* bug#70165: D-Bus system service breaks reconfiguration when /var/run/dbus is present + /run and /var/run are on separate file systems.
@ 2024-04-03 16:36 Hilton Chain via Bug reports for GNU Guix
2024-04-04 18:52 ` Liliana Marie Prikler
2024-05-10 14:22 ` Collin J. Doering via Bug reports for GNU Guix
0 siblings, 2 replies; 5+ messages in thread
From: Hilton Chain via Bug reports for GNU Guix @ 2024-04-03 16:36 UTC (permalink / raw)
To: 70165; +Cc: Vivien Kraus, Liliana Marie Prikler
Hi,
I have /var/run and /run on separate file systems, recently I noticed system
reconfiguration stopped with "guix system: error: rename-file: Invalid
cross-device link":
--8<---------------cut here---------------start------------->8---
newfstatat(AT_FDCWD, "/run", {st_mode=S_IFDIR|0755, st_size=440, ...}, AT_SYMLINK_NOFOLLOW) = 0
newfstatat(AT_FDCWD, "/run/dbus", {st_mode=S_IFDIR|0700, st_size=40, ...}, AT_SYMLINK_NOFOLLOW) = 0
mkdir("/run", 0777) = -1 EEXIST (File exists)
mkdir("/run/dbus", 0777) = -1 EEXIST (File exists)
chown("/run/dbus", 988, 983) = 0
chmod("/run/dbus", 0755) = 0
symlink("/run/dbus", "/var/run/dbus") = -1 EEXIST (File exists)
readlink("/var/run/dbus", 0x1634730, 100) = -1 EINVAL (Invalid argument)
openat(AT_FDCWD, "/var/run/dbus", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 17
newfstatat(17, "", {st_mode=S_IFDIR|0755, st_size=80, ...}, AT_EMPTY_PATH) = 0
getdents64(17, 0x16dfe10 /* 4 entries */, 32768) = 112
rename("/var/run/dbus/system_bus_socket", "/run/dbus/system_bus_socket") = -1 EXDEV (Invalid cross-device link)
close(13) = 0
write(2, "\33[1m\33[0mguix system: error: rena"..., 67^[[1m^[[0mguix system: error: rename-file: Invalid cross-device link
) = 67
exit_group(1) = ?
+++ exited with 1 +++
--8<---------------cut here---------------end--------------->8---
It's because /var/run/dbus was used for dbus service before, and now migration
to /run/dbus is done with ‘rename-file’:
--8<---------------cut here---------------start------------->8---
(rename-file (string-append "/var/run/dbus/" next)
(string-append "/run/dbus/" next))
--8<---------------cut here---------------end--------------->8---
I think the logic can be improved for this case, but not sure how at the moment.
What do you think?
Thanks
^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#70165: D-Bus system service breaks reconfiguration when /var/run/dbus is present + /run and /var/run are on separate file systems.
