[PATCH 00/15] various cindex fixes + speedups

[PATCH 00/15] various cindex fixes + speedups

[Eric Wong]

Notable changes:

10/15 provides a huge speedup which will hopefully make
future developments faster.

12/15 probably obsoletes libgit2 for extindex "all" users.

13/15 can save some memory with many inboxes while making
configuration easier.

Eric Wong (15):
  cindex: fix store_repo+repo_stored on no-op
  codesearch: allow inbox count to exceed matches
  config: reject newlines consistently in dir names
  cindex: only create {-cidx_err} field on failures
  cindex: keep batch pipe for pruning SHA-256 repos
  cindex: store extensions.objectFormat with repo data
  git: share unlinked pack checking code with gcf2
  cindex: skip getpid guard for most OnDestroy use
  spawn: drop IO layer support from redirects
  cindex: speed up initial scan setup phase
  inbox: expire resources more aggressively
  git_async_cat: use git from "all" extindex if possible
  www_listing: support publicInbox.nameIsUrl
  inbox: shrink data structures for publicinbox.*.hide
  codesearch: use retry_reopen for WWW

 Documentation/public-inbox-config.pod |  19 +-
 lib/PublicInbox/CodeSearch.pm         |  54 +++--
 lib/PublicInbox/CodeSearchIdx.pm      | 286 ++++++++++++++++----------
 lib/PublicInbox/Config.pm             |  32 ++-
 lib/PublicInbox/Gcf2.pm               |  16 +-
 lib/PublicInbox/Git.pm                |  27 +--
 lib/PublicInbox/GitAsyncCat.pm        |   8 +-
 lib/PublicInbox/Inbox.pm              |  32 +--
 lib/PublicInbox/MailDiff.pm           |   3 +-
 lib/PublicInbox/SearchIdx.pm          |   5 +-
 lib/PublicInbox/Spawn.pm              |  32 +--
 lib/PublicInbox/WwwListing.pm         |  21 +-
 12 files changed, 303 insertions(+), 232 deletions(-)

[PATCH 01/15] cindex: fix store_repo+repo_stored on no-op

[Eric Wong]

It's possible to update the fingerprint for a given repo when we
have no commits to index on because they were already done for
another repo.  Thus we'll always vivify $repo_ctx->{active}
before calling store_repo since $active may've been undef.
---
 lib/PublicInbox/CodeSearchIdx.pm | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lib/PublicInbox/CodeSearchIdx.pm b/lib/PublicInbox/CodeSearchIdx.pm
index 7d696099..bd67a57e 100644
--- a/lib/PublicInbox/CodeSearchIdx.pm
+++ b/lib/PublicInbox/CodeSearchIdx.pm
@@ -613,14 +613,14 @@ sub next_repos { # OnDestroy cb
 
 sub index_done { # OnDestroy cb called when done indexing each code repo
 	my ($repo_ctx, $drs) = @_;
-	my ($self, $repo, $active) = @$repo_ctx{qw(self repo active)};
-
 	return if $DO_QUIT;
+	my ($self, $repo, $active) = @$repo_ctx{qw(self repo active)};
+	# $active may be undef here, but it's fine to vivify
 	my $n = grep { ! $repo_ctx->{shard_ok}->{$_} } keys %$active;
 	die "E: $repo->{git_dir} $n shards failed" if $n;
 	$repo_ctx->{shard_ok} = {}; # reset for future shard_done
 	$n = $repo->{shard_n};
-	$active->{$n} = undef;
+	$repo_ctx->{active}->{$n} = undef; # may vivify $repo_ctx->{active}
 	my ($c, $p) = PublicInbox::PktOp->pair;
 	$c->{ops}->{repo_stored} = [ $self, $repo_ctx, $drs ];
 	$IDX_SHARDS[$n]->wq_io_do('store_repo', [ $p->{op_p} ], $repo);

[PATCH 02/15] codesearch: allow inbox count to exceed matches

[Eric Wong]

It's entirely possible for public inboxes to have zero patches
in them, so the amount of match slots may not match match the
number of joined ekeys.
---
 lib/PublicInbox/CodeSearch.pm | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/PublicInbox/CodeSearch.pm b/lib/PublicInbox/CodeSearch.pm
index 5c5774cf..60deb2ae 100644
--- a/lib/PublicInbox/CodeSearch.pm
+++ b/lib/PublicInbox/CodeSearch.pm
@@ -69,7 +69,7 @@ sub join_data {
 W: $self->{topdir} join data for $self->{-cfg_f} missing: @m
 EOM
 		undef;
-	} elsif (@{$cur->{ekeys}} != @{$cur->{ibx2root}}) {
+	} elsif (@{$cur->{ekeys}} < @{$cur->{ibx2root}}) {
 		warn <<EOM;
 W: $self->{topdir} join data for $self->{-cfg_f} mismatched ekeys and ibx2root
 EOM

[PATCH 03/15] config: reject newlines consistently in dir names

[Eric Wong]

Explicitly drop support for "\n" in git coderepo pathnames as
we do other stuff.  Gcf2 (our libgit2 helper) was always
broken with "\n" in pathnames, and I'm not sure if cgit config
files work with them, either.  Dealing with newline characters
requires extra complexity that I'm not willing to deal with when
managing alternates files.
---
 lib/PublicInbox/Config.pm | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/lib/PublicInbox/Config.pm b/lib/PublicInbox/Config.pm
index 779e3140..6bebf790 100644
--- a/lib/PublicInbox/Config.pm
+++ b/lib/PublicInbox/Config.pm
@@ -361,12 +361,19 @@ sub parse_cgitrc {
 	cgit_repo_merge($self, $repo->{dir}, $repo) if $repo;
 }
 
+sub valid_dir ($$) {
+	my $dir = get_1($_[0], $_[1]) // return;
+	index($dir, "\n") < 0 ? $dir : do {
+		warn "E: `$_[1]=$dir' must not contain `\\n'\n";
+		undef;
+	}
+}
+
 # parse a code repo, only git is supported at the moment
 sub fill_coderepo {
 	my ($self, $nick) = @_;
 	my $pfx = "coderepo.$nick";
-	my $dir = $self->{"$pfx.dir"} // return undef; # aka "GIT_DIR"
-	my $git = PublicInbox::Git->new($dir);
+	my $git = PublicInbox::Git->new(valid_dir($self, "$pfx.dir") // return);
 	if (defined(my $cgits = $self->{"$pfx.cgiturl"})) {
 		$git->{cgit_url} = $cgits = _array($cgits);
 		$self->{"$pfx.cgiturl"} = $cgits;
@@ -450,18 +457,15 @@ sub _fill_ibx {
 		my $v = $self->{"$pfx.$k"};
 		$ibx->{$k} = $v if defined $v;
 	}
-	for my $k (qw(filter inboxdir newsgroup replyto httpbackendmax feedmax
+	for my $k (qw(filter newsgroup replyto httpbackendmax feedmax
 			indexlevel indexsequentialshard boost)) {
 		my $v = get_1($self, "$pfx.$k") // next;
 		$ibx->{$k} = $v;
 	}
 
 	# "mainrepo" is backwards compatibility:
-	my $dir = $ibx->{inboxdir} //= $self->{"$pfx.mainrepo"} // return;
-	if (index($dir, "\n") >= 0) {
-		warn "E: `$dir' must not contain `\\n'\n";
-		return;
-	}
+	my $dir = $ibx->{inboxdir} = valid_dir($self, "$pfx.inboxdir") //
+				valid_dir($self, "$pfx.mainrepo") // return;
 	for my $k (qw(obfuscate)) {
 		my $v = $self->{"$pfx.$k"} // next;
 		if (defined(my $bval = git_bool($v))) {
@@ -548,12 +552,8 @@ sub _fill_ei ($$) {
 	my ($self, $name) = @_;
 	eval { require PublicInbox::ExtSearch } or return;
 	my $pfx = "extindex.$name";
-	my $d = $self->{"$pfx.topdir"} // return;
+	my $d = valid_dir($self, "$pfx.topdir") // return;
 	-d $d or return;
-	if (index($d, "\n") >= 0) {
-		warn "E: `$d' must not contain `\\n'\n";
-		return;
-	}
 	my $es = PublicInbox::ExtSearch->new($d);
 	for my $k (qw(indexlevel indexsequentialshard)) {
 		my $v = get_1($self, "$pfx.$k") // next;
@@ -573,12 +573,8 @@ sub _fill_csrch ($$) {
 	return if $name ne '' && !valid_foo_name($name, 'cindex');
 	eval { require PublicInbox::CodeSearch } or return;
 	my $pfx = "cindex.$name";
-	my $d = $self->{"$pfx.topdir"} // return;
+	my $d = valid_dir($self, "$pfx.topdir") // return;
 	-d $d or return;
-	if (index($d, "\n") >= 0) {
-		warn "E: `$d' must not contain `\\n'\n";
-		return;
-	}
 	my $csrch = PublicInbox::CodeSearch->new($d, $self);
 	for my $k (qw(localprefix)) {
 		my $v = $self->{"$pfx.$k"} // next;

[PATCH 04/15] cindex: only create {-cidx_err} field on failures

[Eric Wong]

We only use it as a boolean flag, and there's no need to waste
space for common, non-error cases.
---
 lib/PublicInbox/CodeSearchIdx.pm | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/PublicInbox/CodeSearchIdx.pm b/lib/PublicInbox/CodeSearchIdx.pm
index bd67a57e..cf6a6efe 100644
--- a/lib/PublicInbox/CodeSearchIdx.pm
+++ b/lib/PublicInbox/CodeSearchIdx.pm
@@ -383,8 +383,8 @@ sub git_dir_hash ($) { hex(substr(sha256_hex($_[0]), 0, 8)) }
 sub _cb { # run_await cb
 	my ($pid, $cmd, undef, $opt, $cb, $self, $git, @arg) = @_;
 	return if $DO_QUIT;
-	($git->{-cidx_err} = $?) ? warn("W: @$cmd (\$?=$?)\n") :
-				$cb->($opt, $self, $git, @arg);
+	$? ? ($git->{-cidx_err} = warn("W: @$cmd (\$?=$?)\n")) :
+			$cb->($opt, $self, $git, @arg);
 }
 
 sub run_git {

[PATCH 05/15] cindex: keep batch pipe for pruning SHA-256 repos

[Eric Wong]

