emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Cleaning up my org setup, using version from git
@ 2013-03-22 20:04 Marcelo de Moraes Serpa
  2013-03-22 21:02 ` Nick Dokos
  0 siblings, 1 reply; 9+ messages in thread
From: Marcelo de Moraes Serpa @ 2013-03-22 20:04 UTC (permalink / raw)
  To: Org Mode

[-- Attachment #1: Type: text/plain, Size: 1841 bytes --]

Hey guys,

I'm trying to update to org 8.0, and also clean up my org setup, as it
looks like it still loads some of the .el files out of the Emacs std
distribution (I'm using  Emacs 23.4.1 (x86_64-apple-darwin, NS
apple-appkit-1038.36)).

I have org in ~/.emacs.d/vendor/org, and I also added the following lines
to my init.el:

(add-to-list load-path (cons (concat dotfiles-dir "vendor/org/lisp")
 load-path))
(add-to-list load-path (cons (concat dotfiles-dir
"vendor/org/contrib/lisp")  load-path))

But it fails hard when emacs inits:

Warning (initialization): An error occurred while loading
> `/Users/fullofcaffeine/.emacs.d/init.el':
> error: Autoloading failed to define function org-babel-do-load-languages
> To ensure normal operation, you should investigate and remove the
> cause of the error in your initialization file.  Start Emacs with
> the `--debug-init' option to view a complete error backtrace.



When I try to "make autoloads" I get the following:

>
> org git:(master): make autoloads
> ======================================================
> = Invoke "make help" for a synopsis of make targets. =
> = Created a default local.mk template.               =
> = Setting "oldorg" as the default target.            =
> = Please adapt local.mk to your local setup!         =
> ======================================================
> End of file during parsing
> make: [local.mk] Error 255 (ignored)
> make -C lisp autoloads
> rm -f org-version.el org-loaddefs.el org-version.elc org-loaddefs.elc
> org-install.elc
> org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> End of file during parsing
> make[1]: *** [org-version.el] Error 255
> make: *** [autoloads] Error 2


Not sure where to go from here.

How could I clean up the org installation so Emacs only loads the version
from git?

Thanks in advance,

- Marcelo.

[-- Attachment #2: Type: text/html, Size: 2705 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Cleaning up my org setup, using version from git
  2013-03-22 20:04 Cleaning up my org setup, using version from git Marcelo de Moraes Serpa
@ 2013-03-22 21:02 ` Nick Dokos
  2013-03-22 21:27   ` Marcelo de Moraes Serpa
  0 siblings, 1 reply; 9+ messages in thread
From: Nick Dokos @ 2013-03-22 21:02 UTC (permalink / raw)
  To: Marcelo de Moraes Serpa; +Cc: Org Mode

Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:


> I have org in ~/.emacs.d/vendor/org, and I also added the following lines to my init.el:
> 
> (add-to-list load-path (cons (concat dotfiles-dir "vendor/org/lisp")  load-path))
> (add-to-list load-path (cons (concat dotfiles-dir "vendor/org/contrib/lisp")  load-path))
> 
> But it fails hard when emacs inits:
> 
>     Warning (initialization): An error occurred while loading `/Users/fullofcaffeine/.emacs.d/
>     init.el':
>     error: Autoloading failed to define function org-babel-do-load-languages
>     To ensure normal operation, you should investigate and remove the
>     cause of the error in your initialization file.  Start Emacs with
>     the `--debug-init' option to view a complete error backtrace.
> 
> When I try to "make autoloads" I get the following:
> 
>     org git:(master): make autoloads
>     ======================================================
>     = Invoke "make help" for a synopsis of make targets. =
>     = Created a default local.mk template.               =
>     = Setting "oldorg" as the default target.            =
>     = Please adapt local.mk to your local setup!         =
>     ======================================================
>     End of file during parsing
>     make: [local.mk] Error 255 (ignored)
>     make -C lisp autoloads
>     rm -f org-version.el org-loaddefs.el org-version.elc org-loaddefs.elc org-install.elc
>     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     End of file during parsing
>     make[1]: *** [org-version.el] Error 255
>     make: *** [autoloads] Error 2
> 
> Not sure where to go from here. 
> 

This

>      Start Emacs with
>     the `--debug-init' option to view a complete error backtrace.

would be a start. The "End of file during parsing" probably indicates
a missing paren or some such, possibly in init.el. I presume emacs -q
starts up properly?

Nick

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Cleaning up my org setup, using version from git
  2013-03-22 21:02 ` Nick Dokos
@ 2013-03-22 21:27   ` Marcelo de Moraes Serpa
  2013-03-22 21:35     ` Thomas S. Dye
  0 siblings, 1 reply; 9+ messages in thread
From: Marcelo de Moraes Serpa @ 2013-03-22 21:27 UTC (permalink / raw)
  To: nicholas.dokos; +Cc: Org Mode

[-- Attachment #1: Type: text/plain, Size: 2615 bytes --]

Hi Nick, thank you for the reply.

Happens it was an error specific to the terminal version of emacs (OpenStep
could not be found, by org-mac-protocol). Not loading that file solved the
issue.

It looks like I just need to upgrade from org-remember to org-capture.

However, I'm getting the following message when calling org-version:

Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @ org-loaddefs.el
can not be found!)

What does org-loaddefs do and how could I get org-loaddefs to be loaded?

Thanks!

- Marcelo


On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com> wrote:

> Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
>
>
> > I have org in ~/.emacs.d/vendor/org, and I also added the following
> lines to my init.el:
> >
> > (add-to-list load-path (cons (concat dotfiles-dir "vendor/org/lisp")
>  load-path))
> > (add-to-list load-path (cons (concat dotfiles-dir
> "vendor/org/contrib/lisp")  load-path))
> >
> > But it fails hard when emacs inits:
> >
> >     Warning (initialization): An error occurred while loading
> `/Users/fullofcaffeine/.emacs.d/
> >     init.el':
> >     error: Autoloading failed to define function
> org-babel-do-load-languages
> >     To ensure normal operation, you should investigate and remove the
> >     cause of the error in your initialization file.  Start Emacs with
> >     the `--debug-init' option to view a complete error backtrace.
> >
> > When I try to "make autoloads" I get the following:
> >
> >     org git:(master): make autoloads
> >     ======================================================
> >     = Invoke "make help" for a synopsis of make targets. =
> >     = Created a default local.mk template.               =
> >     = Setting "oldorg" as the default target.            =
> >     = Please adapt local.mk to your local setup!         =
> >     ======================================================
> >     End of file during parsing
> >     make: [local.mk] Error 255 (ignored)
> >     make -C lisp autoloads
> >     rm -f org-version.el org-loaddefs.el org-version.elc
> org-loaddefs.elc org-install.elc
> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >     End of file during parsing
> >     make[1]: *** [org-version.el] Error 255
> >     make: *** [autoloads] Error 2
> >
> > Not sure where to go from here.
> >
>
> This
>
> >      Start Emacs with
> >     the `--debug-init' option to view a complete error backtrace.
>
> would be a start. The "End of file during parsing" probably indicates
> a missing paren or some such, possibly in init.el. I presume emacs -q
> starts up properly?
>
> Nick
>
>

