* does #+PROPERTY still exist ?
@ 2010-09-22 5:21 Vincent Belaïche
2010-09-22 6:10 ` Nick Dokos
0 siblings, 1 reply; 15+ messages in thread
From: Vincent Belaïche @ 2010-09-22 5:21 UTC (permalink / raw)
To: Org mode; +Cc: Vincent Belaïche
In the org manual node `(org) Property syntax' one can read the
following:
--8<-------------coupez ici--------------début-------------->8---
If you want to set properties that can be inherited by any entry
in a file, use a line like
#+PROPERTY: NDisks_ALL 1 2 3 4
--8<-------------coupez ici---------------fin--------------->8---
However this does not seem to work.
What I did to get the same effect is place a property drawer before the
first title, and then set
#+OPTIONS: skip:t
In order to disable export of this drawer (because I am exporting
drawers in general).
I would like to know whether this is a bug, and if yes I can provide a
patch to the manual with work-around explained above.
BR,
Vincent.
PS: #+PROPERTY does not work with completion `C-M-i' either
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: does #+PROPERTY still exist ?
2010-09-22 5:21 does #+PROPERTY still exist ? Vincent Belaïche
@ 2010-09-22 6:10 ` Nick Dokos
2010-09-22 6:58 ` Noorul Islam K M
0 siblings, 1 reply; 15+ messages in thread
From: Nick Dokos @ 2010-09-22 6:10 UTC (permalink / raw)
To: =?iso-8859-1?Q?Vincent_Bela=EFche?=; +Cc: nicholas.dokos, Org mode
Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
> In the org manual node `(org) Property syntax' one can read the
> following:
>
>
> --8<-------------coupez ici--------------début-------------->8---
> If you want to set properties that can be inherited by any entry
> in a file, use a line like
> #+PROPERTY: NDisks_ALL 1 2 3 4
> --8<-------------coupez ici---------------fin--------------->8---
>
> However this does not seem to work.
In what way does it fail to work?
AFAICT, it works as advertised: after inserting the above line, I try to
insert a NDisks property with
C-c C-x p NDisks<RET>5<RET>
and it complains ("No match"). If I use e.g. 3 instead of 5, the
property is inserted.
Nick
>
> What I did to get the same effect is place a property drawer before the
> first title, and then set
>
> #+OPTIONS: skip:t
>
> In order to disable export of this drawer (because I am exporting
> drawers in general).
>
> I would like to know whether this is a bug, and if yes I can provide a
> patch to the manual with work-around explained above.
>
> BR,
> Vincent.
>
> PS: #+PROPERTY does not work with completion `C-M-i' either
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: does #+PROPERTY still exist ?
2010-09-22 6:10 ` Nick Dokos
@ 2010-09-22 6:58 ` Noorul Islam K M
2010-09-22 7:36 ` Nick Dokos
2010-09-22 9:05 ` Carsten Dominik
0 siblings, 2 replies; 15+ messages in thread
From: Noorul Islam K M @ 2010-09-22 6:58 UTC (permalink / raw)
To: nicholas.dokos; +Cc: =?iso-8859-1?Q?Vincent_Bela=EFche?=, Org mode
Nick Dokos <nicholas.dokos@hp.com> writes:
> Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
>
>> In the org manual node `(org) Property syntax' one can read the
>> following:
>>
>>
>> --8<-------------coupez ici--------------début-------------->8---
>> If you want to set properties that can be inherited by any entry
>> in a file, use a line like
>> #+PROPERTY: NDisks_ALL 1 2 3 4
>> --8<-------------coupez ici---------------fin--------------->8---
>>
>> However this does not seem to work.
>
> In what way does it fail to work?
>
> AFAICT, it works as advertised: after inserting the above line, I try to
> insert a NDisks property with
>
> C-c C-x p NDisks<RET>5<RET>
>
> and it complains ("No match"). If I use e.g. 3 instead of 5, the
> property is inserted.
>
In the below example
----------------------------------------------------------------
#+PROPERTY: Age 25
#+COLUMNS: %25ITEM %Age
* Heading 1
* Heading 2
----------------------------------------------------------------
When I try to use column view to edit the property it is not using the
format that I mentioned at the file level.