This fixes the case where we're running both SHA-256 and SHA-1.
There's no tests for SHA-256, yet, but the bug is pretty obvious
upon reading the code.
---
 lib/PublicInbox/CodeSearchIdx.pm | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lib/PublicInbox/CodeSearchIdx.pm b/lib/PublicInbox/CodeSearchIdx.pm
index cf6a6efe..26018232 100644
--- a/lib/PublicInbox/CodeSearchIdx.pm
+++ b/lib/PublicInbox/CodeSearchIdx.pm
@@ -1087,7 +1087,7 @@ sub run_prune { # OnDestroy when `git config extensions.objectFormat' are done
 	# ) | awk | sort | comm | cidx_read_comm()
 	my ($awk_opt, $sort_opt, $batch_opt);
 	my $comm_opt = { -C => "$TMPDIR" };
-	pipe(local $awk_opt->{0}, local $batch_opt->{1});
+	pipe(local $awk_opt->{0}, $batch_opt->{1});
 	pipe(local $sort_opt->{0}, local $awk_opt->{1});
 	pipe(local $comm_opt->{0}, local $sort_opt->{1});
 	run_await(\@AWK, $CMD_ENV, $awk_opt, \&cmd_done);

[PATCH 06/15] cindex: store extensions.objectFormat with repo data

[Eric Wong]

This will allow WWW to use a combined LeiALE-like
thing to reduce git processes.
---
 lib/PublicInbox/CodeSearch.pm    |  27 ++++--
 lib/PublicInbox/CodeSearchIdx.pm | 161 +++++++++++++++++++++----------
 2 files changed, 127 insertions(+), 61 deletions(-)

diff --git a/lib/PublicInbox/CodeSearch.pm b/lib/PublicInbox/CodeSearch.pm
index 60deb2ae..208f7528 100644
--- a/lib/PublicInbox/CodeSearch.pm
+++ b/lib/PublicInbox/CodeSearch.pm
@@ -209,15 +209,20 @@ sub roots2paths { # for diagnostics
 	\%ret;
 }
 
-sub root_oids ($$) {
+sub docids_of_git_dir ($$) {
 	my ($self, $git_dir) = @_;
 	my @ids = $self->docids_by_postlist('P'.$git_dir);
-	@ids or warn <<"";
-BUG? (non-fatal) `$git_dir' not indexed in $self->{topdir}
-
 	warn <<"" if @ids > 1;
 BUG: (non-fatal) $git_dir indexed multiple times in $self->{topdir}
 
+	@ids;
+}
+
+sub root_oids ($$) {
+	my ($self, $git_dir) = @_;
+	my @ids = docids_of_git_dir $self, $git_dir or warn <<"";
+BUG? (non-fatal) `$git_dir' not indexed in $self->{topdir}
+
 	my %ret;
 	for my $docid (@ids) {
 		my @oids = xap_terms('G', $self->xdb, $docid);
@@ -242,15 +247,21 @@ sub paths2roots {
 	\%ret;
 }
 
+sub load_ct { # retry_reopen cb
+	my ($self, $git_dir) = @_;
+	my @ids = docids_of_git_dir $self, $git_dir or return;
+	for (@ids) {
+		my $doc = $self->get_doc($_) // next;
+		return int_val($doc, CT);
+	}
+}
+
 sub load_commit_times { # each_cindex callback
 	my ($self, $todo) = @_; # todo = [ [ time, git ], [ time, git ] ...]
 	my (@pending, $rec, $dir, @ids, $doc);
 	while ($rec = shift @$todo) {
-		@ids = $self->docids_by_postlist('P'.$rec->[1]->{git_dir});
+		@ids = docids_of_git_dir $self, $rec->[1]->{git_dir};
 		if (@ids) {
-			warn <<EOM if @ids > 1;
-W: $rec->[1]->{git_dir} indexed multiple times in $self->{topdir}
-EOM
 			for (@ids) {
 				$doc = $self->get_doc($_) // next;
 				$rec->[0] = int_val($doc, CT);
diff --git a/lib/PublicInbox/CodeSearchIdx.pm b/lib/PublicInbox/CodeSearchIdx.pm
index 26018232..7580a49a 100644
--- a/lib/PublicInbox/CodeSearchIdx.pm
+++ b/lib/PublicInbox/CodeSearchIdx.pm
@@ -70,7 +70,7 @@ use PublicInbox::Git qw(%OFMT2HEXLEN);
 use PublicInbox::Compat qw(uniqstr);
 use PublicInbox::Aspawn qw(run_await);
 use Compress::Zlib qw(compress);
-use Carp ();
+use Carp qw(croak);
 use Time::Local qw(timegm);
 use autodie qw(close pipe open sysread seek sysseek send);
 our $DO_QUIT = 15; # signal number
@@ -91,11 +91,11 @@ our (
 	$NPROC,
 	$XHC, # XapClient
 	$REPO_CTX, # current repo being indexed in shards
-	$IDX_TODO, # PublicInbox::Git object arrayref
-	$GIT_TODO, # PublicInbox::Git object arrayref
+	$IDXQ, # PublicInbox::Git object arrayref
+	$SCANQ, # PublicInbox::Git object arrayref
 	%ALT_FH, # hexlen => tmp IO for TMPDIR git alternates
 	$TMPDIR, # File::Temp->newdir object for prune
-	@PRUNE_QUEUE, # GIT_DIRs to prepare for pruning
+	@PRUNEQ, # GIT_DIRs to prepare for pruning
 	%TODO, @IBXQ, @IBX,
 	@JOIN, # join(1) command for --join
 	$CMD_ENV, # env for awk(1), comm(1), sort(1) commands during prune
@@ -116,7 +116,7 @@ our $SEEN_MAX = 100000;
 # window for commits/emails to determine a inbox <-> coderepo association
 my $JOIN_WINDOW = 50000;
 
-our @PRUNE_BATCH = qw(git _ cat-file --batch-all-objects --batch-check);
+our @PRUNE_BATCH = qw(cat-file --batch-all-objects --batch-check);
 
 # TODO: do we care about committer name + email? or tree OID?
 my @FMT = qw(H P ct an ae at s b); # (b)ody must be last
@@ -210,9 +210,23 @@ sub progress {
 	$pr->($self->{git} ? ("$self->{git}->{git_dir}: ") : (), @msg, "\n");
 }
 
+sub check_objfmt_status ($$$) {
+	my ($git, $chld_err, $fmt) = @_;
+	my ($status, $sig) = ($chld_err >> 8, $chld_err & 127);
+	if (!$sig && $status == 1) { # unset, default is '' (SHA-1)
+		$fmt = 'sha1';
+	} elsif (!$sig && $status == 0) {
+		chomp($fmt ||= 'sha1');
+	}
+	$fmt // warn("git --git-dir=$git->{git_dir} config \$?=$chld_err");
+	$fmt;
+}
+
 sub store_repo { # wq_io_do, sends docid back
 	my ($self, $repo) = @_;
 	my $op_p = delete($self->{0}) // die 'BUG: no {0} op_p';
+	my $git = bless $repo, 'PublicInbox::Git';
+	my $rd = $git->popen(qw(config extensions.objectFormat));
 	$self->begin_txn_lazy;
 	$self->{xdb}->delete_document($_) for @{$repo->{to_delete}};
 	my $doc = $PublicInbox::Search::X{Document}->new;
@@ -221,6 +235,13 @@ sub store_repo { # wq_io_do, sends docid back
 	$doc->add_boolean_term('T'.'r');
 	$doc->add_boolean_term('G'.$_) for @{$repo->{roots}};
 	$doc->set_data($repo->{fp}); # \n delimited
+	my $fmt = readline($rd);
+	$rd->close;
+	$fmt = check_objfmt_status $git, $?, $fmt;
+	$OFMT2HEXLEN{$fmt} // warn <<EOM; # store unknown formats anyways
+E: unknown extensions.objectFormat=$fmt in $repo->{git_dir}
+EOM
+	$doc->add_boolean_term('H'.$fmt);
 	my $did = $repo->{docid};
 	$did ? $self->{xdb}->replace_document($did, $doc)
 		: ($did = $self->{xdb}->add_document($doc));
@@ -383,6 +404,7 @@ sub git_dir_hash ($) { hex(substr(sha256_hex($_[0]), 0, 8)) }
 sub _cb { # run_await cb
 	my ($pid, $cmd, undef, $opt, $cb, $self, $git, @arg) = @_;
 	return if $DO_QUIT;
+	return $cb->($opt, $self, $git, @arg) if $opt->{quiet};
 	$? ? ($git->{-cidx_err} = warn("W: @$cmd (\$?=$?)\n")) :
 			$cb->($opt, $self, $git, @arg);
 }
@@ -436,7 +458,7 @@ sub prep_repo ($$) {
 		delete $git->{-repo};
 		return index_next($self);
 	}
-	my $n = git_dir_hash($git->{git_dir}) % $self->{nshard};
+	my $n = git_dir_hash($git->{git_dir}) % scalar(@RDONLY_XDB);
 	my $shard = bless { %$self, shard => $n }, ref($self);
 	$repo->{shard_n} = $n;
 	delete @$shard{qw(lockfh lock_path)};
@@ -446,7 +468,7 @@ sub prep_repo ($$) {
 
