This patch adds support for nRF52 series devices. It is patchset 7 from http://openocd.zylin.com/#/c/3511/ , which has been tested, but not merged yet in master. From: Michael Dietz Date: Mon, 30 May 2016 12:50:44 +0000 (-0700) Subject: Added support for nRF52 Series Devices. X-Git-Url: http://openocd.zylin.com/gitweb?p=openocd.git;a=commitdiff_plain;h=9ba15633e221d9d72e320372ba8f49d3f30d4bce Added support for nRF52 Series Devices. Both nrf52.c and nrf52.cfg are based off of previous nRF51 files. - Some possible race conditions with NVMC have been fixed in nRF52.c - Removed nrf51_get_probed_chip_if_halted() as the core does not have to be halted to perform operations where it is called. - Only registers that are needed by openOCD are defined, some registers in nRF51 don't exist in nRF52 and are removed. - Some all around cleanup has been done. - The protection mechanism is completely different on nRF52 and this has not been implemented yet - just prints a warning and returns for now. Change-Id: I4dd42c86f33f450709bb981806c2655f04aa6201 Signed-off-by: Michael Dietz --- diff --git a/src/flash/nor/Makefile.am b/src/flash/nor/Makefile.am index c167e8f..b6a2be3 100644 --- a/src/flash/nor/Makefile.am +++ b/src/flash/nor/Makefile.am @@ -37,6 +37,7 @@ NOR_DRIVERS = \ niietcm4.c \ non_cfi.c \ nrf51.c \ + nrf52.c \ numicro.c \ ocl.c \ pic32mx.c \ diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c index 56a5cb2..3e071bd 100644 --- a/src/flash/nor/drivers.c +++ b/src/flash/nor/drivers.c @@ -48,6 +48,7 @@ extern struct flash_driver mdr_flash; extern struct flash_driver mrvlqspi_flash; extern struct flash_driver niietcm4_flash; extern struct flash_driver nrf51_flash; +extern struct flash_driver nrf52_flash; extern struct flash_driver numicro_flash; extern struct flash_driver ocl_flash; extern struct flash_driver pic32mx_flash; @@ -100,6 +101,7 @@ static struct flash_driver *flash_drivers[] = { &mrvlqspi_flash, &niietcm4_flash, &nrf51_flash, + &nrf52_flash, &numicro_flash, &ocl_flash, &pic32mx_flash, diff --git a/src/flash/nor/nrf52.c b/src/flash/nor/nrf52.c new file mode 100644 index 0000000..7f2bd35 --- /dev/null +++ b/src/flash/nor/nrf52.c @@ -0,0 +1,733 @@ +/*************************************************************************** + * Copyright (C) 2013 Synapse Product Development * + * Andrey Smirnov * + * Angus Gratton * + * Erdem U. Altunyurt * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program. If not, see . * + ***************************************************************************/ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include + +#include "imp.h" +#include +#include +#include + +/* nRF52 Register addresses used by openOCD. */ +#define NRF52_FLASH_BASE_ADDR (0x0) + +#define NRF52_FICR_BASE_ADDR (0x10000000) +#define NRF52_FICR_CODEPAGESIZE_ADDR (NRF52_FICR_BASE_ADDR | 0x010) +#define NRF52_FICR_CODESIZE_ADDR (NRF52_FICR_BASE_ADDR | 0x014) + +#define NRF52_UICR_BASE_ADDR (0x10001000) + +#define NRF52_NVMC_BASE_ADDR (0x4001E000) +#define NRF52_NVMC_READY_ADDR (NRF52_NVMC_BASE_ADDR | 0x400) +#define NRF52_NVMC_CONFIG_ADDR (NRF52_NVMC_BASE_ADDR | 0x504) +#define NRF52_NVMC_ERASEPAGE_ADDR (NRF52_NVMC_BASE_ADDR | 0x508) +#define NRF52_NVMC_ERASEALL_ADDR (NRF52_NVMC_BASE_ADDR | 0x50C) +#define NRF52_NVMC_ERASEUICR_ADDR (NRF52_NVMC_BASE_ADDR | 0x514) + +/* nRF52 bit fields. */ +enum nrf52_nvmc_config_bits { + NRF52_NVMC_CONFIG_REN = 0x0, + NRF52_NVMC_CONFIG_WEN = 0x01, + NRF52_NVMC_CONFIG_EEN = 0x02 +}; + +enum nrf52_nvmc_ready_bits { + NRF52_NVMC_BUSY = 0x0, + NRF52_NVMC_READY = 0x01 +}; + +/* nRF52 state information. */ +struct nrf52_info { + uint32_t code_page_size; /* Size of FLASH page in bytes. */ + uint32_t code_memory_size; /* Size of Code FLASH region in bytes. */ + + struct { + bool probed; + int (*write) (struct flash_bank *bank, + struct nrf52_info *chip, + const uint8_t *buffer, uint32_t offset, uint32_t count); + } bank[2]; /* There are two regions in nRF52 FLASH - Code and UICR. */ + struct target *target; +}; + +static int nrf52_protect_check(struct flash_bank *bank); + +static int nrf52_probe(struct flash_bank *bank) +{ + int res; + struct nrf52_info *chip = bank->driver_priv; + assert(chip != NULL); + + res = target_read_u32(chip->target, + NRF52_FICR_CODEPAGESIZE_ADDR, + &chip->code_page_size); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read code page size"); + return res; + } + + res = target_read_u32(chip->target, + NRF52_FICR_CODESIZE_ADDR, + &chip->code_memory_size); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read code memory size"); + return res; + } + + chip->code_memory_size = chip->code_memory_size * chip->code_page_size; + + if (bank->base == NRF52_FLASH_BASE_ADDR) { + bank->size = chip->code_memory_size; + bank->num_sectors = bank->size / chip->code_page_size; + bank->sectors = calloc(bank->num_sectors, + sizeof((bank->sectors)[0])); + if (!bank->sectors) + return ERROR_FLASH_BANK_NOT_PROBED; + + /* Fill out the sector information: All nRF51 sectors are the same size. */ + for (int i = 0; i < bank->num_sectors; i++) { + bank->sectors[i].size = chip->code_page_size; + bank->sectors[i].offset = i * chip->code_page_size; + + /* Mark as unknown. */ + bank->sectors[i].is_erased = -1; + bank->sectors[i].is_protected = -1; + } + + nrf52_protect_check(bank); + + chip->bank[0].probed = true; + } else { /* This is the UICR bank. */ + bank->size = chip->code_page_size; + bank->num_sectors = 1; + bank->sectors = calloc(bank->num_sectors, + sizeof((bank->sectors)[0])); + if (!bank->sectors) + return ERROR_FLASH_BANK_NOT_PROBED; + + bank->sectors[0].size = bank->size; + bank->sectors[0].offset = 0; + + bank->sectors[0].is_erased = -1; + bank->sectors[0].is_protected = -1; + + chip->bank[1].probed = true; + } + + return ERROR_OK; +} + +static int nrf52_bank_is_probed(struct flash_bank *bank) +{ + struct nrf52_info *chip = bank->driver_priv; + assert(chip != NULL); + + return chip->bank[bank->bank_number].probed; +} + +static int nrf52_auto_probe(struct flash_bank *bank) +{ + if (!nrf52_bank_is_probed(bank)) + return nrf52_probe(bank); + else + return ERROR_OK; +} + +static int nrf52_wait_for_nvmc(struct nrf52_info *chip) +{ + int res; + uint32_t ready; + int timeout = 100; + + do { + res = target_read_u32(chip->target, NRF52_NVMC_READY_ADDR, &ready); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read NVMC_READY register"); + return res; + } + + if (ready == NRF52_NVMC_READY) + return