Release 8.0

[Bastien <bzg@gnu.org>]

[-- Attachment #1: Type: text/plain, Size: 556 bytes --]

Dear all,

I'm releasing Org 8.0.

See the release notes below or at http://orgmode.org/Changes.html

This release is potentially the most disruptive release since long,
so please don't use it in production before you can carefully review
the release notes and update your configuration -- especially with
respect to export features.

I would like to thank you all again for your patience, and special
thanks to Nicolas who is just great to work with.  I'm happy to see
his code finally widely available for all Org users, not just the
happy few.

Enjoy!


[-- Attachment #2: Changes.txt --]
[-- Type: text/plain, Size: 54062 bytes --]

			    ━━━━━━━━━━━━━━━━
				ORG 8.0
			    ━━━━━━━━━━━━━━━━


Installation
════════════

  Installation instructions have been updated and simplified.

  If you have troubles installing or updating Org, focus on these
  instructions:

  • when updating via a `.zip/.tar.gz' file, you only need to set the
    `load-path' in your `.emacs'.  Set it before any other Org
    customization that would call autoloaded Org functions.

  • when updating by pulling Org's Git repository, make sure to create
    the correct autoloads.  You can do this by running `~$ make
    autoloads' (to only create the autoloads) or by running `~$ make'
    (to also compile the Emacs lisp files.)  `~$ make help' and `~$ make
    helpall' gives you detailed explanations.

  • when updating through ELPA (either from GNU ELPA or from Org ELPA),
    you have to install Org's ELPA package in a session where no Org
    function has been called already.

  When in doubt, run `M-x org-version RET' and see if you have a
  mixed-up installation.

  See [http://orgmode.org/org.html#Installation] for details.


Incompatible changes
════════════════════

  Org 8.0 is the most disruptive major version of Org.

  If you configured export options, you will have to update some of
  them.

  If you used `#+ATTR_*' keywords, the syntax of the attributes changed
  and you will have to update them.

  Below is a list of changes for which you need to take action.

  See [http://orgmode.org/worg/org-8.0.html] for the most recent version
  of this list and for detailed instructions on how to migrate.


New export engine
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  Org 8.0 comes with a new export engine written by Nicolas Goaziou.
  This export engine relies on `org-element.el' (Org's syntax parser),
  which was already in Org's core.  This new export engine triggered the
  rewriting of /all/ export back-ends.

  The most visible change is the export dispatcher, accessible through
  the keybinding `C-c C-e'.  By default, this menu only shows some of
  the built-in export formats, but you can add more formats by loading
  them directly (e.g., `(require 'ox-texinfo)' or by configuring the
  option org-export-backends.

  More contributed back-ends are available from the `contrib/'
  directory, the corresponding files start with the `ox-' prefix.

  If you customized an export back-end (like HTML or LaTeX), you will
  need to rename some options so that your customization is not lost.
  Typically, an option starting with `org-export-html-' is now named
  `org-html-'.  See the manual for details and check [this Worg page]
  for directions.


  [this Worg page] http://orgmode.org/worg/org-8.0.html


New syntax for #+ATTR_HTML/LaTeX/… options
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  ╭────
  │ #+ATTR_HTML width="200px"
  ╰────

  should now be written

  ╭────
  │ #+ATTR_HTML :width 200px
  ╰────

  Keywords like `#+ATTR_HTML' and `#+ATTR_LaTeX' are defined in their
  respective back-ends, and the list of supported parameters depends on
  each backend.  See Org's manual for details.


`org-remember.el' has been removed
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  You cannot use `remember.el' anymore to capture notes.

  Support for remember templates has been obsoleted since long, it is
  now fully removed.

  Use `M-x org-capture-import-remember-templates RET' to import your
  remember templates into capture templates.


`org-jsinfo.el' has been merged into `ox-html.el'
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  If you were requiring `ox-jsinfo.el' in your `.emacs.el' file, you
  will have to remove this requirement from your initialization file.


Note for third-party developers
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  The name of the files for export back-end have changed: we now use the
  prefix `ox-' for those files (like we use the `ob-' prefix for Babel
  files.)  For example `org-html.el' is now `ox-html.el'.

  If your code relies on these files, please update the names in your
  code.


Packages moved from core to contrib
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  Since packages in Org's core are meant to be part of GNU Emacs, we try
  to be minimalist when it comes to adding files into core.  For 8.0, we
  moved some contributions into the `contrib/' directory.

  The rationale for deciding that these files should live in `contrib/'
  is either because they rely on third-part softwares that are not
  included in Emacs, or because they are not targetting a significant
  user-base.