 sub check_existing { # retry_reopen callback
 	my ($shard, $self, $git) = @_;
-	my @docids = $shard->docids_by_postlist('P'.$git->{git_dir});
+	my @docids = $shard->docids_of_git_dir($git->{git_dir});
 	my $docid = shift(@docids) // return get_roots($self, $git);
 	my $doc = $shard->get_doc($docid) //
 			die "BUG: no #$docid ($git->{git_dir})";
@@ -581,10 +603,10 @@ sub dump_ibx_start {
 sub index_next ($) {
 	my ($self) = @_;
 	return if $DO_QUIT;
-	if ($IDX_TODO && @$IDX_TODO) {
-		index_repo(undef, $self, shift @$IDX_TODO);
-	} elsif ($GIT_TODO && @$GIT_TODO) {
-		my $git = shift @$GIT_TODO;
+	if ($IDXQ && @$IDXQ) {
+		index_repo(undef, $self, shift @$IDXQ);
+	} elsif ($SCANQ && @$SCANQ) {
+		my $git = shift @$SCANQ;
 		my $prep_repo = PublicInbox::OnDestroy->new($$, \&prep_repo,
 							$self, $git);
 		fp_start($self, $git, $prep_repo);
@@ -631,7 +653,7 @@ sub index_repo { # run_git cb
 	my (undef, $self, $git) = @_;
 	return if $DO_QUIT;
 	return index_next($self) if $git->{-cidx_err};
-	return push(@$IDX_TODO, $git) if $REPO_CTX; # busy
+	return push(@$IDXQ, $git) if $REPO_CTX; # busy
 	my $repo = delete $git->{-repo} or return index_next($self);
 	my $roots_fh = delete $repo->{roots_fh} // die 'BUG: no {roots_fh}';
 	seek($roots_fh, 0, SEEK_SET);
@@ -755,12 +777,12 @@ sub gits_fini {
 
 sub scan_git_dirs ($) {
 	my ($self) = @_;
-	@$GIT_TODO = map { PublicInbox::Git->new($_) } @{$self->{git_dirs}};
-	$GITS_NR = @$GIT_TODO;
+	@$SCANQ = () unless $self->{-opt}->{scan};
+	$GITS_NR = @$SCANQ or return;
 	my $gits_fini = PublicInbox::OnDestroy->new($$, \&gits_fini);
-	$_->{-cidx_gits_fini} = $gits_fini for @$GIT_TODO;
+	$_->{-cidx_gits_fini} = $gits_fini for @$SCANQ;
 	if (my $drs = $TODO{dump_roots_start}) {
-		$_->{-cidx_dump_roots_start} = $drs for @$GIT_TODO;
+		$_->{-cidx_dump_roots_start} = $drs for @$SCANQ;
 	}
 	progress($self, "scanning $GITS_NR code repositories...");
 }
@@ -794,9 +816,9 @@ sub prune_commit { # via wq_io_do in IDX_SHARDS
 
 sub shards_active { # post_loop_do
 	return if $DO_QUIT;
-	return if grep(defined, $PRUNE_DONE, $GIT_TODO, $IDX_TODO) != 3;
+	return if grep(defined, $PRUNE_DONE, $SCANQ, $IDXQ) != 3;
 	return 1 if grep(defined, @$PRUNE_DONE) != @IDX_SHARDS;
-	return 1 if $GITS_NR || scalar(@$IDX_TODO) || $REPO_CTX;
+	return 1 if $GITS_NR || scalar(@$IDXQ) || $REPO_CTX;
 	return 1 if @IBXQ || keys(%TODO);
 	for my $s (grep { $_->{-wq_s1} } @IDX_SHARDS) {
 		$s->{-cidx_quit} = 1 if defined($s->{-wq_s1});
@@ -836,18 +858,8 @@ sub prep_umask ($) {
 	}
 }
 
-sub prep_alternate_end { # run_await cb for config extensions.objectFormat
-	my ($pid, $cmd, undef, $opt, $objdir, $run_prune) = @_;
-	my ($status, $sig) = ($? >> 8, $? & 127);
-	my $next_dir = shift(@PRUNE_QUEUE);
-	prep_alternate_start($next_dir, $run_prune) if defined($next_dir);
-	my $fmt;
-	if (!$sig && $status == 1) { # unset, default is '' (SHA-1)
-		$fmt = 'sha1';
-	} elsif (!$sig && $status == 0) {
-		chomp($fmt = ${$opt->{1}} || 'sha1');
-	}
-	$fmt // return warn("git config \$?=$? for objdir=$objdir");
+sub prep_alternate_end ($$) {
+	my ($objdir, $fmt) = @_;
 	my $hexlen = $OFMT2HEXLEN{$fmt} // return warn <<EOM;
 E: ignoring objdir=$objdir, unknown extensions.objectFormat=$fmt
 EOM
@@ -860,17 +872,55 @@ EOM
 	say { $ALT_FH{$hexlen} } $objdir;
 }
 
+sub store_objfmt { # via wq_do - make early cidx users happy
+	my ($self, $docid, $git_dir, $fmt) = @_;
+	$self->begin_txn_lazy;
+	my $doc = $self->get_doc($docid) // return
+		warn "BUG? #$docid for $git_dir missing";
+	my @p = xap_terms('P', $doc) or return
+		warn "BUG? #$docid for $git_dir has no P(ath)";
+	@p == 1 or return warn "BUG? #$docid $git_dir multi: @p";
+	$p[0] eq $git_dir or return warn "BUG? #$docid $git_dir != @p";
+	$doc->add_boolean_term('H'.$fmt);
+	$self->{xdb}->replace_document($docid, $doc);
+	# wait for prune_commit to commit...
+}
+
+# TODO: remove prep_alternate_read and store_objfmt 1-2 years after 2.0 is out
+# they are for compatibility with pre-release indices
+sub prep_alternate_read { # run_git cb for config extensions.objectFormat
+	my ($opt, $self, $git, $objdir, $docid, $shard_n, $run_prune) = @_;
+	return if $DO_QUIT;
+	my $chld_err = $?;
+	prep_alternate_start($self, shift(@PRUNEQ), $run_prune) if @PRUNEQ;
+	my $fmt = check_objfmt_status $git, $chld_err, ${$opt->{1}};
+	$IDX_SHARDS[$shard_n]->wq_do('store_objfmt', # async
+					$docid, $git->{git_dir}, $fmt);
+	prep_alternate_end $objdir, $fmt;
+}
+
 sub prep_alternate_start {
-	my ($git_dir, $run_prune) = @_;
-	my $o = $git_dir.'/objects';
+	my ($self, $git, $run_prune) = @_;
+	my $o = $git->git_path('objects');
 	while (!-d $o) {
-		$git_dir = shift(@PRUNE_QUEUE) // return;
-		$o = $git_dir.'/objects';
+		$git = shift(@PRUNEQ) // return;
+		$o = $git->git_path('objects');
+	}
+	my $n = git_dir_hash($git->{git_dir}) % scalar(@RDONLY_XDB);
+	local $self->{xdb} = $RDONLY_XDB[$n] // croak("BUG: no shard[$n]");
+	my @ids = $self->docids_by_postlist('P'.$git->{git_dir});
+	my @fmt = @ids ? xap_terms('H', $self->{xdb}, $ids[0]) : ();
+	@fmt > 1 and warn "BUG? multi `H' for shard[$n] #$ids[0]: @fmt";
+
+	if (@fmt) { # cache hit
+		@PRUNEQ and
+			prep_alternate_start($self, shift(@PRUNEQ), $run_prune);
+		prep_alternate_end $o, $fmt[0];
+	} else { # compatibility w/ early cidx format
+		run_git([qw(config extensions.objectFormat)], { quiet => 1 },
+			\&prep_alternate_read, $self, $git, $o, $ids[0], $n,
+			$run_prune);
 	}
-	my $cmd = [ 'git', "--git-dir=$git_dir",
-			qw(config extensions.objectFormat) ];
-	my $opt = { quiet => 1 };
-	run_await($cmd, undef, $opt, \&prep_alternate_end, $o, $run_prune);
 }
 
 sub cmd_done { # run_await cb for sort, xapian-delve, sed failures
@@ -1059,21 +1109,22 @@ sub init_prune ($) {
 	run_await([@SORT, '-u'], $CMD_ENV, $sort_opt, \&cmd_done, $run_prune);
 	run_await(\@sed, $CMD_ENV, $sed_opt, \&cmd_done, $run_prune);
 	run_await(\@delve, undef, $delve_opt, \&cmd_done, $run_prune);
-	@PRUNE_QUEUE = @{$self->{git_dirs}};
+	@PRUNEQ = @$SCANQ;
 	for (1..$LIVE_JOBS) {
-		prep_alternate_start(shift(@PRUNE_QUEUE) // last, $run_prune);
+		prep_alternate_start($self, shift(@PRUNEQ) // last, $run_prune);
 	}
 }
 
 sub dump_git_commits { # run_await cb
-	my ($pid, undef, undef, $batch_opt) = @_;
-	(defined($pid) && $?) and die "E: @PRUNE_BATCH: \$?=$?";
+	my ($pid, $cmd, undef, $batch_opt, $self) = @_;
+	(defined($pid) && $?) and die "E: @$cmd \$?=$?";
 	return if $DO_QUIT;
-	my ($hexlen) = keys(%ALT_FH) or return; # done
+	my ($hexlen) = keys(%ALT_FH) or return; # done, DESTROY batch_opt->{1}
 	close(delete $ALT_FH{$hexlen}); # flushes `say' buffer
-
-	$PRUNE_BATCH[1] = "--git-dir=$TMPDIR/hexlen$hexlen.git";
-	run_await(\@PRUNE_BATCH, undef, $batch_opt, \&dump_git_commits);
+	progress($self, "preparing $hexlen-byte hex OID commits for prune...");
+	my $g = PublicInbox::Git->new("$TMPDIR/hexlen$hexlen.git");
+	run_await($g->cmd(@PRUNE_BATCH), undef, $batch_opt,
+			\&dump_git_commits, $self);
 }
 