ERROR_OK; + + alive_sleep(1); + } while (timeout--); + + LOG_DEBUG("Timed out waiting for the NVMC to be ready"); + return ERROR_FLASH_BUSY; +} + +static int nrf52_nvmc_erase_enable(struct nrf52_info *chip) +{ + int res; + + res = nrf52_wait_for_nvmc(chip); + if (res != ERROR_OK) + return res; + + res = target_write_u32(chip->target, + NRF52_NVMC_CONFIG_ADDR, + NRF52_NVMC_CONFIG_EEN); + if (res != ERROR_OK) { + LOG_ERROR("Failed to configure the NVMC for erasing"); + return res; + } + + return res; +} + +static int nrf52_nvmc_write_enable(struct nrf52_info *chip) +{ + int res; + + res = nrf52_wait_for_nvmc(chip); + if (res != ERROR_OK) + return res; + + res = target_write_u32(chip->target, + NRF52_NVMC_CONFIG_ADDR, + NRF52_NVMC_CONFIG_WEN); + if (res != ERROR_OK) { + LOG_ERROR("Failed to configure the NVMC for writing"); + return res; + } + + return res; +} + +static int nrf52_nvmc_read_only(struct nrf52_info *chip) +{ + int res; + + res = nrf52_wait_for_nvmc(chip); + if (res != ERROR_OK) + return res; + + res = target_write_u32(chip->target, + NRF52_NVMC_CONFIG_ADDR, + NRF52_NVMC_CONFIG_REN); + if (res != ERROR_OK) { + LOG_ERROR("Failed to configure the NVMC for read-only"); + return res; + } + + return res; +} + +static int nrf52_nvmc_generic_erase(struct nrf52_info *chip, + uint32_t erase_register, + uint32_t erase_value) +{ + int res; + + res = nrf52_nvmc_erase_enable(chip); + if (res != ERROR_OK) + return res; + + res = target_write_u32(chip->target, + erase_register, + erase_value); + if (res != ERROR_OK) + LOG_ERROR("Failed to write NVMC erase register"); + + return nrf52_nvmc_read_only(chip); +} + +static int nrf52_protect_check(struct flash_bank *bank) +{ + LOG_WARNING("nrf52_protect_check() is not implemented for nRF52 series devices yet"); + return ERROR_OK; +} + +static int nrf52_protect(struct flash_bank *bank, int set, int first, int last) +{ + LOG_WARNING("nrf52_protect() is not implemented for nRF52 series devices yet"); + return ERROR_OK; +} + +static struct flash_sector *nrf52_find_sector_by_address(struct flash_bank *bank, uint32_t address) +{ + struct nrf52_info *chip = bank->driver_priv; + assert(chip != NULL); + + for (int i = 0; i < bank->num_sectors; i++) + if (bank->sectors[i].offset <= address && + address < (bank->sectors[i].offset + chip->code_page_size)) { + return &bank->sectors[i]; + } + + return NULL; +} + +static int nrf52_erase_all(struct nrf52_info *chip) +{ + LOG_DEBUG("Erasing all non-volatile memory"); + return nrf52_nvmc_generic_erase(chip, + NRF52_NVMC_ERASEALL_ADDR, + 0x01); +} + +static int nrf52_erase_page(struct flash_bank *bank, + struct nrf52_info *chip, + struct flash_sector *sector) +{ + int res; + + LOG_DEBUG("Erasing page at 0x%"PRIx32, sector->offset); + if (sector->is_protected == 1) { + LOG_ERROR("Cannot erase protected sector at 0x%" PRIx32, sector->offset); + return ERROR_FAIL; + } + + if (bank->base == NRF52_UICR_BASE_ADDR) { + res = nrf52_nvmc_generic_erase(chip, + NRF52_NVMC_ERASEUICR_ADDR, + 0x00000001); + } else { + res = nrf52_nvmc_generic_erase(chip, + NRF52_NVMC_ERASEPAGE_ADDR, + sector->offset); + } + + if (res == ERROR_OK) + sector->is_erased = 1; + return res; +} + +static const uint8_t nrf52_flash_write_code[] = { + /* See