* The installer encountered unexpected problem. Please report to
@ 2020-01-18 15:19 wisdomlight--- via
2020-01-19 14:49 ` bug#39177: " Moritz Lell
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: wisdomlight--- via @ 2020-01-18 15:19 UTC (permalink / raw)
To: help-guix@gnu.org, bug-guix@gnu.org
[-- Attachment #1: Type: text/plain, Size: 260 bytes --]
Attached is a photo of my screen.
I am installing on MacBook Air 13”
I had guix already installed but wanted a fresh install.
I used exactly the same usb-image I used before.
So it’s strange that this is happening.
Good luck.
Sent from ProtonMail Mobile
[-- Attachment #2: 13F49124-1FF0-4C5B-8480-DD61FE211953.PNG --]
[-- Type: image/jpg, Size: 1080375 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
* bug#39177: The installer encountered unexpected problem. Please report to
2020-01-18 15:19 The installer encountered unexpected problem. Please report to wisdomlight--- via
2020-01-19 14:49 ` bug#39177: " Moritz Lell
@ 2020-01-19 14:49 ` Moritz Lell
2020-01-19 21:33 ` Ludovic Courtès
2 siblings, 0 replies; 7+ messages in thread
From: Moritz Lell @ 2020-01-19 14:49 UTC (permalink / raw)
To: wisdomlight, help-guix, 39177
On 18.01.20 16:19, wisdomlight--- via Bug reports for GNU Guix wrote:
> Attached is a photo of my screen.
Hi!
your backtrace is missing the last part. Can you scroll down and post
the remaining part?
Cheers,
Moritz
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bug#39177: The installer encountered unexpected problem. Please report to
2020-01-18 15:19 The installer encountered unexpected problem. Please report to wisdomlight--- via
@ 2020-01-19 14:49 ` Moritz Lell
2020-01-19 14:49 ` Moritz Lell
2020-01-19 21:33 ` Ludovic Courtès
2 siblings, 0 replies; 7+ messages in thread
From: Moritz Lell @ 2020-01-19 14:49 UTC (permalink / raw)
To: wisdomlight, help-guix, 39177
On 18.01.20 16:19, wisdomlight--- via Bug reports for GNU Guix wrote:
> Attached is a photo of my screen.
Hi!
your backtrace is missing the last part. Can you scroll down and post
the remaining part?
Cheers,
Moritz
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: The installer encountered unexpected problem. Please report to
2020-01-18 15:19 The installer encountered unexpected problem. Please report to wisdomlight--- via
2020-01-19 14:49 ` bug#39177: " Moritz Lell
2020-01-19 14:49 ` Moritz Lell
@ 2020-01-19 21:33 ` Ludovic Courtès
2020-01-19 21:49 ` wisdomlight
2 siblings, 1 reply; 7+ messages in thread
From: Ludovic Courtès @ 2020-01-19 21:33 UTC (permalink / raw)
To: wisdomlight--- via; +Cc: bug-guix@gnu.org
Hello,
wisdomlight--- via <help-guix@gnu.org> skribis:
> Attached is a photo of my screen.
> I am installing on MacBook Air 13”
> I had guix already installed but wanted a fresh install.
> I used exactly the same usb-image I used before.
>
> So it’s strange that this is happening.
What file system type did you select for your partitions? Also, what
kind of partitioning did you choose (guided, etc.)?
BTW, note that, for Guix System, doing a “fresh install” doesn’t buy you
much in the sense that ‘guix system reconfigure’ amounts to doing a
“fresh install”: the result is the same.
Thanks for your report!
Ludo’.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: The installer encountered unexpected problem. Please report to
2020-01-19 21:33 ` Ludovic Courtès
@ 2020-01-19 21:49 ` wisdomlight
2020-01-19 22:16 ` wisdomlight
0 siblings, 1 reply; 7+ messages in thread
From: wisdomlight @ 2020-01-19 21:49 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: wisdomlight--- via, bug-guix\@gnu.org
Hi
Sherab
Just like an experience in a dream
Everything I now enjoy
Will become a mere recollection
For what has past will not be seen again
Sent from ProtonMail, encrypted email based in Switzerland.
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Sunday, 19 January 2020 21:33, Ludovic Courtès <ludo@gnu.org> wrote:
> Hello,
>
> wisdomlight--- via help-guix@gnu.org skribis:
>
> > Attached is a photo of my screen.
> > I am installing on MacBook Air 13”
> > I had guix already installed but wanted a fresh install.
> > I used exactly the same usb-image I used before.
> > So it’s strange that this is happening.
>
> What file system type did you select for your partitions?
I don't remember but I always choose ext4 for linux install. so i presume it was ext4
Also, what
> kind of partitioning did you choose (guided, etc.)?
guided whole disk without seprate home folder
gpt
It asked me to have at least one partition with the / mount and when I put it it just did not recognize the /
I had problem afterwards when needed to recover the MacosX - the recovery did not recognize the disk.