 sub run_prune { # OnDestroy when `git config extensions.objectFormat' are done
@@ -1105,12 +1156,13 @@ sub run_prune { # OnDestroy when `git config extensions.objectFormat' are done
 	warn(sprintf(<<EOM, $git_ver)) if $git_ver lt v2.19;
 W: git v2.19+ recommended for high-latency storage (have git v%vd)
 EOM
-	dump_git_commits(undef, undef, undef, $batch_opt);
+	dump_git_commits(undef, undef, undef, $batch_opt, $self);
 }
 
 sub cidx_read_comm { # via PublicInbox::CidxComm::event_step
 	my ($self, $comm_rd, $drs) = @_;
 	return if $DO_QUIT;
+	progress($self, 'starting prune...');
 	$_->wq_do('prune_init') for @IDX_SHARDS;
 	while (defined(my $cmt = <$comm_rd>)) {
 		chop($cmt) eq "\n" or die "BUG: no LF in comm output ($cmt)";
@@ -1121,6 +1173,7 @@ sub cidx_read_comm { # via PublicInbox::CidxComm::event_step
 	for my $git_dir (@GIT_DIR_GONE) {
 		my $n = git_dir_hash($git_dir) % scalar(@IDX_SHARDS);
 		$IDX_SHARDS[$n]->wq_do('prune_one', 'P'.$git_dir);
+		last if $DO_QUIT;
 	}
 	my ($c, $p) = PublicInbox::PktOp->pair;
 	$c->{ops}->{prune_done} = [ $self, $drs ];
@@ -1201,9 +1254,11 @@ sub show_json { # for diagnostics (unstable output)
 
 sub do_inits { # called via PublicInbox::DS::add_timer
 	my ($self) = @_;
-	init_join_postfork($self);
-	init_prune($self);
-	scan_git_dirs($self) if $self->{-opt}->{scan} // 1;
+	grep !!$_, @{$self->{-opt}}{qw(scan prune)} and
+		@$SCANQ = map PublicInbox::Git->new($_), @{$self->{git_dirs}};
+	init_join_postfork $self;
+	init_prune $self;
+	scan_git_dirs $self;
 	my $max = $TODO{do_join} ? max($LIVE_JOBS, $NPROC) : $LIVE_JOBS;
 	index_next($self) for (1..$max);
 }
@@ -1216,9 +1271,9 @@ sub cidx_run { # main entry point
 	my $restore = PublicInbox::OnDestroy->new($$,
 		\&PublicInbox::DS::sig_setmask, $SIGSET);
 	local $PRUNE_DONE = [];
-	local $IDX_TODO = [];
-	local $GIT_TODO = [];
-	local ($DO_QUIT, $REINDEX, $TXN_BYTES, @GIT_DIR_GONE, @PRUNE_QUEUE,
+	local $IDXQ = [];
+	local $SCANQ = [];
+	local ($DO_QUIT, $REINDEX, $TXN_BYTES, @GIT_DIR_GONE, @PRUNEQ,
 		$REPO_CTX, %ALT_FH, $TMPDIR, @AWK, @COMM, $CMD_ENV,
 		%TODO, @IBXQ, @IBX, @JOIN, %JOIN, @JOIN_PFX,
 		@JOIN_DT, $DUMP_IBX_WPIPE, @OFF2ROOT, $XHC, @SORT, $GITS_NR);

[PATCH 07/15] git: share unlinked pack checking code with gcf2

[Eric Wong]

It saves some code in case we keep libgit2 around.
---
 lib/PublicInbox/Gcf2.pm | 16 ++++------------
 lib/PublicInbox/Git.pm  | 27 ++++++++++++++-------------
 2 files changed, 18 insertions(+), 25 deletions(-)

diff --git a/lib/PublicInbox/Gcf2.pm b/lib/PublicInbox/Gcf2.pm
index dcbb201d..78392990 100644
--- a/lib/PublicInbox/Gcf2.pm
+++ b/lib/PublicInbox/Gcf2.pm
@@ -9,7 +9,7 @@ use PublicInbox::Spawn qw(which run_qx); # may set PERL_INLINE_DIRECTORY
 use Fcntl qw(SEEK_SET);
 use Time::HiRes qw(clock_gettime CLOCK_MONOTONIC);
 use IO::Handle; # autoflush
-use PublicInbox::Git;
+use PublicInbox::Git qw($ck_unlinked_packs);
 use PublicInbox::Lock;
 use autodie qw(close open seek truncate);
 
@@ -86,16 +86,6 @@ sub add_alt ($$) {
 	1;
 }
 
-sub have_unlinked_files () {
-	# FIXME: port gcf2-like over to git.git so we won't need to
-	# deal with libgit2
-	return 1 if $^O ne 'linux';
-	if (my $s = PublicInbox::IO::try_cat("/proc/$$/maps")) {
-		return 1 if /\.(?:idx|pack) \(deleted\)/s;
-	}
-	undef;
-}
-
 # Usage: $^X -MPublicInbox::Gcf2 -e PublicInbox::Gcf2::loop [EXPIRE-TIMEOUT]
 # (see lib/PublicInbox/Gcf2Client.pm)
 sub loop (;$) {
@@ -104,6 +94,7 @@ sub loop (;$) {
 	my (%seen, $check_at);
 	STDERR->autoflush(1);
 	STDOUT->autoflush(1);
+	my $pid = $$;
 
 	while (<STDIN>) {
 		chomp;
@@ -130,7 +121,8 @@ sub loop (;$) {
 			$check_at //= $now + $exp;
 			if ($now > $check_at) {
 				undef $check_at;
-				if (have_unlinked_files()) {
+				if (!$ck_unlinked_packs ||
+						$ck_unlinked_packs->($pid)) {
 					$gcf2 = new();
 					%seen = ();
 				}
diff --git a/lib/PublicInbox/Git.pm b/lib/PublicInbox/Git.pm
index 235a35cd..9c4d938e 100644
--- a/lib/PublicInbox/Git.pm
+++ b/lib/PublicInbox/Git.pm
@@ -24,7 +24,8 @@ use Carp qw(croak carp);
 use PublicInbox::SHA qw(sha_all);
 our %HEXLEN2SHA = (40 => 1, 64 => 256);
 our %OFMT2HEXLEN = (sha1 => 40, sha256 => 64);
-our @EXPORT_OK = qw(git_unquote git_quote %HEXLEN2SHA %OFMT2HEXLEN);
+our @EXPORT_OK = qw(git_unquote git_quote %HEXLEN2SHA %OFMT2HEXLEN
+			$ck_unlinked_packs);
 our $in_cleanup;
 our $async_warn; # true in read-only daemons
 
@@ -597,27 +598,27 @@ sub manifest_entry {
 	$ent;
 }
 
+our $ck_unlinked_packs = $^O eq 'linux' ? sub {
+	# FIXME: port gcf2-like over to git.git so we won't need to
+	# deal with libgit2
+	my $s = try_cat "/proc/$_[0]/maps";
+	$s =~ /\.(?:idx|pack) \(deleted\)/s ? 1 : undef;
+} : undef;
+
 # returns true if there are pending cat-file processes
 sub cleanup_if_unlinked {
 	my ($self) = @_;
-	return cleanup($self, 1) if $^O ne 'linux';
+	$ck_unlinked_packs or return cleanup($self, 1);
 	# Linux-specific /proc/$PID/maps access
 	# TODO: support this inside git.git
-	my $ret = 0;
+	my $nr_live = 0;
 	for my $obj ($self, ($self->{ck} // ())) {
 		my $sock = $obj->{sock} // next;
 		my $pid = $sock->attached_pid // next;
-		open my $fh, '<', "/proc/$pid/maps" or return cleanup($self, 1);
-		while (<$fh>) {
-			# n.b. we do not restart for unlinked multi-pack-index
-			# since it's not too huge, and the startup cost may
-			# be higher.
-			/\.(?:idx|pack) \(deleted\)$/ and
-				return cleanup($self, 1);
-		}
-		++$ret;
+		$ck_unlinked_packs->($pid) and return cleanup($self, 1);
+		++$nr_live;
 	}
-	$ret;
+	$nr_live;
 }
 
 sub event_step {

[PATCH 08/15] cindex: skip getpid guard for most OnDestroy use

[Eric Wong]

