* bug#20266: Emacs doesn't respond when editing the attached c header file.
@ 2015-04-06 10:09 张海君
[not found] ` <mailman.71.1428315070.904.bug-gnu-emacs@gnu.org>
0 siblings, 1 reply; 5+ messages in thread
From: 张海君 @ 2015-04-06 10:09 UTC (permalink / raw)
To: 20266
[-- Attachment #1: Type: text/plain, Size: 350 bytes --]
Emacs doesn't respond when editing the attached c header file.
Emacs version: 24.4.
------------------------------------
Run emacs with "emacs -Q test.h".
M-x mark-whole-buffer
M-x kill-ring-save
M-x end-of-buffer
M-x yank
Then emacs doesn't respond for about 5 seconds.
M-x scroll-down-command.
Then emacs doesn't respond for about 5 seconds too.
[-- Attachment #2: test.h --]
[-- Type: application/octet-stream, Size: 91775 bytes --]
/*
* wm8904.h -- WM8904 ASoC driver
*
* Copyright 2009 Wolfson Microelectronics, plc
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _WM8904_H
#define _WM8904_H
#define WM8904_CLK_MCLK 1
#define WM8904_CLK_FLL 2
#define WM8904_FLL_MCLK 1
#define WM8904_FLL_BCLK 2
#define WM8904_FLL_LRCLK 3
#define WM8904_FLL_FREE_RUNNING 4
/*
* Register values.
*/
#define WM8904_SW_RESET_AND_ID 0x00
#define WM8904_REVISION 0x01
#define WM8904_BIAS_CONTROL_0 0x04
#define WM8904_VMID_CONTROL_0 0x05
#define WM8904_MIC_BIAS_CONTROL_0 0x06
#define WM8904_MIC_BIAS_CONTROL_1 0x07
#define WM8904_ANALOGUE_DAC_0 0x08
#define WM8904_MIC_FILTER_CONTROL 0x09
#define WM8904_ANALOGUE_ADC_0 0x0A
#define WM8904_POWER_MANAGEMENT_0 0x0C
#define WM8904_POWER_MANAGEMENT_2 0x0E
#define WM8904_POWER_MANAGEMENT_3 0x0F
#define WM8904_POWER_MANAGEMENT_6 0x12
#define WM8904_CLOCK_RATES_0 0x14
#define WM8904_CLOCK_RATES_1 0x15
#define WM8904_CLOCK_RATES_2 0x16
#define WM8904_AUDIO_INTERFACE_0 0x18
#define WM8904_AUDIO_INTERFACE_1 0x19
#define WM8904_AUDIO_INTERFACE_2 0x1A
#define WM8904_AUDIO_INTERFACE_3 0x1B
#define WM8904_DAC_DIGITAL_VOLUME_LEFT 0x1E
#define WM8904_DAC_DIGITAL_VOLUME_RIGHT 0x1F
#define WM8904_DAC_DIGITAL_0 0x20
#define WM8904_DAC_DIGITAL_1 0x21
#define WM8904_ADC_DIGITAL_VOLUME_LEFT 0x24
#define WM8904_ADC_DIGITAL_VOLUME_RIGHT 0x25
#define WM8904_ADC_DIGITAL_0 0x26
#define WM8904_DIGITAL_MICROPHONE_0 0x27
#define WM8904_DRC_0 0x28
#define WM8904_DRC_1 0x29
#define WM8904_DRC_2 0x2A
#define WM8904_DRC_3 0x2B
#define WM8904_ANALOGUE_LEFT_INPUT_0 0x2C
#define WM8904_ANALOGUE_RIGHT_INPUT_0 0x2D
#define WM8904_ANALOGUE_LEFT_INPUT_1 0x2E
#define WM8904_ANALOGUE_RIGHT_INPUT_1 0x2F
#define WM8904_ANALOGUE_OUT1_LEFT 0x39
#define WM8904_ANALOGUE_OUT1_RIGHT 0x3A
#define WM8904_ANALOGUE_OUT2_LEFT 0x3B
#define WM8904_ANALOGUE_OUT2_RIGHT 0x3C
#define WM8904_ANALOGUE_OUT12_ZC 0x3D
#define WM8904_DC_SERVO_0 0x43
#define WM8904_DC_SERVO_1 0x44
#define WM8904_DC_SERVO_2 0x45
#define WM8904_DC_SERVO_4 0x47
#define WM8904_DC_SERVO_5 0x48
#define WM8904_DC_SERVO_6 0x49
#define WM8904_DC_SERVO_7 0x4A
#define WM8904_DC_SERVO_8 0x4B
#define WM8904_DC_SERVO_9 0x4C
#define WM8904_DC_SERVO_READBACK_0 0x4D
#define WM8904_ANALOGUE_HP_0 0x5A
#define WM8904_ANALOGUE_LINEOUT_0 0x5E
#define WM8904_CHARGE_PUMP_0 0x62
#define WM8904_CLASS_W_0 0x68
#define WM8904_WRITE_SEQUENCER_0 0x6C
#define WM8904_WRITE_SEQUENCER_1 0x6D
#define WM8904_WRITE_SEQUENCER_2 0x6E
#define WM8904_WRITE_SEQUENCER_3 0x6F
#define WM8904_WRITE_SEQUENCER_4 0x70
#define WM8904_FLL_CONTROL_1 0x74
#define WM8904_FLL_CONTROL_2 0x75
#define WM8904_FLL_CONTROL_3 0x76
#define WM8904_FLL_CONTROL_4 0x77
#define WM8904_FLL_CONTROL_5 0x78
#define WM8904_GPIO_CONTROL_1 0x79
#define WM8904_GPIO_CONTROL_2 0x7A
#define WM8904_GPIO_CONTROL_3 0x7B
#define WM8904_GPIO_CONTROL_4 0x7C
#define WM8904_DIGITAL_PULLS 0x7E
#define WM8904_INTERRUPT_STATUS 0x7F
#define WM8904_INTERRUPT_STATUS_MASK 0x80
#define WM8904_INTERRUPT_POLARITY 0x81
#define WM8904_INTERRUPT_DEBOUNCE 0x82
#define WM8904_EQ1 0x86
#define WM8904_EQ2 0x87
#define WM8904_EQ3 0x88
#define WM8904_EQ4 0x89
#define WM8904_EQ5 0x8A
#define WM8904_EQ6 0x8B
#define WM8904_EQ7 0x8C
#define WM8904_EQ8 0x8D
#define WM8904_EQ9 0x8E
#define WM8904_EQ10 0x8F
#define WM8904_EQ11 0x90
#define WM8904_EQ12 0x91
#define WM8904_EQ13 0x92
#define WM8904_EQ14 0x93
#define WM8904_EQ15 0x94
#define WM8904_EQ16 0x95
#define WM8904_EQ17 0x96
#define WM8904_EQ18 0x97
#define WM8904_EQ19 0x98
#define WM8904_EQ20 0x99
#define WM8904_EQ21 0x9A
#define WM8904_EQ22 0x9B
#define WM8904_EQ23 0x9C
#define WM8904_EQ24 0x9D
#define WM8904_CONTROL_INTERFACE_TEST_1 0xA1
#define WM8904_ADC_TEST_0 0xC6
#define WM8904_ANALOGUE_OUTPUT_BIAS_0 0xCC
#define WM8904_FLL_NCO_TEST_0 0xF7
#define WM8904_FLL_NCO_TEST_1 0xF8
#define WM8904_REGISTER_COUNT 101
#define WM8904_MAX_REGISTER 0xF8
/*
* Field Definitions.
*/
/*
* R0 (0x00) - SW Reset and ID
*/
#define WM8904_SW_RST_DEV_ID1_MASK 0xFFFF /* SW_RST_DEV_ID1 - [15:0] */
#define WM8904_SW_RST_DEV_ID1_SHIFT 0 /* SW_RST_DEV_ID1 - [15:0] */
#define WM8904_SW_RST_DEV_ID1_WIDTH 16 /* SW_RST_DEV_ID1 - [15:0] */
/*
* R1 (0x01) - Revision
*/
#define WM8904_REVISION_MASK 0x000F /* REVISION - [3:0] */
#define WM8904_REVISION_SHIFT 0 /* REVISION - [3:0] */
#define WM8904_REVISION_WIDTH 16 /* REVISION - [3:0] */
/*
* R4 (0x04) - Bias Control 0
*/
#define WM8904_POBCTRL 0x0010 /* POBCTRL */
#define WM8904_POBCTRL_MASK 0x0010 /* POBCTRL */
#define WM8904_POBCTRL_SHIFT 4 /* POBCTRL */
#define WM8904_POBCTRL_WIDTH 1 /* POBCTRL */
#define WM8904_ISEL_MASK 0x000C /* ISEL - [3:2] */
#define WM8904_ISEL_SHIFT 2 /* ISEL - [3:2] */
#define WM8904_ISEL_WIDTH 2 /* ISEL - [3:2] */
#define WM8904_STARTUP_BIAS_ENA 0x0002 /* STARTUP_BIAS_ENA */
#define WM8904_STARTUP_BIAS_ENA_MASK 0x0002 /* STARTUP_BIAS_ENA */
#define WM8904_STARTUP_BIAS_ENA_SHIFT 1 /* STARTUP_BIAS_ENA */
#define WM8904_STARTUP_BIAS_ENA_WIDTH 1 /* STARTUP_BIAS_ENA */
#define WM8904_BIAS_ENA 0x0001 /* BIAS_ENA */
#define WM8904_BIAS_ENA_MASK 0x0001 /* BIAS_ENA */
#define WM8904_BIAS_ENA_SHIFT 0 /* BIAS_ENA */
#define WM8904_BIAS_ENA_WIDTH 1 /* BIAS_ENA */
/*
* R5 (0x05) - VMID Control 0
*/
#define WM8904_VMID_BUF_ENA 0x0040 /* VMID_BUF_ENA */
#define WM8904_VMID_BUF_ENA_MASK 0x0040 /* VMID_BUF_ENA */
#define WM8904_VMID_BUF_ENA_SHIFT 6 /* VMID_BUF_ENA */
#define WM8904_VMID_BUF_ENA_WIDTH 1 /* VMID_BUF_ENA */
#define WM8904_VMID_RES_MASK 0x0006 /* VMID_RES - [2:1] */
#define WM8904_VMID_RES_SHIFT 1 /* VMID_RES - [2:1] */
#define WM8904_VMID_RES_WIDTH 2 /* VMID_RES - [2:1] */
#define WM8904_VMID_ENA 0x0001 /* VMID_ENA */
#define WM8904_VMID_ENA_MASK 0x0001 /* VMID_ENA */
#define WM8904_VMID_ENA_SHIFT 0 /* VMID_ENA */
#define WM8904_VMID_ENA_WIDTH 1 /* VMID_ENA */
/*
* R8 (0x08) - Analogue DAC 0
*/
#define WM8904_DAC_BIAS_SEL_MASK 0x0018 /* DAC_BIAS_SEL - [4:3] */
#define WM8904_DAC_BIAS_SEL_SHIFT 3 /* DAC_BIAS_SEL - [4:3] */
#define WM8904_DAC_BIAS_SEL_WIDTH 2 /* DAC_BIAS_SEL - [4:3] */
#define WM8904_DAC_VMID_BIAS_SEL_MASK 0x0006 /* DAC_VMID_BIAS_SEL - [2:1] */
#define WM8904_DAC_VMID_BIAS_SEL_SHIFT 1 /* DAC_VMID_BIAS_SEL - [2:1] */
#define WM8904_DAC_VMID_BIAS_SEL_WIDTH 2 /* DAC_VMID_BIAS_SEL - [2:1] */
/*
* R9 (0x09) - mic Filter Control
*/
#define WM8904_MIC_DET_SET_THRESHOLD_MASK 0xF000 /* MIC_DET_SET_THRESHOLD - [15:12] */
#define WM8904_MIC_DET_SET_THRESHOLD_SHIFT 12 /* MIC_DET_SET_THRESHOLD - [15:12] */
#define WM8904_MIC_DET_SET_THRESHOLD_WIDTH 4 /* MIC_DET_SET_THRESHOLD - [15:12] */
#define WM8904_MIC_DET_RESET_THRESHOLD_MASK 0x0F00 /* MIC_DET_RESET_THRESHOLD - [11:8] */
#define WM8904_MIC_DET_RESET_THRESHOLD_SHIFT 8 /* MIC_DET_RESET_THRESHOLD - [11:8] */
#define WM8904_MIC_DET_RESET_THRESHOLD_WIDTH 4 /* MIC_DET_RESET_THRESHOLD - [11:8] */
#define WM8904_MIC_SHORT_SET_THRESHOLD_MASK 0x00F0 /* MIC_SHORT_SET_THRESHOLD - [7:4] */
#define WM8904_MIC_SHORT_SET_THRESHOLD_SHIFT 4 /* MIC_SHORT_SET_THRESHOLD - [7:4] */
#define WM8904_MIC_SHORT_SET_THRESHOLD_WIDTH 4 /* MIC_SHORT_SET_THRESHOLD - [7:4] */
#define WM8904_MIC_SHORT_RESET_THRESHOLD_MASK 0x000F /* MIC_SHORT_RESET_THRESHOLD - [3:0] */
#define WM8904_MIC_SHORT_RESET_THRESHOLD_SHIFT 0 /* MIC_SHORT_RESET_THRESHOLD - [3:0] */
#define WM8904_MIC_SHORT_RESET_THRESHOLD_WIDTH 4 /* MIC_SHORT_RESET_THRESHOLD - [3:0] */
/*
* R10 (0x0A) - Analogue ADC 0
*/
#define WM8904_ADC_OSR128 0x0001 /* ADC_OSR128 */
#define WM8904_ADC_OSR128_MASK 0x0001 /* ADC_OSR128 */
#define WM8904_ADC_OSR128_SHIFT 0 /* ADC_OSR128 */
#define WM8904_ADC_OSR128_WIDTH 1 /* ADC_OSR128 */
/*
* R12 (0x0C) - Power Management 0
*/
#define WM8904_INL_ENA 0x0002 /* INL_ENA */
#define WM8904_INL_ENA_MASK 0x0002 /* INL_ENA */
#define WM8904_INL_ENA_SHIFT 1 /* INL_ENA */
#define WM8904_INL_ENA_WIDTH 1 /* INL_ENA */
#define WM8904_INR_ENA 0x0001 /* INR_ENA */
#define WM8904_INR_ENA_MASK 0x0001 /* INR_ENA */
#define WM8904_INR_ENA_SHIFT 0 /* INR_ENA */
#define WM8904_INR_ENA_WIDTH 1 /* INR_ENA */
/*
* R14 (0x0E) - Power Management 2
*/
#define WM8904_HPL_PGA_ENA 0x0002 /* HPL_PGA_ENA */
#define WM8904_HPL_PGA_ENA_MASK 0x0002 /* HPL_PGA_ENA */
#define WM8904_HPL_PGA_ENA_SHIFT 1 /* HPL_PGA_ENA */
#define WM8904_HPL_PGA_ENA_WIDTH 1 /* HPL_PGA_ENA */
#define WM8904_HPR_PGA_ENA 0x0001 /* HPR_PGA_ENA */
#define WM8904_HPR_PGA_ENA_MASK 0x0001 /* HPR_PGA_ENA */
#define WM8904_HPR_PGA_ENA_SHIFT 0 /* HPR_PGA_ENA */
#define WM8904_HPR_PGA_ENA_WIDTH 1 /* HPR_PGA_ENA */
/*
* R15 (0x0F) - Power Management 3
*/
#define WM8904_LINEOUTL_PGA_ENA 0x0002 /* LINEOUTL_PGA_ENA */
#define WM8904_LINEOUTL_PGA_ENA_MASK 0x0002 /* LINEOUTL_PGA_ENA */
#define WM8904_LINEOUTL_PGA_ENA_SHIFT 1 /* LINEOUTL_PGA_ENA */
#define WM8904_LINEOUTL_PGA_ENA_WIDTH 1 /* LINEOUTL_PGA_ENA */
#define WM8904_LINEOUTR_PGA_ENA 0x0001 /* LINEOUTR_PGA_ENA */
#define WM8904_LINEOUTR_PGA_ENA_MASK 0x0001 /* LINEOUTR_PGA_ENA */
#define WM8904_LINEOUTR_PGA_ENA_SHIFT 0 /* LINEOUTR_PGA_ENA */
#define WM8904_LINEOUTR_PGA_ENA_WIDTH 1 /* LINEOUTR_PGA_ENA */
/*
* R18 (0x12) - Power Management 6
*/
#define WM8904_DACL_ENA 0x0008 /* DACL_ENA */
#define WM8904_DACL_ENA_MASK 0x0008 /* DACL_ENA */
#define WM8904_DACL_ENA_SHIFT 3 /* DACL_ENA */
#define WM8904_DACL_ENA_WIDTH 1 /* DACL_ENA */
#define WM8904_DACR_ENA 0x0004 /* DACR_ENA */
