* Literate programming in org
@ 2015-08-26 8:35 Max Linke
2015-08-26 10:36 ` Sebastien Vauban
2015-08-26 12:21 ` Ken Mankoff
0 siblings, 2 replies; 5+ messages in thread
From: Max Linke @ 2015-08-26 8:35 UTC (permalink / raw)
To: Org Mode
Hi
I'm currently trying to use org-modes literate programming capabilities
to write up a paper. So far it has been a joy to have the plotting code
and text in the same document. Thanks for all the work people here have
already put in to make this so easy.
I have run into a two small problems so far
* How can I use computed variables (string/int/float) in floating text?
I have for example calculated a autocorrelation time and now want to
use that calculated number in the text. The best solution I have
found so far is
#+name: print_acf_time
#+begin_src ipython :session :exports none
print(acf_time)
#+end_src
The autocorrelation time for the process is call_print_acf_time().
That is OK-ish but I have to write a special code cell for every
variable that I want to reference in my document. Is there another
method to export variables to be easily accessible in org-mode?
* reruning specific cells only one time after emacs was started
I have some cells that are long running and produce some variables
I later use for plotting or calculating related values. To avoid
recalculating I have added `cache: yes` to these cells. But they
are only run once across restarts of emacs or my interpreter session
in the background. When I start working again I would like to have a
way to rerun all code-cells independent of the fact if they are cached
or not. This would lead to a huge speed up in converting to latex for
me.
I appreciate any help with this.
best Max
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Literate programming in org
2015-08-26 8:35 Literate programming in org Max Linke
@ 2015-08-26 10:36 ` Sebastien Vauban
2015-08-26 19:40 ` Max Linke
2015-08-26 12:21 ` Ken Mankoff
1 sibling, 1 reply; 5+ messages in thread
From: Sebastien Vauban @ 2015-08-26 10:36 UTC (permalink / raw)
To: emacs-orgmode-mXXj517/zsQ
Hi,
Max Linke <max_linke-Mmb7MZpHnFY@public.gmane.org> writes:
> I'm currently trying to use org-modes literate programming capabilities
> to write up a paper. So far it has been a joy to have the plotting code
> and text in the same document. Thanks for all the work people here have
> already put in to make this so easy.
Can't add anything! ;-)
> I have run into a two small problems so far
>
> * How can I use computed variables (string/int/float) in floating text?
>
> I have for example calculated a autocorrelation time and now want to
> use that calculated number in the text. The best solution I have
> found so far is
>
> #+name: print_acf_time
> #+begin_src ipython :session :exports none
>
> print(acf_time)
> #+end_src
>
> The autocorrelation time for the process is call_print_acf_time().
> That is OK-ish but I have to write a special code cell for every
> variable that I want to reference in my document. Is there another
> method to export variables to be easily accessible in org-mode?
See:
- inline Babel calls: ... call_<NAME>(<ARGUMENTS>) ... and/or
- inline code blocks: src_<LANGUAGE>{<BODY>}.
> * reruning specific cells only one time after emacs was started
>
> I have some cells that are long running and produce some variables
> I later use for plotting or calculating related values. To avoid
> recalculating I have added `cache: yes` to these cells. But they
> are only run once across restarts of emacs or my interpreter session
> in the background. When I start working again I would like to have a
> way to rerun all code-cells independent of the fact if they are cached
> or not. This would lead to a huge speed up in converting to latex for
> me.
I don't understand why re-running code blocks which are cached is
a problem. Could you elaborate?
Best regards,
Seb
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Literate programming in org
2015-08-26 10:36 ` Sebastien Vauban
@ 2015-08-26 19:40 ` Max Linke
2015-08-26 20:07 ` Sebastien Vauban
0 siblings, 1 reply; 5+ messages in thread
From: Max Linke @ 2015-08-26 19:40 UTC (permalink / raw)
To: emacs-orgmode
On 08/26/2015 12:36 PM, Sebastien Vauban wrote:
> See:
>
> - inline Babel calls: ... call_<NAME>(<ARGUMENTS>) ... and/or
> - inline code blocks: src_<LANGUAGE>{<BODY>}.
Yes I'm currently using inline babel calls.