contrib/loaders/flash/cortex-m0.S */ + /* : */ + 0x0d, 0x68, /* ldr r5, [r1, #0] */ + 0x00, 0x2d, /* cmp r5, #0 */ + 0x0b, 0xd0, /* beq.n 1e */ + 0x4c, 0x68, /* ldr r4, [r1, #4] */ + 0xac, 0x42, /* cmp r4, r5 */ + 0xf9, 0xd0, /* beq.n 0 */ + 0x20, 0xcc, /* ldmia r4!, {r5} */ + 0x20, 0xc3, /* stmia r3!, {r5} */ + 0x94, 0x42, /* cmp r4, r2 */ + 0x01, 0xd3, /* bcc.n 18 */ + 0x0c, 0x46, /* mov r4, r1 */ + 0x08, 0x34, /* adds r4, #8 */ + /* : */ + 0x4c, 0x60, /* str r4, [r1, #4] */ + 0x04, 0x38, /* subs r0, #4 */ + 0xf0, 0xd1, /* bne.n 0 */ + /* : */ + 0x00, 0xbe /* bkpt 0x0000 */ +}; + + +/* Start a low level flash write for the specified region */ +static int nrf52_ll_flash_write(struct nrf52_info *chip, uint32_t offset, const uint8_t *buffer, uint32_t bytes) +{ + struct target *target = chip->target; + uint32_t buffer_size = 8192; + struct working_area *write_algorithm; + struct working_area *source; + uint32_t address = NRF52_FLASH_BASE_ADDR + offset; + struct reg_param reg_params[4]; + struct armv7m_algorithm armv7m_info; + int retval = ERROR_OK; + + LOG_DEBUG("Writing buffer to flash offset=0x%"PRIx32" bytes=0x%"PRIx32, offset, bytes); + assert(bytes % 4 == 0); + + /* allocate working area with flash programming code */ + if (target_alloc_working_area(target, sizeof(nrf52_flash_write_code), + &write_algorithm) != ERROR_OK) { + LOG_WARNING("no working area available, falling back to slow memory writes"); + + for (; bytes > 0; bytes -= 4) { + retval = target_write_memory(chip->target, + offset, 4, 1, buffer); + if (retval != ERROR_OK) + return retval; + + retval = nrf52_wait_for_nvmc(chip); + if (retval != ERROR_OK) + return retval; + + offset += 4; + buffer += 4; + } + + return ERROR_OK; + } + + LOG_WARNING("using fast async flash loader. This is currently supported"); + LOG_WARNING("only with ST-Link and CMSIS-DAP. If you have issues, add"); + LOG_WARNING("\"set WORKAREASIZE 0\" before sourcing nrf52.cfg to disable it"); + + retval = target_write_buffer(target, write_algorithm->address, + sizeof(nrf52_flash_write_code), + nrf52_flash_write_code); + if (retval != ERROR_OK) + return retval; + + /* memory buffer */ + while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK) { + buffer_size /= 2; + buffer_size &= ~3UL; /* Make sure it's 4 byte aligned */ + if (buffer_size <= 256) { + /* free working area, write algorithm already allocated */ + target_free_working_area(target, write_algorithm); + + LOG_WARNING("No large enough working area available, can't do block memory writes"); + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + } + } + + armv7m_info.common_magic = ARMV7M_COMMON_MAGIC; + armv7m_info.core_mode = ARM_MODE_THREAD; + + init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* byte count */ + init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer start */ + init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* buffer end */ + init_reg_param(®_params[3], "r3", 32, PARAM_IN_OUT); /* target address */ + + buf_set_u32(reg_params[0].value, 0, 32, bytes); + buf_set_u32(reg_params[1].value, 0, 32, source->address); + buf_set_u32(reg_params[2].value, 0, 32, source->address + source->size); + buf_set_u32(reg_params[3].value, 0, 32, address); + + retval = target_run_flash_async_algorithm(target, buffer, bytes/4, 4, + 0, NULL, + 4, reg_params, + source->address, source->size, + write_algorithm->address, 0, + &armv7m_info); + + target_free_working_area(target, source); + target_free_working_area(target, write_algorithm); + + destroy_reg_param(®_params[0]); + destroy_reg_param(®_params[1]); + destroy_reg_param(®_params[2]); + destroy_reg_param(®_params[3]); + + return retval; +} + +/* Check and erase flash sectors in specified range, then start a low level page write. + start/end must be sector aligned. +*/ +static int nrf52_write_pages(struct flash_bank *bank, uint32_t start, uint32_t end, const uint8_t *buffer) +{ + int res; + uint32_t offset; + struct flash_sector *sector; + struct nrf52_info *chip = bank->driver_priv; + assert(chip != NULL); + + assert(start % chip->code_page_size == 0); + assert(end % chip->code_page_size == 0); + + /* Erase all sectors */ + for (offset = start; offset < end; offset += chip->code_page_size) { + sector = nrf52_find_sector_by_address(bank, offset); + + if (sector == NULL) { + LOG_ERROR("Invalid sector @ 0x%08"PRIx32, offset); + return ERROR_FLASH_SECTOR_INVALID; + } + + if (sector->is_protected == 1) { + LOG_ERROR("Can't erase protected sector @ 0x%08"PRIx32, offset); + return ERROR_FAIL; + } + + if (sector->is_erased != 1) { /* 1 = erased, 0= not erased, -1 = unknown */ + res = nrf52_erase_page(bank, chip, sector); + if (res != ERROR_OK) { + LOG_ERROR("Failed to erase sector @ 0x%08"PRIx32, sector->offset); + return res; + } + } + sector->is_erased = 1; + } + + res = nrf52_nvmc_write_enable(chip); + if (res != ERROR_OK) + return res; + + res = nrf52_ll_flash_write(chip, start, buffer, (end - start)); + if (res != ERROR_OK) { + LOG_ERROR("Failed to write FLASH"); + nrf52_nvmc_read_only(chip); + return res; + } + + return nrf52_nvmc_read_only(chip); +} + +static int nrf52_erase(struct flash_bank *bank, int first, int last) +{ + int res = ERROR_OK; + struct nrf52_info *chip = bank->driver_priv; + assert(chip != NULL); + + /* For each sector to be erased */ + for (int s = first; s <= last && res == ERROR_OK; s++) + res = nrf52_erase_page(bank, chip, &bank->sectors[s]); + + return res; +} + +static int nrf52_code_flash_write(struct flash_bank *bank, + struct nrf52_info *chip, + const uint8_t *buffer, uint32_t offset, uint32_t count) +{ + int res; + /* Need to perform reads to fill any gaps we need to preserve in the first page, + before the start of buffer, or in the last page, after the end of buffer */ + uint32_t first_page = offset / chip->code_page_size; + uint32_t last_page = DIV_ROUND_UP(offset+count, chip->code_page_size); + + uint32_t first_page_offset = first_page * chip->code_page_size; + uint32_t last_page_offset = last_page * chip->code_page_size; + + LOG_DEBUG("Padding write from 0x%08"PRIx32"-0x%08"PRIx32" as 0x%08"PRIx32"-0x%08"PRIx32, + offset, offset+count, first_page_offset, last_page_offset); + + uint32_t page_cnt = last_page - first_page; + uint8_t buffer_to_flash[page_cnt * chip->code_page_size]; + + /* Fill in any space between start of first page and start of buffer */ + uint32_t pre = offset - first_page_offset; + if (pre > 0) { + res = target_read_memory(bank->target, first_page_offset, 