* Emacs notmuch-show consistently reports "End of file during parsing" @ 2012-05-23 14:23 Tellman 2012-05-23 15:25 ` Tomi Ollila 0 siblings, 1 reply; 7+ messages in thread From: Tellman @ 2012-05-23 14:23 UTC (permalink / raw) To: notmuch I recently installed notmuch on my OS X laptop. Searching works fine--it seems to find all my mail and displays the subject lines, dates, etc., correctly. However, the emacs mode is unable to display the contents of any of the messages. I see the subjects correctly, but when I try to view the actual message, I see: "End of file during parsing" and an empty page. I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11 installed via MacPorts. Does anyone have an idea what might be causing this? Thanks, --Ed Tellman ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing" 2012-05-23 14:23 Emacs notmuch-show consistently reports "End of file during parsing" Tellman @ 2012-05-23 15:25 ` Tomi Ollila 2012-05-23 18:34 ` Tellman 0 siblings, 1 reply; 7+ messages in thread From: Tomi Ollila @ 2012-05-23 15:25 UTC (permalink / raw) To: Tellman, notmuch On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: > I recently installed notmuch on my OS X laptop. Searching works fine--it > seems to find all my mail and displays the subject lines, dates, etc., > correctly. > However, the emacs mode is unable to display the contents of any of the > messages. I see the subjects correctly, but when I try to view the > actual message, I see: "End of file during parsing" and an empty page. > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11 > installed via MacPorts. > > Does anyone have an idea what might be causing this? What version of gmime is installed ? Do the following on command line (the l33t... below is actually a date 'Tue May 15 23:10:56 2012 UTC'). notmuch search --output=threads 1337123456.. and then execute notmuch show --format=json thread:000000000000XXXX (take the XXX from the thread list outputted before -- try many of those and see whether something fails during execution...). > Thanks, > --Ed Tellman Tomi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing" 2012-05-23 15:25 ` Tomi Ollila @ 2012-05-23 18:34 ` Tellman 2012-05-24 6:04 ` Tomi Ollila 0 siblings, 1 reply; 7+ messages in thread From: Tellman @ 2012-05-23 18:34 UTC (permalink / raw) To: Tomi Ollila; +Cc: notmuch@notmuchmail.org Thanks for the quick response. I have gmime 2.4 installed. I tried the search and show commands and the responses all looked OK to me, although I wasn't quite sure what to look for. I didn't see any error messages. Here's a sample: [[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]78ca391a1b82:gmime I tried a bunch of other ones, and they all looked similar. Thanks, --Ed On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote: > On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: > > > I recently installed notmuch on my OS X laptop. Searching works fine--it > > seems to find all my mail and displays the subject lines, dates, etc., > > correctly. > > > However, the emacs mode is unable to display the contents of any of the > > messages. I see the subjects correctly, but when I try to view the > > actual message, I see: "End of file during parsing" and an empty page. > > > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11 > > installed via MacPorts. > > > > Does anyone have an idea what might be causing this? > > What version of gmime is installed ? > > Do the following on command line (the l33t... below is > actually a date 'Tue May 15 23:10:56 2012 UTC'). > > notmuch search --output=threads 1337123456.. > > and then execute > > notmuch show --format=json thread:000000000000XXXX > > (take the XXX from the thread list outputted before > -- try many of those and see whether something fails > during execution...). > > > Thanks, > > --Ed Tellman > > Tomi ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing" 2012-05-23 18:34 ` Tellman @ 2012-05-24 6:04 ` Tomi Ollila 2012-05-25 15:53 ` Tellman 0 siblings, 1 reply; 7+ messages in thread From: Tomi Ollila @ 2012-05-24 6:04 UTC (permalink / raw) To: Tellman; +Cc: notmuch@notmuchmail.org On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: > Thanks for the quick response. > > I have gmime 2.4 installed. Gmime 2.4.x -- what is the value if 'x' :D ? > I tried the search and show commands and the responses all looked OK to > me, although I wasn't quite sure what to look for. I didn't see any > error messages. > Here's a sample: > > (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]78ca391a1b82:gmime > > I tried a bunch of other ones, and they all looked similar. Putting cursor /here (use monospace font ;) and entering C-x C-e parses ...... | | V (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]] ...... the