* [New exporter] Should there be an option to kill/exit the dispatcher without using it
@ 2013-02-16 13:45 Charles
2013-02-16 13:51 ` Charles
2013-02-16 14:03 ` Charles
0 siblings, 2 replies; 5+ messages in thread
From: Charles @ 2013-02-16 13:45 UTC (permalink / raw)
To: emacs-orgmode Mode
System Windows 7, 64 bit
Emacs 24.2.1 (i386-mingw-nt6.1.7601) of 2012-08-28 on mRVIN
Org-mode 7.9.3 (7.9.3e-14-g981c6d @ c:/Org/lisp/)
It appears that there is no simple option in the export dispatcher to
either switch to and then kill or simply kill the export dispatcher UI
(or buffer) if you do not want to use it after you call it.
I called up the new dispatcher only for a look-see and no more.
After C-c C-e, the point remained in the original buffer. I then wanted
to kill/exit the dispatcher without using it.
1. I attempted to switch to the dispatcher.
a. C-x exported the original buffer to XOXO. (no chance to enter the
"b" key)
b. M-x produced "Wrong type argument: character, 134217848." There was
no chance to enter "switch buffer" after M-x.
2. Just for fun I entered "q" and it produced "No command associated
with key q."
In all three cases the dispatcher remained open but not visible. I was
then able to switch to the dispatcher and kill it.
Charlie Millar
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [New exporter] Should there be an option to kill/exit the dispatcher without using it
2013-02-16 13:45 [New exporter] Should there be an option to kill/exit the dispatcher without using it Charles
@ 2013-02-16 13:51 ` Charles
2013-02-16 14:03 ` Charles
1 sibling, 0 replies; 5+ messages in thread
From: Charles @ 2013-02-16 13:51 UTC (permalink / raw)
To: emacs-orgmode
My mistake. I forgot about C-g.
Charlie
On 2/16/2013 8:45 AM, Charles wrote:
> System Windows 7, 64 bit
> Emacs 24.2.1 (i386-mingw-nt6.1.7601) of 2012-08-28 on mRVIN
> Org-mode 7.9.3 (7.9.3e-14-g981c6d @ c:/Org/lisp/)
>
> It appears that there is no simple option in the export dispatcher to
> either switch to and then kill or simply kill the export dispatcher UI
> (or buffer) if you do not want to use it after you call it.
>
> I called up the new dispatcher only for a look-see and no more.
>
> After C-c C-e, the point remained in the original buffer. I then wanted
> to kill/exit the dispatcher without using it.
>
> 1. I attempted to switch to the dispatcher.
>
> a. C-x exported the original buffer to XOXO. (no chance to enter
> the "b" key)
>
> b. M-x produced "Wrong type argument: character, 134217848." There
> was no chance to enter "switch buffer" after M-x.
>
> 2. Just for fun I entered "q" and it produced "No command associated
> with key q."
>
> In all three cases the dispatcher remained open but not visible. I was
> then able to switch to the dispatcher and kill it.
>
> Charlie Millar
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2899 / Virus Database: 2639/6103 - Release Date: 02/14/13
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [New exporter] Should there be an option to kill/exit the dispatcher without using it
2013-02-16 13:45 [New exporter] Should there be an option to kill/exit the dispatcher without using it Charles
2013-02-16 13:51 ` Charles
@ 2013-02-16 14:03 ` Charles
2013-02-16 14:09 ` Nicolas Goaziou
1 sibling, 1 reply; 5+ messages in thread
From: Charles @ 2013-02-16 14:03 UTC (permalink / raw)
To: emacs-orgmode
I'm not sure if my immediate follow up was sent to the list.
I forgot about C-g.
Charlie Millar
On 2/16/2013 8:45 AM, Charles wrote:
> System Windows 7, 64 bit
> Emacs 24.2.1 (i386-mingw-nt6.1.7601) of 2012-08-28 on mRVIN
> Org-mode 7.9.3 (7.9.3e-14-g981c6d @ c:/Org/lisp/)
>
> It appears that there is no simple option in the export dispatcher to
> either switch to and then kill or simply kill the export dispatcher UI
> (or buffer) if you do not want to use it after you call it.
>
> I called up the new dispatcher only for a look-see and no more.
>
> After C-c C-e, the point remained in the original buffer. I then wanted
> to kill/exit the dispatcher without using it.
>
> 1. I attempted to switch to the dispatcher.
>
> a. C-x exported the original buffer to XOXO. (no chance to enter
> the "b" key)
>
> b. M-x produced "Wrong type argument: character, 134217848." There
> was no chance to enter "switch buffer" after M-x.
>
> 2. Just for fun I entered "q" and it produced "No command associated
> with key q."
>
> In all three cases the dispatcher remained open but not visible. I was
> then able to switch to the dispatcher and kill it.
