emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* org-article setup
@ 2010-11-16 23:46 Mario E. Munich
  2010-11-17  0:24 ` Thomas S. Dye
                   ` (2 more replies)
  0 siblings, 3 replies; 12+ messages in thread
From: Mario E. Munich @ 2010-11-16 23:46 UTC (permalink / raw)
  To: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 1369 bytes --]

Dear all,

I am trying to use the org-article class created by Tomas Dye. As you might
guess, I am having some trouble and thus the email. I am using emacs 23.1.1
on Ubuntu 10.10 and org-mode verision TAG=7.3.

I have followed the instructions on worg:

http://orgmode.org/worg/org-contrib/babel/examples/article-class.php

up to the point in which I need to tangle the org document.

If I try to run the tangle command: M-x org-babel-tangle RET, I get the
following error: No org-bable-execute function for python!

I think that  the problem is that I do not have any setup for Babel in my
.emacs, so I went to look for the standard Babel setup in the org manual and
in worg.

- In the org Manual, I see chapter 14 devoted to Babel, but I do not see any
information on how to set it up in my .emacs (maybe it is enabled by default
since Babel is included in org, but I am not sure).

- In worg, there is a page for Babel:
http://orgmode.org/worg/org-contrib/babel/index.php and a corresponding
Introductory Tutorial. In this page, there is a section called Initial
Configuration in which there is a mention of a "five-step process", but the
corresponding list of steps only have 3 items.

I would appreciate if somebody could guide me towards a simple Babel
configuration that would help me tangle the org-article.org document.

Thanks a lot for all the help!

-Mario

[-- Attachment #1.2: Type: text/html, Size: 1668 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-16 23:46 org-article setup Mario E. Munich
@ 2010-11-17  0:24 ` Thomas S. Dye
  2010-11-17  5:11 ` John Hendy
  2010-11-17  7:18 ` Thomas S. Dye
  2 siblings, 0 replies; 12+ messages in thread
From: Thomas S. Dye @ 2010-11-17  0:24 UTC (permalink / raw)
  To: mariomu; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 2087 bytes --]

On Nov 16, 2010, at 1:46 PM, Mario E. Munich wrote:

> Dear all,
>
> I am trying to use the org-article class created by Tomas Dye. As  
> you might guess, I am having some trouble and thus the email. I am  
> using emacs 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>
> I have followed the instructions on worg:
>
> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>
> up to the point in which I need to tangle the org document.
>
> If I try to run the tangle command: M-x org-babel-tangle RET, I get  
> the following error: No org-bable-execute function for python!
>
> I think that  the problem is that I do not have any setup for Babel  
> in my .emacs, so I went to look for the standard Babel setup in the  
> org manual and in worg.
>
> - In the org Manual, I see chapter 14 devoted to Babel, but I do not  
> see any information on how to set it up in my .emacs (maybe it is  
> enabled by default since Babel is included in org, but I am not sure).
>
> - In worg, there is a page for Babel: http://orgmode.org/worg/org-contrib/babel/index.php 
>  and a corresponding Introductory Tutorial. In this page, there is a  
> section called Initial Configuration in which there is a mention of  
> a "five-step process", but the corresponding list of steps only have  
> 3 items.
>
> I would appreciate if somebody could guide me towards a simple Babel  
> configuration that would help me tangle the org-article.org document.
>
> Thanks a lot for all the help!
>
> -Mario

Aloha Mario,

Yes, it sounds like Babel isn't configured yet.  Here is what I use:

#+begin_src emacs-lisp :tangle yes
   (org-babel-do-load-languages
    'org-babel-load-languages
    '((R . t)
      (C . t)
      (ditaa . t)
      (dot . t)
      (emacs-lisp . t)
      (gnuplot . nil)
      (haskell . nil)
      (latex . t)
      (ocaml . nil)
      (org . t)
      (perl . t)
      (python . t)
      (ruby . t)
      (screen . nil)
      (sh . t)
      (sql . nil)
      (sqlite . t)))
#+end_src

You can adjust it to your needs by changing t and nil appropriately.

hth,
Tom

[-- Attachment #1.2: Type: text/html, Size: 3090 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-16 23:46 org-article setup Mario E. Munich
  2010-11-17  0:24 ` Thomas S. Dye
@ 2010-11-17  5:11 ` John Hendy
  2010-11-17  5:37   ` Thomas S. Dye
  2010-11-17  6:58   ` Thomas S. Dye
  2010-11-17  7:18 ` Thomas S. Dye
  2 siblings, 2 replies; 12+ messages in thread
From: John Hendy @ 2010-11-17  5:11 UTC (permalink / raw)
  To: mariomu; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 3476 bytes --]

On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich <mariomu@ieee.org> wrote:

> Dear all,
>
> I am trying to use the org-article class created by Tomas Dye. As you might
> guess, I am having some trouble and thus the email. I am using emacs 23.1.1
> on Ubuntu 10.10 and org-mode verision TAG=7.3.
>
> I have followed the instructions on worg:
>
> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>
> up to the point in which I need to tangle the org document.
>
> If I try to run the tangle command: M-x org-babel-tangle RET, I get the
> following error: No org-bable-execute function for python!
>
> I think that  the problem is that I do not have any setup for Babel in my
> .emacs, so I went to look for the standard Babel setup in the org manual and
> in worg.
>

Yup -- that's the error.


>
> - In the org Manual, I see chapter 14 devoted to Babel, but I do not see
> any information on how to set it up in my .emacs (maybe it is enabled by
> default since Babel is included in org, but I am not sure).
>
>
I concur and think that's weird. Even if it is on worg... perhaps the manual
should point there? There's a decent amount on babel in the manual so I
found it a bit odd that it didn't provide the setup syntax (like Thomas
did).


> - In worg, there is a page for Babel:
> http://orgmode.org/worg/org-contrib/babel/index.php and a corresponding
> Introductory Tutorial. In this page, there is a section called Initial
> Configuration in which there is a mention of a "five-step process", but the
> corresponding list of steps only have 3 items.
>

5 vs. 3 is kind of funny. Some of those aren't really even steps. For your
case it's as easy as opening up .emacs and adding this:

(org-babel-do-load-languages
 'org-babel-load-languages
 '((python . t)))

Though as Thomas listed, you can have more. It looks like he actually puts
his right into the org file itself with a #+src block.

