From: Andy Wingo <wingo@pobox.com>
To: Eli Zaretskii <eliz@gnu.org>
Cc: 14361-done@debbugs.gnu.org, ludo@gnu.org
Subject: bug#14361: Building guile 2.0.9 under mingw + msys
Date: Mon, 20 Jun 2016 23:19:24 +0200 [thread overview]
Message-ID: <8737o77e3n.fsf@pobox.com> (raw)
In-Reply-To: <83fvxyemk2.fsf@gnu.org> (Eli Zaretskii's message of "Tue, 07 May 2013 20:18:05 +0300")
Hi Eli :)
Thank you for your ongoing work on MinGW and Guile, it's really
appreciated. I just wanted to say that explicitly here, even though I'm
closing this bug, as I understand that things have progressed a bit in
these 3 years; anyway. Your work is so valuable to many users. Thanks!
Andy
On Tue 07 May 2013 19:18, Eli Zaretskii <eliz@gnu.org> writes:
>> From: Andy Wingo <wingo@pobox.com>
>> Cc: ludo@gnu.org, 10474-done@debbugs.gnu.org
>> Date: Sun, 24 Feb 2013 14:25:06 +0100
>>
>> So with these last commits, hopefully native MinGW builds are supported.
>> Would you mind testing again? Please send a new mail to
>> bug-guile@gnu.org to track any new failures.
>
> Thanks, and sorry for a long delay.
>
> I tried today building Guile 2.0.9. The C compilation went very
> smoothly, with only a couple of warnings (one is the known iconv
> prototype "issue", the other a variable that is set and not used).
> However, once it got to compiling Scheme files, it repeatedly failed
> after writing each .go file. Here are a few typical failures:
>
> GEN guile-procedures.texi
> Backtrace:
> In unknown file:
> ?: 3 [apply-smob/1 #<boot-closure 234da60 (_ _ _)> #t ...]
> ?: 2 [apply-smob/1 #<catch-closure 2e07050> quit #<unspecified>]
> ?: 1 [apply-smob/1 #<boot-closure 234da60 (_ _ _)> #t ...]
> ?: 0 [apply-smob/1 #<catch-closure 3f7eea0>]
>
> ERROR:
>
> The program then sits at the ERROR: prompt, but does not accept any
> input.
>
> Seems that this comes from smob.c:
>
> static SCM
> scm_smob_trampoline (unsigned int nreq, unsigned int nopt,
> unsigned int rest)
> {
> SCM trampoline;
>
> if (SCM_UNLIKELY (rest > 1 || nreq + nopt + rest > 3))
> scm_out_of_range ("make-smob", scm_from_uint (nreq + nopt + rest));
>
> trampoline = SCM_SMOB_TRAMPOLINE (nreq, nopt, rest);
>
> if (SCM_LIKELY (SCM_UNPACK (trampoline)))
> return trampoline;
>
> switch (nreq + nopt + rest)
> {
> /* The + 1 is for the smob itself. */
> case 0:
> trampoline = scm_c_make_gsubr ("apply-smob/0", nreq + 1, nopt, rest,
> apply_0);
> break;
> case 1:
> trampoline = scm_c_make_gsubr ("apply-smob/1", nreq + 1, nopt, rest,
> apply_1);
>
> But I have no idea what it means.
>
> When this happens, guile.exe still runs (actually, there are 2 Guile
> processes, one a child of the other), so it is impossible to delete
> guile-procedures.texi, because one of these processes holds it open.
> I needed to kill guile.exe (the child) to be able to try again.
>
> I tried "make -k" to see how far I can advance. The next compilation
> of ice-9/eval.scm then stops with the same error:
>
> make[2]: Entering directory `/d/usr/eli/utils/guile-2.0.9/module'
> GUILEC ice-9/eval.go
> wrote `ice-9/eval.go'
> Backtrace:
> In unknown file:
> ?: 3 [apply-smob/1 #<boot-closure 26cca60 (_ _ _)> #t ...]
> ?: 2 [apply-smob/1 #<catch-closure 2b12100> quit #<unspecified>]
> ?: 1 [apply-smob/1 #<boot-closure 26cca60 (_ _ _)> #t ...]
