* How to bump a package version locally? @ 2023-10-18 18:24 Hiep Pham 2023-10-18 19:00 ` wolf 2023-10-20 13:15 ` Simon Tournier 0 siblings, 2 replies; 6+ messages in thread From: Hiep Pham @ 2023-10-18 18:24 UTC (permalink / raw) To: help-guix Hi, I want to bump `jsonnet` version from 0.17.0 to 0.20.0 from the master branch of the `guix` repository. I edited the version in `gnu/packages/cpp.scm`: (define-public jsonnet (package (name "jsonnet") (version "0.20.0") [snip] )) *How do I test building/installing this change locally?* Here what I tried so far: 1. Standing at the root of the `guix` repository, build with: guix build -L . jsonnet This failed: ``` guix build: warning: failed to load '(build-aux build-self)': no code for module (build-aux build-self) ./build-aux/build-self.scm:19:0: warning: module name (build-self) does not match file name 'build-aux/build-self.scm' hint: File `./build-aux/build-self.scm' should probably start with: (define-module (build-aux build-self)) guix build: All 92 channel news entries are valid. guix build: warning: failed to load '(build-aux check-channel-news)': no code for module (build-aux check-channel-news) hint: File `./build-aux/check-channel-news.scm' should probably start with: (define-module (build-aux check-channel-news)) [snip] guix build: warning: failed to load '(build-aux compile-all)': ``` 2. Followed the contributing guide [1], I created a shell instead: guix shell -C -D guix git help2man strace ./bootstrap ./configure --localstatedir=/var This generated `pre-inst-env`, but `make` step failed with: ``` MAKEINFO doc/guix.de.info contributing.de.texi:1659: @menu reference to nonexistent node `Configuring Git' contributing.de.texi:1660: @menu reference to nonexistent node `Sending a Patch Series' make[2]: *** [Makefile:5003: doc/guix.de.info] Error 1 ``` So I was blocked to progress further :( [1] https://guix.gnu.org/manual/en/guix.html#Contributing -- Hiep ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to bump a package version locally? 2023-10-18 18:24 How to bump a package version locally? Hiep Pham @ 2023-10-18 19:00 ` wolf 2023-10-19 16:47 ` Hiep Pham 2023-10-20 13:15 ` Simon Tournier 1 sibling, 1 reply; 6+ messages in thread From: wolf @ 2023-10-18 19:00 UTC (permalink / raw) To: Hiep Pham; +Cc: help-guix [-- Attachment #1: Type: text/plain, Size: 4261 bytes --] On 2023-10-18 18:24:48 +0000, Hiep Pham wrote: > Hi, > > I want to bump `jsonnet` version from 0.17.0 to 0.20.0 from the master > branch of the `guix` repository. I edited the version in > `gnu/packages/cpp.scm`: > > (define-public jsonnet > (package > (name "jsonnet") > (version "0.20.0") > [snip] > )) FYI You will need to do some more changes, just version bump sadly does not build: $ guix shell jsonnet --no-offload --with-version=jsonnet=0.20.0 guix shell: warning: cannot authenticate source of 'jsonnet', version 0.20.0 updating checkout of 'https://github.com/google/jsonnet'... retrieved commit f45e01d632b29e4c0757ec7ba188ce759298e6d3 The following derivation will be built: /gnu/store/d5pndfws378w22c7580fm4w517hfrn1r-jsonnet-0.20.0.drv building /gnu/store/d5pndfws378w22c7580fm4w517hfrn1r-jsonnet-0.20.0.drv... 63% ▕███████████████████████████████████████████████████████████████████████████████████████████████████████████████████▉ ▏builder for `/gnu/store/d5pndfws378w22c7580fm4w517hfrn1r-jsonnet-0.20.0.drv' failed with exit code 1 build of /gnu/store/d5pndfws378w22c7580fm4w517hfrn1r-jsonnet-0.20.0.drv failed View build log at '/var/log/guix/drvs/d5/pndfws378w22c7580fm4w517hfrn1r-jsonnet-0.20.0.drv.gz'. guix shell: error: build of `/gnu/store/d5pndfws378w22c7580fm4w517hfrn1r-jsonnet-0.20.0.drv' failed > > *How do I test building/installing this change locally?