2024-04-03 16:36 bug#70165: D-Bus system service breaks reconfiguration when /var/run/dbus is present + /run and /var/run are on separate file systems Hilton Chain via Bug reports for GNU Guix
@ 2024-04-04 18:52 ` Liliana Marie Prikler
2024-04-05 1:53 ` Hilton Chain via Bug reports for GNU Guix
2024-05-10 14:22 ` Collin J. Doering via Bug reports for GNU Guix
1 sibling, 1 reply; 5+ messages in thread
From: Liliana Marie Prikler @ 2024-04-04 18:52 UTC (permalink / raw)
To: Hilton Chain, 70165; +Cc: Vivien Kraus
Am Donnerstag, dem 04.04.2024 um 00:36 +0800 schrieb Hilton Chain:
> Hi,
>
> I have /var/run and /run on separate file systems, recently I noticed
> system reconfiguration stopped with "guix system: error: rename-file:
> Invalid cross-device link":
>
> --8<---------------cut here---------------start------------->8---
> newfstatat(AT_FDCWD, "/run", {st_mode=S_IFDIR|0755, st_size=440,
> ...}, AT_SYMLINK_NOFOLLOW) = 0
> newfstatat(AT_FDCWD, "/run/dbus", {st_mode=S_IFDIR|0700, st_size=40,
> ...}, AT_SYMLINK_NOFOLLOW) = 0
> mkdir("/run", 0777) = -1 EEXIST (File exists)
> mkdir("/run/dbus", 0777) = -1 EEXIST (File exists)
> chown("/run/dbus", 988, 983) = 0
> chmod("/run/dbus", 0755) = 0
> symlink("/run/dbus", "/var/run/dbus") = -1 EEXIST (File exists)
> readlink("/var/run/dbus", 0x1634730, 100) = -1 EINVAL (Invalid
> argument)
> openat(AT_FDCWD, "/var/run/dbus",
> O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 17
> newfstatat(17, "", {st_mode=S_IFDIR|0755, st_size=80, ...},
> AT_EMPTY_PATH) = 0
> getdents64(17, 0x16dfe10 /* 4 entries */, 32768) = 112
> rename("/var/run/dbus/system_bus_socket",
> "/run/dbus/system_bus_socket") = -1 EXDEV (Invalid cross-device link)
> close(13) = 0
> write(2, "\33[1m\33[0mguix system: error: rena"..., 67^[[1m^[[0mguix
> system: error: rename-file: Invalid cross-device link
> ) = 67
> exit_group(1) = ?
> +++ exited with 1 +++
> --8<---------------cut here---------------end--------------->8---
>
> It's because /var/run/dbus was used for dbus service before, and now
> migration to /run/dbus is done with ‘rename-file’:
>
> --8<---------------cut here---------------start------------->8---
> (rename-file (string-append "/var/run/dbus/" next)
> (string-append "/run/dbus/" next))
> --8<---------------cut here---------------end--------------->8---
>
> I think the logic can be improved for this case, but not sure how at
> the moment.
> What do you think?
Is there a *good* reason to have those be separate file systems? :D
What does the FHS say?
Anyhow, cross-fs symlinks and rename-file ought to work assuming that
both file-systems are already mounted. Is one of them not needed for
boot?
Cheers
^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#70165: D-Bus system service breaks reconfiguration when /var/run/dbus is present + /run and /var/run are on separate file systems.
2024-04-04 18:52 ` Liliana Marie Prikler
@ 2024-04-05 1:53 ` Hilton Chain via Bug reports for GNU Guix
2024-04-06 6:43 ` Liliana Marie Prikler
0 siblings, 1 reply; 5+ messages in thread
From: Hilton Chain via Bug reports for GNU Guix @ 2024-04-05 1:53 UTC (permalink / raw)
To: Liliana Marie Prikler; +Cc: Vivien Kraus, 70165
On Fri, 05 Apr 2024 02:52:09 +0800,
Liliana Marie Prikler wrote:
>
> Am Donnerstag, dem 04.04.2024 um 00:36 +0800 schrieb Hilton Chain:
> > Hi,
> >
> > I have /var/run and /run on separate file systems, recently I noticed
> > system reconfiguration stopped with "guix system: error: rename-file:
> > Invalid cross-device link":
> >
> > --8<---------------cut here---------------start------------->8---
> > newfstatat(AT_FDCWD, "/run", {st_mode=S_IFDIR|0755, st_size=440,
> > ...}, AT_SYMLINK_NOFOLLOW) = 0
> > newfstatat(AT_FDCWD, "/run/dbus", {st_mode=S_IFDIR|0700, st_size=40,
> > ...}, AT_SYMLINK_NOFOLLOW) = 0
> > mkdir("/run", 0777) = -1 EEXIST (File exists)
> > mkdir("/run/dbus", 0777) = -1 EEXIST (File exists)
> > chown("/run/dbus", 988, 983) = 0
> > chmod("/run/dbus", 0755) = 0
> > symlink("/run/dbus", "/var/run/dbus") = -1 EEXIST (File exists)
> > readlink("/var/run/dbus", 0x1634730, 100) = -1 EINVAL (Invalid
> > argument)
> > openat(AT_FDCWD, "/var/run/dbus",
> > O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = 17
> > newfstatat(17, "", {st_mode=S_IFDIR|0755, st_size=80, ...},
> > AT_EMPTY_PATH) = 0
> > getdents64(17, 0x16dfe10 /* 4 entries */, 32768) = 112
> > rename("/var/run/dbus/system_bus_socket",
> > "/run/dbus/system_bus_socket") = -1 EXDEV (Invalid cross-device link)
> > close(13) = 0
> > write(2, "\33[1m\33[0mguix system: error: rena"..., 67^[[1m^[[0mguix
> > system: error: rename-file: Invalid cross-device link
> > ) = 67
> > exit_group(1) = ?