But the following one works
----------------------------------------------------------------
* Heading 1
:PROPERTIES:
:Age: 25
:COLUMNS: %25ITEM %Age
:END:
* Heading 2
----------------------------------------------------------------
Looks like the file level settings are not working.
Thanks and Regards
Noorul
--------------------------------------------------------------
> Nick
>
>>
>> What I did to get the same effect is place a property drawer before the
>> first title, and then set
>>
>> #+OPTIONS: skip:t
>>
>> In order to disable export of this drawer (because I am exporting
>> drawers in general).
>>
>> I would like to know whether this is a bug, and if yes I can provide a
>> patch to the manual with work-around explained above.
>>
>> BR,
>> Vincent.
>>
>> PS: #+PROPERTY does not work with completion `C-M-i' either
>>
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: Re: does #+PROPERTY still exist ?
2010-09-22 6:58 ` Noorul Islam K M
@ 2010-09-22 7:36 ` Nick Dokos
2010-09-22 8:09 ` Nick Dokos
2010-09-22 9:05 ` Carsten Dominik
1 sibling, 1 reply; 15+ messages in thread
From: Nick Dokos @ 2010-09-22 7:36 UTC (permalink / raw)
To: Noorul Islam K M; +Cc: nt=5FBela=3DEFche=3F=3D?=, nicholas.dokos, Org mode
Noorul Islam K M <noorul@noorul.com> wrote:
> Nick Dokos <nicholas.dokos@hp.com> writes:
>
> > Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
> >
> >> In the org manual node `(org) Property syntax' one can read the
> >> following:
> >>
> >>
> >> --8<-------------coupez ici--------------début-------------->8---
> >> If you want to set properties that can be inherited by any entry
> >> in a file, use a line like
> >> #+PROPERTY: NDisks_ALL 1 2 3 4
> >> --8<-------------coupez ici---------------fin--------------->8---
> >>
> >> However this does not seem to work.
> >
> > In what way does it fail to work?
> >
> > AFAICT, it works as advertised: after inserting the above line, I try to
> > insert a NDisks property with
> >
> > C-c C-x p NDisks<RET>5<RET>
> >
> > and it complains ("No match"). If I use e.g. 3 instead of 5, the
> > property is inserted.
> >
>
> In the below example
>
> ----------------------------------------------------------------
> #+PROPERTY: Age 25
> #+COLUMNS: %25ITEM %Age
>
> * Heading 1
> * Heading 2
> ----------------------------------------------------------------
>
> When I try to use column view to edit the property it is not using the
> format that I mentioned at the file level.
>
> But the following one works
>
> ----------------------------------------------------------------
> * Heading 1
> :PROPERTIES:
> :Age: 25
> :COLUMNS: %25ITEM %Age
> :END:
> * Heading 2
> ----------------------------------------------------------------
>
> Looks like the file level settings are not working.
>
If I evaluate the form
(org-entry-get (point) "Age" t)
with the point at any heading, I get "25". OTOH, even with
org-use-property-inheritance set to t, column view does not
show it. Ergo, it's a column view bug.
In org-columns-compute, I see
...
(while (re-search-backward re beg t)
(setq sumpos (match-beginning 0)
last-level level
level (org-outline-level)
val (org-entry-get nil property)
...
I suspect the val line needs to be
val (org-entry-get nil property org-use-property-inheritance)
instead.
HTH,
Nick
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: Re: does #+PROPERTY still exist ?
2010-09-22 7:36 ` Nick Dokos
@ 2010-09-22 8:09 ` Nick Dokos
2010-09-22 8:43 ` Noorul Islam K M
0 siblings, 1 reply; 15+ messages in thread
From: Nick Dokos @ 2010-09-22 8:09 UTC (permalink / raw)
To: nicholas.dokos; +Cc: nt=5FBela=3DEFche=3F=3D?=, Org mode, Noorul Islam K M
Nick Dokos <nicholas.dokos@hp.com> wrote:
> Noorul Islam K M <noorul@noorul.com> wrote:
>
> >
> > In the below example
> >
> > ----------------------------------------------------------------
> > #+PROPERTY: Age 25
> > #+COLUMNS: %25ITEM %Age
> >
> > * Heading 1
> > * Heading 2
> > ----------------------------------------------------------------
> >
> > When I try to use column view to edit the property it is not using the
> > format that I mentioned at the file level.
