* Re: Change DOCTYPE declaration? [not found] <20101117130409.773797d2amscopub-mail@yahoo.com@dove.localdomain> @ 2010-11-17 18:34 ` Juan Pechiar 2010-11-17 20:23 ` Uriel Avalos [not found] ` <20101117152308.63473cd6amscopub-mail@yahoo.com@dove.localdomain> 0 siblings, 2 replies; 8+ messages in thread From: Juan Pechiar @ 2010-11-17 18:34 UTC (permalink / raw) To: Uriel Avalos; +Cc: emacs-orgmode Hi, The DOCTYPE declaration is hardcoded inside org-html.el You may change it by defining a hook and modifying the generated HTML. Have a look at the following message, where they get rid of the declaration: http://lists.gnu.org/archive/html/emacs-orgmode/2010-06/msg00063.html you may add some 'insert' there with your own declaration. Regards, .j. On Wed, Nov 17, 2010 at 01:04:09PM -0500, Uriel Avalos wrote: > How do I change the doctype declaration? > > Is there an export option or variable I can set? I tried searching > for the variable. Perhaps I'm using a version of orgmode that's too > old? > > The only thing I could find was org-export-html-xml-declaration but > that's not the same thing. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Change DOCTYPE declaration? 2010-11-17 18:34 ` Change DOCTYPE declaration? Juan Pechiar @ 2010-11-17 20:23 ` Uriel Avalos [not found] ` <20101117152308.63473cd6amscopub-mail@yahoo.com@dove.localdomain> 1 sibling, 0 replies; 8+ messages in thread From: Uriel Avalos @ 2010-11-17 20:23 UTC (permalink / raw) To: emacs-orgmode Thanks for the reply. After some monkeying around, I found I could do this: (add-hook 'org-export-html-final-hook (lambda () (let ((kill-whole-line t)) (goto-char (point-min)) (next-line) (kill-line 2) (insert "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\" \"http://www.w3.org/TR/html4/strict.dtd\">\n") ) ) ) To undo it, I can call this: (setq org-export-html-final-hook nil) However, one question, the above sets the doctype GLOBALLY. Is there a way to do set this automagically per file? (I.e., some kind of file-specific export option) On Wed, 17 Nov 2010 16:34:27 -0200 Juan Pechiar <juan@pechiar.com> wrote: > Hi, > > The DOCTYPE declaration is hardcoded inside org-html.el > > You may change it by defining a hook and modifying the generated HTML. > Have a look at the following message, where they get rid of the > declaration: > > http://lists.gnu.org/archive/html/emacs-orgmode/2010-06/msg00063.html > > you may add some 'insert' there with your own declaration. > > Regards, > .j. > > On Wed, Nov 17, 2010 at 01:04:09PM -0500, Uriel Avalos wrote: > > How do I change the doctype declaration? > > > > Is there an export option or variable I can set? I tried searching > > for the variable. Perhaps I'm using a version of orgmode that's too > > old? > > > > The only thing I could find was org-export-html-xml-declaration but > > that's not the same thing. ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <20101117152308.63473cd6amscopub-mail@yahoo.com@dove.localdomain>]
* Re: Change DOCTYPE declaration? [not found] ` <20101117152308.63473cd6amscopub-mail@yahoo.com@dove.localdomain> @ 2010-11-17 21:45 ` Juan Pechiar [not found] ` <27942.1290032705@gamaville.americas.hpqcorp.net> ` (2 more replies) 0 siblings, 3 replies; 8+ messages in thread From: Juan Pechiar @ 2010-11-17 21:45 UTC (permalink / raw) To: Uriel Avalos; +Cc: emacs-orgmode Yo can set variables on a per-file basis. Check EXPORT OPTIONS on the manual. You can set variables there (but not add hooks), so maybe something like this works: #+begin_src emacs-lisp ;; in your .emacs file: (add-hook 'org-export-html-final-hook (lambda () (if ( (boundp 'uriel-change-doctype) ) (let ((kill-whole-line t)) (goto-char (point-min)) (next-line) (kill-line 2) (insert "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\" \"http://www.w3.org/TR/html4/strict.dtd\">\n") ) ) ) ) #+end_src So the hook body will only execute if uriel-change-doctype is bound to some value. Then, on your document, include #+BIND uriel-change-doctype t Not tested, good luck! .j. On Wed, Nov 17, 2010 at 03:23:08PM -0500, Uriel Avalos wrote: > Thanks for the reply. After some monkeying around, I found I could do this: > > (add-hook 'org-export-html-final-hook > (lambda () > (let ((kill-whole-line t)) > (goto-char (point-min)) > (next-line) > (kill-line 2) > (insert "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\" \"http://www.w3.org/TR/html4/strict.dtd\">\n") > ) > ) > ) > > To undo it, I can call this: > > (setq org-export-html-final-hook nil) > > However, one question, the above sets the doctype GLOBALLY. Is there > a way to do set this automagically per file? (I.e., some kind of > file-specific export option) > > Juan Pechiar <juan@pechiar.com> wrote: > > > The DOCTYPE declaration is hardcoded inside org-html.el > > > > You may change it by defining a hook and modifying the generated HTML. > > Have a look at the following message, where they get rid of the > > declaration: > > > > http://lists.gnu.org/archive/html/emacs-orgmode/2010-06/msg00063.html > > > > you may add some 'insert' there with your own declaration. > > > > On Wed, Nov 17, 2010 at 01:04:09PM -0500, Uriel Avalos wrote: > > > How do I change the doctype declaration? ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <27942.1290032705@gamaville.americas.hpqcorp.net>]
* Re: Change DOCTYPE declaration? [not found] ` <27942.1290032705@gamaville.americas.hpqcorp.net> @ 2010-11-17 23:02 ` Juan Pechiar 0 siblings, 0 replies; 8+ messages in thread From: Juan Pechiar @ 2010-11-17 23:02 UTC (permalink / raw) To: Nick Dokos; +Cc: emacs-orgmode On Wed, Nov 17, 2010 at 05:25:05PM -0500, Nick Dokos wrote: > #+BIND: uriel-change-doctype t > > but a good (if not scalable) solution to the problem. > > I have a question however: why is it that hooks can't be set using > this mechanism? From my limited understanding, the #+BIND directive is for binding variables. For correctly adding a hook you must call add-hook, which adds a function to the corresponding hook list. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Change DOCTYPE declaration? 2010-11-17 21:45 ` Juan Pechiar [not found] ` <27942.1290032705@gamaville.americas.hpqcorp.net> @ 2010-11-18 15:35 ` Uriel Avalos [not found] ` <20101118103550.33442d0eamscopub-mail@yahoo.com@dove.localdomain> 2 siblings, 0 replies; 8+ messages in thread From: Uriel Avalos @ 2010-11-18 15:35 UTC (permalink / raw) To: emacs-orgmode On Wed, 17 Nov 2010 19:45:06 -0200 Juan Pechiar <juan@pechiar.com> wrote: > Yo can set variables on a per-file basis. > > Check EXPORT OPTIONS on the manual. You can set variables there (but > not add hooks), so maybe something like this works: > > #+begin_src emacs-lisp > > ;; in your .emacs file: > > (add-hook 'org-export-html-final-hook > (lambda () > (if ( (boundp 'uriel-change-doctype) ) > > (let ((kill-whole-line t)) > (goto-char (point-min)) > (next-line) > (kill-line 2) > (insert "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\" \"http://www.w3.org/TR/html4/strict.dtd\">\n") > ) > ) > ) > > ) > > #+end_src > > So the hook body will only execute if uriel-change-doctype is bound to > some value. > > Then, on your document, include > > #+BIND uriel-change-doctype t > > Not tested, good luck! > > .j. > > > On Wed, Nov 17, 2010 at 03:23:08PM -0500, Uriel Avalos