> > +++ exited with 1 +++
> > --8<---------------cut here---------------end--------------->8---
> >
> > It's because /var/run/dbus was used for dbus service before, and now
> > migration to /run/dbus is done with ‘rename-file’:
> >
> > --8<---------------cut here---------------start------------->8---
> > (rename-file (string-append "/var/run/dbus/" next)
> > (string-append "/run/dbus/" next))
> > --8<---------------cut here---------------end--------------->8---
> >
> > I think the logic can be improved for this case, but not sure how at
> > the moment.
> > What do you think?
> Is there a *good* reason to have those be separate file systems? :D
> What does the FHS say?
>
> Anyhow, cross-fs symlinks and rename-file ought to work assuming that
> both file-systems are already mounted. Is one of them not needed for
> boot?
Specifically, I'm using tmpfs for them:
--8<---------------cut here---------------start------------->8---
(file-system
(type "tmpfs")
(mount-point "/run")
(device "tmpfs")
(flags '(no-dev strict-atime))
(options "mode=0755,nr_inodes=800k,size=20%")
(needed-for-boot? #t)
(check? #f))
(file-system
(type "tmpfs")
(mount-point "/var/run")
(device "tmpfs")
(flags '(no-suid no-dev strict-atime))
(options "mode=0755,nr_inodes=800k,size=20%")
(needed-for-boot? #t)
(check? #f))
--8<---------------cut here---------------end--------------->8---
And here's a reproducer:
--8<---------------cut here---------------start------------->8---
test_dir="$(mktemp --directory)"
sudo mount --type tmpfs none "$test_dir"
touch "$test_dir/test"
guile -c "(rename-file \"$test_dir/test\" \"/tmp/test\")"
sudo umount "$test_dir"
rmdir "$test_dir"
--8<---------------cut here---------------end--------------->8---
--8<---------------cut here---------------start------------->8---
Backtrace:
In ice-9/boot-9.scm:
1752:10 6 (with-exception-handler _ _ #:unwind? _ # _)
In unknown file:
5 (apply-smob/0 #<thunk 7061ede8c300>)
In ice-9/boot-9.scm:
724:2 4 (call-with-prompt ("prompt") #<procedure 7061ede99320 …> …)
In ice-9/eval.scm:
619:8 3 (_ #(#(#<directory (guile-user) 7061ede8fc80>)))
In ice-9/command-line.scm:
185:19 2 (_ #<input: string 7061ede89850>)
In unknown file:
1 (eval (rename-file "/tmp/tmp.9wyzRfQ28l/test" "/tmp/…") #)
0 (rename-file "/tmp/tmp.9wyzRfQ28l/test" "/tmp/test")
ERROR: In procedure rename-file:
In procedure rename-file: Invalid cross-device link
--8<---------------cut here---------------end--------------->8---
^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#70165: D-Bus system service breaks reconfiguration when /var/run/dbus is present + /run and /var/run are on separate file systems.