[-- Attachment #2: Type: text/html, Size: 3705 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Cleaning up my org setup, using version from git
  2013-03-22 21:27   ` Marcelo de Moraes Serpa
@ 2013-03-22 21:35     ` Thomas S. Dye
  2013-03-22 21:54       ` Marcelo de Moraes Serpa
  0 siblings, 1 reply; 9+ messages in thread
From: Thomas S. Dye @ 2013-03-22 21:35 UTC (permalink / raw)
  To: Marcelo de Moraes Serpa; +Cc: nicholas.dokos, Org Mode

Aloha Marcelo,

Marcelo de Moraes Serpa <celoserpa@gmail.com> writes:

> Hi Nick, thank you for the reply.
>
> Happens it was an error specific to the terminal version of emacs (OpenStep
> could not be found, by org-mac-protocol). Not loading that file solved the
> issue.
>
> It looks like I just need to upgrade from org-remember to org-capture.
>
> However, I'm getting the following message when calling org-version:
>
> Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @ org-loaddefs.el
> can not be found!)
>
> What does org-loaddefs do and how could I get org-loaddefs to be loaded?

Did you `make autoloads'?

Tom

>
> Thanks!
>
> - Marcelo
>
>
> On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com> wrote:
>
>> Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
>>
>>
>> > I have org in ~/.emacs.d/vendor/org, and I also added the following
>> lines to my init.el:
>> >
>> > (add-to-list load-path (cons (concat dotfiles-dir "vendor/org/lisp")
>>  load-path))
>> > (add-to-list load-path (cons (concat dotfiles-dir
>> "vendor/org/contrib/lisp")  load-path))
>> >
>> > But it fails hard when emacs inits:
>> >
>> >     Warning (initialization): An error occurred while loading
>> `/Users/fullofcaffeine/.emacs.d/
>> >     init.el':
>> >     error: Autoloading failed to define function
>> org-babel-do-load-languages
>> >     To ensure normal operation, you should investigate and remove the
>> >     cause of the error in your initialization file.  Start Emacs with
>> >     the `--debug-init' option to view a complete error backtrace.
>> >
>> > When I try to "make autoloads" I get the following:
>> >
>> >     org git:(master): make autoloads
>> >     ======================================================
>> >     = Invoke "make help" for a synopsis of make targets. =
>> >     = Created a default local.mk template.               =
>> >     = Setting "oldorg" as the default target.            =
>> >     = Please adapt local.mk to your local setup!         =
>> >     ======================================================
>> >     End of file during parsing
>> >     make: [local.mk] Error 255 (ignored)
>> >     make -C lisp autoloads
>> >     rm -f org-version.el org-loaddefs.el org-version.elc
>> org-loaddefs.elc org-install.elc
>> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> >     End of file during parsing
>> >     make[1]: *** [org-version.el] Error 255
>> >     make: *** [autoloads] Error 2
>> >
>> > Not sure where to go from here.
>> >
>>
>> This
>>
>> >      Start Emacs with
>> >     the `--debug-init' option to view a complete error backtrace.
>>
>> would be a start. The "End of file during parsing" probably indicates
>> a missing paren or some such, possibly in init.el. I presume emacs -q
>> starts up properly?
>>
>> Nick
>>
>>
> Hi Nick, thank you for the reply.
>
>
> Happens it was an error specific to the terminal version of emacs
> (OpenStep could not be found, by org-mac-protocol). Not loading that
> file solved the issue.
>
> It looks like I just need to upgrade from org-remember to org-capture.
>
> However, I'm getting the following message when calling org-version:
>
> Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> org-loaddefs.el can not be found!)
>
> What does org-loaddefs do and how could I get org-loaddefs to be
> loaded?
>
> Thanks!
>
> - Marcelo
>  
>
> On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com>
> wrote:
>
>     
>     Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
>     
>     
>     > I have org in ~/.emacs.d/vendor/org, and I also added the
>     following lines to my init.el:
>     >
>     > (add-to-list load-path (cons (concat dotfiles-dir
>     "vendor/org/lisp")  load-path))
>     > (add-to-list load-path (cons (concat dotfiles-dir
>     "vendor/org/contrib/lisp")  load-path))
>     >
>     > But it fails hard when emacs inits:
>     >
>     >     Warning (initialization): An error occurred while loading
>     `/Users/fullofcaffeine/.emacs.d/
>     >     init.el':
>     >     error: Autoloading failed to define function
>     org-babel-do-load-languages
>     >     To ensure normal operation, you should investigate and
>     remove the
>     >     cause of the error in your initialization file.  Start Emacs
>     with
>     >     the `--debug-init' option to view a complete error
>     backtrace.
>     >
>     > When I try to "make autoloads" I get the following:
>     >
>     >     org git:(master): make autoloads
>     >     ======================================================
>     >     = Invoke "make help" for a synopsis of make targets. =
>     >     = Created a default local.mk template.               =
>     >     = Setting "oldorg" as the default target.            =
>     >     = Please adapt local.mk to your local setup!         =
>     >     ======================================================
>     >     End of file during parsing
>     >     make: [local.mk] Error 255 (ignored)
>     >     make -C lisp autoloads
>     >     rm -f org-version.el org-loaddefs.el org-version.elc
>     org-loaddefs.elc org-install.elc
>     >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     >     End of file during parsing
>     >     make[1]: *** [org-version.el] Error 255
>     >     make: *** [autoloads] Error 2
>     >
>     > Not sure where to go from here. 
>     >
>     
>     
>     This
>     
>     
>     >      Start Emacs with
>     >     the `--debug-init' option to view a complete error
>     backtrace.
>     
>     
>     would be a start. The "End of file during parsing" probably
>     indicates
>     a missing paren or some such, possibly in init.el. I presume emacs
>     -q
>     starts up properly?
>     
>     Nick
>     
>     
>

-- 
Thomas S. Dye
http://www.tsdye.com

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Cleaning up my org setup, using version from git
  2013-03-22 21:35     ` Thomas S. Dye
@ 2013-03-22 21:54       ` Marcelo de Moraes Serpa
  2013-03-22 22:19         ` Thomas S. Dye
  2013-03-22 22:27         ` Nick Dokos
  0 siblings, 2 replies; 9+ messages in thread
From: Marcelo de Moraes Serpa @ 2013-03-22 21:54 UTC (permalink / raw)
  To: Thomas S. Dye; +Cc: nicholas.dokos, Org Mode

[-- Attachment #1: Type: text/plain, Size: 6912 bytes --]

