* org-babel export latex problem
@ 2012-02-02 22:05 Riccardo Romoli
2012-02-03 4:40 ` Thomas S. Dye
0 siblings, 1 reply; 6+ messages in thread
From: Riccardo Romoli @ 2012-02-02 22:05 UTC (permalink / raw)
To: emacs-orgmode
Hi, I'm new of these list and of the org-babel world.
I need to use both LaTeX and R, so I write the R code within an src
block:
#+begin_src R :results output silent :exports none
library(chemometrics)
library(MASS)
library(lattice)
#+end_src
When I export to LaTex (C-c C-e l) the R code I wrote, this is the
result:
\begin{verbatim}
library(chemometrics)
library(MASS)
library(lattice)
\end{verbatim}
How could I not display the result of the R computation? In the org-
manual (chapter 14 ) I read that what I need should be done using:
:results output silent :exports none
but despite I use this option nothing change.
Do you have any suggestion??
Best
Riccardo
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: org-babel export latex problem
2012-02-02 22:05 org-babel export latex problem Riccardo Romoli
@ 2012-02-03 4:40 ` Thomas S. Dye
2012-02-03 11:43 ` Riccardo Romoli
0 siblings, 1 reply; 6+ messages in thread
From: Thomas S. Dye @ 2012-02-03 4:40 UTC (permalink / raw)
To: Riccardo Romoli; +Cc: emacs-orgmode
Riccardo Romoli <ric.romoli@gmail.com> writes:
> Hi, I'm new of these list and of the org-babel world.
> I need to use both LaTeX and R, so I write the R code within an src
> block:
>
> #+begin_src R :results output silent :exports none
> library(chemometrics)
> library(MASS)
> library(lattice)
> #+end_src
>
> When I export to LaTex (C-c C-e l) the R code I wrote, this is the
> result:
>
> \begin{verbatim}
> library(chemometrics)
> library(MASS)
> library(lattice)
> \end{verbatim}
>
> How could I not display the result of the R computation? In the org-
> manual (chapter 14 ) I read that what I need should be done using:
>
> :results output silent :exports none
>
> but despite I use this option nothing change.
>
> Do you have any suggestion??
>
> Best
> Riccardo
>
>
Aloha Riccardo,
What version of Org mode are you using?
All the best,
Tom
--
Thomas S. Dye
http://www.tsdye.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: org-babel export latex problem
2012-02-03 4:40 ` Thomas S. Dye
@ 2012-02-03 11:43 ` Riccardo Romoli
2012-02-03 12:11 ` suvayu ali
2012-02-03 15:21 ` Thomas S. Dye
0 siblings, 2 replies; 6+ messages in thread
From: Riccardo Romoli @ 2012-02-03 11:43 UTC (permalink / raw)
To: Thomas S. Dye; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1045 bytes --]
The version is 6.33x
Best
2012/2/3 Thomas S. Dye <tsd@tsdye.com>
> Riccardo Romoli <ric.romoli@gmail.com> writes:
>
> > Hi, I'm new of these list and of the org-babel world.
> > I need to use both LaTeX and R, so I write the R code within an src
> > block:
> >
> > #+begin_src R :results output silent :exports none
> > library(chemometrics)
> > library(MASS)
> > library(lattice)
> > #+end_src
> >
> > When I export to LaTex (C-c C-e l) the R code I wrote, this is the
> > result:
> >
> > \begin{verbatim}
> > library(chemometrics)
> > library(MASS)
> > library(lattice)
> > \end{verbatim}
> >
> > How could I not display the result of the R computation? In the org-
> > manual (chapter 14 ) I read that what I need should be done using:
> >
> > :results output silent :exports none
> >
> > but despite I use this option nothing change.
> >
> > Do you have any suggestion??
> >
> > Best
> > Riccardo
> >
> >
> Aloha Riccardo,
>
> What version of Org mode are you using?
>
> All the best,
> Tom
> --
> Thomas S. Dye
> http://www.tsdye.com
>
[-- Attachment #2: Type: text/html, Size: 1711 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: org-babel export latex problem
2012-02-03 11:43 ` Riccardo Romoli
@ 2012-02-03 12:11 ` suvayu ali
2012-02-03 15:21 ` Thomas S. Dye
1 sibling, 0 replies; 6+ messages in thread
From: suvayu ali @ 2012-02-03 12:11 UTC (permalink / raw)
To: Riccardo Romoli; +Cc: emacs-orgmode
On Fri, Feb 3, 2012 at 12:43, Riccardo Romoli <ric.romoli@gmail.com> wrote:
> The version is 6.33x
That is way too old, I believe org-babel is a much newer feature. At
least its more mature now. Try one of the newer releases like 7.8.03.