MacOS offers a Disk Utility so i fiddled around with somethings there and finally managed to make the disk seen and re installed MacOSX
>
> BTW, note that, for Guix System, doing a “fresh install” doesn’t buy you
> much in the sense that ‘guix system reconfigure’ amounts to doing a
> “fresh install”: the result is the same.
Yeah - I got impatient!!!
>
> Thanks for your report!
Pleasure
>
> Ludo’.
Sherab
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: The installer encountered unexpected problem. Please report to
2020-01-19 21:49 ` wisdomlight
@ 2020-01-19 22:16 ` wisdomlight
2020-01-20 14:23 ` wisdomlight
0 siblings, 1 reply; 7+ messages in thread
From: wisdomlight @ 2020-01-19 22:16 UTC (permalink / raw)
To: wisdomlight@protonmail.com
Cc: Ludovic Courtès, wisdomlight--- via, bug-guix\\@gnu.org
OK Folk here's another one for you[this is not complaining this is for you to see if there is a problem somewhere??]:
I wanted to try Guix again.
This time I wanted it on a Librem 13" [instead of Macbook Air][so i can enjoy the libre wifi]
I wanted to have Guix installed next to my already installed Linux Mint.
So I created usb live Guix os
I booted into the usb
Got to the bit when it asks about Partitioning method choose the Manual, created two partitions
1 50.00GB ext4 /
70.00GB Free space
When i was about to continue Format disk? it said we are about to format your hard disk. All its data will be lost Do you wish to continue?
I promptly clicked exit
then the installation menu window appeared and i clicked Abort
it took me to local language window where again i clicked exit
so this cycle of going form one menu to another
Locale language window -> click exit -> installation menu window -> click Abort -> Local language -> click exit -> locale language menu window->click exit -> abort ad infinitum
so I did the only thing I could and that was switching the machine of form the power button.
Now I want to boot back to my Linux Mint and the system is stuck it says
Booting from Hard Disk...
And nothing happens
When I then boot again to the live usb stick with Guix on it - the previous partitioning is till there available as if nothing has happened.
This sounds strange to me. And of course now I cannot boot to my machine.
Not good. [not the end of the world as well because i have a back up and another live usb with linux mint on it and it boots fine]
Sherab
Just like an experience in a dream
Everything I now enjoy
Will become a mere recollection
For what has past will not be seen again
Sent from ProtonMail, encrypted email based in Switzerland.
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Sunday, 19 January 2020 21:49, <wisdomlight@protonmail.com> wrote:
> Hi
>
> Sherab
>
> Just like an experience in a dream
> Everything I now enjoy
> Will become a mere recollection
> For what has past will not be seen again
>
> Sent from ProtonMail, encrypted email based in Switzerland.
>
> Sent with ProtonMail Secure Email.
>
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Sunday, 19 January 2020 21:33, Ludovic Courtès ludo@gnu.org wrote:
>
> > Hello,
> > wisdomlight--- via help-guix@gnu.org skribis:
> >
> > > Attached is a photo of my screen.
> > > I am installing on MacBook Air 13”
> > > I had guix already installed but wanted a fresh install.
> > > I used exactly the same usb-image I used before.
> > > So it’s strange that this is happening.
> >
> > What file system type did you select for your partitions?
>
> I don't remember but I always choose ext4 for linux install. so i presume it was ext4
>
> Also, what
>
> > kind of partitioning did you choose (guided, etc.)?
>
> guided whole disk without seprate home folder
> gpt
>
> It asked me to have at least one partition with the / mount and when I put it it just did not recognize the /
>
> I had problem afterwards when needed to recover the MacosX - the recovery did not recognize the disk.
> MacOS offers a Disk Utility so i fiddled around with somethings there and finally managed to make the disk seen and re installed MacOSX
>
> > BTW, note that, for Guix System, doing a “fresh install” doesn’t buy you
> > much in the sense that ‘guix system reconfigure’ amounts to doing a
> > “fresh install”: the result is the same.
>
> Yeah - I got impatient!!!
>
> > Thanks for your report!
>
> Pleasure
>
> > Ludo’.
>
> Sherab
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: The installer encountered unexpected problem. Please report to
2020-01-19 22:16 ` wisdomlight
@ 2020-01-20 14:23 ` wisdomlight
0 siblings, 0 replies; 7+ messages in thread
From: wisdomlight @ 2020-01-20 14:23 UTC (permalink / raw)
To: wisdomlight@protonmail.com
Cc: Ludovic Courtès, wisdomlight--- via, bug-guix\\@gnu.org
[-- Attachment #1: Type: text/plain, Size: 4782 bytes --]
The attached screenshot might be of interest to you:
What you see is the screen of LMint Live USB.