We no longer fork after cidx_init, so there's no need to spend
CPU cycles on the getpid() syscall, especially since it's no
longer cached on glibc while syscalls are also more expensive
these days due to CPU vulnerability mitigations.
---
 lib/PublicInbox/CodeSearchIdx.pm | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/lib/PublicInbox/CodeSearchIdx.pm b/lib/PublicInbox/CodeSearchIdx.pm
index 7580a49a..555a1efe 100644
--- a/lib/PublicInbox/CodeSearchIdx.pm
+++ b/lib/PublicInbox/CodeSearchIdx.pm
@@ -365,7 +365,7 @@ sub repo_stored {
 	$did > 0 or die "BUG: $repo_ctx->{repo}->{git_dir}: docid=$did";
 	my ($c, $p) = PublicInbox::PktOp->pair;
 	$c->{ops}->{shard_done} = [ $self, $repo_ctx,
-		PublicInbox::OnDestroy->new($$, \&next_repos, $repo_ctx, $drs)];
+		PublicInbox::OnDestroy->new(\&next_repos, $repo_ctx, $drs)];
 	# shard_done fires when all shards are committed
 	my @active = keys %{$repo_ctx->{active}};
 	$IDX_SHARDS[$_]->wq_io_do('shard_commit', [ $p->{op_p} ]) for @active;
@@ -607,8 +607,8 @@ sub index_next ($) {
 		index_repo(undef, $self, shift @$IDXQ);
 	} elsif ($SCANQ && @$SCANQ) {
 		my $git = shift @$SCANQ;
-		my $prep_repo = PublicInbox::OnDestroy->new($$, \&prep_repo,
-							$self, $git);
+		my $prep_repo = PublicInbox::OnDestroy->new(\&prep_repo,
+								$self, $git);
 		fp_start($self, $git, $prep_repo);
 		ct_start($self, $git, $prep_repo);
 	} elsif ($TMPDIR) {
@@ -669,7 +669,7 @@ sub index_repo { # run_git cb
 	my $repo_ctx = $REPO_CTX = { self => $self, repo => $repo };
 	delete $git->{-cidx_gits_fini}; # may fire gits_fini
 	my $drs = delete $git->{-cidx_dump_roots_start};
-	my $index_done = PublicInbox::OnDestroy->new($$, \&index_done,
+	my $index_done = PublicInbox::OnDestroy->new(\&index_done,
 							$repo_ctx, $drs);
 	my ($c, $p) = PublicInbox::PktOp->pair;
 	$c->{ops}->{shard_done} = [ $self, $repo_ctx, $index_done ];
@@ -779,7 +779,7 @@ sub scan_git_dirs ($) {
 	my ($self) = @_;
 	@$SCANQ = () unless $self->{-opt}->{scan};
 	$GITS_NR = @$SCANQ or return;
-	my $gits_fini = PublicInbox::OnDestroy->new($$, \&gits_fini);
+	my $gits_fini = PublicInbox::OnDestroy->new(\&gits_fini);
 	$_->{-cidx_gits_fini} = $gits_fini for @$SCANQ;
 	if (my $drs = $TODO{dump_roots_start}) {
 		$_->{-cidx_dump_roots_start} = $drs for @$SCANQ;
@@ -851,7 +851,7 @@ sub prep_umask ($) {
 		umask == $um or progress($self, 'using umask from ',
 						$self->{cidx_dir}, ': ',
 						sprintf('0%03o', $um));
-		PublicInbox::OnDestroy->new($$, \&CORE::umask, umask($um));
+		PublicInbox::OnDestroy->new(\&CORE::umask, umask($um));
 	} else {
 		$self->{umask} = umask; # for SearchIdx->with_umask
 		undef;
@@ -1073,11 +1073,11 @@ EOM
 	($JOIN_DT[1]) = ($QRY_STR =~ /\.\.([0-9]{14})\z/); # YYYYmmddHHMMSS
 	($JOIN_DT[0]) = ($QRY_STR =~ /\Adt:([0-9]{14})/); # YYYYmmddHHMMSS
 	$JOIN_DT[0] //= '19700101'.'000000'; # git uses unsigned times
-	$TODO{do_join} = PublicInbox::OnDestroy->new($$, \&do_join, $self);
+	$TODO{do_join} = PublicInbox::OnDestroy->new(\&do_join, $self);
 	$TODO{joining} = 1; # keep shards_active() happy
-	$TODO{dump_ibx_start} = PublicInbox::OnDestroy->new($$,
-				\&dump_ibx_start, $self, $TODO{do_join});
-	$TODO{dump_roots_start} = PublicInbox::OnDestroy->new($$,
+	$TODO{dump_ibx_start} = PublicInbox::OnDestroy->new(\&dump_ibx_start,
+							$self, $TODO{do_join});
+	$TODO{dump_roots_start} = PublicInbox::OnDestroy->new(
 				\&dump_roots_start, $self, $TODO{do_join});
 	progress($self, "will join in $QRY_STR date range...");
 	my $id = -1;
@@ -1100,7 +1100,7 @@ sub init_prune ($) {
 	require_progs('prune', 'xapian-delve' => \@delve, sed => \@sed,
 			comm => \@COMM, awk => \@AWK);
 	for (0..$#IDX_SHARDS) { push @delve, "$self->{xpfx}/$_" }
-	my $run_prune = PublicInbox::OnDestroy->new($$, \&run_prune, $self,
+	my $run_prune = PublicInbox::OnDestroy->new(\&run_prune, $self,
 						$TODO{dump_roots_start});
 	my ($sort_opt, $sed_opt, $delve_opt);
 	pipe(local $sed_opt->{0}, local $delve_opt->{1});

[PATCH 09/15] spawn: drop IO layer support from redirects

[Eric Wong]

When setting up stdin for commands, the write_file API is
convenient enough nowadays to not be worth having special
support with process spawning.

When reading stdout of commands, we should probably be using
utf8_maybe everywhere since there'll always be legacy encodings
in git repos.

Reading regular files with :utf8 also results in worse memory
management since the file size cannot be used as a hint.
---
 lib/PublicInbox/MailDiff.pm  |  3 ++-
 lib/PublicInbox/SearchIdx.pm |  5 ++++-
 lib/PublicInbox/Spawn.pm     | 32 +++++++++++---------------------
 3 files changed, 17 insertions(+), 23 deletions(-)

diff --git a/lib/PublicInbox/MailDiff.pm b/lib/PublicInbox/MailDiff.pm
index e4e262ef..125360fe 100644
--- a/lib/PublicInbox/MailDiff.pm
+++ b/lib/PublicInbox/MailDiff.pm
@@ -65,6 +65,7 @@ sub next_smsg ($) {
 sub emit_msg_diff {
 	my ($bref, $self) = @_; # bref is `git diff' output
 	require PublicInbox::Hval;
+	PublicInbox::Hval::utf8_maybe($$bref);
 
 	# will be escaped to `•' in HTML
 	$self->{ctx}->{ibx}->{obfuscate} and
@@ -81,7 +82,7 @@ sub do_diff {
 	my $dir = "$self->{tmp}/$n";
 	$self->dump_eml($dir, $eml);
 	my $cmd = [ qw(git diff --no-index --no-color -- a), $n ];
-	my $opt = { -C => "$self->{tmp}", quiet => 1, 1 => [':utf8', \my $o] };
+	my $opt = { -C => "$self->{tmp}", quiet => 1 };
 	my $qsp = PublicInbox::Qspawn->new($cmd, undef, $opt);
 	$qsp->psgi_qx($self->{ctx}->{env}, undef, \&emit_msg_diff, $self);
 }
diff --git a/lib/PublicInbox/SearchIdx.pm b/lib/PublicInbox/SearchIdx.pm
index 17538027..86c435fd 100644
--- a/lib/PublicInbox/SearchIdx.pm
+++ b/lib/PublicInbox/SearchIdx.pm
@@ -355,8 +355,11 @@ sub index_body_text {
 	my $rd;
 	if ($$sref =~ /^(?:diff|---|\+\+\+) /ms) { # start patch-id in parallel
 		my $git = ($self->{ibx} // $self->{eidx} // $self)->git;
+		my $fh = PublicInbox::IO::write_file '+>:utf8', undef, $$sref;
+		$fh->flush or die "flush: $!";
+		sysseek($fh, 0, SEEK_SET);
 		$rd = popen_rd($git->cmd(qw(patch-id --stable)), undef,
-				{ 0 => [ ':utf8', $sref ] });
+				{ 0 => $fh });
 	}
 
 	# split off quoted and unquoted blocks:
diff --git a/lib/PublicInbox/Spawn.pm b/lib/PublicInbox/Spawn.pm
index 9c680690..e6b12994 100644
--- a/lib/PublicInbox/Spawn.pm
+++ b/lib/PublicInbox/Spawn.pm
@@ -332,18 +332,6 @@ sub which ($) {
 	undef;
 }
 
-sub scalar_redirect {
-	my ($layer, $opt, $child_fd, $bref) = @_;
-	open my $fh, '+>'.$layer, undef;
-	$opt->{"fh.$child_fd"} = $fh;
-	if ($child_fd == 0) {
-		print $fh $$bref;
-		$fh->flush or die "flush: $!";
-		sysseek($fh, 0, SEEK_SET);
-	}
-	fileno($fh);
-}
-
 sub spawn ($;$$) {
 	my ($cmd, $env, $opt) = @_;
 	my $f = which($cmd->[0]) // die "$cmd->[0]: command not found\n";
@@ -354,14 +342,18 @@ sub spawn ($;$$) {
 	}
 	for my $child_fd (0..2) {
 		my $pfd = $opt->{$child_fd};
-		if ('ARRAY' eq ref($pfd)) {
-			my ($layer, $bref) = @$pfd;
-			$pfd = scalar_redirect($layer, $opt, $child_fd, $bref)
-		} elsif ('SCALAR' eq ref($pfd)) {
-			$pfd = scalar_redirect('', $opt, $child_fd, $pfd);
+		if ('SCALAR' eq ref($pfd)) {
+			open my $fh, '+>', undef;
+			$opt->{"fh.$child_fd"} = $fh; # for read_out_err
+			if ($child_fd == 0) {
+				print $fh $$pfd;
+				$fh->flush or die "flush: $!";
+				sysseek($fh, 0, SEEK_SET);
+			}
+			$pfd = fileno($fh);
 		} elsif (defined($pfd) && $pfd !~ /\A[0-9]+\z/) {
 			my $fd = fileno($pfd) //
-					die "$pfd not an IO GLOB? $!";
+					croak "BUG: $pfd not an IO GLOB? $!";
 			$pfd = $fd;
 		}
 		$rdr[$child_fd] = $pfd // $child_fd;
@@ -399,9 +391,7 @@ sub read_out_err ($) {
 	for my $fd (1, 2) { # read stdout/stderr
 		my $fh = delete($opt->{"fh.$fd"}) // next;
 		seek($fh, 0, SEEK_SET);
-		my $dst = $opt->{$fd};
-		$dst = $opt->{$fd} = $dst->[1] if ref($dst) eq 'ARRAY';
-		PublicInbox::IO::read_all $fh, 0, $dst
+		PublicInbox::IO::read_all $fh, undef, $opt->{$fd};
 	}
 }
 

[PATCH 10/15] cindex: speed up initial scan setup phase

[Eric Wong]

This brings a no-op -cindex scan of a git.kernel.org mirror
down from 70s to 10s with a hot cache on a busy machine.

CPU-intensive SHA-256 fingerprinting of the `git show-ref'
result can be parallelized on shard workers.  Future changes can
move more of the initial scan setup phase into shard workers for
more parallelism.