wrote: > > Thanks for the reply. After some monkeying around, I found I could do this: > > > > (add-hook 'org-export-html-final-hook > > (lambda () > > (let ((kill-whole-line t)) > > (goto-char (point-min)) > > (next-line) > > (kill-line 2) > > (insert "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\" \"http://www.w3.org/TR/html4/strict.dtd\">\n") > > ) > > ) > > ) > > > > To undo it, I can call this: > > > > (setq org-export-html-final-hook nil) > > > > However, one question, the above sets the doctype GLOBALLY. Is there > > a way to do set this automagically per file? (I.e., some kind of > > file-specific export option) > > > > Juan Pechiar <juan@pechiar.com> wrote: > > > > > The DOCTYPE declaration is hardcoded inside org-html.el > > > > > > You may change it by defining a hook and modifying the generated HTML. > > > Have a look at the following message, where they get rid of the > > > declaration: > > > > > > http://lists.gnu.org/archive/html/emacs-orgmode/2010-06/msg00063.html > > > > > > you may add some 'insert' there with your own declaration. > > > > > > On Wed, Nov 17, 2010 at 01:04:09PM -0500, Uriel Avalos wrote: > > > > How do I change the doctype declaration? Great. It's working like a charm. If uriel-change-doctype is not defined, it leaves the doctype alone. Otherwise, it changes it. (Note that there's a small typo in the code, an extra parentheses before var but it otherwise works very well.) Thanks! The only problem is that #+BIND is not working. I tried setting org-export-allow-BIND to t and it still does not work. Ideas? ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <20101118103550.33442d0eamscopub-mail@yahoo.com@dove.localdomain>]
* Re: Change DOCTYPE declaration? [not found] ` <20101118103550.33442d0eamscopub-mail@yahoo.com@dove.localdomain> @ 2010-11-18 15:51 ` Uriel Avalos 2010-11-18 15:52 ` Juan Pechiar 1 sibling, 0 replies; 8+ messages in thread From: Uriel Avalos @ 2010-11-18 15:51 UTC (permalink / raw) Cc: emacs-orgmode On Thu, 18 Nov 2010 10:35:50 -0500 Uriel Avalos <amscopub-mail@yahoo.com> wrote: > On Wed, 17 Nov 2010 19:45:06 -0200 > Juan Pechiar <juan@pechiar.com> wrote: > > > Yo can set variables on a per-file basis. > > > > Check EXPORT OPTIONS on the manual. You can set variables there (but > > not add hooks), so maybe something like this works: > > > > #+begin_src emacs-lisp > > > > ;; in your .emacs file: > > > > (add-hook 'org-export-html-final-hook > > (lambda () > > (if ( (boundp 'uriel-change-doctype) ) > > > > (let ((kill-whole-line t)) > > (goto-char (point-min)) > > (next-line) > > (kill-line 2) > > (insert "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\" \"http://www.w3.org/TR/html4/strict.dtd\">\n") > > ) > > ) > > ) > > > > ) > > > > #+end_src > > > > So the hook body will only execute if uriel-change-doctype is bound to > > some value. > > > > Then, on your document, include > > > > #+BIND uriel-change-doctype t > > > > Not tested, good luck! > > > > .j. > > > > > > On Wed, Nov 17, 2010 at 03:23:08PM -0500, Uriel Avalos wrote: > > > Thanks for the reply. After some monkeying around, I found I could do this: > > > > > > (add-hook 'org-export-html-final-hook > > > (lambda () > > > (let ((kill-whole-line t)) > > > (goto-char (point-min)) > > > (next-line) > > > (kill-line 2) > > > (insert "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\" \"http://www.w3.org/TR/html4/strict.dtd\">\n") > > > ) > > > ) > > > ) > > > > > > To undo it, I can call this: > > > > > > (setq org-export-html-final-hook nil) > > > > > > However, one question, the above sets the doctype GLOBALLY. Is there > > > a way to do set this automagically