* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore @ 2014-02-08 20:53 Ivan Kanis 2014-02-08 21:03 ` Eli Zaretskii 0 siblings, 1 reply; 18+ messages in thread From: Ivan Kanis @ 2014-02-08 20:53 UTC (permalink / raw) To: 16697 1) emacs -Q 2) eval (setq erc-modules '(scrolltobottom)) in *scratch* 3) M-x erc RET RET RET Wait for the window to fill up. I expect the prompt to stay at the bottom as it used to in 24.3. In GNU Emacs 24.3.50.1 (i686-pc-linux-gnu, GTK+ Version 2.24.20) of 2014-02-08 on tao.kanis.fr Repository revision: 116348 michael.albinus@gmx.de-20140208133515-mgy8agwqq4nc6bfb Windowing system distributor `The X.Org Foundation', version 11.0.11403000 System Description: Ubuntu 13.10 Configured using: `configure --prefix=/home/ivan/emacs-bzr --without-compress-install 'CFLAGS=-g -DSYSTEM_PURESIZE_EXTRA=1000000'' Important settings: value of $LANG: en_US.UTF8 locale-coding-system: utf-8-unix Major mode: ERC Minor modes in effect: erc-scrolltobottom-mode: t tooltip-mode: t electric-indent-mode: t mouse-wheel-mode: t tool-bar-mode: t menu-bar-mode: t file-name-shadow-mode: t global-font-lock-mode: t font-lock-mode: t blink-cursor-mode: t auto-composition-mode: t auto-encryption-mode: t auto-compression-mode: t line-number-mode: t transient-mark-mode: t Recent input: C-y H-i H-i H-i H-i H-i H-i H-i H-i H-i H-i <up> <up> <up> <up> <up> <up> <up> <up> <up> <up> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> <left> ( s e t q SPC C-e <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k C-k H-SPC M-SPC M-SPC <backspace> C-e ) ) C-x C-e M-x e r i c <return> <backspace> <backspace> c <return> <return> <return> <return> <return> / n i c <backspace> <backspace> <backspace> <backspace> M-k M-k C-x k <return> y e s <return> M-x e r c <return> <return> <return> 6 6 6 <return> <return> / j SPC # e m a c s <return> C-x b # e m a c s <return> M-x r e p o <tab> C-g C-h v e m a c s m <backspace> - m o <tab> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> <backspace> e r c - m o <tab> d <tab> l <backspace> u l e s <return> M-x r e p o r t - e m <tab> <return> Recent messages: Logging in without password forward-sentence: End of buffer [2 times] Connecting to irc.freenode.net:6667... ...done Logging in as 'ivan666'... Logging in without password Logging in as 'ivan666'... done Making completion list... Quit Making completion list... [2 times] Type C-x 1 to delete the help window. Load-path shadows: None found. Features: (shadow sort hashcash mail-extr emacsbug message rfc822 mml mml-sec mm-decode mm-bodies mm-encode mail-parse rfc2231 mailabbrev gmm-utils mailheader sendmail rfc2047 rfc2045 ietf-drums mail-utils help-mode easymenu mule-util network-stream starttls tls erc-goodies erc erc-backend erc-compat format-spec auth-source eieio byte-opt bytecomp byte-compile cconv eieio-core gnus-util mm-util help-fns mail-prsvr password-cache thingatpt pp time-date tooltip electric uniquify ediff-hook vc-hooks lisp-float-type mwheel x-win x-dnd tool-bar dnd fontset image regexp-opt fringe tabulated-list newcomment lisp-mode prog-mode register page menu-bar rfn-eshadow timer select scroll-bar mouse jit-lock font-lock syntax facemenu font-core frame cham georgian utf-8-lang misc-lang vietnamese tibetan thai tai-viet lao korean japanese hebrew greek romanian slovak czech european ethiopic indian cyrillic chinese case-table epa-hook jka-cmpr-hook help simple abbrev minibuffer nadvice loaddefs button faces cus-face macroexp files text-properties overlay sha1 md5 base64 format env code-pages mule