#define WM8904_DACR_ENA_MASK 0x0004 /* DACR_ENA */
#define WM8904_DACR_ENA_SHIFT 2 /* DACR_ENA */
#define WM8904_DACR_ENA_WIDTH 1 /* DACR_ENA */
#define WM8904_ADCL_ENA 0x0002 /* ADCL_ENA */
#define WM8904_ADCL_ENA_MASK 0x0002 /* ADCL_ENA */
#define WM8904_ADCL_ENA_SHIFT 1 /* ADCL_ENA */
#define WM8904_ADCL_ENA_WIDTH 1 /* ADCL_ENA */
#define WM8904_ADCR_ENA 0x0001 /* ADCR_ENA */
#define WM8904_ADCR_ENA_MASK 0x0001 /* ADCR_ENA */
#define WM8904_ADCR_ENA_SHIFT 0 /* ADCR_ENA */
#define WM8904_ADCR_ENA_WIDTH 1 /* ADCR_ENA */
/*
* R20 (0x14) - Clock Rates 0
*/
#define WM8904_TOCLK_RATE_DIV16 0x4000 /* TOCLK_RATE_DIV16 */
#define WM8904_TOCLK_RATE_DIV16_MASK 0x4000 /* TOCLK_RATE_DIV16 */
#define WM8904_TOCLK_RATE_DIV16_SHIFT 14 /* TOCLK_RATE_DIV16 */
#define WM8904_TOCLK_RATE_DIV16_WIDTH 1 /* TOCLK_RATE_DIV16 */
#define WM8904_TOCLK_RATE_X4 0x2000 /* TOCLK_RATE_X4 */
#define WM8904_TOCLK_RATE_X4_MASK 0x2000 /* TOCLK_RATE_X4 */
#define WM8904_TOCLK_RATE_X4_SHIFT 13 /* TOCLK_RATE_X4 */
#define WM8904_TOCLK_RATE_X4_WIDTH 1 /* TOCLK_RATE_X4 */
#define WM8904_SR_MODE 0x1000 /* SR_MODE */
#define WM8904_SR_MODE_MASK 0x1000 /* SR_MODE */
#define WM8904_SR_MODE_SHIFT 12 /* SR_MODE */
#define WM8904_SR_MODE_WIDTH 1 /* SR_MODE */
#define WM8904_MCLK_DIV 0x0001 /* MCLK_DIV */
#define WM8904_MCLK_DIV_MASK 0x0001 /* MCLK_DIV */
#define WM8904_MCLK_DIV_SHIFT 0 /* MCLK_DIV */
#define WM8904_MCLK_DIV_WIDTH 1 /* MCLK_DIV */
/*
* R21 (0x15) - Clock Rates 1
*/
#define WM8904_CLK_SYS_RATE_MASK 0x3C00 /* CLK_SYS_RATE - [13:10] */
#define WM8904_CLK_SYS_RATE_SHIFT 10 /* CLK_SYS_RATE - [13:10] */
#define WM8904_CLK_SYS_RATE_WIDTH 4 /* CLK_SYS_RATE - [13:10] */
#define WM8904_SAMPLE_RATE_MASK 0x0007 /* SAMPLE_RATE - [2:0] */
#define WM8904_SAMPLE_RATE_SHIFT 0 /* SAMPLE_RATE - [2:0] */
#define WM8904_SAMPLE_RATE_WIDTH 3 /* SAMPLE_RATE - [2:0] */
/*
* R22 (0x16) - Clock Rates 2
*/
#define WM8904_MCLK_INV 0x8000 /* MCLK_INV */
#define WM8904_MCLK_INV_MASK 0x8000 /* MCLK_INV */
#define WM8904_MCLK_INV_SHIFT 15 /* MCLK_INV */
#define WM8904_MCLK_INV_WIDTH 1 /* MCLK_INV */
#define WM8904_SYSCLK_SRC 0x4000 /* SYSCLK_SRC */
#define WM8904_SYSCLK_SRC_MASK 0x4000 /* SYSCLK_SRC */
#define WM8904_SYSCLK_SRC_SHIFT 14 /* SYSCLK_SRC */
#define WM8904_SYSCLK_SRC_WIDTH 1 /* SYSCLK_SRC */
#define WM8904_TOCLK_RATE 0x1000 /* TOCLK_RATE */
#define WM8904_TOCLK_RATE_MASK 0x1000 /* TOCLK_RATE */
#define WM8904_TOCLK_RATE_SHIFT 12 /* TOCLK_RATE */
#define WM8904_TOCLK_RATE_WIDTH 1 /* TOCLK_RATE */
#define WM8904_OPCLK_ENA 0x0008 /* OPCLK_ENA */
#define WM8904_OPCLK_ENA_MASK 0x0008 /* OPCLK_ENA */
#define WM8904_OPCLK_ENA_SHIFT 3 /* OPCLK_ENA */
#define WM8904_OPCLK_ENA_WIDTH 1 /* OPCLK_ENA */
#define WM8904_CLK_SYS_ENA 0x0004 /* CLK_SYS_ENA */
#define WM8904_CLK_SYS_ENA_MASK 0x0004 /* CLK_SYS_ENA */
#define WM8904_CLK_SYS_ENA_SHIFT 2 /* CLK_SYS_ENA */
#define WM8904_CLK_SYS_ENA_WIDTH 1 /* CLK_SYS_ENA */
#define WM8904_CLK_DSP_ENA 0x0002 /* CLK_DSP_ENA */
#define WM8904_CLK_DSP_ENA_MASK 0x0002 /* CLK_DSP_ENA */
#define WM8904_CLK_DSP_ENA_SHIFT 1 /* CLK_DSP_ENA */
#define WM8904_CLK_DSP_ENA_WIDTH 1 /* CLK_DSP_ENA */
#define WM8904_TOCLK_ENA 0x0001 /* TOCLK_ENA */
#define WM8904_TOCLK_ENA_MASK 0x0001 /* TOCLK_ENA */
#define WM8904_TOCLK_ENA_SHIFT 0 /* TOCLK_ENA */
#define WM8904_TOCLK_ENA_WIDTH 1 /* TOCLK_ENA */
/*
* R24 (0x18) - Audio Interface 0
*/
#define WM8904_DACL_DATINV 0x1000 /* DACL_DATINV */
#define WM8904_DACL_DATINV_MASK 0x1000 /* DACL_DATINV */
#define WM8904_DACL_DATINV_SHIFT 12 /* DACL_DATINV */
#define WM8904_DACL_DATINV_WIDTH 1 /* DACL_DATINV */
#define WM8904_DACR_DATINV 0x0800 /* DACR_DATINV */
#define WM8904_DACR_DATINV_MASK 0x0800 /* DACR_DATINV */
#define WM8904_DACR_DATINV_SHIFT 11 /* DACR_DATINV */
#define WM8904_DACR_DATINV_WIDTH 1 /* DACR_DATINV */
#define WM8904_DAC_BOOST_MASK 0x0600 /* DAC_BOOST - [10:9] */
#define WM8904_DAC_BOOST_SHIFT 9 /* DAC_BOOST - [10:9] */
#define WM8904_DAC_BOOST_WIDTH 2 /* DAC_BOOST - [10:9] */
#define WM8904_LOOPBACK 0x0100 /* LOOPBACK */
#define WM8904_LOOPBACK_MASK 0x0100 /* LOOPBACK */
#define WM8904_LOOPBACK_SHIFT 8 /* LOOPBACK */
#define WM8904_LOOPBACK_WIDTH 1 /* LOOPBACK */
#define WM8904_AIFADCL_SRC 0x0080 /* AIFADCL_SRC */
#define WM8904_AIFADCL_SRC_MASK 0x0080 /* AIFADCL_SRC */
#define WM8904_AIFADCL_SRC_SHIFT 7 /* AIFADCL_SRC */
#define WM8904_AIFADCL_SRC_WIDTH 1 /* AIFADCL_SRC */
#define WM8904_AIFADCR_SRC 0x0040 /* AIFADCR_SRC */
#define WM8904_AIFADCR_SRC_MASK 0x0040 /* AIFADCR_SRC */
#define WM8904_AIFADCR_SRC_SHIFT 6 /* AIFADCR_SRC */
#define WM8904_AIFADCR_SRC_WIDTH 1 /* AIFADCR_SRC */
#define WM8904_AIFDACL_SRC 0x0020 /* AIFDACL_SRC */
#define WM8904_AIFDACL_SRC_MASK 0x0020 /* AIFDACL_SRC */
#define WM8904_AIFDACL_SRC_SHIFT 5 /* AIFDACL_SRC */
#define WM8904_AIFDACL_SRC_WIDTH 1 /* AIFDACL_SRC */
#define WM8904_AIFDACR_SRC 0x0010 /* AIFDACR_SRC */
#define WM8904_AIFDACR_SRC_MASK 0x0010 /* AIFDACR_SRC */
#define WM8904_AIFDACR_SRC_SHIFT 4 /* AIFDACR_SRC */
#define WM8904_AIFDACR_SRC_WIDTH 1 /* AIFDACR_SRC */
#define WM8904_ADC_COMP 0x0008 /* ADC_COMP */
#define WM8904_ADC_COMP_MASK 0x0008 /* ADC_COMP */
#define WM8904_ADC_COMP_SHIFT 3 /* ADC_COMP */
#define WM8904_ADC_COMP_WIDTH 1 /* ADC_COMP */
#define WM8904_ADC_COMPMODE 0x0004 /* ADC_COMPMODE */
#define WM8904_ADC_COMPMODE_MASK 0x0004 /* ADC_COMPMODE */
#define WM8904_ADC_COMPMODE_SHIFT 2 /* ADC_COMPMODE */
#define WM8904_ADC_COMPMODE_WIDTH 1 /* ADC_COMPMODE */
#define WM8904_DAC_COMP 0x0002 /* DAC_COMP */
#define WM8904_DAC_COMP_MASK 0x0002 /* DAC_COMP */
#define WM8904_DAC_COMP_SHIFT 1 /* DAC_COMP */
#define WM8904_DAC_COMP_WIDTH 1 /* DAC_COMP */
#define WM8904_DAC_COMPMODE 0x0001 /* DAC_COMPMODE */
#define WM8904_DAC_COMPMODE_MASK 0x0001 /* DAC_COMPMODE */
#define WM8904_DAC_COMPMODE_SHIFT 0 /* DAC_COMPMODE */
#define WM8904_DAC_COMPMODE_WIDTH 1 /* DAC_COMPMODE */
/*
* R25 (0x19) - Audio Interface 1
*/
#define WM8904_AIFDAC_TDM 0x2000 /* AIFDAC_TDM */
#define WM8904_AIFDAC_TDM_MASK 0x2000 /* AIFDAC_TDM */
#define WM8904_AIFDAC_TDM_SHIFT 13 /* AIFDAC_TDM */
#define WM8904_AIFDAC_TDM_WIDTH 1 /* AIFDAC_TDM */
#define WM8904_AIFDAC_TDM_CHAN 0x1000 /* AIFDAC_TDM_CHAN */
#define WM8904_AIFDAC_TDM_CHAN_MASK 0x1000 /* AIFDAC_TDM_CHAN */
#define WM8904_AIFDAC_TDM_CHAN_SHIFT 12 /* AIFDAC_TDM_CHAN */
#define WM8904_AIFDAC_TDM_CHAN_WIDTH 1 /* AIFDAC_TDM_CHAN */
#define WM8904_AIFADC_TDM 0x0800 /* AIFADC_TDM */
#define WM8904_AIFADC_TDM_MASK 0x0800 /* AIFADC_TDM */
#define WM8904_AIFADC_TDM_SHIFT 11 /* AIFADC_TDM */
#define WM8904_AIFADC_TDM_WIDTH 1 /* AIFADC_TDM */
#define WM8904_AIFADC_TDM_CHAN 0x0400 /* AIFADC_TDM_CHAN */
#define WM8904_AIFADC_TDM_CHAN_MASK 0x0400 /* AIFADC_TDM_CHAN */
#define WM8904_AIFADC_TDM_CHAN_SHIFT 10 /* AIFADC_TDM_CHAN */
#define WM8904_AIFADC_TDM_CHAN_WIDTH 1 /* AIFADC_TDM_CHAN */
#define WM8904_AIF_TRIS 0x0100 /* AIF_TRIS */
#define WM8904_AIF_TRIS_MASK 0x0100 /* AIF_TRIS */
#define WM8904_AIF_TRIS_SHIFT 8 /* AIF_TRIS */
#define WM8904_AIF_TRIS_WIDTH 1 /* AIF_TRIS */
#define WM8904_AIF_BCLK_INV 0x0080 /* AIF_BCLK_INV */
#define WM8904_AIF_BCLK_INV_MASK 0x0080 /* AIF_BCLK_INV */
#define WM8904_AIF_BCLK_INV_SHIFT 7 /* AIF_BCLK_INV */
#define WM8904_AIF_BCLK_INV_WIDTH 1 /* AIF_BCLK_INV */
#define WM8904_BCLK_DIR 0x0040 /* BCLK_DIR */
#define WM8904_BCLK_DIR_MASK 0x0040 /* BCLK_DIR */
#define WM8904_BCLK_DIR_SHIFT 6 /* BCLK_DIR */
#define WM8904_BCLK_DIR_WIDTH 1 /* BCLK_DIR */
#define WM8904_AIF_LRCLK_INV 0x0010 /* AIF_LRCLK_INV */
#define WM8904_AIF_LRCLK_INV_MASK 0x0010 /* AIF_LRCLK_INV */
#define WM8904_AIF_LRCLK_INV_SHIFT 4 /* AIF_LRCLK_INV */
#define WM8904_AIF_LRCLK_INV_WIDTH 1 /* AIF_LRCLK_INV */
#define WM8904_AIF_WL_MASK 0x000C /* AIF_WL - [3:2] */
#define WM8904_AIF_WL_SHIFT 2 /* AIF_WL - [3:2] */
#define WM8904_AIF_WL_WIDTH 2 /* AIF_WL - [3:2] */
#define WM8904_AIF_FMT_MASK 0x0003 /* AIF_FMT - [1:0] */
#define WM8904_AIF_FMT_SHIFT 0 /* AIF_FMT - [1:0] */
#define WM8904_AIF_FMT_WIDTH 2 /* AIF_FMT - [1:0] */
/*
* R26 (0x1A) - Audio Interface 2
*/
#define WM8904_OPCLK_DIV_MASK 0x0F00 /* OPCLK_DIV - [11:8] */
#define WM8904_OPCLK_DIV_SHIFT 8 /* OPCLK_DIV - [11:8] */
#define WM8904_OPCLK_DIV_WIDTH 4 /* OPCLK_DIV - [11:8] */
#define WM8904_BCLK_DIV_MASK 0x001F /* BCLK_DIV - [4:0] */
#define WM8904_BCLK_DIV_SHIFT 0 /* BCLK_DIV - [4:0] */
#define WM8904_BCLK_DIV_WIDTH 5 /* BCLK_DIV - [4:0] */
/*
* R27 (0x1B) - Audio Interface 3
*/
#define WM8904_LRCLK_DIR 0x0800 /* LRCLK_DIR */
#define WM8904_LRCLK_DIR_MASK 0x0800 /* LRCLK_DIR */
#define WM8904_LRCLK_DIR_SHIFT 11 /* LRCLK_DIR */
#define WM8904_LRCLK_DIR_WIDTH 1 /* LRCLK_DIR */
#define WM8904_LRCLK_RATE_MASK 0x07FF /* LRCLK_RATE - [10:0] */
#define WM8904_LRCLK_RATE_SHIFT 0 /* LRCLK_RATE - [10:0] */
#define WM8904_LRCLK_RATE_WIDTH 11 /* LRCLK_RATE - [10:0] */
/*
* R30 (0x1E) - DAC Digital Volume Left
*/
#define WM8904_DAC_VU 0x0100 /* DAC_VU */
#define WM8904_DAC_VU_MASK 0x0100 /* DAC_VU */
#define WM8904_DAC_VU_SHIFT 8 /* DAC_VU */
#define WM8904_DAC_VU_WIDTH 1 /* DAC_VU */
#define WM8904_DACL_VOL_MASK 0x00FF /* DACL_VOL - [7:0] */
#define WM8904_DACL_VOL_SHIFT 0 /* DACL_VOL - [7:0] */
#define WM8904_DACL_VOL_WIDTH 8 /* DACL_VOL - [7:0] */
/*
* R31 (0x1F) - DAC Digital Volume Right
*/
#define WM8904_DAC_VU 0x0100 /* DAC_VU */
#define WM8904_DAC_VU_MASK 0x0100 /* DAC_VU */
#define WM8904_DAC_VU_SHIFT 8 /* DAC_VU */
#define WM8904_DAC_VU_WIDTH 1 /* DAC_VU */
#define WM8904_DACR_VOL_MASK 0x00FF /* DACR_VOL - [7:0] */
#define WM8904_DACR_VOL_SHIFT 0 /* DACR_VOL - [7:0] */
#define WM8904_DACR_VOL_WIDTH 8 /* DACR_VOL - [7:0] */
/*
* R32 (0x20) - DAC Digital 0
*/
#define WM8904_ADCL_DAC_SVOL_MASK 0x0F00 /* ADCL_DAC_SVOL - [11:8] */
#define WM8904_ADCL_DAC_SVOL_SHIFT 8 /* ADCL_DAC_SVOL - [11:8] */
#define WM8904_ADCL_DAC_SVOL_WIDTH 4 /* ADCL_DAC_SVOL - [11:8] */
#define WM8904_ADCR_DAC_SVOL_MASK 0x00F0 /* ADCR_DAC_SVOL - [7:4] */
#define WM8904_ADCR_DAC_SVOL_SHIFT 4 /* ADCR_DAC_SVOL - [7:4] */
#define WM8904_ADCR_DAC_SVOL_WIDTH 4 /* ADCR_DAC_SVOL - [7:4] */
#define WM8904_ADC_TO_DACL_MASK 0x000C /* ADC_TO_DACL - [3:2] */
