* bug#46165: No media present @ 2021-01-29 0:29 Pablo Ferreira 2021-01-29 23:20 ` Leo Famulari 0 siblings, 1 reply; 6+ messages in thread From: Pablo Ferreira @ 2021-01-29 0:29 UTC (permalink / raw) To: 46165 [-- Attachment #1.1: Type: text/plain, Size: 537 bytes --] Hey there! I just upgrade my guix system to kernel 5.10.11, using guix pull and sudo guix system reconfigure /etc/config.scm. When I reboot the system, it say "no media present", and go to bios setup. When I change from uefi to legacy, the system show what you can see in the picture. I think my cpu board is gone, nothing about Guix System. But I need to be sure. Is there any clue of test? I had a pen drive guix system 1.1.0 and I can access the drive no problem. But I can't boot the system. Obs: OMG I'm fat. 😱 [-- Attachment #1.2: Type: text/html, Size: 748 bytes --] [-- Attachment #2: IMG_20210128_155731.jpg --] [-- Type: image/jpeg, Size: 1775878 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#46165: No media present 2021-01-29 0:29 bug#46165: No media present Pablo Ferreira @ 2021-01-29 23:20 ` Leo Famulari 2021-01-30 0:02 ` Pablo Ferreira 0 siblings, 1 reply; 6+ messages in thread From: Leo Famulari @ 2021-01-29 23:20 UTC (permalink / raw) To: Pablo Ferreira; +Cc: 46165 On Thu, Jan 28, 2021 at 09:29:54PM -0300, Pablo Ferreira wrote: > Hey there! > > I just upgrade my guix system to kernel 5.10.11, using guix pull and sudo > guix system reconfigure /etc/config.scm. When I reboot the system, it say > "no media present", and go to bios setup. > > When I change from uefi to legacy, the system show what you can see in the > picture. > > I think my cpu board is gone, nothing about Guix System. But I need to be > sure. Is there any clue of test? I had a pen drive guix system 1.1.0 and I > can access the drive no problem. But I can't boot the system. > > Obs: OMG I'm fat. 😱 Can you share your config.scm? ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#46165: No media present 2021-01-29 23:20 ` Leo Famulari @ 2021-01-30 0:02 ` Pablo Ferreira 2021-01-30 9:17 ` Maxime Devos 0 siblings, 1 reply; 6+ messages in thread From: Pablo Ferreira @ 2021-01-30 0:02 UTC (permalink / raw) To: Leo Famulari; +Cc: 46165 [-- Attachment #1: Type: text/plain, Size: 1016 bytes --] No, I can't. Not now. I can't boot the system, only use android. I have to boot with my pen drive with Trisquel 8. But I'm not sure if it is. The upgrade do it well. If somethink goes wrong, the reconfigure do not even run. Em sex, 29 de jan de 2021 20:20, Leo Famulari <leo@famulari.name> escreveu: > On Thu, Jan 28, 2021 at 09:29:54PM -0300, Pablo Ferreira wrote: > > Hey there! > > > > I just upgrade my guix system to kernel 5.10.11, using guix pull and sudo > > guix system reconfigure /etc/config.scm. When I reboot the system, it say > > "no media present", and go to bios setup. > > > > When I change from uefi to legacy, the system show what you can see in > the > > picture. > > > > I think my cpu board is gone, nothing about Guix System. But I need to be > > sure. Is there any clue of test? I had a pen drive guix system 1.1.0 and > I > > can access the drive no problem. But I can't boot the system. > > > > Obs: OMG I'm fat. 😱 > > Can you share your config.scm? > [-- Attachment #2: Type: text/html, Size: 1460 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#46165: No media present 2021-01-30 0:02 ` Pablo Ferreira @ 2021-01-30 9:17 ` Maxime Devos 2021-02-01 13:57 ` Pablo Ferreira 0 siblings, 1 reply; 6+ messages in thread From: Maxime Devos @ 2021-01-30 9:17 UTC (permalink / raw) To: Pablo Ferreira; +Cc: 46165 [-- Attachment #1: Type: text/plain, Size: 1177 bytes --] On Fri, 2021-01-29 at 21:02 -0300, Pablo Ferreira wrote: > No, I can't. > > Not now. I can't boot the system, only use android. I have to boot with my pen drive with Trisquel 8. I'm presuming a setup like this: * Computer, with following hardware: + Hard disk, with broken Guix System+GRUB installation. + USB ports, in which a USB drive with a functioning Trisquel is installed + Keyboard, screen, etc. Would it be possible to boot Trisquel on the computer (via the pendrive), and on the live system mount the relevant filesystems of the hard disk. (E.g. using gnome-disks, which has a nice interface.) Here's some speculative troubleshooting: > > > When I change from uefi to legacy, the system show what you can see in the > > > picture. Legacy == BIOS and UEFI == that other boot system, right? The GRUB variants for these are the ‘grub’ package and the ‘grub-efi’ package I think (see 10.13 Bootloader Configuration). The bootloader variant and the booting system probably need to match. Maxime -- Maxime Devos <maximedevos@telenet.be> PGP Key: C1F3 3EE2 0C52 8FDB 7DD7 011F 49E3 EE22 1917 25EE Freenode handle: mdevos [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 260 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#46165: No media present 2021-01-30 9:17 ` Maxime Devos @ 2021-02-01 13:57 ` Pablo Ferreira 2021-02-02 11:53 ` Maxime Devos 0 siblings, 1 reply; 6+ messages in thread From: Pablo Ferreira @ 2021-02-01 13:57 UTC (permalink / raw) To: 46165 [-- Attachment #1: Type: text/plain, Size: 1926 bytes --] I friend Are you saying that the upgrade of the guix did broke the boot system? But they show not message. How do I reinstall the boot using the pendrive of Guix System Installation? Can I boot from pendrive