* strange behavior for export
@ 2010-04-30 17:01 Erik Butz
2010-05-01 11:57 ` Carsten Dominik
0 siblings, 1 reply; 4+ messages in thread
From: Erik Butz @ 2010-04-30 17:01 UTC (permalink / raw)
To: emacs-orgmode
Hi all,
I have the following problem:
I have set up my emacs so as to use org-mode uncompiled from a local directory
# from .emacs
(setq load-path (cons "~/elisp/org-mode/lisp" load-path))
(setq load-path (cons "~/elisp/org-mode/contrib/lisp" load-path))
starting emacs22 or 23 and displaying M-x org-version I get:
Org-mode version 6.35trans (release_6.35g.207.g7f085)
so indeed the version from the local directory.
when I take a document with the following preamble:
#+LaTeX_CLASS: beamer
#+TITLE: present.org
#+AUTHOR: Erik
#+EMAIL: erik@eddie
#+DATE: 2010-04-08 Thu
#+DESCRIPTION:
#+KEYWORDS:
#+LANGUAGE: en
#+OPTIONS: H:3 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
#+OPTIONS: TeX:t LaTeX:nil skip:nil d:nil todo:t pri:nil tags:not-in-toc
#+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0
path:http://orgmode.org/org-info.js
#+EXPORT_SELECT_TAGS: export
#+EXPORT_EXCLUDE_TAGS: noexport
#+LINK_UP:
#+LINK_HOME:
and export this to latex I get the following:
\documentclass[11pt,a4paper]{article}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{graphicx}
\usepackage{hyperref}
\title{present.org}
\author{Erik}
\date{2010-04-08 Thu}
\begin{document}
\maketitle
\setcounter{tocdepth}{3}
\tableofcontents
\end{document}
so despite the #+LaTeX_CLASS: beamer, the document gets exported as
'article'. Even worse, when I try to export the same document again
afterwards, I get a:
No definition for class `beamer' in `org-export-latex-classes'
error.
When I issue a 'reload-org-uncompiled' directly after starting emacs,
this behavior does not occur.
In this case I get, as expected:
\documentclass{beamer}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{fixltx2e}
\usepackage{graphicx}
\usepackage{longtable}
\usepackage{float}
\usepackage{wrapfig}
\usepackage{soul}
\usepackage{t1enc}
\usepackage{textcomp}
\usepackage{marvosym}
\usepackage{wasysym}
\usepackage{latexsym}
\usepackage{amssymb}
\usepackage{hyperref}
\tolerance=1000
\providecommand{\alert}[1]{\textbf{#1}}
\title{present.org}
\author{Erik}
\date{2010-04-08 Thu}
\begin{document}
\maketitle
\begin{frame}
\frametitle{Outline}
\setcounter{tocdepth}{3}
\tableofcontents
\end{frame}
\end{document}
any hints appreciated on how this behavior comes about.
Cheers,
Erik
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: strange behavior for export
2010-04-30 17:01 strange behavior for export Erik Butz
@ 2010-05-01 11:57 ` Carsten Dominik
2010-05-01 12:46 ` Robert Klein
0 siblings, 1 reply; 4+ messages in thread
From: Carsten Dominik @ 2010-05-01 11:57 UTC (permalink / raw)
To: Erik Butz; +Cc: emacs-orgmode
Hi Eric,
I think this could mean two things. Most likely org is loading
some other version of org-latex.el. One way to find out is to run M-x
list-load-path-shadows.
Another possibility is that you have somewhere a configuration setting
of org-export-latex-classes that is old and does not contain the
beamer class definition, and somehow that setting is loaded before org-
latex.el is loaded.
HTH
- Carsten
On Apr 30, 2010, at 7:01 PM, Erik Butz wrote:
> Hi all,
>
> I have the following problem:
>
> I have set up my emacs so as to use org-mode uncompiled from a local
> directory
>
> # from .emacs
> (setq load-path (cons "~/elisp/org-mode/lisp" load-path))
> (setq load-path (cons "~/elisp/org-mode/contrib/lisp" load-path))
>
>
> starting emacs22 or 23 and displaying M-x org-version I get:
>
> Org-mode version 6.35trans (release_6.35g.207.g7f085)
>
> so indeed the version from the local directory.
>
> when I take a document with the following preamble:
>
> #+LaTeX_CLASS: beamer
> #+TITLE: present.org
> #+AUTHOR: Erik
> #+EMAIL: erik@eddie
> #+DATE: 2010-04-08 Thu
> #+DESCRIPTION:
> #+KEYWORDS:
> #+LANGUAGE: en
> #+OPTIONS: H:3 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
> #+OPTIONS: TeX:t LaTeX:nil skip:nil d:nil todo:t pri:nil tags:not-
> in-toc
> #+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0
> path:http://orgmode.org/org-info.js
> #+EXPORT_SELECT_TAGS: export
> #+EXPORT_EXCLUDE_TAGS: noexport
> #+LINK_UP:
> #+LINK_HOME:
>
> and export this to latex I get the following:
>
>
> \documentclass[11pt,a4paper]{article}
> \usepackage[utf8]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{graphicx}
> \usepackage{hyperref}
>
>
> \title{present.org}
> \author{Erik}
> \date{2010-04-08 Thu}
>
> \begin{document}
>
> \maketitle
>
> \setcounter{tocdepth}{3}
> \tableofcontents
>
>
> \end{document}
>
> so despite the #+LaTeX_CLASS: beamer, the document gets exported as
> 'article'. Even worse, when I try to export the same document again
> afterwards, I get a:
> No definition for class `beamer' in `org-export-latex-classes'
>
> error.