#define WM8904_ADC_TO_DACL_SHIFT 2 /* ADC_TO_DACL - [3:2] */
#define WM8904_ADC_TO_DACL_WIDTH 2 /* ADC_TO_DACL - [3:2] */
#define WM8904_ADC_TO_DACR_MASK 0x0003 /* ADC_TO_DACR - [1:0] */
#define WM8904_ADC_TO_DACR_SHIFT 0 /* ADC_TO_DACR - [1:0] */
#define WM8904_ADC_TO_DACR_WIDTH 2 /* ADC_TO_DACR - [1:0] */
/*
* R33 (0x21) - DAC Digital 1
*/
#define WM8904_DAC_MONO 0x1000 /* DAC_MONO */
#define WM8904_DAC_MONO_MASK 0x1000 /* DAC_MONO */
#define WM8904_DAC_MONO_SHIFT 12 /* DAC_MONO */
#define WM8904_DAC_MONO_WIDTH 1 /* DAC_MONO */
#define WM8904_DAC_SB_FILT 0x0800 /* DAC_SB_FILT */
#define WM8904_DAC_SB_FILT_MASK 0x0800 /* DAC_SB_FILT */
#define WM8904_DAC_SB_FILT_SHIFT 11 /* DAC_SB_FILT */
#define WM8904_DAC_SB_FILT_WIDTH 1 /* DAC_SB_FILT */
#define WM8904_DAC_MUTERATE 0x0400 /* DAC_MUTERATE */
#define WM8904_DAC_MUTERATE_MASK 0x0400 /* DAC_MUTERATE */
#define WM8904_DAC_MUTERATE_SHIFT 10 /* DAC_MUTERATE */
#define WM8904_DAC_MUTERATE_WIDTH 1 /* DAC_MUTERATE */
#define WM8904_DAC_UNMUTE_RAMP 0x0200 /* DAC_UNMUTE_RAMP */
#define WM8904_DAC_UNMUTE_RAMP_MASK 0x0200 /* DAC_UNMUTE_RAMP */
#define WM8904_DAC_UNMUTE_RAMP_SHIFT 9 /* DAC_UNMUTE_RAMP */
#define WM8904_DAC_UNMUTE_RAMP_WIDTH 1 /* DAC_UNMUTE_RAMP */
#define WM8904_DAC_OSR128 0x0040 /* DAC_OSR128 */
#define WM8904_DAC_OSR128_MASK 0x0040 /* DAC_OSR128 */
#define WM8904_DAC_OSR128_SHIFT 6 /* DAC_OSR128 */
#define WM8904_DAC_OSR128_WIDTH 1 /* DAC_OSR128 */
#define WM8904_DAC_MUTE 0x0008 /* DAC_MUTE */
#define WM8904_DAC_MUTE_MASK 0x0008 /* DAC_MUTE */
#define WM8904_DAC_MUTE_SHIFT 3 /* DAC_MUTE */
#define WM8904_DAC_MUTE_WIDTH 1 /* DAC_MUTE */
#define WM8904_DEEMPH_MASK 0x0006 /* DEEMPH - [2:1] */
#define WM8904_DEEMPH_SHIFT 1 /* DEEMPH - [2:1] */
#define WM8904_DEEMPH_WIDTH 2 /* DEEMPH - [2:1] */
/*
* R36 (0x24) - ADC Digital Volume Left
*/
#define WM8904_ADC_VU 0x0100 /* ADC_VU */
#define WM8904_ADC_VU_MASK 0x0100 /* ADC_VU */
#define WM8904_ADC_VU_SHIFT 8 /* ADC_VU */
#define WM8904_ADC_VU_WIDTH 1 /* ADC_VU */
#define WM8904_ADCL_VOL_MASK 0x00FF /* ADCL_VOL - [7:0] */
#define WM8904_ADCL_VOL_SHIFT 0 /* ADCL_VOL - [7:0] */
#define WM8904_ADCL_VOL_WIDTH 8 /* ADCL_VOL - [7:0] */
/*
* R37 (0x25) - ADC Digital Volume Right
*/
#define WM8904_ADC_VU 0x0100 /* ADC_VU */
#define WM8904_ADC_VU_MASK 0x0100 /* ADC_VU */
#define WM8904_ADC_VU_SHIFT 8 /* ADC_VU */
#define WM8904_ADC_VU_WIDTH 1 /* ADC_VU */
#define WM8904_ADCR_VOL_MASK 0x00FF /* ADCR_VOL - [7:0] */
#define WM8904_ADCR_VOL_SHIFT 0 /* ADCR_VOL - [7:0] */
#define WM8904_ADCR_VOL_WIDTH 8 /* ADCR_VOL - [7:0] */
/*
* R38 (0x26) - ADC Digital 0
*/
#define WM8904_ADC_HPF_CUT_MASK 0x0060 /* ADC_HPF_CUT - [6:5] */
#define WM8904_ADC_HPF_CUT_SHIFT 5 /* ADC_HPF_CUT - [6:5] */
#define WM8904_ADC_HPF_CUT_WIDTH 2 /* ADC_HPF_CUT - [6:5] */
#define WM8904_ADC_HPF 0x0010 /* ADC_HPF */
#define WM8904_ADC_HPF_MASK 0x0010 /* ADC_HPF */
#define WM8904_ADC_HPF_SHIFT 4 /* ADC_HPF */
#define WM8904_ADC_HPF_WIDTH 1 /* ADC_HPF */
#define WM8904_ADCL_DATINV 0x0002 /* ADCL_DATINV */
#define WM8904_ADCL_DATINV_MASK 0x0002 /* ADCL_DATINV */
#define WM8904_ADCL_DATINV_SHIFT 1 /* ADCL_DATINV */
#define WM8904_ADCL_DATINV_WIDTH 1 /* ADCL_DATINV */
#define WM8904_ADCR_DATINV 0x0001 /* ADCR_DATINV */
#define WM8904_ADCR_DATINV_MASK 0x0001 /* ADCR_DATINV */
#define WM8904_ADCR_DATINV_SHIFT 0 /* ADCR_DATINV */
#define WM8904_ADCR_DATINV_WIDTH 1 /* ADCR_DATINV */
/*
* R39 (0x27) - Digital Microphone 0
*/
#define WM8904_DMIC_ENA 0x1000 /* DMIC_ENA */
#define WM8904_DMIC_ENA_MASK 0x1000 /* DMIC_ENA */
#define WM8904_DMIC_ENA_SHIFT 12 /* DMIC_ENA */
#define WM8904_DMIC_ENA_WIDTH 1 /* DMIC_ENA */
#define WM8904_DMIC_SRC 0x0800 /* DMIC_SRC */
#define WM8904_DMIC_SRC_MASK 0x0800 /* DMIC_SRC */
#define WM8904_DMIC_SRC_SHIFT 11 /* DMIC_SRC */
#define WM8904_DMIC_SRC_WIDTH 1 /* DMIC_SRC */
/*
* R40 (0x28) - DRC 0
*/
#define WM8904_DRC_ENA 0x8000 /* DRC_ENA */
#define WM8904_DRC_ENA_MASK 0x8000 /* DRC_ENA */
#define WM8904_DRC_ENA_SHIFT 15 /* DRC_ENA */
#define WM8904_DRC_ENA_WIDTH 1 /* DRC_ENA */
#define WM8904_DRC_DAC_PATH 0x4000 /* DRC_DAC_PATH */
#define WM8904_DRC_DAC_PATH_MASK 0x4000 /* DRC_DAC_PATH */
#define WM8904_DRC_DAC_PATH_SHIFT 14 /* DRC_DAC_PATH */
#define WM8904_DRC_DAC_PATH_WIDTH 1 /* DRC_DAC_PATH */
#define WM8904_DRC_GS_HYST_LVL_MASK 0x1800 /* DRC_GS_HYST_LVL - [12:11] */
#define WM8904_DRC_GS_HYST_LVL_SHIFT 11 /* DRC_GS_HYST_LVL - [12:11] */
#define WM8904_DRC_GS_HYST_LVL_WIDTH 2 /* DRC_GS_HYST_LVL - [12:11] */
#define WM8904_DRC_STARTUP_GAIN_MASK 0x07C0 /* DRC_STARTUP_GAIN - [10:6] */
#define WM8904_DRC_STARTUP_GAIN_SHIFT 6 /* DRC_STARTUP_GAIN - [10:6] */
#define WM8904_DRC_STARTUP_GAIN_WIDTH 5 /* DRC_STARTUP_GAIN - [10:6] */
#define WM8904_DRC_FF_DELAY 0x0020 /* DRC_FF_DELAY */
#define WM8904_DRC_FF_DELAY_MASK 0x0020 /* DRC_FF_DELAY */
#define WM8904_DRC_FF_DELAY_SHIFT 5 /* DRC_FF_DELAY */
#define WM8904_DRC_FF_DELAY_WIDTH 1 /* DRC_FF_DELAY */
#define WM8904_DRC_GS_ENA 0x0008 /* DRC_GS_ENA */
#define WM8904_DRC_GS_ENA_MASK 0x0008 /* DRC_GS_ENA */
#define WM8904_DRC_GS_ENA_SHIFT 3 /* DRC_GS_ENA */
#define WM8904_DRC_GS_ENA_WIDTH 1 /* DRC_GS_ENA */
#define WM8904_DRC_QR 0x0004 /* DRC_QR */
#define WM8904_DRC_QR_MASK 0x0004 /* DRC_QR */
#define WM8904_DRC_QR_SHIFT 2 /* DRC_QR */
#define WM8904_DRC_QR_WIDTH 1 /* DRC_QR */
#define WM8904_DRC_ANTICLIP 0x0002 /* DRC_ANTICLIP */
#define WM8904_DRC_ANTICLIP_MASK 0x0002 /* DRC_ANTICLIP */
#define WM8904_DRC_ANTICLIP_SHIFT 1 /* DRC_ANTICLIP */
#define WM8904_DRC_ANTICLIP_WIDTH 1 /* DRC_ANTICLIP */
#define WM8904_DRC_GS_HYST 0x0001 /* DRC_GS_HYST */
#define WM8904_DRC_GS_HYST_MASK 0x0001 /* DRC_GS_HYST */
#define WM8904_DRC_GS_HYST_SHIFT 0 /* DRC_GS_HYST */
#define WM8904_DRC_GS_HYST_WIDTH 1 /* DRC_GS_HYST */
/*
* R41 (0x29) - DRC 1
*/
#define WM8904_DRC_ATK_MASK 0xF000 /* DRC_ATK - [15:12] */
#define WM8904_DRC_ATK_SHIFT 12 /* DRC_ATK - [15:12] */
#define WM8904_DRC_ATK_WIDTH 4 /* DRC_ATK - [15:12] */
#define WM8904_DRC_DCY_MASK 0x0F00 /* DRC_DCY - [11:8] */
#define WM8904_DRC_DCY_SHIFT 8 /* DRC_DCY - [11:8] */
#define WM8904_DRC_DCY_WIDTH 4 /* DRC_DCY - [11:8] */
#define WM8904_DRC_QR_THR_MASK 0x00C0 /* DRC_QR_THR - [7:6] */
#define WM8904_DRC_QR_THR_SHIFT 6 /* DRC_QR_THR - [7:6] */
#define WM8904_DRC_QR_THR_WIDTH 2 /* DRC_QR_THR - [7:6] */
#define WM8904_DRC_QR_DCY_MASK 0x0030 /* DRC_QR_DCY - [5:4] */
#define WM8904_DRC_QR_DCY_SHIFT 4 /* DRC_QR_DCY - [5:4] */
#define WM8904_DRC_QR_DCY_WIDTH 2 /* DRC_QR_DCY - [5:4] */
#define WM8904_DRC_MINGAIN_MASK 0x000C /* DRC_MINGAIN - [3:2] */
#define WM8904_DRC_MINGAIN_SHIFT 2 /* DRC_MINGAIN - [3:2] */
#define WM8904_DRC_MINGAIN_WIDTH 2 /* DRC_MINGAIN - [3:2] */
#define WM8904_DRC_MAXGAIN_MASK 0x0003 /* DRC_MAXGAIN - [1:0] */
#define WM8904_DRC_MAXGAIN_SHIFT 0 /* DRC_MAXGAIN - [1:0] */
#define WM8904_DRC_MAXGAIN_WIDTH 2 /* DRC_MAXGAIN - [1:0] */
/*
* R42 (0x2A) - DRC 2
*/
#define WM8904_DRC_HI_COMP_MASK 0x0038 /* DRC_HI_COMP - [5:3] */
#define WM8904_DRC_HI_COMP_SHIFT 3 /* DRC_HI_COMP - [5:3] */
#define WM8904_DRC_HI_COMP_WIDTH 3 /* DRC_HI_COMP - [5:3] */
#define WM8904_DRC_LO_COMP_MASK 0x0007 /* DRC_LO_COMP - [2:0] */
#define WM8904_DRC_LO_COMP_SHIFT 0 /* DRC_LO_COMP - [2:0] */
#define WM8904_DRC_LO_COMP_WIDTH 3 /* DRC_LO_COMP - [2:0] */
/*
* R43 (0x2B) - DRC 3
*/
#define WM8904_DRC_KNEE_IP_MASK 0x07E0 /* DRC_KNEE_IP - [10:5] */
#define WM8904_DRC_KNEE_IP_SHIFT 5 /* DRC_KNEE_IP - [10:5] */
#define WM8904_DRC_KNEE_IP_WIDTH 6 /* DRC_KNEE_IP - [10:5] */
#define WM8904_DRC_KNEE_OP_MASK 0x001F /* DRC_KNEE_OP - [4:0] */
#define WM8904_DRC_KNEE_OP_SHIFT 0 /* DRC_KNEE_OP - [4:0] */
#define WM8904_DRC_KNEE_OP_WIDTH 5 /* DRC_KNEE_OP - [4:0] */
/*
* R44 (0x2C) - Analogue Left Input 0
*/
#define WM8904_LINMUTE 0x0080 /* LINMUTE */
#define WM8904_LINMUTE_MASK 0x0080 /* LINMUTE */
#define WM8904_LINMUTE_SHIFT 7 /* LINMUTE */
#define WM8904_LINMUTE_WIDTH 1 /* LINMUTE */
#define WM8904_LIN_VOL_MASK 0x001F /* LIN_VOL - [4:0] */
#define WM8904_LIN_VOL_SHIFT 0 /* LIN_VOL - [4:0] */
#define WM8904_LIN_VOL_WIDTH 5 /* LIN_VOL - [4:0] */
/*
* R45 (0x2D) - Analogue Right Input 0
*/
#define WM8904_RINMUTE 0x0080 /* RINMUTE */
#define WM8904_RINMUTE_MASK 0x0080 /* RINMUTE */
#define WM8904_RINMUTE_SHIFT 7 /* RINMUTE */
#define WM8904_RINMUTE_WIDTH 1 /* RINMUTE */
#define WM8904_RIN_VOL_MASK 0x001F /* RIN_VOL - [4:0] */
#define WM8904_RIN_VOL_SHIFT 0 /* RIN_VOL - [4:0] */
#define WM8904_RIN_VOL_WIDTH 5 /* RIN_VOL - [4:0] */
/*
* R46 (0x2E) - Analogue Left Input 1
*/
#define WM8904_INL_CM_ENA 0x0040 /* INL_CM_ENA */
#define WM8904_INL_CM_ENA_MASK 0x0040 /* INL_CM_ENA */
#define WM8904_INL_CM_ENA_SHIFT 6 /* INL_CM_ENA */
#define WM8904_INL_CM_ENA_WIDTH 1 /* INL_CM_ENA */
#define WM8904_L_IP_SEL_N_MASK 0x0030 /* L_IP_SEL_N - [5:4] */
#define WM8904_L_IP_SEL_N_SHIFT 4 /* L_IP_SEL_N - [5:4] */
#define WM8904_L_IP_SEL_N_WIDTH 2 /* L_IP_SEL_N - [5:4] */
#define WM8904_L_IP_SEL_P_MASK 0x000C /* L_IP_SEL_P - [3:2] */
#define WM8904_L_IP_SEL_P_SHIFT 2 /* L_IP_SEL_P - [3:2] */
#define WM8904_L_IP_SEL_P_WIDTH 2 /* L_IP_SEL_P - [3:2] */
#define WM8904_L_MODE_MASK 0x0003 /* L_MODE - [1:0] */
#define WM8904_L_MODE_SHIFT 0 /* L_MODE - [1:0] */
#define WM8904_L_MODE_WIDTH 2 /* L_MODE - [1:0] */
/*
* R47 (0x2F) - Analogue Right Input 1
*/
#define WM8904_INR_CM_ENA 0x0040 /* INR_CM_ENA */
#define WM8904_INR_CM_ENA_MASK 0x0040 /* INR_CM_ENA */
#define WM8904_INR_CM_ENA_SHIFT 6 /* INR_CM_ENA */
#define WM8904_INR_CM_ENA_WIDTH 1 /* INR_CM_ENA */
#define WM8904_R_IP_SEL_N_MASK 0x0030 /* R_IP_SEL_N - [5:4] */
#define WM8904_R_IP_SEL_N_SHIFT 4 /* R_IP_SEL_N - [5:4] */
#define WM8904_R_IP_SEL_N_WIDTH 2 /* R_IP_SEL_N - [5:4] */
#define WM8904_R_IP_SEL_P_MASK 0x000C /* R_IP_SEL_P - [3:2] */
#define WM8904_R_IP_SEL_P_SHIFT 2 /* R_IP_SEL_P - [3:2] */
#define WM8904_R_IP_SEL_P_WIDTH 2 /* R_IP_SEL_P - [3:2] */
#define WM8904_R_MODE_MASK 0x0003 /* R_MODE - [1:0] */
#define WM8904_R_MODE_SHIFT 0 /* R_MODE - [1:0] */
#define WM8904_R_MODE_WIDTH 2 /* R_MODE - [1:0] */
/*
* R57 (0x39) - Analogue OUT1 Left
*/