> >
> > But the following one works
> >
> > ----------------------------------------------------------------
> > * Heading 1
> > :PROPERTIES:
> > :Age: 25
> > :COLUMNS: %25ITEM %Age
> > :END:
> > * Heading 2
> > ----------------------------------------------------------------
> >
> > Looks like the file level settings are not working.
> >
>
> If I evaluate the form
>
> (org-entry-get (point) "Age" t)
>
> with the point at any heading, I get "25". OTOH, even with
> org-use-property-inheritance set to t, column view does not
> show it. Ergo, it's a column view bug.
>
> In org-columns-compute, I see
>
> ...
> (while (re-search-backward re beg t)
> (setq sumpos (match-beginning 0)
> last-level level
> level (org-outline-level)
> val (org-entry-get nil property)
> ...
>
> I suspect the val line needs to be
>
> val (org-entry-get nil property org-use-property-inheritance)
>
> instead.
>
No, that's not it. I think the basic problem is that
org-entry-properties ignores inheritance altogether (in particular,
it parses property names explicitly instead of using org-entry-get)[1].
Nick
[1] ... but it's late, I'm tired and I may very well be wrong - again.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: does #+PROPERTY still exist ?
2010-09-22 8:09 ` Nick Dokos
@ 2010-09-22 8:43 ` Noorul Islam K M
2010-09-22 8:56 ` Noorul Islam
0 siblings, 1 reply; 15+ messages in thread
From: Noorul Islam K M @ 2010-09-22 8:43 UTC (permalink / raw)
To: nicholas.dokos; +Cc: nt=5FBela=3DEFche=3F=3D?=, Org mode
Nick Dokos <nicholas.dokos@hp.com> writes:
> Nick Dokos <nicholas.dokos@hp.com> wrote:
>
>> Noorul Islam K M <noorul@noorul.com> wrote:
>>
>> >
>> > In the below example
>> >
>> > ----------------------------------------------------------------
>> > #+PROPERTY: Age 25
>> > #+COLUMNS: %25ITEM %Age
>> >
>> > * Heading 1
>> > * Heading 2
>> > ----------------------------------------------------------------
>> >
>> > When I try to use column view to edit the property it is not using the
>> > format that I mentioned at the file level.
>> >
>> > But the following one works
>> >
>> > ----------------------------------------------------------------
>> > * Heading 1
>> > :PROPERTIES:
>> > :Age: 25
>> > :COLUMNS: %25ITEM %Age
>> > :END:
>> > * Heading 2
>> > ----------------------------------------------------------------
>> >
>> > Looks like the file level settings are not working.
>> >
>>
>> If I evaluate the form
>>
>> (org-entry-get (point) "Age" t)
>>
>> with the point at any heading, I get "25". OTOH, even with
>> org-use-property-inheritance set to t, column view does not
>> show it. Ergo, it's a column view bug.
>>
>> In org-columns-compute, I see
>>
>> ...
>> (while (re-search-backward re beg t)
>> (setq sumpos (match-beginning 0)
>> last-level level
>> level (org-outline-level)
>> val (org-entry-get nil property)
>> ...
>>
>> I suspect the val line needs to be
>>
>> val (org-entry-get nil property org-use-property-inheritance)
>>
>> instead.
>>
>
> No, that's not it. I think the basic problem is that
> org-entry-properties ignores inheritance altogether (in particular,
> it parses property names explicitly instead of using org-entry-get)[1].
>
> Nick
>
> [1] ... but it's late, I'm tired and I may very well be wrong - again.
Well, following one works. It looks like we need _ALL suffix for
inherited properties.
----------------------------------------------
#+COLUMNS: %25ITEM %10Age
#+PROPERTY: Age_ALL 25
* Heading 1
* Heading 2
----------------------------------------------
Thanks and Regards
Noorul
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: does #+PROPERTY still exist ?