  • org-colview-xemacs.el
  • org-mac-message.el
  • org-mew.el
  • org-wl.el
  • ox-freedmind.el
  • ox-taskjuggler.el

  Note that `ox-freedmind.el' has been rewritten by Jambunathan,
  `org-mew.el' has been enhanced by Tokuya Kameshima and
  `ox-taskjuggler.el' by Nicolas Goaziou and others.

  Also, the Taskjuggler exporter now uses TJ3 by default.  John Hendy
  wrote [a tutorial on Worg] for the TJ3 export.


  [a tutorial on Worg]
  http://orgmode.org/worg/org-tutorials/org-taskjuggler3.html


New packages in core
════════════════════

`ob-makefile.el' by Eric Schulte and Thomas S. Dye
──────────────────────────────────────────────────

  `ob-makefile.el' implements Org Babel support for Makefile tangling.


`ox-man.el' by Luis Anaya
─────────────────────────

  `ox-man.el' allows you to export Org files to `man' pages.


`ox-md.el' by Nicolas Goaziou
─────────────────────────────

  `ox-md.el' allows you to export Org files to Markdown files, using the
  vanilla [Markdown syntax].


  [Markdown syntax] http://daringfireball.net/projects/markdown/


`ox-texinfo.el' by Jonathan Leech-Pepin
───────────────────────────────────────

  `ox-texinfo.el' allows you to export Org files to [Texinfo] files.


  [Texinfo] http://www.gnu.org/software/texinfo/


New packages in contrib
═══════════════════════

`ob-julia.el' by G. Jay Kerns
─────────────────────────────

  [Julia] is a new programming language.

  `ob-julia.el' provides Org Babel support for evaluating Julia source
  code.


  [Julia] http://julialang.org/


`ob-mathomatic.el' by Luis Anaya
────────────────────────────────

  [mathomatic] a portable, command-line, educational CAS and calculator
  software, written entirely in the C programming language.

  `ob-mathomatic.el' provides Org Babel support for evaluating
  mathomatic entries.


  [mathomatic] http://www.mathomatic.org/


`ob-tcl.el' by Luis Anaya
─────────────────────────

  `ob-tcl.el' provides Org Babel support for evaluating [Tcl] source
  code.


  [Tcl] http://www.tcl.tk/


`org-bullets.el' by Evgeni Sabof
────────────────────────────────

  Display bullets instead of stars for headlines.

  Also see [this updated FAQ] on how to display another character than
  "*" for starting headlines.


  [this updated FAQ] http://orgmode.org/worg/org-faq.html#sec-8-12


`org-favtable.el' by Marc-Oliver Ihm
────────────────────────────────────

  `org-favtable.el' helps you to create and update a table of favorite
  locations in org, keeping the most frequently visited lines right at
  the top.  This table is called "favtable".  See the documentation on
  [Worg].


  [Worg] http://orgmode.org/worg/org-contrib/org-favtable.html


`ox-confluence.el' by Sébastien Delafond
────────────────────────────────────────

  `ox-confluence.el' lets you convert Org files to [Confluence Wiki]
  files.


  [Confluence Wiki]
  https://confluence.atlassian.com/display/DOC/Confluence%2BWiki%2BMarkup


`ox-deck.el' and `ox-s5.el' by Rick Frankel
───────────────────────────────────────────

  [deck.js] is a javascript library for displaying HTML ages as
  presentations.  `ox-deck.el' exports Org files to HTML presentations
  using `deck.js'.

  [s5] is a set of scripts which also allows to display HTML pages as
  presentations.  `ox-s5.el' exports Org files to HTML presentations
  using `s5'.


  [deck.js] http://imakewebthings.com/deck.js/

  [s5] http://meyerweb.com/eric/tools/s5/


`ox-groff.el' by Luis Anaya and Nicolas Goaziou
───────────────────────────────────────────────

  The [groff] (GNU troff) software is a typesetting package which reads
  plain text mixed with formatting commands and produces formatted
  output.

  Luis Anaya and Nicolas Goaziou implemented `ox-groff.el' to allow
  conversion from Org files to groff.


  [groff] http://www.gnu.org/software/groff/


`ox-koma-letter.el' by Nicolas Goaziou and Alan Schmitt
───────────────────────────────────────────────────────

  This back-end allow to export Org pages to the `KOMA Scrlttr2' format.


`ox-rss.el' by Bastien
──────────────────────

  This back-end lets you export Org pages to RSS 2.0 feeds.  Combined
  with the HTML publishing feature, this allows you to build a blog
  entirely with Org.


New features
════════════

Export
──────

New export generic options
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  If you use Org exporter, we advise you to re-read [the manual section
  about it].  It has been updated and includes new options.