#define WM8904_HPOUTL_MUTE 0x0100 /* HPOUTL_MUTE */
#define WM8904_HPOUTL_MUTE_MASK 0x0100 /* HPOUTL_MUTE */
#define WM8904_HPOUTL_MUTE_SHIFT 8 /* HPOUTL_MUTE */
#define WM8904_HPOUTL_MUTE_WIDTH 1 /* HPOUTL_MUTE */
#define WM8904_HPOUT_VU 0x0080 /* HPOUT_VU */
#define WM8904_HPOUT_VU_MASK 0x0080 /* HPOUT_VU */
#define WM8904_HPOUT_VU_SHIFT 7 /* HPOUT_VU */
#define WM8904_HPOUT_VU_WIDTH 1 /* HPOUT_VU */
#define WM8904_HPOUTLZC 0x0040 /* HPOUTLZC */
#define WM8904_HPOUTLZC_MASK 0x0040 /* HPOUTLZC */
#define WM8904_HPOUTLZC_SHIFT 6 /* HPOUTLZC */
#define WM8904_HPOUTLZC_WIDTH 1 /* HPOUTLZC */
#define WM8904_HPOUTL_VOL_MASK 0x003F /* HPOUTL_VOL - [5:0] */
#define WM8904_HPOUTL_VOL_SHIFT 0 /* HPOUTL_VOL - [5:0] */
#define WM8904_HPOUTL_VOL_WIDTH 6 /* HPOUTL_VOL - [5:0] */
/*
* R58 (0x3A) - Analogue OUT1 Right
*/
#define WM8904_HPOUTR_MUTE 0x0100 /* HPOUTR_MUTE */
#define WM8904_HPOUTR_MUTE_MASK 0x0100 /* HPOUTR_MUTE */
#define WM8904_HPOUTR_MUTE_SHIFT 8 /* HPOUTR_MUTE */
#define WM8904_HPOUTR_MUTE_WIDTH 1 /* HPOUTR_MUTE */
#define WM8904_HPOUT_VU 0x0080 /* HPOUT_VU */
#define WM8904_HPOUT_VU_MASK 0x0080 /* HPOUT_VU */
#define WM8904_HPOUT_VU_SHIFT 7 /* HPOUT_VU */
#define WM8904_HPOUT_VU_WIDTH 1 /* HPOUT_VU */
#define WM8904_HPOUTRZC 0x0040 /* HPOUTRZC */
#define WM8904_HPOUTRZC_MASK 0x0040 /* HPOUTRZC */
#define WM8904_HPOUTRZC_SHIFT 6 /* HPOUTRZC */
#define WM8904_HPOUTRZC_WIDTH 1 /* HPOUTRZC */
#define WM8904_HPOUTR_VOL_MASK 0x003F /* HPOUTR_VOL - [5:0] */
#define WM8904_HPOUTR_VOL_SHIFT 0 /* HPOUTR_VOL - [5:0] */
#define WM8904_HPOUTR_VOL_WIDTH 6 /* HPOUTR_VOL - [5:0] */
/*
* R59 (0x3B) - Analogue OUT2 Left
*/
#define WM8904_LINEOUTL_MUTE 0x0100 /* LINEOUTL_MUTE */
#define WM8904_LINEOUTL_MUTE_MASK 0x0100 /* LINEOUTL_MUTE */
#define WM8904_LINEOUTL_MUTE_SHIFT 8 /* LINEOUTL_MUTE */
#define WM8904_LINEOUTL_MUTE_WIDTH 1 /* LINEOUTL_MUTE */
#define WM8904_LINEOUT_VU 0x0080 /* LINEOUT_VU */
#define WM8904_LINEOUT_VU_MASK 0x0080 /* LINEOUT_VU */
#define WM8904_LINEOUT_VU_SHIFT 7 /* LINEOUT_VU */
#define WM8904_LINEOUT_VU_WIDTH 1 /* LINEOUT_VU */
#define WM8904_LINEOUTLZC 0x0040 /* LINEOUTLZC */
#define WM8904_LINEOUTLZC_MASK 0x0040 /* LINEOUTLZC */
#define WM8904_LINEOUTLZC_SHIFT 6 /* LINEOUTLZC */
#define WM8904_LINEOUTLZC_WIDTH 1 /* LINEOUTLZC */
#define WM8904_LINEOUTL_VOL_MASK 0x003F /* LINEOUTL_VOL - [5:0] */
#define WM8904_LINEOUTL_VOL_SHIFT 0 /* LINEOUTL_VOL - [5:0] */
#define WM8904_LINEOUTL_VOL_WIDTH 6 /* LINEOUTL_VOL - [5:0] */
/*
* R60 (0x3C) - Analogue OUT2 Right
*/
#define WM8904_LINEOUTR_MUTE 0x0100 /* LINEOUTR_MUTE */
#define WM8904_LINEOUTR_MUTE_MASK 0x0100 /* LINEOUTR_MUTE */
#define WM8904_LINEOUTR_MUTE_SHIFT 8 /* LINEOUTR_MUTE */
#define WM8904_LINEOUTR_MUTE_WIDTH 1 /* LINEOUTR_MUTE */
#define WM8904_LINEOUT_VU 0x0080 /* LINEOUT_VU */
#define WM8904_LINEOUT_VU_MASK 0x0080 /* LINEOUT_VU */
#define WM8904_LINEOUT_VU_SHIFT 7 /* LINEOUT_VU */
#define WM8904_LINEOUT_VU_WIDTH 1 /* LINEOUT_VU */
#define WM8904_LINEOUTRZC 0x0040 /* LINEOUTRZC */
#define WM8904_LINEOUTRZC_MASK 0x0040 /* LINEOUTRZC */
#define WM8904_LINEOUTRZC_SHIFT 6 /* LINEOUTRZC */
#define WM8904_LINEOUTRZC_WIDTH 1 /* LINEOUTRZC */
#define WM8904_LINEOUTR_VOL_MASK 0x003F /* LINEOUTR_VOL - [5:0] */
#define WM8904_LINEOUTR_VOL_SHIFT 0 /* LINEOUTR_VOL - [5:0] */
#define WM8904_LINEOUTR_VOL_WIDTH 6 /* LINEOUTR_VOL - [5:0] */
/*
* R61 (0x3D) - Analogue OUT12 ZC
*/
#define WM8904_HPL_BYP_ENA 0x0008 /* HPL_BYP_ENA */
#define WM8904_HPL_BYP_ENA_MASK 0x0008 /* HPL_BYP_ENA */
#define WM8904_HPL_BYP_ENA_SHIFT 3 /* HPL_BYP_ENA */
#define WM8904_HPL_BYP_ENA_WIDTH 1 /* HPL_BYP_ENA */
#define WM8904_HPR_BYP_ENA 0x0004 /* HPR_BYP_ENA */
#define WM8904_HPR_BYP_ENA_MASK 0x0004 /* HPR_BYP_ENA */
#define WM8904_HPR_BYP_ENA_SHIFT 2 /* HPR_BYP_ENA */
#define WM8904_HPR_BYP_ENA_WIDTH 1 /* HPR_BYP_ENA */
#define WM8904_LINEOUTL_BYP_ENA 0x0002 /* LINEOUTL_BYP_ENA */
#define WM8904_LINEOUTL_BYP_ENA_MASK 0x0002 /* LINEOUTL_BYP_ENA */
#define WM8904_LINEOUTL_BYP_ENA_SHIFT 1 /* LINEOUTL_BYP_ENA */
#define WM8904_LINEOUTL_BYP_ENA_WIDTH 1 /* LINEOUTL_BYP_ENA */
#define WM8904_LINEOUTR_BYP_ENA 0x0001 /* LINEOUTR_BYP_ENA */
#define WM8904_LINEOUTR_BYP_ENA_MASK 0x0001 /* LINEOUTR_BYP_ENA */
#define WM8904_LINEOUTR_BYP_ENA_SHIFT 0 /* LINEOUTR_BYP_ENA */
#define WM8904_LINEOUTR_BYP_ENA_WIDTH 1 /* LINEOUTR_BYP_ENA */
/*
* R67 (0x43) - DC Servo 0
*/
#define WM8904_DCS_ENA_CHAN_3 0x0008 /* DCS_ENA_CHAN_3 */
#define WM8904_DCS_ENA_CHAN_3_MASK 0x0008 /* DCS_ENA_CHAN_3 */
#define WM8904_DCS_ENA_CHAN_3_SHIFT 3 /* DCS_ENA_CHAN_3 */
#define WM8904_DCS_ENA_CHAN_3_WIDTH 1 /* DCS_ENA_CHAN_3 */
#define WM8904_DCS_ENA_CHAN_2 0x0004 /* DCS_ENA_CHAN_2 */
#define WM8904_DCS_ENA_CHAN_2_MASK 0x0004 /* DCS_ENA_CHAN_2 */
#define WM8904_DCS_ENA_CHAN_2_SHIFT 2 /* DCS_ENA_CHAN_2 */
#define WM8904_DCS_ENA_CHAN_2_WIDTH 1 /* DCS_ENA_CHAN_2 */
#define WM8904_DCS_ENA_CHAN_1 0x0002 /* DCS_ENA_CHAN_1 */
#define WM8904_DCS_ENA_CHAN_1_MASK 0x0002 /* DCS_ENA_CHAN_1 */
#define WM8904_DCS_ENA_CHAN_1_SHIFT 1 /* DCS_ENA_CHAN_1 */
#define WM8904_DCS_ENA_CHAN_1_WIDTH 1 /* DCS_ENA_CHAN_1 */
#define WM8904_DCS_ENA_CHAN_0 0x0001 /* DCS_ENA_CHAN_0 */
#define WM8904_DCS_ENA_CHAN_0_MASK 0x0001 /* DCS_ENA_CHAN_0 */
#define WM8904_DCS_ENA_CHAN_0_SHIFT 0 /* DCS_ENA_CHAN_0 */
#define WM8904_DCS_ENA_CHAN_0_WIDTH 1 /* DCS_ENA_CHAN_0 */
/*
* R68 (0x44) - DC Servo 1
*/
#define WM8904_DCS_TRIG_SINGLE_3 0x8000 /* DCS_TRIG_SINGLE_3 */
#define WM8904_DCS_TRIG_SINGLE_3_MASK 0x8000 /* DCS_TRIG_SINGLE_3 */
#define WM8904_DCS_TRIG_SINGLE_3_SHIFT 15 /* DCS_TRIG_SINGLE_3 */
#define WM8904_DCS_TRIG_SINGLE_3_WIDTH 1 /* DCS_TRIG_SINGLE_3 */
#define WM8904_DCS_TRIG_SINGLE_2 0x4000 /* DCS_TRIG_SINGLE_2 */
#define WM8904_DCS_TRIG_SINGLE_2_MASK 0x4000 /* DCS_TRIG_SINGLE_2 */
#define WM8904_DCS_TRIG_SINGLE_2_SHIFT 14 /* DCS_TRIG_SINGLE_2 */
#define WM8904_DCS_TRIG_SINGLE_2_WIDTH 1 /* DCS_TRIG_SINGLE_2 */
#define WM8904_DCS_TRIG_SINGLE_1 0x2000 /* DCS_TRIG_SINGLE_1 */
#define WM8904_DCS_TRIG_SINGLE_1_MASK 0x2000 /* DCS_TRIG_SINGLE_1 */
#define WM8904_DCS_TRIG_SINGLE_1_SHIFT 13 /* DCS_TRIG_SINGLE_1 */
#define WM8904_DCS_TRIG_SINGLE_1_WIDTH 1 /* DCS_TRIG_SINGLE_1 */
#define WM8904_DCS_TRIG_SINGLE_0 0x1000 /* DCS_TRIG_SINGLE_0 */
#define WM8904_DCS_TRIG_SINGLE_0_MASK 0x1000 /* DCS_TRIG_SINGLE_0 */
#define WM8904_DCS_TRIG_SINGLE_0_SHIFT 12 /* DCS_TRIG_SINGLE_0 */
#define WM8904_DCS_TRIG_SINGLE_0_WIDTH 1 /* DCS_TRIG_SINGLE_0 */
#define WM8904_DCS_TRIG_SERIES_3 0x0800 /* DCS_TRIG_SERIES_3 */
#define WM8904_DCS_TRIG_SERIES_3_MASK 0x0800 /* DCS_TRIG_SERIES_3 */
#define WM8904_DCS_TRIG_SERIES_3_SHIFT 11 /* DCS_TRIG_SERIES_3 */
#define WM8904_DCS_TRIG_SERIES_3_WIDTH 1 /* DCS_TRIG_SERIES_3 */
#define WM8904_DCS_TRIG_SERIES_2 0x0400 /* DCS_TRIG_SERIES_2 */
#define WM8904_DCS_TRIG_SERIES_2_MASK 0x0400 /* DCS_TRIG_SERIES_2 */
#define WM8904_DCS_TRIG_SERIES_2_SHIFT 10 /* DCS_TRIG_SERIES_2 */
#define WM8904_DCS_TRIG_SERIES_2_WIDTH 1 /* DCS_TRIG_SERIES_2 */
#define WM8904_DCS_TRIG_SERIES_1 0x0200 /* DCS_TRIG_SERIES_1 */
#define WM8904_DCS_TRIG_SERIES_1_MASK 0x0200 /* DCS_TRIG_SERIES_1 */
#define WM8904_DCS_TRIG_SERIES_1_SHIFT 9 /* DCS_TRIG_SERIES_1 */
#define WM8904_DCS_TRIG_SERIES_1_WIDTH 1 /* DCS_TRIG_SERIES_1 */
#define WM8904_DCS_TRIG_SERIES_0 0x0100 /* DCS_TRIG_SERIES_0 */
#define WM8904_DCS_TRIG_SERIES_0_MASK 0x0100 /* DCS_TRIG_SERIES_0 */
#define WM8904_DCS_TRIG_SERIES_0_SHIFT 8 /* DCS_TRIG_SERIES_0 */
#define WM8904_DCS_TRIG_SERIES_0_WIDTH 1 /* DCS_TRIG_SERIES_0 */
#define WM8904_DCS_TRIG_STARTUP_3 0x0080 /* DCS_TRIG_STARTUP_3 */
#define WM8904_DCS_TRIG_STARTUP_3_MASK 0x0080 /* DCS_TRIG_STARTUP_3 */
#define WM8904_DCS_TRIG_STARTUP_3_SHIFT 7 /* DCS_TRIG_STARTUP_3 */
#define WM8904_DCS_TRIG_STARTUP_3_WIDTH 1 /* DCS_TRIG_STARTUP_3 */
#define WM8904_DCS_TRIG_STARTUP_2 0x0040 /* DCS_TRIG_STARTUP_2 */
#define WM8904_DCS_TRIG_STARTUP_2_MASK 0x0040 /* DCS_TRIG_STARTUP_2 */
#define WM8904_DCS_TRIG_STARTUP_2_SHIFT 6 /* DCS_TRIG_STARTUP_2 */
#define WM8904_DCS_TRIG_STARTUP_2_WIDTH 1 /* DCS_TRIG_STARTUP_2 */
#define WM8904_DCS_TRIG_STARTUP_1 0x0020 /* DCS_TRIG_STARTUP_1 */
#define WM8904_DCS_TRIG_STARTUP_1_MASK 0x0020 /* DCS_TRIG_STARTUP_1 */
#define WM8904_DCS_TRIG_STARTUP_1_SHIFT 5 /* DCS_TRIG_STARTUP_1 */
#define WM8904_DCS_TRIG_STARTUP_1_WIDTH 1 /* DCS_TRIG_STARTUP_1 */
#define WM8904_DCS_TRIG_STARTUP_0 0x0010 /* DCS_TRIG_STARTUP_0 */
#define WM8904_DCS_TRIG_STARTUP_0_MASK 0x0010 /* DCS_TRIG_STARTUP_0 */
#define WM8904_DCS_TRIG_STARTUP_0_SHIFT 4 /* DCS_TRIG_STARTUP_0 */
#define WM8904_DCS_TRIG_STARTUP_0_WIDTH 1 /* DCS_TRIG_STARTUP_0 */
#define WM8904_DCS_TRIG_DAC_WR_3 0x0008 /* DCS_TRIG_DAC_WR_3 */
#define WM8904_DCS_TRIG_DAC_WR_3_MASK 0x0008 /* DCS_TRIG_DAC_WR_3 */
#define WM8904_DCS_TRIG_DAC_WR_3_SHIFT 3 /* DCS_TRIG_DAC_WR_3 */
#define WM8904_DCS_TRIG_DAC_WR_3_WIDTH 1 /* DCS_TRIG_DAC_WR_3 */
#define WM8904_DCS_TRIG_DAC_WR_2 0x0004 /* DCS_TRIG_DAC_WR_2 */
#define WM8904_DCS_TRIG_DAC_WR_2_MASK 0x0004 /* DCS_TRIG_DAC_WR_2 */
#define WM8904_DCS_TRIG_DAC_WR_2_SHIFT 2 /* DCS_TRIG_DAC_WR_2 */
#define WM8904_DCS_TRIG_DAC_WR_2_WIDTH 1 /* DCS_TRIG_DAC_WR_2 */
#define WM8904_DCS_TRIG_DAC_WR_1 0x0002 /* DCS_TRIG_DAC_WR_1 */
#define WM8904_DCS_TRIG_DAC_WR_1_MASK 0x0002 /* DCS_TRIG_DAC_WR_1 */
#define WM8904_DCS_TRIG_DAC_WR_1_SHIFT 1 /* DCS_TRIG_DAC_WR_1 */
#define WM8904_DCS_TRIG_DAC_WR_1_WIDTH 1 /* DCS_TRIG_DAC_WR_1 */
#define WM8904_DCS_TRIG_DAC_WR_0 0x0001 /* DCS_TRIG_DAC_WR_0 */
#define WM8904_DCS_TRIG_DAC_WR_0_MASK 0x0001 /* DCS_TRIG_DAC_WR_0 */
#define WM8904_DCS_TRIG_DAC_WR_0_SHIFT 0 /* DCS_TRIG_DAC_WR_0 */
#define WM8904_DCS_TRIG_DAC_WR_0_WIDTH 1 /* DCS_TRIG_DAC_WR_0 */
/*
* R69 (0x45) - DC Servo 2
*/
#define WM8904_DCS_TIMER_PERIOD_23_MASK 0x0F00 /* DCS_TIMER_PERIOD_23 - [11:8] */
#define WM8904_DCS_TIMER_PERIOD_23_SHIFT 8 /* DCS_TIMER_PERIOD_23 - [11:8] */
#define WM8904_DCS_TIMER_PERIOD_23_WIDTH 4 /* DCS_TIMER_PERIOD_23 - [11:8] */
#define WM8904_DCS_TIMER_PERIOD_01_MASK 0x000F /* DCS_TIMER_PERIOD_01 - [3:0] */
#define WM8904_DCS_TIMER_PERIOD_01_SHIFT 0 /* DCS_TIMER_PERIOD_01 - [3:0] */