2010-09-22 8:43 ` Noorul Islam K M
@ 2010-09-22 8:56 ` Noorul Islam
0 siblings, 0 replies; 15+ messages in thread
From: Noorul Islam @ 2010-09-22 8:56 UTC (permalink / raw)
To: nicholas.dokos; +Cc: Vincent Belaïche, Org mode
On Wed, Sep 22, 2010 at 2:13 PM, Noorul Islam K M <noorul@noorul.com> wrote:
> Nick Dokos <nicholas.dokos@hp.com> writes:
>
>> Nick Dokos <nicholas.dokos@hp.com> wrote:
>>
>>> Noorul Islam K M <noorul@noorul.com> wrote:
>>>
>>> >
>>> > In the below example
>>> >
>>> > ----------------------------------------------------------------
>>> > #+PROPERTY: Age 25
>>> > #+COLUMNS: %25ITEM %Age
>>> >
>>> > * Heading 1
>>> > * Heading 2
>>> > ----------------------------------------------------------------
>>> >
>>> > When I try to use column view to edit the property it is not using the
>>> > format that I mentioned at the file level.
>>> >
>>> > But the following one works
>>> >
>>> > ----------------------------------------------------------------
>>> > * Heading 1
>>> > :PROPERTIES:
>>> > :Age: 25
>>> > :COLUMNS: %25ITEM %Age
>>> > :END:
>>> > * Heading 2
>>> > ----------------------------------------------------------------
>>> >
>>> > Looks like the file level settings are not working.
>>> >
>>>
>>> If I evaluate the form
>>>
>>> (org-entry-get (point) "Age" t)
>>>
>>> with the point at any heading, I get "25". OTOH, even with
>>> org-use-property-inheritance set to t, column view does not
>>> show it. Ergo, it's a column view bug.
>>>
>>> In org-columns-compute, I see
>>>
>>> ...
>>> (while (re-search-backward re beg t)
>>> (setq sumpos (match-beginning 0)
>>> last-level level
>>> level (org-outline-level)
>>> val (org-entry-get nil property)
>>> ...
>>>
>>> I suspect the val line needs to be
>>>
>>> val (org-entry-get nil property org-use-property-inheritance)
>>>
>>> instead.
>>>
>>
>> No, that's not it. I think the basic problem is that
>> org-entry-properties ignores inheritance altogether (in particular,
>> it parses property names explicitly instead of using org-entry-get)[1].
>>
>> Nick
>>
>> [1] ... but it's late, I'm tired and I may very well be wrong - again.
>
> Well, following one works. It looks like we need _ALL suffix for
> inherited properties.
>
> ----------------------------------------------
> #+COLUMNS: %25ITEM %10Age
> #+PROPERTY: Age_ALL 25
>
> * Heading 1
> * Heading 2
> ----------------------------------------------
>
To summarize:
Whatever Vincent said not working is working for me.
Org-mode version 7.01trans (release_7.01h.555.g90cc)
GNU Emacs 23.1.1 (i686-pc-linux-gnu, GTK+ Version 2.12.12) of
2010-01-30 on noorul
Thanks and Regards
Noorul
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: does #+PROPERTY still exist ?
2010-09-22 6:58 ` Noorul Islam K M
2010-09-22 7:36 ` Nick Dokos
@ 2010-09-22 9:05 ` Carsten Dominik
2010-09-22 9:17 ` Noorul Islam K M
1 sibling, 1 reply; 15+ messages in thread
From: Carsten Dominik @ 2010-09-22 9:05 UTC (permalink / raw)
To: Noorul Islam K M
Cc: =?iso-8859-1?Q?Vincent_Bela=EFche?=, nicholas.dokos, Org mode
On Sep 22, 2010, at 8:58 AM, Noorul Islam K M wrote:
> Nick Dokos <nicholas.dokos@hp.com> writes:
>
>> Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
>>
>>> In the org manual node `(org) Property syntax' one can read the
>>> following:
>>>
>>>
>>> --8<-------------coupez ici--------------début-------------->8---
>>> If you want to set properties that can be inherited by any entry
>>> in a file, use a line like
>>> #+PROPERTY: NDisks_ALL 1 2 3 4
>>> --8<-------------coupez ici---------------fin--------------->8---
>>>
>>> However this does not seem to work.
>>
>> In what way does it fail to work?
>>
>> AFAICT, it works as advertised: after inserting the above line, I
>> try to
>> insert a NDisks property with
>>
>> C-c C-x p NDisks<RET>5<RET>
>>
>> and it complains ("No match"). If I use e.g. 3 instead of 5, the
>> property is inserted.
>>
>
> In the below example
>
> ----------------------------------------------------------------
> #+PROPERTY: Age 25
> #+COLUMNS: %25ITEM %Age
>
> * Heading 1
> * Heading 2
> ----------------------------------------------------------------
>
> When I try to use column view to edit the property it is not using the
> format that I mentioned at the file level.