>
> When I issue a 'reload-org-uncompiled' directly after starting emacs,
> this behavior does not occur.
>
> In this case I get, as expected:
>
> \documentclass{beamer}
> \usepackage[utf8]{inputenc}
> \usepackage[T1]{fontenc}
> \usepackage{fixltx2e}
> \usepackage{graphicx}
> \usepackage{longtable}
> \usepackage{float}
> \usepackage{wrapfig}
> \usepackage{soul}
> \usepackage{t1enc}
> \usepackage{textcomp}
> \usepackage{marvosym}
> \usepackage{wasysym}
> \usepackage{latexsym}
> \usepackage{amssymb}
> \usepackage{hyperref}
> \tolerance=1000
> \providecommand{\alert}[1]{\textbf{#1}}
>
> \title{present.org}
> \author{Erik}
> \date{2010-04-08 Thu}
>
> \begin{document}
>
> \maketitle
>
> \begin{frame}
> \frametitle{Outline}
> \setcounter{tocdepth}{3}
> \tableofcontents
> \end{frame}
>
> \end{document}
>
>
> any hints appreciated on how this behavior comes about.
>
> Cheers,
>
> Erik
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
- Carsten
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: strange behavior for export
2010-05-01 11:57 ` Carsten Dominik
@ 2010-05-01 12:46 ` Robert Klein
2010-05-13 5:21 ` Carsten Dominik
0 siblings, 1 reply; 4+ messages in thread
From: Robert Klein @ 2010-05-01 12:46 UTC (permalink / raw)
To: Carsten Dominik, Erik Butz; +Cc: emacs-orgmode
Eric,
where in your .emacs is the (require 'org-install) command?
In one of my setups I had it before the load-paths.
I didn't notice, because of an older version of org-mode
bundled with emacs; org-version reports the new version
but that is not what my emacs used in exporting.
Carsten,
is there a reason why the manual says I should do the 'make'
after it talks about load-path but before it tells me to put
(require 'org-install) into the .emacs-file?
I should know better, but I still managed to confuse one of
my .emacs-files when I started using org-mode.
Best regards
Robert
On Sat, 01 May 2010 13:57:17 +0200, Carsten Dominik
<carsten.dominik@gmail.com> wrote:
> Hi Eric,
>
> I think this could mean two things. Most likely org is loading
> some other version of org-latex.el. One way to find out is to run M-x
> list-load-path-shadows.
>
> Another possibility is that you have somewhere a configuration setting
> of org-export-latex-classes that is old and does not contain the beamer
> class definition, and somehow that setting is loaded before org-latex.el
> is loaded.
>
> HTH
>
> - Carsten
>
> On Apr 30, 2010, at 7:01 PM, Erik Butz wrote:
>
>> Hi all,
>>
>> I have the following problem:
>>
>> I have set up my emacs so as to use org-mode uncompiled from a local
>> directory
>>
>> # from .emacs
>> (setq load-path (cons "~/elisp/org-mode/lisp" load-path))
>> (setq load-path (cons "~/elisp/org-mode/contrib/lisp" load-path))
>>
>>
>> starting emacs22 or 23 and displaying M-x org-version I get:
>>
>> Org-mode version 6.35trans (release_6.35g.207.g7f085)
>>
>> so indeed the version from the local directory.
>>
>> when I take a document with the following preamble:
>>
>> #+LaTeX_CLASS: beamer
>> #+TITLE: present.org
>> #+AUTHOR: Erik
>> #+EMAIL: erik@eddie
>> #+DATE: 2010-04-08 Thu
>> #+DESCRIPTION:
>> #+KEYWORDS:
>> #+LANGUAGE: en
>> #+OPTIONS: H:3 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
>> #+OPTIONS: TeX:t LaTeX:nil skip:nil d:nil todo:t pri:nil tags:not-
>> in-toc
>> #+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0
>> path:http://orgmode.org/org-info.js
>> #+EXPORT_SELECT_TAGS: export
>> #+EXPORT_EXCLUDE_TAGS: noexport
>> #+LINK_UP:
>> #+LINK_HOME:
>>
>> and export this to latex I get the following:
>>
>>
>> \documentclass[11pt,a4paper]{article}
[ something deleted ]
>>
>> \end{document}
>>
>> so despite the #+LaTeX_CLASS: beamer, the document gets exported as
>> 'article'. Even worse, when I try to export the same document again
>> afterwards, I get a:
>> No definition for class `beamer' in `org-export-latex-classes'
>>
>> error.
