emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* info org section 3.1
@ 2012-09-07  8:07 Jude DaShiell
  2012-09-07  8:24 ` Charles Philip Chan
  0 siblings, 1 reply; 9+ messages in thread
From: Jude DaShiell @ 2012-09-07  8:07 UTC (permalink / raw)
  To: emacs-orgmode

Something is undocumented and broken.  Attempting to create the table 
documented in section 3.1 of the manual generates a beep and the message:
Symbol's value as variable is void: org-use-sub-superscripts
at the bottom of the screen and hitting tab just tells me I'm at the 
beginning of the buffer after that operation.  After I keyed in the 
example I tried c-c c-ret because writing a second line and putting |- on 
it caused the same problem to happen.


--------------------------------------------------------------------------- 
jude <jdashiel@shellworld.net> Adobe fiend for failing to Flash

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: info org section 3.1
  2012-09-07  8:07 info org section 3.1 Jude DaShiell
@ 2012-09-07  8:24 ` Charles Philip Chan
  2012-09-07  8:39   ` Jude DaShiell
  0 siblings, 1 reply; 9+ messages in thread
From: Charles Philip Chan @ 2012-09-07  8:24 UTC (permalink / raw)
  To: Org-mode

[-- Attachment #1: Type: text/plain, Size: 2263 bytes --]

Jude DaShiell <jdashiel@shellworld.net> writes:

Hi Jude:

> Something is undocumented and broken.  Attempting to create the table 
> documented in section 3.1 of the manual generates a beep and the message:
> Symbol's value as variable is void: org-use-sub-superscripts
> at the bottom of the screen and hitting tab just tells me I'm at the 
> beginning of the buffer after that operation.  After I keyed in the 
> example I tried c-c c-ret because writing a second line and putting |- on 
> it caused the same problem to happen.

Something is very wrong with your installation- the example works fine
here. It seems like your org.el is not loaded properly since
"org-use-sub-superscripts" is defined there:

,----[ Output of C-h v org-use-sub-superscripts]
| org-use-sub-superscripts is a variable defined in `org.el'.
| Its value is t
| 
| Documentation:
| Non-nil means interpret "_" and "^" for export.
| When this option is turned on, you can use TeX-like syntax for sub- and
| superscripts.  Several characters after "_" or "^" will be
| considered as a single item - so grouping with {} is normally not
| needed.  For example, the following things will be parsed as single
| sub- or superscripts.
| 
|  10^24   or   10^tau     several digits will be considered 1 item.
|  10^-12  or   10^-tau    a leading sign with digits or a word
|  x^2-y^3                 will be read as x^2 - y^3, because items are
| 			 terminated by almost any nonword/nondigit char.
|  x_{i^2} or   x^(2-i)    braces or parenthesis do grouping.
| 
| Still, ambiguity is possible - so when in doubt use {} to enclose the
| sub/superscript.  If you set this variable to the symbol `{}',
| the braces are *required* in order to trigger interpretations as
| sub/superscript.  This can be helpful in documents that need "_"
| frequently in plain text.
| 
| Not all export backends support this, but HTML does.
| 
| This option can also be set with the #+OPTIONS line, e.g. "^:nil".
| 
| You can customize this variable.
| 
| This variable was introduced, or its default value was changed, in
| version 24.1 of Emacs.
`----

Cheers,
Charles

-- 
"All language designers are arrogant.  Goes with the territory..."
(By Larry Wall)

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: info org section 3.1
  2012-09-07  8:24 ` Charles Philip Chan
@ 2012-09-07  8:39   ` Jude DaShiell
  2012-09-07  8:53     ` Charles Philip Chan
  2012-09-07 19:09     ` Achim Gratz
  0 siblings, 2 replies; 9+ messages in thread
From: Jude DaShiell @ 2012-09-07  8:39 UTC (permalink / raw)
  To: Charles Philip Chan; +Cc: Org-mode

This happens using gnu-emacs 23.41 and org 7.9.11 and that emacs is the 
current debian package version.  I used git clone to install and update 
org mode too.

