* bug#2018: 23.0.60; Rmail buffer's encoding set incorrectly @ 2009-01-24 12:06 ` Eli Zaretskii 2009-01-31 13:50 ` bug#2018: marked as done (23.0.60; Rmail buffer's encoding set incorrectly) Emacs bug Tracking System 0 siblings, 1 reply; 4+ messages in thread From: Eli Zaretskii @ 2009-01-24 12:06 UTC (permalink / raw) To: emacs-pretest-bug Start Rmail on an mbox file FOO with "C-u M-x rmail RET FOO RET", then evaluate buffer-file-coding-system: you will see the value of default-buffer-file-coding-system, instead of the encoding of the message that is being displayed. Type `p' and then `n' (to get to the same message): the value now changes to undecided-unix. Type "C-x C-s" (perhaps after making some changes, such as deleting a message): the value changes to raw-text-dos. Type `p' two times, and the value changes back to undecided-unix. If Emacs crashed, and you have the Emacs process in the gdb debugger, please include the output from the following gdb commands: `bt full' and `xbacktrace'. If you would like to further debug the crash, please read the file d:/gnu/emacs/etc/DEBUG for instructions. In GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600) of 2009-01-24 on HOME-C4E4A596F7 Windowing system distributor `Microsoft Corp.', version 5.1.2600 configured using `configure --with-gcc (3.4)' Important settings: value of $LC_ALL: nil value of $LC_COLLATE: nil value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: ENU value of $XMODIFIERS: nil locale-coding-system: cp1255 default-enable-multibyte-characters: t Major mode: RMAIL Minor modes in effect: tooltip-mode: t tool-bar-mode: t mouse-wheel-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t font-lock-mode: t blink-cursor-mode: t global-auto-composition-mode: t auto-composition-mode: t auto-encryption-mode: t auto-compression-mode: t line-number-mode: t transient-mark-mode: t Recent input: <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> O t h e r SPC <up> <left> SPC SPC <delete> <delete> <M-right> SPC ` = ' SPC c h a r a c t e r s SPC e l s e w h e r e SPC i n SPC t h e SPC b o d y SPC o f SPC t h e SPC p a r t i a l SPC m e s s a g e SPC a l s o SPC b e c o m e SPC e n c o d e d SPC i n SPC q u o t e d - p r i n t a b l e . M-q <up> <up> <down> <down> <right> <C-home> <down> <down> <C-right> <C-right> <C-right> <C-right> <C-right> <C-right> <C-right> <C-right> <right> r e - <C-right> C-k SPC q u o t e d - p r i n t a b l e SPC p a r t s <down> <down> <right> <up> <down> <up> <down> C-SPC <next> <down> <down> <down> <down> <down> <down> <down> <down> <down> <next> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <next> <next> <next> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> M-w <help-echo> <C-home> <down> <down> <C-right> <C-right> <C-right> <C-right> <right> <right> C-SPC C-e M-w <help-echo> <help-echo> <help-echo> C-x b <return> M-x <up> <up> <return> Recent messages: Quit Mark set Auto-saving...done Mark set [3 times] Auto-saving...done Mark set [2 times] Auto-saving...done Saved text from "In an Rmail buffer that holds a multi-pa" Mark set [2 times] Auto-saving...done ^ permalink raw reply [flat|nested] 4+ messages in thread
* bug#2018: marked as done (23.0.60; Rmail buffer's encoding set incorrectly) 2009-01-24 12:06 ` bug#2018: 23.0.60; Rmail buffer's encoding set incorrectly Eli Zaretskii @ 2009-01-31 13:50 ` Emacs bug Tracking System 0 siblings, 0 replies; 4+ messages in thread From: Emacs bug Tracking System @ 2009-01-31 13:50 UTC (permalink / raw) To: Eli Zaretskii [-- Attachment #1: Type: text/plain, Size: 887 bytes --] Your message dated Sat, 31 Jan 2009 15:40:02 +0200 with message-id <uhc3fzj9p.fsf@gnu.org> and subject line Re: bug#2018: 23.0.60; Rmail buffer's encoding set incorrectly has caused the Emacs bug report #2018, regarding 23.0.60; Rmail buffer's encoding set incorrectly to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@emacsbugs.donarmstrong.com immediately.) -- 