>
> But the following one works
>
> ----------------------------------------------------------------
> * Heading 1
> :PROPERTIES:
> :Age: 25
> :COLUMNS: %25ITEM %Age
> :END:
> * Heading 2
> ----------------------------------------------------------------
>
> Looks like the file level settings are not working.
They are, but
1. inheritance is not on by default, you need to enable
if for specific properties.
2. Column view never looks at inherited values. That iswhy it is
not using org-entry-get with an inheritance flag. Column view
only shows and edits properties that are local to each entry.
Otherwise, editing an inherited value would silently
edit it also for other entries.
I hope this makes it a bit clearer.
- Carsten
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: does #+PROPERTY still exist ?
2010-09-22 9:05 ` Carsten Dominik
@ 2010-09-22 9:17 ` Noorul Islam K M
2010-09-22 9:39 ` Carsten Dominik
0 siblings, 1 reply; 15+ messages in thread
From: Noorul Islam K M @ 2010-09-22 9:17 UTC (permalink / raw)
To: Carsten Dominik; +Cc: Bela=EFche?=, nicholas.dokos, Org mode
Carsten Dominik <carsten.dominik@gmail.com> writes:
> On Sep 22, 2010, at 8:58 AM, Noorul Islam K M wrote:
>
>> Nick Dokos <nicholas.dokos@hp.com> writes:
>>
>>> Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
>>>
>>>> In the org manual node `(org) Property syntax' one can read the
>>>> following:
>>>>
>>>>
>>>> --8<-------------coupez ici--------------début-------------->8---
>>>> If you want to set properties that can be inherited by any entry
>>>> in a file, use a line like
>>>> #+PROPERTY: NDisks_ALL 1 2 3 4
>>>> --8<-------------coupez ici---------------fin--------------->8---
>>>>
>>>> However this does not seem to work.
>>>
>>> In what way does it fail to work?
>>>
>>> AFAICT, it works as advertised: after inserting the above line, I
>>> try to
>>> insert a NDisks property with
>>>
>>> C-c C-x p NDisks<RET>5<RET>
>>>
>>> and it complains ("No match"). If I use e.g. 3 instead of 5, the
>>> property is inserted.
>>>
>>
>> In the below example
>>
>> ----------------------------------------------------------------
>> #+PROPERTY: Age 25
>> #+COLUMNS: %25ITEM %Age
>>
>> * Heading 1
>> * Heading 2
>> ----------------------------------------------------------------
>>
>> When I try to use column view to edit the property it is not using the
>> format that I mentioned at the file level.
>>
>> But the following one works
>>
>> ----------------------------------------------------------------
>> * Heading 1
>> :PROPERTIES:
>> :Age: 25
>> :COLUMNS: %25ITEM %Age
>> :END:
>> * Heading 2
>> ----------------------------------------------------------------
>>
>> Looks like the file level settings are not working.
>
> They are, but
>
> 1. inheritance is not on by default, you need to enable
> if for specific properties.
>
> 2. Column view never looks at inherited values. That iswhy it is
> not using org-entry-get with an inheritance flag. Column view
> only shows and edits properties that are local to each entry.
> Otherwise, editing an inherited value would silently
> edit it also for other entries.
I have this variable org-use-property-inheritance set as 'nil' and have
the following contents in the file.
----------------------------------------------------------
#+COLUMNS: %25ITEM %10Age
#+PROPERTY: Age_ALL 1 2 3 4 5 6
* Heading 1
* Heading 2
----------------------------------------------------------
With this I am able to edit Age property using C-c C-x C-c and by
pressing e on Age column for both the headings.
Thanks and Regards
Noorul
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: does #+PROPERTY still exist ?
