Publishing org project as odt

Publishing org project as odt

[Wiskey 5 Alpha]

Hello,
    I have a rather large project that I currently export to odt files. 
  I tried the org-export-as-odt-batch command line function but it 
fails, and subsequently deletes all files in the directory.
    What i would *really* like is to publish the directory of org files, 
with a command like =org-publish-org-to-odt=.  Is there a way to do this 
currently ?

-Tim

Re: Publishing org project as odt

[Jambunathan K]

Wiskey 5 Alpha <wiskey5alpha@gmail.com> writes:

> Hello,
>    I have a rather large project that I currently export to odt
> files. I tried the org-export-as-odt-batch command line function but
> it fails, 

Can you tell how it fails. In your init file (the one used by batch
emacs), you can put

    (setq debug-on-error t)

to get a stack trace or some such info.

> and subsequently deletes all files in the directory.

Deletes what files?

>    What i would *really* like is to publish the directory of org
> files, with a command like =org-publish-org-to-odt=.  Is there a way
> to do this currently ?

Currently there is no way to do it.  How is your publishing setup like?

> -Tim
>
>
-- 

Re: Publishing org project as odt

[Wiskey 5 Alpha]

Thank you for your reply.  Below you will find a small example to 
illustrate the problem.  First I have a small test org-mode file in the 
directory, =test.org=.  It's contents is shown next.  I run the batch 
process, which causes an error.   All files in the directory are deleted 
except for the .odt file !

Thanks again.  I am running emacs version 23.4.1 on Ubuntu 12.10, and 
org-mode from elpa package =org-plus-contrib 20121217=

-Tim


aldrichtr@liberty:/tmp/export-process
$ ls
test.org
aldrichtr@liberty:/tmp/export-process
$ cat test.org

* This is heading one
   And some text
** heading one two
    And some text

aldrichtr@liberty:/tmp/export-process
$ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall 
org-export-as-odt-batch
...
Debug (org-odt): Searching for OpenDocument schema files...
Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
Debug (org-odt): No OpenDocument schema files installed
Debug (org-odt): Searching for OpenDocument styles files...
Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
Debug (org-odt): Trying /home/aldrichtr/.emacs.d/elpa/etc/styles/...
Debug (org-odt): Trying 
/home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/...
Debug (org-odt): Using styles under 
/home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/
Exporting to ODT using org-lparse...
Using vacuous schema
[yas] Loading for `nxml-mode', just-in-time: (yas--load-directory-1 
/home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode 
(quote nxml-mode) (quote (text-mode)))!
[yas] Loading compiled snippets from 
/home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
LaTeX to MathML converter not available. Using verbatim instead.
Exporting...
ODT export done, pushed to kill ring and clipboard
Wrote /tmp/export-process/meta.xml
Using vacuous schema
Saving file /tmp/export-process/styles.xml...
Wrote /tmp/export-process/styles.xml
Wrote /tmp/export-process/mimetype
Using vacuous schema
Saving file /tmp/export-process/styles.xml...
Wrote /tmp/export-process/styles.xml
(No changes need to be saved)
Saving file /tmp/export-process/META-INF/manifest.xml...
Wrote /tmp/export-process/META-INF/manifest.xml
Saving file /tmp/export-process/content.xml...
Wrote /tmp/export-process/content.xml
Using vacuous schema
(No changes need to be saved)
Creating odt file...
Running zip -mX0 test.odt mimetype
Running zip -rmTq test.odt .
Debugger entered--Lisp error: (file-already-exists "File already exists" 
"/tmp/export-process/test.odt")
   rename-file("test.odt" "/tmp/export-process/")
   (let* ((target-name ...) (target-dir ...) (cmds ...)) (when 
(file-exists-p target) (delete-file target)) (let (... exitcode 
err-string) (message "Creating odt file...") (mapc ... cmds)) 
(rename-file target-name target-dir))
   (let ((xml-files ...)) (when (equal org-lparse-backend ...) (push 
"styles.xml" xml-files)) (mapc (lambda ... ...) xml-files) (let* (... 
... ...) (when ... ...) (let ... ... ...) (rename-file target-name 
target-dir)))
   org-odt-save-as-outfile("/tmp/export-process/test.odt" 
(:latex-image-options nil :exclude-tags ("noexport") :select-tags 
("export") :publishing-directory nil :timestamp nil :expand-quoted-html 
t :html-table-tag "<table border=\"2\" cellspacing=\"0\" 
cellpadding=\"6\" rules=\"groups\" frame=\"hsides\">" :xml-declaration 
(("html" . "<?xml version=\"1.0\" encoding=\"%s\"?>") ("php" . "<?php 
echo \"<?xml version=\\\"1.0\\\" encoding=\\\"%s\\\" ?>\"; ?>")) 
:html-postamble auto :html-preamble t :html-extension "html" 
:inline-images maybe :convert-org-links t :agenda-style nil :style-extra 
"" :style "" :style-include-scripts t :style-include-default t 
:table-auto-headline t :tables t :time-stamp-file t :creator-info t 
:email-info nil :author-info t :email "wiskey5alpha@gmail.com" ...))
   funcall(org-odt-save-as-outfile "/tmp/export-process/test.odt" 
(:latex-image-options nil :exclude-tags ("noexport") :select-tags 
("export") :publishing-directory nil :timestamp nil :expand-quoted-html 
t :html-table-tag "<table border=\"2\" cellspacing=\"0\" 
cellpadding=\"6\" rules=\"groups\" frame=\"hsides\">" :xml-declaration 
(("html" . "<?xml version=\"1.0\" encoding=\"%s\"?>") ("php" . "<?php 
echo \"<?xml version=\\\"1.0\\\" encoding=\\\"%s\\\" ?>\"; ?>")) 
:html-postamble auto :html-preamble t :html-extension "html" 
:inline-images maybe :convert-org-links t :agenda-style nil :style-extra 
"" :style "" :style-include-scripts t :style-include-default t 
:table-auto-headline t :tables t :time-stamp-file t :creator-info t 
:email-info nil :author-info t :email "wiskey5alpha@gmail.com" ...))
   (and f (functionp f) (funcall f filename opt-plist))
   (or (and f (functionp f) (funcall f filename opt-plist)) (save-buffer))
   (let ((f ...)) (or (and f ... ...) (save-buffer)))
   (cond ((not to-buffer) (let ... ...) (or ... ...)) ((eq to-buffer 
...) (prog1 ... ...)) (t (current-buffer)))
   (let ((case-fold-search nil) (org-odd-levels-only odd)) (mapc (lambda 
... ...) org-export-plist-vars) (setq umax (if arg ... 
org-export-headline-levels)) (setq umax-toc (if ... ... umax)) (setq 
org-lparse-opt-plist (plist-put org-lparse-opt-plist :headline-levels 
umax)) (when (and org-export-with-toc ...) (setq lines ...)) (unless 
body-only (org-lparse-begin ... opt-plist) (org-lparse-begin ... 
opt-plist)) (setq head-count 0) (org-init-section-numbers) 
(org-lparse-begin-paragraph) (while (setq line ... origline line) (catch 
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...)) (when 
(org-lparse-current-environment-p ...) (org-lparse-end-environment ...)) 
(org-lparse-end-level 1 umax) (when (and ... 
org-lparse-dyn-first-heading-pos) 
(org-lparse-end-outline-text-or-outline)) (org-lparse-end (quote 
DOCUMENT-BODY) opt-plist) (unless body-only (org-lparse-end ...)) 
(org-lparse-end (quote EXPORT)) (when org-lparse-collect-buffer 
(kill-buffer org-lparse-collect-buffer)) (goto-char (point-min)) (or 
(org-export-push-to-kill-ring ...) (message "Exporting... done")) (cond 
(... ... ...) (... ...) (t ...)))
   (let* (hfy-user-sheet-assoc org-lparse-encode-pending 
org-lparse-par-open (org-lparse-par-open-stashed 0) 
(org-lparse-list-stack ...) org-lparse-list-table-p 
org-lparse-list-table:table-cell-open org-lparse-list-table:table-row 
org-lparse-list-table:lines org-lparse-outline-text-open 
(org-lparse-latex-fragment-fallback ...) 
(org-lparse-insert-tag-with-newlines ...) (org-lparse-to-buffer 
to-buffer) (org-lparse-body-only body-only) 
(org-lparse-entity-control-callbacks-alist ...) 
(org-lparse-entity-format-callbacks-alist ...) (opt-plist ...) 
(body-only ...) valid org-lparse-dyn-first-heading-pos (odd 
org-odd-levels-only) (region-p ...) (rbeg ...) (rend ...) (subtree-p 
...) (level-offset ...) (opt-plist ...) (org-current-export-dir ...) 
(org-current-export-file buffer-file-name) (level 0) (line "") (origline 
"") txt todo (umax nil) (umax-toc nil) (filename ...) (current-dir ...) 
(auto-insert nil) (buffer ...) (org-levels-open ...) (dummy ...) (date 
...) (date ...) (dummy ...) (title ...) (dummy ...) (html-table-tag ...) 
(quote-re0 ...) (quote-re ...) ...) (let (...) (org-unmodified ...)) 
(message "Exporting...") (org-init-section-numbers) (setq 
org-lparse-output-buffer buffer) (set-buffer org-lparse-output-buffer) 
(let (...) (erase-buffer)) (fundamental-mode) (org-install-letbind) (and 
(fboundp ...) (set-buffer-file-coding-system coding-system-for-write)) 
(let (... ...) (mapc ... org-export-plist-vars) (setq umax ...) (setq 
umax-toc ...) (setq org-lparse-opt-plist ...) (when ... ...) (unless 
body-only ... ...) (setq head-count 0) (org-init-section-numbers) 
(org-lparse-begin-paragraph) (while ... ...) (when ... ...) 
(org-lparse-end-level 1 umax) (when ... ...) (org-lparse-end ... 
opt-plist) (unless body-only ...) (org-lparse-end ...) (when 
org-lparse-collect-buffer ...) (goto-char ...) (or ... ...) (cond ... 
... ...)))
   org-do-lparse(3 hidden nil nil nil nil)
   (prog1 (org-do-lparse arg hidden ext-plist to-buffer body-only 
pub-dir) (remove-hook (quote org-export-preprocess-hook) (quote 
org-lparse-strip-experimental-blocks-maybe)) (remove-hook (quote 
org-export-preprocess-after-blockquote-hook) (quote 
org-lparse-preprocess-after-blockquote)))
   (let* ((org-lparse-backend ...) (org-lparse-other-backend ...)) 
(add-hook (quote org-export-preprocess-hook) (quote 
org-lparse-strip-experimental-blocks-maybe)) (add-hook (quote 
org-export-preprocess-after-blockquote-hook) (quote 
org-lparse-preprocess-after-blockquote)) (unless 
(org-lparse-backend-is-native-p native-backend) (error "Don't know how 
to export natively to backend %s" native-backend)) (unless (or ... ...) 
(error "Don't know how to export to backend %s %s" target-backend ...)) 
(run-hooks (quote org-export-first-hook)) (prog1 (org-do-lparse arg 
hidden ext-plist to-buffer body-only pub-dir) (remove-hook ... ...) 
(remove-hook ... ...)))
   org-lparse("odt" "odt" 3 hidden)
   org-lparse-batch("odt")
   org-export-as-odt-batch()
   command-line-1(("--load=/home/aldrichtr/.emacs" "--visit=./test.org" 
"--funcall" "org-export-as-odt-batch"))
   command-line()
   normal-top-level()