Yes,


> org git:(master): make autoloads
> ======================================================
> = Invoke "make help" for a synopsis of make targets. =
> = Created a default local.mk template.               =
> = Setting "oldorg" as the default target.            =
> = Please adapt local.mk to your local setup!         =
> ======================================================
> End of file during parsing
> make: [local.mk] Error 255 (ignored)
> make -C lisp autoloads
> rm -f org-version.el org-loaddefs.el org-version.elc org-loaddefs.elc
> org-install.elc
> org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> End of file during parsing
> make[1]: *** [org-version.el] Error 255
> make: *** [autoloads] Error 2





On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote:

> Aloha Marcelo,
>
> Marcelo de Moraes Serpa <celoserpa@gmail.com> writes:
>
> > Hi Nick, thank you for the reply.
> >
> > Happens it was an error specific to the terminal version of emacs
> (OpenStep
> > could not be found, by org-mac-protocol). Not loading that file solved
> the
> > issue.
> >
> > It looks like I just need to upgrade from org-remember to org-capture.
> >
> > However, I'm getting the following message when calling org-version:
> >
> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> org-loaddefs.el
> > can not be found!)
> >
> > What does org-loaddefs do and how could I get org-loaddefs to be loaded?
>
> Did you `make autoloads'?
>
> Tom
>
> >
> > Thanks!
> >
> > - Marcelo
> >
> >
> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com>
> wrote:
> >
> >> Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
> >>
> >>
> >> > I have org in ~/.emacs.d/vendor/org, and I also added the following
> >> lines to my init.el:
> >> >
> >> > (add-to-list load-path (cons (concat dotfiles-dir "vendor/org/lisp")
> >>  load-path))
> >> > (add-to-list load-path (cons (concat dotfiles-dir
> >> "vendor/org/contrib/lisp")  load-path))
> >> >
> >> > But it fails hard when emacs inits:
> >> >
> >> >     Warning (initialization): An error occurred while loading
> >> `/Users/fullofcaffeine/.emacs.d/
> >> >     init.el':
> >> >     error: Autoloading failed to define function
> >> org-babel-do-load-languages
> >> >     To ensure normal operation, you should investigate and remove the
> >> >     cause of the error in your initialization file.  Start Emacs with
> >> >     the `--debug-init' option to view a complete error backtrace.
> >> >
> >> > When I try to "make autoloads" I get the following:
> >> >
> >> >     org git:(master): make autoloads
> >> >     ======================================================
> >> >     = Invoke "make help" for a synopsis of make targets. =
> >> >     = Created a default local.mk template.               =
> >> >     = Setting "oldorg" as the default target.            =
> >> >     = Please adapt local.mk to your local setup!         =
> >> >     ======================================================
> >> >     End of file during parsing
> >> >     make: [local.mk] Error 255 (ignored)
> >> >     make -C lisp autoloads
> >> >     rm -f org-version.el org-loaddefs.el org-version.elc
> >> org-loaddefs.elc org-install.elc
> >> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >> >     End of file during parsing
> >> >     make[1]: *** [org-version.el] Error 255
> >> >     make: *** [autoloads] Error 2
> >> >
> >> > Not sure where to go from here.
> >> >
> >>
> >> This
> >>
> >> >      Start Emacs with
> >> >     the `--debug-init' option to view a complete error backtrace.
> >>
> >> would be a start. The "End of file during parsing" probably indicates
> >> a missing paren or some such, possibly in init.el. I presume emacs -q
> >> starts up properly?
> >>
> >> Nick
> >>
> >>
> > Hi Nick, thank you for the reply.
> >
> >
> > Happens it was an error specific to the terminal version of emacs
> > (OpenStep could not be found, by org-mac-protocol). Not loading that
> > file solved the issue.
> >
> > It looks like I just need to upgrade from org-remember to org-capture.
> >
> > However, I'm getting the following message when calling org-version:
> >
> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> > org-loaddefs.el can not be found!)
> >
> > What does org-loaddefs do and how could I get org-loaddefs to be
> > loaded?
> >
> > Thanks!
> >
> > - Marcelo
> >
> >
> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com>
> > wrote:
> >
> >
> >     Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
> >
> >
> >     > I have org in ~/.emacs.d/vendor/org, and I also added the
> >     following lines to my init.el:
> >     >
> >     > (add-to-list load-path (cons (concat dotfiles-dir
> >     "vendor/org/lisp")  load-path))
> >     > (add-to-list load-path (cons (concat dotfiles-dir
> >     "vendor/org/contrib/lisp")  load-path))
> >     >
> >     > But it fails hard when emacs inits:
> >     >
> >     >     Warning (initialization): An error occurred while loading
> >     `/Users/fullofcaffeine/.emacs.d/
> >     >     init.el':
> >     >     error: Autoloading failed to define function
> >     org-babel-do-load-languages
> >     >     To ensure normal operation, you should investigate and
> >     remove the
> >     >     cause of the error in your initialization file.  Start Emacs
> >     with
> >     >     the `--debug-init' option to view a complete error
> >     backtrace.
> >     >
> >     > When I try to "make autoloads" I get the following:
> >     >
> >     >     org git:(master): make autoloads
> >     >     ======================================================
> >     >     = Invoke "make help" for a synopsis of make targets. =
> >     >     = Created a default local.mk template.               =
> >     >     = Setting "oldorg" as the default target.            =
> >     >     = Please adapt local.mk to your local setup!         =
> >     >     ======================================================
> >     >     End of file during parsing
> >     >     make: [local.mk] Error 255 (ignored)
> >     >     make -C lisp autoloads
> >     >     rm -f org-version.el org-loaddefs.el org-version.elc
> >     org-loaddefs.elc org-install.elc
> >     >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >     >     End of file during parsing
> >     >     make[1]: *** [org-version.el] Error 255
> >     >     make: *** [autoloads] Error 2
> >     >
> >     > Not sure where to go from here.
> >     >
> >
> >
> >     This
> >
> >
> >     >      Start Emacs with
> >     >     the `--debug-init' option to view a complete error
> >     backtrace.
> >
> >
> >     would be a start. The "End of file during parsing" probably
> >     indicates
> >     a missing paren or some such, possibly in init.el. I presume emacs
> >     -q
> >     starts up properly?
> >
> >     Nick
> >
> >
> >
>
> --
> Thomas S. Dye
> http://www.tsdye.com
>
>

[-- Attachment #2: Type: text/html, Size: 10071 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Cleaning up my org setup, using version from git
  2013-03-22 21:54       ` Marcelo de Moraes Serpa
@ 2013-03-22 22:19         ` Thomas S. Dye
  2013-03-22 22:24           ` Marcelo de Moraes Serpa
  2013-03-22 22:27         ` Nick Dokos
  1 sibling, 1 reply; 9+ messages in thread
From: Thomas S. Dye @ 2013-03-22 22:19 UTC (permalink / raw)
  To: Marcelo de Moraes Serpa; +Cc: nicholas.dokos, Org Mode

Sorry, I didn't read closely.