  Among the new/updated export options, three are of particular
  importance:

  org-export-allow-bind-keywords: This option replaces the old option
      `org-export-allow-BIND' and the default value is `nil', not
      `confirm'.  You will need to explicitely set this to `t' in your
      initialization file if you want to allow `#+BIND' keywords.

  org-export-with-planning: This new option controls the export of
      `SCHEDULED:, DEADLINE:, CLOSED:' lines, and planning information is
      now skipped by default during export.  This use to be the job of
      org-export-with-timestamps, but this latter option has been given a
      new role: it controls the export of /standalone time-stamps/.  When
      set to `nil', Org will not export active and inactive time-stamps
      standing on a line by themselves or within a paragraph that only
      contains time-stamps.

  To check if an option has been introduced or its default value changed
  in Org 8.0, do `C-h v [option] RET' and check if the documentation
  says that the variable has been introduced (or changed) in version
  24.4 of Emacs.


  [the manual section about it] http://orgmode.org/org.html#Exporting


Enhanced default stylesheet for the HTML exporter
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  See the new default value of org-html-style-default.


New tags, classes and ids for the HTML exporter
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  See the new default value of org-html-divs.


Support for tikz pictures in LaTeX export
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


`org-man.el': New export function for "man" links
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


`org-docview.el': New export function for docview links
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


Structure editing
─────────────────

`C-u C-u M-RET' inserts a heading at the end of the parent subtree
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


Cycling to the `CONTENTS' view keeps inline tasks folded
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  org-cycle-hook as a new function org-cycle-hide-inline-tasks which
  prevents the display of inline tasks when showing the content of a
  subtree.


`C-c -' in a region makes a list item for each line
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This is the opposite of the previous behavior, where `C-c -' on a
  region would create one item for the whole region, and where `C-u C-c
  -' would create an item for each line.  Now `C-c -' on the selected
  region creates an item per line, and `C-u C-c -' creates a single item
  for the whole region.


When transposing words, markup characters are now part of the words
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  In Emacs, you can transpose words with `M-t'.  Transposing `*these*
  _words__' will preserve markup.


New command org-set-property-and-value bound to `C-c C-x P'
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This command allows you to quickly add both the property and its
  value.  It is useful in buffers where there are many properties and
  where `C-c C-x p' can slow down the flow of editing too much.


New commands org-next-block and org-previous-block
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  These commands allow you to go to the previous block (`C-c M-b' or the
  speedy key `B') or to the next block (`C-c M-f' or the speedy key
  `F'.)


New commands org-drag-line-forward and org-drag-line-backward
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  These commands emulate the old behavior of `M-<down>' and `M-<up>' but
  are now bound to `S-M-<down>' and `S-M-<up>' respectively, since
  `M-<down>' and `M-<up>' now drag the whole element at point (a
  paragraph, a table, etc.)  forward and backward.


When a list item has a checkbox, inserting a new item uses a checkbox too
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


When sorting entries/items, only the description of links is considered
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  Now Org will sort this list

  ╭────
  │ - [[http://abc.org][B]]
  │ - [[http://def.org][A]]
  ╰────

  like this:

  ╭────
  │ - [[http://def.org][A]]
  │ - [[http://abc.org][B]]
  ╰────

  by comparing the descriptions, not the links.  Same when sorting
  headlines instead of list items.


New option `orgstruct-heading-prefix-regexp'
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  For example, setting this option to "^;;; " in Emacs lisp files and
  using `orgstruct-mode' in those files will allow you to cycle through
  visibility states as if lines starting with ";;; *…" where headlines.

  In general, you want to set `orgstruct-heading-prefix-regexp' as a
  file local variable.


New behavior of org-clone-subtree-with-time-shift
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  The default is to only ask for a number of clones.  When called with a
  universal prefix argument `C-u', it will prompt you for a time-shift
  only if there is a time-stamp in the task you want to clone.


New option org-agenda-restriction-lock-highlight-subtree
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This defaults to `t' so that the whole subtree is highlighted when you
  restrict the agenda view to it with `C-c C-x <' (or the speed command
  `<').  The default setting helps ensuring that you are not adding
  tasks after the restricted region.  If you find this highlighting too
  intrusive, set this option to `nil'.


New option org-closed-keep-when-no-todo
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  When switching back from a `DONE' keyword to a `TODO' keyword, Org now
  removes the `CLOSED' planning information, if any.  It also removes
  this information when going back to a non-TODO state (e.g., with `C-c
  C-t SPC').  If you want to keep the `CLOSED' planning information when
  removing the TODO keyword, set org-closed-keep-when-no-todo to `t'.