aldrichtr@liberty:/tmp/export-process
$ ls
test.odt
aldrichtr@liberty:/tmp/export-process
$

Re: Publishing org project as odt

[Wiskey 5 Alpha]

On 12/22/2012 07:54 AM, Jambunathan K wrote:
> Wiskey 5 Alpha <wiskey5alpha@gmail.com> writes:
>>     What i would *really* like is to publish the directory of org
>> files, with a command like =org-publish-org-to-odt=.  Is there a way
>> to do this currently ?
>
> Currently there is no way to do it.  How is your publishing setup like?
Well, I have several org-mode files in a directory.  These are the 
/source/ files.  For each file, I open it in emacs, then =C-c C-e o= for 
each one.  Next, I move all of the .odt's to a /build/ directory.  Here 
I do any final adjustments to the odt file, and then create a 
presentation from the outline, (file->send->outline to presentation in 
libreoffice).  I save this in the build directory.  Finally I make any 
final adjustments to the presentation.

All of this is a painfully manual process, and I am looking to do it all 
in a make/shell script.   I considered using the publish facility 
because that would basically do exactly what I just described.  The only 
problem is that publish can create an html or pdf file, but not an 
odt... right ?

-Tim

Re: Publishing org project as odt

[Wiskey 5 Alpha]

On 12/22/2012 07:54 AM, Jambunathan K wrote:
> Wiskey 5 Alpha <wiskey5alpha@gmail.com> writes:
>
>> Hello,
>>     I have a rather large project that I currently export to odt
>> files. I tried the org-export-as-odt-batch command line function but
>> it fails,
>
> Can you tell how it fails. In your init file (the one used by batch
> emacs), you can put
>
>      (setq debug-on-error t)
>
> to get a stack trace or some such info.
>
>> and subsequently deletes all files in the directory.
>
> Deletes what files?
I guess technically , it doesn't delete them, but they are zipped into 
the .odt file, and not present in the directory...

org-odt: Batch exports creates data loss, deletes original org file

[Jambunathan K]

> Thank you for your reply.  Below you will find a small example to
> illustrate the problem.  First I have a small test org-mode file in
> the directory, =test.org=.  It's contents is shown next.  I run the
> batch process, which causes an error.   All files in the directory are
> deleted except for the .odt file !

Data loss is very bad.  I am sorry.  Looks like you hope you had
backups.

I will forward a fix to Org/Emacs in few hours.

> $ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall
> org-export-as-odt-batch

Meanwhile, instead of using `org-export-as-odt-batch', you can try the
following which uses `org-export-as-odt'.

$ emacs --batch -Q -L ~/src/org-mode/lisp --visit=./test-new.org --funcall
org-export-as-odt