2018: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=2018 Emacs Bug Tracking System Contact owner@emacsbugs.donarmstrong.com with problems [-- Attachment #2: Type: message/rfc822, Size: 5749 bytes --] From: Eli Zaretskii <eliz@gnu.org> To: emacs-pretest-bug@gnu.org Subject: 23.0.60; Rmail buffer's encoding set incorrectly Date: Sat, 24 Jan 2009 14:06:23 +0200 Message-ID: <uiqo4ucw0.fsf@gnu.org> Start Rmail on an mbox file FOO with "C-u M-x rmail RET FOO RET", then evaluate buffer-file-coding-system: you will see the value of default-buffer-file-coding-system, instead of the encoding of the message that is being displayed. Type `p' and then `n' (to get to the same message): the value now changes to undecided-unix. Type "C-x C-s" (perhaps after making some changes, such as deleting a message): the value changes to raw-text-dos. Type `p' two times, and the value changes back to undecided-unix. If Emacs crashed, and you have the Emacs process in the gdb debugger, please include the output from the following gdb commands: `bt full' and `xbacktrace'. If you would like to further debug the crash, please read the file d:/gnu/emacs/etc/DEBUG for instructions. In GNU Emacs 23.0.60.1 (i386-mingw-nt5.1.2600) of 2009-01-24 on HOME-C4E4A596F7 Windowing system distributor `Microsoft Corp.', version 5.1.2600 configured using `configure --with-gcc (3.4)' Important settings: value of $LC_ALL: nil value of $LC_COLLATE: nil value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: ENU value of $XMODIFIERS: nil locale-coding-system: cp1255 default-enable-multibyte-characters: t Major mode: RMAIL Minor modes in effect: tooltip-mode: t tool-bar-mode: t mouse-wheel-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t font-lock-mode: t blink-cursor-mode: t global-auto-composition-mode: t auto-composition-mode: t auto-encryption-mode: t auto-compression-mode: t line-number-mode: t transient-mark-mode: t Recent input: <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> O t h e r SPC <up> <left> SPC SPC <delete> <delete> <M-right> SPC ` = ' SPC c h a r a c t e r s SPC e l s e w h e r e SPC i n SPC t h e SPC b o d y SPC o f SPC t h e SPC p a r t i a l SPC m e s s a g e SPC a l s o SPC b e c o m e SPC e n c o d e d SPC i n SPC q u o t e d - p r i n t a b l e . M-q <up> <up> <down> <down> <right> <C-home> <down> <down> <C-right> <C-right> <C-right> <C-right> <C-right> <C-right> <C-right> <C-right> <right> r e - <C-right> C-k SPC q u o t e d - p r i n t a b l e SPC p a r t s <down> <down> <right> <up> <down> <up> <down> C-SPC <next> <down> <down> <down> <down> <down> <down> <down> <down> <down> <next> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <next> <next> <next> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> <down> M-w <help-echo> <C-home> <down> <down> <C-right> <C-right> <C-right> <C-right> <right> <right> C-SPC C-e M-w <help-echo> <help-echo> <help-echo> C-x b <return> M-x <up> <up> <return> Recent messages: Quit Mark set Auto-saving...done Mark set [3 times] Auto-saving...done Mark set [2 times] Auto-saving...done Saved text from "In an Rmail buffer that holds a multi-pa" Mark set [2 times] Auto-saving...done [-- Attachment #3: Type: message/rfc822, Size: 2102 bytes --] From: Eli Zaretskii <eliz@gnu.org> To: 2018-done@emacsbugs.donarmstrong.com Subject: Re: bug#2018: 23.0.60; Rmail buffer's encoding set incorrectly Date: Sat, 31 Jan 2009 15:40:02 +0200 Message-ID: <uhc3fzj9p.fsf@gnu.org> Fixed with these changes: 2009-01-31 Eli Zaretskii <eliz@gnu.org> * mail/rmail.el (rmail-convert-babyl-to-mbox): Set Rmail's buffer encoding to `raw-text-unix'. (rmail-perm-variables): Set encoding of rmail-view-buffer to `undecided-unix'. (rmail-redecode-body): Don't change EOL conversion of the new encoding if the old one left it unspecified. (rmail-swap-buffers): New function. (rmail-change-major-mode-hook, rmail-swap-buffers-maybe) (rmail-show-message): Use rmail-swap-buffers. (rmail-decode-region): If DESTINATION is a buffer, set the encoding of that buffer, rather than the current buffer. ^ permalink raw reply [flat|nested] 4+ messages in thread