On Fri, 7 Sep 2012, Charles Philip Chan wrote:

> Jude DaShiell <jdashiel@shellworld.net> writes:
> 
> Hi Jude:
> 
> > Something is undocumented and broken.  Attempting to create the table 
> > documented in section 3.1 of the manual generates a beep and the message:
> > Symbol's value as variable is void: org-use-sub-superscripts
> > at the bottom of the screen and hitting tab just tells me I'm at the 
> > beginning of the buffer after that operation.  After I keyed in the 
> > example I tried c-c c-ret because writing a second line and putting |- on 
> > it caused the same problem to happen.
> 
> Something is very wrong with your installation- the example works fine
> here. It seems like your org.el is not loaded properly since
> "org-use-sub-superscripts" is defined there:
> 
> ,----[ Output of C-h v org-use-sub-superscripts]
> | org-use-sub-superscripts is a variable defined in `org.el'.
> | Its value is t
> | 
> | Documentation:
> | Non-nil means interpret "_" and "^" for export.
> | When this option is turned on, you can use TeX-like syntax for sub- and
> | superscripts.  Several characters after "_" or "^" will be
> | considered as a single item - so grouping with {} is normally not
> | needed.  For example, the following things will be parsed as single
> | sub- or superscripts.
> | 
> |  10^24   or   10^tau     several digits will be considered 1 item.
> |  10^-12  or   10^-tau    a leading sign with digits or a word
> |  x^2-y^3                 will be read as x^2 - y^3, because items are
> | 			 terminated by almost any nonword/nondigit char.
> |  x_{i^2} or   x^(2-i)    braces or parenthesis do grouping.
> | 
> | Still, ambiguity is possible - so when in doubt use {} to enclose the
> | sub/superscript.  If you set this variable to the symbol `{}',
> | the braces are *required* in order to trigger interpretations as
> | sub/superscript.  This can be helpful in documents that need "_"
> | frequently in plain text.
> | 
> | Not all export backends support this, but HTML does.
> | 
> | This option can also be set with the #+OPTIONS line, e.g. "^:nil".
> | 
> | You can customize this variable.
> | 
> | This variable was introduced, or its default value was changed, in
> | version 24.1 of Emacs.
> `----
> 
> Cheers,
> Charles
> 
> 

---------------------------------------------------------------------------
jude <jdashiel@shellworld.net>
Adobe fiend for failing to Flash

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: info org section 3.1
  2012-09-07  8:39   ` Jude DaShiell
@ 2012-09-07  8:53     ` Charles Philip Chan
  2012-09-07  9:16       ` Jude DaShiell
  2012-09-07 19:09     ` Achim Gratz
  1 sibling, 1 reply; 9+ messages in thread
From: Charles Philip Chan @ 2012-09-07  8:53 UTC (permalink / raw)
  To: Org-mode

[-- Attachment #1: Type: text/plain, Size: 1586 bytes --]

Jude DaShiell <jdashiel@shellworld.net> writes:

Hi Jude:

> This happens using gnu-emacs 23.41 and org 7.9.11 and that emacs is
> the current debian package version.  I used git clone to install and
> update org mode too.

Maybe it is a mixed installation problem again. Have you tried the
suggestions here:

,----[ http://orgmode.org/worg/org-faq.html#mixed-install ]
| Is my Orgmode installation mixed?
| 
| Emacs is distributed with a version of Orgmode bundled with it. A common
| problem among users who install a newer version of Orgmode separately is
| a mixed install where Emacs loads some files from the bundled and the
| rest from the latest version. This can lead to unending troubles in the
| future. An easy first step to investigate this is to look at the output
| of M-x org-version.
| 
| Good 
|     Org-mode version 7.8.11 (release_7.8.11-448-g1737d3 @ /path/to/org-mode/lisp/)
| 
| Bad 
|     Org-mode version 6.33x (release_7.8.11.409.ga3778)
| 
| You should go through the output of list-load-path-shadows line-by-line
| to get hints to what in your configuration is causing the issue. Among
| the most common reasons is Orgmode gets loaded before the load-path
| variable is updated to include the installation directory of the latest
| Orgmode. To avoid issues like this, it is recommended that the load path
| is updated very early on in your init file.
`----

Cheers,
Charles

-- 
The nice thing about Windows is - It does not just crash, it displays a
dialog box and lets you press 'OK' first.
(Arno Schaefer's .sig)