<http://orgmode.org/w/?p=org-mode.git;a=commit;h=2b3534a81f6f4c925f55ed7aaec31ead6f400577>
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: org-babel export latex problem
2012-02-03 11:43 ` Riccardo Romoli
2012-02-03 12:11 ` suvayu ali
@ 2012-02-03 15:21 ` Thomas S. Dye
2012-02-04 22:43 ` Riccardo Romoli
1 sibling, 1 reply; 6+ messages in thread
From: Thomas S. Dye @ 2012-02-03 15:21 UTC (permalink / raw)
To: Riccardo Romoli; +Cc: emacs-orgmode@gnu.org
[-- Attachment #1: Type: text/plain, Size: 1238 bytes --]
The current version is 7.8. Could you update and see if the problem persists?
Tom
Sent from my iPhone
On Feb 3, 2012, at 1:43 AM, Riccardo Romoli <ric.romoli@gmail.com> wrote:
> The version is 6.33x
>
> Best
>
> 2012/2/3 Thomas S. Dye <tsd@tsdye.com>
> Riccardo Romoli <ric.romoli@gmail.com> writes:
>
> > Hi, I'm new of these list and of the org-babel world.
> > I need to use both LaTeX and R, so I write the R code within an src
> > block:
> >
> > #+begin_src R :results output silent :exports none
> > library(chemometrics)
> > library(MASS)
> > library(lattice)
> > #+end_src
> >
> > When I export to LaTex (C-c C-e l) the R code I wrote, this is the
> > result:
> >
> > \begin{verbatim}
> > library(chemometrics)
> > library(MASS)
> > library(lattice)
> > \end{verbatim}
> >
> > How could I not display the result of the R computation? In the org-
> > manual (chapter 14 ) I read that what I need should be done using:
> >
> > :results output silent :exports none
> >
> > but despite I use this option nothing change.
> >
> > Do you have any suggestion??
> >
> > Best
> > Riccardo
> >
> >
> Aloha Riccardo,
>
> What version of Org mode are you using?
>
> All the best,
> Tom
> --
> Thomas S. Dye
> http://www.tsdye.com
>
[-- Attachment #2: Type: text/html, Size: 2071 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: org-babel export latex problem
2012-02-03 15:21 ` Thomas S. Dye
@ 2012-02-04 22:43 ` Riccardo Romoli
0 siblings, 0 replies; 6+ messages in thread
From: Riccardo Romoli @ 2012-02-04 22:43 UTC (permalink / raw)
To: Thomas S. Dye; +Cc: emacs-orgmode@gnu.org
[-- Attachment #1: Type: text/plain, Size: 1406 bytes --]
Thanks for the suggestion, the update fix the problem.
Best
Riccardo
2012/2/3 Thomas S. Dye <tsd@tsdye.com>
> The current version is 7.8. Could you update and see if the problem
> persists?
>
> Tom
>
> Sent from my iPhone
>
> On Feb 3, 2012, at 1:43 AM, Riccardo Romoli <ric.romoli@gmail.com> wrote:
>
> The version is 6.33x
>
> Best
>
> 2012/2/3 Thomas S. Dye <tsd@tsdye.com>
>
>> Riccardo Romoli <ric.romoli@gmail.com> writes:
>>
>> > Hi, I'm new of these list and of the org-babel world.
>> > I need to use both LaTeX and R, so I write the R code within an src
>> > block:
>> >
>> > #+begin_src R :results output silent :exports none
>> > library(chemometrics)
>> > library(MASS)
>> > library(lattice)
>> > #+end_src
>> >
>> > When I export to LaTex (C-c C-e l) the R code I wrote, this is the
>> > result:
>> >
>> > \begin{verbatim}
>> > library(chemometrics)
>> > library(MASS)
>> > library(lattice)
>> > \end{verbatim}
>> >
>> > How could I not display the result of the R computation? In the org-
>> > manual (chapter 14 ) I read that what I need should be done using:
>> >
>> > :results output silent :exports none
>> >
>> > but despite I use this option nothing change.
>> >
>> > Do you have any suggestion??
>> >
>> > Best
>> > Riccardo
>> >
>> >
>> Aloha Riccardo,
>>
>> What version of Org mode are you using?
>>
>> All the best,
>> Tom
>> --
>> Thomas S. Dye
>> http://www.tsdye.com
>>
>
>
[-- Attachment #2: Type: text/html, Size: 2474 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-02-04 22:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-02 22:05 org-babel export latex problem Riccardo Romoli
2012-02-03 4:40 ` Thomas S. Dye
2012-02-03 11:43 ` Riccardo Romoli
2012-02-03 12:11 ` suvayu ali
2012-02-03 15:21 ` Thomas S. Dye
2012-02-04 22:43 ` Riccardo Romoli
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).