custom widget hashtable-print-readable backquote make-network-process dbusbind gfilenotify dynamic-setting system-font-setting font-render-setting move-toolbar gtk x-toolkit x multi-tty emacs) ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-08 20:53 bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore Ivan Kanis @ 2014-02-08 21:03 ` Eli Zaretskii 2014-02-09 9:44 ` Ivan Kanis 0 siblings, 1 reply; 18+ messages in thread From: Eli Zaretskii @ 2014-02-08 21:03 UTC (permalink / raw) To: Ivan Kanis; +Cc: 16697 > From: Ivan Kanis <ivan@kanis.fr> > Date: Sat, 08 Feb 2014 21:53:47 +0100 > > 1) emacs -Q > 2) eval (setq erc-modules '(scrolltobottom)) in *scratch* > 3) M-x erc RET RET RET > > Wait for the window to fill up. > > I expect the prompt to stay at the bottom as it used to in 24.3. Does it help to set scroll-conservatively to a value larger than 100? ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-08 21:03 ` Eli Zaretskii @ 2014-02-09 9:44 ` Ivan Kanis 2014-02-09 17:16 ` Eli Zaretskii 0 siblings, 1 reply; 18+ messages in thread From: Ivan Kanis @ 2014-02-09 9:44 UTC (permalink / raw) To: Eli Zaretskii; +Cc: 16697 February, 08 at 23:03 Eli wrote: >> From: Ivan Kanis <ivan@kanis.fr> >> Date: Sat, 08 Feb 2014 21:53:47 +0100 >> >> 1) emacs -Q >> 2) eval (setq erc-modules '(scrolltobottom)) in *scratch* >> 3) M-x erc RET RET RET >> >> Wait for the window to fill up. >> >> I expect the prompt to stay at the bottom as it used to in 24.3. > > Does it help to set scroll-conservatively to a value larger than 100? Hi Eli, Of course it 'works' but it's global for all buffers. After years of conservative scroll set to 0 I am somewhat used to it. I have set it to 101 on my configuration to see if it's nice. This module did The Right Thing just for ERC buffers. It if can't be fixed it should at least be removed. Ivan -- Bad user karma. -- BOFH excuse #7 ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-09 9:44 ` Ivan Kanis @ 2014-02-09 17:16 ` Eli Zaretskii 2014-02-10 21:12 ` Ivan Kanis 0 siblings, 1 reply; 18+ messages in thread From: Eli Zaretskii @ 2014-02-09 17:16 UTC (permalink / raw) To: Ivan Kanis; +Cc: 16697 > From: Ivan Kanis <ivan@kanis.fr> > Cc: 16697@debbugs.gnu.org > Date: Sun, 09 Feb 2014 10:44:06 +0100 > > February, 08 at 23:03 Eli wrote: > > >> From: Ivan Kanis <ivan@kanis.fr> > >> Date: Sat, 08 Feb 2014 21:53:47 +0100 > >> > >> 1) emacs -Q > >> 2) eval (setq erc-modules '(scrolltobottom)) in *scratch* > >> 3) M-x erc RET RET RET > >> > >> Wait for the window to fill up. > >> > >> I expect the prompt to stay at the bottom as it used to in 24.3. > > > > Does it help to set scroll-conservatively to a value larger than 100? > > Hi Eli, > > Of course it 'works' but it's global for all buffers. After years of > conservative scroll set to 0 I am somewhat used to it. I have set it to > 101 on my configuration to see if it's nice. > > This module did The Right Thing just for ERC buffers. It if can't be > fixed it should at least be removed. Sorry, I didn't mean to suggest that you should turn on scroll-conservatively, I just wanted to see what causes recentering. However, now that I tried your recipe, I see that Emacs 24.3 also recenters, like the current trunk. If I then type RET at the "ERC>" prompt, the display is scrolled so that the last non-empty line is indeed at the bottom of the window. I think this is expected, given that scrolltobottom works off the post-command-hook, no? Are you sure that Emacs 24.3 behaves differently here? Did you perhaps use in Emacs 24.3 erc that is different from the one which was supplied with the release tarball? ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-09 17:16 ` Eli Zaretskii @ 2014-02-10 21:12 ` Ivan Kanis 2014-02-11 3:51 ` Eli Zaretskii 0 siblings, 1 reply; 18+ messages in thread From: Ivan Kanis @ 2014-02-10 21:12 UTC (permalink / raw) To: Eli Zaretskii; +Cc: 16697 February, 09 at 19:16 Eli wrote: >> From: Ivan Kanis <ivan@kanis.fr> >> Cc: 16697@debbugs.gnu.org >> Date: Sun, 09 Feb 2014 10:44:06 +0100 >> >> February, 08 at 23:03 Eli wrote: >> >> >> From: Ivan Kanis <ivan@kanis.fr> >> >> Date: Sat, 08 Feb 2014 21:53:47 +0100 >> >> >> >> 1) emacs -Q >> >> 2) eval (setq erc-modules '(scrolltobottom)) in *scratch* >> >> 3) M-x erc RET RET RET >> >> >> >> Wait for the window to fill up. >> >> >> >> I expect the prompt to stay at the bottom as it used to in 24.3. >> > >> > Does it help to set scroll-conservatively to a value larger than 100? >> >> Hi Eli, >> >> Of course it 'works' but it's global for all buffers. After years of >> conservative scroll set to 0 I am somewhat used to it. I have set it to >> 101 on my configuration to see if it's nice. >> >> This module did The Right Thing just for ERC buffers. It if can't be >> fixed it should at least be removed. > > Sorry, I didn't mean to suggest that you should turn on > scroll-conservatively, I just wanted to see what causes recentering. > > However, now that I tried your recipe, I see that Emacs 24.3 also > recenters, like the current trunk. If I then type RET at the "ERC>" > prompt, the display is scrolled so that the last non-empty line is > indeed at the bottom of the window. > > I think this is expected, given that scrolltobottom works off the > post-command-hook, no? > > Are you sure that Emacs 24.3 behaves differently here? Did you > perhaps use in Emacs 24.3 erc that is different from the one which was > supplied with the release tarball? I tested on 24.3 and 24.2 and it does recenter. I am sure this feature worked at some point but can't recall when. I can try further previous versions if you wish. When I type RET at the prompt I get an error message saying I can't send an empty line. It errors "Blank line - ignoring" in the echo area. However the display does not scroll up for me. -- Things unattempted yet in prose or rhyme. -- John Milton ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-10 21:12 ` Ivan Kanis @ 2014-02-11 3:51 ` Eli Zaretskii 2014-02-11 9:18 ` Ivan Kanis 0 siblings, 1 reply; 18+ messages in thread From: Eli Zaretskii @ 2014-02-11 3:51 UTC (permalink / raw) To: Ivan Kanis; +Cc: 16697 > From: Ivan Kanis <ivan@kanis.fr> > Cc: 16697@debbugs.gnu.org > Date: Mon, 10 Feb 2014 22:12:19 +0100 > > > However, now that I tried your recipe, I see that Emacs 24.3 also > > recenters, like the current trunk. If I then type RET at the "ERC>" > > prompt, the display is scrolled so that the last non-empty line is > > indeed at the bottom of the window. > > > > I think this is expected, given that scrolltobottom works off the > > post-command-hook, no? > > > > Are you sure that Emacs 24.3 behaves differently here? Did you > > perhaps use in Emacs 24.3 erc that is different from the one which was > > supplied with the release tarball? > > I tested on 24.3 and 24.2 and it does recenter. I am sure this feature > worked at some point but can't recall when. I can try further previous > versions if you wish. I think it "worked" when scrolltobottom used window-scroll-functions, see bug #11697. > When I type RET at the prompt I get an error message saying I can't send > an empty line. It errors "Blank line - ignoring" in the echo area. > However the display does not scroll up for me. No, I meant if the last line is not at the bottom of the window, typing just RET will scroll it to the bottom, because the post-command-hook will kick in. So I guess this feature expects an improvement that would put the last line at the bottom even if no command was invoked by the user. ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-11 3:51 ` Eli Zaretskii @ 2014-02-11 9:18 ` Ivan Kanis 2014-02-11 16:37 ` Eli Zaretskii 0 siblings, 1 reply; 18+ messages in thread From: Ivan Kanis @ 2014-02-11 9:18 UTC (permalink / raw) To: Eli Zaretskii; +Cc: 16697 Hi Eli, I have set scroll-conservatively to 101. Unfortunately I see ERC buffer still recenters for some reason. February, 11 at 5:51 Eli wrote: >> When I type RET at the prompt I get an error message saying I can't send >> an empty line. It errors "Blank line - ignoring" in the echo area. >> However the display does not scroll up for me. > > No, I meant if the last line is not at the bottom of the window, > typing just RET will scroll it to the bottom, because the > post-command-hook will kick in. > > So I guess this feature expects an improvement that would put the last > line at the bottom even if no command was invoked by the user. It does not do that for me. I just get the error, the ERC prompt stays in the middle. ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-11 9:18 ` Ivan Kanis @ 2014-02-11 16:37 ` Eli Zaretskii 2014-02-11 17:14 ` Ivan Kanis 0 siblings, 1 reply; 18+ messages in thread From: Eli Zaretskii @ 2014-02-11 16:37 UTC (permalink / raw) To: Ivan Kanis; +Cc: 16697 > From: Ivan Kanis <ivan@kanis.fr> > Cc: 16697@debbugs.gnu.org > Date: Tue, 11 Feb 2014 10:18:32 +0100 > > I have set scroll-conservatively to 101. Unfortunately I see ERC buffer > still recenters for some reason. From "emacs -Q"? If so, please show a complete recipe, because I cannot reproduce this. (Of course, you can only have the last line at the bottom of the window once you have enough stuff in the buffer to fill the window, but I assume you have accounted for that.) > February, 11 at 5:51 Eli wrote: > > >> When I type RET at the prompt I get an error message saying I can't send > >> an empty line. It errors "Blank line - ignoring" in the echo area. > >> However the display does not scroll up for me. > > > > No, I meant if the last line is not at the bottom of the window, > > typing just RET will scroll it to the bottom, because the > > post-command-hook will kick in. > > > > So I guess this feature expects an improvement that would put the last > > line at the bottom even if no command was invoked by the user. > > It does not do that for me. I just get the error, the ERC prompt stays > in the middle. Again, is that in "emacs -Q"? If not, please try "emacs -Q". Here's what I did: emacs -Q M-: (setq erc-modules '(scrolltobottom)) RET M-x erc RET RET RET RET RET Then I wait for enough stuff to arrive that Emacs recenters, and hit RET one more time. At this point, the last line is scrolled to the bottom of the window. ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-11 16:37 ` Eli Zaretskii @ 2014-02-11 17:14 ` Ivan Kanis 2014-02-11 21:44 ` Josh 0 siblings, 1 reply; 18+ messages in thread From: Ivan Kanis @ 2014-02-11 17:14 UTC (permalink / raw) To: Eli Zaretskii; +Cc: 16697 February, 11 at 18:37 Eli wrote: >> From: Ivan Kanis <ivan@kanis.fr> >> Cc: 16697@debbugs.gnu.org >> Date: Tue, 11 Feb 2014 10:18:32 +0100 >> >> I have set scroll-conservatively to 101. Unfortunately I see ERC buffer >> still recenters for some reason. > >>From "emacs -Q"? No it wasn't. It was going back and forth between other buffers and the ERC buffer. > If so, please show a complete recipe, because I > cannot reproduce this. (Of course, you can only have the last line at > the bottom of the window once you have enough stuff in the buffer to > fill the window, but I assume you have accounted for that.) Of course I account for enough line :) >> February, 11 at 5:51 Eli wrote: >> >> >> When I type RET at the prompt I get an error message saying I can't send >> >> an empty line. It errors "Blank line - ignoring" in the echo area. >> >> However the display does not scroll up for me. >> > >> > No, I meant if the last line is not at the bottom of the window, >> > typing just RET will scroll it to the bottom, because the >> > post-command-hook will kick in. >> > >> > So I guess this feature expects an improvement that would put the last >> > line at the bottom even if no command was invoked by the user. >> >> It does not do that for me. I just get the error, the ERC prompt stays >> in the middle. > > Again, is that in "emacs -Q"? If not, please try "emacs -Q". Here's > what I did: > > emacs -Q > M-: (setq erc-modules '(scrolltobottom)) RET > M-x erc RET RET RET RET RET > > Then I wait for enough stuff to arrive that Emacs recenters, and hit > RET one more time. At this point, the last line is scrolled to the > bottom of the window. I see it now. It worked without hitting RET before which would be ideal. Ivan -- A little detective work revealed that, as is usually the case when you encounter something shoddy in the vicinity of a computer, Microsoft incompetence and gratuitous incompatibility were to blame. -- John Walker ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-11 17:14 ` Ivan Kanis @ 2014-02-11 21:44 ` Josh 2014-02-11 21:56 ` Glenn Morris 0 siblings, 1 reply; 18+ messages in thread From: Josh @ 2014-02-11 21:44 UTC (permalink / raw) To: Ivan Kanis; +Cc: 16697 On Tue, Feb 11, 2014 at 9:14 AM, Ivan Kanis <ivan@kanis.fr> wrote: > February, 11 at 18:37 Eli wrote: >> Then I wait for enough stuff to arrive that Emacs recenters, and hit >> RET one more time. At this point, the last line is scrolled to the >> bottom of the window. > > I see it now. It worked without hitting RET before which would be ideal. This was previously discussed at [0], including a reference[1] to the commit that changed the behavior. [0] http://lists.gnu.org/archive/html/bug-gnu-emacs/2012-06/msg00353.html [1] http://git.savannah.gnu.org/cgit/emacs.git/commit/lisp/erc/erc-goodies.el?id=a1d63e03c3eda51dcec158d6027adf9dbdcfd8dd ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-11 21:44 ` Josh @ 2014-02-11 21:56 ` Glenn Morris 2014-02-12 19:13 ` Ivan Kanis 0 siblings, 1 reply; 18+ messages in thread From: Glenn Morris @ 2014-02-11 21:56 UTC (permalink / raw) To: Josh; +Cc: Ivan Kanis, 16697 Josh wrote: > This was previously discussed at [0], Ie, http://debbugs.gnu.org/cgi/bugreport.cgi?bug=11697 which was closed by the opener of this current bug report, after he disconnected it from http://debbugs.gnu.org/cgi/bugreport.cgi?bug=14573 which is an identical duplicate of this current report. It's not clear to me what the logic is here. ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-11 21:56 ` Glenn Morris @ 2014-02-12 19:13 ` Ivan Kanis 2015-12-27 21:24 ` Lars Ingebrigtsen 0 siblings, 1 reply; 18+ messages in thread From: Ivan Kanis @ 2014-02-12 19:13 UTC (permalink / raw) To: Glenn Morris; +Cc: Josh, 16697 February, 11 at 16:56 Glenn wrote: > Josh wrote: > >> This was previously discussed at [0], > > Ie, http://debbugs.gnu.org/cgi/bugreport.cgi?bug=11697 > > which was closed by the opener of this current bug report, > after he disconnected it from > > http://debbugs.gnu.org/cgi/bugreport.cgi?bug=14573 > > which is an identical duplicate of this current report. > > It's not clear to me what the logic is here. Nor to me. I didn't get e-mail for #11697 because the author was not me. I stated that #14573 was not a duplicate of #11967 for reasons I don't remember. I closed #11697 but I can't recall why. I apologize for being a flake and wasting people's time. Ivan -- Browser's cookie is corrupted. Someone's been nibbling on it. -- BOFH excuse #4 ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2014-02-12 19:13 ` Ivan Kanis @ 2015-12-27 21:24 ` Lars Ingebrigtsen 2015-12-28 19:09 ` bug#11697: " Ivan Kanis 2015-12-28 19:11 ` Ivan Kanis 0 siblings, 2 replies; 18+ messages in thread From: Lars Ingebrigtsen @ 2015-12-27 21:24 UTC (permalink / raw) To: Ivan Kanis; +Cc: 11697, 16697, Josh It's unclear what the conclusion of these bug reports were. Was this fixed or does the problem remain? -- (domestic pets only, the antidote for overdose, milk.) bloggy blog: http://lars.ingebrigtsen.no ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#11697: bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2015-12-27 21:24 ` Lars Ingebrigtsen @ 2015-12-28 19:09 ` Ivan Kanis 2016-02-04 6:12 ` Lars Ingebrigtsen 2015-12-28 19:11 ` Ivan Kanis 1 sibling, 1 reply; 18+ messages in thread From: Ivan Kanis @ 2015-12-28 19:09 UTC (permalink / raw) To: Lars Ingebrigtsen; +Cc: 11697, 16697, Josh Hi Lars, The problem remains. December, 27 at 22:24 Lars wrote: > It's unclear what the conclusion of these bug reports were. Was this > fixed or does the problem remain? -- At Group L, Stoffel oversees six first-rate programmers, a managerial challenge roughly comparable to herding cats. -- Anonymous , 1985-06-09 , The Washington Post ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#11697: bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2015-12-28 19:09 ` bug#11697: " Ivan Kanis @ 2016-02-04 6:12 ` Lars Ingebrigtsen 2016-02-04 20:51 ` Ivan Kanis 0 siblings, 1 reply; 18+ messages in thread From: Lars Ingebrigtsen @ 2016-02-04 6:12 UTC (permalink / raw) To: Ivan Kanis; +Cc: 11697, 16697, Josh Ivan Kanis <ivan@kanis.fr> writes: > Hi Lars, > > The problem remains. Ok, I've done some further reading of the many threads and references here, and I'm still not quite sure what the bug is. :-) Do you have a recipe starting from emacs -Q that demonstrates what happens, and could you describe what you wanted to have happen instead? -- (domestic pets only, the antidote for overdose, milk.) bloggy blog: http://lars.ingebrigtsen.no ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2016-02-04 6:12 ` Lars Ingebrigtsen @ 2016-02-04 20:51 ` Ivan Kanis 2019-10-23 9:57 ` bug#11697: " Lars Ingebrigtsen 0 siblings, 1 reply; 18+ messages in thread From: Ivan Kanis @ 2016-02-04 20:51 UTC (permalink / raw) To: Lars Ingebrigtsen; +Cc: 11697, 16697, Josh [-- Attachment #1: Type: text/plain, Size: 874 bytes --] February, 04 at 17:12 Lars wrote: > Ivan Kanis <ivan@kanis.fr> writes: > >> Hi Lars, >> >> The problem remains. > > Ok, I've done some further reading of the many threads and references > here, and I'm still not quite sure what the bug is. :-) > > Do you have a recipe starting from emacs -Q that demonstrates