (catch srfi-34 #<procedure 7fcd9f2c0390 at guix/lint.s…> …)
>>
>> ice-9/boot-9.scm:829:9: In procedure catch:
>> Wrong type to apply: #f
>
> I think commit 58d5f280a36e1cfddfa999d320c285726d8a8bc1 fixes it,
> doesn’t it? :-)
My package is now on2f57fa10f4, so includes your commit. But the error
still looks very similar:
$ guix lint --checkers=refresh hello
Backtrace:ello@2.10 [refresh]...
9 (apply-smob/1 #<catch-closure 7fcbddeb4800>)
In ice-9/boot-9.scm:
705:2 8 (call-with-prompt _ _ #<procedure default-prompt-handle…>)
In ice-9/eval.scm:
619:8 7 (_ #(#(#<directory (guile-user) 7fcbddf82140>)))
In guix/ui.scm:
1692:12 6 (run-guix-command _ . _)
In srfi/srfi-1.scm:
640:9 5 (for-each #<procedure 7fcbdbe8b0a0 at guix/scripts/lin…> …)
In guix/scripts/lint.scm:
57:4 4 (run-checkers #<package hello@2.10 gnu/packages/base.s…> …)
In srfi/srfi-1.scm:
640:9 3 (for-each #<procedure 7fcbd3b8ca80 at guix/scripts/lin…> …)
In guix/scripts/lint.scm:
64:17 2 (_ _)
In guix/lint.scm:
1010:2 1 (check-for-updates #<package hello@2.10 gnu/packages/ba…>)
In ice-9/boot-9.scm:
829:9 0 (catch srfi-34 #<procedure 7fcbd3943e10 at guix/lint.s…> …)
ice-9/boot-9.scm:829:9: In procedure catch:
Wrong type to apply: #f
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-08-28 9:37 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-23 14:45 bug#37160: guix lint --checkers=refresh fails Jonathan Brielmaier
2019-08-27 9:44 ` Ludovic Courtès
2019-08-27 10:27 ` Jonathan Brielmaier
2019-08-27 22:33 ` Ludovic Courtès
2019-08-28 9:36 ` Jonathan Brielmaier
2019-08-27 10:29 ` quiliro
2019-08-27 12:51 ` Jonathan Brielmaier
2019-08-27 12:59 ` quiliro
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).