New option org-image-actual-width
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This option allows you to change the width of in-buffer displayed
  images.  The default is to use the actual width of the image, but you
  can use a fixed value for all images, or fall back on an attribute
  like

  ╭────
  │ #+attr_html: :width 300px
  ╰────


Scheduled/deadline
──────────────────

Implement "delay" cookies for scheduled items
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  If you want to delay the display of a scheduled task in the agenda,
  you can now use a delay cookie like this: `SCHEDULED: <2004-12-25 Sat
  -2d>'.  The task is still scheduled on the 25th but will appear in
  your agenda starting from two days later (i.e. from March 27th.)

  Imagine for example that your co-workers are not done in due time and
  tell you "we need two more days".  In that case, you may want to delay
  the display of the task in your agenda by two days, but you still want
  the task to appear as scheduled on March 25th.

  In case the task contains a repeater, the delay is considered to
  affect all occurrences; if you want the delay to only affect the first
  scheduled occurrence of the task, use `--2d' instead.  See
  org-scheduled-delay-days and
  org-agenda-skip-scheduled-delay-if-deadline for details on how to
  control this globally or per agenda.


Use `C-u C-u C-s' will insert a delay cookie for scheduled tasks
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  See the previous section for why delay cookies may be useful.


Use `C-u C-u C-d' will insert a warning delay for deadline tasks
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  `C-u C-u C-d' now inserts a warning delay to deadlines.


Calendar, diary and appts
─────────────────────────

New variable org-read-date-minibuffer-local-map
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  By default, this new local map uses "." to go to today's date, like in
  the normal `M-x calendar RET'.  If you want to deactivate this and to
  reassign the "@" key to `calendar-goto-today', use this:

  ╭────
  │ ;; Unbind "." in Org's calendar:
  │ (define-key org-read-date-minibuffer-local-map (kbd ".") nil)
  │
  │ ;; Bind "@" to `calendar-goto-today':
  │ (define-key org-read-date-minibuffer-local-map
  │             (kbd "@")
  │             (lambda () (interactive) (org-eval-in-calendar '(calendar-goto-today))))
  ╰────


In Org's calendar, `!' displays diary entries of the date at point
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This is useful when you want to check if you don't already have an
  appointment when setting new ones with `C-c .' or `C-c s'.  `!' will
  call `diary-view-entries' and display the diary in a separate buffer.


org-diary: only keep the descriptions of links
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  org-diary returns diary information from Org files, but it returns it
  in a diary buffer, not in an Org mode buffer.  When links are
  displayed, only show their description, not the full links.


Agenda
──────

New agenda type `agenda*' and entry types `:scheduled* :deadline*'
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  When defining agenda custom commands, you can now use `agenda*': this
  will list entries that have both a date and a time.  This is useful
  when you want to build a list of appointments.

  You can also set org-agenda-entry-types either globally or locally in
  each agenda custom command and use `:timestamp*' and/or `:deadline*'
  there.

  Another place where this is useful is your `.diary' file:

  ╭────
  │ %%(org-diary :scheduled*) ~/org/rdv.org
  ╰────

  This will list only entries from `~/org/rdv.org' that are scheduled
  with a time value (i.e. appointments).


New agenda sorting strategies
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  org-agenda-sorting-strategy allows these new sorting strategies:

  ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
   Strategy        Explanations
  ──────────────────────────────────────────────────────────
   timestamp-up    Sort by any timestamp, early first
   timestamp-down  Sort by any timestamp, late first
   scheduled-up    Sort by scheduled timestamp, early first
   scheduled-down  Sort by scheduled timestamp, late first
   deadline-up     Sort by deadline timestamp, early first
   deadline-down   Sort by deadline timestamp, late first
   ts-up           Sort by active timestamp, early first
   ts-down         Sort by active timestamp, late first
   tsia-up         Sort by inactive timestamp, early first
   tsia-down       Sort by inactive timestamp, late first
  ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━


New options to limit the number of agenda entries
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  You can now limit the number of entries in an agenda view.  This is
  different from filters: filters only /hide/ the entries in the agenda,
  while limits are set while generating the list of agenda entries.

  These new options are available:

  org-agenda-max-entries: limit by number of entries.
  org-agenda-max-todos: limit by number of TODOs.
  org-agenda-max-tags: limit by number of tagged entries.
  org-agenda-max-effort: limit by effort (minutes).

  For example, if you locally set org-agenda-max-todos to 3 in an agenda
  view, the agenda will be limited to the first three todos.  Other entries
  without a TODO keyword or beyond the third TODO headline will be ignored.