#define WM8904_DCS_TIMER_PERIOD_01_WIDTH 4 /* DCS_TIMER_PERIOD_01 - [3:0] */
/*
* R71 (0x47) - DC Servo 4
*/
#define WM8904_DCS_SERIES_NO_23_MASK 0x007F /* DCS_SERIES_NO_23 - [6:0] */
#define WM8904_DCS_SERIES_NO_23_SHIFT 0 /* DCS_SERIES_NO_23 - [6:0] */
#define WM8904_DCS_SERIES_NO_23_WIDTH 7 /* DCS_SERIES_NO_23 - [6:0] */
/*
* R72 (0x48) - DC Servo 5
*/
#define WM8904_DCS_SERIES_NO_01_MASK 0x007F /* DCS_SERIES_NO_01 - [6:0] */
#define WM8904_DCS_SERIES_NO_01_SHIFT 0 /* DCS_SERIES_NO_01 - [6:0] */
#define WM8904_DCS_SERIES_NO_01_WIDTH 7 /* DCS_SERIES_NO_01 - [6:0] */
/*
* R73 (0x49) - DC Servo 6
*/
#define WM8904_DCS_DAC_WR_VAL_3_MASK 0x00FF /* DCS_DAC_WR_VAL_3 - [7:0] */
#define WM8904_DCS_DAC_WR_VAL_3_SHIFT 0 /* DCS_DAC_WR_VAL_3 - [7:0] */
#define WM8904_DCS_DAC_WR_VAL_3_WIDTH 8 /* DCS_DAC_WR_VAL_3 - [7:0] */
/*
* R74 (0x4A) - DC Servo 7
*/
#define WM8904_DCS_DAC_WR_VAL_2_MASK 0x00FF /* DCS_DAC_WR_VAL_2 - [7:0] */
#define WM8904_DCS_DAC_WR_VAL_2_SHIFT 0 /* DCS_DAC_WR_VAL_2 - [7:0] */
#define WM8904_DCS_DAC_WR_VAL_2_WIDTH 8 /* DCS_DAC_WR_VAL_2 - [7:0] */
/*
* R75 (0x4B) - DC Servo 8
*/
#define WM8904_DCS_DAC_WR_VAL_1_MASK 0x00FF /* DCS_DAC_WR_VAL_1 - [7:0] */
#define WM8904_DCS_DAC_WR_VAL_1_SHIFT 0 /* DCS_DAC_WR_VAL_1 - [7:0] */
#define WM8904_DCS_DAC_WR_VAL_1_WIDTH 8 /* DCS_DAC_WR_VAL_1 - [7:0] */
/*
* R76 (0x4C) - DC Servo 9
*/
#define WM8904_DCS_DAC_WR_VAL_0_MASK 0x00FF /* DCS_DAC_WR_VAL_0 - [7:0] */
#define WM8904_DCS_DAC_WR_VAL_0_SHIFT 0 /* DCS_DAC_WR_VAL_0 - [7:0] */
#define WM8904_DCS_DAC_WR_VAL_0_WIDTH 8 /* DCS_DAC_WR_VAL_0 - [7:0] */
/*
* R77 (0x4D) - DC Servo Readback 0
*/
#define WM8904_DCS_CAL_COMPLETE_MASK 0x0F00 /* DCS_CAL_COMPLETE - [11:8] */
#define WM8904_DCS_CAL_COMPLETE_SHIFT 8 /* DCS_CAL_COMPLETE - [11:8] */
#define WM8904_DCS_CAL_COMPLETE_WIDTH 4 /* DCS_CAL_COMPLETE - [11:8] */
#define WM8904_DCS_DAC_WR_COMPLETE_MASK 0x00F0 /* DCS_DAC_WR_COMPLETE - [7:4] */
#define WM8904_DCS_DAC_WR_COMPLETE_SHIFT 4 /* DCS_DAC_WR_COMPLETE - [7:4] */
#define WM8904_DCS_DAC_WR_COMPLETE_WIDTH 4 /* DCS_DAC_WR_COMPLETE - [7:4] */
#define WM8904_DCS_STARTUP_COMPLETE_MASK 0x000F /* DCS_STARTUP_COMPLETE - [3:0] */
#define WM8904_DCS_STARTUP_COMPLETE_SHIFT 0 /* DCS_STARTUP_COMPLETE - [3:0] */
#define WM8904_DCS_STARTUP_COMPLETE_WIDTH 4 /* DCS_STARTUP_COMPLETE - [3:0] */
/*
* R90 (0x5A) - Analogue HP 0
*/
#define WM8904_HPL_RMV_SHORT 0x0080 /* HPL_RMV_SHORT */
#define WM8904_HPL_RMV_SHORT_MASK 0x0080 /* HPL_RMV_SHORT */
#define WM8904_HPL_RMV_SHORT_SHIFT 7 /* HPL_RMV_SHORT */
#define WM8904_HPL_RMV_SHORT_WIDTH 1 /* HPL_RMV_SHORT */
#define WM8904_HPL_ENA_OUTP 0x0040 /* HPL_ENA_OUTP */
#define WM8904_HPL_ENA_OUTP_MASK 0x0040 /* HPL_ENA_OUTP */
#define WM8904_HPL_ENA_OUTP_SHIFT 6 /* HPL_ENA_OUTP */
#define WM8904_HPL_ENA_OUTP_WIDTH 1 /* HPL_ENA_OUTP */
#define WM8904_HPL_ENA_DLY 0x0020 /* HPL_ENA_DLY */
#define WM8904_HPL_ENA_DLY_MASK 0x0020 /* HPL_ENA_DLY */
#define WM8904_HPL_ENA_DLY_SHIFT 5 /* HPL_ENA_DLY */
#define WM8904_HPL_ENA_DLY_WIDTH 1 /* HPL_ENA_DLY */
#define WM8904_HPL_ENA 0x0010 /* HPL_ENA */
#define WM8904_HPL_ENA_MASK 0x0010 /* HPL_ENA */
#define WM8904_HPL_ENA_SHIFT 4 /* HPL_ENA */
#define WM8904_HPL_ENA_WIDTH 1 /* HPL_ENA */
#define WM8904_HPR_RMV_SHORT 0x0008 /* HPR_RMV_SHORT */
#define WM8904_HPR_RMV_SHORT_MASK 0x0008 /* HPR_RMV_SHORT */
#define WM8904_HPR_RMV_SHORT_SHIFT 3 /* HPR_RMV_SHORT */
#define WM8904_HPR_RMV_SHORT_WIDTH 1 /* HPR_RMV_SHORT */
#define WM8904_HPR_ENA_OUTP 0x0004 /* HPR_ENA_OUTP */
#define WM8904_HPR_ENA_OUTP_MASK 0x0004 /* HPR_ENA_OUTP */
#define WM8904_HPR_ENA_OUTP_SHIFT 2 /* HPR_ENA_OUTP */
#define WM8904_HPR_ENA_OUTP_WIDTH 1 /* HPR_ENA_OUTP */
#define WM8904_HPR_ENA_DLY 0x0002 /* HPR_ENA_DLY */
#define WM8904_HPR_ENA_DLY_MASK 0x0002 /* HPR_ENA_DLY */
#define WM8904_HPR_ENA_DLY_SHIFT 1 /* HPR_ENA_DLY */
#define WM8904_HPR_ENA_DLY_WIDTH 1 /* HPR_ENA_DLY */
#define WM8904_HPR_ENA 0x0001 /* HPR_ENA */
#define WM8904_HPR_ENA_MASK 0x0001 /* HPR_ENA */
#define WM8904_HPR_ENA_SHIFT 0 /* HPR_ENA */
#define WM8904_HPR_ENA_WIDTH 1 /* HPR_ENA */
/*
* R94 (0x5E) - Analogue Lineout 0
*/
#define WM8904_LINEOUTL_RMV_SHORT 0x0080 /* LINEOUTL_RMV_SHORT */
#define WM8904_LINEOUTL_RMV_SHORT_MASK 0x0080 /* LINEOUTL_RMV_SHORT */
#define WM8904_LINEOUTL_RMV_SHORT_SHIFT 7 /* LINEOUTL_RMV_SHORT */
#define WM8904_LINEOUTL_RMV_SHORT_WIDTH 1 /* LINEOUTL_RMV_SHORT */
#define WM8904_LINEOUTL_ENA_OUTP 0x0040 /* LINEOUTL_ENA_OUTP */
#define WM8904_LINEOUTL_ENA_OUTP_MASK 0x0040 /* LINEOUTL_ENA_OUTP */
#define WM8904_LINEOUTL_ENA_OUTP_SHIFT 6 /* LINEOUTL_ENA_OUTP */
#define WM8904_LINEOUTL_ENA_OUTP_WIDTH 1 /* LINEOUTL_ENA_OUTP */
#define WM8904_LINEOUTL_ENA_DLY 0x0020 /* LINEOUTL_ENA_DLY */
#define WM8904_LINEOUTL_ENA_DLY_MASK 0x0020 /* LINEOUTL_ENA_DLY */
#define WM8904_LINEOUTL_ENA_DLY_SHIFT 5 /* LINEOUTL_ENA_DLY */
#define WM8904_LINEOUTL_ENA_DLY_WIDTH 1 /* LINEOUTL_ENA_DLY */
#define WM8904_LINEOUTL_ENA 0x0010 /* LINEOUTL_ENA */
#define WM8904_LINEOUTL_ENA_MASK 0x0010 /* LINEOUTL_ENA */
#define WM8904_LINEOUTL_ENA_SHIFT 4 /* LINEOUTL_ENA */
#define WM8904_LINEOUTL_ENA_WIDTH 1 /* LINEOUTL_ENA */
#define WM8904_LINEOUTR_RMV_SHORT 0x0008 /* LINEOUTR_RMV_SHORT */
#define WM8904_LINEOUTR_RMV_SHORT_MASK 0x0008 /* LINEOUTR_RMV_SHORT */
#define WM8904_LINEOUTR_RMV_SHORT_SHIFT 3 /* LINEOUTR_RMV_SHORT */
#define WM8904_LINEOUTR_RMV_SHORT_WIDTH 1 /* LINEOUTR_RMV_SHORT */
#define WM8904_LINEOUTR_ENA_OUTP 0x0004 /* LINEOUTR_ENA_OUTP */
#define WM8904_LINEOUTR_ENA_OUTP_MASK 0x0004 /* LINEOUTR_ENA_OUTP */
#define WM8904_LINEOUTR_ENA_OUTP_SHIFT 2 /* LINEOUTR_ENA_OUTP */
#define WM8904_LINEOUTR_ENA_OUTP_WIDTH 1 /* LINEOUTR_ENA_OUTP */
#define WM8904_LINEOUTR_ENA_DLY 0x0002 /* LINEOUTR_ENA_DLY */
#define WM8904_LINEOUTR_ENA_DLY_MASK 0x0002 /* LINEOUTR_ENA_DLY */
#define WM8904_LINEOUTR_ENA_DLY_SHIFT 1 /* LINEOUTR_ENA_DLY */
#define WM8904_LINEOUTR_ENA_DLY_WIDTH 1 /* LINEOUTR_ENA_DLY */
#define WM8904_LINEOUTR_ENA 0x0001 /* LINEOUTR_ENA */
#define WM8904_LINEOUTR_ENA_MASK 0x0001 /* LINEOUTR_ENA */
#define WM8904_LINEOUTR_ENA_SHIFT 0 /* LINEOUTR_ENA */
#define WM8904_LINEOUTR_ENA_WIDTH 1 /* LINEOUTR_ENA */
/*
* R98 (0x62) - Charge Pump 0
*/
#define WM8904_CP_ENA 0x0001 /* CP_ENA */
#define WM8904_CP_ENA_MASK 0x0001 /* CP_ENA */
#define WM8904_CP_ENA_SHIFT 0 /* CP_ENA */
#define WM8904_CP_ENA_WIDTH 1 /* CP_ENA */
/*
* R104 (0x68) - Class W 0
*/
#define WM8904_CP_DYN_PWR 0x0001 /* CP_DYN_PWR */
#define WM8904_CP_DYN_PWR_MASK 0x0001 /* CP_DYN_PWR */
#define WM8904_CP_DYN_PWR_SHIFT 0 /* CP_DYN_PWR */
#define WM8904_CP_DYN_PWR_WIDTH 1 /* CP_DYN_PWR */
/*
* R108 (0x6C) - Write Sequencer 0
*/
#define WM8904_WSEQ_ENA 0x0100 /* WSEQ_ENA */
#define WM8904_WSEQ_ENA_MASK 0x0100 /* WSEQ_ENA */
#define WM8904_WSEQ_ENA_SHIFT 8 /* WSEQ_ENA */
#define WM8904_WSEQ_ENA_WIDTH 1 /* WSEQ_ENA */
#define WM8904_WSEQ_WRITE_INDEX_MASK 0x001F /* WSEQ_WRITE_INDEX - [4:0] */
#define WM8904_WSEQ_WRITE_INDEX_SHIFT 0 /* WSEQ_WRITE_INDEX - [4:0] */
#define WM8904_WSEQ_WRITE_INDEX_WIDTH 5 /* WSEQ_WRITE_INDEX - [4:0] */
/*
* R109 (0x6D) - Write Sequencer 1
*/
#define WM8904_WSEQ_DATA_WIDTH_MASK 0x7000 /* WSEQ_DATA_WIDTH - [14:12] */
#define WM8904_WSEQ_DATA_WIDTH_SHIFT 12 /* WSEQ_DATA_WIDTH - [14:12] */
#define WM8904_WSEQ_DATA_WIDTH_WIDTH 3 /* WSEQ_DATA_WIDTH - [14:12] */
#define WM8904_WSEQ_DATA_START_MASK 0x0F00 /* WSEQ_DATA_START - [11:8] */
#define WM8904_WSEQ_DATA_START_SHIFT 8 /* WSEQ_DATA_START - [11:8] */
#define WM8904_WSEQ_DATA_START_WIDTH 4 /* WSEQ_DATA_START - [11:8] */
#define WM8904_WSEQ_ADDR_MASK 0x00FF /* WSEQ_ADDR - [7:0] */
#define WM8904_WSEQ_ADDR_SHIFT 0 /* WSEQ_ADDR - [7:0] */
#define WM8904_WSEQ_ADDR_WIDTH 8 /* WSEQ_ADDR - [7:0] */
/*
* R110 (0x6E) - Write Sequencer 2
*/
#define WM8904_WSEQ_EOS 0x4000 /* WSEQ_EOS */
#define WM8904_WSEQ_EOS_MASK 0x4000 /* WSEQ_EOS */
#define WM8904_WSEQ_EOS_SHIFT 14 /* WSEQ_EOS */
#define WM8904_WSEQ_EOS_WIDTH 1 /* WSEQ_EOS */
#define WM8904_WSEQ_DELAY_MASK 0x0F00 /* WSEQ_DELAY - [11:8] */
#define WM8904_WSEQ_DELAY_SHIFT 8 /* WSEQ_DELAY - [11:8] */
#define WM8904_WSEQ_DELAY_WIDTH 4 /* WSEQ_DELAY - [11:8] */
#define WM8904_WSEQ_DATA_MASK 0x00FF /* WSEQ_DATA - [7:0] */
#define WM8904_WSEQ_DATA_SHIFT 0 /* WSEQ_DATA - [7:0] */
#define WM8904_WSEQ_DATA_WIDTH 8 /* WSEQ_DATA - [7:0] */
/*
* R111 (0x6F) - Write Sequencer 3
*/
#define WM8904_WSEQ_ABORT 0x0200 /* WSEQ_ABORT */
#define WM8904_WSEQ_ABORT_MASK 0x0200 /* WSEQ_ABORT */
#define WM8904_WSEQ_ABORT_SHIFT 9 /* WSEQ_ABORT */
#define WM8904_WSEQ_ABORT_WIDTH 1 /* WSEQ_ABORT */
#define WM8904_WSEQ_START 0x0100 /* WSEQ_START */
#define WM8904_WSEQ_START_MASK 0x0100 /* WSEQ_START */
#define WM8904_WSEQ_START_SHIFT 8 /* WSEQ_START */
#define WM8904_WSEQ_START_WIDTH 1 /* WSEQ_START */
#define WM8904_WSEQ_START_INDEX_MASK 0x003F /* WSEQ_START_INDEX - [5:0] */
#define WM8904_WSEQ_START_INDEX_SHIFT 0 /* WSEQ_START_INDEX - [5:0] */
#define WM8904_WSEQ_START_INDEX_WIDTH 6 /* WSEQ_START_INDEX - [5:0] */
/*
* R112 (0x70) - Write Sequencer 4
*/
#define WM8904_WSEQ_CURRENT_INDEX_MASK 0x03F0 /* WSEQ_CURRENT_INDEX - [9:4] */
#define WM8904_WSEQ_CURRENT_INDEX_SHIFT 4 /* WSEQ_CURRENT_INDEX - [9:4] */
#define WM8904_WSEQ_CURRENT_INDEX_WIDTH 6 /* WSEQ_CURRENT_INDEX - [9:4] */
#define WM8904_WSEQ_BUSY 0x0001 /* WSEQ_BUSY */
#define WM8904_WSEQ_BUSY_MASK 0x0001 /* WSEQ_BUSY */
#define WM8904_WSEQ_BUSY_SHIFT 0 /* WSEQ_BUSY */
#define WM8904_WSEQ_BUSY_WIDTH 1 /* WSEQ_BUSY */
/*
* R116 (0x74) - FLL Control 1
*/
#define WM8904_FLL_FRACN_ENA 0x0004 /* FLL_FRACN_ENA */
#define WM8904_FLL_FRACN_ENA_MASK 0x0004 /* FLL_FRACN_ENA */
#define WM8904_FLL_FRACN_ENA_SHIFT 2 /* FLL_FRACN_ENA */
#define WM8904_FLL_FRACN_ENA_WIDTH 1 /* FLL_FRACN_ENA */
#define WM8904_FLL_OSC_ENA 0x0002 /* FLL_OSC_ENA */
#define WM8904_FLL_OSC_ENA_MASK 0x0002 /* FLL_OSC_ENA */
#define WM8904_FLL_OSC_ENA_SHIFT 1 /* FLL_OSC_ENA */
#define WM8904_FLL_OSC_ENA_WIDTH 1 /* FLL_OSC_ENA */
#define WM8904_FLL_ENA 0x0001 /* FLL_ENA */
#define WM8904_FLL_ENA_MASK 0x0001 /* FLL_ENA */
#define WM8904_FLL_ENA_SHIFT 0 /* FLL_ENA */