* > Here what I tried so far: > > 1. Standing at the root of the `guix` repository, build with: > > guix build -L . jsonnet > > This failed: > > ``` > guix build: warning: failed to load '(build-aux build-self)': > > > no code for module (build-aux build-self) > > > ./build-aux/build-self.scm:19:0: warning: module name (build-self) does > not match file name 'build-aux/build-self.scm' > > hint: File `./build-aux/build-self.scm' should probably start with: > > > > > > (define-module (build-aux build-self)) > > > > > > guix build: All 92 channel news entries are valid. > > > guix build: warning: failed to load '(build-aux check-channel-news)': > > > no code for module (build-aux check-channel-news) > > > hint: File `./build-aux/check-channel-news.scm' should probably start > with: > > > > > (define-module (build-aux check-channel-news)) > > > > [snip] > > > guix build: warning: failed to load '(build-aux compile-all)': > ``` > > 2. Followed the contributing guide [1], I created a shell instead: I believe this is the preferred way. > > guix shell -C -D guix git help2man strace > ./bootstrap > ./configure --localstatedir=/var I would recommend to use ./configure --localstatedir=/var --sysconfdir=/etc as described in the latest version of the manual: https://guix.gnu.org/manual/devel/en/html_node/Building-from-Git.html (notice the /devel/ in the path). Your version is from 1.4.0 version of the manual and it has some limitations. > > This generated `pre-inst-env`, but `make` step failed with: > > ``` > MAKEINFO doc/guix.de.info > contributing.de.texi:1659: @menu reference to nonexistent node > `Configuring Git' > contributing.de.texi:1660: @menu reference to nonexistent node `Sending > a Patch Series' > make[2]: *** [Makefile:5003: doc/guix.de.info] Error 1 > ``` Yes, this happens when you try to build guix source using too old guix version. So try to run `guix pull' first and then attempt to compile it again. It should succeed. > > So I was blocked to progress further :( > After that the pre-inst-env should work. > > [1] https://guix.gnu.org/manual/en/guix.html#Contributing > > -- > Hiep > > W. -- There are only two hard things in Computer Science: cache invalidation, naming things and off-by-one errors. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to bump a package version locally? 2023-10-18 19:00 ` wolf @ 2023-10-19 16:47 ` Hiep Pham 2023-10-19 23:39 ` Tomas Volf 0 siblings, 1 reply; 6+ messages in thread From: Hiep Pham @ 2023-10-19 16:47 UTC (permalink / raw) To: help-guix On 10/18/23 21:00, wolf wrote: > On 2023-10-18 18:24:48 +0000, Hiep Pham wrote: >> Hi, >> >> I want to bump `jsonnet` version from 0.17.0 to 0.20.0 from the master >> branch of the `guix` repository. I edited the version in >> `gnu/packages/cpp.scm`: >> >> (define-public jsonnet >> (package >> (name "jsonnet") >> (version "0.20.0") >> [snip] >> )) > [trim] >> >> 2. Followed the contributing guide [1], I created a shell instead: > > I believe this is the preferred way. > >> >> guix shell -C -D guix git help2man strace >> ./bootstrap >> ./configure --localstatedir=/var > > I would recommend to use > > ./configure --localstatedir=/var --sysconfdir=/etc > > as described in the latest version of the manual: > > https://guix.gnu.org/manual/devel/en/html_node/Building-from-Git.html > > (notice the /devel/ in the path). Your version is from 1.4.0 version of the > manual and it has some limitations. Okay, so I followed exactly this, and ... >> >> This generated `pre-inst-env`, but `make` step failed with: >> >> ``` >> MAKEINFO doc/guix.de.info >> contributing.de.texi:1659: @menu reference to nonexistent node >> `Configuring Git' >> contributing.de.texi:1660: @menu reference to nonexistent node `Sending >> a Patch Series' >> make[2]: *** [Makefile:5003: doc/guix.de.info] Error 1 >> ``` > > Yes, this happens when you try to build guix source using too old guix version. > So try to run `guix pull' first and then attempt to compile it again. It should > succeed. I ran `guix pull` but no luck for me. I still met the same error when I was running `make`: ``` contributing.de.texi:1659: @menu reference to nonexistent node `Configuring Git' contributing.de.texi:1660: @menu reference to nonexistent node `Sending a Patch Series' ``` My `guix describe` (on my Fedora machine): ``` guix c065da0 repository URL: https://git.savannah.gnu.org/git/guix.git branch: master commit: c065da01ff956d3c2bdfc45a33d910e509a211d9 ``` c065da01ff956d3c2bdfc45a33d910e509a211d9 is the latest commit on Oct 19, 2023. And my `which guix` is: /home/[username]/.config/guix/current/bin/guix >> >> So I was blocked to progress further :( >> > > After that the pre-inst-env should work. > >> >> [1] https://guix.gnu.org/manual/en/guix.html#Contributing >> >> -- >> Hiep >> >> > > W. > -- Hiep ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to bump a package version locally? 2023-10-19 16:47 ` Hiep Pham @ 2023-10-19 23:39 ` Tomas Volf 2023-10-21 19:20 ` Hiep Pham 0 siblings, 1 reply; 6+ messages in thread From: Tomas Volf @ 2023-10-19 23:39 UTC (permalink / raw) To: Hiep Pham; +Cc: help-guix [-- Attachment #1: Type: text/plain, Size: 3448 bytes --] On 2023-10-19 16:47:13 +0000, Hiep Pham wrote: > On 10/18/23 21:00, wolf wrote: > > On 2023-10-18 18:24:48 +0000, Hiep Pham wrote: > >> Hi, > >> > >> I want to bump `jsonnet` version from 0.17.0 to 0.20.0 from the master > >> branch of the `guix` repository. I edited the version in > >> `gnu/packages/cpp.scm`: > >> > >> (define-public jsonnet > >> (package > >> (name "jsonnet") > >> (version "0.20.0") > >> [snip] > >> )) > > [trim] > >> > >> 2. Followed the contributing guide [1], I created a shell instead: > > > > I believe this is the preferred way. > > > >> > >> guix shell -C -D guix git help2man strace > >> ./bootstrap > >> ./configure --localstatedir=/var > > > > I would recommend to use > > > > ./configure --localstatedir=/var --sysconfdir=/etc > > > > as described in the latest version of the manual: > > > > https://guix.gnu.org/manual/devel/en/html_node/Building-from-Git.html > > > > (notice the /devel/ in the path). Your version is from 1.4.0 version of the > > manual and it has some limitations. > > Okay, so I followed exactly this, and ... > > >> > >> This generated `pre-inst-env`, but `make` step failed with: > >> > >> ``` > >> MAKEINFO doc/guix.de.info > >> contributing.de.texi:1659: @menu reference to nonexistent node > >> `Configuring Git' > >> contributing.de.texi:1660: @menu reference to nonexistent node `Sending > >> a Patch Series' > >> make[2]: *** [Makefile:5003: doc/guix.de.info] Error 1 > >> ``` > > > > Yes, this happens when you try to build guix source using too old guix version. > > So try to run `guix pull' first and then attempt to compile it again. It should > > succeed. > > > I ran `guix pull` but no luck for me. I still met the same error when I > was running `make`: What version of makeinfo is present? For me: $ guix shell -D guix -- makeinfo --version texi2any (GNU texinfo) 6.8 > > ``` > contributing.de.texi:1659: @menu reference to nonexistent node > `Configuring Git' > contributing.de.texi:1660: @menu reference to nonexistent node `Sending > a Patch Series' > ``` > > My `guix describe` (on my