> Thanks again.  I am running emacs version 23.4.1 on Ubuntu 12.10, and
> org-mode from elpa package =org-plus-contrib 20121217=
>
> -Tim
>
>
> aldrichtr@liberty:/tmp/export-process
> $ ls
> test.org
> aldrichtr@liberty:/tmp/export-process
> $ cat test.org
>
> * This is heading one
>   And some text
> ** heading one two
>    And some text
>
> aldrichtr@liberty:/tmp/export-process
> $ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall
> org-export-as-odt-batch
> ...
> Debug (org-odt): Searching for OpenDocument schema files...
> Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
> Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
> Debug (org-odt): No OpenDocument schema files installed
> Debug (org-odt): Searching for OpenDocument styles files...
> Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
> Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
> Debug (org-odt): Trying /home/aldrichtr/.emacs.d/elpa/etc/styles/...
> Debug (org-odt): Trying
> /home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/...
> Debug (org-odt): Using styles under
> /home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/
> Exporting to ODT using org-lparse...
> Using vacuous schema
> [yas] Loading for `nxml-mode', just-in-time: (yas--load-directory-1 
> /home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
> (quote nxml-mode) (quote (text-mode)))!
> [yas] Loading compiled snippets from
> /home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
> LaTeX to MathML converter not available. Using verbatim instead.
> Exporting...
> ODT export done, pushed to kill ring and clipboard
> Wrote /tmp/export-process/meta.xml
> Using vacuous schema
> Saving file /tmp/export-process/styles.xml...
> Wrote /tmp/export-process/styles.xml
> Wrote /tmp/export-process/mimetype
> Using vacuous schema
> Saving file /tmp/export-process/styles.xml...
> Wrote /tmp/export-process/styles.xml
> (No changes need to be saved)
> Saving file /tmp/export-process/META-INF/manifest.xml...
> Wrote /tmp/export-process/META-INF/manifest.xml
> Saving file /tmp/export-process/content.xml...
> Wrote /tmp/export-process/content.xml
> Using vacuous schema
> (No changes need to be saved)
> Creating odt file...
> Running zip -mX0 test.odt mimetype
> Running zip -rmTq test.odt .
> Debugger entered--Lisp error: (file-already-exists "File already
> exists" "/tmp/export-process/test.odt")
>   rename-file("test.odt" "/tmp/export-process/")
>   (let* ((target-name ...) (target-dir ...) (cmds ...)) (when
> (file-exists-p target) (delete-file target)) (let (... exitcode
> err-string) (message "Creating odt file...") (mapc ... cmds))
> (rename-file target-name target-dir))
>   (let ((xml-files ...)) (when (equal org-lparse-backend ...) (push
> "styles.xml" xml-files)) (mapc (lambda ... ...) xml-files) (let*
> (... ... ...) (when ... ...) (let ... ... ...) (rename-file
> target-name target-dir)))
>   org-odt-save-as-outfile("/tmp/export-process/test.odt"
> (:latex-image-options nil :exclude-tags ("noexport") :select-tags
> ("export") :publishing-directory nil :timestamp nil
> :expand-quoted-html t :html-table-tag "<table border=\"2\"
> cellspacing=\"0\" cellpadding=\"6\" rules=\"groups\"
> frame=\"hsides\">" :xml-declaration (("html" . "<?xml version=\"1.0\"
> encoding=\"%s\"?>") ("php" . "<?php echo \"<?xml version=\\\"1.0\\\"
> encoding=\\\"%s\\\" ?>\"; ?>")) :html-postamble auto :html-preamble t
> :html-extension "html" :inline-images maybe :convert-org-links t
> :agenda-style nil :style-extra "" :style "" :style-include-scripts t
> :style-include-default t :table-auto-headline t :tables t
> :time-stamp-file t :creator-info t :email-info nil :author-info t
> :email "wiskey5alpha@gmail.com" ...))
>   funcall(org-odt-save-as-outfile "/tmp/export-process/test.odt"
> (:latex-image-options nil :exclude-tags ("noexport") :select-tags
> ("export") :publishing-directory nil :timestamp nil
> :expand-quoted-html t :html-table-tag "<table border=\"2\"
> cellspacing=\"0\" cellpadding=\"6\" rules=\"groups\"
> frame=\"hsides\">" :xml-declaration (("html" . "<?xml version=\"1.0\"
> encoding=\"%s\"?>") ("php" . "<?php echo \"<?xml version=\\\"1.0\\\"
> encoding=\\\"%s\\\" ?>\"; ?>")) :html-postamble auto :html-preamble t
> :html-extension "html" :inline-images maybe :convert-org-links t
> :agenda-style nil :style-extra "" :style "" :style-include-scripts t
> :style-include-default t :table-auto-headline t :tables t
> :time-stamp-file t :creator-info t :email-info nil :author-info t
> :email "wiskey5alpha@gmail.com" ...))
>   (and f (functionp f) (funcall f filename opt-plist))
>   (or (and f (functionp f) (funcall f filename opt-plist)) (save-buffer))
>   (let ((f ...)) (or (and f ... ...) (save-buffer)))
>   (cond ((not to-buffer) (let ... ...) (or ... ...)) ((eq to-buffer
> ...) (prog1 ... ...)) (t (current-buffer)))
>   (let ((case-fold-search nil) (org-odd-levels-only odd)) (mapc
> (lambda ... ...) org-export-plist-vars) (setq umax (if arg
> ... org-export-headline-levels)) (setq umax-toc (if ... ... umax))
> (setq org-lparse-opt-plist (plist-put org-lparse-opt-plist
> :headline-levels umax)) (when (and org-export-with-toc ...) (setq
> lines ...)) (unless body-only (org-lparse-begin ... opt-plist)
> (org-lparse-begin ... opt-plist)) (setq head-count 0)
> (org-init-section-numbers) (org-lparse-begin-paragraph) (while (setq
> line ... origline line) (catch
> ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...))
> (when (org-lparse-current-environment-p ...)
> (org-lparse-end-environment ...)) (org-lparse-end-level 1 umax) (when
> (and ... org-lparse-dyn-first-heading-pos)
> (org-lparse-end-outline-text-or-outline)) (org-lparse-end (quote
> DOCUMENT-BODY) opt-plist) (unless body-only (org-lparse-end ...))
> (org-lparse-end (quote EXPORT)) (when org-lparse-collect-buffer
> (kill-buffer org-lparse-collect-buffer)) (goto-char (point-min)) (or
> (org-export-push-to-kill-ring ...) (message "Exporting... done"))
> (cond (... ... ...) (... ...) (t ...)))
>   (let* (hfy-user-sheet-assoc org-lparse-encode-pending
> org-lparse-par-open (org-lparse-par-open-stashed 0)
> (org-lparse-list-stack ...) org-lparse-list-table-p 
> org-lparse-list-table:table-cell-open org-lparse-list-table:table-row
> org-lparse-list-table:lines org-lparse-outline-text-open
> (org-lparse-latex-fragment-fallback ...)
> (org-lparse-insert-tag-with-newlines ...) (org-lparse-to-buffer
> to-buffer) (org-lparse-body-only body-only)
> (org-lparse-entity-control-callbacks-alist ...)
> (org-lparse-entity-format-callbacks-alist ...) (opt-plist ...)
> (body-only ...) valid org-lparse-dyn-first-heading-pos (odd
> org-odd-levels-only) (region-p ...) (rbeg ...) (rend ...) (subtree-p 
> ...) (level-offset ...) (opt-plist ...) (org-current-export-dir ...)
> (org-current-export-file buffer-file-name) (level 0) (line "")
> (origline "") txt todo (umax nil) (umax-toc nil) (filename ...)
> (current-dir ...) (auto-insert nil) (buffer ...) (org-levels-open ...)
> (dummy ...) (date ...) (date ...) (dummy ...) (title ...) (dummy ...)
> (html-table-tag ...) (quote-re0 ...) (quote-re ...) ...) (let (...)
> (org-unmodified ...)) (message "Exporting...")
> (org-init-section-numbers) (setq org-lparse-output-buffer buffer)
> (set-buffer org-lparse-output-buffer) (let (...) (erase-buffer))
> (fundamental-mode) (org-install-letbind) (and (fboundp ...)
> (set-buffer-file-coding-system coding-system-for-write)) (let
> (... ...) (mapc ... org-export-plist-vars) (setq umax ...) (setq
> umax-toc ...) (setq org-lparse-opt-plist ...) (when ... ...) (unless
> body-only ... ...) (setq head-count 0) (org-init-section-numbers)
> (org-lparse-begin-paragraph) (while ... ...) (when ... ...)
> (org-lparse-end-level 1 umax) (when ... ...) (org-lparse-end
> ... opt-plist) (unless body-only ...) (org-lparse-end ...) (when
> org-lparse-collect-buffer ...) (goto-char ...) (or ... ...) (cond
> ... ... ...)))
>   org-do-lparse(3 hidden nil nil nil nil)
>   (prog1 (org-do-lparse arg hidden ext-plist to-buffer body-only
> pub-dir) (remove-hook (quote org-export-preprocess-hook) (quote
> org-lparse-strip-experimental-blocks-maybe)) (remove-hook (quote
> org-export-preprocess-after-blockquote-hook) (quote
> org-lparse-preprocess-after-blockquote)))
>   (let* ((org-lparse-backend ...) (org-lparse-other-backend ...))
> (add-hook (quote org-export-preprocess-hook) (quote
> org-lparse-strip-experimental-blocks-maybe)) (add-hook (quote
> org-export-preprocess-after-blockquote-hook) (quote
> org-lparse-preprocess-after-blockquote)) (unless
> (org-lparse-backend-is-native-p native-backend) (error "Don't know how
> to export natively to backend %s" native-backend)) (unless (or
> ... ...) (error "Don't know how to export to backend %s %s"
> target-backend ...)) (run-hooks (quote org-export-first-hook)) (prog1
> (org-do-lparse arg hidden ext-plist to-buffer body-only pub-dir)
> (remove-hook ... ...) (remove-hook ... ...)))
>   org-lparse("odt" "odt" 3 hidden)
>   org-lparse-batch("odt")
>   org-export-as-odt-batch()
>   command-line-1(("--load=/home/aldrichtr/.emacs" "--visit=./test.org"
> "--funcall" "org-export-as-odt-batch"))
>   command-line()
>   normal-top-level()
>
> aldrichtr@liberty:/tmp/export-process
> $ ls
> test.odt
> aldrichtr@liberty:/tmp/export-process
> $
>
>
>

-- 

org-odt: Batch exports creates data loss, deletes original org file

[Jambunathan K]

> Thank you for your reply.  Below you will find a small example to
> illustrate the problem.  First I have a small test org-mode file in
> the directory, =test.org=.  It's contents is shown next.  I run the
> batch process, which causes an error.   All files in the directory are
> deleted except for the .odt file !

Data loss is very bad.  I am sorry.  Looks like you had backups.