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: info org section 3.1
  2012-09-07  8:53     ` Charles Philip Chan
@ 2012-09-07  9:16       ` Jude DaShiell
  2012-09-07  9:27         ` Ian Barton
  2012-09-07  9:36         ` Charles Philip Chan
  0 siblings, 2 replies; 9+ messages in thread
From: Jude DaShiell @ 2012-09-07  9:16 UTC (permalink / raw)
  To: Charles Philip Chan; +Cc: Org-mode

As an experiment, I replaced the org-mode from git with the debian 
org-mode package version 7.8.11 and tried creating the table again.  
This time, no errors.  Apparently something happened between 7.8.11 and 
7.9.11 to make this happen even with emacs 23.x systems.

On Fri, 7 Sep 2012, Charles Philip Chan wrote:

> Jude DaShiell <jdashiel@shellworld.net> writes:
> 
> Hi Jude:
> 
> > This happens using gnu-emacs 23.41 and org 7.9.11 and that emacs is
> > the current debian package version.  I used git clone to install and
> > update org mode too.
> 
> Maybe it is a mixed installation problem again. Have you tried the
> suggestions here:
> 
> ,----[ http://orgmode.org/worg/org-faq.html#mixed-install ]
> | Is my Orgmode installation mixed?
> | 
> | Emacs is distributed with a version of Orgmode bundled with it. A common
> | problem among users who install a newer version of Orgmode separately is
> | a mixed install where Emacs loads some files from the bundled and the
> | rest from the latest version. This can lead to unending troubles in the
> | future. An easy first step to investigate this is to look at the output
> | of M-x org-version.
> | 
> | Good 
> |     Org-mode version 7.8.11 (release_7.8.11-448-g1737d3 @ /path/to/org-mode/lisp/)
> | 
> | Bad 
> |     Org-mode version 6.33x (release_7.8.11.409.ga3778)
> | 
> | You should go through the output of list-load-path-shadows line-by-line
> | to get hints to what in your configuration is causing the issue. Among
> | the most common reasons is Orgmode gets loaded before the load-path
> | variable is updated to include the installation directory of the latest
> | Orgmode. To avoid issues like this, it is recommended that the load path
> | is updated very early on in your init file.
> `----
> 
> Cheers,
> Charles
> 
> 

---------------------------------------------------------------------------
jude <jdashiel@shellworld.net>
Adobe fiend for failing to Flash

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: info org section 3.1
  2012-09-07  9:16       ` Jude DaShiell
@ 2012-09-07  9:27         ` Ian Barton
  2012-09-07  9:36         ` Charles Philip Chan
  1 sibling, 0 replies; 9+ messages in thread
From: Ian Barton @ 2012-09-07  9:27 UTC (permalink / raw)
  To: emacs-orgmode

On 07/09/12 10:16, Jude DaShiell wrote:
> As an experiment, I replaced the org-mode from git with the debian
> org-mode package version 7.8.11 and tried creating the table again.
> This time, no errors.  Apparently something happened between 7.8.11 and
> 7.9.11 to make this happen even with emacs 23.x systems.
>
> On Fri, 7 Sep 2012, Charles Philip Chan wrote:
>
>> Jude DaShiell <jdashiel@shellworld.net> writes:
>>
>> Hi Jude:
>>
>>> This happens using gnu-emacs 23.41 and org 7.9.11 and that emacs is
>>> the current debian package version.  I used git clone to install and
>>> update org mode too.
>>
>> Maybe it is a mixed installation problem again. Have you tried the
>> suggestions here:
>>
>> ,----[ http://orgmode.org/worg/org-faq.html#mixed-install ]
>> | Is my Orgmode installation mixed?
>> |
>> | Emacs is distributed with a version of Orgmode bundled with it. A common
>> | problem among users who install a newer version of Orgmode separately is
>> | a mixed install where Emacs loads some files from the bundled and the
>> | rest from the latest version. This can lead to unending troubles in the
>> | future. An easy first step to investigate this is to look at the output
>> | of M-x org-version.
>> |
>> | Good
>> |     Org-mode version 7.8.11 (release_7.8.11-448-g1737d3 @ /path/to/org-mode/lisp/)
>> |
>> | Bad
>> |     Org-mode version 6.33x (release_7.8.11.409.ga3778)
>> |
>> | You should go through the output of list-load-path-shadows line-by-line
>> | to get hints to what in your configuration is causing the issue. Among
>> | the most common reasons is Orgmode gets loaded before the load-path
>> | variable is updated to include the installation directory of the latest
>> | Orgmode. To avoid issues like this, it is recommended that the load path
>> | is updated very early on in your init file.
>> `----
>>
>> Cheers,
>> Charles
>>
>>

I am using a recent git version 97c1b93e045e90ebb6d8a9d15a064d8ae717260b 
and the example works correctly here.