per file? (I.e., some kind of > > > file-specific export option) > > > > > > Juan Pechiar <juan@pechiar.com> wrote: > > > > > > > The DOCTYPE declaration is hardcoded inside org-html.el > > > > > > > > You may change it by defining a hook and modifying the generated HTML. > > > > Have a look at the following message, where they get rid of the > > > > declaration: > > > > > > > > http://lists.gnu.org/archive/html/emacs-orgmode/2010-06/msg00063.html > > > > > > > > you may add some 'insert' there with your own declaration. > > > > > > > > On Wed, Nov 17, 2010 at 01:04:09PM -0500, Uriel Avalos wrote: > > > > > How do I change the doctype declaration? > > Great. It's working like a charm. If uriel-change-doctype is not defined, it leaves the doctype alone. Otherwise, it changes it. (Note that there's a small typo in the code, an extra parentheses before var but it otherwise works very well.) Thanks! > > The only problem is that #+BIND is not working. I tried setting org-export-allow-BIND to t and it still does not work. Ideas? > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode Nevermind, I forgot the : in #+BIND. DOH! It's working fine now. For the reference, here's what works: In .emacs: (add-hook 'org-export-html-final-hook (lambda () (if (boundp 'uriel-mathml-doctype) (let ((kill-whole-line t)) (goto-char (point-min)) (next-line) (kill-line 2) (insert "<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.1 plus MathML 2.0 plus SVG 1.1//EN\" \"http://www.w3.org/2002/04/xhtml-math-svg/xhtml-math-svg.dtd\">\n") ) ) ) ) Then in the file: #+BIND: uriel-mathml-doctype t ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Change DOCTYPE declaration? [not found] ` <20101118103550.33442d0eamscopub-mail@yahoo.com@dove.localdomain> 2010-11-18 15:51 ` Uriel Avalos @ 2010-11-18 15:52 ` Juan Pechiar 1 sibling, 0 replies; 8+ messages in thread From: Juan Pechiar @ 2010-11-18 15:52 UTC (permalink / raw) To: Uriel Avalos; +Cc: emacs-orgmode On Thu, Nov 18, 2010 at 10:35:50AM -0500, Uriel Avalos wrote: > The only problem is that #+BIND is not working. I tried setting > org-export-allow-BIND to t and it still does not work. Ideas? Did you C-c C-c over (any of the) option headers? This is required for org-mode to re-parse all options in the file. http://orgmode.org/manual/The-very-busy-C_002dc-C_002dc-key.html#The-very-busy-C_002dc-C_002dc-key .j. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Change DOCTYPE declaration? @ 2010-11-17 18:04 Uriel Avalos 0 siblings, 0 replies; 8+ messages in thread From: Uriel Avalos @ 2010-11-17 18:04 UTC (permalink / raw) To: emacs-orgmode How do I change the doctype declaration? Is there an export option or variable I can set? I tried searching for the variable. Perhaps I'm using a version of orgmode that's too old? The only thing I could find was org-export-html-xml-declaration but that's not the same thing. ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2010-11-18 15:52 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- [not found] <20101117130409.773797d2amscopub-mail@yahoo.com@dove.localdomain> 2010-11-17 18:34 ` Change DOCTYPE declaration? Juan Pechiar 2010-11-17 20:23 ` Uriel Avalos [not found] ` <20101117152308.63473cd6amscopub-mail@yahoo.com@dove.localdomain> 2010-11-17 21:45 ` Juan Pechiar [not found] ` <27942.1290032705@gamaville.americas.hpqcorp.net> 2010-11-17 23:02 ` Juan Pechiar 2010-11-18 15:35 ` Uriel Avalos [not found] ` <20101118103550.33442d0eamscopub-mail@yahoo.com@dove.localdomain> 2010-11-18 15:51 ` Uriel Avalos 2010-11-18 15:52 ` Juan Pechiar 2010-11-17 18:04 Uriel Avalos
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).