Fedora machine): > > ``` > guix c065da0 > repository URL: https://git.savannah.gnu.org/git/guix.git > branch: master > commit: c065da01ff956d3c2bdfc45a33d910e509a211d9 > ``` > > c065da01ff956d3c2bdfc45a33d910e509a211d9 is the latest commit on Oct 19, > 2023. > > And my `which guix` is: > > /home/[username]/.config/guix/current/bin/guix I have to admit, I am unsure what the problem exactly is. Unless someone else comes with a better idea, what you could try: 1. Clean up the git worktree (I use `git clean -xffd') 2. Do the whole process step-by-step again 3. Send here the full output (commands executed and their output); also include both guix describe output and git commit of the guix repository you are on Maybe there will be more ideas based on that. Sorry I cannot be of more use. > > >> > >> So I was blocked to progress further :( > >> > > > > After that the pre-inst-env should work. > > > >> > >> [1] https://guix.gnu.org/manual/en/guix.html#Contributing > >> > >> -- > >> Hiep > >> > >> > > > > W. > > > > -- > Hiep > > > W. -- There are only two hard things in Computer Science: cache invalidation, naming things and off-by-one errors. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to bump a package version locally? 2023-10-19 23:39 ` Tomas Volf @ 2023-10-21 19:20 ` Hiep Pham 0 siblings, 0 replies; 6+ messages in thread From: Hiep Pham @ 2023-10-21 19:20 UTC (permalink / raw) To: help-guix On 10/20/23 01:39, Tomas Volf wrote: > On 2023-10-19 16:47:13 +0000, Hiep Pham wrote: >> On 10/18/23 21:00, wolf wrote: >>> On 2023-10-18 18:24:48 +0000, Hiep Pham wrote: >>>> Hi, >>>> >>>> I want to bump `jsonnet` version from 0.17.0 to 0.20.0 from the master >>>> branch of the `guix` repository. I edited the version in >>>> `gnu/packages/cpp.scm`: >>>> >>>> (define-public jsonnet >>>> (package >>>> (name "jsonnet") >>>> (version "0.20.0") >>>> [snip] >>>> )) >>> [trim] >>>> >>>> 2. Followed the contributing guide [1], I created a shell instead: >>> >>> I believe this is the preferred way. >>> >>>> >>>> guix shell -C -D guix git help2man strace >>>> ./bootstrap >>>> ./configure --localstatedir=/var >>> >>> I would recommend to use >>> >>> ./configure --localstatedir=/var --sysconfdir=/etc >>> >>> as described in the latest version of the manual: >>> >>> https://guix.gnu.org/manual/devel/en/html_node/Building-from-Git.html >>> >>> (notice the /devel/ in the path). Your version is from 1.4.0 version of the >>> manual and it has some limitations. >> >> Okay, so I followed exactly this, and ... >> >>>> >>>> This generated `pre-inst-env`, but `make` step failed with: >>>> >>>> ``` >>>> MAKEINFO doc/guix.de.info >>>> contributing.de.texi:1659: @menu reference to nonexistent node >>>> `Configuring Git' >>>> contributing.de.texi:1660: @menu reference to nonexistent node `Sending >>>> a Patch Series' >>>> make[2]: *** [Makefile:5003: doc/guix.de.info] Error 1 >>>> ``` >>> >>> Yes, this happens when you try to build guix source using too old guix version. >>> So try to run `guix pull' first and then attempt to compile it again. It should >>> succeed. >> >> >> I ran `guix pull` but no luck for me. I still met the same error when I >> was running `make`: > > What version of makeinfo is present? For me: > > $ guix shell -D guix -- makeinfo --version > texi2any (GNU texinfo) 6.8 > > >> >> ``` >> contributing.de.texi:1659: @menu reference to nonexistent node >> `Configuring Git' >> contributing.de.texi:1660: @menu reference to nonexistent node `Sending >> a Patch Series' >> ``` >> >> My `guix describe` (on my Fedora machine): >> >> ``` >> guix c065da0 >> repository URL: https://git.savannah.gnu.org/git/guix.git >> branch: master >> commit: c065da01ff956d3c2bdfc45a33d910e509a211d9 >> ``` >> >> c065da01ff956d3c2bdfc45a33d910e509a211d9 is the latest commit on Oct 19, >> 2023. >> >> And my `which guix` is: >> >> /home/[username]/.config/guix/current/bin/guix > > I have to admit, I am unsure what the problem exactly is. Unless someone else > comes with a better idea, what you could try: > > 1. Clean up the git worktree (I use `git clean -xffd') > 2. Do the whole process step-by-step again I ran `git clean -xffd`, and started anew in a container. guix shell --container --network --nesting --development guix help2man \ git strace font-ghostscript fontconfig guile-gnutls Things now work!! ./bootstrap ./configure --localstatedir=/var --sysconfdir=/etc make make check I now can build `jsonnet` with a new version (0.17.0 -> 0.20.0): /pre-inst-env guix build jsonnet Of course, the build failed, since *there should be more work than just bumping the version*. But this is a good start for me to start contributing to the master tree. Long way to go, though. Developing in a foreign distro (Fedora in my case) was difficult. Luckily, I discovered `--container`, `--network` and most importantly, `--nesting` so that Guix _inside_ the container can interact with the build daemon that runs _outside_ the container. Anyway, thanks a lot for your help! -- Hiep ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to bump a package version locally? 2023-10-18 18:24 How to bump a package version locally? Hiep Pham 2023-10-18 19:00 ` wolf @ 2023-10-20 13:15 ` Simon Tournier 1 sibling, 0 replies; 6+ messages in thread From: Simon Tournier @ 2023-10-20 13:15 UTC (permalink / raw) To: Hiep Pham, help-guix Hi, On Wed, 18 Oct 2023 at 18:24, Hiep Pham <hiepph9@proton.me> wrote: > I want to bump `jsonnet` version from 0.17.0 to 0.20.0 from the master > branch of the `guix` repository. I edited the version in > `gnu/packages/cpp.scm`: > > (define-public jsonnet > (package > (name "jsonnet") > (version "0.20.0") > [snip] > )) > > *How do I test building/installing this change locally?* > Here what I tried so far: > > 1. Standing at the root of the `guix` repository, build with: > > guix build -L . jsonnet > > This failed: What is the content of the folder ’.’? I guess the command above “guix build -L .” is run from the Guix checkout, right? If yes, the failure is expected. Here, you are loading too much and conflicting definitions. > 2. Followed the contributing guide [1], I created a shell instead: > > guix shell -C -D guix git help2man strace > ./bootstrap > ./configure --localstatedir=/var > > This generated `pre-inst-env`, but `make` step failed with: > > ``` > MAKEINFO doc/guix.de.info > contributing.de.texi:1659: @menu reference to nonexistent node > `Configuring Git' > contributing.de.texi:1660: @menu reference to nonexistent node `Sending > a Patch Series' > make[2]: *** [Makefile:5003: doc/guix.de.info] Error 1 > ``` Before running “guix shell”, what is your revision of Guix? What is the output of “guix describe”? Well, I recommend to run first “guix pull”. Then, if the error still happens, maybe try “make distclean” before running “./bootstrap”, “./configure” and “make”. Hope that helps, simon ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2023-10-21 19:20 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2023-10-18 18:24 How to bump a package version locally? Hiep Pham 2023-10-18 19:00 ` wolf 2023-10-19 16:47 ` Hiep Pham 2023-10-19 23:39 ` Tomas Volf 2023-10-21 19:20 ` Hiep Pham 2023-10-20 13:15 ` Simon Tournier
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/guix.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.