Tom

Marcelo de Moraes Serpa <celoserpa@gmail.com> writes:

> Yes,
>
>
>> org git:(master): make autoloads
>> ======================================================
>> = Invoke "make help" for a synopsis of make targets. =
>> = Created a default local.mk template.               =
>> = Setting "oldorg" as the default target.            =
>> = Please adapt local.mk to your local setup!         =
>> ======================================================
>> End of file during parsing
>> make: [local.mk] Error 255 (ignored)
>> make -C lisp autoloads
>> rm -f org-version.el org-loaddefs.el org-version.elc org-loaddefs.elc
>> org-install.elc
>> org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> End of file during parsing
>> make[1]: *** [org-version.el] Error 255
>> make: *** [autoloads] Error 2
>
>
>
>
>
> On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>
>> Aloha Marcelo,
>>
>> Marcelo de Moraes Serpa <celoserpa@gmail.com> writes:
>>
>> > Hi Nick, thank you for the reply.
>> >
>> > Happens it was an error specific to the terminal version of emacs
>> (OpenStep
>> > could not be found, by org-mac-protocol). Not loading that file solved
>> the
>> > issue.
>> >
>> > It looks like I just need to upgrade from org-remember to org-capture.
>> >
>> > However, I'm getting the following message when calling org-version:
>> >
>> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>> org-loaddefs.el
>> > can not be found!)
>> >
>> > What does org-loaddefs do and how could I get org-loaddefs to be loaded?
>>
>> Did you `make autoloads'?
>>
>> Tom
>>
>> >
>> > Thanks!
>> >
>> > - Marcelo
>> >
>> >
>> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com>
>> wrote:
>> >
>> >> Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
>> >>
>> >>
>> >> > I have org in ~/.emacs.d/vendor/org, and I also added the following
>> >> lines to my init.el:
>> >> >
>> >> > (add-to-list load-path (cons (concat dotfiles-dir "vendor/org/lisp")
>> >>  load-path))
>> >> > (add-to-list load-path (cons (concat dotfiles-dir
>> >> "vendor/org/contrib/lisp")  load-path))
>> >> >
>> >> > But it fails hard when emacs inits:
>> >> >
>> >> >     Warning (initialization): An error occurred while loading
>> >> `/Users/fullofcaffeine/.emacs.d/
>> >> >     init.el':
>> >> >     error: Autoloading failed to define function
>> >> org-babel-do-load-languages
>> >> >     To ensure normal operation, you should investigate and remove the
>> >> >     cause of the error in your initialization file.  Start Emacs with
>> >> >     the `--debug-init' option to view a complete error backtrace.
>> >> >
>> >> > When I try to "make autoloads" I get the following:
>> >> >
>> >> >     org git:(master): make autoloads
>> >> >     ======================================================
>> >> >     = Invoke "make help" for a synopsis of make targets. =
>> >> >     = Created a default local.mk template.               =
>> >> >     = Setting "oldorg" as the default target.            =
>> >> >     = Please adapt local.mk to your local setup!         =
>> >> >     ======================================================
>> >> >     End of file during parsing
>> >> >     make: [local.mk] Error 255 (ignored)
>> >> >     make -C lisp autoloads
>> >> >     rm -f org-version.el org-loaddefs.el org-version.elc
>> >> org-loaddefs.elc org-install.elc
>> >> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> >> >     End of file during parsing
>> >> >     make[1]: *** [org-version.el] Error 255
>> >> >     make: *** [autoloads] Error 2
>> >> >
>> >> > Not sure where to go from here.
>> >> >
>> >>
>> >> This
>> >>
>> >> >      Start Emacs with
>> >> >     the `--debug-init' option to view a complete error backtrace.
>> >>
>> >> would be a start. The "End of file during parsing" probably indicates
>> >> a missing paren or some such, possibly in init.el. I presume emacs -q
>> >> starts up properly?
>> >>
>> >> Nick
>> >>
>> >>
>> > Hi Nick, thank you for the reply.
>> >
>> >
>> > Happens it was an error specific to the terminal version of emacs
>> > (OpenStep could not be found, by org-mac-protocol). Not loading that
>> > file solved the issue.
>> >
>> > It looks like I just need to upgrade from org-remember to org-capture.
>> >
>> > However, I'm getting the following message when calling org-version:
>> >
>> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>> > org-loaddefs.el can not be found!)
>> >
>> > What does org-loaddefs do and how could I get org-loaddefs to be
>> > loaded?
>> >
>> > Thanks!
>> >
>> > - Marcelo
>> >
>> >
>> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com>
>> > wrote:
>> >
>> >
>> >     Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
>> >
>> >
>> >     > I have org in ~/.emacs.d/vendor/org, and I also added the
>> >     following lines to my init.el:
>> >     >
>> >     > (add-to-list load-path (cons (concat dotfiles-dir
>> >     "vendor/org/lisp")  load-path))
>> >     > (add-to-list load-path (cons (concat dotfiles-dir
>> >     "vendor/org/contrib/lisp")  load-path))
>> >     >
>> >     > But it fails hard when emacs inits:
>> >     >
>> >     >     Warning (initialization): An error occurred while loading
>> >     `/Users/fullofcaffeine/.emacs.d/
>> >     >     init.el':
>> >     >     error: Autoloading failed to define function
>> >     org-babel-do-load-languages
>> >     >     To ensure normal operation, you should investigate and
>> >     remove the
>> >     >     cause of the error in your initialization file.  Start Emacs
>> >     with
>> >     >     the `--debug-init' option to view a complete error
>> >     backtrace.
>> >     >
>> >     > When I try to "make autoloads" I get the following:
>> >     >
>> >     >     org git:(master): make autoloads
>> >     >     ======================================================
>> >     >     = Invoke "make help" for a synopsis of make targets. =
>> >     >     = Created a default local.mk template.               =
>> >     >     = Setting "oldorg" as the default target.            =
>> >     >     = Please adapt local.mk to your local setup!         =
>> >     >     ======================================================
>> >     >     End of file during parsing
>> >     >     make: [local.mk] Error 255 (ignored)
>> >     >     make -C lisp autoloads
>> >     >     rm -f org-version.el org-loaddefs.el org-version.elc
>> >     org-loaddefs.elc org-install.elc
>> >     >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> >     >     End of file during parsing
>> >     >     make[1]: *** [org-version.el] Error 255
>> >     >     make: *** [autoloads] Error 2
>> >     >
>> >     > Not sure where to go from here.
>> >     >
>> >
>> >
>> >     This
>> >
>> >
>> >     >      Start Emacs with
>> >     >     the `--debug-init' option to view a complete error
>> >     backtrace.
>> >
>> >
>> >     would be a start. The "End of file during parsing" probably
>> >     indicates
>> >     a missing paren or some such, possibly in init.el. I presume emacs
>> >     -q
>> >     starts up properly?
>> >
>> >     Nick
>> >
>> >
>> >
>>
>> --
>> Thomas S. Dye
>> http://www.tsdye.com
>>
>>
> Yes,
>
>
>
>     org git:(master): make autoloads
>     ======================================================
>     = Invoke "make help" for a synopsis of make targets. =
>     = Created a default local.mk template.               =
>     = Setting "oldorg" as the default target.            =
>     = Please adapt local.mk to your local setup!         =
>     ======================================================
>     End of file during parsing
>     make: [local.mk] Error 255 (ignored)
>     make -C lisp autoloads
>     rm -f org-version.el org-loaddefs.el org-version.elc
>     org-loaddefs.elc org-install.elc
>     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     End of file during parsing