>
>> * reruning specific cells only one time after emacs was started
>>
>> I have some cells that are long running and produce some variables
>> I later use for plotting or calculating related values. To avoid
>> recalculating I have added `cache: yes` to these cells. But they
>> are only run once across restarts of emacs or my interpreter session
>> in the background. When I start working again I would like to have a
>> way to rerun all code-cells independent of the fact if they are cached
>> or not. This would lead to a huge speed up in converting to latex for
>> me.
>
> I don't understand why re-running code blocks which are cached is
> a problem. Could you elaborate?
I wanted a shortcut to rerun every code cell independent of cached
status. Looking again into the docs I found the short-cut
'C-u C-c C-v b'
This calls 'org-babel-execute-buffer'.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: Literate programming in org
2015-08-26 19:40 ` Max Linke
@ 2015-08-26 20:07 ` Sebastien Vauban
0 siblings, 0 replies; 5+ messages in thread
From: Sebastien Vauban @ 2015-08-26 20:07 UTC (permalink / raw)
To: emacs-orgmode-mXXj517/zsQ
Max Linke <max_linke-Mmb7MZpHnFY@public.gmane.org> writes:
> On 08/26/2015 12:36 PM, Sebastien Vauban wrote:
>> See:
>>
>> - inline Babel calls: ... call_<NAME>(<ARGUMENTS>) ... and/or
>> - inline code blocks: src_<LANGUAGE>{<BODY>}.
>
> Yes I'm currently using inline babel calls.
>
>>> * reruning specific cells only one time after emacs was started
>>>
>>> I have some cells that are long running and produce some variables
>>> I later use for plotting or calculating related values. To avoid
>>> recalculating I have added `cache: yes` to these cells. But they
>>> are only run once across restarts of emacs or my interpreter session
>>> in the background. When I start working again I would like to have a
>>> way to rerun all code-cells independent of the fact if they are cached
>>> or not. This would lead to a huge speed up in converting to latex for
>>> me.
>>
>> I don't understand why re-running code blocks which are cached is
>> a problem. Could you elaborate?
>
> I wanted a shortcut to rerun every code cell independent of cached
> status. Looking again into the docs I found the short-cut
>
> 'C-u C-c C-v b'
>
> This calls 'org-babel-execute-buffer'.
... to forcibly re-evaluate the blocks (even when marked ":cache"), yes.
OK, got it now!
Best regards,
Seb
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Literate programming in org
2015-08-26 8:35 Literate programming in org Max Linke
2015-08-26 10:36 ` Sebastien Vauban
@ 2015-08-26 12:21 ` Ken Mankoff
1 sibling, 0 replies; 5+ messages in thread
From: Ken Mankoff @ 2015-08-26 12:21 UTC (permalink / raw)
To: Max Linke; +Cc: Org Mode
Hi Max,
This is one bit of literate programming I haven't mastered myself yet. I generally have code blocks and print results, and then manually re-enter them in the paragraph below. I would like what you are looking for. The best solution I have, which I don't use often, is to use sessions and inline code.
On 2015-08-26 at 04:35, Max Linke <max_linke@gmx.de> wrote:
> * How can I use computed variables (string/int/float) in floating text?
>
> I have for example calculated a autocorrelation time and now want to
> use that calculated number in the text. The best solution I have
> found so far is
>
> #+name: print_acf_time
> #+begin_src ipython :session :exports none
> print(acf_time)
> #+end_src
>
> The autocorrelation time for the process is call_print_acf_time().
> That is OK-ish but I have to write a special code cell for every
> variable that I want to reference in my document. Is there another
> method to export variables to be easily accessible in org-mode?
For example, to insert the number three I could do the following, if a = 1 and b = 2, defined previously in session "foo": src_octave[:session foo]{a+b} {{{results(=3=)}}}
I've been thinking about other ways to achieve this... perhaps my code blocks update a table. That table might be included in the text for the reader. Then one code session reads it all in, so I have access to all results in one session and can use them in the text...
-k.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-08-26 20:07 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-26 8:35 Literate programming in org Max Linke
2015-08-26 10:36 ` Sebastien Vauban
2015-08-26 19:40 ` Max Linke
2015-08-26 20:07 ` Sebastien Vauban
2015-08-26 12:21 ` Ken Mankoff
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).