>>
>> When I issue a 'reload-org-uncompiled' directly after starting emacs,
>> this behavior does not occur.
>>
>> In this case I get, as expected:
>>
>> \documentclass{beamer}
[ something deleted ]
>> \end{document}
>>
>>
>> any hints appreciated on how this behavior comes about.
>>
>> Cheers,
>>
>> Erik
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
> - Carsten
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: strange behavior for export
2010-05-01 12:46 ` Robert Klein
@ 2010-05-13 5:21 ` Carsten Dominik
0 siblings, 0 replies; 4+ messages in thread
From: Carsten Dominik @ 2010-05-13 5:21 UTC (permalink / raw)
To: Robert Klein; +Cc: emacs-orgmode
On May 1, 2010, at 2:46 PM, Robert Klein wrote:
> Eric,
>
> where in your .emacs is the (require 'org-install) command?
>
> In one of my setups I had it before the load-paths.
>
> I didn't notice, because of an older version of org-mode
> bundled with emacs; org-version reports the new version
> but that is not what my emacs used in exporting.
>
>
> Carsten,
>
> is there a reason why the manual says I should do the 'make'
> after it talks about load-path but before it tells me to put
> (require 'org-install) into the .emacs-file?
Only because is tries to present installation from activation.
Everybody has to activate, people who use the version delivered with
Emacs
do not have to install.
Does that answer your question?
- Carsten
>
> I should know better, but I still managed to confuse one of
> my .emacs-files when I started using org-mode.
>
> Best regards
> Robert
>
>
>
>
>
> On Sat, 01 May 2010 13:57:17 +0200, Carsten Dominik <carsten.dominik@gmail.com
> > wrote:
>
>> Hi Eric,
>>
>> I think this could mean two things. Most likely org is loading
>> some other version of org-latex.el. One way to find out is to run
>> M-x list-load-path-shadows.
>>
>> Another possibility is that you have somewhere a configuration
>> setting of org-export-latex-classes that is old and does not
>> contain the beamer class definition, and somehow that setting is
>> loaded before org-latex.el is loaded.
>>
>> HTH
>>
>> - Carsten
>>
>> On Apr 30, 2010, at 7:01 PM, Erik Butz wrote:
>>
>>> Hi all,
>>>
>>> I have the following problem:
>>>
>>> I have set up my emacs so as to use org-mode uncompiled from a
>>> local directory
>>>
>>> # from .emacs
>>> (setq load-path (cons "~/elisp/org-mode/lisp" load-path))
>>> (setq load-path (cons "~/elisp/org-mode/contrib/lisp" load-path))
>>>
>>>
>>> starting emacs22 or 23 and displaying M-x org-version I get:
>>>
>>> Org-mode version 6.35trans (release_6.35g.207.g7f085)
>>>
>>> so indeed the version from the local directory.
>>>
>>> when I take a document with the following preamble:
>>>
>>> #+LaTeX_CLASS: beamer
>>> #+TITLE: present.org
>>> #+AUTHOR: Erik
>>> #+EMAIL: erik@eddie
>>> #+DATE: 2010-04-08 Thu
>>> #+DESCRIPTION:
>>> #+KEYWORDS:
>>> #+LANGUAGE: en
>>> #+OPTIONS: H:3 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
>>> #+OPTIONS: TeX:t LaTeX:nil skip:nil d:nil todo:t pri:nil
>>> tags:not-in-toc
>>> #+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0
>>> path:http://orgmode.org/org-info.js
>>> #+EXPORT_SELECT_TAGS: export
>>> #+EXPORT_EXCLUDE_TAGS: noexport
>>> #+LINK_UP:
>>> #+LINK_HOME:
>>>
>>> and export this to latex I get the following:
>>>
>>>
>>> \documentclass[11pt,a4paper]{article}
>
> [ something deleted ]
>
>>>
>>> \end{document}
>>>
>>> so despite the #+LaTeX_CLASS: beamer, the document gets exported as
>>> 'article'. Even worse, when I try to export the same document again
>>> afterwards, I get a:
>>> No definition for class `beamer' in `org-export-latex-classes'
>>>
>>> error.
>>>
>>> When I issue a 'reload-org-uncompiled' directly after starting
>>> emacs,
>>> this behavior does not occur.
>>>
>>> In this case I get, as expected:
>>>
>>> \documentclass{beamer}
>
> [ something deleted ]
>
>>> \end{document}
>>>
>>>
>>> any hints appreciated on how this behavior comes about.
>>>
>>> Cheers,
>>>
>>> Erik
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>> - Carsten
>>
- Carsten
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-05-13 5:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-04-30 17:01 strange behavior for export Erik Butz
2010-05-01 11:57 ` Carsten Dominik
2010-05-01 12:46 ` Robert Klein
2010-05-13 5:21 ` Carsten Dominik
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).