From: Eli Zaretskii <eliz@gnu.org>
To: Paul Eggert <eggert@cs.ucla.edu>
Cc: p.stephani2@gmail.com, emacs-devel@gnu.org
Subject: Re: JSON/YAML/TOML/etc. parsing performance
Date: Wed, 04 Oct 2017 22:38:20 +0300 [thread overview]
Message-ID: <83poa2ya8j.fsf@gnu.org> (raw)
In-Reply-To: <73477c99-1600-a53d-d84f-737837d0f91f@cs.ucla.edu> (message from Paul Eggert on Wed, 4 Oct 2017 10:51:33 -0700)
> Cc: p.stephani2@gmail.com, emacs-devel@gnu.org
> From: Paul Eggert <eggert@cs.ucla.edu>
> Date: Wed, 4 Oct 2017 10:51:33 -0700
>
> We should not encourage more use of size_t within Emacs, as it's an
> unsigned type and unsigned types have the problems I mentioned.
But if we did use size_t for the arguments which can clearly only be
non-negative, the problems which we are discussing would not have
happened, and we could simply rely on our primitives to do those
checks. So it sounds like by avoiding use of size_t in those cases,
we are shooting ourselves in the foot, by making our code more
complex, less readable, and less efficient. IOW, a net loss. Look
how much more complex is the proposed code in json.c than it could
have been: we could remove all the redundant checks and quite some
code that supports them.
So I'm questioning the total avoidance of size_t in our low-level
code. Why not allow it in a few places where negative values are
clearly mistakes/bugs, and so if they appear as large positive values,
and are rejected as such, that's OK?
next prev parent reply other threads:[~2017-10-04 19:38 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-16 15:54 JSON/YAML/TOML/etc. parsing performance Ted Zlatanov
2017-09-16 16:02 ` Mark Oteiza
2017-09-17 0:02 ` Richard Stallman
2017-09-17 3:13 ` Mark Oteiza
2017-09-18 0:00 ` Richard Stallman
2017-09-17 0:02 ` Richard Stallman
2017-09-18 13:46 ` Ted Zlatanov
2017-09-17 18:46 ` Philipp Stephani
2017-09-17 19:05 ` Eli Zaretskii
2017-09-17 20:27 ` Philipp Stephani
2017-09-17 22:41 ` Mark Oteiza
2017-09-18 13:53 ` Ted Zlatanov
2017-09-17 21:17 ` Speed of Elisp (was: JSON/YAML/TOML/etc. parsing performance) Stefan Monnier
2017-09-18 13:26 ` JSON/YAML/TOML/etc. parsing performance Philipp Stephani
2017-09-18 13:58 ` Mark Oteiza
2017-09-18 14:14 ` Philipp Stephani
2017-09-18 14:28 ` Mark Oteiza
2017-09-18 14:36 ` Philipp Stephani
2017-09-18 15:02 ` Eli Zaretskii
2017-09-18 16:14 ` Philipp Stephani
2017-09-18 17:33 ` Eli Zaretskii
2017-09-18 19:57 ` Thien-Thi Nguyen
2017-09-18 14:57 ` Eli Zaretskii
2017-09-18 15:07 ` Mark Oteiza
2017-09-18 15:51 ` Eli Zaretskii
2017-09-18 16:22 ` Philipp Stephani
2017-09-18 18:08 ` Eli Zaretskii
2017-09-19 19:32 ` Richard Stallman
2017-09-18 17:26 ` Glenn Morris
2017-09-18 18:16 ` Eli Zaretskii
2017-09-18 16:08 ` Philipp Stephani
2017-09-19 8:18 ` Philipp Stephani
2017-09-19 19:09 ` Eli Zaretskii
2017-09-28 21:19 ` Philipp Stephani
2017-09-28 21:27 ` Stefan Monnier
2017-09-29 19:55 ` Eli Zaretskii
2017-09-30 22:02 ` Philipp Stephani
2017-10-01 18:06 ` Eli Zaretskii
2017-10-03 12:26 ` Philipp Stephani
2017-10-03 15:31 ` Eli Zaretskii
2017-10-03 15:52 ` Philipp Stephani
2017-10-03 16:26 ` Eli Zaretskii
2017-10-03 17:10 ` Eli Zaretskii
2017-10-03 18:37 ` Philipp Stephani
2017-10-03 20:52 ` Paul Eggert
2017-10-04 5:33 ` Eli Zaretskii
2017-10-04 6:41 ` Paul Eggert
2017-10-04 8:03 ` Eli Zaretskii
2017-10-04 17:51 ` Paul Eggert
2017-10-04 19:38 ` Eli Zaretskii [this message]
2017-10-04 21:24 ` Paul Eggert
2017-10-05 1:48 ` Paul Eggert
2017-10-05 7:14 ` Eli Zaretskii
2017-10-08 22:52 ` Philipp Stephani
2017-10-09 5:54 ` Paul Eggert
2017-10-29 20:48 ` Philipp Stephani
2017-10-09 6:38 ` Eli Zaretskii
2017-10-05 7:12 ` Eli Zaretskii
2017-10-06 1:58 ` Paul Eggert
2017-10-06 7:40 ` Eli Zaretskii
2017-10-06 19:36 ` Paul Eggert
2017-10-06 21:03 ` Eli Zaretskii
2017-10-08 23:09 ` Philipp Stephani
2017-10-09 6:19 ` Paul Eggert
2017-10-29 20:48 ` Philipp Stephani
2017-10-29 22:49 ` Philipp Stephani
2017-12-09 23:05 ` Philipp Stephani
2017-12-10 7:08 ` Eli Zaretskii
2017-12-10 13:26 ` Philipp Stephani
2017-12-10 13:32 ` Ted Zlatanov
2017-10-08 23:04 ` Philipp Stephani
2017-10-09 6:47 ` Eli Zaretskii
2017-10-08 17:58 ` Philipp Stephani
2017-10-08 18:42 ` Eli Zaretskii
2017-10-08 23:14 ` Philipp Stephani
2017-10-09 6:53 ` Eli Zaretskii
2017-10-29 20:41 ` Philipp Stephani
2017-10-09 6:22 ` Paul Eggert
2017-10-01 18:38 ` Eli Zaretskii
2017-10-03 12:12 ` Philipp Stephani
2017-10-03 14:54 ` Eli Zaretskii
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.gnu.org/software/emacs/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=83poa2ya8j.fsf@gnu.org \
--to=eliz@gnu.org \
--cc=eggert@cs.ucla.edu \
--cc=emacs-devel@gnu.org \
--cc=p.stephani2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).