* Second screen - DisplayPort
@ 2021-06-23 9:49 amuza
2021-06-23 16:27 ` Joshua Branson
0 siblings, 1 reply; 6+ messages in thread
From: amuza @ 2021-06-23 9:49 UTC (permalink / raw)
To: help-guix
[-- Attachment #1.1: Type: text/plain, Size: 581 bytes --]
Hello!
I'm new to Guix system, yesterday I installed it for the first time. I
installed it with i3 and Mate.
I would like to use my second monitor, but its DisplayPort connection is
not recognized by xrandr. xrandr only shows my own laptop's screen.
If I connect my second monitor through VGA, xrandr does detect that VGA
connection.
The DisplayPort connection worked fine with Trisquel, I could use my
second monitor, so I guess it's not an issue on software Freedom.
Any suggestion on how to make Guix detect my DisplayPort-connected monitor?
Thank you!
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 801 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Second screen - DisplayPort
2021-06-23 9:49 Second screen - DisplayPort amuza
@ 2021-06-23 16:27 ` Joshua Branson
2021-06-23 22:24 ` amuza
2021-06-23 22:37 ` Leo Famulari
0 siblings, 2 replies; 6+ messages in thread
From: Joshua Branson @ 2021-06-23 16:27 UTC (permalink / raw)
To: amuza; +Cc: help-guix
amuza <amuza@riseup.net> writes:
> Hello!
>
> I'm new to Guix system, yesterday I installed it for the first time. I
> installed it with i3 and Mate.
>
> I would like to use my second monitor, but its DisplayPort connection is
> not recognized by xrandr. xrandr only shows my own laptop's screen.
>
> If I connect my second monitor through VGA, xrandr does detect that VGA
> connection.
>
> The DisplayPort connection worked fine with Trisquel, I could use my
> second monitor, so I guess it's not an issue on software Freedom.
I wish I knew how to help...What's the main difference between HDMI and
display port? Does display port allow one to send video and audio down
the wire?
>
> Any suggestion on how to make Guix detect my DisplayPort-connected monitor?
>
> Thank you!
>
--
Joshua Branson (joshuaBPMan in #guix)
Sent from Emacs and Gnus
https://gnucode.me
https://video.hardlimit.com/accounts/joshua_branson/video-channels
https://propernaming.org
"You can have whatever you want, as long as you help
enough other people get what they want." - Zig Ziglar
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Second screen - DisplayPort
2021-06-23 16:27 ` Joshua Branson
@ 2021-06-23 22:24 ` amuza
2021-06-23 22:37 ` Leo Famulari
1 sibling, 0 replies; 6+ messages in thread
From: amuza @ 2021-06-23 22:24 UTC (permalink / raw)
To: help-guix
Joshua Branson:
> amuza <amuza@riseup.net> writes:
>
>> Hello!
>>
>> I'm new to Guix system, yesterday I installed it for the first time. I
>> installed it with i3 and Mate.
>>
>> I would like to use my second monitor, but its DisplayPort connection is
>> not recognized by xrandr. xrandr only shows my own laptop's screen.
>>
>> If I connect my second monitor through VGA, xrandr does detect that VGA
>> connection.
>>
>> The DisplayPort connection worked fine with Trisquel, I could use my
>> second monitor, so I guess it's not an issue on software Freedom.
>
> I wish I knew how to help...What's the main difference between HDMI and
> display port? Does display port allow one to send video and audio down
> the wire?
>
I don't now if DisplayPort sends audio.
>>
>> Any suggestion on how to make Guix detect my DisplayPort-connected monitor?
>>
I guess there must be a way if it works in Trisquel.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Second screen - DisplayPort
2021-06-23 16:27 ` Joshua Branson
2021-06-23 22:24 ` amuza
@ 2021-06-23 22:37 ` Leo Famulari
2021-06-24 22:33 ` amuza
2021-06-24 22:44 ` amuza
1 sibling, 2 replies; 6+ messages in thread
From: Leo Famulari @ 2021-06-23 22:37 UTC (permalink / raw)
To: Joshua Branson, amuza; +Cc: znavko--- via
DiaplayPort is a (mostly) display interface standard that is unrelated to HDMI:
https://en.wikipedia.org/wiki/DisplayPort
Amuza, does Linux register connections to your DisplayPort interface? You can check the output of dmesg.
What kind of CPU architecture are you using? Maybe some kernel config flag needs to be changed.
On Wed, Jun 23, 2021, at 12:27, Joshua Branson wrote:
> amuza <amuza@riseup.net> writes:
>
> > Hello!
> >
> > I'm new to Guix system, yesterday I installed it for the first time. I
> > installed it with i3 and Mate.
> >
> > I would like to use my second monitor, but its DisplayPort connection is
> > not recognized by xrandr. xrandr only shows my own laptop's screen.
> >
> > If I connect my second monitor through VGA, xrandr does detect that VGA
> > connection.
> >
> > The DisplayPort connection worked fine with Trisquel, I could use my
> > second monitor, so I guess it's not an issue on software Freedom.
>
> I wish I knew how to help...What's the main difference between HDMI and
> display port? Does display port allow one to send video and audio down
> the wire?
>
> >
> > Any suggestion on how to make Guix detect my DisplayPort-connected monitor?
> >
> > Thank you!