I will forward a fix to Org/Emacs in few hours.

> $ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall
> org-export-as-odt-batch

Meanwhile, instead of using `org-export-as-odt-batch', you can try the
following which uses `org-export-as-odt'.

$ emacs --batch -Q -L ~/src/org-mode/lisp --visit=./test-new.org --funcall
org-export-as-odt


> Thanks again.  I am running emacs version 23.4.1 on Ubuntu 12.10, and
> org-mode from elpa package =org-plus-contrib 20121217=
>
> -Tim
>
>
> aldrichtr@liberty:/tmp/export-process
> $ ls
> test.org
> aldrichtr@liberty:/tmp/export-process
> $ cat test.org
>
> * This is heading one
>   And some text
> ** heading one two
>    And some text
>
> aldrichtr@liberty:/tmp/export-process
> $ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall
> org-export-as-odt-batch
> ...
> Debug (org-odt): Searching for OpenDocument schema files...
> Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
> Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
> Debug (org-odt): No OpenDocument schema files installed
> Debug (org-odt): Searching for OpenDocument styles files...
> Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
> Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
> Debug (org-odt): Trying /home/aldrichtr/.emacs.d/elpa/etc/styles/...
> Debug (org-odt): Trying
> /home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/...
> Debug (org-odt): Using styles under
> /home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/
> Exporting to ODT using org-lparse...
> Using vacuous schema
> [yas] Loading for `nxml-mode', just-in-time: (yas--load-directory-1 
> /home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
> (quote nxml-mode) (quote (text-mode)))!
> [yas] Loading compiled snippets from
> /home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
> LaTeX to MathML converter not available. Using verbatim instead.
> Exporting...
> ODT export done, pushed to kill ring and clipboard
> Wrote /tmp/export-process/meta.xml
> Using vacuous schema
> Saving file /tmp/export-process/styles.xml...
> Wrote /tmp/export-process/styles.xml
> Wrote /tmp/export-process/mimetype
> Using vacuous schema
> Saving file /tmp/export-process/styles.xml...
> Wrote /tmp/export-process/styles.xml
> (No changes need to be saved)
> Saving file /tmp/export-process/META-INF/manifest.xml...
> Wrote /tmp/export-process/META-INF/manifest.xml
> Saving file /tmp/export-process/content.xml...
> Wrote /tmp/export-process/content.xml
> Using vacuous schema
> (No changes need to be saved)
> Creating odt file...
> Running zip -mX0 test.odt mimetype
> Running zip -rmTq test.odt .
> Debugger entered--Lisp error: (file-already-exists "File already
> exists" "/tmp/export-process/test.odt")
>   rename-file("test.odt" "/tmp/export-process/")
>   (let* ((target-name ...) (target-dir ...) (cmds ...)) (when
> (file-exists-p target) (delete-file target)) (let (... exitcode
> err-string) (message "Creating odt file...") (mapc ... cmds))
> (rename-file target-name target-dir))
>   (let ((xml-files ...)) (when (equal org-lparse-backend ...) (push
> "styles.xml" xml-files)) (mapc (lambda ... ...) xml-files) (let*
> (... ... ...) (when ... ...) (let ... ... ...) (rename-file
> target-name target-dir)))
>   org-odt-save-as-outfile("/tmp/export-process/test.odt"
> (:latex-image-options nil :exclude-tags ("noexport") :select-tags
> ("export") :publishing-directory nil :timestamp nil
> :expand-quoted-html t :html-table-tag "<table border=\"2\"
> cellspacing=\"0\" cellpadding=\"6\" rules=\"groups\"
> frame=\"hsides\">" :xml-declaration (("html" . "<?xml version=\"1.0\"
> encoding=\"%s\"?>") ("php" . "<?php echo \"<?xml version=\\\"1.0\\\"
> encoding=\\\"%s\\\" ?>\"; ?>")) :html-postamble auto :html-preamble t
> :html-extension "html" :inline-images maybe :convert-org-links t
> :agenda-style nil :style-extra "" :style "" :style-include-scripts t
> :style-include-default t :table-auto-headline t :tables t
> :time-stamp-file t :creator-info t :email-info nil :author-info t
> :email "wiskey5alpha@gmail.com" ...))
>   funcall(org-odt-save-as-outfile "/tmp/export-process/test.odt"
> (:latex-image-options nil :exclude-tags ("noexport") :select-tags
> ("export") :publishing-directory nil :timestamp nil
> :expand-quoted-html t :html-table-tag "<table border=\"2\"
> cellspacing=\"0\" cellpadding=\"6\" rules=\"groups\"
> frame=\"hsides\">" :xml-declaration (("html" . "<?xml version=\"1.0\"
> encoding=\"%s\"?>") ("php" . "<?php echo \"<?xml version=\\\"1.0\\\"
> encoding=\\\"%s\\\" ?>\"; ?>")) :html-postamble auto :html-preamble t
> :html-extension "html" :inline-images maybe :convert-org-links t
> :agenda-style nil :style-extra "" :style "" :style-include-scripts t
> :style-include-default t :table-auto-headline t :tables t
> :time-stamp-file t :creator-info t :email-info nil :author-info t
> :email "wiskey5alpha@gmail.com" ...))
>   (and f (functionp f) (funcall f filename opt-plist))
>   (or (and f (functionp f) (funcall f filename opt-plist)) (save-buffer))
>   (let ((f ...)) (or (and f ... ...) (save-buffer)))
>   (cond ((not to-buffer) (let ... ...) (or ... ...)) ((eq to-buffer
> ...) (prog1 ... ...)) (t (current-buffer)))
>   (let ((case-fold-search nil) (org-odd-levels-only odd)) (mapc
> (lambda ... ...) org-export-plist-vars) (setq umax (if arg
> ... org-export-headline-levels)) (setq umax-toc (if ... ... umax))
> (setq org-lparse-opt-plist (plist-put org-lparse-opt-plist
> :headline-levels umax)) (when (and org-export-with-toc ...) (setq
> lines ...)) (unless body-only (org-lparse-begin ... opt-plist)
> (org-lparse-begin ... opt-plist)) (setq head-count 0)
> (org-init-section-numbers) (org-lparse-begin-paragraph) (while (setq
> line ... origline line) (catch
> ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...))
> (when (org-lparse-current-environment-p ...)
> (org-lparse-end-environment ...)) (org-lparse-end-level 1 umax) (when
> (and ... org-lparse-dyn-first-heading-pos)
> (org-lparse-end-outline-text-or-outline)) (org-lparse-end (quote
> DOCUMENT-BODY) opt-plist) (unless body-only (org-lparse-end ...))
> (org-lparse-end (quote EXPORT)) (when org-lparse-collect-buffer
> (kill-buffer org-lparse-collect-buffer)) (goto-char (point-min)) (or
> (org-export-push-to-kill-ring ...) (message "Exporting... done"))
> (cond (... ... ...) (... ...) (t ...)))
>   (let* (hfy-user-sheet-assoc org-lparse-encode-pending
> org-lparse-par-open (org-lparse-par-open-stashed 0)
> (org-lparse-list-stack ...) org-lparse-list-table-p 
> org-lparse-list-table:table-cell-open org-lparse-list-table:table-row
> org-lparse-list-table:lines org-lparse-outline-text-open
> (org-lparse-latex-fragment-fallback ...)
> (org-lparse-insert-tag-with-newlines ...) (org-lparse-to-buffer
> to-buffer) (org-lparse-body-only body-only)
> (org-lparse-entity-control-callbacks-alist ...)
> (org-lparse-entity-format-callbacks-alist ...) (opt-plist ...)
> (body-only ...) valid org-lparse-dyn-first-heading-pos (odd
> org-odd-levels-only) (region-p ...) (rbeg ...) (rend ...) (subtree-p 
> ...) (level-offset ...) (opt-plist ...) (org-current-export-dir ...)
> (org-current-export-file buffer-file-name) (level 0) (line "")
> (origline "") txt todo (umax nil) (umax-toc nil) (filename ...)
> (current-dir ...) (auto-insert nil) (buffer ...) (org-levels-open ...)
> (dummy ...) (date ...) (date ...) (dummy ...) (title ...) (dummy ...)
> (html-table-tag ...) (quote-re0 ...) (quote-re ...) ...) (let (...)
> (org-unmodified ...)) (message "Exporting...")
> (org-init-section-numbers) (setq org-lparse-output-buffer buffer)
> (set-buffer org-lparse-output-buffer) (let (...) (erase-buffer))
> (fundamental-mode) (org-install-letbind) (and (fboundp ...)
> (set-buffer-file-coding-system coding-system-for-write)) (let
> (... ...) (mapc ... org-export-plist-vars) (setq umax ...) (setq
> umax-toc ...) (setq org-lparse-opt-plist ...) (when ... ...) (unless
> body-only ... ...) (setq head-count 0) (org-init-section-numbers)
> (org-lparse-begin-paragraph) (while ... ...) (when ... ...)
> (org-lparse-end-level 1 umax) (when ... ...) (org-lparse-end
> ... opt-plist) (unless body-only ...) (org-lparse-end ...) (when
> org-lparse-collect-buffer ...) (goto-char ...) (or ... ...) (cond
> ... ... ...)))
>   org-do-lparse(3 hidden nil nil nil nil)
>   (prog1 (org-do-lparse arg hidden ext-plist to-buffer body-only
> pub-dir) (remove-hook (quote org-export-preprocess-hook) (quote
> org-lparse-strip-experimental-blocks-maybe)) (remove-hook (quote
> org-export-preprocess-after-blockquote-hook) (quote
> org-lparse-preprocess-after-blockquote)))
>   (let* ((org-lparse-backend ...) (org-lparse-other-backend ...))
> (add-hook (quote org-export-preprocess-hook) (quote
> org-lparse-strip-experimental-blocks-maybe)) (add-hook (quote
> org-export-preprocess-after-blockquote-hook) (quote
> org-lparse-preprocess-after-blockquote)) (unless
> (org-lparse-backend-is-native-p native-backend) (error "Don't know how
> to export natively to backend %s" native-backend)) (unless (or
> ... ...) (error "Don't know how to export to backend %s %s"
> target-backend ...)) (run-hooks (quote org-export-first-hook)) (prog1
> (org-do-lparse arg hidden ext-plist to-buffer body-only pub-dir)
> (remove-hook ... ...) (remove-hook ... ...)))
>   org-lparse("odt" "odt" 3 hidden)
>   org-lparse-batch("odt")
>   org-export-as-odt-batch()
>   command-line-1(("--load=/home/aldrichtr/.emacs" "--visit=./test.org"
> "--funcall" "org-export-as-odt-batch"))
>   command-line()
>   normal-top-level()
>
> aldrichtr@liberty:/tmp/export-process
> $ ls
> test.odt
> aldrichtr@liberty:/tmp/export-process
> $
>
>
>