2010-09-22 9:17 ` Noorul Islam K M
@ 2010-09-22 9:39 ` Carsten Dominik
0 siblings, 0 replies; 15+ messages in thread
From: Carsten Dominik @ 2010-09-22 9:39 UTC (permalink / raw)
To: Noorul Islam K M
Cc: =?iso-8859-1?Q?Vincent_Bela=EFche?=, nicholas.dokos, Org mode
On Sep 22, 2010, at 11:17 AM, Noorul Islam K M wrote:
> Carsten Dominik <carsten.dominik@gmail.com> writes:
>
>> On Sep 22, 2010, at 8:58 AM, Noorul Islam K M wrote:
>>
>>> Nick Dokos <nicholas.dokos@hp.com> writes:
>>>
>>>> Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
>>>>
>>>>> In the org manual node `(org) Property syntax' one can read the
>>>>> following:
>>>>>
>>>>>
>>>>> --8<-------------coupez ici--------------début-------------->8---
>>>>> If you want to set properties that can be inherited by any entry
>>>>> in a file, use a line like
>>>>> #+PROPERTY: NDisks_ALL 1 2 3 4
>>>>> --8<-------------coupez ici---------------fin--------------->8---
>>>>>
>>>>> However this does not seem to work.
>>>>
>>>> In what way does it fail to work?
>>>>
>>>> AFAICT, it works as advertised: after inserting the above line, I
>>>> try to
>>>> insert a NDisks property with
>>>>
>>>> C-c C-x p NDisks<RET>5<RET>
>>>>
>>>> and it complains ("No match"). If I use e.g. 3 instead of 5, the
>>>> property is inserted.
>>>>
>>>
>>> In the below example
>>>
>>> ----------------------------------------------------------------
>>> #+PROPERTY: Age 25
>>> #+COLUMNS: %25ITEM %Age
>>>
>>> * Heading 1
>>> * Heading 2
>>> ----------------------------------------------------------------
>>>
>>> When I try to use column view to edit the property it is not using
>>> the
>>> format that I mentioned at the file level.
>>>
>>> But the following one works
>>>
>>> ----------------------------------------------------------------
>>> * Heading 1
>>> :PROPERTIES:
>>> :Age: 25
>>> :COLUMNS: %25ITEM %Age
>>> :END:
>>> * Heading 2
>>> ----------------------------------------------------------------
>>>
>>> Looks like the file level settings are not working.
>>
>> They are, but
>>
>> 1. inheritance is not on by default, you need to enable
>> if for specific properties.
>>
>> 2. Column view never looks at inherited values. That iswhy it is
>> not using org-entry-get with an inheritance flag. Column view
>> only shows and edits properties that are local to each entry.
>> Otherwise, editing an inherited value would silently
>> edit it also for other entries.
>
> I have this variable org-use-property-inheritance set as 'nil' and
> have
> the following contents in the file.
>
> ----------------------------------------------------------
> #+COLUMNS: %25ITEM %10Age
> #+PROPERTY: Age_ALL 1 2 3 4 5 6
>
> * Heading 1
> * Heading 2
> ----------------------------------------------------------
>
> With this I am able to edit Age property using C-c C-x C-c and by
> pressing e on Age column for both the headings.
yes. the _ALL properties are an exception and always inherited.
- Carsten
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: does #+PROPERTY still exist ?
@ 2010-09-23 3:13 Vincent Belaïche
2010-09-23 3:26 ` Erik Iverson
2010-09-23 4:23 ` Nick Dokos
0 siblings, 2 replies; 15+ messages in thread
From: Vincent Belaïche @ 2010-09-23 3:13 UTC (permalink / raw)
To: Org mode; +Cc: Vincent Belaïche
Hello all,
Thanks for all the feedback. I am using Org-mode version 6.33x which is
the latest on emacs CVS repository --- that may be outdated as emacs is
using bazaar now.
What is not working is
1. Auto-completion of `#+PROP' does not work
2. `C-c C-x p' does not work.
Look at the following example:
--8<-------------coupez ici--------------début-------------->8---
#+PROPERTY: toto_ALL 1 2 3
* test
Then I type here `C-c C-x p'
--8<-------------coupez ici---------------fin--------------->8---
2.1 The completion at `Property:' prompt does not propose `toto'
2.2 The completion at `Value:' prompt does not propose 1 2 or 3
Hope that this clarifies the issue.
Vincent.
PS-1: Where can I get the latest org-mode ?
PS-2: Sorry for my first email contained an error, setting properties
before the 1st heading does not work.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: does #+PROPERTY still exist ?
