* ODT preferred format option per-file?
@ 2012-08-31 4:53 James Harkins
2012-09-01 18:45 ` Jambunathan K
0 siblings, 1 reply; 6+ messages in thread
From: James Harkins @ 2012-08-31 4:53 UTC (permalink / raw)
To: emacs-orgmode
Hi,
I have one particular org file that I would like to export to PDF by way of ODT. (I already set up outline styling in LibreOffice and I would like to use that, instead of trying to reconfigure a similar look in LaTeX. For fun, I did try the LaTeX pdf export and the output format is not what I need for this case.)
But I may want to export other org files to ODT *without* converting them to PDF.
http://orgmode.org/manual/Extending-ODT-export.html
This says I can customize the org-export-odt-preferred-output-format variable. This works beautifully, but it's a global setting that will apply to every ODT export.
So my question is -- is there any export option for the preferred format, per file? Something like:
#+ODT_PREFERRED_FORMAT: pdf
I couldn't find any documentation in the ODT export section of the manual for an option like this.
Alternately, I suppose I could write a lisp function that would set the variable and call the export, but that would definitely be a hack.
Thanks in advance,
hjh
--
James Harkins /// dewdrop world
jamshark70@dewdrop-world.net
http://www.dewdrop-world.net
"Come said the Muse,
Sing me a song no poet has yet chanted,
Sing me the universal." -- Whitman
blog: http://www.dewdrop-world.net/words
audio clips: http://www.dewdrop-world.net/audio
more audio: http://soundcloud.com/dewdrop_world/tracks
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ODT preferred format option per-file?
2012-08-31 4:53 ODT preferred format option per-file? James Harkins
@ 2012-09-01 18:45 ` Jambunathan K
2012-09-01 20:40 ` Jambunathan K
2012-09-02 9:25 ` Nicolas Goaziou
0 siblings, 2 replies; 6+ messages in thread
From: Jambunathan K @ 2012-09-01 18:45 UTC (permalink / raw)
To: James Harkins; +Cc: emacs-orgmode
James Harkins <jamshark70@gmail.com> writes:
> Hi,
>
> I have one particular org file that I would like to export to PDF by
> way of ODT. (I already set up outline styling in LibreOffice and I
> would like to use that, instead of trying to reconfigure a similar
> look in LaTeX. For fun, I did try the LaTeX pdf export and the output
> format is not what I need for this case.)
>
> But I may want to export other org files to ODT *without* converting them to PDF.
>
> http://orgmode.org/manual/Extending-ODT-export.html
>
> This says I can customize the org-export-odt-preferred-output-format
> variable. This works beautifully, but it's a global setting that will
> apply to every ODT export.
>
> So my question is -- is there any export option for the preferred
> format, per file? Something like:
>
> #+ODT_PREFERRED_FORMAT: pdf
>
> I couldn't find any documentation in the ODT export section of the
> manual for an option like this.
>
> Alternately, I suppose I could write a lisp function that would set
> the variable and call the export, but that would definitely be a hack.
Old exporter
============
If you are using org-odt.el, then you can use file local variables. I
have pushed a fix which makes string values of this variable safe.
M-x add-file-local-variable RET org-export-odt-preferred-output-format
RET "pdf" RET
Or
Add the following to your Org file. Remember to re-visit the file to
activate the newly installed value.
# Local Variables:
# org-export-odt-preferred-output-format: "pdf"
# End:
New exporter
============
The above local variable trick will fail in case of org-e-odt.el. When
I get some time I will introduce a per-buffer keyword for this variable.
--
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: ODT preferred format option per-file?
2012-09-01 18:45 ` Jambunathan K
@ 2012-09-01 20:40 ` Jambunathan K
2012-09-02 8:43 ` Bastien
2012-09-02 9:25 ` Nicolas Goaziou
1 sibling, 1 reply; 6+ messages in thread
From: Jambunathan K @ 2012-09-01 20:40 UTC (permalink / raw)
To: James Harkins; +Cc: emacs-orgmode
Jambunathan K <kjambunathan@gmail.com> writes:
> James Harkins <jamshark70@gmail.com> writes:
>
>> Hi,
>>
>> I have one particular org file that I would like to export to PDF by
>> way of ODT. (I already set up outline styling in LibreOffice and I
>> would like to use that, instead of trying to reconfigure a similar
>> look in LaTeX. For fun, I did try the LaTeX pdf export and the output
>> format is not what I need for this case.)
>>
>> But I may want to export other org files to ODT *without* converting them to PDF.
>>
>> http://orgmode.org/manual/Extending-ODT-export.html
>>
>> This says I can customize the org-export-odt-preferred-output-format
>> variable. This works beautifully, but it's a global setting that will
>> apply to every ODT export.