message OK... You could next try to enter id:"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com" into your notmuch-hello search bar and see if that message shows ok. If that does then just some threads makes the parsing fail. I have had similar experience: when using gmime 2.4.21 some threads (note: not all) make notmuch segfault. Updating to 2.4.25 fixed that problem. You may have the same problem or not. > > Thanks, > --Ed Tomi > > > On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote: >> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: >> >> > I recently installed notmuch on my OS X laptop. Searching works fine--it >> > seems to find all my mail and displays the subject lines, dates, etc., >> > correctly. >> >> > However, the emacs mode is unable to display the contents of any of the >> > messages. I see the subjects correctly, but when I try to view the >> > actual message, I see: "End of file during parsing" and an empty page. >> >> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11 >> > installed via MacPorts. >> > >> > Does anyone have an idea what might be causing this? >> >> What version of gmime is installed ? >> >> Do the following on command line (the l33t... below is >> actually a date 'Tue May 15 23:10:56 2012 UTC'). >> >> notmuch search --output=threads 1337123456.. >> >> and then execute >> >> notmuch show --format=json thread:000000000000XXXX >> >> (take the XXX from the thread list outputted before >> -- try many of those and see whether something fails >> during execution...). >> >> > Thanks, >> > --Ed Tellman >> >> Tomi > _______________________________________________ > notmuch mailing list > notmuch@notmuchmail.org > http://notmuchmail.org/mailman/listinfo/notmuch ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing" 2012-05-24 6:04 ` Tomi Ollila @ 2012-05-25 15:53 ` Tellman 2012-05-25 17:03 ` Tomi Ollila 0 siblings, 1 reply; 7+ messages in thread From: Tellman @ 2012-05-25 15:53 UTC (permalink / raw) To: Tomi Ollila; +Cc: notmuch@notmuchmail.org I installed gmime 2.4.28 and notmuch 0.12 and that combination seems to work fine. I'm not sure what the problem was, but it seems OK now. Thanks for your help. --Ed On Wed, May 23, 2012 at 11:04:32PM -0700, Tomi Ollila wrote: > On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: > > > Thanks for the quick response. > > > > I have gmime 2.4 installed. > > Gmime 2.4.x -- what is the value if 'x' :D ? > > > I tried the search and show commands and the responses all looked OK to > > me, although I wasn't quite sure what to look for. I didn't see any > > error messages. > > > Here's a sample: > > > > (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]78ca391a1b82:gmime > > > > I tried a bunch of other ones, and they all looked similar. > > > Putting cursor /here (use monospace font ;) and entering C-x C-e parses ...... > | > | > V > (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]] > > ...... the message OK... You could next try to enter > > id:"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com" > > into your notmuch-hello search bar and see if that message shows ok. > > If that does then just some threads makes the parsing fail. > > I have had similar experience: when using gmime 2.4.21 some threads > (note: not all) make notmuch segfault. Updating to 2.4.25 fixed that > problem. You may have the same problem or not. > > > > > Thanks, > > --Ed > > Tomi > > > > > > > On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote: > >> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: > >> > >> > I recently installed notmuch on my OS X laptop. Searching works fine--it > >> > seems to find all my mail and displays the subject lines, dates, etc., > >> > correctly. > >> > >> > However, the emacs mode is unable to display the contents of any of the > >> > messages. I see the subjects correctly, but when I try to view the > >> > actual message, I see: "End of file during parsing" and an empty page. > >> > >> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11 > >> > installed via MacPorts. > >> > > >> > Does anyone have an idea what might be causing this? > >> > >> What version of gmime is installed ? > >> > >> Do the following on command line (the l33t... below is > >> actually a date 'Tue May 15 23:10:56 2012 UTC'). > >> > >> notmuch search --output=threads 1337123456.. > >> > >> and then execute > >> > >> notmuch show --format=json thread:000000000000XXXX > >> > >> (take the XXX from the thread list outputted before > >> -- try many of those and see whether something fails > >> during execution...). > >> > >> > Thanks, > >> > --Ed Tellman > >> > >> Tomi > > _______________________________________________ > > notmuch mailing list > > notmuch@notmuchmail.org > > http://notmuchmail.org/mailman/listinfo/notmuch ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing" 2012-05-25 15:53 ` Tellman @ 2012-05-25 17:03 ` Tomi Ollila 2012-05-25 17:08 ` Tellman, Ed 0 siblings, 1 reply; 7+ messages in thread From: Tomi Ollila @ 2012-05-25 17:03 UTC (permalink / raw) To: Tellman; +Cc: notmuch@notmuchmail.org On Fri, May 25 2012, Tellman <edwint@amazon.com> wrote: > I installed gmime 2.4.28 and notmuch 0.12 and that combination seems to > work fine. > > I'm not sure what the problem was, but it seems OK now. Good that it works for you! Do you happen to know which version of gmime you were using previously -- http://www.macports.org/ports.php?by=library&substr=gmime shows version 2.4.23 (but that is just something that internet search presented me) > Thanks for your help. > > --Ed Tomi > > On Wed, May 23, 2012 at 11:04:32PM -0700, Tomi Ollila wrote: >> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: >> >> > Thanks for the quick response. >> > >> > I have gmime 2.4 installed. >> >> Gmime 2.4.x -- what is the value if 'x' :D ? >> >> > I tried the search and show commands and the responses all looked OK to >> > me, although I wasn't quite sure what to look for. I didn't see any >> > error messages. >> >> > Here's a sample: >> > >> > (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]]78ca391a1b82:gmime >> > >> > I tried a bunch of other ones, and they all looked similar. >> >> >> Putting cursor /here (use monospace font ;) and entering C-x C-e parses ...... >> | >> | >> V >> (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, "filename": "/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. 17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", "Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": 1, "content-type": "text/plain", "content": "hi\n"}]}, []]]] >> >> ...... the message OK... You could next try to enter >> >> id:"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com" >> >> into your notmuch-hello search bar and see if that message shows ok. >> >> If that does then just some threads makes the parsing fail. >> >> I have had similar experience: when using gmime 2.4.21 some threads >> (note: not all) make notmuch segfault. Updating to 2.4.25 fixed that >> problem. You may have the same problem or not. >> >> > >> > Thanks, >> > --Ed >> >> Tomi >> >> > >> > >> > On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote: >> >> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: >> >> >> >> > I recently installed notmuch on my OS X laptop. Searching works fine--it >> >> > seems to find all my mail and displays the subject lines, dates, etc., >> >> > correctly. >> >> >> >> > However, the emacs mode is unable to display the contents of any of the >> >> > messages. I see the subjects correctly, but when I try to view the >> >> > actual message, I see: "End of file during parsing" and an empty page. >> >> >> >> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version 0.11 >> >> > installed via MacPorts. >> >> > >> >> > Does anyone have an idea what might be causing this? >> >> >> >> What version of gmime is installed ? >> >> >> >> Do the following on command line (the l33t... below is >> >> actually a date 'Tue May 15 23:10:56 2012 UTC'). >> >> >> >> notmuch search --output=threads 1337123456.. >> >> >> >> and then execute >> >> >> >> notmuch show --format=json thread:000000000000XXXX >> >> >> >> (take the XXX from the thread list outputted before >> >> -- try many of those and see whether something fails >> >> during execution...). >> >> >> >> > Thanks, >> >> > --Ed Tellman >> >> >> >> Tomi >> > _______________________________________________ >> > notmuch mailing list >> > notmuch@notmuchmail.org >> > http://notmuchmail.org/mailman/listinfo/notmuch > _______________________________________________ > notmuch mailing list > notmuch@notmuchmail.org > http://notmuchmail.org/mailman/listinfo/notmuch ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Emacs notmuch-show consistently reports "End of file during parsing" 2012-05-25 17:03 ` Tomi Ollila @ 2012-05-25 17:08 ` Tellman, Ed 0 siblings, 0 replies; 7+ messages in thread From: Tellman, Ed @ 2012-05-25 17:08 UTC (permalink / raw) To: Tomi Ollila; +Cc: notmuch@notmuchmail.org Unfortunately, I didn't check before I replaced it. I just removed the one from mac-ports, got the most recent 2.4 version and compiled it from source. I also installed notmuch 0.12 instead of 0.11, so that may have been what fixed things. Sorry, I didn't do it more systematically to help identify the actual problem. --Ed On 5/25/12 10:03 AM, "Tomi Ollila" <tomi.ollila@iki.fi> wrote: >On Fri, May 25 2012, Tellman <edwint@amazon.com> wrote: > >> I installed gmime 2.4.28 and notmuch 0.12 and that combination seems to >> work