>     make[1]: *** [org-version.el] Error 255
>     make: *** [autoloads] Error 2
>
>
>
>
>
> On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
>
>     Aloha Marcelo,
>     
>     
>     Marcelo de Moraes Serpa <celoserpa@gmail.com> writes:
>     
>     > Hi Nick, thank you for the reply.
>     >
>     > Happens it was an error specific to the terminal version of
>     emacs (OpenStep
>     > could not be found, by org-mac-protocol). Not loading that file
>     solved the
>     > issue.
>     >
>     > It looks like I just need to upgrade from org-remember to
>     org-capture.
>     >
>     > However, I'm getting the following message when calling
>     org-version:
>     >
>     > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>     org-loaddefs.el
>     > can not be found!)
>     >
>     > What does org-loaddefs do and how could I get org-loaddefs to be
>     loaded?
>     
>     
>     Did you `make autoloads'?
>     
>     Tom
>     
>     
>     
>     >
>     > Thanks!
>     >
>     > - Marcelo
>     >
>     >
>     > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos
>     <nicholas.dokos@hp.com> wrote:
>     >
>     >> Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
>     >>
>     >>
>     >> > I have org in ~/.emacs.d/vendor/org, and I also added the
>     following
>     >> lines to my init.el:
>     >> >
>     >> > (add-to-list load-path (cons (concat dotfiles-dir
>     "vendor/org/lisp")
>     >>  load-path))
>     >> > (add-to-list load-path (cons (concat dotfiles-dir
>     >> "vendor/org/contrib/lisp")  load-path))
>     >> >
>     >> > But it fails hard when emacs inits:
>     >> >
>     >> >     Warning (initialization): An error occurred while loading
>     >> `/Users/fullofcaffeine/.emacs.d/
>     >> >     init.el':
>     >> >     error: Autoloading failed to define function
>     >> org-babel-do-load-languages
>     >> >     To ensure normal operation, you should investigate and
>     remove the
>     >> >     cause of the error in your initialization file.  Start
>     Emacs with
>     >> >     the `--debug-init' option to view a complete error
>     backtrace.
>     >> >
>     >> > When I try to "make autoloads" I get the following:
>     >> >
>     >> >     org git:(master): make autoloads
>     >> >     ======================================================
>     >> >     = Invoke "make help" for a synopsis of make targets. =
>     >> >     = Created a default local.mk template.               =
>     >> >     = Setting "oldorg" as the default target.            =
>     >> >     = Please adapt local.mk to your local setup!         =
>     >> >     ======================================================
>     >> >     End of file during parsing
>     >> >     make: [local.mk] Error 255 (ignored)
>     >> >     make -C lisp autoloads
>     >> >     rm -f org-version.el org-loaddefs.el org-version.elc
>     >> org-loaddefs.elc org-install.elc
>     >> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     >> >     End of file during parsing
>     >> >     make[1]: *** [org-version.el] Error 255
>     >> >     make: *** [autoloads] Error 2
>     >> >
>     >> > Not sure where to go from here.
>     >> >
>     >>
>     >> This
>     >>
>     >> >      Start Emacs with
>     >> >     the `--debug-init' option to view a complete error
>     backtrace.
>     >>
>     >> would be a start. The "End of file during parsing" probably
>     indicates
>     >> a missing paren or some such, possibly in init.el. I presume
>     emacs -q
>     >> starts up properly?
>     >>
>     >> Nick
>     >>
>     >>
>     > Hi Nick, thank you for the reply.
>     >
>     >
>     > Happens it was an error specific to the terminal version of
>     emacs
>     > (OpenStep could not be found, by org-mac-protocol). Not loading
>     that
>     > file solved the issue.
>     >
>     > It looks like I just need to upgrade from org-remember to
>     org-capture.
>     >
>     > However, I'm getting the following message when calling
>     org-version:
>     >
>     > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>     > org-loaddefs.el can not be found!)
>     >
>     > What does org-loaddefs do and how could I get org-loaddefs to be
>     > loaded?
>     >
>     > Thanks!
>     >
>     > - Marcelo
>     >  
>     >
>     > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos
>     <nicholas.dokos@hp.com>
>     > wrote:
>     >
>     >
>     >     Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
>     >
>     >
>     >     > I have org in ~/.emacs.d/vendor/org, and I also added the
>     >     following lines to my init.el:
>     >     >
>     >     > (add-to-list load-path (cons (concat dotfiles-dir
>     >     "vendor/org/lisp")  load-path))
>     >     > (add-to-list load-path (cons (concat dotfiles-dir
>     >     "vendor/org/contrib/lisp")  load-path))
>     >     >
>     >     > But it fails hard when emacs inits:
>     >     >
>     >     >     Warning (initialization): An error occurred while
>     loading
>     >     `/Users/fullofcaffeine/.emacs.d/
>     >     >     init.el':
>     >     >     error: Autoloading failed to define function
>     >     org-babel-do-load-languages
>     >     >     To ensure normal operation, you should investigate and
>     >     remove the
>     >     >     cause of the error in your initialization file.  Start
>     Emacs
>     >     with
>     >     >     the `--debug-init' option to view a complete error
>     >     backtrace.
>     >     >
>     >     > When I try to "make autoloads" I get the following:
>     >     >
>     >     >     org git:(master): make autoloads
>     >     >     ======================================================
>     >     >     = Invoke "make help" for a synopsis of make targets. =
>     >     >     = Created a default local.mk template.               =
>     >     >     = Setting "oldorg" as the default target.            =
>     >     >     = Please adapt local.mk to your local setup!         =
>     >     >     ======================================================
>     >     >     End of file during parsing
>     >     >     make: [local.mk] Error 255 (ignored)
>     >     >     make -C lisp autoloads
>     >     >     rm -f org-version.el org-loaddefs.el org-version.elc
>     >     org-loaddefs.elc org-install.elc
>     >     >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     >     >     End of file during parsing
>     >     >     make[1]: *** [org-version.el] Error 255
>     >     >     make: *** [autoloads] Error 2
>     >     >
>     >     > Not sure where to go from here. 
>     >     >
>     >
>     >
>     >     This
>     >
>     >
>     >     >      Start Emacs with
>     >     >     the `--debug-init' option to view a complete error
>     >     backtrace.
>     >
>     >
>     >     would be a start. The "End of file during parsing" probably
>     >     indicates
>     >     a missing paren or some such, possibly in init.el. I presume
>     emacs
>     >     -q
>     >     starts up properly?
>     >
>     >     Nick
>     >
>     >
>     >
>     
>     
>     --
>     Thomas S. Dye
>     http://www.tsdye.com
>     
>     
>

-- 
Thomas S. Dye
http://www.tsdye.com

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Cleaning up my org setup, using version from git
  2013-03-22 22:19         ` Thomas S. Dye
@ 2013-03-22 22:24           ` Marcelo de Moraes Serpa
  2013-03-22 22:35             ` Nick Dokos
  0 siblings, 1 reply; 9+ messages in thread
From: Marcelo de Moraes Serpa @ 2013-03-22 22:24 UTC (permalink / raw)
  To: Thomas S. Dye; +Cc: nicholas.dokos, Org Mode

[-- Attachment #1: Type: text/plain, Size: 16272 bytes --]

It seems to work fine so far (apart from org-remember failing, but AFAIK,
it has been deprecated). What are the consequences of not having those
autoloads files?