Ian.

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: info org section 3.1
  2012-09-07  9:16       ` Jude DaShiell
  2012-09-07  9:27         ` Ian Barton
@ 2012-09-07  9:36         ` Charles Philip Chan
  1 sibling, 0 replies; 9+ messages in thread
From: Charles Philip Chan @ 2012-09-07  9:36 UTC (permalink / raw)
  To: Org-mode

[-- Attachment #1: Type: text/plain, Size: 739 bytes --]

Jude DaShiell <jdashiel@shellworld.net> writes:

> As an experiment, I replaced the org-mode from git with the debian 
> org-mode package version 7.8.11 and tried creating the table again.  
> This time, no errors.  Apparently something happened between 7.8.11 and 
> 7.9.11 to make this happen even with emacs 23.x systems.

I am using the latest git version:

,----
| Org-mode version 7.9.1 (release_7.9.1-149-gd5fddb.dirty @ /usr/local/share/emacs/site-lisp/org/)
`----

and have no problems. You should really debug it by using the "mixed
installation" instructions in the FAQ.

Charles

-- 
I did this 'cause Linux gives me a woody.  It doesn't generate revenue.
(Dave '-ddt->` Taylor, announcing DOOM for Linux)

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: info org section 3.1
  2012-09-07  8:39   ` Jude DaShiell
  2012-09-07  8:53     ` Charles Philip Chan
@ 2012-09-07 19:09     ` Achim Gratz
  2012-09-08  0:07       ` Jude DaShiell
  1 sibling, 1 reply; 9+ messages in thread
From: Achim Gratz @ 2012-09-07 19:09 UTC (permalink / raw)
  To: emacs-orgmode

Jude DaShiell writes:
> This happens using gnu-emacs 23.41 and org 7.9.11 and that emacs is the 
> current debian package version.  I used git clone to install and update 
> org mode too.

… I sincerely hope that after cloning the orgmode repo you also did at
least a

make uncompiled

If not, please do it and let us know if it helped.


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

Samples for the Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#BlofeldSamplesExtra

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: info org section 3.1
  2012-09-07 19:09     ` Achim Gratz
@ 2012-09-08  0:07       ` Jude DaShiell
  0 siblings, 0 replies; 9+ messages in thread
From: Jude DaShiell @ 2012-09-08  0:07 UTC (permalink / raw)
  To: Achim Gratz; +Cc: emacs-orgmode

Okay, that make ./uncompiled did the trick, everything had its autoloads 
made again and now the example in 3.1 works with no problems.  Thanks.

On Fri, 7 Sep 2012, Achim Gratz wrote:

> Jude DaShiell writes:
> > This happens using gnu-emacs 23.41 and org 7.9.11 and that emacs is the 
> > current debian package version.  I used git clone to install and update 
> > org mode too.
> 
> ? I sincerely hope that after cloning the orgmode repo you also did at
> least a
> 
> make uncompiled
> 
> If not, please do it and let us know if it helped.
> 
> 
> Regards,
> Achim.
> 

---------------------------------------------------------------------------
jude <jdashiel@shellworld.net>
Adobe fiend for failing to Flash

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2012-09-08  0:07 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-07  8:07 info org section 3.1 Jude DaShiell
2012-09-07  8:24 ` Charles Philip Chan
2012-09-07  8:39   ` Jude DaShiell
2012-09-07  8:53     ` Charles Philip Chan
2012-09-07  9:16       ` Jude DaShiell
2012-09-07  9:27         ` Ian Barton
2012-09-07  9:36         ` Charles Philip Chan
2012-09-07 19:09     ` Achim Gratz
2012-09-08  0:07       ` Jude DaShiell

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).