bug#17544: 24.3; [PATCH] Improved diff-mode navigation/manipulation

[Dima Kogan <dima@secretsauce.net>]

[-- Attachment #1: Type: text/plain, Size: 446 bytes --]

Here's yet another revised patch. The (call-interactively) at the end of
(diff-apply-hunk) was important, it turns out. This would force it to
use the new logic to move to the next hunk, instead of the legacy logic.
I purposely left the behavior of (diff-next-hunk) unchanged from before
when running non-interactively, and here I explicitly want the new
behavior.

This patch puts the (call-interactively) back in, and explains the
rationale.



[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: 0001-Improved-diff-mode-navigation-manipulation.patch --]
[-- Type: text/x-diff, Size: 9162 bytes --]

From 21964781a87b615cdab65ab2643deaac8dbaa406 Mon Sep 17 00:00:00 2001
From: Dima Kogan <Dmitriy.Kogan@jpl.nasa.gov>
Date: Wed, 14 Sep 2016 15:25:06 -0700
Subject: [PATCH] Improved diff-mode navigation/manipulation

Navigation and use of diff buffers had several annoying corner cases that this
patch fixes. These corner cases were largely due to inconsistent treatment of
file headers. Say you have a diff such as this:

 --- aaa
 +++ bbb
 @@ -52,7 +52,7 @@
 hunk1
 @@ -74,7 +74,7 @@
 hunk2
 --- ccc
 +++ ddd
 @@ -608,6 +608,6 @@
 hunk3
 @@ -654,7 +654,7 @@
 hunk4

The file headers here are the '---' and '+++' lines. With the point on such a
line, hunk operations would sometimes refer to the next hunk and sometimes to
the previous hunk. Most of the time it would be the previous hunk, which is
not what the user would expect. This patch consistently treats such headers as
the next hunk. So with this patch, if the point is on the '--- ccc' line, the
point is seen as referring to hunk3.

Specific behaviors this fixes are:

1. It should be possible to place the point in the middle of a diff buffer,
and press M-k repeatedly to kill hunks in the order they appear in the buffer.
With the point on hunk1, M-k M-k would kill hunk1 then hunk2. With the point
on hunk3, it would kill hunk3 then hunk4; this is fine. However, with the
point on hunk2, it'd kill hunk2 then hunk1. This is fixed by this patch.

2. Similarly, it should be possible to apply hunks in order. Previously with
the point at the start, C-c C-a would apply the hunk1, then move the point to
the first @@ header, and thus C-c C-a would try to apply the same hunk again.
---
 lisp/vc/diff-mode.el | 115 +++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 102 insertions(+), 13 deletions(-)

diff --git a/lisp/vc/diff-mode.el b/lisp/vc/diff-mode.el
index 58498cb..b37ceec 100644
--- a/lisp/vc/diff-mode.el
+++ b/lisp/vc/diff-mode.el
@@ -551,7 +551,7 @@ diff--auto-refine-data
 
 ;; Define diff-{hunk,file}-{prev,next}
 (easy-mmode-define-navigation
- diff-hunk diff-hunk-header-re "hunk" diff-end-of-hunk diff-restrict-view
+ diff--internal-hunk diff-hunk-header-re "hunk" diff-end-of-hunk diff-restrict-view
  (when diff-auto-refine-mode
    (unless (prog1 diff--auto-refine-data
              (setq diff--auto-refine-data
@@ -570,7 +570,88 @@ diff--auto-refine-data
                                 (diff-refine-hunk))))))))))))
 
 (easy-mmode-define-navigation
- diff-file diff-file-header-re "file" diff-end-of-file)
+ diff--internal-file diff-file-header-re "file" diff-end-of-file)
+
+(defun diff--wrap-navigation (isinteractive
+                              what orig
+                              header-re goto-start-func count)
+  "I override the default diff-{hunk,file}-{next,prev}
+implementation by skipping any lines that are associated with
+this hunk/file but precede the hunk-start marker. For instance, a
+diff file could contain
+
+diff --git a/lisp/vc/diff-mode.el b/lisp/vc/diff-mode.el
+index 923de9a..6b1c24f 100644
+--- a/lisp/vc/diff-mode.el
++++ b/lisp/vc/diff-mode.el
+@@ -590,6 +590,22 @@
+.......
+
+If a point is on 'index', then the point is considered to be in
+this first hunk. Here I move the point to the @@... marker before
+executing the default diff-hunk-next/prev implementation to move
+to the NEXT marker"
+  (if (not isinteractive)
+      (funcall orig count)
+
+    (let ((start (point)))
+      (funcall goto-start-func)
+
+      ;; I trap the error
+      (condition-case nil
+          (funcall orig count)
+        (error nil))
+
+      (when (not (looking-at header-re))
+        (goto-char start)
+        (user-error (format "No %s" what))))))
+
+(defun diff-hunk-prev (&optional count)
+  "Go to the previous COUNT'th hunk"
+  (interactive "p")
+  (diff--wrap-navigation
+   (called-interactively-p 'interactive)
+   "prev hunk"
+   'diff--internal-hunk-prev
+   diff-hunk-header-re
+   (lambda () (goto-char (car (diff-bounds-of-hunk))))
+   count))
+
+(defun diff-hunk-next (&optional count)
+  "Go to the next COUNT'th hunk"
+  (interactive "p")
+  (diff--wrap-navigation
+   (called-interactively-p 'interactive)
+   "next hunk"
+   'diff--internal-hunk-next
+   diff-hunk-header-re
+   (lambda () (goto-char (car (diff-bounds-of-hunk))))
+   count))
+
+(defun diff-file-prev (&optional count)
+  "Go to the previous COUNT'th file"
+  (interactive "p")
+  (diff--wrap-navigation
+   (called-interactively-p 'interactive)
+   "prev file"
+   'diff--internal-file-prev
+   diff-file-header-re
+   (lambda () (goto-char (car (diff-bounds-of-file))) (diff--internal-hunk-next))
+   count))
+
+(defun diff-file-next (&optional count)
+  "Go to the next COUNT'th file"
+  (interactive "p")
+  (diff--wrap-navigation
+   (called-interactively-p 'interactive)
+   "next file"
+   'diff--internal-file-next
+   diff-file-header-re
+   (lambda () (goto-char (car (diff-bounds-of-file))) (diff--internal-hunk-next))
+   count))
+
+
+
 