#define WM8904_FLL_ENA_WIDTH 1 /* FLL_ENA */
/*
* R117 (0x75) - FLL Control 2
*/
#define WM8904_FLL_OUTDIV_MASK 0x3F00 /* FLL_OUTDIV - [13:8] */
#define WM8904_FLL_OUTDIV_SHIFT 8 /* FLL_OUTDIV - [13:8] */
#define WM8904_FLL_OUTDIV_WIDTH 6 /* FLL_OUTDIV - [13:8] */
#define WM8904_FLL_CTRL_RATE_MASK 0x0070 /* FLL_CTRL_RATE - [6:4] */
#define WM8904_FLL_CTRL_RATE_SHIFT 4 /* FLL_CTRL_RATE - [6:4] */
#define WM8904_FLL_CTRL_RATE_WIDTH 3 /* FLL_CTRL_RATE - [6:4] */
#define WM8904_FLL_FRATIO_MASK 0x0007 /* FLL_FRATIO - [2:0] */
#define WM8904_FLL_FRATIO_SHIFT 0 /* FLL_FRATIO - [2:0] */
#define WM8904_FLL_FRATIO_WIDTH 3 /* FLL_FRATIO - [2:0] */
/*
* R118 (0x76) - FLL Control 3
*/
#define WM8904_FLL_K_MASK 0xFFFF /* FLL_K - [15:0] */
#define WM8904_FLL_K_SHIFT 0 /* FLL_K - [15:0] */
#define WM8904_FLL_K_WIDTH 16 /* FLL_K - [15:0] */
/*
* R119 (0x77) - FLL Control 4
*/
#define WM8904_FLL_N_MASK 0x7FE0 /* FLL_N - [14:5] */
#define WM8904_FLL_N_SHIFT 5 /* FLL_N - [14:5] */
#define WM8904_FLL_N_WIDTH 10 /* FLL_N - [14:5] */
#define WM8904_FLL_GAIN_MASK 0x000F /* FLL_GAIN - [3:0] */
#define WM8904_FLL_GAIN_SHIFT 0 /* FLL_GAIN - [3:0] */
#define WM8904_FLL_GAIN_WIDTH 4 /* FLL_GAIN - [3:0] */
/*
* R120 (0x78) - FLL Control 5
*/
#define WM8904_FLL_CLK_REF_DIV_MASK 0x0018 /* FLL_CLK_REF_DIV - [4:3] */
#define WM8904_FLL_CLK_REF_DIV_SHIFT 3 /* FLL_CLK_REF_DIV - [4:3] */
#define WM8904_FLL_CLK_REF_DIV_WIDTH 2 /* FLL_CLK_REF_DIV - [4:3] */
#define WM8904_FLL_CLK_REF_SRC_MASK 0x0003 /* FLL_CLK_REF_SRC - [1:0] */
#define WM8904_FLL_CLK_REF_SRC_SHIFT 0 /* FLL_CLK_REF_SRC - [1:0] */
#define WM8904_FLL_CLK_REF_SRC_WIDTH 2 /* FLL_CLK_REF_SRC - [1:0] */
/*
* R126 (0x7E) - Digital Pulls
*/
#define WM8904_MCLK_PU 0x0080 /* MCLK_PU */
#define WM8904_MCLK_PU_MASK 0x0080 /* MCLK_PU */
#define WM8904_MCLK_PU_SHIFT 7 /* MCLK_PU */
#define WM8904_MCLK_PU_WIDTH 1 /* MCLK_PU */
#define WM8904_MCLK_PD 0x0040 /* MCLK_PD */
#define WM8904_MCLK_PD_MASK 0x0040 /* MCLK_PD */
#define WM8904_MCLK_PD_SHIFT 6 /* MCLK_PD */
#define WM8904_MCLK_PD_WIDTH 1 /* MCLK_PD */
#define WM8904_DACDAT_PU 0x0020 /* DACDAT_PU */
#define WM8904_DACDAT_PU_MASK 0x0020 /* DACDAT_PU */
#define WM8904_DACDAT_PU_SHIFT 5 /* DACDAT_PU */
#define WM8904_DACDAT_PU_WIDTH 1 /* DACDAT_PU */
#define WM8904_DACDAT_PD 0x0010 /* DACDAT_PD */
#define WM8904_DACDAT_PD_MASK 0x0010 /* DACDAT_PD */
#define WM8904_DACDAT_PD_SHIFT 4 /* DACDAT_PD */
#define WM8904_DACDAT_PD_WIDTH 1 /* DACDAT_PD */
#define WM8904_LRCLK_PU 0x0008 /* LRCLK_PU */
#define WM8904_LRCLK_PU_MASK 0x0008 /* LRCLK_PU */
#define WM8904_LRCLK_PU_SHIFT 3 /* LRCLK_PU */
#define WM8904_LRCLK_PU_WIDTH 1 /* LRCLK_PU */
#define WM8904_LRCLK_PD 0x0004 /* LRCLK_PD */
#define WM8904_LRCLK_PD_MASK 0x0004 /* LRCLK_PD */
#define WM8904_LRCLK_PD_SHIFT 2 /* LRCLK_PD */
#define WM8904_LRCLK_PD_WIDTH 1 /* LRCLK_PD */
#define WM8904_BCLK_PU 0x0002 /* BCLK_PU */
#define WM8904_BCLK_PU_MASK 0x0002 /* BCLK_PU */
#define WM8904_BCLK_PU_SHIFT 1 /* BCLK_PU */
#define WM8904_BCLK_PU_WIDTH 1 /* BCLK_PU */
#define WM8904_BCLK_PD 0x0001 /* BCLK_PD */
#define WM8904_BCLK_PD_MASK 0x0001 /* BCLK_PD */
#define WM8904_BCLK_PD_SHIFT 0 /* BCLK_PD */
#define WM8904_BCLK_PD_WIDTH 1 /* BCLK_PD */
/*
* R127 (0x7F) - Interrupt Status
*/
#define WM8904_IRQ 0x0400 /* IRQ */
#define WM8904_IRQ_MASK 0x0400 /* IRQ */
#define WM8904_IRQ_SHIFT 10 /* IRQ */
#define WM8904_IRQ_WIDTH 1 /* IRQ */
#define WM8904_GPIO_BCLK_EINT 0x0200 /* GPIO_BCLK_EINT */
#define WM8904_GPIO_BCLK_EINT_MASK 0x0200 /* GPIO_BCLK_EINT */
#define WM8904_GPIO_BCLK_EINT_SHIFT 9 /* GPIO_BCLK_EINT */
#define WM8904_GPIO_BCLK_EINT_WIDTH 1 /* GPIO_BCLK_EINT */
#define WM8904_WSEQ_EINT 0x0100 /* WSEQ_EINT */
#define WM8904_WSEQ_EINT_MASK 0x0100 /* WSEQ_EINT */
#define WM8904_WSEQ_EINT_SHIFT 8 /* WSEQ_EINT */
#define WM8904_WSEQ_EINT_WIDTH 1 /* WSEQ_EINT */
#define WM8904_GPIO3_EINT 0x0080 /* GPIO3_EINT */
#define WM8904_GPIO3_EINT_MASK 0x0080 /* GPIO3_EINT */
#define WM8904_GPIO3_EINT_SHIFT 7 /* GPIO3_EINT */
#define WM8904_GPIO3_EINT_WIDTH 1 /* GPIO3_EINT */
#define WM8904_GPIO2_EINT 0x0040 /* GPIO2_EINT */
#define WM8904_GPIO2_EINT_MASK 0x0040 /* GPIO2_EINT */
#define WM8904_GPIO2_EINT_SHIFT 6 /* GPIO2_EINT */
#define WM8904_GPIO2_EINT_WIDTH 1 /* GPIO2_EINT */
#define WM8904_GPIO1_EINT 0x0020 /* GPIO1_EINT */
#define WM8904_GPIO1_EINT_MASK 0x0020 /* GPIO1_EINT */
#define WM8904_GPIO1_EINT_SHIFT 5 /* GPIO1_EINT */
#define WM8904_GPIO1_EINT_WIDTH 1 /* GPIO1_EINT */
#define WM8904_GPI8_EINT 0x0010 /* GPI8_EINT */
#define WM8904_GPI8_EINT_MASK 0x0010 /* GPI8_EINT */
#define WM8904_GPI8_EINT_SHIFT 4 /* GPI8_EINT */
#define WM8904_GPI8_EINT_WIDTH 1 /* GPI8_EINT */
#define WM8904_GPI7_EINT 0x0008 /* GPI7_EINT */
#define WM8904_GPI7_EINT_MASK 0x0008 /* GPI7_EINT */
#define WM8904_GPI7_EINT_SHIFT 3 /* GPI7_EINT */
#define WM8904_GPI7_EINT_WIDTH 1 /* GPI7_EINT */
#define WM8904_FLL_LOCK_EINT 0x0004 /* FLL_LOCK_EINT */
#define WM8904_FLL_LOCK_EINT_MASK 0x0004 /* FLL_LOCK_EINT */
#define WM8904_FLL_LOCK_EINT_SHIFT 2 /* FLL_LOCK_EINT */
#define WM8904_FLL_LOCK_EINT_WIDTH 1 /* FLL_LOCK_EINT */
#define WM8904_MIC_SHRT_EINT 0x0002 /* MIC_SHRT_EINT */
#define WM8904_MIC_SHRT_EINT_MASK 0x0002 /* MIC_SHRT_EINT */
#define WM8904_MIC_SHRT_EINT_SHIFT 1 /* MIC_SHRT_EINT */
#define WM8904_MIC_SHRT_EINT_WIDTH 1 /* MIC_SHRT_EINT */
#define WM8904_MIC_DET_EINT 0x0001 /* MIC_DET_EINT */
#define WM8904_MIC_DET_EINT_MASK 0x0001 /* MIC_DET_EINT */
#define WM8904_MIC_DET_EINT_SHIFT 0 /* MIC_DET_EINT */
#define WM8904_MIC_DET_EINT_WIDTH 1 /* MIC_DET_EINT */
/*
* R128 (0x80) - Interrupt Status Mask
*/
#define WM8904_IM_GPIO_BCLK_EINT 0x0200 /* IM_GPIO_BCLK_EINT */
#define WM8904_IM_GPIO_BCLK_EINT_MASK 0x0200 /* IM_GPIO_BCLK_EINT */
#define WM8904_IM_GPIO_BCLK_EINT_SHIFT 9 /* IM_GPIO_BCLK_EINT */
#define WM8904_IM_GPIO_BCLK_EINT_WIDTH 1 /* IM_GPIO_BCLK_EINT */
#define WM8904_IM_WSEQ_EINT 0x0100 /* IM_WSEQ_EINT */
#define WM8904_IM_WSEQ_EINT_MASK 0x0100 /* IM_WSEQ_EINT */
#define WM8904_IM_WSEQ_EINT_SHIFT 8 /* IM_WSEQ_EINT */
#define WM8904_IM_WSEQ_EINT_WIDTH 1 /* IM_WSEQ_EINT */
#define WM8904_IM_GPIO3_EINT 0x0080 /* IM_GPIO3_EINT */
#define WM8904_IM_GPIO3_EINT_MASK 0x0080 /* IM_GPIO3_EINT */
#define WM8904_IM_GPIO3_EINT_SHIFT 7 /* IM_GPIO3_EINT */
#define WM8904_IM_GPIO3_EINT_WIDTH 1 /* IM_GPIO3_EINT */
#define WM8904_IM_GPIO2_EINT 0x0040 /* IM_GPIO2_EINT */
#define WM8904_IM_GPIO2_EINT_MASK 0x0040 /* IM_GPIO2_EINT */
#define WM8904_IM_GPIO2_EINT_SHIFT 6 /* IM_GPIO2_EINT */
#define WM8904_IM_GPIO2_EINT_WIDTH 1 /* IM_GPIO2_EINT */
#define WM8904_IM_GPIO1_EINT 0x0020 /* IM_GPIO1_EINT */
#define WM8904_IM_GPIO1_EINT_MASK 0x0020 /* IM_GPIO1_EINT */
#define WM8904_IM_GPIO1_EINT_SHIFT 5 /* IM_GPIO1_EINT */
#define WM8904_IM_GPIO1_EINT_WIDTH 1 /* IM_GPIO1_EINT */
#define WM8904_IM_GPI8_EINT 0x0010 /* IM_GPI8_EINT */
#define WM8904_IM_GPI8_EINT_MASK 0x0010 /* IM_GPI8_EINT */
#define WM8904_IM_GPI8_EINT_SHIFT 4 /* IM_GPI8_EINT */
#define WM8904_IM_GPI8_EINT_WIDTH 1 /* IM_GPI8_EINT */
#define WM8904_IM_GPI7_EINT 0x0008 /* IM_GPI7_EINT */
#define WM8904_IM_GPI7_EINT_MASK 0x0008 /* IM_GPI7_EINT */
#define WM8904_IM_GPI7_EINT_SHIFT 3 /* IM_GPI7_EINT */
#define WM8904_IM_GPI7_EINT_WIDTH 1 /* IM_GPI7_EINT */
#define WM8904_IM_FLL_LOCK_EINT 0x0004 /* IM_FLL_LOCK_EINT */
#define WM8904_IM_FLL_LOCK_EINT_MASK 0x0004 /* IM_FLL_LOCK_EINT */
#define WM8904_IM_FLL_LOCK_EINT_SHIFT 2 /* IM_FLL_LOCK_EINT */
#define WM8904_IM_FLL_LOCK_EINT_WIDTH 1 /* IM_FLL_LOCK_EINT */
#define WM8904_IM_MIC_SHRT_EINT 0x0002 /* IM_MIC_SHRT_EINT */
#define WM8904_IM_MIC_SHRT_EINT_MASK 0x0002 /* IM_MIC_SHRT_EINT */
#define WM8904_IM_MIC_SHRT_EINT_SHIFT 1 /* IM_MIC_SHRT_EINT */
#define WM8904_IM_MIC_SHRT_EINT_WIDTH 1 /* IM_MIC_SHRT_EINT */
#define WM8904_IM_MIC_DET_EINT 0x0001 /* IM_MIC_DET_EINT */
#define WM8904_IM_MIC_DET_EINT_MASK 0x0001 /* IM_MIC_DET_EINT */
#define WM8904_IM_MIC_DET_EINT_SHIFT 0 /* IM_MIC_DET_EINT */
#define WM8904_IM_MIC_DET_EINT_WIDTH 1 /* IM_MIC_DET_EINT */
/*
* R129 (0x81) - Interrupt Polarity
*/
#define WM8904_GPIO_BCLK_EINT_POL 0x0200 /* GPIO_BCLK_EINT_POL */
#define WM8904_GPIO_BCLK_EINT_POL_MASK 0x0200 /* GPIO_BCLK_EINT_POL */
#define WM8904_GPIO_BCLK_EINT_POL_SHIFT 9 /* GPIO_BCLK_EINT_POL */
#define WM8904_GPIO_BCLK_EINT_POL_WIDTH 1 /* GPIO_BCLK_EINT_POL */
#define WM8904_WSEQ_EINT_POL 0x0100 /* WSEQ_EINT_POL */
#define WM8904_WSEQ_EINT_POL_MASK 0x0100 /* WSEQ_EINT_POL */
#define WM8904_WSEQ_EINT_POL_SHIFT 8 /* WSEQ_EINT_POL */
#define WM8904_WSEQ_EINT_POL_WIDTH 1 /* WSEQ_EINT_POL */
#define WM8904_GPIO3_EINT_POL 0x0080 /* GPIO3_EINT_POL */
#define WM8904_GPIO3_EINT_POL_MASK 0x0080 /* GPIO3_EINT_POL */
#define WM8904_GPIO3_EINT_POL_SHIFT 7 /* GPIO3_EINT_POL */
#define WM8904_GPIO3_EINT_POL_WIDTH 1 /* GPIO3_EINT_POL */
#define WM8904_GPIO2_EINT_POL 0x0040 /* GPIO2_EINT_POL */
#define WM8904_GPIO2_EINT_POL_MASK 0x0040 /* GPIO2_EINT_POL */
#define WM8904_GPIO2_EINT_POL_SHIFT 6 /* GPIO2_EINT_POL */
#define WM8904_GPIO2_EINT_POL_WIDTH 1 /* GPIO2_EINT_POL */
#define WM8904_GPIO1_EINT_POL 0x0020 /* GPIO1_EINT_POL */
#define WM8904_GPIO1_EINT_POL_MASK 0x0020 /* GPIO1_EINT_POL */
#define WM8904_GPIO1_EINT_POL_SHIFT 5 /* GPIO1_EINT_POL */
#define WM8904_GPIO1_EINT_POL_WIDTH 1 /* GPIO1_EINT_POL */
#define WM8904_GPI8_EINT_POL 0x0010 /* GPI8_EINT_POL */
#define WM8904_GPI8_EINT_POL_MASK 0x0010 /* GPI8_EINT_POL */
#define WM8904_GPI8_EINT_POL_SHIFT 4 /* GPI8_EINT_POL */
#define WM8904_GPI8_EINT_POL_WIDTH 1 /* GPI8_EINT_POL */
#define WM8904_GPI7_EINT_POL 0x0008 /* GPI7_EINT_POL */
#define WM8904_GPI7_EINT_POL_MASK 0x0008 /* GPI7_EINT_POL */
#define WM8904_GPI7_EINT_POL_SHIFT 3 /* GPI7_EINT_POL */
#define WM8904_GPI7_EINT_POL_WIDTH 1 /* GPI7_EINT_POL */
#define WM8904_FLL_LOCK_EINT_POL 0x0004 /* FLL_LOCK_EINT_POL */
#define WM8904_FLL_LOCK_EINT_POL_MASK 0x0004 /* FLL_LOCK_EINT_POL */
#define WM8904_FLL_LOCK_EINT_POL_SHIFT 2 /* FLL_LOCK_EINT_POL */
#define WM8904_FLL_LOCK_EINT_POL_WIDTH 1 /* FLL_LOCK_EINT_POL */
#define WM8904_MIC_SHRT_EINT_POL 0x0002 /* MIC_SHRT_EINT_POL */