As for the rest of the steps, I actually wasn't able to get it to compile. I
get a bunch of these errors:

,-----
| SyntaxError: invalid syntax
| File "<stdin>", line 17
|    print res
|            ^
| SyntaxError: invalid syntax
`-----

I think I get those to go away with "print (res)" instead of res by itself.
I think I've had that error before and it's a python version issue. I'd
suggest changing it if it's accepted by older versions since python is
perhaps moving that direction? I run Arch Linux and would guess that I may
be on a later version than a lot of distros.

I also get this at the end in the minibuffer at the very end:
,-----
| reference "gantttest" not found in this buffer
`-----

I get not class file.


>
> I would appreciate if somebody could guide me towards a simple Babel
> configuration that would help me tangle the org-article.org document.
>
>
It'd probably be a good idea for someone to clean up worg and the manual a
bit. I can do some of those things -- Thomas, perhaps you want to handle the
org-article specific things if there are some compilation issues on my end
that find fixes and I can make worg a little clearer about babel setup? Not
sure who oversees the manual, but a redirect at the least to worg for .emacs
configuration would be helpful.


John


> Thanks a lot for all the help!
>
> -Mario
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>

[-- Attachment #1.2: Type: text/html, Size: 5267 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-17  5:11 ` John Hendy
@ 2010-11-17  5:37   ` Thomas S. Dye
  2010-11-17  6:58   ` Thomas S. Dye
  1 sibling, 0 replies; 12+ messages in thread
From: Thomas S. Dye @ 2010-11-17  5:37 UTC (permalink / raw)
  To: John Hendy; +Cc: mariomu, emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 4559 bytes --]

Hi John,

Apologies for having stupidly done some hacky development work on the  
master branch of org-article.  You must have pulled this weekend when  
things were *really* unsettled.  The errors you're getting now are  
ones I introduced but have since fixed.

The python dependency is from a work in progress that will eventually  
(and hopefully) support the minted package for source code markup and  
typesetting.   This is the kind of thing that should live in a git  
branch before it ends up throwing errors around your workspace.  So,  
more apologies.

I'll work at getting all the development stuff into a branch so master  
is stable again.

All the best,
Tom



On Nov 16, 2010, at 7:11 PM, John Hendy wrote:

> On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich <mariomu@ieee.org>  
> wrote:
> Dear all,
>
> I am trying to use the org-article class created by Tomas Dye. As  
> you might guess, I am having some trouble and thus the email. I am  
> using emacs 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>
> I have followed the instructions on worg:
>
> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>
> up to the point in which I need to tangle the org document.
>
> If I try to run the tangle command: M-x org-babel-tangle RET, I get  
> the following error: No org-bable-execute function for python!
>
> I think that  the problem is that I do not have any setup for Babel  
> in my .emacs, so I went to look for the standard Babel setup in the  
> org manual and in worg.
>
> Yup -- that's the error.
>
>
> - In the org Manual, I see chapter 14 devoted to Babel, but I do not  
> see any information on how to set it up in my .emacs (maybe it is  
> enabled by default since Babel is included in org, but I am not sure).
>
>
> I concur and think that's weird. Even if it is on worg... perhaps  
> the manual should point there? There's a decent amount on babel in  
> the manual so I found it a bit odd that it didn't provide the setup  
> syntax (like Thomas did).
>
> - In worg, there is a page for Babel: http://orgmode.org/worg/org-contrib/babel/index.php 
>  and a corresponding Introductory Tutorial. In this page, there is a  
> section called Initial Configuration in which there is a mention of  
> a "five-step process", but the corresponding list of steps only have  
> 3 items.
>
> 5 vs. 3 is kind of funny. Some of those aren't really even steps.  
> For your case it's as easy as opening up .emacs and adding this:
>
> (org-babel-do-load-languages
>  'org-babel-load-languages
>  '((python . t)))
>
> Though as Thomas listed, you can have more. It looks like he  
> actually puts his right into the org file itself with a #+src block.
>
> As for the rest of the steps, I actually wasn't able to get it to  
> compile. I get a bunch of these errors:
>
> ,-----
> | SyntaxError: invalid syntax
> | File "<stdin>", line 17
> |    print res
> |            ^
> | SyntaxError: invalid syntax
> `-----
>
> I think I get those to go away with "print (res)" instead of res by  
> itself. I think I've had that error before and it's a python version  
> issue. I'd suggest changing it if it's accepted by older versions  
> since python is perhaps moving that direction? I run Arch Linux and  
> would guess that I may be on a later version than a lot of distros.
>
> I also get this at the end in the minibuffer at the very end:
> ,-----
> | reference "gantttest" not found in this buffer
> `-----
>
> I get not class file.
>
>
> I would appreciate if somebody could guide me towards a simple Babel  
> configuration that would help me tangle the org-article.org document.
>
>
> It'd probably be a good idea for someone to clean up worg and the  
> manual a bit. I can do some of those things -- Thomas, perhaps you  
> want to handle the org-article specific things if there are some  
> compilation issues on my end that find fixes and I can make worg a  
> little clearer about babel setup? Not sure who oversees the manual,  
> but a redirect at the least to worg for .emacs configuration would  
> be helpful.
>
>
> John
>
> Thanks a lot for all the help!
>
> -Mario
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode


[-- Attachment #1.2: Type: text/html, Size: 6594 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-17  5:11 ` John Hendy
  2010-11-17  5:37   ` Thomas S. Dye
@ 2010-11-17  6:58   ` Thomas S. Dye
  2010-11-17 21:07     ` John Hendy
  1 sibling, 1 reply; 12+ messages in thread
From: Thomas S. Dye @ 2010-11-17  6:58 UTC (permalink / raw)
  To: John Hendy; +Cc: mariomu, emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 4055 bytes --]

Aloha John and Mario,

I've moved my buggy development efforts to a branch and you can now  
pull a stable version of Org-article if you're so inclined.