what > happens, and could you describe what you wanted to have happen instead? Hi Lars, It's very easy to reproduce. I am running a month old master (git 384cf23). emacs -Q 1) evaluate (setq erc-modules '(scrolltobottom)) 2) M-x erc 3) select default values 4) /j #emacs 5) wait for the buffer to fill up I expect the prompt line to stay at the bottom. It jumps back to the middle. I have attached a picture. See the ERC> prompt with the blue background? It jumped back to the middle. I wish you a very productive month of hacking ;) Take care, Ivan [-- Attachment #2: 2016-02-04-214423_755x725_scrot.png --] [-- Type: image/png, Size: 91398 bytes --] ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#11697: bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2016-02-04 20:51 ` Ivan Kanis @ 2019-10-23 9:57 ` Lars Ingebrigtsen 0 siblings, 0 replies; 18+ messages in thread From: Lars Ingebrigtsen @ 2019-10-23 9:57 UTC (permalink / raw) To: Ivan Kanis; +Cc: 28839, 11697, 16697, Josh Ivan Kanis <ivan@kanis.fr> writes: > emacs -Q > > 1) evaluate (setq erc-modules '(scrolltobottom)) > 2) M-x erc > 3) select default values > 4) /j #emacs > 5) wait for the buffer to fill up > > I expect the prompt line to stay at the bottom. > > It jumps back to the middle. This was a bit convoluted to fix, as none of the hooks erc had could be used, as they're called while saving too many excursions. (Well, I could have rewritten the erc-scroll-to-bottom function to not use `recenter' at all, which may have been a better idea, come to think of it.) But I fixed it a different way, so that now point is kept at the end of the buffer (if the window is selected). -- (domestic pets only, the antidote for overdose, milk.) bloggy blog: http://lars.ingebrigtsen.no ^ permalink raw reply [flat|nested] 18+ messages in thread
* bug#11697: bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore 2015-12-27 21:24 ` Lars Ingebrigtsen 2015-12-28 19:09 ` bug#11697: " Ivan Kanis @ 2015-12-28 19:11 ` Ivan Kanis 1 sibling, 0 replies; 18+ messages in thread From: Ivan Kanis @ 2015-12-28 19:11 UTC (permalink / raw) To: Lars Ingebrigtsen; +Cc: 11697, 16697, Josh December, 27 at 22:24 Lars wrote: > It's unclear what the conclusion of these bug reports were. Was this > fixed or does the problem remain? I forgot to mention I am running on a recent master: 7e9da9f [8 weeks ago] ; Shorten TODO list in file-notify-tests.el [Michael Albinus] -- In this world nothing can be said to be certain, except death and taxes. -- Benjamin Franklin ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2019-10-23 9:57 UTC | newest] Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-02-08 20:53 bug#16697: 24.3.50; ERC scrolltobottom module does not work anymore Ivan Kanis 2014-02-08 21:03 ` Eli Zaretskii 2014-02-09 9:44 ` Ivan Kanis 2014-02-09 17:16 ` Eli Zaretskii 2014-02-10 21:12 ` Ivan Kanis 2014-02-11 3:51 ` Eli Zaretskii 2014-02-11 9:18 ` Ivan Kanis 2014-02-11 16:37 ` Eli Zaretskii 2014-02-11 17:14 ` Ivan Kanis 2014-02-11 21:44 ` Josh 2014-02-11 21:56 ` Glenn Morris 2014-02-12 19:13 ` Ivan Kanis 2015-12-27 21:24 ` Lars Ingebrigtsen 2015-12-28 19:09 ` bug#11697: " Ivan Kanis 2016-02-04 6:12 ` Lars Ingebrigtsen 2016-02-04 20:51 ` Ivan Kanis 2019-10-23 9:57 ` bug#11697: " Lars Ingebrigtsen 2015-12-28 19:11 ` Ivan Kanis
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).
![[-- Attachment #2: 2016-02-04-214423_755x725_scrot.png --] [-- Type: image/png, Size: 91398 bytes --]](../../87powcurlk.fsf@kanis.fr/2-2016-02-04-214423_755x725_scrot.png){kind=link}