  When setting a limit (e.g. about an effort's sum), the default behavior
  is to exclude entries that cannot be checked against (e.g. entries that
  have no effort property.)  To include other entries too, you can set the
  limit to a negative number.  For example (setq org-agenda-max-tags 3)
  will not show the fourth tagged headline (and beyond), but it will also
  show non-tagged headlines.


`~' in agenda view sets temporary limits
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  You can hit `~' in the agenda to temporarily set limits: this will
  regenerate the agenda as if the limits were set.  This is useful for
  example when you want to only see a list of `N' tasks, or a list of
  tasks that take only `N' minutes.


"=" in agenda view filters by regular expressions
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  You can now filter agenda entries by regular expressions using `='.
  `C-u =' will filter entries out.  Regexp filters are cumulative.  You
  can set org-agenda-regexp-filter-preset to suit your needs in each
  agenda view.


`|' in agenda view resets all filters
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  Since it's common to combine tag filters, category filters, and now
  regexp filters, there is a new command `|' to reset all filters at
  once.


Allow writing an agenda to an `.org' file
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  You can now write an agenda view to an `.org' file.  It copies the
  headlines and their content (but not subheadings) into the new file.

  This is useful when you want to quickly share an agenda containing the
  full list of notes.


New commands to drag an agenda line forward (`M-<down>') or backard (`M-<up>')
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  It sometimes handy to move agenda lines around, just to quickly
  reorganize your tasks, or maybe before saving the agenda to a file.
  Now you can use `M-<down>' and `M-<up>' to move the line forward or
  backward.

  This does not persist after a refresh of the agenda, and this does not
  change the `.org' files who contribute to the agenda.


Use `%s' for displaying "breadcrumbs" in the agenda view
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  org-agenda-prefix-format now allows to use a `%b' formatter to tell
  Org to display "breadcrumbs" in the agenda view.

  This is useful when you want to display the task hierarchy in your
  agenda.


Use `%l' for displaying the headline's level in the agenda view
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  org-agenda-prefix-format allows to use a `%l' formatter to tell Org to
  display entries with additional spaces corresponding to their level in
  the outline tree.


org-agenda-write will ask before overwriting an existing file
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  `M-x org-agenda-write RET' (or `C-c C-w' from an agenda buffer) used
  to overwrite preexisting file with the same name without confirmation.
  It now asks for a confirmation.


New commands `M-m' and `M-*' to toggle (all) mark(s) for bulk action
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  org-agenda-bulk-toggle: this command is bound to `M-m' and toggles the
      mark of the entry at point.

  org-agenda-bulk-toggle-all: this command is bound to `M-*' and toggles
      all the marks in the current agenda.


New option org-agenda-search-view-max-outline-level
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This option sets the maximum outline level to display in search view.
  E.g. when this is set to 1, the search view will only show headlines
  of level 1.


New option org-agenda-todo-ignore-time-comparison-use-seconds
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This allows to compare times using seconds instead of days when
  honoring options like `org-agenda-todo-ignore-*' in the agenda
  display.


New option org-agenda-entry-text-leaders
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This allows you to get rid of the ">" character that gets added in
  front of entries excerpts when hitting `E' in the agenda view.


New formatting string for past deadlines in org-agenda-deadline-leaders
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  The default formatting for past deadlines is `"%2d d. ago: "', which
  makes it explicit that the deadline is in the past.  You can configure
  this via org-agenda-deadline-leaders.  Note that the width of the
  formatting string is important to keep the agenda alignment clean.


New allowed value `repeated-after-deadline' for org-agenda-skip-scheduled-if-deadline-is-shown
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  When org-agenda-skip-scheduled-if-deadline-is-shown is set to
  `repeated-after-deadline', the agenda will skip scheduled items if
  they are repeated beyond the current dealine.


New option for org-agenda-skip-deadline-prewarning-if-scheduled
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This variable may be set to nil, t, the symbol `pre-scheduled', or a
  number which will then give the number of days before the actual
  deadline when the prewarnings should resume.  The symbol
  `pre-scheduled' eliminates the deadline prewarning only prior to the
  scheduled date.

  Read the full docstring for details.


org-class now supports holiday strings in the skip-weeks parameter
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  For example, this task will now be skipped only on new year's day:

  ╭────
  │ * Task
  │   <%%(org-class 2012 1 1 2013 12 12 2 "New Year's Day")>
  ╰────


Capture
───────

Allow `C-1' as a prefix for org-agenda-capture and org-capture
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  With a `C-1' prefix, the capture mechanism will use the `HH:MM' value
  at point (if any) or the current `HH:MM' time as the default time for
  the capture template.