All the best,
Tom

On Nov 16, 2010, at 7:11 PM, John Hendy wrote:

> On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich <mariomu@ieee.org>  
> wrote:
> Dear all,
>
> I am trying to use the org-article class created by Tomas Dye. As  
> you might guess, I am having some trouble and thus the email. I am  
> using emacs 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>
> I have followed the instructions on worg:
>
> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>
> up to the point in which I need to tangle the org document.
>
> If I try to run the tangle command: M-x org-babel-tangle RET, I get  
> the following error: No org-bable-execute function for python!
>
> I think that  the problem is that I do not have any setup for Babel  
> in my .emacs, so I went to look for the standard Babel setup in the  
> org manual and in worg.
>
> Yup -- that's the error.
>
>
> - In the org Manual, I see chapter 14 devoted to Babel, but I do not  
> see any information on how to set it up in my .emacs (maybe it is  
> enabled by default since Babel is included in org, but I am not sure).
>
>
> I concur and think that's weird. Even if it is on worg... perhaps  
> the manual should point there? There's a decent amount on babel in  
> the manual so I found it a bit odd that it didn't provide the setup  
> syntax (like Thomas did).
>
> - In worg, there is a page for Babel: http://orgmode.org/worg/org-contrib/babel/index.php 
>  and a corresponding Introductory Tutorial. In this page, there is a  
> section called Initial Configuration in which there is a mention of  
> a "five-step process", but the corresponding list of steps only have  
> 3 items.
>
> 5 vs. 3 is kind of funny. Some of those aren't really even steps.  
> For your case it's as easy as opening up .emacs and adding this:
>
> (org-babel-do-load-languages
>  'org-babel-load-languages
>  '((python . t)))
>
> Though as Thomas listed, you can have more. It looks like he  
> actually puts his right into the org file itself with a #+src block.
>
> As for the rest of the steps, I actually wasn't able to get it to  
> compile. I get a bunch of these errors:
>
> ,-----
> | SyntaxError: invalid syntax
> | File "<stdin>", line 17
> |    print res
> |            ^
> | SyntaxError: invalid syntax
> `-----
>
> I think I get those to go away with "print (res)" instead of res by  
> itself. I think I've had that error before and it's a python version  
> issue. I'd suggest changing it if it's accepted by older versions  
> since python is perhaps moving that direction? I run Arch Linux and  
> would guess that I may be on a later version than a lot of distros.
>
> I also get this at the end in the minibuffer at the very end:
> ,-----
> | reference "gantttest" not found in this buffer
> `-----
>
> I get not class file.
>
>
> I would appreciate if somebody could guide me towards a simple Babel  
> configuration that would help me tangle the org-article.org document.
>
>
> It'd probably be a good idea for someone to clean up worg and the  
> manual a bit. I can do some of those things -- Thomas, perhaps you  
> want to handle the org-article specific things if there are some  
> compilation issues on my end that find fixes and I can make worg a  
> little clearer about babel setup? Not sure who oversees the manual,  
> but a redirect at the least to worg for .emacs configuration would  
> be helpful.
>
>
> John
>
> Thanks a lot for all the help!
>
> -Mario
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode


[-- Attachment #1.2: Type: text/html, Size: 6008 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-16 23:46 org-article setup Mario E. Munich
  2010-11-17  0:24 ` Thomas S. Dye
  2010-11-17  5:11 ` John Hendy
@ 2010-11-17  7:18 ` Thomas S. Dye
  2 siblings, 0 replies; 12+ messages in thread
From: Thomas S. Dye @ 2010-11-17  7:18 UTC (permalink / raw)
  To: mariomu; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 496 bytes --]

Aloha Mario,

Thanks for pointing this out.  I've removed reference to the old five- 
step process.

All the best,
Tom

On Nov 16, 2010, at 1:46 PM, Mario E. Munich wrote:

> - In worg, there is a page for Babel: http://orgmode.org/worg/org-contrib/babel/index.php 
>  and a corresponding Introductory Tutorial. In this page, there is a  
> section called Initial Configuration in which there is a mention of  
> a "five-step process", but the corresponding list of steps only have  
> 3 items.


[-- Attachment #1.2: Type: text/html, Size: 1495 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-17  6:58   ` Thomas S. Dye
@ 2010-11-17 21:07     ` John Hendy
  2010-11-17 21:40       ` Thomas S. Dye
  0 siblings, 1 reply; 12+ messages in thread
From: John Hendy @ 2010-11-17 21:07 UTC (permalink / raw)
  To: Thomas S. Dye; +Cc: mariomu, emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 4571 bytes --]

Thanks, Tom.

I'm getting an error, though. I tried both settings from Section 1.2 (
http://orgmode.org/worg/org-contrib/babel/examples/article-class.php#sec-1_2)
and get this error when I start emacs:

,-----
| Symbol's value as variable is void: org-export-latex-classes
`-----

I just did a fresh git pull, make clean, make && make install just to be
sure it wasn't just my version.

What am I goofing up?


Thanks,
John

On Wed, Nov 17, 2010 at 12:58 AM, Thomas S. Dye <tsd@tsdye.com> wrote:

> Aloha John and Mario,
>
> I've moved my buggy development efforts to a branch and you can now pull a
> stable version of Org-article if you're so inclined.
>
> All the best,
> Tom
>
> On Nov 16, 2010, at 7:11 PM, John Hendy wrote:
>
> On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich <mariomu@ieee.org> wrote:
>
>> Dear all,
>>
>> I am trying to use the org-article class created by Tomas Dye. As you
>> might guess, I am having some trouble and thus the email. I am using emacs
>> 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>>
>> I have followed the instructions on worg:
>>
>> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>>
>> up to the point in which I need to tangle the org document.
>>
>> If I try to run the tangle command: M-x org-babel-tangle RET, I get the
>> following error: No org-bable-execute function for python!
>>
>> I think that  the problem is that I do not have any setup for Babel in my
>> .emacs, so I went to look for the standard Babel setup in the org manual and
>> in worg.
>>
>
> Yup -- that's the error.
>
>
>>
>> - In the org Manual, I see chapter 14 devoted to Babel, but I do not see
>> any information on how to set it up in my .emacs (maybe it is enabled by
>> default since Babel is included in org, but I am not sure).
>>
>>
> I concur and think that's weird. Even if it is on worg... perhaps the
> manual should point there? There's a decent amount on babel in the manual so
> I found it a bit odd that it didn't provide the setup syntax (like Thomas
> did).
>
>
>> - In worg, there is a page for Babel:
>> http://orgmode.org/worg/org-contrib/babel/index.php and a corresponding
>> Introductory Tutorial. In this page, there is a section called Initial
>> Configuration in which there is a mention of a "five-step process", but the
>> corresponding list of steps only have 3 items.
>>
>
> 5 vs. 3 is kind of funny. Some of those aren't really even steps. For your
> case it's as easy as opening up .emacs and adding this:
>
> (org-babel-do-load-languages
>  'org-babel-load-languages
>  '((python . t)))
>
> Though as Thomas listed, you can have more. It looks like he actually puts
> his right into the org file itself with a #+src block.
>
> As for the rest of the steps, I actually wasn't able to get it to compile.
> I get a bunch of these errors:
>
> ,-----
> | SyntaxError: invalid syntax
> | File "<stdin>", line 17
> |    print res
> |            ^
> | SyntaxError: invalid syntax
> `-----
>
> I think I get those to go away with "print (res)" instead of res by itself.
> I think I've had that error before and it's a python version issue. I'd
> suggest changing it if it's accepted by older versions since python is
> perhaps moving that direction? I run Arch Linux and would guess that I may
> be on a later version than a lot of distros.
>
> I also get this at the end in the minibuffer at the very end:
> ,-----
> | reference "gantttest" not found in this buffer
> `-----
>
> I get not class file.
>
>
>>
>> I would appreciate if somebody could guide me towards a simple Babel
>> configuration that would help me tangle the org-article.org document.
>>
>>
> It'd probably be a good idea for someone to clean up worg and the manual a
> bit. I can do some of those things -- Thomas, perhaps you want to handle the
> org-article specific things if there are some compilation issues on my end
> that find fixes and I can make worg a little clearer about babel setup? Not
> sure who oversees the manual, but a redirect at the least to worg for .emacs
> configuration would be helpful.
>
>
> John
>
>
>> Thanks a lot for all the help!
>>
>> -Mario
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
>

[-- Attachment #1.2: Type: text/html, Size: 7138 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-17 21:07     ` John Hendy
@ 2010-11-17 21:40       ` Thomas S. Dye
       [not found]         ` <AANLkTinOZrEUS4RxsMKUW7Jy+4s+Tjh9i+iANiUBpvsz@mail.gmail.com>
  2010-11-22  8:09         ` Mario E. Munich
  0 siblings, 2 replies; 12+ messages in thread
From: Thomas S. Dye @ 2010-11-17 21:40 UTC (permalink / raw)
  To: John Hendy; +Cc: mariomu, emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 4939 bytes --]

Hi John,

Perhaps this is missing:

   (require 'org-latex)

Let me know if that fixes your problem and I'll add it to the  
instructions.

All the best,
Tom

On Nov 17, 2010, at 11:07 AM, John Hendy wrote:

> Thanks, Tom.
>
> I'm getting an error, though. I tried both settings from Section 1.2  
> (http://orgmode.org/worg/org-contrib/babel/examples/article-class.php#sec-1_2 
> ) and get this error when I start emacs:
>
> ,-----
> | Symbol's value as variable is void: org-export-latex-classes
> `-----
>
> I just did a fresh git pull, make clean, make && make install just  
> to be sure it wasn't just my version.
>
> What am I goofing up?
>
>
> Thanks,
> John
>
> On Wed, Nov 17, 2010 at 12:58 AM, Thomas S. Dye <tsd@tsdye.com> wrote:
> Aloha John and Mario,
>
> I've moved my buggy development efforts to a branch and you can now  
> pull a stable version of Org-article if you're so inclined.
>
> All the best,
> Tom
>
> On Nov 16, 2010, at 7:11 PM, John Hendy wrote:
>
>> On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich <mariomu@ieee.org>  
>> wrote:
>> Dear all,
>>
>> I am trying to use the org-article class created by Tomas Dye. As  
>> you might guess, I am having some trouble and thus the email. I am  
>> using emacs 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>>
>> I have followed the instructions on worg:
>>
>> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>>
>> up to the point in which I need to tangle the org document.
>>
>> If I try to run the tangle command: M-x org-babel-tangle RET, I get  
>> the following error: No org-bable-execute function for python!
>>
>> I think that  the problem is that I do not have any setup for Babel  
>> in my .emacs, so I went to look for the standard Babel setup in the  
>> org manual and in worg.
>>
>> Yup -- that's the error.
>>
>>
>> - In the org Manual, I see chapter 14 devoted to Babel, but I do  
>> not see any information on how to set it up in my .emacs (maybe it  
>> is enabled by default since Babel is included in org, but I am not  
>> sure).
>>
>>
>> I concur and think that's weird. Even if it is on worg... perhaps  
>> the manual should point there? There's a decent amount on babel in  
>> the manual so I found it a bit odd that it didn't provide the setup  
>> syntax (like Thomas did).
>>
>> - In worg, there is a page for Babel: http://orgmode.org/worg/org-contrib/babel/index.php 
>>  and a corresponding Introductory Tutorial. In this page, there is  
>> a section called Initial Configuration in which there is a mention  
>> of a "five-step process", but the corresponding list of steps only  
>> have 3 items.
>>
>> 5 vs. 3 is kind of funny. Some of those aren't really even steps.  
>> For your case it's as easy as opening up .emacs and adding this:
>>
>> (org-babel-do-load-languages
>>  'org-babel-load-languages
>>  '((python . t)))
>>
>> Though as Thomas listed, you can have more. It looks like he  
>> actually puts his right into the org file itself with a #+src block.
>>
>> As for the rest of the steps, I actually wasn't able to get it to  
>> compile. I get a bunch of these errors:
>>
>> ,-----
>> | SyntaxError: invalid syntax
>> | File "<stdin>", line 17
>> |    print res
>> |            ^
>> | SyntaxError: invalid syntax
>> `-----
>>
>> I think I get those to go away with "print (res)" instead of res by  
>> itself. I think I've had that error before and it's a python  
>> version issue. I'd suggest changing it if it's accepted by older  
>> versions since python is perhaps moving that direction? I run Arch  
>> Linux and would guess that I may be on a later version than a lot  
>> of distros.
>>
>> I also get this at the end in the minibuffer at the very end:
>> ,-----
>> | reference "gantttest" not found in this buffer
>> `-----
>>
>> I get not class file.
>>
>>
>> I would appreciate if somebody could guide me towards a simple  
>> Babel configuration that would help me tangle the org-article.org  
>> document.
>>
>>
>> It'd probably be a good idea for someone to clean up worg and the  
>> manual a bit. I can do some of those things -- Thomas, perhaps you  
>> want to handle the org-article specific things if there are some  
>> compilation issues on my end that find fixes and I can make worg a  
>> little clearer about babel setup? Not sure who oversees the manual,  
>> but a redirect at the least to worg for .emacs configuration would  
>> be helpful.
>>
>>
>> John
>>
>> Thanks a lot for all the help!
>>
>> -Mario
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>