-- 

Re: Publishing org project as odt

[Jambunathan K]

Wiskey 5 Alpha <wiskey5alpha@gmail.com> writes:

> On 12/22/2012 07:54 AM, Jambunathan K wrote:
>> Wiskey 5 Alpha <wiskey5alpha@gmail.com> writes:
>>
>>> Hello,
>>>     I have a rather large project that I currently export to odt
>>> files. I tried the org-export-as-odt-batch command line function but
>>> it fails,
>>
>> Can you tell how it fails. In your init file (the one used by batch
>> emacs), you can put
>>
>>      (setq debug-on-error t)
>>
>> to get a stack trace or some such info.
>>
>>> and subsequently deletes all files in the directory.
>>
>> Deletes what files?
> I guess technically , it doesn't delete them, but they are zipped into
> the .odt file, and not present in the directory...

True.  The .org file - I believe everything in the work dir - goes in to
the ZIP file.  So it is in the ZIP file.

But when a file is lost, panic ensues and brain stops working.
-- 

Re: Publishing org project as odt

[Wiskey 5 Alpha]

On 12/22/2012 01:11 PM, Jambunathan K wrote:

> True.  The .org file - I believe everything in the work dir - goes in to
> the ZIP file.  So it is in the ZIP file.
>
> But when a file is lost, panic ensues and brain stops working.
>
So true.  I saw the error message mentioned the file existed, so i 
deleted the odt file (with rm *.odt) and then panics as i noticed the 
folder was now empty... even the .git directory.  Had i not deleted the 
odt file i could have unzipped and been back on track... lesson learned

Thank you so much for your help.  Happy Holidays !

-Tim

bug#13254: org-odt: Batch exports creates data loss, deletes original org file

[Jambunathan K]

Bastien

I have pushed a fix to my private branch (see below).  Please merge both
`maint' AND `master' branches.

`maint' branch
 -  has 2 fixes for org-odt.el

`master' branch 
 - above fixes
 - New exporter changes.

,---- http://repo.or.cz/w/org-mode/org-kjn.git
|
| URL:      git://repo.or.cz/org-mode/org-kjn.git
|           http://repo.or.cz/r/org-mode/org-kjn.git
| 
| Push URL: ssh://repo.or.cz/srv/git/org-mode/org-kjn.git
|
`----

,---- git log --format=oneline upstream/maint..
|
| 82e061 org-odt.el: Fix Emacs Bug#13254
| 443542 org-odt.el: Correctly format link to headlines that have
|
`----

,---- git log --format=oneline upstream/master..
|
| 507ce4 org-odt.el: Fix Emacs Bug#13254
| 0754e3 org-e-odt.el: Handle links to target, list items
| ad2ee6 org-e-odt.el: Handle links to headline, table etc that h
| 3a2b5d org-odt.el: Correctly format link to headlines that have
| c4597f org-e-odt.el: Handle clickable images
| a7ad1c org-e-odt.el: Use `org-export-data-with-translations'
| 76d529 org-e-odt.el: Support for short captions
| 9d496c org-e-odt.el: Port fix for Bug#13197
| 9d56ba org-e-odt.el: Fix typesetting of Math formulae
| fe0b1c org-e-odt.el: Add frame title and description to latex e
| 6faf36 org-odt.el: Improve TOC entries
| d9d62a org-e-odt.el: Emit priority in headlines, right justify 
| 533c8a org-e-odt.el: Not all keywords are supported
| 1e30ef org-e-odt.el: Use new version of org-export-get-previous
| 84eadb org-e-odt.el: New experimental option `org-e-odt-use-dat
| 64b7c8 Fix Table of Contents, Clock block and various styles
| acbb74 org-e-odt.el: Fix export issues on Windows XP
| a2f5d8 org-e-odt.el: Honor `org-export-with-date'
| 087936 Update OpenDocument schema files to v1.2 OASIS standard
| d904e5 OrgOdtStyles.xml, OrgOdtContentTemplate.xml: Refresh
|
`----

Jambunathan K <kjambunathan@gmail.com> writes:

>> Thank you for your reply.  Below you will find a small example to
>> illustrate the problem.  First I have a small test org-mode file in
>> the directory, =test.org=.  It's contents is shown next.  I run the
>> batch process, which causes an error.   All files in the directory are
>> deleted except for the .odt file !
>
> Data loss is very bad.  I am sorry.  Looks like you had backups.
>
> I will forward a fix to Org/Emacs in few hours.
>
>> $ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall
>> org-export-as-odt-batch
>
> Meanwhile, instead of using `org-export-as-odt-batch', you can try the
> following which uses `org-export-as-odt'.
>
> $ emacs --batch -Q -L ~/src/org-mode/lisp --visit=./test-new.org --funcall
> org-export-as-odt
>
>
>> Thanks again.  I am running emacs version 23.4.1 on Ubuntu 12.10, and
>> org-mode from elpa package =org-plus-contrib 20121217=
>>
>> -Tim
>>
>>
>> aldrichtr@liberty:/tmp/export-process
>> $ ls
>> test.org
>> aldrichtr@liberty:/tmp/export-process
>> $ cat test.org
>>
>> * This is heading one
>>   And some text
>> ** heading one two
>>    And some text
>>
>> aldrichtr@liberty:/tmp/export-process
>> $ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall
>> org-export-as-odt-batch
>> ...
>> Debug (org-odt): Searching for OpenDocument schema files...
>> Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
>> Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
>> Debug (org-odt): No OpenDocument schema files installed
>> Debug (org-odt): Searching for OpenDocument styles files...
>> Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
>> Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
>> Debug (org-odt): Trying /home/aldrichtr/.emacs.d/elpa/etc/styles/...
>> Debug (org-odt): Trying
>> /home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/...
>> Debug (org-odt): Using styles under
>> /home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/
>> Exporting to ODT using org-lparse...
>> Using vacuous schema
>> [yas] Loading for `nxml-mode', just-in-time: (yas--load-directory-1 
>> /home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
>> (quote nxml-mode) (quote (text-mode)))!
>> [yas] Loading compiled snippets from
>> /home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
>> LaTeX to MathML converter not available. Using verbatim instead.
>> Exporting...
>> ODT export done, pushed to kill ring and clipboard
>> Wrote /tmp/export-process/meta.xml
>> Using vacuous schema
>> Saving file /tmp/export-process/styles.xml...
>> Wrote /tmp/export-process/styles.xml
>> Wrote /tmp/export-process/mimetype
>> Using vacuous schema
>> Saving file /tmp/export-process/styles.xml...
>> Wrote /tmp/export-process/styles.xml
>> (No changes need to be saved)
>> Saving file /tmp/export-process/META-INF/manifest.xml...
>> Wrote /tmp/export-process/META-INF/manifest.xml
>> Saving file /tmp/export-process/content.xml...
>> Wrote /tmp/export-process/content.xml
>> Using vacuous schema
>> (No changes need to be saved)
>> Creating odt file...
>> Running zip -mX0 test.odt mimetype
>> Running zip -rmTq test.odt .
>> Debugger entered--Lisp error: (file-already-exists "File already
>> exists" "/tmp/export-process/test.odt")
>>   rename-file("test.odt" "/tmp/export-process/")
>>   (let* ((target-name ...) (target-dir ...) (cmds ...)) (when
>> (file-exists-p target) (delete-file target)) (let (... exitcode
>> err-string) (message "Creating odt file...") (mapc ... cmds))
>> (rename-file target-name target-dir))
>>   (let ((xml-files ...)) (when (equal org-lparse-backend ...) (push
>> "styles.xml" xml-files)) (mapc (lambda ... ...) xml-files) (let*
>> (... ... ...) (when ... ...) (let ... ... ...) (rename-file
>> target-name target-dir)))
>>   org-odt-save-as-outfile("/tmp/export-process/test.odt"
>> (:latex-image-options nil :exclude-tags ("noexport") :select-tags
>> ("export") :publishing-directory nil :timestamp nil
>> :expand-quoted-html t :html-table-tag "<table border=\"2\"
>> cellspacing=\"0\" cellpadding=\"6\" rules=\"groups\"
>> frame=\"hsides\">" :xml-declaration (("html" . "<?xml version=\"1.0\"
>> encoding=\"%s\"?>") ("php" . "<?php echo \"<?xml version=\\\"1.0\\\"
>> encoding=\\\"%s\\\" ?>\"; ?>")) :html-postamble auto :html-preamble t
>> :html-extension "html" :inline-images maybe :convert-org-links t
>> :agenda-style nil :style-extra "" :style "" :style-include-scripts t
>> :style-include-default t :table-auto-headline t :tables t
>> :time-stamp-file t :creator-info t :email-info nil :author-info t
>> :email "wiskey5alpha@gmail.com" ...))
>>   funcall(org-odt-save-as-outfile "/tmp/export-process/test.odt"
>> (:latex-image-options nil :exclude-tags ("noexport") :select-tags
>> ("export") :publishing-directory nil :timestamp nil
>> :expand-quoted-html t :html-table-tag "<table border=\"2\"
>> cellspacing=\"0\" cellpadding=\"6\" rules=\"groups\"
>> frame=\"hsides\">" :xml-declaration (("html" . "<?xml version=\"1.0\"
>> encoding=\"%s\"?>") ("php" . "<?php echo \"<?xml version=\\\"1.0\\\"
>> encoding=\\\"%s\\\" ?>\"; ?>")) :html-postamble auto :html-preamble t
>> :html-extension "html" :inline-images maybe :convert-org-links t
>> :agenda-style nil :style-extra "" :style "" :style-include-scripts t
>> :style-include-default t :table-auto-headline t :tables t
>> :time-stamp-file t :creator-info t :email-info nil :author-info t
>> :email "wiskey5alpha@gmail.com" ...))
>>   (and f (functionp f) (funcall f filename opt-plist))
>>   (or (and f (functionp f) (funcall f filename opt-plist)) (save-buffer))
>>   (let ((f ...)) (or (and f ... ...) (save-buffer)))
>>   (cond ((not to-buffer) (let ... ...) (or ... ...)) ((eq to-buffer
>> ...) (prog1 ... ...)) (t (current-buffer)))
>>   (let ((case-fold-search nil) (org-odd-levels-only odd)) (mapc
>> (lambda ... ...) org-export-plist-vars) (setq umax (if arg
>> ... org-export-headline-levels)) (setq umax-toc (if ... ... umax))
>> (setq org-lparse-opt-plist (plist-put org-lparse-opt-plist
>> :headline-levels umax)) (when (and org-export-with-toc ...) (setq
>> lines ...)) (unless body-only (org-lparse-begin ... opt-plist)
>> (org-lparse-begin ... opt-plist)) (setq head-count 0)
>> (org-init-section-numbers) (org-lparse-begin-paragraph) (while (setq
>> line ... origline line) (catch
>> ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...))
>> (when (org-lparse-current-environment-p ...)
>> (org-lparse-end-environment ...)) (org-lparse-end-level 1 umax) (when
>> (and ... org-lparse-dyn-first-heading-pos)
>> (org-lparse-end-outline-text-or-outline)) (org-lparse-end (quote
>> DOCUMENT-BODY) opt-plist) (unless body-only (org-lparse-end ...))
>> (org-lparse-end (quote EXPORT)) (when org-lparse-collect-buffer
>> (kill-buffer org-lparse-collect-buffer)) (goto-char (point-min)) (or
>> (org-export-push-to-kill-ring ...) (message "Exporting... done"))
>> (cond (... ... ...) (... ...) (t ...)))
>>   (let* (hfy-user-sheet-assoc org-lparse-encode-pending
>> org-lparse-par-open (org-lparse-par-open-stashed 0)
>> (org-lparse-list-stack ...) org-lparse-list-table-p 
>> org-lparse-list-table:table-cell-open org-lparse-list-table:table-row
>> org-lparse-list-table:lines org-lparse-outline-text-open
>> (org-lparse-latex-fragment-fallback ...)
>> (org-lparse-insert-tag-with-newlines ...) (org-lparse-to-buffer
>> to-buffer) (org-lparse-body-only body-only)
>> (org-lparse-entity-control-callbacks-alist ...)
>> (org-lparse-entity-format-callbacks-alist ...) (opt-plist ...)
>> (body-only ...) valid org-lparse-dyn-first-heading-pos (odd
>> org-odd-levels-only) (region-p ...) (rbeg ...) (rend ...) (subtree-p 
>> ...) (level-offset ...) (opt-plist ...) (org-current-export-dir ...)
>> (org-current-export-file buffer-file-name) (level 0) (line "")
>> (origline "") txt todo (umax nil) (umax-toc nil) (filename ...)
>> (current-dir ...) (auto-insert nil) (buffer ...) (org-levels-open ...)
>> (dummy ...) (date ...) (date ...) (dummy ...) (title ...) (dummy ...)
>> (html-table-tag ...) (quote-re0 ...) (quote-re ...) ...) (let (...)
>> (org-unmodified ...)) (message "Exporting...")
>> (org-init-section-numbers) (setq org-lparse-output-buffer buffer)
>> (set-buffer org-lparse-output-buffer) (let (...) (erase-buffer))
>> (fundamental-mode) (org-install-letbind) (and (fboundp ...)
>> (set-buffer-file-coding-system coding-system-for-write)) (let
>> (... ...) (mapc ... org-export-plist-vars) (setq umax ...) (setq
>> umax-toc ...) (setq org-lparse-opt-plist ...) (when ... ...) (unless
>> body-only ... ...) (setq head-count 0) (org-init-section-numbers)
>> (org-lparse-begin-paragraph) (while ... ...) (when ... ...)
>> (org-lparse-end-level 1 umax) (when ... ...) (org-lparse-end
>> ... opt-plist) (unless body-only ...) (org-lparse-end ...) (when
>> org-lparse-collect-buffer ...) (goto-char ...) (or ... ...) (cond
>> ... ... ...)))
>>   org-do-lparse(3 hidden nil nil nil nil)
>>   (prog1 (org-do-lparse arg hidden ext-plist to-buffer body-only
>> pub-dir) (remove-hook (quote org-export-preprocess-hook) (quote
>> org-lparse-strip-experimental-blocks-maybe)) (remove-hook (quote
>> org-export-preprocess-after-blockquote-hook) (quote
>> org-lparse-preprocess-after-blockquote)))
>>   (let* ((org-lparse-backend ...) (org-lparse-other-backend ...))
>> (add-hook (quote org-export-preprocess-hook) (quote
>> org-lparse-strip-experimental-blocks-maybe)) (add-hook (quote
>> org-export-preprocess-after-blockquote-hook) (quote
>> org-lparse-preprocess-after-blockquote)) (unless
>> (org-lparse-backend-is-native-p native-backend) (error "Don't know how
>> to export natively to backend %s" native-backend)) (unless (or
>> ... ...) (error "Don't know how to export to backend %s %s"
>> target-backend ...)) (run-hooks (quote org-export-first-hook)) (prog1
>> (org-do-lparse arg hidden ext-plist to-buffer body-only pub-dir)
>> (remove-hook ... ...) (remove-hook ... ...)))
>>   org-lparse("odt" "odt" 3 hidden)
>>   org-lparse-batch("odt")
>>   org-export-as-odt-batch()
>>   command-line-1(("--load=/home/aldrichtr/.emacs" "--visit=./test.org"
>> "--funcall" "org-export-as-odt-batch"))
>>   command-line()
>>   normal-top-level()
>>
>> aldrichtr@liberty:/tmp/export-process
>> $ ls
>> test.odt
>> aldrichtr@liberty:/tmp/export-process
>> $
>>
>>
>>