2010-09-23 3:13 Vincent Belaïche
@ 2010-09-23 3:26 ` Erik Iverson
2010-09-23 4:23 ` Nick Dokos
1 sibling, 0 replies; 15+ messages in thread
From: Erik Iverson @ 2010-09-23 3:26 UTC (permalink / raw)
To: Vincent Belaïche; +Cc: Org mode
On 09/22/2010 10:13 PM, Vincent Belaïche wrote:
> Hello all,
>
> Thanks for all the feedback. I am using Org-mode version 6.33x which is
> the latest on emacs CVS repository --- that may be outdated as emacs is
> using bazaar now.
>
Yes, very outdated. Orgmode 7.01 was released over two months ago now.
You can get the latest from http://orgmode.org
It is a very simple installation, just download and add a couple
directories to your load-path.
You can also get the latest from git, which is what I do.
> What is not working is
>
> 1. Auto-completion of `#+PROP' does not work
> 2. `C-c C-x p' does not work.
>
> Look at the following example:
>
> --8<-------------coupez ici--------------début-------------->8---
> #+PROPERTY: toto_ALL 1 2 3
>
> * test
>
> Then I type here `C-c C-x p'
> --8<-------------coupez ici---------------fin--------------->8---
>
> 2.1 The completion at `Property:' prompt does not propose `toto'
> 2.2 The completion at `Value:' prompt does not propose 1 2 or 3
>
>
> Hope that this clarifies the issue.
>
> Vincent.
>
> PS-1: Where can I get the latest org-mode ?
> PS-2: Sorry for my first email contained an error, setting properties
> before the 1st heading does not work.
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: does #+PROPERTY still exist ?
2010-09-23 3:13 Vincent Belaïche
2010-09-23 3:26 ` Erik Iverson
@ 2010-09-23 4:23 ` Nick Dokos
2010-09-23 4:34 ` Nick Dokos
1 sibling, 1 reply; 15+ messages in thread
From: Nick Dokos @ 2010-09-23 4:23 UTC (permalink / raw)
To: =?iso-8859-1?Q?Vincent_Bela=EFche?=; +Cc: nicholas.dokos, Org mode
Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
> Thanks for all the feedback. I am using Org-mode version 6.33x which is
> the latest on emacs CVS repository --- that may be outdated as emacs is
> using bazaar now.
>
> What is not working is
>
> 1. Auto-completion of `#+PROP' does not work
Indeed: #+PROPERTY is missing from org-get-current-options in
org-exp.el.
> 2. `C-c C-x p' does not work.
>
That should say: *completion* in C-c C-x p (org-set-property)
does not work. The function itself works just fine.
> Look at the following example:
>
> --8<-------------coupez ici--------------début-------------->8---
> #+PROPERTY: toto_ALL 1 2 3
>
> * test
>
> Then I type here `C-c C-x p'
> --8<-------------coupez ici---------------fin--------------->8---
>
> 2.1 The completion at `Property:' prompt does not propose `toto'
> 2.2 The completion at `Value:' prompt does not propose 1 2 or 3
>
Yes. I don't know how difficult it would be to add these features.
>
> Hope that this clarifies the issue.
>
Yes, thsnks!
Nick
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Re: does #+PROPERTY still exist ?
2010-09-23 4:23 ` Nick Dokos
@ 2010-09-23 4:34 ` Nick Dokos
2010-09-23 5:19 ` Vincent Belaïche
0 siblings, 1 reply; 15+ messages in thread
From: Nick Dokos @ 2010-09-23 4:34 UTC (permalink / raw)
To: nicholas.dokos; +Cc: nt=5FBela=3DEFche=3F=3D?=, Org mode
Nick Dokos <nicholas.dokos@hp.com> wrote:
> Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
>
> ...
> > 2.2 The completion at `Value:' prompt does not propose 1 2 or 3
> >
>
> Yes. I don't know how difficult it would be to add these features.
>
Actually, pressing <TAB> after the value prompt *does* produce the list
of allowed values in the more-or-less current version I'm running:
Org-mode version 7.01trans (release_7.01h.500.gbbac.dirty)
Nick
^ permalink raw reply [flat|nested] 15+ messages in thread
* RE: Re: does #+PROPERTY still exist ?
2010-09-23 4:34 ` Nick Dokos
@ 2010-09-23 5:19 ` Vincent Belaïche
2010-09-23 6:28 ` Carsten Dominik
0 siblings, 1 reply; 15+ messages in thread
From: Vincent Belaïche @ 2010-09-23 5:19 UTC (permalink / raw)
To: nicholas.dokos; +Cc: emacs-orgmode
[-- Attachment #1.1: Type: text/plain, Size: 1146 bytes --]
Thanks for the feedback,
I'll download the latest.