>
> Charlie Millar
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.2899 / Virus Database: 2639/6103 - Release Date: 02/14/13
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [New exporter] Should there be an option to kill/exit the dispatcher without using it
2013-02-16 14:03 ` Charles
@ 2013-02-16 14:09 ` Nicolas Goaziou
2013-02-17 2:45 ` Charles
0 siblings, 1 reply; 5+ messages in thread
From: Nicolas Goaziou @ 2013-02-16 14:09 UTC (permalink / raw)
To: Charles; +Cc: emacs-orgmode
Hello,
Charles <millarc@verizon.net> writes:
> I'm not sure if my immediate follow up was sent to the list.
>
> I forgot about C-g.
>
> Charlie Millar
>
> On 2/16/2013 8:45 AM, Charles wrote:
>> System Windows 7, 64 bit
>> Emacs 24.2.1 (i386-mingw-nt6.1.7601) of 2012-08-28 on mRVIN
>> Org-mode 7.9.3 (7.9.3e-14-g981c6d @ c:/Org/lisp/)
>>
>> It appears that there is no simple option in the export dispatcher to
>> either switch to and then kill or simply kill the export dispatcher UI
>> (or buffer) if you do not want to use it after you call it.
>>
>> I called up the new dispatcher only for a look-see and no more.
>>
>> After C-c C-e, the point remained in the original buffer. I then wanted
>> to kill/exit the dispatcher without using it.
>>
>> 1. I attempted to switch to the dispatcher.
>>
>> a. C-x exported the original buffer to XOXO. (no chance to enter
>> the "b" key)
>>
>> b. M-x produced "Wrong type argument: character, 134217848." There
>> was no chance to enter "switch buffer" after M-x.
>>
>> 2. Just for fun I entered "q" and it produced "No command associated
>> with key q."
>>
>> In all three cases the dispatcher remained open but not visible. I was
>> then able to switch to the dispatcher and kill it.
If you see XOXO export, you're not looking at the new exporter
interface.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [New exporter] Should there be an option to kill/exit the dispatcher without using it
2013-02-16 14:09 ` Nicolas Goaziou
@ 2013-02-17 2:45 ` Charles
0 siblings, 0 replies; 5+ messages in thread
From: Charles @ 2013-02-17 2:45 UTC (permalink / raw)
To: emacs-orgmode
Hello, Nicolas,
On 2/16/2013 9:09 AM, Nicolas Goaziou wrote:
> Hello,
>
> Charles <millarc@verizon.net> writes:
>
>> I'm not sure if my immediate follow up was sent to the list.
>>
>> I forgot about C-g.
>>
>> Charlie Millar
>>
>> On 2/16/2013 8:45 AM, Charles wrote:
>>> System Windows 7, 64 bit
>>> Emacs 24.2.1 (i386-mingw-nt6.1.7601) of 2012-08-28 on mRVIN
>>> Org-mode 7.9.3 (7.9.3e-14-g981c6d @ c:/Org/lisp/)
>>>
>>> It appears that there is no simple option in the export dispatcher to
>>> either switch to and then kill or simply kill the export dispatcher UI
>>> (or buffer) if you do not want to use it after you call it.
>>>
>>> I called up the new dispatcher only for a look-see and no more.
>>>
>>> After C-c C-e, the point remained in the original buffer. I then wanted
>>> to kill/exit the dispatcher without using it.
>>>
>>> 1. I attempted to switch to the dispatcher.
>>>
>>> a. C-x exported the original buffer to XOXO. (no chance to enter
>>> the "b" key)
>>>
>>> b. M-x produced "Wrong type argument: character, 134217848." There
>>> was no chance to enter "switch buffer" after M-x.
>>>
>>> 2. Just for fun I entered "q" and it produced "No command associated
>>> with key q."
>>>
>>> In all three cases the dispatcher remained open but not visible. I was
>>> then able to switch to the dispatcher and kill it.
>
> If you see XOXO export, you're not looking at the new exporter
> interface.
>
>
> Regards,
>
You are right. I was not looking at the new exporter. For that matter, I
did not understand how to invoke the new exporter in a Windows 7 set up.
That said, when I do load the new exporter as described in the release
notes 7.9.2 on my system, the "q" key does not show on the dispatcher
ui; however, pressing q does exit the dispatcher.
On my Cygwin setup (same machine) the export dispatcher does show q as
quit or exit. I update the org files in Cygwin using git, usually once
per day. I looked at org/lisp and find that the exporter is now
ox-[name]. Is that correct?
Perhaps when the ox-[name] files become available in the org/lisp in Org
8 this option will appear in a plain Windows set up (if there is such a
thing).
I therefore conclude that someone has already suggested adding the line
"q for quit", that it has been implemented in the bleeding edge and I
over looked any messages to that effect and my research was poorly executed.
Best, Charlie
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-02-17 2:45 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-02-16 13:45 [New exporter] Should there be an option to kill/exit the dispatcher without using it Charles
2013-02-16 13:51 ` Charles
2013-02-16 14:03 ` Charles
2013-02-16 14:09 ` Nicolas Goaziou
2013-02-17 2:45 ` Charles
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).