-- 

Re: bug#13254: org-odt: Batch exports creates data loss, deletes original org file

[Jambunathan K]

Bastien

I have pushed a fix to my private branch (see below).  Please merge both
`maint' AND `master' branches.

`maint' branch
 -  has 2 fixes for org-odt.el

`master' branch 
 - above fixes
 - New exporter changes.

,---- http://repo.or.cz/w/org-mode/org-kjn.git
|
| URL:      git://repo.or.cz/org-mode/org-kjn.git
|           http://repo.or.cz/r/org-mode/org-kjn.git
| 
| Push URL: ssh://repo.or.cz/srv/git/org-mode/org-kjn.git
|
`----

,---- git log --format=oneline upstream/maint..
|
| 82e061 org-odt.el: Fix Emacs Bug#13254
| 443542 org-odt.el: Correctly format link to headlines that have
|
`----

,---- git log --format=oneline upstream/master..
|
| 507ce4 org-odt.el: Fix Emacs Bug#13254
| 0754e3 org-e-odt.el: Handle links to target, list items
| ad2ee6 org-e-odt.el: Handle links to headline, table etc that h
| 3a2b5d org-odt.el: Correctly format link to headlines that have
| c4597f org-e-odt.el: Handle clickable images
| a7ad1c org-e-odt.el: Use `org-export-data-with-translations'
| 76d529 org-e-odt.el: Support for short captions
| 9d496c org-e-odt.el: Port fix for Bug#13197
| 9d56ba org-e-odt.el: Fix typesetting of Math formulae
| fe0b1c org-e-odt.el: Add frame title and description to latex e
| 6faf36 org-odt.el: Improve TOC entries
| d9d62a org-e-odt.el: Emit priority in headlines, right justify 
| 533c8a org-e-odt.el: Not all keywords are supported
| 1e30ef org-e-odt.el: Use new version of org-export-get-previous
| 84eadb org-e-odt.el: New experimental option `org-e-odt-use-dat
| 64b7c8 Fix Table of Contents, Clock block and various styles
| acbb74 org-e-odt.el: Fix export issues on Windows XP
| a2f5d8 org-e-odt.el: Honor `org-export-with-date'
| 087936 Update OpenDocument schema files to v1.2 OASIS standard
| d904e5 OrgOdtStyles.xml, OrgOdtContentTemplate.xml: Refresh
|
`----

Jambunathan K <kjambunathan@gmail.com> writes:

>> Thank you for your reply.  Below you will find a small example to
>> illustrate the problem.  First I have a small test org-mode file in
>> the directory, =test.org=.  It's contents is shown next.  I run the
>> batch process, which causes an error.   All files in the directory are
>> deleted except for the .odt file !
>
> Data loss is very bad.  I am sorry.  Looks like you had backups.
>
> I will forward a fix to Org/Emacs in few hours.
>
>> $ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall
>> org-export-as-odt-batch
>
> Meanwhile, instead of using `org-export-as-odt-batch', you can try the
> following which uses `org-export-as-odt'.
>
> $ emacs --batch -Q -L ~/src/org-mode/lisp --visit=./test-new.org --funcall
> org-export-as-odt
>
>
>> Thanks again.  I am running emacs version 23.4.1 on Ubuntu 12.10, and
>> org-mode from elpa package =org-plus-contrib 20121217=
>>
>> -Tim
>>
>>
>> aldrichtr@liberty:/tmp/export-process
>> $ ls
>> test.org
>> aldrichtr@liberty:/tmp/export-process
>> $ cat test.org
>>
>> * This is heading one
>>   And some text
>> ** heading one two
>>    And some text
>>
>> aldrichtr@liberty:/tmp/export-process
>> $ emacs --batch --load=$HOME/.emacs --visit=./test.org --funcall
>> org-export-as-odt-batch
>> ...
>> Debug (org-odt): Searching for OpenDocument schema files...
>> Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
>> Debug (org-odt): Trying /usr/share/emacs/etc/org/schema/...
>> Debug (org-odt): No OpenDocument schema files installed
>> Debug (org-odt): Searching for OpenDocument styles files...
>> Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
>> Debug (org-odt): Trying /usr/share/emacs/etc/org/styles/...
>> Debug (org-odt): Trying /home/aldrichtr/.emacs.d/elpa/etc/styles/...
>> Debug (org-odt): Trying
>> /home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/...
>> Debug (org-odt): Using styles under
>> /home/aldrichtr/.emacs.d/elpa/org-plus-contrib-20121217/etc/styles/
>> Exporting to ODT using org-lparse...
>> Using vacuous schema
>> [yas] Loading for `nxml-mode', just-in-time: (yas--load-directory-1 
>> /home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
>> (quote nxml-mode) (quote (text-mode)))!
>> [yas] Loading compiled snippets from
>> /home/aldrichtr/.emacs.d/elpa/yasnippet-20121127.25/snippets/nxml-mode
>> LaTeX to MathML converter not available. Using verbatim instead.
>> Exporting...
>> ODT export done, pushed to kill ring and clipboard
>> Wrote /tmp/export-process/meta.xml
>> Using vacuous schema
>> Saving file /tmp/export-process/styles.xml...
>> Wrote /tmp/export-process/styles.xml
>> Wrote /tmp/export-process/mimetype
>> Using vacuous schema
>> Saving file /tmp/export-process/styles.xml...
>> Wrote /tmp/export-process/styles.xml
>> (No changes need to be saved)
>> Saving file /tmp/export-process/META-INF/manifest.xml...
>> Wrote /tmp/export-process/META-INF/manifest.xml
>> Saving file /tmp/export-process/content.xml...
>> Wrote /tmp/export-process/content.xml
>> Using vacuous schema
>> (No changes need to be saved)
>> Creating odt file...
>> Running zip -mX0 test.odt mimetype
>> Running zip -rmTq test.odt .
>> Debugger entered--Lisp error: (file-already-exists "File already
>> exists" "/tmp/export-process/test.odt")
>>   rename-file("test.odt" "/tmp/export-process/")
>>   (let* ((target-name ...) (target-dir ...) (cmds ...)) (when
>> (file-exists-p target) (delete-file target)) (let (... exitcode
>> err-string) (message "Creating odt file...") (mapc ... cmds))
>> (rename-file target-name target-dir))
>>   (let ((xml-files ...)) (when (equal org-lparse-backend ...) (push
>> "styles.xml" xml-files)) (mapc (lambda ... ...) xml-files) (let*
>> (... ... ...) (when ... ...) (let ... ... ...) (rename-file
>> target-name target-dir)))
>>   org-odt-save-as-outfile("/tmp/export-process/test.odt"
>> (:latex-image-options nil :exclude-tags ("noexport") :select-tags
>> ("export") :publishing-directory nil :timestamp nil
>> :expand-quoted-html t :html-table-tag "<table border=\"2\"
>> cellspacing=\"0\" cellpadding=\"6\" rules=\"groups\"
>> frame=\"hsides\">" :xml-declaration (("html" . "<?xml version=\"1.0\"
>> encoding=\"%s\"?>") ("php" . "<?php echo \"<?xml version=\\\"1.0\\\"
>> encoding=\\\"%s\\\" ?>\"; ?>")) :html-postamble auto :html-preamble t
>> :html-extension "html" :inline-images maybe :convert-org-links t
>> :agenda-style nil :style-extra "" :style "" :style-include-scripts t
>> :style-include-default t :table-auto-headline t :tables t
>> :time-stamp-file t :creator-info t :email-info nil :author-info t
>> :email "wiskey5alpha@gmail.com" ...))
>>   funcall(org-odt-save-as-outfile "/tmp/export-process/test.odt"
>> (:latex-image-options nil :exclude-tags ("noexport") :select-tags
>> ("export") :publishing-directory nil :timestamp nil
>> :expand-quoted-html t :html-table-tag "<table border=\"2\"
>> cellspacing=\"0\" cellpadding=\"6\" rules=\"groups\"
>> frame=\"hsides\">" :xml-declaration (("html" . "<?xml version=\"1.0\"
>> encoding=\"%s\"?>") ("php" . "<?php echo \"<?xml version=\\\"1.0\\\"
>> encoding=\\\"%s\\\" ?>\"; ?>")) :html-postamble auto :html-preamble t
>> :html-extension "html" :inline-images maybe :convert-org-links t
>> :agenda-style nil :style-extra "" :style "" :style-include-scripts t
>> :style-include-default t :table-auto-headline t :tables t
>> :time-stamp-file t :creator-info t :email-info nil :author-info t
>> :email "wiskey5alpha@gmail.com" ...))
>>   (and f (functionp f) (funcall f filename opt-plist))
>>   (or (and f (functionp f) (funcall f filename opt-plist)) (save-buffer))
>>   (let ((f ...)) (or (and f ... ...) (save-buffer)))
>>   (cond ((not to-buffer) (let ... ...) (or ... ...)) ((eq to-buffer
>> ...) (prog1 ... ...)) (t (current-buffer)))
>>   (let ((case-fold-search nil) (org-odd-levels-only odd)) (mapc
>> (lambda ... ...) org-export-plist-vars) (setq umax (if arg
>> ... org-export-headline-levels)) (setq umax-toc (if ... ... umax))
>> (setq org-lparse-opt-plist (plist-put org-lparse-opt-plist
>> :headline-levels umax)) (when (and org-export-with-toc ...) (setq
>> lines ...)) (unless body-only (org-lparse-begin ... opt-plist)
>> (org-lparse-begin ... opt-plist)) (setq head-count 0)
>> (org-init-section-numbers) (org-lparse-begin-paragraph) (while (setq
>> line ... origline line) (catch
>> ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...))
>> (when (org-lparse-current-environment-p ...)
>> (org-lparse-end-environment ...)) (org-lparse-end-level 1 umax) (when
>> (and ... org-lparse-dyn-first-heading-pos)
>> (org-lparse-end-outline-text-or-outline)) (org-lparse-end (quote
>> DOCUMENT-BODY) opt-plist) (unless body-only (org-lparse-end ...))
>> (org-lparse-end (quote EXPORT)) (when org-lparse-collect-buffer
>> (kill-buffer org-lparse-collect-buffer)) (goto-char (point-min)) (or
>> (org-export-push-to-kill-ring ...) (message "Exporting... done"))
>> (cond (... ... ...) (... ...) (t ...)))
>>   (let* (hfy-user-sheet-assoc org-lparse-encode-pending
>> org-lparse-par-open (org-lparse-par-open-stashed 0)
>> (org-lparse-list-stack ...) org-lparse-list-table-p 
>> org-lparse-list-table:table-cell-open org-lparse-list-table:table-row
>> org-lparse-list-table:lines org-lparse-outline-text-open
>> (org-lparse-latex-fragment-fallback ...)
>> (org-lparse-insert-tag-with-newlines ...) (org-lparse-to-buffer
>> to-buffer) (org-lparse-body-only body-only)
>> (org-lparse-entity-control-callbacks-alist ...)
>> (org-lparse-entity-format-callbacks-alist ...) (opt-plist ...)
>> (body-only ...) valid org-lparse-dyn-first-heading-pos (odd
>> org-odd-levels-only) (region-p ...) (rbeg ...) (rend ...) (subtree-p 
>> ...) (level-offset ...) (opt-plist ...) (org-current-export-dir ...)
>> (org-current-export-file buffer-file-name) (level 0) (line "")
>> (origline "") txt todo (umax nil) (umax-toc nil) (filename ...)
>> (current-dir ...) (auto-insert nil) (buffer ...) (org-levels-open ...)
>> (dummy ...) (date ...) (date ...) (dummy ...) (title ...) (dummy ...)
>> (html-table-tag ...) (quote-re0 ...) (quote-re ...) ...) (let (...)
>> (org-unmodified ...)) (message "Exporting...")
>> (org-init-section-numbers) (setq org-lparse-output-buffer buffer)
>> (set-buffer org-lparse-output-buffer) (let (...) (erase-buffer))
>> (fundamental-mode) (org-install-letbind) (and (fboundp ...)
>> (set-buffer-file-coding-system coding-system-for-write)) (let
>> (... ...) (mapc ... org-export-plist-vars) (setq umax ...) (setq
>> umax-toc ...) (setq org-lparse-opt-plist ...) (when ... ...) (unless
>> body-only ... ...) (setq head-count 0) (org-init-section-numbers)
>> (org-lparse-begin-paragraph) (while ... ...) (when ... ...)
>> (org-lparse-end-level 1 umax) (when ... ...) (org-lparse-end
>> ... opt-plist) (unless body-only ...) (org-lparse-end ...) (when
>> org-lparse-collect-buffer ...) (goto-char ...) (or ... ...) (cond
>> ... ... ...)))
>>   org-do-lparse(3 hidden nil nil nil nil)
>>   (prog1 (org-do-lparse arg hidden ext-plist to-buffer body-only
>> pub-dir) (remove-hook (quote org-export-preprocess-hook) (quote
>> org-lparse-strip-experimental-blocks-maybe)) (remove-hook (quote
>> org-export-preprocess-after-blockquote-hook) (quote
>> org-lparse-preprocess-after-blockquote)))
>>   (let* ((org-lparse-backend ...) (org-lparse-other-backend ...))
>> (add-hook (quote org-export-preprocess-hook) (quote
>> org-lparse-strip-experimental-blocks-maybe)) (add-hook (quote
>> org-export-preprocess-after-blockquote-hook) (quote
>> org-lparse-preprocess-after-blockquote)) (unless
>> (org-lparse-backend-is-native-p native-backend) (error "Don't know how
>> to export natively to backend %s" native-backend)) (unless (or
>> ... ...) (error "Don't know how to export to backend %s %s"
>> target-backend ...)) (run-hooks (quote org-export-first-hook)) (prog1
>> (org-do-lparse arg hidden ext-plist to-buffer body-only pub-dir)
>> (remove-hook ... ...) (remove-hook ... ...)))
>>   org-lparse("odt" "odt" 3 hidden)
>>   org-lparse-batch("odt")
>>   org-export-as-odt-batch()
>>   command-line-1(("--load=/home/aldrichtr/.emacs" "--visit=./test.org"
>> "--funcall" "org-export-as-odt-batch"))
>>   command-line()
>>   normal-top-level()
>>
>> aldrichtr@liberty:/tmp/export-process
>> $ ls
>> test.odt
>> aldrichtr@liberty:/tmp/export-process
>> $
>>
>>
>>

-- 

bug#13254: org-odt: Batch exports creates data loss, deletes original org file

[Bastien]

Hi Jambunathan,

Jambunathan K <kjambunathan@gmail.com> writes:

> I have pushed a fix to my private branch (see below).  Please merge both
> `maint' AND `master' branches.

Done.  Thanks a lot for continuing this work!

-- 
 Bastien

bug#13254: org-odt: Batch exports creates data loss, deletes original org file

[Glenn Morris]

Please can we have the relevant patch installed in emacs-24.

bug#13254: org-odt: Batch exports creates data loss, deletes original org file

[Bastien]

Hi Glenn,

Glenn Morris <rgm@gnu.org> writes:

> Please can we have the relevant patch installed in emacs-24.

I plan to release Org 7.9.3 before the end of the week, most
probably on sunday eve.  I will do the merge then.

-- 
 Bastien