Expand keywords within %(sexp) placeholder in capture templates
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  If you use a `%:keyword' construct within a `%(sexp)' construct, Org
  will expand the keywords before expanding the `%(sexp)'.


Allow to contextualize capture (and agenda) commands by checking the name of the buffer
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  org-capture-templates-contexts and org-agenda-custom-commands-contexts
  allow you to define what capture templates and what agenda commands
  should be available in various contexts.  It is now possible for the
  context to check against the name of the buffer.


Tag groups
──────────

  Using `#+TAGS: { Tag1 : Tag2 Tag3 }' will define `Tag1' as a /group
  tag/ (note the colon after `Tag1').  If you search for `Tag1', it will
  return headlines containing either `Tag1', `Tag2' or `Tag3' (or any
  combinaison of those tags.)

  You can use group tags for sparse tree in an Org buffer, for creating
  agenda views, and for filtering.

  See [http://orgmode.org/org.html#Tag-groups] for details.


Links
─────

`C-u C-u M-x org-store-link RET' will ignore non-core link functions
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  Org knows how to store links from Org buffers, from info files and
  from other Emacs buffers.  Org can be taught how to store links from
  any buffer through new link protocols (see ["Adding hyperlink types"]
  in the manual.)

  Sometimes you want Org to ignore added link protocols and store the
  link as if the protocol was not known.

  You can now do this with `C-u C-u M-x org-store-link RET'.


  ["Adding hyperlink types"]
  http://orgmode.org/org.html#Adding-hyperlink-types


`C-u C-u C-u M-x org-store-link RET' on an active region will store links for each lines
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  Imagine for example that you want to store a link for every message in
  a Gnus summary buffer.  In that case `C-x h C-u C-u C-u M-x
  org-store-link RET' will store a link for every line (i.e. message) if
  the region is active.


`C-c C-M-l' will add a default description for links which don't have one
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  `C-c C-M-l' inserts all stored links.  If a link does not have a
  description, this command now adds a default one, so that we are not
  mixing with-description and without-description links when inserting
  them.


No curly braces to bracket links within internal links
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  When storing a link to a headline like

  ╭────
  │ * See [[http://orgmode.org][Org website]]
  ╰────

  org-store-link used to convert the square brackets into curly
  brackets.  It does not anymore, taking the link description or the
  link path, when there is no description.


Table
─────

Switching between #+TBLFM lines
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  If you have several `#+TBLFM' lines below a table, `C-c C-c' on a line
  will apply the formulas from this line, and `C-c C-c' on another line
  will apply those other formulas.


You now use "nan" for empty fields in Calc formulas
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  If empty fields are of interest, it is recommended to reread the
  section [3.5.2 Formula syntax for Calc] of the manual because the
  description for the mode strings has been clarified and new examples
  have been added towards the end.


  [3.5.2 Formula syntax for Calc]
  http://orgmode.org/org.html#Formula-syntax-for-Calc


Handle localized time-stamps in formulas evaluation
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  If your `LOCALE' is set so that Org time-stamps use another language
  than english, and if you make time computations in Org's table, it now
  works by internally converting the time-stamps with a temporary
  `LOCALE=C' before doing computation.


New lookup functions
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  There are now three lookup functions:

  • org-loopup-first
  • org-loopup-last
  • org-loopup-all

  See [the manual] for details.


  [the manual] http://orgmode.org/org.html#Lookup-functions


Startup keywords
────────────────

  These new startup keywords are now available:

  ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
   Startup keyword                   Option
  ───────────────────────────────────────────────────────────────────────────────
   `#+STARTUP: logdrawer'            `(setq org-log-into-drawer t)'
   `#+STARTUP: nologdrawer'          `(setq org-log-into-drawer nil)'
  ───────────────────────────────────────────────────────────────────────────────
   `#+STARTUP: logstatesreversed'    `(setq org-log-states-order-reversed t)'
   `#+STARTUP: nologstatesreversed'  `(setq org-log-states-order-reversed nil)'
  ───────────────────────────────────────────────────────────────────────────────
   `#+STARTUP: latexpreview'         `(setq org-startup-with-latex-preview t)'
   `#+STARTUP: nolatexpreview'       `(setq org-startup-with-latex-preview nil)'
  ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━


Clocking
────────

New option org-clock-rounding-minutes
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  E.g. if org-clock-rounding-minutes is set to 5, time is 14:47 and you
  clock in: then the clock starts at 14:45.  If you clock out within the
  next 5 minutes, the clock line will be removed; if you clock out 8
  minutes after your clocked in, the clock out time will be 14:50.