On Fri, Mar 22, 2013 at 4:19 PM, Thomas S. Dye <tsd@tsdye.com> wrote:

> Sorry, I didn't read closely.
>
> Tom
>
> Marcelo de Moraes Serpa <celoserpa@gmail.com> writes:
>
> > Yes,
> >
> >
> >> org git:(master): make autoloads
> >> ======================================================
> >> = Invoke "make help" for a synopsis of make targets. =
> >> = Created a default local.mk template.               =
> >> = Setting "oldorg" as the default target.            =
> >> = Please adapt local.mk to your local setup!         =
> >> ======================================================
> >> End of file during parsing
> >> make: [local.mk] Error 255 (ignored)
> >> make -C lisp autoloads
> >> rm -f org-version.el org-loaddefs.el org-version.elc org-loaddefs.elc
> >> org-install.elc
> >> org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >> End of file during parsing
> >> make[1]: *** [org-version.el] Error 255
> >> make: *** [autoloads] Error 2
> >
> >
> >
> >
> >
> > On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> >
> >> Aloha Marcelo,
> >>
> >> Marcelo de Moraes Serpa <celoserpa@gmail.com> writes:
> >>
> >> > Hi Nick, thank you for the reply.
> >> >
> >> > Happens it was an error specific to the terminal version of emacs
> >> (OpenStep
> >> > could not be found, by org-mac-protocol). Not loading that file solved
> >> the
> >> > issue.
> >> >
> >> > It looks like I just need to upgrade from org-remember to org-capture.
> >> >
> >> > However, I'm getting the following message when calling org-version:
> >> >
> >> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> >> org-loaddefs.el
> >> > can not be found!)
> >> >
> >> > What does org-loaddefs do and how could I get org-loaddefs to be
> loaded?
> >>
> >> Did you `make autoloads'?
> >>
> >> Tom
> >>
> >> >
> >> > Thanks!
> >> >
> >> > - Marcelo
> >> >
> >> >
> >> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com>
> >> wrote:
> >> >
> >> >> Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
> >> >>
> >> >>
> >> >> > I have org in ~/.emacs.d/vendor/org, and I also added the following
> >> >> lines to my init.el:
> >> >> >
> >> >> > (add-to-list load-path (cons (concat dotfiles-dir
> "vendor/org/lisp")
> >> >>  load-path))
> >> >> > (add-to-list load-path (cons (concat dotfiles-dir
> >> >> "vendor/org/contrib/lisp")  load-path))
> >> >> >
> >> >> > But it fails hard when emacs inits:
> >> >> >
> >> >> >     Warning (initialization): An error occurred while loading
> >> >> `/Users/fullofcaffeine/.emacs.d/
> >> >> >     init.el':
> >> >> >     error: Autoloading failed to define function
> >> >> org-babel-do-load-languages
> >> >> >     To ensure normal operation, you should investigate and remove
> the
> >> >> >     cause of the error in your initialization file.  Start Emacs
> with
> >> >> >     the `--debug-init' option to view a complete error backtrace.
> >> >> >
> >> >> > When I try to "make autoloads" I get the following:
> >> >> >
> >> >> >     org git:(master): make autoloads
> >> >> >     ======================================================
> >> >> >     = Invoke "make help" for a synopsis of make targets. =
> >> >> >     = Created a default local.mk template.               =
> >> >> >     = Setting "oldorg" as the default target.            =
> >> >> >     = Please adapt local.mk to your local setup!         =
> >> >> >     ======================================================
> >> >> >     End of file during parsing
> >> >> >     make: [local.mk] Error 255 (ignored)
> >> >> >     make -C lisp autoloads
> >> >> >     rm -f org-version.el org-loaddefs.el org-version.elc
> >> >> org-loaddefs.elc org-install.elc
> >> >> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >> >> >     End of file during parsing
> >> >> >     make[1]: *** [org-version.el] Error 255
> >> >> >     make: *** [autoloads] Error 2
> >> >> >
> >> >> > Not sure where to go from here.
> >> >> >
> >> >>
> >> >> This
> >> >>
> >> >> >      Start Emacs with
> >> >> >     the `--debug-init' option to view a complete error backtrace.
> >> >>
> >> >> would be a start. The "End of file during parsing" probably indicates
> >> >> a missing paren or some such, possibly in init.el. I presume emacs -q
> >> >> starts up properly?
> >> >>
> >> >> Nick
> >> >>
> >> >>
> >> > Hi Nick, thank you for the reply.
> >> >
> >> >
> >> > Happens it was an error specific to the terminal version of emacs
> >> > (OpenStep could not be found, by org-mac-protocol). Not loading that
> >> > file solved the issue.
> >> >
> >> > It looks like I just need to upgrade from org-remember to org-capture.
> >> >
> >> > However, I'm getting the following message when calling org-version:
> >> >
> >> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> >> > org-loaddefs.el can not be found!)
> >> >
> >> > What does org-loaddefs do and how could I get org-loaddefs to be
> >> > loaded?
> >> >
> >> > Thanks!
> >> >
> >> > - Marcelo
> >> >
> >> >
> >> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <nicholas.dokos@hp.com>
> >> > wrote:
> >> >
> >> >
> >> >     Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
> >> >
> >> >
> >> >     > I have org in ~/.emacs.d/vendor/org, and I also added the
> >> >     following lines to my init.el:
> >> >     >
> >> >     > (add-to-list load-path (cons (concat dotfiles-dir
> >> >     "vendor/org/lisp")  load-path))
> >> >     > (add-to-list load-path (cons (concat dotfiles-dir
> >> >     "vendor/org/contrib/lisp")  load-path))
> >> >     >
> >> >     > But it fails hard when emacs inits:
> >> >     >
> >> >     >     Warning (initialization): An error occurred while loading
> >> >     `/Users/fullofcaffeine/.emacs.d/
> >> >     >     init.el':
> >> >     >     error: Autoloading failed to define function
> >> >     org-babel-do-load-languages
> >> >     >     To ensure normal operation, you should investigate and
> >> >     remove the
> >> >     >     cause of the error in your initialization file.  Start Emacs
> >> >     with
> >> >     >     the `--debug-init' option to view a complete error
> >> >     backtrace.
> >> >     >
> >> >     > When I try to "make autoloads" I get the following:
> >> >     >
> >> >     >     org git:(master): make autoloads
> >> >     >     ======================================================
> >> >     >     = Invoke "make help" for a synopsis of make targets. =
> >> >     >     = Created a default local.mk template.               =
> >> >     >     = Setting "oldorg" as the default target.            =
> >> >     >     = Please adapt local.mk to your local setup!         =
> >> >     >     ======================================================
> >> >     >     End of file during parsing
> >> >     >     make: [local.mk] Error 255 (ignored)
> >> >     >     make -C lisp autoloads
> >> >     >     rm -f org-version.el org-loaddefs.el org-version.elc
> >> >     org-loaddefs.elc org-install.elc
> >> >     >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >> >     >     End of file during parsing
> >> >     >     make[1]: *** [org-version.el] Error 255
> >> >     >     make: *** [autoloads] Error 2
> >> >     >
> >> >     > Not sure where to go from here.
> >> >     >
> >> >
> >> >
> >> >     This
> >> >
> >> >
> >> >     >      Start Emacs with
> >> >     >     the `--debug-init' option to view a complete error
> >> >     backtrace.
> >> >
> >> >
> >> >     would be a start. The "End of file during parsing" probably
> >> >     indicates
> >> >     a missing paren or some such, possibly in init.el. I presume emacs
> >> >     -q
> >> >     starts up properly?
> >> >
> >> >     Nick
> >> >
> >> >
> >> >
> >>
> >> --
> >> Thomas S. Dye
> >> http://www.tsdye.com
> >>
> >>
> > Yes,
> >
> >
> >
> >     org git:(master): make autoloads
> >     ======================================================
> >     = Invoke "make help" for a synopsis of make targets. =
> >     = Created a default local.mk template.               =
> >     = Setting "oldorg" as the default target.            =