>>
>> So my question is -- is there any export option for the preferred
>> format, per file? Something like:
>>
>> #+ODT_PREFERRED_FORMAT: pdf
>>
>> I couldn't find any documentation in the ODT export section of the
>> manual for an option like this.
>>
>> Alternately, I suppose I could write a lisp function that would set
>> the variable and call the export, but that would definitely be a hack.
>
> Old exporter
> ============
>
> If you are using org-odt.el, then you can use file local variables. I
> have pushed a fix which makes string values of this variable safe.
>
> M-x add-file-local-variable RET org-export-odt-preferred-output-format
> RET "pdf" RET
>
> Or
>
> Add the following to your Org file. Remember to re-visit the file to
> activate the newly installed value.
>
> # Local Variables:
> # org-export-odt-preferred-output-format: "pdf"
> # End:
>
>
> New exporter
> ============
>
> The above local variable trick will fail in case of org-e-odt.el. When
> I get some time I will introduce a per-buffer keyword for this
> variable.
I was wrong about the new exporter - org-e-odt.el.
I didn't realize I need to change variable name. One should use the new
`org-e-odt-preferred-output-format' instead.
--
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ODT preferred format option per-file?
2012-09-01 18:45 ` Jambunathan K
2012-09-01 20:40 ` Jambunathan K
@ 2012-09-02 9:25 ` Nicolas Goaziou
1 sibling, 0 replies; 6+ messages in thread
From: Nicolas Goaziou @ 2012-09-02 9:25 UTC (permalink / raw)
To: Jambunathan K; +Cc: James Harkins, emacs-orgmode
Hello,
Jambunathan K <kjambunathan@gmail.com> writes:
> James Harkins <jamshark70@gmail.com> writes:
>
>> I have one particular org file that I would like to export to PDF by
>> way of ODT. (I already set up outline styling in LibreOffice and I
>> would like to use that, instead of trying to reconfigure a similar
>> look in LaTeX. For fun, I did try the LaTeX pdf export and the output
>> format is not what I need for this case.)
>>
>> But I may want to export other org files to ODT *without* converting them to PDF.
>>
>> http://orgmode.org/manual/Extending-ODT-export.html
>>
>> This says I can customize the org-export-odt-preferred-output-format
>> variable. This works beautifully, but it's a global setting that will
>> apply to every ODT export.
>>
>> So my question is -- is there any export option for the preferred
>> format, per file? Something like:
>>
>> #+ODT_PREFERRED_FORMAT: pdf
>>
>> I couldn't find any documentation in the ODT export section of the
>> manual for an option like this.
>>
>> Alternately, I suppose I could write a lisp function that would set
>> the variable and call the export, but that would definitely be a hack.
>
> Old exporter
> ============
>
> If you are using org-odt.el, then you can use file local variables. I
> have pushed a fix which makes string values of this variable safe.
>
> M-x add-file-local-variable RET org-export-odt-preferred-output-format
> RET "pdf" RET
>
> Or
>
> Add the following to your Org file. Remember to re-visit the file to
> activate the newly installed value.
>
> # Local Variables:
> # org-export-odt-preferred-output-format: "pdf"
> # End:
>
>
> New exporter
> ============
>
> The above local variable trick will fail in case of org-e-odt.el. When
> I get some time I will introduce a per-buffer keyword for this variable.
Note that Org provides a BIND mechanism for such cases.
So, adding:
#+BIND: org-e-export-opt-preferred-output-format "pdf"
somewhere in the buffer should be enough.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: ODT preferred format option per-file?
@ 2012-09-02 8:57 James Harkins
0 siblings, 0 replies; 6+ messages in thread
From: James Harkins @ 2012-09-02 8:57 UTC (permalink / raw)
To: Jambunathan K; +Cc: emacs-orgmode
# Local Variables:
# org-export-odt-preferred-output-format: "pdf"
# End:
This is a great help, thanks. Will pull and try it tonight.
I suppose I must be using the old exporter, since the variable without -e- enabled PDF conversion. That's working fine for me, but I should probably look into the new exporter (assuming the old one will be removed sometime). Good to know how to do it in both cases.
Thanks again!
hjh
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-09-02 11:46 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-08-31 4:53 ODT preferred format option per-file? James Harkins
2012-09-01 18:45 ` Jambunathan K
2012-09-01 20:40 ` Jambunathan K
2012-09-02 8:43 ` Bastien
2012-09-02 9:25 ` Nicolas Goaziou
-- strict thread matches above, loose matches on Subject: below --
2012-09-02 8:57 James Harkins
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).