But most of the performance for skipping unchanged repos is
gained from delaying the commit time reading until we've seen
the fingerprint is out-of-date, since reading commit times
requires a large amount of I/O compared to only reading refs
for fingerprints.
---
 lib/PublicInbox/CodeSearchIdx.pm | 99 +++++++++++++++++---------------
 1 file changed, 53 insertions(+), 46 deletions(-)

diff --git a/lib/PublicInbox/CodeSearchIdx.pm b/lib/PublicInbox/CodeSearchIdx.pm
index 555a1efe..ec0fc6e3 100644
--- a/lib/PublicInbox/CodeSearchIdx.pm
+++ b/lib/PublicInbox/CodeSearchIdx.pm
@@ -105,6 +105,7 @@ our (
 	@JOIN_DT, # YYYYmmddHHMMSS for dt:
 	$QRY_STR, # common query string for both code and inbox associations
 	$DUMP_IBX_WPIPE, # goes to sort(1)
+	$ANY_SHARD, # shard round-robin for scan fingerprinting
 	@OFF2ROOT,
 );
 
@@ -416,51 +417,42 @@ sub run_git {
 
 # this is different from the grokmirror-compatible fingerprint since we
 # only care about --heads (branches) and --tags, and not even their names
-sub fp_start ($$$) {
-	my ($self, $git, $prep_repo) = @_;
+sub fp_start ($$) {
+	my ($self, $git) = @_;
 	return if $DO_QUIT;
 	open my $refs, '+>', undef;
 	$git->{-repo}->{refs} = $refs;
-	run_git([qw(show-ref --heads --tags --hash)], { 1 => $refs },
-		\&fp_fini, $self, $git, $prep_repo);
-}
-
-sub fp_fini { # run_git cb
-	my (undef, $self, $git, $prep_repo) = @_;
-	my $refs = $git->{-repo}->{refs} // die 'BUG: no {-repo}->{refs}';
-	sysseek($refs, 0, SEEK_SET);
-	$git->{-repo}->{fp} = sha_all(256, $refs)->hexdigest;
+	my ($c, $p) = PublicInbox::PktOp->pair;
+	my $next_on_err = PublicInbox::OnDestroy->new(\&index_next, $self);
+	$c->{ops}->{fp_done} = [ $self, $git, $next_on_err ];
+	$IDX_SHARDS[++$ANY_SHARD % scalar(@IDX_SHARDS)]->wq_io_do('fp_async',
+					[ $p->{op_p}, $refs ], $git->{git_dir})
 }
 
-sub ct_start ($$$) {
-	my ($self, $git, $prep_repo) = @_;
-	return if $DO_QUIT;
-	run_git([ qw[for-each-ref --sort=-committerdate
-		--format=%(committerdate:raw) --count=1
-		refs/heads/ refs/tags/] ], undef, # capture like qx
-		\&ct_fini, $self, $git, $prep_repo);
+sub fp_async { # via wq_io_do in worker
+	my ($self, $git_dir) = @_;
+	my $op_p = delete $self->{0} // die 'BUG: no {0} op_p';
+	my $refs = delete $self->{1} // die 'BUG: no {1} refs';
+	my $git = PublicInbox::Git->new($git_dir);
+	run_git([qw(show-ref --heads --tags --hash)], { 1 => $refs },
+		\&fp_async_done, $self, $git, $op_p);
 }
 
-sub ct_fini { # run_git cb
-	my ($opt, $self, $git, $prep_repo) = @_;
-	my ($ct) = split(/\s+/, ${$opt->{1}}); # drop TZ + LF
-	$git->{-repo}->{ct} = $ct + 0;
+sub fp_async_done { # run_git cb from worker
+	my ($opt, $self, $git, $op_p) = @_;
+	my $refs = delete $opt->{1} // 'BUG: no {-repo}->{refs}';
+	sysseek($refs, 0, SEEK_SET);
+	send($op_p, 'fp_done '.sha_all(256, $refs)->hexdigest, 0);
 }
 
-# TODO: also index gitweb.owner and the full fingerprint for grokmirror?
-sub prep_repo ($$) {
-	my ($self, $git) = @_;
+sub fp_done { # called parent via PktOp by fp_async_done
+	my ($self, $git, $next_on_err, $hex) = @_;
+	$next_on_err->cancel;
 	return if $DO_QUIT;
-	return index_next($self) if $git->{-cidx_err};
-	my $repo = $git->{-repo} // die 'BUG: no {-repo}';
-	if (!defined($repo->{ct})) {
-		warn "W: $git->{git_dir} has no commits, skipping\n";
-		delete $git->{-repo};
-		return index_next($self);
-	}
+	$git->{-repo}->{fp} = $hex;
 	my $n = git_dir_hash($git->{git_dir}) % scalar(@RDONLY_XDB);
 	my $shard = bless { %$self, shard => $n }, ref($self);
-	$repo->{shard_n} = $n;
+	$git->{-repo}->{shard_n} = $n;
 	delete @$shard{qw(lockfh lock_path)};
 	local $shard->{xdb} = $RDONLY_XDB[$n] // die "BUG: shard[$n] undef";
 	$shard->retry_reopen(\&check_existing, $self, $git);
@@ -469,7 +461,7 @@ sub prep_repo ($$) {
 sub check_existing { # retry_reopen callback
 	my ($shard, $self, $git) = @_;
 	my @docids = $shard->docids_of_git_dir($git->{git_dir});
-	my $docid = shift(@docids) // return get_roots($self, $git);
+	my $docid = shift(@docids) // return prep_repo($self, $git); # new repo
 	my $doc = $shard->get_doc($docid) //
 			die "BUG: no #$docid ($git->{git_dir})";
 	my $old_fp = $REINDEX ? "\0invalid" : $doc->get_data;
@@ -482,7 +474,7 @@ sub check_existing { # retry_reopen callback
 		warn "BUG: $git->{git_dir} indexed multiple times, culling\n";
 		$git->{-repo}->{to_delete} = \@docids; # XXX needed?
 	}
-	get_roots($self, $git);
+	prep_repo($self, $git);
 }
 
 sub partition_refs ($$$) {
@@ -604,13 +596,9 @@ sub index_next ($) {
 	my ($self) = @_;
 	return if $DO_QUIT;
 	if ($IDXQ && @$IDXQ) {
-		index_repo(undef, $self, shift @$IDXQ);
+		index_repo($self, shift @$IDXQ);
 	} elsif ($SCANQ && @$SCANQ) {
-		my $git = shift @$SCANQ;
-		my $prep_repo = PublicInbox::OnDestroy->new(\&prep_repo,
-								$self, $git);
-		fp_start($self, $git, $prep_repo);
-		ct_start($self, $git, $prep_repo);
+		fp_start $self, shift @$SCANQ;
 	} elsif ($TMPDIR) {
 		delete $TODO{dump_roots_start};
 		delete $TODO{dump_ibx_start}; # runs OnDestroy once
@@ -649,12 +637,17 @@ sub index_done { # OnDestroy cb called when done indexing each code repo
 	# repo_stored will fire once store_repo is done
 }
 
-sub index_repo { # run_git cb
-	my (undef, $self, $git) = @_;
+sub index_repo {
+	my ($self, $git) = @_;
 	return if $DO_QUIT;
+	my $repo = $git->{-repo} // die 'BUG: no {-repo}';
 	return index_next($self) if $git->{-cidx_err};
+	if (!defined($repo->{ct})) {
+		warn "W: $git->{git_dir} has no commits, skipping\n";
+		return index_next($self);
+	}
 	return push(@$IDXQ, $git) if $REPO_CTX; # busy
-	my $repo = delete $git->{-repo} or return index_next($self);
+	delete $git->{-repo};
 	my $roots_fh = delete $repo->{roots_fh} // die 'BUG: no {roots_fh}';
 	seek($roots_fh, 0, SEEK_SET);
 	chomp(my @roots = PublicInbox::IO::read_all $roots_fh);
@@ -685,15 +678,28 @@ sub index_repo { # run_git cb
 	# shard_done fires when shard_index is done
 }
 
-sub get_roots ($$) {
+sub ct_fini { # run_git cb
+	my ($opt, $self, $git, $index_repo) = @_;
+	my ($ct) = split(/\s+/, ${$opt->{1}}); # drop TZ + LF
+	$git->{-repo}->{ct} = $ct + 0;
+}
+
+# TODO: also index gitweb.owner and the full fingerprint for grokmirror?
+sub prep_repo ($$) {
 	my ($self, $git) = @_;
 	return if $DO_QUIT;
+	my $index_repo = PublicInbox::OnDestroy->new(\&index_repo, $self, $git);
 	my $refs = $git->{-repo}->{refs} // die 'BUG: no {-repo}->{refs}';
 	sysseek($refs, 0, SEEK_SET);
 	open my $roots_fh, '+>', undef;
 	$git->{-repo}->{roots_fh} = $roots_fh;
 	run_git([ qw(rev-list --stdin --max-parents=0) ],
-		{ 0 => $refs, 1 => $roots_fh }, \&index_repo, $self, $git)
+		{ 0 => $refs, 1 => $roots_fh }, \&PublicInbox::Config::noop,
+		$self, $git, $index_repo);
+	run_git([ qw[for-each-ref --sort=-committerdate
+		--format=%(committerdate:raw) --count=1
+		refs/heads/ refs/tags/] ], undef, # capture like qx
+		\&ct_fini, $self, $git, $index_repo);
 }
 
 # for PublicInbox::SearchIdx `git patch-id' call and with_umask
@@ -1295,6 +1301,7 @@ sub cidx_run { # main entry point
 		init_join_prefork($self)
 	}
 	local @IDX_SHARDS = cidx_init($self); # forks workers
+	local $ANY_SHARD = -1;
 	local $self->{current_info} = '';
 	local $MY_SIG = {
 		CHLD => \&PublicInbox::DS::enqueue_reap,

[PATCH 11/15] inbox: expire resources more aggressively

[Eric Wong]

We no longer trigger git cleanups from the Inbox package since
`git cat-file' users have their own cleanup to support git
coderepos not associated with any inbox.