> >     = Please adapt local.mk to your local setup!         =
> >     ======================================================
> >     End of file during parsing
> >     make: [local.mk] Error 255 (ignored)
> >     make -C lisp autoloads
> >     rm -f org-version.el org-loaddefs.el org-version.elc
> >     org-loaddefs.elc org-install.elc
> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >     End of file during parsing
> >     make[1]: *** [org-version.el] Error 255
> >     make: *** [autoloads] Error 2
> >
> >
> >
> >
> >
> > On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> >
> >     Aloha Marcelo,
> >
> >
> >     Marcelo de Moraes Serpa <celoserpa@gmail.com> writes:
> >
> >     > Hi Nick, thank you for the reply.
> >     >
> >     > Happens it was an error specific to the terminal version of
> >     emacs (OpenStep
> >     > could not be found, by org-mac-protocol). Not loading that file
> >     solved the
> >     > issue.
> >     >
> >     > It looks like I just need to upgrade from org-remember to
> >     org-capture.
> >     >
> >     > However, I'm getting the following message when calling
> >     org-version:
> >     >
> >     > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> >     org-loaddefs.el
> >     > can not be found!)
> >     >
> >     > What does org-loaddefs do and how could I get org-loaddefs to be
> >     loaded?
> >
> >
> >     Did you `make autoloads'?
> >
> >     Tom
> >
> >
> >
> >     >
> >     > Thanks!
> >     >
> >     > - Marcelo
> >     >
> >     >
> >     > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos
> >     <nicholas.dokos@hp.com> wrote:
> >     >
> >     >> Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
> >     >>
> >     >>
> >     >> > I have org in ~/.emacs.d/vendor/org, and I also added the
> >     following
> >     >> lines to my init.el:
> >     >> >
> >     >> > (add-to-list load-path (cons (concat dotfiles-dir
> >     "vendor/org/lisp")
> >     >>  load-path))
> >     >> > (add-to-list load-path (cons (concat dotfiles-dir
> >     >> "vendor/org/contrib/lisp")  load-path))
> >     >> >
> >     >> > But it fails hard when emacs inits:
> >     >> >
> >     >> >     Warning (initialization): An error occurred while loading
> >     >> `/Users/fullofcaffeine/.emacs.d/
> >     >> >     init.el':
> >     >> >     error: Autoloading failed to define function
> >     >> org-babel-do-load-languages
> >     >> >     To ensure normal operation, you should investigate and
> >     remove the
> >     >> >     cause of the error in your initialization file.  Start
> >     Emacs with
> >     >> >     the `--debug-init' option to view a complete error
> >     backtrace.
> >     >> >
> >     >> > When I try to "make autoloads" I get the following:
> >     >> >
> >     >> >     org git:(master): make autoloads
> >     >> >     ======================================================
> >     >> >     = Invoke "make help" for a synopsis of make targets. =
> >     >> >     = Created a default local.mk template.               =
> >     >> >     = Setting "oldorg" as the default target.            =
> >     >> >     = Please adapt local.mk to your local setup!         =
> >     >> >     ======================================================
> >     >> >     End of file during parsing
> >     >> >     make: [local.mk] Error 255 (ignored)
> >     >> >     make -C lisp autoloads
> >     >> >     rm -f org-version.el org-loaddefs.el org-version.elc
> >     >> org-loaddefs.elc org-install.elc
> >     >> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >     >> >     End of file during parsing
> >     >> >     make[1]: *** [org-version.el] Error 255
> >     >> >     make: *** [autoloads] Error 2
> >     >> >
> >     >> > Not sure where to go from here.
> >     >> >
> >     >>
> >     >> This
> >     >>
> >     >> >      Start Emacs with
> >     >> >     the `--debug-init' option to view a complete error
> >     backtrace.
> >     >>
> >     >> would be a start. The "End of file during parsing" probably
> >     indicates
> >     >> a missing paren or some such, possibly in init.el. I presume
> >     emacs -q
> >     >> starts up properly?
> >     >>
> >     >> Nick
> >     >>
> >     >>
> >     > Hi Nick, thank you for the reply.
> >     >
> >     >
> >     > Happens it was an error specific to the terminal version of
> >     emacs
> >     > (OpenStep could not be found, by org-mac-protocol). Not loading
> >     that
> >     > file solved the issue.
> >     >
> >     > It looks like I just need to upgrade from org-remember to
> >     org-capture.
> >     >
> >     > However, I'm getting the following message when calling
> >     org-version:
> >     >
> >     > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> >     > org-loaddefs.el can not be found!)
> >     >
> >     > What does org-loaddefs do and how could I get org-loaddefs to be
> >     > loaded?
> >     >
> >     > Thanks!
> >     >
> >     > - Marcelo
> >     >
> >     >
> >     > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos
> >     <nicholas.dokos@hp.com>
> >     > wrote:
> >     >
> >     >
> >     >     Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:
> >     >
> >     >
> >     >     > I have org in ~/.emacs.d/vendor/org, and I also added the
> >     >     following lines to my init.el:
> >     >     >
> >     >     > (add-to-list load-path (cons (concat dotfiles-dir
> >     >     "vendor/org/lisp")  load-path))
> >     >     > (add-to-list load-path (cons (concat dotfiles-dir
> >     >     "vendor/org/contrib/lisp")  load-path))
> >     >     >
> >     >     > But it fails hard when emacs inits:
> >     >     >
> >     >     >     Warning (initialization): An error occurred while
> >     loading
> >     >     `/Users/fullofcaffeine/.emacs.d/
> >     >     >     init.el':
> >     >     >     error: Autoloading failed to define function
> >     >     org-babel-do-load-languages
> >     >     >     To ensure normal operation, you should investigate and
> >     >     remove the
> >     >     >     cause of the error in your initialization file.  Start
> >     Emacs
> >     >     with
> >     >     >     the `--debug-init' option to view a complete error
> >     >     backtrace.
> >     >     >
> >     >     > When I try to "make autoloads" I get the following:
> >     >     >
> >     >     >     org git:(master): make autoloads
> >     >     >     ======================================================
> >     >     >     = Invoke "make help" for a synopsis of make targets. =
> >     >     >     = Created a default local.mk template.               =
> >     >     >     = Setting "oldorg" as the default target.            =
> >     >     >     = Please adapt local.mk to your local setup!         =
> >     >     >     ======================================================
> >     >     >     End of file during parsing
> >     >     >     make: [local.mk] Error 255 (ignored)
> >     >     >     make -C lisp autoloads
> >     >     >     rm -f org-version.el org-loaddefs.el org-version.elc
> >     >     org-loaddefs.elc org-install.elc
> >     >     >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >     >     >     End of file during parsing
> >     >     >     make[1]: *** [org-version.el] Error 255
> >     >     >     make: *** [autoloads] Error 2
> >     >     >
> >     >     > Not sure where to go from here.
> >     >     >
> >     >
> >     >
> >     >     This
> >     >
> >     >
> >     >     >      Start Emacs with
> >     >     >     the `--debug-init' option to view a complete error
> >     >     backtrace.
> >     >
> >     >
> >     >     would be a start. The "End of file during parsing" probably
> >     >     indicates
> >     >     a missing paren or some such, possibly in init.el. I presume
> >     emacs
> >     >     -q
> >     >     starts up properly?
> >     >
> >     >     Nick
> >     >
> >     >
> >     >
> >
> >
> >     --
> >     Thomas S. Dye
> >     http://www.tsdye.com
> >
> >
> >
>
> --
> Thomas S. Dye
> http://www.tsdye.com
>