2024-04-05 1:53 ` Hilton Chain via Bug reports for GNU Guix
@ 2024-04-06 6:43 ` Liliana Marie Prikler
0 siblings, 0 replies; 5+ messages in thread
From: Liliana Marie Prikler @ 2024-04-06 6:43 UTC (permalink / raw)
To: Hilton Chain; +Cc: Ludovic Courtès, Vivien Kraus, 70165
Am Freitag, dem 05.04.2024 um 09:53 +0800 schrieb Hilton Chain:
> [H]ere's a reproducer:
>
> --8<---------------cut here---------------start------------->8---
> test_dir="$(mktemp --directory)"
>
> sudo mount --type tmpfs none "$test_dir"
> touch "$test_dir/test"
>
> guile -c "(rename-file \"$test_dir/test\" \"/tmp/test\")"
>
> sudo umount "$test_dir"
> rmdir "$test_dir"
> --8<---------------cut here---------------end--------------->8---
>
> --8<---------------cut here---------------start------------->8---
> Backtrace:
> In ice-9/boot-9.scm:
> 1752:10 6 (with-exception-handler _ _ #:unwind? _ # _)
> In unknown file:
> 5 (apply-smob/0 #<thunk 7061ede8c300>)
> In ice-9/boot-9.scm:
> 724:2 4 (call-with-prompt ("prompt") #<procedure 7061ede99320 …>
> …)
> In ice-9/eval.scm:
> 619:8 3 (_ #(#(#<directory (guile-user) 7061ede8fc80>)))
> In ice-9/command-line.scm:
> 185:19 2 (_ #<input: string 7061ede89850>)
> In unknown file:
> 1 (eval (rename-file "/tmp/tmp.9wyzRfQ28l/test" "/tmp/…")
> #)
> 0 (rename-file "/tmp/tmp.9wyzRfQ28l/test" "/tmp/test")
>
> ERROR: In procedure rename-file:
> In procedure rename-file: Invalid cross-device link
> --8<---------------cut here---------------end--------------->8---
If I understand this reproducer correctly, there aren't even symbolic
links involved, are there?
Adding Ludo to CC, because this looks like a Guile bug to me.
Cheers
^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#70165: D-Bus system service breaks reconfiguration when /var/run/dbus is present + /run and /var/run are on separate file systems.
2024-04-03 16:36 bug#70165: D-Bus system service breaks reconfiguration when /var/run/dbus is present + /run and /var/run are on separate file systems Hilton Chain via Bug reports for GNU Guix
2024-04-04 18:52 ` Liliana Marie Prikler
@ 2024-05-10 14:22 ` Collin J. Doering via Bug reports for GNU Guix
1 sibling, 0 replies; 5+ messages in thread
From: Collin J. Doering via Bug reports for GNU Guix @ 2024-05-10 14:22 UTC (permalink / raw)
To: 70165
[-- Attachment #1: Type: text/plain, Size: 410 bytes --]
Hi there,
I recently hit this issue, and was able work around it by:
1. Get root shell (via sudo or otherwise)
2. Disable dbus-system: 'herd stop guix-system'
3. Update guix: 'guix system reconfigure ...'
4. Reboot
Thought I would note it just in case its useful to someone else.
Kind regards,
--
Collin J. Doering
http://rekahsoft.ca
http://blog.rekahsoft.ca
http://git.rekahsoft.ca
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 255 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-05-10 14:24 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-03 16:36 bug#70165: D-Bus system service breaks reconfiguration when /var/run/dbus is present + /run and /var/run are on separate file systems Hilton Chain via Bug reports for GNU Guix
2024-04-04 18:52 ` Liliana Marie Prikler
2024-04-05 1:53 ` Hilton Chain via Bug reports for GNU Guix
2024-04-06 6:43 ` Liliana Marie Prikler
2024-05-10 14:22 ` Collin J. Doering via Bug reports for GNU Guix
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/guix.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).