You can see that on the left under Devices there is a 50 GB - which is the same amount of GB i allocated a partition yesterday. So might it be the partition I created? if it is then this is weird because I aborted the process before I finished creating the partition.
There is also n Error message - which i do not understand.
Maybe you will.
I hope this actually helps improve Guix in one way or another.
Sherab
Just like an experience in a dream
Everything I now enjoy
Will become a mere recollection
For what has past will not be seen again
Sent from ProtonMail, encrypted email based in Switzerland.
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Sunday, January 19, 2020 10:16 PM, <wisdomlight@protonmail.com> wrote:
> OK Folk here's another one for you[this is not complaining this is for you to see if there is a problem somewhere??]:
>
> I wanted to try Guix again.
>
> This time I wanted it on a Librem 13" [instead of Macbook Air][so i can enjoy the libre wifi]
> I wanted to have Guix installed next to my already installed Linux Mint.
>
> So I created usb live Guix os
> I booted into the usb
> Got to the bit when it asks about Partitioning method choose the Manual, created two partitions
> 1 50.00GB ext4 /
> 70.00GB Free space
>
> When i was about to continue Format disk? it said we are about to format your hard disk. All its data will be lost Do you wish to continue?
> I promptly clicked exit
>
> then the installation menu window appeared and i clicked Abort
>
> it took me to local language window where again i clicked exit
>
> so this cycle of going form one menu to another
> Locale language window -> click exit -> installation menu window -> click Abort -> Local language -> click exit -> locale language menu window->click exit -> abort ad infinitum
>
> so I did the only thing I could and that was switching the machine of form the power button.
>
> Now I want to boot back to my Linux Mint and the system is stuck it says
> Booting from Hard Disk...
>
> And nothing happens
>
> When I then boot again to the live usb stick with Guix on it - the previous partitioning is till there available as if nothing has happened.
>
> This sounds strange to me. And of course now I cannot boot to my machine.
>
> Not good. [not the end of the world as well because i have a back up and another live usb with linux mint on it and it boots fine]
>
> Sherab
>
> Just like an experience in a dream
> Everything I now enjoy
> Will become a mere recollection
> For what has past will not be seen again
>
> Sent from ProtonMail, encrypted email based in Switzerland.
>
> Sent with ProtonMail Secure Email.
>
> ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> On Sunday, 19 January 2020 21:49, wisdomlight@protonmail.com wrote:
>
> > Hi
> > Sherab
> > Just like an experience in a dream
> > Everything I now enjoy
> > Will become a mere recollection
> > For what has past will not be seen again
> > Sent from ProtonMail, encrypted email based in Switzerland.
> > Sent with ProtonMail Secure Email.
> > ‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
> > On Sunday, 19 January 2020 21:33, Ludovic Courtès ludo@gnu.org wrote:
> >
> > > Hello,
> > > wisdomlight--- via help-guix@gnu.org skribis:
> > >
> > > > Attached is a photo of my screen.
> > > > I am installing on MacBook Air 13”
> > > > I had guix already installed but wanted a fresh install.
> > > > I used exactly the same usb-image I used before.
> > > > So it’s strange that this is happening.
> > >
> > > What file system type did you select for your partitions?
> >
> > I don't remember but I always choose ext4 for linux install. so i presume it was ext4
> > Also, what
> >
> > > kind of partitioning did you choose (guided, etc.)?
> >
> > guided whole disk without seprate home folder
> > gpt
> > It asked me to have at least one partition with the / mount and when I put it it just did not recognize the /
> > I had problem afterwards when needed to recover the MacosX - the recovery did not recognize the disk.
> > MacOS offers a Disk Utility so i fiddled around with somethings there and finally managed to make the disk seen and re installed MacOSX
> >
> > > BTW, note that, for Guix System, doing a “fresh install” doesn’t buy you
> > > much in the sense that ‘guix system reconfigure’ amounts to doing a
> > > “fresh install”: the result is the same.
> >
> > Yeah - I got impatient!!!
> >
> > > Thanks for your report!
> >
> > Pleasure
> >
> > > Ludo’.
> >
> > Sherab
[-- Attachment #2: Screenshot from 2020-01-20 14-18-39.png --]
[-- Type: image/png, Size: 71814 bytes --]
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-01-20 14:23 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-01-18 15:19 The installer encountered unexpected problem. Please report to wisdomlight--- via
2020-01-19 14:49 ` bug#39177: " Moritz Lell
2020-01-19 14:49 ` Moritz Lell
2020-01-19 21:33 ` Ludovic Courtès
2020-01-19 21:49 ` wisdomlight
2020-01-19 22:16 ` wisdomlight
2020-01-20 14:23 ` wisdomlight
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.