New option org-time-clocksum-use-effort-durations
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  When non-nil, `C-c C-x C-d' uses effort durations.  E.g., by default,
  one day is considered to be a 8 hours effort, so a task that has been
  clocked for 16 hours will be displayed as during 2 days in the clock
  display or in the clocktable.

  See org-effort-durations on how to set effort durations and
  org-time-clocksum-format for more on time clock formats.


New option org-clock-x11idle-program-name
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This allows to set the name of the program which prints X11 idle time
  in milliseconds.  The default is to use `x11idle'.


New option org-use-last-clock-out-time-as-effective-time
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  When non-nil, use the last clock out time for org-todo.  Note that
  this option has precedence over the combined use of
  org-use-effective-time and org-extend-today-until.


`S-<left/right>' on a clocksum column will update the sum by updating the last clock
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


`C-u 3 C-S-<up/down>' will update clock timestamps synchronously by 3 units
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


New parameter `:wstart' for clocktables to define the week start day
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


New parameter `:mstart' to state the starting day of the month
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


Allow relative times in clocktable tstart and tend options
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


The clocktable summary is now a caption
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


`:tstart' and `:tend' and friends allow relative times like "<-1w>" or "<now>"
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


Babel
─────

You can now use `C-c C-k' for org-edit-src-abort
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This allows you to quickly cancel editing a source block.


`C-u C-u M-x org-babel-tangle RET' tangles by the target file of the block at point
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This is handy if you want to tangle all source code blocks that have
  the same target than the block at point.


New options for auto-saving the base buffer or the source block editing buffer
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  When org-edit-src-turn-on-auto-save is set to `t', editing a source
  block in a new window will turn on `auto-save-mode' and save the code
  in a new file under the same directory than the base Org file.

  When org-edit-src-auto-save-idle-delay is set to a number of minutes
  `N', the base Org buffer will be saved after this number of minutes of
  idle time.


New `:post' header argument post-processes results
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  This header argument may be used to pass the results of the current
  code block through another code block for post-processing.  See the
  manual for a usage example.


Commented out heading are ignored when collecting blocks for tangling
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  If you comment out a heading (with `C-c ;' anywhere on the heading or
  in the subtree), code blocks from within this heading are now ignored
  when collecting blocks for tangling.


New option org-babel-hash-show-time to show a time-stamp in the result hash
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


Do not ask for confirmation if cached value is current
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  Do not run org-babel-confirm-evaluate if source block has a cache and
  the cache value is current as there is no evaluation involved in this
  case.


`ob-sql.el' and `ob-python.el' have been improved.
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌


New Babel files only need to `(require 'ob)'
╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌╌

  When writing a new Babel file, you now only need to use `(require
  'ob)' instead of requiring each Babel library one by one.


Faces
─────

  • Org now fontifies radio link targets by default
  • In the agenda, use org-todo-keyword-faces to highlight selected TODO
    keywords
  • New face org-priority, enhanced fontification of priority cookies in
    agenda
  • New face org-tag-group for group tags


Miscellaneous
═════════════

  • New speedy key `s' pour org-narrow-to-subtree
  • Handling of org-html-table-row has been updated (incompatible change)
  • org-export-html-table-tag is replaced by org-html-table-default-attributes
  • Support using `git-annex' with Org attachments
  • org-protocol: Pass optional value using query in url to capture from protocol
  • When the refile history is empty, use the current filename as default
  • When you cannot change the TODO state of a task, Org displays the
    blocking task
  • New option org-mobile-allpriorities
  • org-bibtex.el now use `visual-line-mode' instead of the deprecated
    `longlines-mode'
  • org-format-latex-options allows to set the foreground/background
    colors automatically
  • New option org-archive-file-header-format
  • New "neg" entity in org-entities
  • New function org-docview-export to export docview links
  • New `:eps' header argument for ditaa code blocks
  • New option org-gnus-no-server to start Gnus with `gnus-no-server'
  • Org is now distributed with `htmlize.el' version 1.43
  • `org-drill.el' has been updated to version 2.3.7
  • `org-mac-iCal.el' now supports MacOSX version up to 10.8
  • Various improvements to `org-contacts.el' and `orgpan.el'


Outside Org
═══════════

Spanish translation of the Org guide by David Arroyo Menéndez
─────────────────────────────────────────────────────────────

  David (and others) translated the Org compact guide in spanish:

  You can read the [PDF guide].