[-- Attachment #1.2: Type: text/html, Size: 7646 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
       [not found]         ` <AANLkTinOZrEUS4RxsMKUW7Jy+4s+Tjh9i+iANiUBpvsz@mail.gmail.com>
@ 2010-11-17 22:47           ` Thomas S. Dye
  2010-11-17 23:07             ` John Hendy
  0 siblings, 1 reply; 12+ messages in thread
From: Thomas S. Dye @ 2010-11-17 22:47 UTC (permalink / raw)
  To: John Hendy; +Cc: Emacs Org mode mailing list


[-- Attachment #1.1: Type: text/plain, Size: 5551 bytes --]

Aloha John,

Thanks for helping with this.  It is fixed now, though the change on  
Worg might not appear for some minutes.

All the best,
Tom

On Nov 17, 2010, at 12:07 PM, John Hendy wrote:

> That did it. Thanks. I'll have to play around with it now. I  
> actually am not sure what I'll use this for! Just tried to help  
> Mario figure things out :)
>
>
> John
>
> On Wed, Nov 17, 2010 at 3:40 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> Hi John,
>
> Perhaps this is missing:
>
>   (require 'org-latex)
>
> Let me know if that fixes your problem and I'll add it to the  
> instructions.
>
> All the best,
> Tom
>
> On Nov 17, 2010, at 11:07 AM, John Hendy wrote:
>
>> Thanks, Tom.
>>
>> I'm getting an error, though. I tried both settings from Section  
>> 1.2 (http://orgmode.org/worg/org-contrib/babel/examples/article-class.php#sec-1_2 
>> ) and get this error when I start emacs:
>>
>> ,-----
>> | Symbol's value as variable is void: org-export-latex-classes
>> `-----
>>
>> I just did a fresh git pull, make clean, make && make install just  
>> to be sure it wasn't just my version.
>>
>> What am I goofing up?
>>
>>
>> Thanks,
>> John
>>
>> On Wed, Nov 17, 2010 at 12:58 AM, Thomas S. Dye <tsd@tsdye.com>  
>> wrote:
>> Aloha John and Mario,
>>
>> I've moved my buggy development efforts to a branch and you can now  
>> pull a stable version of Org-article if you're so inclined.
>>
>> All the best,
>> Tom
>>
>> On Nov 16, 2010, at 7:11 PM, John Hendy wrote:
>>
>>> On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich  
>>> <mariomu@ieee.org> wrote:
>>> Dear all,
>>>
>>> I am trying to use the org-article class created by Tomas Dye. As  
>>> you might guess, I am having some trouble and thus the email. I am  
>>> using emacs 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>>>
>>> I have followed the instructions on worg:
>>>
>>> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>>>
>>> up to the point in which I need to tangle the org document.
>>>
>>> If I try to run the tangle command: M-x org-babel-tangle RET, I  
>>> get the following error: No org-bable-execute function for python!
>>>
>>> I think that  the problem is that I do not have any setup for  
>>> Babel in my .emacs, so I went to look for the standard Babel setup  
>>> in the org manual and in worg.
>>>
>>> Yup -- that's the error.
>>>
>>>
>>> - In the org Manual, I see chapter 14 devoted to Babel, but I do  
>>> not see any information on how to set it up in my .emacs (maybe it  
>>> is enabled by default since Babel is included in org, but I am not  
>>> sure).
>>>
>>>
>>> I concur and think that's weird. Even if it is on worg... perhaps  
>>> the manual should point there? There's a decent amount on babel in  
>>> the manual so I found it a bit odd that it didn't provide the  
>>> setup syntax (like Thomas did).
>>>
>>> - In worg, there is a page for Babel: http://orgmode.org/worg/org-contrib/babel/index.php 
>>>  and a corresponding Introductory Tutorial. In this page, there is  
>>> a section called Initial Configuration in which there is a mention  
>>> of a "five-step process", but the corresponding list of steps only  
>>> have 3 items.
>>>
>>> 5 vs. 3 is kind of funny. Some of those aren't really even steps.  
>>> For your case it's as easy as opening up .emacs and adding this:
>>>
>>> (org-babel-do-load-languages
>>>  'org-babel-load-languages
>>>  '((python . t)))
>>>
>>> Though as Thomas listed, you can have more. It looks like he  
>>> actually puts his right into the org file itself with a #+src block.
>>>
>>> As for the rest of the steps, I actually wasn't able to get it to  
>>> compile. I get a bunch of these errors:
>>>
>>> ,-----
>>> | SyntaxError: invalid syntax
>>> | File "<stdin>", line 17
>>> |    print res
>>> |            ^
>>> | SyntaxError: invalid syntax
>>> `-----
>>>
>>> I think I get those to go away with "print (res)" instead of res  
>>> by itself. I think I've had that error before and it's a python  
>>> version issue. I'd suggest changing it if it's accepted by older  
>>> versions since python is perhaps moving that direction? I run Arch  
>>> Linux and would guess that I may be on a later version than a lot  
>>> of distros.
>>>
>>> I also get this at the end in the minibuffer at the very end:
>>> ,-----
>>> | reference "gantttest" not found in this buffer
>>> `-----
>>>
>>> I get not class file.
>>>
>>>
>>> I would appreciate if somebody could guide me towards a simple  
>>> Babel configuration that would help me tangle the org-article.org  
>>> document.
>>>
>>>
>>> It'd probably be a good idea for someone to clean up worg and the  
>>> manual a bit. I can do some of those things -- Thomas, perhaps you  
>>> want to handle the org-article specific things if there are some  
>>> compilation issues on my end that find fixes and I can make worg a  
>>> little clearer about babel setup? Not sure who oversees the  
>>> manual, but a redirect at the least to worg for .emacs  
>>> configuration would be helpful.
>>>
>>>
>>> John
>>>
>>> Thanks a lot for all the help!
>>>
>>> -Mario
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>>
>
>


[-- Attachment #1.2: Type: text/html, Size: 8489 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-17 22:47           ` Thomas S. Dye
@ 2010-11-17 23:07             ` John Hendy
  0 siblings, 0 replies; 12+ messages in thread
From: John Hendy @ 2010-11-17 23:07 UTC (permalink / raw)
  To: Thomas S. Dye; +Cc: Emacs Org mode mailing list


[-- Attachment #1.1: Type: text/plain, Size: 5699 bytes --]

No problem and thanks for your swift work!