> ?: 0 [apply-smob/1 #<catch-closure 3af6340>]
>
> ERROR:
>
> Similarly after compiling ice-9/readline.scm:
>
> wrote `ice-9/readline.go'
> Backtrace:
> In unknown file:
> ?: 4 [apply-smob/1 #<catch-closure 246faf0> quit #<unspecified>]
> In ice-9/eval.scm:
> 484: 3 [eval # #]
> 481: 2 [lp (#<fluid 13>) (#<procedure 40d9d20 at ice-9/eval.scm:264:7 %args>)]
> In unknown file:
> ?: 1 [apply-smob/1 #<catch-closure 3ccb440>]
> In ice-9/eval.scm:
> 481: 0 [lp (#<fluid 12>) ((#<catch-closure 3ccb420>))]
>
> ice-9/eval.scm:481:19:
>
> Any ideas? Where should I look for the source of this problem?
>
> TIA
next prev parent reply other threads:[~2016-06-20 21:19 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CAL+StqnixLW+QwOP2BpZrjnz1wAQjnio9H6P=VM=9Cnn-B2-ng@mail.gmail.com>
2012-01-10 22:00 ` bug#10474: Building guile 2.x under mingw + msys Andy Wingo
[not found] ` <87pqerdxq4.fsf@pobox.com>
2012-01-17 8:09 ` Eli Zaretskii
2012-01-17 18:14 ` Eli Zaretskii
2012-01-18 23:55 ` Ludovic Courtès
2012-01-19 4:04 ` Eli Zaretskii
2012-02-02 0:59 ` Andy Wingo
2012-02-02 3:53 ` Eli Zaretskii
2012-02-02 16:39 ` Ludovic Courtès
2012-02-02 17:14 ` Eli Zaretskii
2012-02-02 17:34 ` Eli Zaretskii
2013-02-18 18:10 ` Andy Wingo
2013-02-18 19:56 ` Eli Zaretskii
2013-02-19 10:44 ` Andy Wingo
2013-02-19 12:55 ` Ludovic Courtès
2013-02-19 13:39 ` Andy Wingo
2013-02-19 17:53 ` Eli Zaretskii
2013-02-19 21:44 ` Andy Wingo
2013-02-20 19:16 ` Eli Zaretskii
2013-02-24 12:08 ` Andy Wingo
2013-02-19 15:47 ` Andy Wingo
2013-02-19 18:00 ` Eli Zaretskii
2013-02-24 13:25 ` Andy Wingo
2013-02-24 15:43 ` Eli Zaretskii
2013-05-07 17:18 ` bug#14361: Building guile 2.0.9 " Eli Zaretskii
2016-06-20 21:19 ` Andy Wingo [this message]
2016-06-21 12:46 ` Eli Zaretskii
2016-06-21 15:06 ` Andy Wingo
2016-06-21 15:42 ` Eli Zaretskii
2016-06-21 20:52 ` Andy Wingo
2016-06-24 9:51 ` Eli Zaretskii
2013-02-19 21:39 ` bug#10474: Building guile 2.x " Andy Wingo
2013-02-20 19:14 ` Eli Zaretskii
2013-02-20 21:57 ` Andy Wingo
2013-02-21 3:49 ` Eli Zaretskii
2013-02-21 8:18 ` Andy Wingo
2012-01-19 17:35 ` Eli Zaretskii
2012-01-21 11:09 ` Eli Zaretskii
2012-01-24 12:27 ` Eli Zaretskii
2012-01-25 21:12 ` Ludovic Courtès
2012-01-26 5:37 ` Eli Zaretskii
2012-01-29 18:30 ` Ludovic Courtès
2012-01-29 19:17 ` Eli Zaretskii
2012-01-29 22:56 ` Ludovic Courtès
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.gnu.org/software/guile/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8737o77e3n.fsf@pobox.com \
--to=wingo@pobox.com \
--cc=14361-done@debbugs.gnu.org \
--cc=eliz@gnu.org \
--cc=ludo@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).