#define WM8904_MIC_SHRT_EINT_POL_MASK 0x0002 /* MIC_SHRT_EINT_POL */
#define WM8904_MIC_SHRT_EINT_POL_SHIFT 1 /* MIC_SHRT_EINT_POL */
#define WM8904_MIC_SHRT_EINT_POL_WIDTH 1 /* MIC_SHRT_EINT_POL */
#define WM8904_MIC_DET_EINT_POL 0x0001 /* MIC_DET_EINT_POL */
#define WM8904_MIC_DET_EINT_POL_MASK 0x0001 /* MIC_DET_EINT_POL */
#define WM8904_MIC_DET_EINT_POL_SHIFT 0 /* MIC_DET_EINT_POL */
#define WM8904_MIC_DET_EINT_POL_WIDTH 1 /* MIC_DET_EINT_POL */
/*
* R130 (0x82) - Interrupt Debounce
*/
#define WM8904_GPIO_BCLK_EINT_DB 0x0200 /* GPIO_BCLK_EINT_DB */
#define WM8904_GPIO_BCLK_EINT_DB_MASK 0x0200 /* GPIO_BCLK_EINT_DB */
#define WM8904_GPIO_BCLK_EINT_DB_SHIFT 9 /* GPIO_BCLK_EINT_DB */
#define WM8904_GPIO_BCLK_EINT_DB_WIDTH 1 /* GPIO_BCLK_EINT_DB */
#define WM8904_WSEQ_EINT_DB 0x0100 /* WSEQ_EINT_DB */
#define WM8904_WSEQ_EINT_DB_MASK 0x0100 /* WSEQ_EINT_DB */
#define WM8904_WSEQ_EINT_DB_SHIFT 8 /* WSEQ_EINT_DB */
#define WM8904_WSEQ_EINT_DB_WIDTH 1 /* WSEQ_EINT_DB */
#define WM8904_GPIO3_EINT_DB 0x0080 /* GPIO3_EINT_DB */
#define WM8904_GPIO3_EINT_DB_MASK 0x0080 /* GPIO3_EINT_DB */
#define WM8904_GPIO3_EINT_DB_SHIFT 7 /* GPIO3_EINT_DB */
#define WM8904_GPIO3_EINT_DB_WIDTH 1 /* GPIO3_EINT_DB */
#define WM8904_GPIO2_EINT_DB 0x0040 /* GPIO2_EINT_DB */
#define WM8904_GPIO2_EINT_DB_MASK 0x0040 /* GPIO2_EINT_DB */
#define WM8904_GPIO2_EINT_DB_SHIFT 6 /* GPIO2_EINT_DB */
#define WM8904_GPIO2_EINT_DB_WIDTH 1 /* GPIO2_EINT_DB */
#define WM8904_GPIO1_EINT_DB 0x0020 /* GPIO1_EINT_DB */
#define WM8904_GPIO1_EINT_DB_MASK 0x0020 /* GPIO1_EINT_DB */
#define WM8904_GPIO1_EINT_DB_SHIFT 5 /* GPIO1_EINT_DB */
#define WM8904_GPIO1_EINT_DB_WIDTH 1 /* GPIO1_EINT_DB */
#define WM8904_GPI8_EINT_DB 0x0010 /* GPI8_EINT_DB */
#define WM8904_GPI8_EINT_DB_MASK 0x0010 /* GPI8_EINT_DB */
#define WM8904_GPI8_EINT_DB_SHIFT 4 /* GPI8_EINT_DB */
#define WM8904_GPI8_EINT_DB_WIDTH 1 /* GPI8_EINT_DB */
#define WM8904_GPI7_EINT_DB 0x0008 /* GPI7_EINT_DB */
#define WM8904_GPI7_EINT_DB_MASK 0x0008 /* GPI7_EINT_DB */
#define WM8904_GPI7_EINT_DB_SHIFT 3 /* GPI7_EINT_DB */
#define WM8904_GPI7_EINT_DB_WIDTH 1 /* GPI7_EINT_DB */
#define WM8904_FLL_LOCK_EINT_DB 0x0004 /* FLL_LOCK_EINT_DB */
#define WM8904_FLL_LOCK_EINT_DB_MASK 0x0004 /* FLL_LOCK_EINT_DB */
#define WM8904_FLL_LOCK_EINT_DB_SHIFT 2 /* FLL_LOCK_EINT_DB */
#define WM8904_FLL_LOCK_EINT_DB_WIDTH 1 /* FLL_LOCK_EINT_DB */
#define WM8904_MIC_SHRT_EINT_DB 0x0002 /* MIC_SHRT_EINT_DB */
#define WM8904_MIC_SHRT_EINT_DB_MASK 0x0002 /* MIC_SHRT_EINT_DB */
#define WM8904_MIC_SHRT_EINT_DB_SHIFT 1 /* MIC_SHRT_EINT_DB */
#define WM8904_MIC_SHRT_EINT_DB_WIDTH 1 /* MIC_SHRT_EINT_DB */
#define WM8904_MIC_DET_EINT_DB 0x0001 /* MIC_DET_EINT_DB */
#define WM8904_MIC_DET_EINT_DB_MASK 0x0001 /* MIC_DET_EINT_DB */
#define WM8904_MIC_DET_EINT_DB_SHIFT 0 /* MIC_DET_EINT_DB */
#define WM8904_MIC_DET_EINT_DB_WIDTH 1 /* MIC_DET_EINT_DB */
/*
* R134 (0x86) - EQ1
*/
#define WM8904_EQ_ENA 0x0001 /* EQ_ENA */
#define WM8904_EQ_ENA_MASK 0x0001 /* EQ_ENA */
#define WM8904_EQ_ENA_SHIFT 0 /* EQ_ENA */
#define WM8904_EQ_ENA_WIDTH 1 /* EQ_ENA */
/*
* R135 (0x87) - EQ2
*/
#define WM8904_EQ_B1_GAIN_MASK 0x001F /* EQ_B1_GAIN - [4:0] */
#define WM8904_EQ_B1_GAIN_SHIFT 0 /* EQ_B1_GAIN - [4:0] */
#define WM8904_EQ_B1_GAIN_WIDTH 5 /* EQ_B1_GAIN - [4:0] */
/*
* R136 (0x88) - EQ3
*/
#define WM8904_EQ_B2_GAIN_MASK 0x001F /* EQ_B2_GAIN - [4:0] */
#define WM8904_EQ_B2_GAIN_SHIFT 0 /* EQ_B2_GAIN - [4:0] */
#define WM8904_EQ_B2_GAIN_WIDTH 5 /* EQ_B2_GAIN - [4:0] */
/*
* R137 (0x89) - EQ4
*/
#define WM8904_EQ_B3_GAIN_MASK 0x001F /* EQ_B3_GAIN - [4:0] */
#define WM8904_EQ_B3_GAIN_SHIFT 0 /* EQ_B3_GAIN - [4:0] */
#define WM8904_EQ_B3_GAIN_WIDTH 5 /* EQ_B3_GAIN - [4:0] */
/*
* R138 (0x8A) - EQ5
*/
#define WM8904_EQ_B4_GAIN_MASK 0x001F /* EQ_B4_GAIN - [4:0] */
#define WM8904_EQ_B4_GAIN_SHIFT 0 /* EQ_B4_GAIN - [4:0] */
#define WM8904_EQ_B4_GAIN_WIDTH 5 /* EQ_B4_GAIN - [4:0] */
/*
* R139 (0x8B) - EQ6
*/
#define WM8904_EQ_B5_GAIN_MASK 0x001F /* EQ_B5_GAIN - [4:0] */
#define WM8904_EQ_B5_GAIN_SHIFT 0 /* EQ_B5_GAIN - [4:0] */
#define WM8904_EQ_B5_GAIN_WIDTH 5 /* EQ_B5_GAIN - [4:0] */
/*
* R140 (0x8C) - EQ7
*/
#define WM8904_EQ_B1_A_MASK 0xFFFF /* EQ_B1_A - [15:0] */
#define WM8904_EQ_B1_A_SHIFT 0 /* EQ_B1_A - [15:0] */
#define WM8904_EQ_B1_A_WIDTH 16 /* EQ_B1_A - [15:0] */
/*
* R141 (0x8D) - EQ8
*/
#define WM8904_EQ_B1_B_MASK 0xFFFF /* EQ_B1_B - [15:0] */
#define WM8904_EQ_B1_B_SHIFT 0 /* EQ_B1_B - [15:0] */
#define WM8904_EQ_B1_B_WIDTH 16 /* EQ_B1_B - [15:0] */
/*
* R142 (0x8E) - EQ9
*/
#define WM8904_EQ_B1_PG_MASK 0xFFFF /* EQ_B1_PG - [15:0] */
#define WM8904_EQ_B1_PG_SHIFT 0 /* EQ_B1_PG - [15:0] */
#define WM8904_EQ_B1_PG_WIDTH 16 /* EQ_B1_PG - [15:0] */
/*
* R143 (0x8F) - EQ10
*/
#define WM8904_EQ_B2_A_MASK 0xFFFF /* EQ_B2_A - [15:0] */
#define WM8904_EQ_B2_A_SHIFT 0 /* EQ_B2_A - [15:0] */
#define WM8904_EQ_B2_A_WIDTH 16 /* EQ_B2_A - [15:0] */
/*
* R144 (0x90) - EQ11
*/
#define WM8904_EQ_B2_B_MASK 0xFFFF /* EQ_B2_B - [15:0] */
#define WM8904_EQ_B2_B_SHIFT 0 /* EQ_B2_B - [15:0] */
#define WM8904_EQ_B2_B_WIDTH 16 /* EQ_B2_B - [15:0] */
/*
* R145 (0x91) - EQ12
*/
#define WM8904_EQ_B2_C_MASK 0xFFFF /* EQ_B2_C - [15:0] */
#define WM8904_EQ_B2_C_SHIFT 0 /* EQ_B2_C - [15:0] */
#define WM8904_EQ_B2_C_WIDTH 16 /* EQ_B2_C - [15:0] */
/*
* R146 (0x92) - EQ13
*/
#define WM8904_EQ_B2_PG_MASK 0xFFFF /* EQ_B2_PG - [15:0] */
#define WM8904_EQ_B2_PG_SHIFT 0 /* EQ_B2_PG - [15:0] */
#define WM8904_EQ_B2_PG_WIDTH 16 /* EQ_B2_PG - [15:0] */
/*
* R147 (0x93) - EQ14
*/
#define WM8904_EQ_B3_A_MASK 0xFFFF /* EQ_B3_A - [15:0] */
#define WM8904_EQ_B3_A_SHIFT 0 /* EQ_B3_A - [15:0] */
#define WM8904_EQ_B3_A_WIDTH 16 /* EQ_B3_A - [15:0] */
/*
* R148 (0x94) - EQ15
*/
#define WM8904_EQ_B3_B_MASK 0xFFFF /* EQ_B3_B - [15:0] */
#define WM8904_EQ_B3_B_SHIFT 0 /* EQ_B3_B - [15:0] */
#define WM8904_EQ_B3_B_WIDTH 16 /* EQ_B3_B - [15:0] */
/*
* R149 (0x95) - EQ16
*/
#define WM8904_EQ_B3_C_MASK 0xFFFF /* EQ_B3_C - [15:0] */
#define WM8904_EQ_B3_C_SHIFT 0 /* EQ_B3_C - [15:0] */
#define WM8904_EQ_B3_C_WIDTH 16 /* EQ_B3_C - [15:0] */
/*
* R150 (0x96) - EQ17
*/
#define WM8904_EQ_B3_PG_MASK 0xFFFF /* EQ_B3_PG - [15:0] */
#define WM8904_EQ_B3_PG_SHIFT 0 /* EQ_B3_PG - [15:0] */
#define WM8904_EQ_B3_PG_WIDTH 16 /* EQ_B3_PG - [15:0] */
/*
* R151 (0x97) - EQ18
*/
#define WM8904_EQ_B4_A_MASK 0xFFFF /* EQ_B4_A - [15:0] */
#define WM8904_EQ_B4_A_SHIFT 0 /* EQ_B4_A - [15:0] */
#define WM8904_EQ_B4_A_WIDTH 16 /* EQ_B4_A - [15:0] */
/*
* R152 (0x98) - EQ19
*/
#define WM8904_EQ_B4_B_MASK 0xFFFF /* EQ_B4_B - [15:0] */
#define WM8904_EQ_B4_B_SHIFT 0 /* EQ_B4_B - [15:0] */
#define WM8904_EQ_B4_B_WIDTH 16 /* EQ_B4_B - [15:0] */
/*
* R153 (0x99) - EQ20
*/
#define WM8904_EQ_B4_C_MASK 0xFFFF /* EQ_B4_C - [15:0] */
#define WM8904_EQ_B4_C_SHIFT 0 /* EQ_B4_C - [15:0] */
#define WM8904_EQ_B4_C_WIDTH 16 /* EQ_B4_C - [15:0] */
/*
* R154 (0x9A) - EQ21
*/
#define WM8904_EQ_B4_PG_MASK 0xFFFF /* EQ_B4_PG - [15:0] */
#define WM8904_EQ_B4_PG_SHIFT 0 /* EQ_B4_PG - [15:0] */
#define WM8904_EQ_B4_PG_WIDTH 16 /* EQ_B4_PG - [15:0] */
/*
* R155 (0x9B) - EQ22
*/
#define WM8904_EQ_B5_A_MASK 0xFFFF /* EQ_B5_A - [15:0] */
#define WM8904_EQ_B5_A_SHIFT 0 /* EQ_B5_A - [15:0] */
#define WM8904_EQ_B5_A_WIDTH 16 /* EQ_B5_A - [15:0] */
/*
* R156 (0x9C) - EQ23
*/
#define WM8904_EQ_B5_B_MASK 0xFFFF /* EQ_B5_B - [15:0] */
#define WM8904_EQ_B5_B_SHIFT 0 /* EQ_B5_B - [15:0] */
#define WM8904_EQ_B5_B_WIDTH 16 /* EQ_B5_B - [15:0] */
/*
* R157 (0x9D) - EQ24
*/
#define WM8904_EQ_B5_PG_MASK 0xFFFF /* EQ_B5_PG - [15:0] */
#define WM8904_EQ_B5_PG_SHIFT 0 /* EQ_B5_PG - [15:0] */
#define WM8904_EQ_B5_PG_WIDTH 16 /* EQ_B5_PG - [15:0] */
/*
* R161 (0xA1) - Control Interface Test 1
*/
#define WM8904_USER_KEY 0x0002 /* USER_KEY */
#define WM8904_USER_KEY_MASK 0x0002 /* USER_KEY */
#define WM8904_USER_KEY_SHIFT 1 /* USER_KEY */
#define WM8904_USER_KEY_WIDTH 1 /* USER_KEY */
/*
* R198 (0xC6) - ADC Test 0
*/
#define WM8904_ADC_128_OSR_TST_MODE 0x0004 /* ADC_128_OSR_TST_MODE */
#define WM8904_ADC_128_OSR_TST_MODE_SHIFT 2 /* ADC_128_OSR_TST_MODE */
#define WM8904_ADC_128_OSR_TST_MODE_WIDTH 1 /* ADC_128_OSR_TST_MODE */
#define WM8904_ADC_BIASX1P5 0x0001 /* ADC_BIASX1P5 */
#define WM8904_ADC_BIASX1P5_SHIFT 0 /* ADC_BIASX1P5 */
#define WM8904_ADC_BIASX1P5_WIDTH 1 /* ADC_BIASX1P5 */
/*
* R204 (0xCC) - Analogue Output Bias 0
*/
#define WM8904_PGA_BIAS_MASK 0x0070 /* PGA_BIAS - [6:4] */
#define WM8904_PGA_BIAS_SHIFT 4 /* PGA_BIAS - [6:4] */
#define WM8904_PGA_BIAS_WIDTH 3 /* PGA_BIAS - [6:4] */
/*
* R247 (0xF7) - FLL NCO Test 0
*/
#define WM8904_FLL_FRC_NCO 0x0001 /* FLL_FRC_NCO */
#define WM8904_FLL_FRC_NCO_MASK 0x0001 /* FLL_FRC_NCO */
#define WM8904_FLL_FRC_NCO_SHIFT 0 /* FLL_FRC_NCO */
#define WM8904_FLL_FRC_NCO_WIDTH 1 /* FLL_FRC_NCO */
/*
* R248 (0xF8) - FLL NCO Test 1
*/
#define WM8904_FLL_FRC_NCO_VAL_MASK 0x003F /* FLL_FRC_NCO_VAL - [5:0] */
#define WM8904_FLL_FRC_NCO_VAL_SHIFT 0 /* FLL_FRC_NCO_VAL - [5:0] */
#define WM8904_FLL_FRC_NCO_VAL_WIDTH 6 /* FLL_FRC_NCO_VAL - [5:0] */
#endif
^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#20266: Emacs doesn't respond when editing the attached c header file.
[not found] ` <mailman.71.1428315070.904.bug-gnu-emacs@gnu.org>
@ 2015-04-07 15:16 ` Alan Mackenzie
2015-04-12 2:15 ` 张海君
0 siblings, 1 reply; 5+ messages in thread
From: Alan Mackenzie @ 2015-04-07 15:16 UTC (permalink / raw)
To: ???, 20266
Hello, Netjune.
In article <mailman.71.1428315070.904.bug-gnu-emacs@gnu.org> you wrote:
> [-- text/plain, encoding 7bit, charset: us-ascii, 13 lines --]
> Emacs doesn't respond when editing the attached c header file.
> Emacs version: 24.4.
> ------------------------------------
> Run emacs with "emacs -Q test.h".
> M-x mark-whole-buffer
> M-x kill-ring-save
> M-x end-of-buffer
> M-x yank
> Then emacs doesn't respond for about 5 seconds.
> M-x scroll-down-command.
> Then emacs doesn't respond for about 5 seconds too.
Yes. This isn't good at all.
> M-x scroll-down-command.
> Then emacs doesn't respond for about 5 seconds too.
I can't actually reproduce this delay.