John

On Wed, Nov 17, 2010 at 4:47 PM, Thomas S. Dye <tsd@tsdye.com> wrote:

> Aloha John,
>
> Thanks for helping with this.  It is fixed now, though the change on Worg
> might not appear for some minutes.
>
> All the best,
> Tom
>
> On Nov 17, 2010, at 12:07 PM, John Hendy wrote:
>
> That did it. Thanks. I'll have to play around with it now. I actually am
> not sure what I'll use this for! Just tried to help Mario figure things out
> :)
>
>
> John
>
> On Wed, Nov 17, 2010 at 3:40 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>
>> Hi John,
>>
>> Perhaps this is missing:
>>
>>   (require 'org-latex)
>>
>> Let me know if that fixes your problem and I'll add it to the
>> instructions.
>>
>> All the best,
>> Tom
>>
>> On Nov 17, 2010, at 11:07 AM, John Hendy wrote:
>>
>> Thanks, Tom.
>>
>> I'm getting an error, though. I tried both settings from Section 1.2 (
>> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php#sec-1_2)
>> and get this error when I start emacs:
>>
>> ,-----
>> | Symbol's value as variable is void: org-export-latex-classes
>> `-----
>>
>> I just did a fresh git pull, make clean, make && make install just to be
>> sure it wasn't just my version.
>>
>> What am I goofing up?
>>
>>
>> Thanks,
>> John
>>
>> On Wed, Nov 17, 2010 at 12:58 AM, Thomas S. Dye <tsd@tsdye.com> wrote:
>>
>>> Aloha John and Mario,
>>>
>>> I've moved my buggy development efforts to a branch and you can now pull
>>> a stable version of Org-article if you're so inclined.
>>>
>>> All the best,
>>> Tom
>>>
>>> On Nov 16, 2010, at 7:11 PM, John Hendy wrote:
>>>
>>> On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich <mariomu@ieee.org>wrote:
>>>
>>>> Dear all,
>>>>
>>>> I am trying to use the org-article class created by Tomas Dye. As you
>>>> might guess, I am having some trouble and thus the email. I am using emacs
>>>> 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>>>>
>>>> I have followed the instructions on worg:
>>>>
>>>> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>>>>
>>>> up to the point in which I need to tangle the org document.
>>>>
>>>> If I try to run the tangle command: M-x org-babel-tangle RET, I get the
>>>> following error: No org-bable-execute function for python!
>>>>
>>>> I think that  the problem is that I do not have any setup for Babel in
>>>> my .emacs, so I went to look for the standard Babel setup in the org manual
>>>> and in worg.
>>>>
>>>
>>> Yup -- that's the error.
>>>
>>>
>>>>
>>>> - In the org Manual, I see chapter 14 devoted to Babel, but I do not see
>>>> any information on how to set it up in my .emacs (maybe it is enabled by
>>>> default since Babel is included in org, but I am not sure).
>>>>
>>>>
>>> I concur and think that's weird. Even if it is on worg... perhaps the
>>> manual should point there? There's a decent amount on babel in the manual so
>>> I found it a bit odd that it didn't provide the setup syntax (like Thomas
>>> did).
>>>
>>>
>>>> - In worg, there is a page for Babel:
>>>> http://orgmode.org/worg/org-contrib/babel/index.php and a corresponding
>>>> Introductory Tutorial. In this page, there is a section called Initial
>>>> Configuration in which there is a mention of a "five-step process", but the
>>>> corresponding list of steps only have 3 items.
>>>>
>>>
>>> 5 vs. 3 is kind of funny. Some of those aren't really even steps. For
>>> your case it's as easy as opening up .emacs and adding this:
>>>
>>> (org-babel-do-load-languages
>>>  'org-babel-load-languages
>>>  '((python . t)))
>>>
>>> Though as Thomas listed, you can have more. It looks like he actually
>>> puts his right into the org file itself with a #+src block.
>>>
>>> As for the rest of the steps, I actually wasn't able to get it to
>>> compile. I get a bunch of these errors:
>>>
>>> ,-----
>>> | SyntaxError: invalid syntax
>>> | File "<stdin>", line 17
>>> |    print res
>>> |            ^
>>> | SyntaxError: invalid syntax
>>> `-----
>>>
>>> I think I get those to go away with "print (res)" instead of res by
>>> itself. I think I've had that error before and it's a python version issue.
>>> I'd suggest changing it if it's accepted by older versions since python is
>>> perhaps moving that direction? I run Arch Linux and would guess that I may
>>> be on a later version than a lot of distros.
>>>
>>> I also get this at the end in the minibuffer at the very end:
>>> ,-----
>>> | reference "gantttest" not found in this buffer
>>> `-----
>>>
>>> I get not class file.
>>>
>>>
>>>>
>>>> I would appreciate if somebody could guide me towards a simple Babel
>>>> configuration that would help me tangle the org-article.org document.
>>>>
>>>>
>>> It'd probably be a good idea for someone to clean up worg and the manual
>>> a bit. I can do some of those things -- Thomas, perhaps you want to handle
>>> the org-article specific things if there are some compilation issues on my
>>> end that find fixes and I can make worg a little clearer about babel setup?
>>> Not sure who oversees the manual, but a redirect at the least to worg for
>>> .emacs configuration would be helpful.
>>>
>>>
>>> John
>>>
>>>
>>>> Thanks a lot for all the help!
>>>>
>>>> -Mario
>>>>
>>>>
>>>> _______________________________________________
>>>> Emacs-orgmode mailing list
>>>> Please use `Reply All' to send replies to the list.
>>>> Emacs-orgmode@gnu.org
>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>>
>>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>>>
>>>
>>
>>
>
>