* bug#2080: 23.0.60; buffer-file-coding-system not set in RMAIL buffer @ 2009-01-27 4:55 ` Kenichi Handa 2009-01-31 13:50 ` bug#2080: marked as done (23.0.60; buffer-file-coding-system not set in RMAIL buffer) Emacs bug Tracking System 0 siblings, 1 reply; 4+ messages in thread From: Kenichi Handa @ 2009-01-27 4:55 UTC (permalink / raw) To: emacs-pretest-bug The local variable buffer-file-coding-system is not set in RMAIL buffer. The function rmail-docode-region does set buffer-file-coding-system but that information is lost after that. --- Kenichi Handa handa@m17n.org In GNU Emacs 23.0.60.3 (i686-pc-linux-gnu, X toolkit, Xaw3d scroll bars) of 2009-01-26 on etlken Windowing system distributor `The X.Org Foundation', version 11.0.10502000 Important settings: value of $LC_ALL: nil value of $LC_COLLATE: nil value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: en_US.UTF-8 value of $XMODIFIERS: nil locale-coding-system: utf-8-unix default-enable-multibyte-characters: t Major mode: Emacs-Lisp Minor modes in effect: shell-dirtrack-mode: t diff-auto-refine-mode: t display-time-mode: t tooltip-mode: t tool-bar-mode: t mouse-wheel-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t font-lock-mode: t global-auto-composition-mode: t auto-composition-mode: t auto-encryption-mode: t auto-compression-mode: t line-number-mode: t Recent input: C-p C-b C-SPC M-f M-f M-f M-f <escape> w C-x o C-y C-a ( C-e ) : SPC F i x SPC p r e v i o u s SPC c h a n g e . <return> C-c C-c C-n C-n C-n C-n C-M-x C-x b C-g M-x b y t e SPC c SPC SPC <return> <return> C-x b <return> p R <return> S <return> C-x b * m <tab> <return> C-a M-f M-f M-f SPC a SPC n e w SPC f u n c t i o n C-e <escape> q SPC SPC SPC I f SPC y o u SPC f i n d SPC a SPC b e t t e r SPC n a m e M-b M-b M-b M-b M-b M-b C-b C-b C-b C-b SPC a n d SPC u s e SPC i t SPC t o SPC f i x SPC b r o k e n SPC C-o C-o r m a i l - g e t - c o d i n g - s y s t e m C-h f <return> C-x 1 . <escape> C-g <escape> q C-a C-n C-n C-k C-u 7 C-c C-w <escape> < C-v C-l C-n C-n C-n C-n C-n C-n C-n C-n C-n C-n <escape> < C-c C-c > C-x b C-g C-x b <return> C-s r m a i l - C-a C-x b <return> h C-r r m a i l C-r C-a <escape> > C-r C-r C-x C-x C-p <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <down-mouse-1> <mouse-1> M-x r e p o r t <tab> <return> M-p M-p C-k C-g C-x b <return> C-s r m a i l - d e c o d e C-a C-u C-v C-x b C-g M-x M-p <return> Recent messages: Mark set [3 times] Sending...done Quit Mark saved where search started Computing summary lines...done Mark saved where search started Mark set Mark saved where search started Quit Mark saved where search started Quit ^ permalink raw reply [flat|nested] 4+ messages in thread
* bug#2080: marked as done (23.0.60; buffer-file-coding-system not set in RMAIL buffer) 2009-01-27 4:55 ` bug#2080: 23.0.60; buffer-file-coding-system not set in RMAIL buffer Kenichi Handa @ 2009-01-31 13:50 ` Emacs bug Tracking System 0 siblings, 0 replies; 4+ messages in thread From: Emacs bug Tracking System @ 2009-01-31 13:50 UTC (permalink / raw) To: Eli Zaretskii [-- Attachment #1: Type: text/plain, Size: 897 bytes --] Your message dated Sat, 31 Jan 2009 15:40:02 +0200 with message-id <uhc3fzj9p.fsf@gnu.org> and subject line Re: bug#2018: 23.0.60; Rmail buffer's encoding set incorrectly has caused the Emacs bug report #2018, regarding 23.0.60; buffer-file-coding-system not set in RMAIL buffer to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@emacsbugs.donarmstrong.com immediately.) -- 2018: http://emacsbugs.donarmstrong.com/cgi-bin/bugreport.cgi?bug=2018 Emacs Bug Tracking System Contact owner@emacsbugs.donarmstrong.com with problems [-- Attachment #2: Type: message/rfc822, Size: 4774 bytes --] From: Kenichi Handa <handa@m17n.org> To: emacs-pretest-bug@gnu.org Subject: 23.0.60; buffer-file-coding-system not set in RMAIL buffer Date: Tue, 27 Jan 2009 13:55:23 +0900 Message-ID: <E1LRfyt-0007uh-D1@etlken> The local variable buffer-file-coding-system is not set in RMAIL buffer. The function rmail-docode-region does set buffer-file-coding-system but that information is lost after that. --- Kenichi Handa handa@m17n.org In GNU Emacs 23.0.60.3 (i686-pc-linux-gnu, X toolkit, Xaw3d scroll bars) of 2009-01-26 on etlken Windowing system distributor `The X.Org Foundation', version 11.0.10502000 Important settings: value of $LC_ALL: nil value of $LC_COLLATE: nil value of $LC_CTYPE: nil value of $LC_MESSAGES: nil value of $LC_MONETARY: nil value of $LC_NUMERIC: nil value of $LC_TIME: nil value of $LANG: en_US.UTF-8 value of $XMODIFIERS: nil locale-coding-system: utf-8-unix default-enable-multibyte-characters: t Major mode: Emacs-Lisp Minor modes in effect: shell-dirtrack-mode: t diff-auto-refine-mode: t display-time-mode: t tooltip-mode: t tool-bar-mode: t mouse-wheel-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t font-lock-mode: t global-auto-composition-mode: t auto-composition-mode: t auto-encryption-mode: t auto-compression-mode: t line-number-mode: t Recent input: C-p C-b C-SPC M-f M-f M-f M-f <escape> w C-x o C-y C-a ( C-e ) : SPC F i x SPC p r e v i o u s SPC c h a n g e . <return> C-c C-c C-n C-n C-n C-n C-M-x C-x b C-g M-x b y t e SPC c SPC SPC <return> <return> C-x b <return> p R <return> S <return> C-x b * m <tab> <return> C-a M-f M-f M-f SPC a SPC n e w SPC f u n c t i o n C-e <escape> q SPC SPC SPC I f SPC y o u SPC f i n d SPC a SPC b e t t e r SPC n a m e M-b M-b M-b M-b M-b M-b C-b C-b C-b C-b SPC a n d SPC u s e SPC i t SPC t o SPC f i x SPC b r o k e n SPC C-o C-o r m a i l - g e t - c o d i n g - s y s t e m C-h f <return> C-x 1 . <escape> C-g <escape> q C-a C-n C-n C-k C-u 7 C-c C-w <escape> < C-v C-l C-n C-n C-n C-n C-n C-n C-n C-n C-n C-n <escape> < C-c C-c > C-x b C-g C-x b <return> C-s r m a i l - C-a C-x b <return> h C-r r m a i l C-r C-a <escape> > C-r C-r C-x C-x C-p <help-echo> <help-echo> <help-echo> <help-echo> <help-echo> <down-mouse-1> <mouse-1> M-x r e p o r t <tab> <return> M-p M-p C-k C-g C-x b <return> C-s r m a i l - d e c o d e C-a C-u C-v C-x b C-g M-x M-p <return> Recent messages: Mark set [3 times] Sending...done Quit Mark saved where search started Computing summary lines...done Mark saved where search started Mark set Mark saved where search started Quit Mark saved where search started Quit [-- Attachment #3: Type: message/rfc822, Size: 2102 bytes --] From: Eli Zaretskii <eliz@gnu.org> To: 2018-done@emacsbugs.donarmstrong.com Subject: Re: bug#2018: 23.0.60; Rmail buffer's encoding set incorrectly Date: Sat, 31 Jan 2009 15:40:02 +0200 Message-ID: <uhc3fzj9p.fsf@gnu.org> Fixed with these changes: 2009-01-31 Eli Zaretskii <eliz@gnu.org> * mail/rmail.el (rmail-convert-babyl-to-mbox): Set Rmail's buffer encoding to `raw-text-unix'. (rmail-perm-variables): Set encoding of rmail-view-buffer to `undecided-unix'. (rmail-redecode-body): Don't change EOL conversion of the new encoding if the old one left it unspecified. (rmail-swap-buffers): New function. (rmail-change-major-mode-hook, rmail-swap-buffers-maybe) (rmail-show-message): Use rmail-swap-buffers. (rmail-decode-region): If DESTINATION is a buffer, set the encoding of that buffer, rather than the current buffer. ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2009-01-31 13:50 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <uhc3fzj9p.fsf@gnu.org>
2009-01-24 12:06 ` bug#2018: 23.0.60; Rmail buffer's encoding set incorrectly Eli Zaretskii
2009-01-31 13:50 ` bug#2018: marked as done (23.0.60; Rmail buffer's encoding set incorrectly) Emacs bug Tracking System
2009-01-27 4:55 ` bug#2080: 23.0.60; buffer-file-coding-system not set in RMAIL buffer Kenichi Handa
2009-01-31 13:50 ` bug#2080: marked as done (23.0.60; buffer-file-coding-system not set in RMAIL buffer) Emacs bug Tracking System
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).