This change means we unconditionally expire SQLite and Xapian
FDs and some internal caches regardless of git activity.  The
old logic was irrelevant to Gcf2 (libgit2) users anyways since
we couldn't determine whether or not an inbox was active based
on {inflight} git requests, and upcoming changes will make it
inaccurate for all extindex/cindex users as well.

Opening SQLite and Xapian DBs is fairly cheap; so it's a small
price to pay to reduce memory use and fragmentation.
---
 lib/PublicInbox/Inbox.pm | 24 ++++++++----------------
 1 file changed, 8 insertions(+), 16 deletions(-)

diff --git a/lib/PublicInbox/Inbox.pm b/lib/PublicInbox/Inbox.pm
index e71ef6d2..7af0ad90 100644
--- a/lib/PublicInbox/Inbox.pm
+++ b/lib/PublicInbox/Inbox.pm
@@ -12,28 +12,20 @@ use List::Util qw(max);
 use Carp qw(croak);
 use PublicInbox::Compat qw(uniqstr);
 
-# returns true if further checking is required
+# in case DBs get replaced (Xapcmd does it for v1)
 sub check_inodes ($) {
 	for (qw(over mm)) { $_[0]->{$_}->check_inodes if $_[0]->{$_} }
 }
 
+# search/over/mm hold onto FDs and description+cloneurl may get updated.
+# creating long-lived allocations in the same phase as short-lived
+# allocations also leads to fragmentation, so we don't want some stuff
+# living too long.
 sub do_cleanup {
 	my ($ibx) = @_;
-	my $live;
-	if (defined $ibx->{git}) {
-		$live = $ibx->isa(__PACKAGE__) ? $ibx->{git}->cleanup(1)
-					: $ibx->{git}->cleanup_if_unlinked;
-		delete($ibx->{git}) unless $live;
-	}
-	if ($live) {
-		check_inodes($ibx);
-	} else {
-		delete(@$ibx{qw(over mm description cloneurl
-				-imap_url -nntp_url -pop3_url)});
-	}
-	my $srch = $ibx->{search} // $ibx;
+	my ($srch) = delete @$ibx{qw(search over mm description cloneurl)};
+	$srch //= $ibx; # extsearch
 	delete @$srch{qw(xdb qp)};
-	PublicInbox::DS::add_uniq_timer($ibx+0, 5, \&do_cleanup, $ibx) if $live;
 }
 
 sub _cleanup_later ($) {
@@ -370,7 +362,7 @@ sub unsubscribe_unlock {
 # called by inotify
 sub on_unlock {
 	my ($self) = @_;
-	check_inodes($self);
+	check_inodes($self); # DB files may be replaced while holding lock
 	my $subs = $self->{unlock_subs} or return;
 	for my $obj (values %$subs) {
 		eval { $obj->on_inbox_unlock($self) };

[PATCH 12/15] git_async_cat: use git from "all" extindex if possible

[Eric Wong]

For inboxes associated with an extindex (currently only the
special "all") one, we can share the git process across
all those inboxes unambiguously when retrieving full SHA-1
blobs.

The comment for my proposed patch is also out-of-date as that
git speedup has been a part of git since 2.33.
---
 lib/PublicInbox/GitAsyncCat.pm | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/lib/PublicInbox/GitAsyncCat.pm b/lib/PublicInbox/GitAsyncCat.pm
index 09744b34..f57e0336 100644
--- a/lib/PublicInbox/GitAsyncCat.pm
+++ b/lib/PublicInbox/GitAsyncCat.pm
@@ -9,11 +9,11 @@ our $GCF2C; # singleton PublicInbox::Gcf2Client
 
 sub ibx_async_cat ($$$$) {
 	my ($ibx, $oid, $cb, $arg) = @_;
-	my $git = $ibx->{git} // $ibx->git;
+	my $isrch = $ibx->{isrch};
+	my $git = $isrch ? $isrch->{es}->git : ($ibx->{git} // $ibx->git);
 	# {topdir} means ExtSearch (likely [extindex "all"]) with potentially
-	# 100K alternates.  git(1) has a proposed patch for 100K alternates:
-	# <https://lore.kernel.org/git/20210624005806.12079-1-e@80x24.org/>
-	if (!defined($ibx->{topdir}) && !defined($git->{-tmp}) &&
+	# 100K alternates.  git v2.33+ can handle 100k alternates fairly well.
+	if (!$isrch && !defined($ibx->{topdir}) && !defined($git->{-tmp}) &&
 		($GCF2C //= eval {
 		require PublicInbox::Gcf2Client;
 		PublicInbox::Gcf2Client::new();

[PATCH 13/15] www_listing: support publicInbox.nameIsUrl

[Eric Wong]

This is a convenient (and slightly memory-saving) alternative to
specifying a `publicinbox.*.url' entry for every single inbox
when using publicinbox.wwwListing.
---
 Documentation/public-inbox-config.pod | 19 ++++++++++++++++++-
 lib/PublicInbox/WwwListing.pm         | 21 +++++++++++++--------
 2 files changed, 31 insertions(+), 9 deletions(-)

diff --git a/Documentation/public-inbox-config.pod b/Documentation/public-inbox-config.pod
index d394d31f..d2017704 100644
--- a/Documentation/public-inbox-config.pod
+++ b/Documentation/public-inbox-config.pod
@@ -273,7 +273,9 @@ Default: 25
 
 A comma-delimited list of listings to hide the inbox from.
 
-Valid values are currently C<www> and C<manifest>.
+Valid values are currently C<www> and C<manifest> for non-C<404>
+values of L</publicinbox.wwwListing> and L</publicinbox.grokManifest>,
+respectively
 
 Default: none
 
@@ -379,6 +381,21 @@ TODO support showing cgit listing
 
 Default: C<404>
 
+=item publicinbox.nameIsUrl
+
+Treat the name of the public inbox as it's unqualified URL when
+using C<publicInbox.wwwListing=all>.  This is, every
+C<[publicinbox "foo"]> section implicitly sets C<publicinbox.foo.url=foo>.
+
+This is a convenient alternative to specifying
+C<publicinbox.E<lt>nameE<gt>.url> for every single inbox if
+your inbox URLs are domain-agnostic when using
+C<publicInbox.wwwListing=all>
+
+Default: false
+
+New in public-inbox 2.0.0 (PENDING).
+
 =item publicinbox.grokmanifest
 
 Controls the generation of a grokmirror-compatible gzipped JSON file
diff --git a/lib/PublicInbox/WwwListing.pm b/lib/PublicInbox/WwwListing.pm
index 21e5b8bc..e3d2e84c 100644
--- a/lib/PublicInbox/WwwListing.pm
+++ b/lib/PublicInbox/WwwListing.pm
@@ -41,10 +41,7 @@ sub list_match_i { # ConfigIter callback
 	if (defined($section)) {
 		return if $section !~ m!\Apublicinbox\.([^/]+)\z!;
 		my $ibx = $cfg->lookup_name($1) or return;
-		if (!$ibx->{-hide}->{$ctx->hide_key} &&
-					grep(/$re/, @{$ibx->{url} // []})) {
-			$ctx->ibx_entry($ibx);
-		}
+		$ctx->ibx_entry($ibx) unless $ctx->hide_inbox($ibx, $re);
 	} else { # undef == "EOF"
 		$ctx->{-wcb}->($ctx->psgi_triple);
 	}
@@ -54,13 +51,17 @@ sub url_filter {
 	my ($ctx, $key, $default) = @_;
 	$key //= 'publicInbox.wwwListing';
 	$default //= '404';
-	my $v = $ctx->{www}->{pi_cfg}->{lc $key} // $default;
+	my $cfg = $ctx->{www}->{pi_cfg};
+	my $v = $cfg->{lc $key} // $default;
 again:
 	if ($v eq 'match=domain') {
 		my $h = $ctx->{env}->{HTTP_HOST} // $ctx->{env}->{SERVER_NAME};
 		$h =~ s/:[0-9]+\z//;
 		(qr!\A(?:https?:)?//\Q$h\E(?::[0-9]+)?/!i, "url:$h");
 	} elsif ($v eq 'all') {
+		my $niu = $cfg->{lc 'publicinbox.nameIsUrl'};
+		defined($niu) && $cfg->git_bool($niu) and
+			$ctx->{-name_is_url} = [ '.' ];
 		(qr/./, undef);
 	} elsif ($v eq '404') {
 		(undef, undef);
@@ -76,6 +77,12 @@ EOF
 
 sub hide_key { 'www' }
 
+sub hide_inbox {
+	my ($ctx, $ibx, $re) = @_;
+	$ibx->{-hide}->{$ctx->hide_key} ||
+		!grep(/$re/, @{$ibx->{url} // $ctx->{-name_is_url} // []})
+}
+
 sub add_misc_ibx { # MiscSearch->retry_reopen callback
 	my ($misc, $ctx, $re, $qs) = @_;
 	require PublicInbox::SearchQuery;
@@ -104,15 +111,13 @@ sub add_misc_ibx { # MiscSearch->retry_reopen callback
 		$ctx->ibx_entry($pi_cfg->ALL // die('BUG: ->ALL expected'), {});
 	}
 	my $mset = $misc->mset($qs, $opt); # sorts by $MODIFIED (mtime)
-	my $hide_key = $ctx->hide_key;
 
 	for my $mi ($mset->items) {
 		my $doc = $mi->get_document;
 		my ($eidx_key) = PublicInbox::Search::xap_terms('Q', $doc);
 		$eidx_key // next;
 		my $ibx = $pi_cfg->lookup_eidx_key($eidx_key) // next;
-		next if $ibx->{-hide}->{$hide_key};
-		grep(/$re/, @{$ibx->{url} // []}) or next;
+		next if $ctx->hide_inbox($ibx, $re);
 		$ctx->ibx_entry($ibx, $misc->doc2ibx_cache_ent($doc));
 		if ($r) { # for descriptions in search_nav_bot
 			my $pct = PublicInbox::Search::get_pct($mi);

[PATCH 14/15] inbox: shrink data structures for publicinbox.*.hide

[Eric Wong]