fine. >> >> I'm not sure what the problem was, but it seems OK now. > >Good that it works for you! > >Do you happen to know which version of gmime you were using previously -- >http://www.macports.org/ports.php?by=library&substr=gmime shows version >2.4.23 (but that is just something that internet search presented me) > >> Thanks for your help. >> >> --Ed > >Tomi > > >> >> On Wed, May 23, 2012 at 11:04:32PM -0700, Tomi Ollila wrote: >>> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: >>> >>> > Thanks for the quick response. >>> > >>> > I have gmime 2.4 installed. >>> >>> Gmime 2.4.x -- what is the value if 'x' :D ? >>> >>> > I tried the search and show commands and the responses all looked OK >>>to >>> > me, although I wasn't quite sure what to look for. I didn't see any >>> > error messages. >>> >>> > Here's a sample: >>> > >>> > (json-read)[[[{"id": >>>"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", "match": true, >>>"filename": >>>"/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82 >>>.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. >>>17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed >>>Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", >>>"Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": >>>1, "content-type": "text/plain", "content": "hi\n"}]}, >>>[]]]]78ca391a1b82:gmime >>> > >>> > I tried a bunch of other ones, and they all looked similar. >>> >>> >>> Putting cursor /here (use monospace font ;) and entering C-x C-e >>>parses ...... >>> | >>> | >>> V >>> (json-read)[[[{"id": "5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com", >>>"match": true, "filename": >>>"/Users/edwint/mail/INBOX/sent/cur/1337734168.4985_755109_1.78ca391a1b82 >>>.ant.amazon.com:2,S", "timestamp": 1337734168, "date_relative": "Yest. >>>17:49", "tags": ["inbox"], "headers": {"Subject": "hi", "From": "Ed >>>Tellman <edwint@amazon.com>", "To": "edwint@amazon.com", "Cc": "", >>>"Bcc": "", "Date": "Tue, 22 May 2012 17:49:28 -0700"}, "body": [{"id": >>>1, "content-type": "text/plain", "content": "hi\n"}]}, []]]] >>> >>> ...... the message OK... You could next try to enter >>> >>> id:"5qt490ipfnbu1z.fsf@78ca391a1b82.ant.amazon.com" >>> >>> into your notmuch-hello search bar and see if that message shows ok. >>> >>> If that does then just some threads makes the parsing fail. >>> >>> I have had similar experience: when using gmime 2.4.21 some threads >>> (note: not all) make notmuch segfault. Updating to 2.4.25 fixed that >>> problem. You may have the same problem or not. >>> >>> > >>> > Thanks, >>> > --Ed >>> >>> Tomi >>> >>> > >>> > >>> > On Wed, May 23, 2012 at 08:25:26AM -0700, Tomi Ollila wrote: >>> >> On Wed, May 23 2012, Tellman <edwint@amazon.com> wrote: >>> >> >>> >> > I recently installed notmuch on my OS X laptop. Searching works >>>fine--it >>> >> > seems to find all my mail and displays the subject lines, dates, >>>etc., >>> >> > correctly. >>> >> >>> >> > However, the emacs mode is unable to display the contents of any >>>of the >>> >> > messages. I see the subjects correctly, but when I try to view >>>the >>> >> > actual message, I see: "End of file during parsing" and an empty >>>page. >>> >> >>> >> > I have OS X Lion, Emacs.App, version 23.2.1, and notmuch version >>>0.11 >>> >> > installed via MacPorts. >>> >> > >>> >> > Does anyone have an idea what might be causing this? >>> >> >>> >> What version of gmime is installed ? >>> >> >>> >> Do the following on command line (the l33t... below is >>> >> actually a date 'Tue May 15 23:10:56 2012 UTC'). >>> >> >>> >> notmuch search --output=threads 1337123456.. >>> >> >>> >> and then execute >>> >> >>> >> notmuch show --format=json thread:000000000000XXXX >>> >> >>> >> (take the XXX from the thread list outputted before >>> >> -- try many of those and see whether something fails >>> >> during execution...). >>> >> >>> >> > Thanks, >>> >> > --Ed Tellman >>> >> >>> >> Tomi >>> > _______________________________________________ >>> > notmuch mailing list >>> > notmuch@notmuchmail.org >>> > http://notmuchmail.org/mailman/listinfo/notmuch >> _______________________________________________ >> notmuch mailing list >> notmuch@notmuchmail.org >> http://notmuchmail.org/mailman/listinfo/notmuch ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-05-25 17:08 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-05-23 14:23 Emacs notmuch-show consistently reports "End of file during parsing" Tellman 2012-05-23 15:25 ` Tomi Ollila 2012-05-23 18:34 ` Tellman 2012-05-24 6:04 ` Tomi Ollila 2012-05-25 15:53 ` Tellman 2012-05-25 17:03 ` Tomi Ollila 2012-05-25 17:08 ` Tellman, Ed
Code repositories for project(s) associated with this public inbox https://yhetil.org/notmuch.git/ This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).