[-- Attachment #1.2: Type: text/html, Size: 8883 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-17 21:40       ` Thomas S. Dye
       [not found]         ` <AANLkTinOZrEUS4RxsMKUW7Jy+4s+Tjh9i+iANiUBpvsz@mail.gmail.com>
@ 2010-11-22  8:09         ` Mario E. Munich
  2010-11-22 17:04           ` Thomas S. Dye
  1 sibling, 1 reply; 12+ messages in thread
From: Mario E. Munich @ 2010-11-22  8:09 UTC (permalink / raw)
  To: Thomas S. Dye; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 5170 bytes --]

Dear Thomas and John,

thanks a lot for the prompt reply! I just had time to follow the
instructions and it works!!!

Best regards,

-Mario

On Wed, Nov 17, 2010 at 1:40 PM, Thomas S. Dye <tsd@tsdye.com> wrote:

> Hi John,
>
> Perhaps this is missing:
>
>   (require 'org-latex)
>
> Let me know if that fixes your problem and I'll add it to the instructions.
>
> All the best,
> Tom
>
> On Nov 17, 2010, at 11:07 AM, John Hendy wrote:
>
> Thanks, Tom.
>
> I'm getting an error, though. I tried both settings from Section 1.2 (
> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php#sec-1_2)
> and get this error when I start emacs:
>
> ,-----
> | Symbol's value as variable is void: org-export-latex-classes
> `-----
>
> I just did a fresh git pull, make clean, make && make install just to be
> sure it wasn't just my version.
>
> What am I goofing up?
>
>
> Thanks,
> John
>
> On Wed, Nov 17, 2010 at 12:58 AM, Thomas S. Dye <tsd@tsdye.com> wrote:
>
>> Aloha John and Mario,
>>
>> I've moved my buggy development efforts to a branch and you can now pull a
>> stable version of Org-article if you're so inclined.
>>
>> All the best,
>> Tom
>>
>> On Nov 16, 2010, at 7:11 PM, John Hendy wrote:
>>
>> On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich <mariomu@ieee.org>wrote:
>>
>>> Dear all,
>>>
>>> I am trying to use the org-article class created by Tomas Dye. As you
>>> might guess, I am having some trouble and thus the email. I am using emacs
>>> 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>>>
>>> I have followed the instructions on worg:
>>>
>>> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>>>
>>> up to the point in which I need to tangle the org document.
>>>
>>> If I try to run the tangle command: M-x org-babel-tangle RET, I get the
>>> following error: No org-bable-execute function for python!
>>>
>>> I think that  the problem is that I do not have any setup for Babel in my
>>> .emacs, so I went to look for the standard Babel setup in the org manual and
>>> in worg.
>>>
>>
>> Yup -- that's the error.
>>
>>
>>>
>>> - In the org Manual, I see chapter 14 devoted to Babel, but I do not see
>>> any information on how to set it up in my .emacs (maybe it is enabled by
>>> default since Babel is included in org, but I am not sure).
>>>
>>>
>> I concur and think that's weird. Even if it is on worg... perhaps the
>> manual should point there? There's a decent amount on babel in the manual so
>> I found it a bit odd that it didn't provide the setup syntax (like Thomas
>> did).
>>
>>
>>> - In worg, there is a page for Babel:
>>> http://orgmode.org/worg/org-contrib/babel/index.php and a corresponding
>>> Introductory Tutorial. In this page, there is a section called Initial
>>> Configuration in which there is a mention of a "five-step process", but the
>>> corresponding list of steps only have 3 items.
>>>
>>
>> 5 vs. 3 is kind of funny. Some of those aren't really even steps. For your
>> case it's as easy as opening up .emacs and adding this:
>>
>> (org-babel-do-load-languages
>>  'org-babel-load-languages
>>  '((python . t)))
>>
>> Though as Thomas listed, you can have more. It looks like he actually puts
>> his right into the org file itself with a #+src block.
>>
>> As for the rest of the steps, I actually wasn't able to get it to compile.
>> I get a bunch of these errors:
>>
>> ,-----
>> | SyntaxError: invalid syntax
>> | File "<stdin>", line 17
>> |    print res
>> |            ^
>> | SyntaxError: invalid syntax
>> `-----
>>
>> I think I get those to go away with "print (res)" instead of res by
>> itself. I think I've had that error before and it's a python version issue.
>> I'd suggest changing it if it's accepted by older versions since python is
>> perhaps moving that direction? I run Arch Linux and would guess that I may
>> be on a later version than a lot of distros.
>>
>> I also get this at the end in the minibuffer at the very end:
>> ,-----
>> | reference "gantttest" not found in this buffer
>> `-----
>>
>> I get not class file.
>>
>>
>>>
>>> I would appreciate if somebody could guide me towards a simple Babel
>>> configuration that would help me tangle the org-article.org document.
>>>
>>>
>> It'd probably be a good idea for someone to clean up worg and the manual a
>> bit. I can do some of those things -- Thomas, perhaps you want to handle the
>> org-article specific things if there are some compilation issues on my end
>> that find fixes and I can make worg a little clearer about babel setup? Not
>> sure who oversees the manual, but a redirect at the least to worg for .emacs
>> configuration would be helpful.
>>
>>
>> John
>>
>>
>>> Thanks a lot for all the help!
>>>
>>> -Mario
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>>
>>
>
>

[-- Attachment #1.2: Type: text/html, Size: 8231 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: org-article setup
  2010-11-22  8:09         ` Mario E. Munich
@ 2010-11-22 17:04           ` Thomas S. Dye
  0 siblings, 0 replies; 12+ messages in thread
From: Thomas S. Dye @ 2010-11-22 17:04 UTC (permalink / raw)
  To: mariomu; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 5511 bytes --]

Aloha Mario,

Good news!  Don't hesitate to come back to the list if you have other  
questions.