  [PDF guide] http://orgmode.org/worg/orgguide/orgguide.es.pdf


`poporg.el' and `outorg.el'
───────────────────────────

  Two new libraries (`poporg.el' by François Pinard and `outorg.el' by
  Thorsten Jolitz) now enable editing of comment-sections from
  source-code buffers in temporary Org-mode buffers, making the full
  editing power of Org-mode available.  `outorg.el' comes together with
  `outshine.el' and `navi-mode.el', two more libraries by Thorsten
  Jolitz with the goal to give source-code buffers the /look & feel/ of
  Org-mode buffers while greatly improving navigation and structure
  editing.  A detailed description can be found here:
  [http://orgmode.org/worg/org-tutorials/org-outside-org.html]

  Here are two screencasts demonstrating Thorsten's tools:

  • ["Modern conventions for Emacs Lisp files"]
  • [Exploring Bernt Hansen's Org-mode tutorial with 'navi-mode']


  ["Modern conventions for Emacs Lisp files"]
  http://youtu.be/nqE6YxlY0rw

  [Exploring Bernt Hansen's Org-mode tutorial with 'navi-mode']
  http://www.youtube.com/watch?v%3DII-xYw5VGFM


MobileOrg for iOS
─────────────────

  MobileOrg for iOS back in the App Store The 1.6.0 release was focused
  on the new Dropbox API and minor bug fixes but also includes a new
  ability to launch in Capture mode.  Track development and contribute
  [on github].


  [on github] https://github.com/MobileOrg/mobileorg/issues


Thanks you all!
════════=======

Here is a list of people we need to thanks for this release:

Aaron Ecay, Abdó Roig-Maranges, Achim Gratz, Adam Spiers, Alan Schmitt,
Alexander Willand, Andreas Leha, Andreas Röhler, Andrew M. Nuxoll, Arun
Persaud, Bernd Haug, Bernt Hansen, Bill Day, Bill White, Brian van den
Broek, Carsten Dominik, Charles C. Berry, Christian Egli, Christian Moe,
Christophe Junke, Christopher Schmidt, Christopher Witte, Chuck Berry,
Daniel Clemente, Daniel Dehennin, Dave Abrahams, David Kincaid, Derek
Upham, Enda, Eric Abrahamsen, Eric S Fraga, Eric Schulte, Esben Stien,
Fabrice Popineau, Feng Shu, Florian Beck, Francesco Pizzolante, Frank
Fischer, Frank Terbeck, François Pinard, G. Jay Kerns, Gaizka Villate, Gary
Oberbrunner, Greg Minshall, Gregor Kappler, Grégoire Jadi, Henry Atting,
Hiroshi Saito, Hrvoje Nikšić, Ian Barton, Ingo Lohmar, Ippei FURUHASHI,
Ivan Vilata i Balaguer, J. David Boyd, Jae Hee Lee, Jambunathan K, James
Harkins, Jarmo Hurri, John Foerch, John Hendy, John J Foerch, John Wiegley,
Jonas Bernoulli, Jonathan Leech-Pepin, Joost Helberg, Justus Piater, Kalev
Takkis, Ken Williams, Kevin Buchs, Kodi Arfer, Kyle Machulis, Le Wang, Leo
Liu, Luca Sabbatini, Luis Anaya, Marcel van der Boom, Mark Edgington, Matt
Lundin, Max Mikhanosha, Michael Brand, Michael Crouch, Michael Gauland,
Michael Heerdegen, Michael Strey, Mirko Vukovic, Myles English, Nick Dokos,
Nicolas Goaziou, Nicolas Richard, Oliver Večerník, Paul Sexton, Peder
Stray, Peter Münster, Philipp Kroos, Raghavendra D Prabhu, Rainer M. Krug,
Rainer Stengele, Rasmus, Rene, Richard Stanton, Rick Frankel, Rick Hanson,
Robert Goldman, Robert Horn, Robert Klein, Roland Winkler, Ryo TAKAISHI,
Rémi Vanicat, Rüdiger Sonderfeld, Sacha Chua, Samuel Loury, Samuel Wales,
Sean O'Halpin, Sébastien Vauban, Simon Thum, Stefan Monnier, Stefan
Vollmar, Stephen Eglen, Steve Purcell, Suhail Shergill, Suvayu Ali,
T.F. Torrey, Thomas S. Dye, Thorsten Jolitz, Toby S. Cubitt, Tokuya
Kameshima, Tony Day, Viktor Rosenfeld, Vincent Beffara, Vladimir Lomov,
Wanrong Lin, William Lechelle, Xiao-Yong Jin, Xue Fuqiao, Yann Hodique,
Yasushi SHOJI, Zech, sabof, Дядов Васил Стоянов.

[-- Attachment #3: Type: text/plain, Size: 14 bytes --]


-- 
 Bastien