1, pre, buffer_to_flash); + if (res != ERROR_OK) + return res; + } + + /* Fill in main contents of buffer */ + memcpy(buffer_to_flash + pre, buffer, count); + + /* Fill in any space between end of buffer and end of last page */ + uint32_t post = last_page_offset - (offset + count); + if (post > 0) { + /* Retrieve the full row contents from Flash */ + res = target_read_memory(bank->target, offset + count, 1, post, buffer_to_flash + pre + count); + if (res != ERROR_OK) + return res; + } + + return nrf52_write_pages(bank, first_page_offset, last_page_offset, buffer_to_flash); +} + +static int nrf52_uicr_flash_write(struct flash_bank *bank, + struct nrf52_info *chip, + const uint8_t *buffer, uint32_t offset, uint32_t count) +{ + int res; + uint32_t nrf52_uicr_size = chip->code_page_size; + uint8_t uicr[nrf52_uicr_size]; + struct flash_sector *sector = &bank->sectors[0]; + + if ((offset + count) > nrf52_uicr_size) + return ERROR_FAIL; + + res = target_read_memory(bank->target, NRF52_UICR_BASE_ADDR, 1, nrf52_uicr_size, uicr); + + if (res != ERROR_OK) + return res; + + if (sector->is_erased != 1) { + res = nrf52_erase_page(bank, chip, sector); + if (res != ERROR_OK) + return res; + } + + memcpy(&uicr[offset], buffer, count); + + res = nrf52_nvmc_write_enable(chip); + if (res != ERROR_OK) + return res; + + res = nrf52_ll_flash_write(chip, NRF52_UICR_BASE_ADDR, uicr, nrf52_uicr_size); + if (res != ERROR_OK) { + nrf52_nvmc_read_only(chip); + return res; + } + + return nrf52_nvmc_read_only(chip); +} + + +static int nrf52_write(struct flash_bank *bank, const uint8_t *buffer, + uint32_t offset, uint32_t count) +{ + struct nrf52_info *chip = bank->driver_priv; + assert(chip != NULL); + + return chip->bank[bank->bank_number].write(bank, chip, buffer, offset, count); +} + + +FLASH_BANK_COMMAND_HANDLER(nrf52_flash_bank_command) +{ + static struct nrf52_info *chip; + + assert(bank != NULL); + + switch (bank->base) { + case NRF52_FLASH_BASE_ADDR: + bank->bank_number = 0; + break; + case NRF52_UICR_BASE_ADDR: + bank->bank_number = 1; + break; + default: + LOG_ERROR("Invalid bank address 0x%08" PRIx32, bank->base); + return ERROR_FAIL; + } + + if (!chip) { + /* Create a new chip */ + chip = calloc(1, sizeof(*chip)); + assert(chip != NULL); + + chip->target = bank->target; + } + + switch (bank->base) { + case NRF52_FLASH_BASE_ADDR: + chip->bank[bank->bank_number].write = nrf52_code_flash_write; + break; + case NRF52_UICR_BASE_ADDR: + chip->bank[bank->bank_number].write = nrf52_uicr_flash_write; + break; + } + + chip->bank[bank->bank_number].probed = false; + bank->driver_priv = chip; + + return ERROR_OK; +} + +COMMAND_HANDLER(nrf52_handle_mass_erase_command) +{ + int res; + struct flash_bank *bank = NULL; + struct target *target = get_current_target(CMD_CTX); + + res = get_flash_bank_by_addr(target, NRF52_FLASH_BASE_ADDR, true, &bank); + if (res != ERROR_OK) + return res; + + assert(bank != NULL); + + struct nrf52_info *chip = bank->driver_priv; + assert(chip != NULL); + + res = nrf52_erase_all(chip); + if (res != ERROR_OK) { + LOG_ERROR("Failed to erase the chip"); + nrf52_protect_check(bank); + return res; + } + + for (int i = 0; i < bank->num_sectors; i++) + bank->sectors[i].is_erased = 1; + + res = nrf52_protect_check(bank); + if (res != ERROR_OK) { + LOG_ERROR("Failed to check chip's write protection"); + return res; + } + + res = get_flash_bank_by_addr(target, NRF52_UICR_BASE_ADDR, true, &bank); + if (res != ERROR_OK) + return res; + + bank->sectors[0].is_erased = 1; + + return ERROR_OK; +} + +static int nrf52_info(struct flash_bank *bank, char *buf, int buf_size) +{ + int res; + uint32_t ficr[2]; + struct nrf52_info *chip = bank->driver_priv; + assert(chip != NULL); + + res = target_read_u32(chip->target, NRF52_FICR_CODEPAGESIZE_ADDR, &ficr[0]); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read NVMC_READY register"); + return res; + } + + res = target_read_u32(chip->target, NRF52_FICR_CODESIZE_ADDR, &ficr[1]); + if (res != ERROR_OK) { + LOG_ERROR("Couldn't read NVMC_READY register"); + return res; + } + + snprintf(buf, buf_size, + "\n--------nRF52 Series Device--------\n\n" + "\n[factory information control block]\n" + "code page size: %"PRIu32"B\n" + "code memory size: %"PRIu32"kB\n", + ficr[0], + (ficr[1] * ficr[0]) / 1024); + + return ERROR_OK; +} + +static const struct command_registration nrf52_exec_command_handlers[] = { + { + .name = "mass_erase", + .handler = nrf52_handle_mass_erase_command, + .mode = COMMAND_EXEC, + .help = "Erase all flash contents of the chip.", + }, + COMMAND_REGISTRATION_DONE +}; + +static const struct command_registration nrf52_command_handlers[] = { + { + .name = "nrf52", + .mode = COMMAND_ANY, + .help = "nrf52 flash command group", + .usage = "", + .chain = nrf52_exec_command_handlers, + }, + COMMAND_REGISTRATION_DONE +}; + +struct flash_driver nrf52_flash = { + .name = "nrf52", + .commands = nrf52_command_handlers, + .flash_bank_command = nrf52_flash_bank_command, + .info = nrf52_info, + .erase = nrf52_erase, + .protect = nrf52_protect, + .write = nrf52_write, + .read = default_flash_read, + .probe = nrf52_probe, + .auto_probe = nrf52_auto_probe, + .erase_check = default_flash_blank_check, + .protect_check = nrf52_protect_check, +}; diff --git a/tcl/target/nrf52.cfg b/tcl/target/nrf52.cfg index c1cbf1a..a2567ff 100644 --- a/tcl/target/nrf52.cfg +++ b/tcl/target/nrf52.cfg @@ -5,15 +5,22 @@ source [find target/swj-dp.tcl] if { [info exists CHIPNAME] } { - set _CHIPNAME $CHIPNAME + set _CHIPNAME $CHIPNAME } else { - set _CHIPNAME nrf52 + set _CHIPNAME nrf52 +} + +# Work-area is a space in RAM used for flash programming, by default use 16kB. +if { [info exists WORKAREASIZE] } { + set _WORKAREASIZE $WORKAREASIZE +} else { + set _WORKAREASIZE 0x4000 } if { [info exists CPUTAPID] } { - set _CPUTAPID $CPUTAPID + set _CPUTAPID $CPUTAPID } else { - set _CPUTAPID 0x2ba01477 + set _CPUTAPID 0x2ba01477 } swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID @@ -21,8 +28,15 @@ swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME -adapter_khz 10000 +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0 -if { ![using_hla] } { - cortex_m reset_config sysresetreq +if {![using_hla]} { + cortex_m reset_config sysresetreq } + +flash bank $_CHIPNAME.flash nrf52 0x00000000 0 1 1 $_TARGETNAME +flash bank $_CHIPNAME.uicr nrf52 0x10001000 0 1 1 $_TARGETNAME + +adapter_khz 1000 + +$_TARGETNAME configure -event reset-end {}