> >
>
> --
> Joshua Branson (joshuaBPMan in #guix)
> Sent from Emacs and Gnus
> https://gnucode.me
> https://video.hardlimit.com/accounts/joshua_branson/video-channels
> https://propernaming.org
> "You can have whatever you want, as long as you help
> enough other people get what they want." - Zig Ziglar
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Second screen - DisplayPort
2021-06-23 22:37 ` Leo Famulari
@ 2021-06-24 22:33 ` amuza
2021-06-24 22:44 ` amuza
1 sibling, 0 replies; 6+ messages in thread
From: amuza @ 2021-06-24 22:33 UTC (permalink / raw)
To: Leo Famulari, Joshua Branson; +Cc: znavko--- via
Thank you.
dmesg shows nothing at all when connecting to the DisplayPort port of my
docking station.
However, when connecting to the mini DisplayPort port of the laptop
itself, it shows this message repeatedly:
[27925.506913] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27925.506929] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
[27932.624065] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27932.624082] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
[27939.367201] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27939.367217] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
[27946.522991] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27946.523008] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
[27953.348859] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27953.348875] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
[27960.178545] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27960.178561] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
[27967.366446] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27967.366462] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
[27974.431155] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27974.431172] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
[27980.786265] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at
103048 [ PRIVRING ]
[27980.786281] nouveau 0000:01:00.0: bus: MMIO write of 00000000 FAULT
at 103048 [ PRIVRING ]
With Trisquel it worked good on both ports (normal DisplayPort of the
docking station and mini-DisplayPort of the laptop itself).
Leo Famulari:
> DiaplayPort is a (mostly) display interface standard that is unrelated to HDMI:
>
> https://en.wikipedia.org/wiki/DisplayPort
>
> Amuza, does Linux register connections to your DisplayPort interface? You can check the output of dmesg.
>
> What kind of CPU architecture are you using? Maybe some kernel config flag needs to be changed.
>
> On Wed, Jun 23, 2021, at 12:27, Joshua Branson wrote:
>> amuza <amuza@riseup.net> writes:
>>
>>> Hello!
>>>
>>> I'm new to Guix system, yesterday I installed it for the first time. I
>>> installed it with i3 and Mate.
>>>
>>> I would like to use my second monitor, but its DisplayPort connection is
>>> not recognized by xrandr. xrandr only shows my own laptop's screen.
>>>
>>> If I connect my second monitor through VGA, xrandr does detect that VGA
>>> connection.
>>>
>>> The DisplayPort connection worked fine with Trisquel, I could use my
>>> second monitor, so I guess it's not an issue on software Freedom.
>>
>> I wish I knew how to help...What's the main difference between HDMI and
>> display port? Does display port allow one to send video and audio down
>> the wire?
>>
>>>
>>> Any suggestion on how to make Guix detect my DisplayPort-connected monitor?
>>>
>>> Thank you!
>>>
>>
>> --
>> Joshua Branson (joshuaBPMan in #guix)
>> Sent from Emacs and Gnus
>> https://gnucode.me
>> https://video.hardlimit.com/accounts/joshua_branson/video-channels
>> https://propernaming.org
>> "You can have whatever you want, as long as you help
>> enough other people get what they want." - Zig Ziglar
>>
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Second screen - DisplayPort
2021-06-23 22:37 ` Leo Famulari
2021-06-24 22:33 ` amuza
@ 2021-06-24 22:44 ` amuza
1 sibling, 0 replies; 6+ messages in thread
From: amuza @ 2021-06-24 22:44 UTC (permalink / raw)
To: Leo Famulari, Joshua Branson; +Cc: znavko--- via
CPU architecture is x86_64
It is a Lenovo T430.
Please let me know if you need any other info to help me.
Leo Famulari:
> DiaplayPort is a (mostly) display interface standard that is unrelated to HDMI:
>
> https://en.wikipedia.org/wiki/DisplayPort
>
> Amuza, does Linux register connections to your DisplayPort interface? You can check the output of dmesg.
>
> What kind of CPU architecture are you using? Maybe some kernel config flag needs to be changed.
>
> On Wed, Jun 23, 2021, at 12:27, Joshua Branson wrote:
>> amuza <amuza@riseup.net> writes:
>>
>>> Hello!
>>>
>>> I'm new to Guix system, yesterday I installed it for the first time. I
>>> installed it with i3 and Mate.
>>>
>>> I would like to use my second monitor, but its DisplayPort connection is
>>> not recognized by xrandr. xrandr only shows my own laptop's screen.
>>>
>>> If I connect my second monitor through VGA, xrandr does detect that VGA
>>> connection.
>>>
>>> The DisplayPort connection worked fine with Trisquel, I could use my
>>> second monitor, so I guess it's not an issue on software Freedom.
>>
>> I wish I knew how to help...What's the main difference between HDMI and
>> display port? Does display port allow one to send video and audio down
>> the wire?
>>
>>>
>>> Any suggestion on how to make Guix detect my DisplayPort-connected monitor?
>>>
>>> Thank you!
>>>
>>
>> --
>> Joshua Branson (joshuaBPMan in #guix)
>> Sent from Emacs and Gnus
>> https://gnucode.me
>> https://video.hardlimit.com/accounts/joshua_branson/video-channels
>> https://propernaming.org
>> "You can have whatever you want, as long as you help
>> enough other people get what they want." - Zig Ziglar
>>
>>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-06-24 22:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-06-23 9:49 Second screen - DisplayPort amuza
2021-06-23 16:27 ` Joshua Branson
2021-06-23 22:24 ` amuza
2021-06-23 22:37 ` Leo Famulari
2021-06-24 22:33 ` amuza
2021-06-24 22:44 ` amuza
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.