Yes, I just meant that *completion* does not work for property name, addition of property works fine.
Vincent.
> To: nicholas.dokos@hp.com
> From: nicholas.dokos@hp.com
> Subject: Re: [Orgmode] Re: does #+PROPERTY still exist ?
> Date: Thu, 23 Sep 2010 00:34:19 -0400
> CC: vincent.b.1@hotmail.fr; emacs-orgmode@gnu.org;
>
> Nick Dokos <nicholas.dokos@hp.com> wrote:
>
> > Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
> >
> > ...
> > > 2.2 The completion at `Value:' prompt does not propose 1 2 or 3
> > >
> >
> > Yes. I don't know how difficult it would be to add these features.
> >
>
> Actually, pressing <TAB> after the value prompt *does* produce the list
> of allowed values in the more-or-less current version I'm running:
>
> Org-mode version 7.01trans (release_7.01h.500.gbbac.dirty)
>
> Nick
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
[-- Attachment #1.2: Type: text/html, Size: 1572 bytes --]
[-- Attachment #2: Type: text/plain, Size: 201 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: Re: does #+PROPERTY still exist ?
2010-09-23 5:19 ` Vincent Belaïche
@ 2010-09-23 6:28 ` Carsten Dominik
0 siblings, 0 replies; 15+ messages in thread
From: Carsten Dominik @ 2010-09-23 6:28 UTC (permalink / raw)
To: Vincent Belaïche; +Cc: nicholas.dokos, emacs-orgmode
On Sep 23, 2010, at 7:19 AM, Vincent Belaïche wrote:
> Thanks for the feedback,
>
> I'll download the latest.
>
> Yes, I just meant that *completion* does not work for property name,
> addition of property works fine.
I have just fixed this issue, now completion should work on both the #
+property
keyword itself, as well as the property name after it.
Cheers
- Carsten
>
> Vincent.
>
> > To: nicholas.dokos@hp.com
> > From: nicholas.dokos@hp.com
> > Subject: Re: [Orgmode] Re: does #+PROPERTY still exist ?
> > Date: Thu, 23 Sep 2010 00:34:19 -0400
> > CC: vincent.b.1@hotmail.fr; emacs-orgmode@gnu.org;
> >
> > Nick Dokos <nicholas.dokos@hp.com> wrote:
> >
> > > Vincent Belaïche <vincent.b.1@hotmail.fr> wrote:
> > >
> > > ...
> > > > 2.2 The completion at `Value:' prompt does not propose 1 2 or 3
> > > >
> > >
> > > Yes. I don't know how difficult it would be to add these features.
> > >
> >
> > Actually, pressing <TAB> after the value prompt *does* produce the
> list
> > of allowed values in the more-or-less current version I'm running:
> >
> > Org-mode version 7.01trans (release_7.01h.500.gbbac.dirty)
> >
> > Nick
> >
> >
> > _______________________________________________
> > Emacs-orgmode mailing list
> > Please use `Reply All' to send replies to the list.
> > Emacs-orgmode@gnu.org
> > http://lists.gnu.org/mailman/listinfo/emacs-orgmode
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2010-09-23 7:18 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-09-22 5:21 does #+PROPERTY still exist ? Vincent Belaïche
2010-09-22 6:10 ` Nick Dokos
2010-09-22 6:58 ` Noorul Islam K M
2010-09-22 7:36 ` Nick Dokos
2010-09-22 8:09 ` Nick Dokos
2010-09-22 8:43 ` Noorul Islam K M
2010-09-22 8:56 ` Noorul Islam
2010-09-22 9:05 ` Carsten Dominik
2010-09-22 9:17 ` Noorul Islam K M
2010-09-22 9:39 ` Carsten Dominik
-- strict thread matches above, loose matches on Subject: below --
2010-09-23 3:13 Vincent Belaïche
2010-09-23 3:26 ` Erik Iverson
2010-09-23 4:23 ` Nick Dokos
2010-09-23 4:34 ` Nick Dokos
2010-09-23 5:19 ` Vincent Belaïche
2010-09-23 6:28 ` Carsten Dominik
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).