[-- Attachment #2: Type: text/html, Size: 23704 bytes --]

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Cleaning up my org setup, using version from git
  2013-03-22 21:54       ` Marcelo de Moraes Serpa
  2013-03-22 22:19         ` Thomas S. Dye
@ 2013-03-22 22:27         ` Nick Dokos
  1 sibling, 0 replies; 9+ messages in thread
From: Nick Dokos @ 2013-03-22 22:27 UTC (permalink / raw)
  To: Marcelo de Moraes Serpa; +Cc: Org Mode, Thomas S. Dye

Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:

> On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> 
>     Did you `make autoloads'?
> Yes,
> 
>     org git:(master): make autoloads
>     ======================================================
>     = Invoke "make help" for a synopsis of make targets. =
>     = Created a default local.mk template.               =
>     = Setting "oldorg" as the default target.            =
>     = Please adapt local.mk to your local setup!         =
>     ======================================================
>     End of file during parsing
>     make: [local.mk] Error 255 (ignored)
>     make -C lisp autoloads
>     rm -f org-version.el org-loaddefs.el org-version.elc org-loaddefs.elc org-install.elc
>     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     End of file during parsing
>     make[1]: *** [org-version.el] Error 255
>     make: *** [autoloads] Error 2
> 

Well, you issued the command but the make failed. So you need to
investigate why it is failing. `make autoloads' removes some existing
files and then tries to rebuild them. One of those is org-loaddefs.el -
the fact that you don't have it shows that the rebuild failed.

The rebuild is done by this rule in lisp/Makefile:

,----
| autoloads:	cleanauto addcontrib $(LISPI) $(LISPV)
| 
| $(LISPV):	$(LISPF)
| 	@echo "org-version: $(ORGVERSION) ($(GITVERSION))"
| 	@$(RM) $(@)
| 	@$(MAKE_ORG_VERSION)
`----

and MAKE_ORG_VERSION is defined in mk/default.mk:

,----
| # Using emacs in batch mode.
| # BATCH = $(EMACS) -batch -vanilla # XEmacs
| BATCH	= $(EMACS) -batch -Q
|
| # Emacs must be started in lisp directory
| BATCHL	= $(BATCH) \
| 	  --eval '(add-to-list '"'"'load-path ".")'
| 
| # How to generate org-version.el
| MAKE_ORG_VERSION = $(BATCHL) \
| 	  --eval '(load "org-compat.el")' \
| 	  --eval '(load "../mk/org-fixup.el")' \
| 	  --eval '(org-make-org-version "$(ORGVERSION)" "$(GITVERSION)" "$(datadir)")'
`----

But you have a syntax error in some file (End of file during parsing - as I said,
probably a missing paren or some such) that causes emacs to exit abnormally.


Nick

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Cleaning up my org setup, using version from git
  2013-03-22 22:24           ` Marcelo de Moraes Serpa
@ 2013-03-22 22:35             ` Nick Dokos
  0 siblings, 0 replies; 9+ messages in thread
From: Nick Dokos @ 2013-03-22 22:35 UTC (permalink / raw)
  To: Marcelo de Moraes Serpa; +Cc: Org Mode, Thomas S. Dye

Marcelo de Moraes Serpa <celoserpa@gmail.com> wrote:

> It seems to work fine so far (apart from org-remember failing, but
> AFAIK, it has been deprecated).  What are the consequences of not
> having those autoloads files?
> 

Emacs is likely to fail with unexplained and mysterious errors at any moment.

There are land mines where you are treading: some of them are exploding,
and probably more are lurking.  I understand the temptation to just
forge ahead, but you will be much better off if you take the time to fix
the problems now rather than leaving them for later.

Nick

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2013-03-22 22:35 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-22 20:04 Cleaning up my org setup, using version from git Marcelo de Moraes Serpa
2013-03-22 21:02 ` Nick Dokos
2013-03-22 21:27   ` Marcelo de Moraes Serpa
2013-03-22 21:35     ` Thomas S. Dye
2013-03-22 21:54       ` Marcelo de Moraes Serpa
2013-03-22 22:19         ` Thomas S. Dye
2013-03-22 22:24           ` Marcelo de Moraes Serpa
2013-03-22 22:35             ` Nick Dokos
2013-03-22 22:27         ` Nick Dokos

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).