We no longer vivify the intermediate $ibx->{-hide} hashref,
instead we use $ibx->{-hide_$KEY} directly.  This avoids
an intermediate hashref and extra hash table lookups.
---
 lib/PublicInbox/CodeSearch.pm | 2 +-
 lib/PublicInbox/Inbox.pm      | 8 ++------
 lib/PublicInbox/WwwListing.pm | 2 +-
 3 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/lib/PublicInbox/CodeSearch.pm b/lib/PublicInbox/CodeSearch.pm
index 208f7528..f4694686 100644
--- a/lib/PublicInbox/CodeSearch.pm
+++ b/lib/PublicInbox/CodeSearch.pm
@@ -328,7 +328,7 @@ EOM
 				if (my $git = $dir2cr{$_}) {
 					$ibx_p2g{$_} = $git;
 					$ibx2self = 1;
-					$ibx->{-hide}->{www} or
+					$ibx->{-hide_www} or
 						push @{$git->{ibx_score}},
 							[ $nr, $ibx->{name} ];
 					push @$gits, $git;
diff --git a/lib/PublicInbox/Inbox.pm b/lib/PublicInbox/Inbox.pm
index 7af0ad90..dd689221 100644
--- a/lib/PublicInbox/Inbox.pm
+++ b/lib/PublicInbox/Inbox.pm
@@ -70,12 +70,8 @@ sub new {
 		delete $opts->{feedmax};
 	}
 	# allow any combination of multi-line or comma-delimited hide entries
-	my $hide = {};
-	if (defined(my $h = $opts->{hide})) {
-		foreach my $v (@$h) {
-			$hide->{$_} = 1 foreach (split(/\s*,\s*/, $v));
-		}
-		$opts->{-hide} = $hide;
+	for $v (@{delete($opts->{hide}) // []}) {
+		$opts->{-'hide_'.$_} = 1 for split(/\s*,\s*/, $v);
 	}
 	bless $opts, $class;
 }
diff --git a/lib/PublicInbox/WwwListing.pm b/lib/PublicInbox/WwwListing.pm
index e3d2e84c..2d6c74da 100644
--- a/lib/PublicInbox/WwwListing.pm
+++ b/lib/PublicInbox/WwwListing.pm
@@ -79,7 +79,7 @@ sub hide_key { 'www' }
 
 sub hide_inbox {
 	my ($ctx, $ibx, $re) = @_;
-	$ibx->{-hide}->{$ctx->hide_key} ||
+	$ibx->{'-hide_'.$ctx->hide_key} ||
 		!grep(/$re/, @{$ibx->{url} // $ctx->{-name_is_url} // []})
 }
 

[PATCH 15/15] codesearch: use retry_reopen for WWW

[Eric Wong]

As with mail search, a cindex may be updated while WWW is
serving requests.  Thus we must reopen the Xapian DB when
the revision we're using becomes stale.
---
 lib/PublicInbox/CodeSearch.pm | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/lib/PublicInbox/CodeSearch.pm b/lib/PublicInbox/CodeSearch.pm
index f4694686..a2f4bae8 100644
--- a/lib/PublicInbox/CodeSearch.pm
+++ b/lib/PublicInbox/CodeSearch.pm
@@ -256,17 +256,22 @@ sub load_ct { # retry_reopen cb
 	}
 }
 
+sub load_ct { # retry_reopen cb
+	my ($self, $git_dir) = @_;
+	my @ids = docids_of_git_dir $self, $git_dir or return;
+	for (@ids) {
+		my $doc = $self->get_doc($_) // next;
+		return int_val($doc, CT);
+	}
+}
+
 sub load_commit_times { # each_cindex callback
 	my ($self, $todo) = @_; # todo = [ [ time, git ], [ time, git ] ...]
-	my (@pending, $rec, $dir, @ids, $doc);
+	my (@pending, $rec, $ct);
 	while ($rec = shift @$todo) {
-		@ids = docids_of_git_dir $self, $rec->[1]->{git_dir};
-		if (@ids) {
-			for (@ids) {
-				$doc = $self->get_doc($_) // next;
-				$rec->[0] = int_val($doc, CT);
-				last;
-			}
+		$ct = $self->retry_reopen(\&load_ct, $rec->[1]->{git_dir});
+		if (defined $ct) {
+			$rec->[0] = $ct;
 		} else { # may be in another cindex:
 			push @pending, $rec;
 		}
@@ -295,7 +300,7 @@ EOM
 			$git;
 		};
 	}
-	my $jd = join_data($self) or return warn <<EOM;
+	my $jd = $self->retry_reopen(\&join_data, $self) or return warn <<EOM;
 W: cindex.$name.topdir=$self->{topdir} has no usable join data for $cfg_f
 EOM
 	my ($ekeys, $roots, $ibx2root) = @$jd{qw(ekeys roots ibx2root)};
@@ -366,7 +371,7 @@ sub repos_sorted {
 	my @recs = map { [ 0, $_ ] } @_; # PublicInbox::Git objects
 	my @todo = @recs;
 	$pi_cfg->each_cindex(\&load_commit_times, \@todo);
-	@recs = sort { $b->[0] <=> $a->[0] } @recs;
+	@recs = sort { $b->[0] <=> $a->[0] } @recs; # sort by commit time
 }
 
 1;

Re: [PATCH 06/15] cindex: store extensions.objectFormat with repo data

[Eric Wong]

Eric Wong <e@80x24.org> wrote:
> +++ b/lib/PublicInbox/CodeSearch.pm
> @@ -242,15 +247,21 @@ sub paths2roots {
>  	\%ret;
>  }
>  
> +sub load_ct { # retry_reopen cb
> +	my ($self, $git_dir) = @_;
> +	my @ids = docids_of_git_dir $self, $git_dir or return;
> +	for (@ids) {
> +		my $doc = $self->get_doc($_) // next;
> +		return int_val($doc, CT);
> +	}
> +}

Ugh, this should've been introduced in 15/15 but I decided to
reorder the series a bit while barely awake :x

[PATCH v2] codesearch: use retry_reopen for WWW

[Eric Wong]

As with mail search, a cindex may be updated while WWW is
serving requests.  Thus we must reopen the Xapian DB when
the revision we're using becomes stale.
---
v2: avoid reintroducing load_ct as noted in
  https://public-inbox.org/meta/20231130213641.M35664@dcvr/

 lib/PublicInbox/CodeSearch.pm | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/lib/PublicInbox/CodeSearch.pm b/lib/PublicInbox/CodeSearch.pm
index f4694686..3092718d 100644
--- a/lib/PublicInbox/CodeSearch.pm
+++ b/lib/PublicInbox/CodeSearch.pm
@@ -258,15 +258,11 @@ sub load_ct { # retry_reopen cb
 
 sub load_commit_times { # each_cindex callback
 	my ($self, $todo) = @_; # todo = [ [ time, git ], [ time, git ] ...]
-	my (@pending, $rec, $dir, @ids, $doc);
+	my (@pending, $rec, $ct);
 	while ($rec = shift @$todo) {
-		@ids = docids_of_git_dir $self, $rec->[1]->{git_dir};
-		if (@ids) {
-			for (@ids) {
-				$doc = $self->get_doc($_) // next;
-				$rec->[0] = int_val($doc, CT);
-				last;
-			}
+		$ct = $self->retry_reopen(\&load_ct, $rec->[1]->{git_dir});
+		if (defined $ct) {
+			$rec->[0] = $ct;
 		} else { # may be in another cindex:
 			push @pending, $rec;
 		}
@@ -295,7 +291,7 @@ EOM
 			$git;
 		};
 	}
-	my $jd = join_data($self) or return warn <<EOM;
+	my $jd = $self->retry_reopen(\&join_data, $self) or return warn <<EOM;
 W: cindex.$name.topdir=$self->{topdir} has no usable join data for $cfg_f
 EOM
 	my ($ekeys, $roots, $ibx2root) = @$jd{qw(ekeys roots ibx2root)};
@@ -366,7 +362,7 @@ sub repos_sorted {
 	my @recs = map { [ 0, $_ ] } @_; # PublicInbox::Git objects
 	my @todo = @recs;
 	$pi_cfg->each_cindex(\&load_commit_times, \@todo);
-	@recs = sort { $b->[0] <=> $a->[0] } @recs;
+	@recs = sort { $b->[0] <=> $a->[0] } @recs; # sort by commit time
 }
 
 1;

Re: [PATCH 13/15] www_listing: support publicInbox.nameIsUrl

[Kyle Meyer]

Eric Wong writes:

> This is a convenient (and slightly memory-saving) alternative to
> specifying a `publicinbox.*.url' entry for every single inbox
> when using publicinbox.wwwListing.

Nice.

> +=item publicinbox.nameIsUrl
> +
> +Treat the name of the public inbox as it's unqualified URL when

s/it's/its/

[PATCH] doc: config: fix grammar for nameIsUrl

[Eric Wong]

Kyle Meyer <kyle@kyleam.com> wrote:
> Eric Wong writes:
> > +Treat the name of the public inbox as it's unqualified URL when
> 
> s/it's/its/

Thanks, will push this fix out:

-------8<------
Subject: [PATCH] doc: config: fix grammar for nameIsUrl

Reported-by: Kyle Meyer <kyle@kyleam.com>
Link: https://public-inbox.org/meta/87bkbazp5g.fsf@kyleam.com/
---
 Documentation/public-inbox-config.pod | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/public-inbox-config.pod b/Documentation/public-inbox-config.pod
index d2017704..f533ea9d 100644
--- a/Documentation/public-inbox-config.pod
+++ b/Documentation/public-inbox-config.pod
@@ -383,7 +383,7 @@ Default: C<404>
 
 =item publicinbox.nameIsUrl
 
-Treat the name of the public inbox as it's unqualified URL when
+Treat the name of the public inbox as its unqualified URL when
 using C<publicInbox.wwwListing=all>.  This is, every
 C<[publicinbox "foo"]> section implicitly sets C<publicinbox.foo.url=foo>.