then install the grub? I think I need to think like a Guix user because guix deamon control many think. I need to warning the GNU community that the grup.pdf has no instruction about how to boot a HDD from a pendrive manually. The Trisquel and Guix System pendrive show not option to HDD boot. I think this option exist with a normal situation. Thanks for the feedback. Em sáb, 30 de jan de 2021 06:17, Maxime Devos <maximedevos@telenet.be> escreveu: > On Fri, 2021-01-29 at 21:02 -0300, Pablo Ferreira wrote: > > No, I can't. > > > > Not now. I can't boot the system, only use android. I have to boot with > my pen drive with Trisquel 8. > > I'm presuming a setup like this: > > * Computer, with following hardware: > + Hard disk, with broken Guix System+GRUB installation. > + USB ports, in which a USB drive with a functioning Trisquel is > installed > + Keyboard, screen, etc. > > Would it be possible to boot Trisquel on the computer (via the pendrive), > and on the live system mount the relevant filesystems of the hard disk. > (E.g. using gnome-disks, which has a nice interface.) > > Here's some speculative troubleshooting: > > > > > When I change from uefi to legacy, the system show what you can see > in the > > > > picture. > Legacy == BIOS and UEFI == that other boot system, right? > The GRUB variants for these are the ‘grub’ package and the ‘grub-efi’ > package I think (see 10.13 Bootloader Configuration). The bootloader > variant and the booting system probably need to match. > > Maxime > -- > Maxime Devos <maximedevos@telenet.be> > PGP Key: C1F3 3EE2 0C52 8FDB 7DD7 011F 49E3 EE22 1917 25EE > Freenode handle: mdevos > [-- Attachment #2: Type: text/html, Size: 2585 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* bug#46165: No media present 2021-02-01 13:57 ` Pablo Ferreira @ 2021-02-02 11:53 ` Maxime Devos 0 siblings, 0 replies; 6+ messages in thread From: Maxime Devos @ 2021-02-02 11:53 UTC (permalink / raw) To: Pablo Ferreira, 46165 [-- Attachment #1: Type: text/plain, Size: 2875 bytes --] On Mon, 2021-02-01 at 10:57 -0300, Pablo Ferreira wrote: > I friend > > Are you saying that the upgrade of the guix did broke the boot system? Perhaps it was an upgrade of guix, perhaps it was a change in the boot configuration of the BIOS or UEFI (idk what the exact naming is), perhaps there is a hardware problem ... I'm just guessing. > But they show not message. What is ‘they’ here? GRUB (from the Trisquel pendrive, or from the Guix System installation, or from the Guix System installation pendrive)? The output of the last ‘guix system reconfigure’? The computer's boot firmware? > How do I reinstall the boot using the pendrive > of Guix System Installation? Can I boot from pendrive then install the grub? > I think I need to think like a Guix user because guix deamon control many think. I don't know what's going on with your system, so maybe the following won't actually fix anything: if you have back-ups of everything important, you could try to install the *whole* of Guix System again with the installation image. Though ideally reinstalling everything shouldn't be necessary, it can still be very effective. I don't see how the guix daemon would interfere. About just reinstalling GRUB bootloader + GRUB menu entries: that *should* theoretically be possible, but I don't know how. > I need to warning the GNU community that the grup.pdf has no instruction about > how to boot a HDD from a pendrive manually. I presume you meant grub.pdf (the PDF version of GRUB's manual) here. I believed I found some instructions on how to do this on the Web somewhere, but I can't find the document anymore )-:. Is it really necessary to boot from a pendrive, only to continue booting via a HDD, instead of booting the HDD directory? My (potentially wrong) guess, is that the BIOS boot configuration is set incorrectly. It depends on the specific computer model, but usually the settings can be tweaked like this: * Press some special keyboard configuration when powering on the computer (usually includes keys like control, alt, and function keys) * Some menu pops up * Verify whether ‘boot from hard disk’ or something like that appears in the boot order. Check whether ‘secure boot’ is disabled. If there is some kind of boot mode option (UEFI, Legacy, maybe some variants), make sure the right one for your operating system's installations are selected. If you believe the manual needs instructions on this, you should raise that issue at the appropriate grub mailing list. > Thanks for the feedback. If I understand correctly, you were able to boot a Trisquel system from a pendrive on the computer. Can you mount the root filesystem of the Guix installation somewhere (e.g. at /mnt) and copy the configuration of guix? (E.g. using gnome-disks) Maxime. [-- Attachment #2: This is a digitally signed message part --] [-- Type: application/pgp-signature, Size: 260 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-02-02 11:54 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-01-29 0:29 bug#46165: No media present Pablo Ferreira 2021-01-29 23:20 ` Leo Famulari 2021-01-30 0:02 ` Pablo Ferreira 2021-01-30 9:17 ` Maxime Devos 2021-02-01 13:57 ` Pablo Ferreira 2021-02-02 11:53 ` Maxime Devos
Code repositories for project(s) associated with this external index https://git.savannah.gnu.org/cgit/guix.git This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.