All the best,
Tom

On Nov 21, 2010, at 10:09 PM, Mario E. Munich wrote:

> Dear Thomas and John,
>
> thanks a lot for the prompt reply! I just had time to follow the  
> instructions and it works!!!
>
> Best regards,
>
> -Mario
>
> On Wed, Nov 17, 2010 at 1:40 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> Hi John,
>
> Perhaps this is missing:
>
>   (require 'org-latex)
>
> Let me know if that fixes your problem and I'll add it to the  
> instructions.
>
> All the best,
> Tom
>
> On Nov 17, 2010, at 11:07 AM, John Hendy wrote:
>
>> Thanks, Tom.
>>
>> I'm getting an error, though. I tried both settings from Section  
>> 1.2 (http://orgmode.org/worg/org-contrib/babel/examples/article-class.php#sec-1_2 
>> ) and get this error when I start emacs:
>>
>> ,-----
>> | Symbol's value as variable is void: org-export-latex-classes
>> `-----
>>
>> I just did a fresh git pull, make clean, make && make install just  
>> to be sure it wasn't just my version.
>>
>> What am I goofing up?
>>
>>
>> Thanks,
>> John
>>
>> On Wed, Nov 17, 2010 at 12:58 AM, Thomas S. Dye <tsd@tsdye.com>  
>> wrote:
>> Aloha John and Mario,
>>
>> I've moved my buggy development efforts to a branch and you can now  
>> pull a stable version of Org-article if you're so inclined.
>>
>> All the best,
>> Tom
>>
>> On Nov 16, 2010, at 7:11 PM, John Hendy wrote:
>>
>>> On Tue, Nov 16, 2010 at 5:46 PM, Mario E. Munich  
>>> <mariomu@ieee.org> wrote:
>>> Dear all,
>>>
>>> I am trying to use the org-article class created by Tomas Dye. As  
>>> you might guess, I am having some trouble and thus the email. I am  
>>> using emacs 23.1.1 on Ubuntu 10.10 and org-mode verision TAG=7.3.
>>>
>>> I have followed the instructions on worg:
>>>
>>> http://orgmode.org/worg/org-contrib/babel/examples/article-class.php
>>>
>>> up to the point in which I need to tangle the org document.
>>>
>>> If I try to run the tangle command: M-x org-babel-tangle RET, I  
>>> get the following error: No org-bable-execute function for python!
>>>
>>> I think that  the problem is that I do not have any setup for  
>>> Babel in my .emacs, so I went to look for the standard Babel setup  
>>> in the org manual and in worg.
>>>
>>> Yup -- that's the error.
>>>
>>>
>>> - In the org Manual, I see chapter 14 devoted to Babel, but I do  
>>> not see any information on how to set it up in my .emacs (maybe it  
>>> is enabled by default since Babel is included in org, but I am not  
>>> sure).
>>>
>>>
>>> I concur and think that's weird. Even if it is on worg... perhaps  
>>> the manual should point there? There's a decent amount on babel in  
>>> the manual so I found it a bit odd that it didn't provide the  
>>> setup syntax (like Thomas did).
>>>
>>> - In worg, there is a page for Babel: http://orgmode.org/worg/org-contrib/babel/index.php 
>>>  and a corresponding Introductory Tutorial. In this page, there is  
>>> a section called Initial Configuration in which there is a mention  
>>> of a "five-step process", but the corresponding list of steps only  
>>> have 3 items.
>>>
>>> 5 vs. 3 is kind of funny. Some of those aren't really even steps.  
>>> For your case it's as easy as opening up .emacs and adding this:
>>>
>>> (org-babel-do-load-languages
>>>  'org-babel-load-languages
>>>  '((python . t)))
>>>
>>> Though as Thomas listed, you can have more. It looks like he  
>>> actually puts his right into the org file itself with a #+src block.
>>>
>>> As for the rest of the steps, I actually wasn't able to get it to  
>>> compile. I get a bunch of these errors:
>>>
>>> ,-----
>>> | SyntaxError: invalid syntax
>>> | File "<stdin>", line 17
>>> |    print res
>>> |            ^
>>> | SyntaxError: invalid syntax
>>> `-----
>>>
>>> I think I get those to go away with "print (res)" instead of res  
>>> by itself. I think I've had that error before and it's a python  
>>> version issue. I'd suggest changing it if it's accepted by older  
>>> versions since python is perhaps moving that direction? I run Arch  
>>> Linux and would guess that I may be on a later version than a lot  
>>> of distros.
>>>
>>> I also get this at the end in the minibuffer at the very end:
>>> ,-----
>>> | reference "gantttest" not found in this buffer
>>> `-----
>>>
>>> I get not class file.
>>>
>>>
>>> I would appreciate if somebody could guide me towards a simple  
>>> Babel configuration that would help me tangle the org-article.org  
>>> document.
>>>
>>>
>>> It'd probably be a good idea for someone to clean up worg and the  
>>> manual a bit. I can do some of those things -- Thomas, perhaps you  
>>> want to handle the org-article specific things if there are some  
>>> compilation issues on my end that find fixes and I can make worg a  
>>> little clearer about babel setup? Not sure who oversees the  
>>> manual, but a redirect at the least to worg for .emacs  
>>> configuration would be helpful.
>>>
>>>
>>> John
>>>
>>> Thanks a lot for all the help!
>>>
>>> -Mario
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Please use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>>
>
>


[-- Attachment #1.2: Type: text/html, Size: 8620 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2010-11-22 17:04 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-16 23:46 org-article setup Mario E. Munich
2010-11-17  0:24 ` Thomas S. Dye
2010-11-17  5:11 ` John Hendy
2010-11-17  5:37   ` Thomas S. Dye
2010-11-17  6:58   ` Thomas S. Dye
2010-11-17 21:07     ` John Hendy
2010-11-17 21:40       ` Thomas S. Dye
     [not found]         ` <AANLkTinOZrEUS4RxsMKUW7Jy+4s+Tjh9i+iANiUBpvsz@mail.gmail.com>
2010-11-17 22:47           ` Thomas S. Dye
2010-11-17 23:07             ` John Hendy
2010-11-22  8:09         ` Mario E. Munich
2010-11-22 17:04           ` Thomas S. Dye
2010-11-17  7:18 ` Thomas S. Dye

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).