 (defun diff-bounds-of-hunk ()
   "Return the bounds of the diff hunk at point.
@@ -581,12 +662,13 @@ diff-bounds-of-hunk
     (let ((pos (point))
 	  (beg (diff-beginning-of-hunk t))
 	  (end (diff-end-of-hunk)))
-      (cond ((>= end pos)
+      (cond ((> end pos)
 	     (list beg end))
 	    ;; If this hunk ends above POS, consider the next hunk.
 	    ((re-search-forward diff-hunk-header-re nil t)
 	     (list (match-beginning 0) (diff-end-of-hunk)))
-	    (t (error "No hunk found"))))))
+            ;; There's no next hunk, so just take the one we have
+	    (t (list beg end))))))
 
 (defun diff-bounds-of-file ()
   "Return the bounds of the file segment at point.
@@ -1665,8 +1747,9 @@ diff-find-source-location
 SWITCHED is non-nil if the patch is already applied.
 NOPROMPT, if non-nil, means not to prompt the user."
   (save-excursion
-    (let* ((other (diff-xor other-file diff-jump-to-old-file))
-	   (char-offset (- (point) (diff-beginning-of-hunk t)))
+    (let* ((hunk-bounds (diff-bounds-of-hunk))
+           (other (diff-xor other-file diff-jump-to-old-file))
+           (char-offset (- (point) (goto-char (car hunk-bounds))))
            ;; Check that the hunk is well-formed.  Otherwise diff-mode and
            ;; the user may disagree on what constitutes the hunk
            ;; (e.g. because an empty line truncates the hunk mid-course),
@@ -1675,7 +1758,7 @@ diff-find-source-location
 	   ;; Suppress check when NOPROMPT is non-nil (Bug#3033).
            (_ (unless noprompt (diff-sanity-check-hunk)))
 	   (hunk (buffer-substring
-                  (point) (save-excursion (diff-end-of-hunk) (point))))
+                  (point) (cadr hunk-bounds)))
 	   (old (diff-hunk-text hunk reverse char-offset))
 	   (new (diff-hunk-text hunk (not reverse) char-offset))
 	   ;; Find the location specification.
@@ -1783,8 +1866,13 @@ diff-apply-hunk
       ;; Display BUF in a window
       (set-window-point (display-buffer buf) (+ (car pos) (cdr new)))
       (diff-hunk-status-msg line-offset (diff-xor switched reverse) nil)
+
+      ;; I advance to the next hunk interactively because I want the
+      ;; interactive behavior of moving to the next logical hunk, not
+      ;; the legacy behavior where were would sometimes sty on the
+      ;; curent hunk.  See http://debbugs.gnu.org/17544
       (when diff-advance-after-apply-hunk
-	(diff-hunk-next))))))
+        (call-interactively 'diff-hunk-next))))))
 
 
 (defun diff-test-hunk (&optional reverse)
@@ -1865,14 +1953,15 @@ diff-current-defun
 (defun diff-ignore-whitespace-hunk ()
   "Re-diff the current hunk, ignoring whitespace differences."
   (interactive)
-  (let* ((char-offset (- (point) (diff-beginning-of-hunk t)))
+  (let* ((hunk-bounds (diff-bounds-of-hunk))
+         (char-offset (- (point) (goto-char (car hunk-bounds))))
 	 (opts (pcase (char-after) (?@ "-bu") (?* "-bc") (_ "-b")))
 	 (line-nb (and (or (looking-at "[^0-9]+\\([0-9]+\\)")
 			   (error "Can't find line number"))
 		       (string-to-number (match-string 1))))
 	 (inhibit-read-only t)
 	 (hunk (delete-and-extract-region
-		(point) (save-excursion (diff-end-of-hunk) (point))))
+                (point) (cadr hunk-bounds)))
 	 (lead (make-string (1- line-nb) ?\n)) ;Line nums start at 1.
 	 (file1 (make-temp-file "diff1"))
 	 (file2 (make-temp-file "diff2"))
@@ -1959,8 +2048,8 @@ diff-refine-hunk
   (interactive)
   (require 'smerge-mode)
   (save-excursion
-    (diff-beginning-of-hunk t)
-    (let* ((start (point))
+    (let* ((hunk-bounds (diff-bounds-of-hunk))
+           (start (goto-char (car hunk-bounds)))
            (style (diff-hunk-style))    ;Skips the hunk header as well.
            (beg (point))
            (props-c '((diff-mode . fine) (face diff-refine-changed)))
@@ -1968,7 +2057,7 @@ diff-refine-hunk
            (props-a '((diff-mode . fine) (face diff-refine-added)))
            ;; Be careful to go back to `start' so diff-end-of-hunk gets
            ;; to read the hunk header's line info.
-           (end (progn (goto-char start) (diff-end-of-hunk) (point))))
+           (end (goto-char (cadr hunk-bounds))))
 
       (remove-overlays beg end 'diff-mode 'fine)
 
-- 
2.8.0.rc3