There is special handling on `yank' for some arcane mechanisms in Emacs,
and these simply waste time in CC Mode for no productive purpose. The
patch below should switch off this processing.
diff -r 5cc874770a5d cc-mode.el
--- a/cc-mode.el Tue Apr 07 10:25:37 2015 +0000
+++ b/cc-mode.el Tue Apr 07 14:58:37 2015 +0000
@@ -502,6 +502,7 @@
(make-local-variable 'adaptive-fill-mode)
(make-local-variable 'adaptive-fill-regexp)
(make-local-variable 'fill-paragraph-handle-comment)
+ (make-local-variable 'yank-handled-properties)
;; now set their values
(setq parse-sexp-ignore-comments t
@@ -511,6 +512,12 @@
comment-multi-line t
comment-line-break-function 'c-indent-new-comment-line)
+ ;; Prevent time-wasting activity on C-y.
+ (let ((yank-cat-handler (assq 'category yank-handled-properties)))
+ (when yank-cat-handler
+ (setq yank-handled-properties (remq yank-cat-handler
+ yank-handled-properties))))
+
;; For the benefit of adaptive file, which otherwise mis-fills.
(setq fill-paragraph-handle-comment nil)
Please try applying this patch to .../emacs/lisp/progmodes/cc-mode.el,
then recompiling that file with either:
(on the command line):
$ emacs -Q -batch -f batch-byte-compile .../path/to/cc-mode.el
, or (from within Emacs):
M-x byte-compile-file <CR> .../path/to/cc-mode.el.
Either load this file (with M-x load-file) or restart Emacs. Hopefully
the first problem (with M-x yank) will have gone away.
Could you please get back to me and confirm that the M-x yank delay has
gone, and let me know whether the delay on M-x scroll-down-command is
still a problem.
Thanks for taking the trouble to report this bug.
--
Alan Mackenzie (Nuremberg, Germany).
^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#20266: Emacs doesn't respond when editing the attached c header file.
2015-04-07 15:16 ` Alan Mackenzie
@ 2015-04-12 2:15 ` 张海君
2015-04-21 16:14 ` Alan Mackenzie
0 siblings, 1 reply; 5+ messages in thread
From: 张海君 @ 2015-04-12 2:15 UTC (permalink / raw)
To: Alan Mackenzie; +Cc: 20266
> 在 2015年4月7日，23:16，Alan Mackenzie <acm@muc.de> 写道：
>
> Hello, Netjune.
>
> In article <mailman.71.1428315070.904.bug-gnu-emacs@gnu.org> you wrote:
>> [-- text/plain, encoding 7bit, charset: us-ascii, 13 lines --]
>
>> Emacs doesn't respond when editing the attached c header file.
>> Emacs version: 24.4.
>
>> ------------------------------------
>> Run emacs with "emacs -Q test.h".
>> M-x mark-whole-buffer
>> M-x kill-ring-save
>> M-x end-of-buffer
>> M-x yank
>> Then emacs doesn't respond for about 5 seconds.
>> M-x scroll-down-command.
>> Then emacs doesn't respond for about 5 seconds too.
>
> Yes. This isn't good at all.
>
>> M-x scroll-down-command.
>> Then emacs doesn't respond for about 5 seconds too.
>
> I can't actually reproduce this delay.
Try do it more than 4 times, like: M-> M-v M-v M-v M-v M-v.
The delay often happens at the first M-v, but not always.
The delay is about 5 seconds on mac OSX (cpu: 1.4GHz), and is about 2 seconds on linux (cpu: 2.53Ghz).
Or try to input some text (like newline chars) at the end of buffer.
I input a newline at the end of buffer, and emacs didn't respond about 2 seconds on linux.
After apply the patch, there is no delay after yank.
^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#20266: Emacs doesn't respond when editing the attached c header file.
2015-04-12 2:15 ` 张海君
@ 2015-04-21 16:14 ` Alan Mackenzie
2015-04-25 21:11 ` Alan Mackenzie
0 siblings, 1 reply; 5+ messages in thread
From: Alan Mackenzie @ 2015-04-21 16:14 UTC (permalink / raw)
To: 张海君; +Cc: 20266
Hello, Netjune.
On Sun, Apr 12, 2015 at 10:15:15AM +0800, 张海君 wrote:
> > 在 2015年4月7日，23:16，Alan Mackenzie <acm@muc.de> 写道：
> > In article <mailman.71.1428315070.904.bug-gnu-emacs@gnu.org> you wrote:
> >> [-- text/plain, encoding 7bit, charset: us-ascii, 13 lines --]
> >> Emacs doesn't respond when editing the attached c header file.
> >> Emacs version: 24.4.
> >> ------------------------------------
> >> Run emacs with "emacs -Q test.h".
> >> M-x mark-whole-buffer
> >> M-x kill-ring-save
> >> M-x end-of-buffer
> >> M-x yank
> >> Then emacs doesn't respond for about 5 seconds.
> >> M-x scroll-down-command.
> >> Then emacs doesn't respond for about 5 seconds too.
> > Yes. This isn't good at all.
> >> M-x scroll-down-command.
> >> Then emacs doesn't respond for about 5 seconds too.
> > I can't actually reproduce this delay.
> Try do it more than 4 times, like: M-> M-v M-v M-v M-v M-v.
> The delay often happens at the first M-v, but not always.
> The delay is about 5 seconds on mac OSX (cpu: 1.4GHz), and is about 2 seconds on linux (cpu: 2.53Ghz).
After applying the patch below, I measured a single M-v from the end of
the buffer, and it took 0.14s. This is on GNU/Linux on a 5 year old PC
(2.6 GHz processor).
> Or try to input some text (like newline chars) at the end of buffer.
> I input a newline at the end of buffer, and emacs didn't respond about 2 seconds on linux.
Yes. That is a different kettle of fish altogether.
> After apply the patch, there is no delay after yank.
Thanks. With the following patch (instead of the first one) there
shouldn't be much delay with C-x u after having done the yank.
The patch is calculated in Emacs-24.4. Please try it out.
--- cc-mode.el.orig 2014-03-21 05:34:40.000000000 +0000
+++ cc-mode.el 2015-04-21 14:33:55.571993081 +0000
@@ -509,6 +509,14 @@
(set (make-local-variable 'comment-line-break-function)
'c-indent-new-comment-line)
+ ;; Prevent time-wasting activity on C-y.
+ (when (boundp 'yank-handled-properties)
+ (make-local-variable 'yank-handled-properties)
+ (let ((yank-cat-handler (assq 'category yank-handled-properties)))
+ (when yank-cat-handler
+ (setq yank-handled-properties (remq yank-cat-handler
+ yank-handled-properties)))))
+
;; For the benefit of adaptive file, which otherwise mis-fills.
(setq fill-paragraph-handle-comment nil)
@@ -831,6 +839,18 @@
(defvar c-old-EOM 0)
(make-variable-buffer-local 'c-old-EOM)
+(defun c-called-from-text-property-change-p ()
+ ;; Is the primitive which invoked `before-change-functions' or
+ ;; `after-change-functions' one which merely changes text properties? This
+ ;; function must be called directly from a member of one of the above hooks.
+ ;;
+ ;; In the following call, frame 0 is `backtrace-frame', frame 1 is
+ ;; `c-called-from-text-property-change-p', frame 2 is
+ ;; `c-before/after-change', frame 3 is the primitive invoking the change
+ ;; hook.
+ (memq (cadr (backtrace-frame 3))
+ '(put-text-property remove-list-of-text-properties)))
+
(defun c-extend-region-for-CPP (beg end)
;; Set c-old-BOM or c-old-EOM respectively to BEG, END, each extended to the
;; beginning/end of any preprocessor construct they may be in.
@@ -988,64 +1008,65 @@
;; it/them from the cache. Don't worry about being inside a string
;; or a comment - "wrongly" removing a symbol from `c-found-types'
;; isn't critical.
- (setq c-maybe-stale-found-type nil)
- (save-restriction
- (save-match-data
- (widen)
- (save-excursion
- ;; Are we inserting/deleting stuff in the middle of an identifier?
- (c-unfind-enclosing-token beg)
- (c-unfind-enclosing-token end)
- ;; Are we coalescing two tokens together, e.g. "fo o" -> "foo"?
- (when (< beg end)
- (c-unfind-coalesced-tokens beg end))
- ;; Are we (potentially) disrupting the syntactic context which
- ;; makes a type a type? E.g. by inserting stuff after "foo" in
- ;; "foo bar;", or before "foo" in "typedef foo *bar;"?
- ;;
- ;; We search for appropriate c-type properties "near" the change.
- ;; First, find an appropriate boundary for this property search.
- (let (lim
- type type-pos
- marked-id term-pos
- (end1
- (or (and (eq (get-text-property end 'face) 'font-lock-comment-face)
- (previous-single-property-change end 'face))
- end)))
- (when (>= end1 beg) ; Don't hassle about changes entirely in comments.
- ;; Find a limit for the search for a `c-type' property
- (while
- (and (/= (skip-chars-backward "^;{}") 0)
- (> (point) (point-min))
- (memq (c-get-char-property (1- (point)) 'face)
- '(font-lock-comment-face font-lock-string-face))))
- (setq lim (max (point-min) (1- (point))))
-
- ;; Look for the latest `c-type' property before end1
- (when (and (> end1 (point-min))
- (setq type-pos
- (if (get-text-property (1- end1) 'c-type)
- end1
- (previous-single-property-change end1 'c-type nil lim))))
- (setq type (get-text-property (max (1- type-pos) lim) 'c-type))
-
- (when (memq type '(c-decl-id-start c-decl-type-start))
- ;; Get the identifier, if any, that the property is on.
- (goto-char (1- type-pos))
- (setq marked-id
- (when (looking-at "\\(\\sw\\|\\s_\\)")
- (c-beginning-of-current-token)
- (buffer-substring-no-properties (point) type-pos)))
-
- (goto-char end1)
- (skip-chars-forward "^;{}") ; FIXME!!! loop for comment, maybe
- (setq lim (point))
- (setq term-pos
- (or (next-single-property-change end 'c-type nil lim) lim))
- (setq c-maybe-stale-found-type
- (list type marked-id
- type-pos term-pos
- (buffer-substring-no-properties type-pos term-pos)
+ (unless (c-called-from-text-property-change-p)
+ (setq c-maybe-stale-found-type nil)
+ (save-restriction
+ (save-match-data
+ (widen)
+ (save-excursion
+ ;; Are we inserting/deleting stuff in the middle of an identifier?
+ (c-unfind-enclosing-token beg)
+ (c-unfind-enclosing-token end)
+ ;; Are we coalescing two tokens together, e.g. "fo o" -> "foo"?
+ (when (< beg end)
+ (c-unfind-coalesced-tokens beg end))
+ ;; Are we (potentially) disrupting the syntactic context which
+ ;; makes a type a type? E.g. by inserting stuff after "foo" in
+ ;; "foo bar;", or before "foo" in "typedef foo *bar;"?
+ ;;
+ ;; We search for appropriate c-type properties "near" the change.
+ ;; First, find an appropriate boundary for this property search.
+ (let (lim
+ type type-pos
+ marked-id term-pos
+ (end1
+ (or (and (eq (get-text-property end 'face) 'font-lock-comment-face)
+ (previous-single-property-change end 'face))
+ end)))
+ (when (>= end1 beg) ; Don't hassle about changes entirely in comments.
+ ;; Find a limit for the search for a `c-type' property
+ (while
+ (and (/= (skip-chars-backward "^;{}") 0)
+ (> (point) (point-min))
+ (memq (c-get-char-property (1- (point)) 'face)
+ '(font-lock-comment-face font-lock-string-face))))
+ (setq lim (max (point-min) (1- (point))))
+
+ ;; Look for the latest `c-type' property before end1
+ (when (and (> end1 (point-min))
+ (setq type-pos
+ (if (get-text-property (1- end1) 'c-type)
+ end1
+ (previous-single-property-change end1 'c-type nil lim))))
+ (setq type (get-text-property (max (1- type-pos) lim) 'c-type))
+
+ (when (memq type '(c-decl-id-start c-decl-type-start))
+ ;; Get the identifier, if any, that the property is on.
+ (goto-char (1- type-pos))
+ (setq marked-id
+ (when (looking-at "\\(\\sw\\|\\s_\\)")
+ (c-beginning-of-current-token)
+ (buffer-substring-no-properties (point) type-pos)))
+
+ (goto-char end1)
+ (skip-chars-forward "^;{}") ; FIXME!!! loop for comment, maybe
+ (setq lim (point))
+ (setq term-pos
+ (or (next-single-property-change end 'c-type nil lim) lim))
+ (setq c-maybe-stale-found-type
+ (list type marked-id
+ type-pos term-pos
+ (buffer-substring-no-properties type-pos term-pos)
(buffer-substring-no-properties beg end)))))))
(if c-get-state-before-change-functions
@@ -1056,7 +1077,7 @@
)))
;; The following must be done here rather than in `c-after-change' because
;; newly inserted parens would foul up the invalidation algorithm.
- (c-invalidate-state-cache beg))
+ (c-invalidate-state-cache beg)))
(defvar c-in-after-change-fontification nil)
(make-variable-buffer-local 'c-in-after-change-fontification)
@@ -1077,49 +1098,51 @@
;; This calls the language variable c-before-font-lock-functions, if non nil.
;; This typically sets `syntax-table' properties.
- (c-save-buffer-state (case-fold-search open-paren-in-column-0-is-defun-start)
- ;; When `combine-after-change-calls' is used we might get calls
- ;; with regions outside the current narrowing. This has been
- ;; observed in Emacs 20.7.
- (save-restriction
- (save-match-data ; c-recognize-<>-arglists changes match-data
- (widen)
-
- (when (> end (point-max))
- ;; Some emacsen might return positions past the end. This has been
- ;; observed in Emacs 20.7 when rereading a buffer changed on disk
- ;; (haven't been able to minimize it, but Emacs 21.3 appears to
- ;; work).
- (setq end (point-max))
- (when (> beg end)
- (setq beg end)))
-
- ;; C-y is capable of spuriously converting category properties
- ;; c-</>-as-paren-syntax and c-cpp-delimiter into hard syntax-table
- ;; properties. Remove these when it happens.
- (c-clear-char-property-with-value beg end 'syntax-table
- c-<-as-paren-syntax)
- (c-clear-char-property-with-value beg end 'syntax-table
- c->-as-paren-syntax)
- (c-clear-char-property-with-value beg end 'syntax-table nil)
-
- (c-trim-found-types beg end old-len) ; maybe we don't need all of these.
- (c-invalidate-sws-region-after beg end)
- ;; (c-invalidate-state-cache beg) ; moved to `c-before-change'.
- (c-invalidate-find-decl-cache beg)
-
- (when c-recognize-<>-arglists
- (c-after-change-check-<>-operators beg end))
-
- ;; (c-new-BEG c-new-END) will be the region to fontify. It may become
- ;; larger than (beg end).
- (setq c-new-BEG beg
- c-new-END end)
- (setq c-in-after-change-fontification t)
- (save-excursion
- (mapc (lambda (fn)
- (funcall fn beg end old-len))
- c-before-font-lock-functions))))))
+ ;; (c-new-BEG c-new-END) will be the region to fontify. It may become
+ ;; larger than (beg end).
+ (setq c-new-BEG beg c-new-END end)
+
+ (unless (c-called-from-text-property-change-p)
+ (c-save-buffer-state (case-fold-search open-paren-in-column-0-is-defun-start)
+ ;; When `combine-after-change-calls' is used we might get calls
+ ;; with regions outside the current narrowing. This has been
+ ;; observed in Emacs 20.7.
+ (save-restriction
+ (save-match-data ; c-recognize-<>-arglists changes match-data
+ (widen)
+
+ (when (> end (point-max))
+ ;; Some emacsen might return positions past the end. This has been
+ ;; observed in Emacs 20.7 when rereading a buffer changed on disk
+ ;; (haven't been able to minimize it, but Emacs 21.3 appears to
+ ;; work).
+ (setq end (point-max))
+ (when (> beg end)
+ (setq beg end)))
+
+ ;; C-y is capable of spuriously converting category properties
+ ;; c-</>-as-paren-syntax and c-cpp-delimiter into hard syntax-table
+ ;; properties. Remove these when it happens.
+ (c-save-buffer-state ()
+ (c-clear-char-property-with-value beg end 'syntax-table
+ c-<-as-paren-syntax)
+ (c-clear-char-property-with-value beg end 'syntax-table
+ c->-as-paren-syntax)
+ (c-clear-char-property-with-value beg end 'syntax-table nil))
+
+ (c-trim-found-types beg end old-len) ; maybe we don't need all of these.
+ (c-invalidate-sws-region-after beg end)
+ ;; (c-invalidate-state-cache beg) ; moved to `c-before-change'.
+ (c-invalidate-find-decl-cache beg)
+
+ (when c-recognize-<>-arglists
+ (c-after-change-check-<>-operators beg end))
+
+ (setq c-in-after-change-fontification t)
+ (save-excursion
+ (mapc (lambda (fn)
+ (funcall fn beg end old-len))
+ c-before-font-lock-functions)))))))
(defun c-set-fl-decl-start (pos)
;; If the beginning of the line containing POS is in the middle of a "local"
--
Alan Mackenzie (Nuremberg, Germany).
^ permalink raw reply [flat|nested] 5+ messages in thread
* bug#20266: Emacs doesn't respond when editing the attached c header file.
2015-04-21 16:14 ` Alan Mackenzie
@ 2015-04-25 21:11 ` Alan Mackenzie
0 siblings, 0 replies; 5+ messages in thread
From: Alan Mackenzie @ 2015-04-25 21:11 UTC (permalink / raw)
To: 20266-done; +Cc: � � �
Bug fixed.
--
Alan Mackenzie (Nuremberg, Germany).
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-04-25 21:11 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-04-06 10:09 bug#20266: Emacs doesn't respond when editing the attached c header file 张海君
[not found] ` <mailman.71.1428315070.904.bug-gnu-emacs@gnu.org>
2015-04-07 15:16 ` Alan Mackenzie
2015-04-12 2:15 ` 张海君
2015-04-21 16:14 ` Alan Mackenzie
2015-04-25 21:11 ` Alan Mackenzie
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).