all messages for Guix-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* help: screen tearing in guix
@ 2021-10-22  2:31 dikasetyaprayogi--- via
  2021-10-22  6:16 ` Daniel Meißner
  0 siblings, 1 reply; 12+ messages in thread
From: dikasetyaprayogi--- via @ 2021-10-22  2:31 UTC (permalink / raw)
  To: help-guix

 hello fresh guixsd user here, i had a problem with screen tearing.

usually in my other parabola gnu linux machine i just make intel anti tearing conf in /etc/X11/xorg.conf.d/20-intel.conf and the problem gone.

when i do this in guix looks there is no effect, any way how to integrate this to guixsd? thanks.

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-22  2:31 help: screen tearing in guix dikasetyaprayogi--- via
@ 2021-10-22  6:16 ` Daniel Meißner
  2021-10-22 10:54   ` Julien Lepiller
  0 siblings, 1 reply; 12+ messages in thread
From: Daniel Meißner @ 2021-10-22  6:16 UTC (permalink / raw)
  To: dikasetyaprayogi; +Cc: help-guix

Hi dikasetyaprayogi,

> hello fresh guixsd user here, i had a problem with screen tearing.
>
> usually in my other parabola gnu linux machine i just make intel anti
> tearing conf in /etc/X11/xorg.conf.d/20-intel.conf and the problem
> gone.
>
> when i do this in guix looks there is no effect, any way how to
> integrate this to guixsd? thanks.

The system configuration of Guix works a little differently from
manipulating the config files directly.  Instead, the whole system
configuration is done inside of an operating-system record in a Scheme
file (see [1] for more info).  You can add your Xorg configuration to
the xorg-configuration record field of your display manager (see [2])
and then run `guix system reconfigure /path/to/your/config.scm'.  If you
have installed Guix via its graphical installer you should find your
system configuration at `/etc/config.scm'.

Best
Daniel

1: https://guix.gnu.org/de/manual/devel/en/html_node/Using-the-Configuration-System.html
2: https://guix.gnu.org/de/manual/devel/en/html_node/X-Window.html#X-Window


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-22  6:16 ` Daniel Meißner
@ 2021-10-22 10:54   ` Julien Lepiller
  2021-10-22 14:33     ` dikasetyaprayogi--- via
  0 siblings, 1 reply; 12+ messages in thread
From: Julien Lepiller @ 2021-10-22 10:54 UTC (permalink / raw)
  To: help-guix, Daniel Meißner, dikasetyaprayogi

Hi,

I'd be interested in the content of that file. Where does it come from, can you share it? As a bonus, I would be able to use it and help you if I find out how to configure my system to use it :)

Le 22 octobre 2021 02:16:48 GMT-04:00, "Daniel Meißner" <daniel.meissner-i4k@ruhr-uni-bochum.de> a écrit :
>Hi dikasetyaprayogi,
>
>> hello fresh guixsd user here, i had a problem with screen tearing.
>>
>> usually in my other parabola gnu linux machine i just make intel anti
>> tearing conf in /etc/X11/xorg.conf.d/20-intel.conf and the problem
>> gone.
>>
>> when i do this in guix looks there is no effect, any way how to
>> integrate this to guixsd? thanks.
>
>The system configuration of Guix works a little differently from
>manipulating the config files directly.  Instead, the whole system
>configuration is done inside of an operating-system record in a Scheme
>file (see [1] for more info).  You can add your Xorg configuration to
>the xorg-configuration record field of your display manager (see [2])
>and then run `guix system reconfigure /path/to/your/config.scm'.  If you
>have installed Guix via its graphical installer you should find your
>system configuration at `/etc/config.scm'.
>
>Best
>Daniel
>
>1: https://guix.gnu.org/de/manual/devel/en/html_node/Using-the-Configuration-System.html
>2: https://guix.gnu.org/de/manual/devel/en/html_node/X-Window.html#X-Window
>

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-22 10:54   ` Julien Lepiller
@ 2021-10-22 14:33     ` dikasetyaprayogi--- via
  2021-10-23 20:50       ` Ekaitz Zarraga
  0 siblings, 1 reply; 12+ messages in thread
From: dikasetyaprayogi--- via @ 2021-10-22 14:33 UTC (permalink / raw)
  To: Help Guix

Date: Oct 22, 2021, 17:54
From: julien@lepiller.eu
To: help-guix@gnu.org, daniel.meissner-i4k@ruhr-uni-bochum.de, dikasetyaprayogi@tutamail.com
Subject: Re: help: screen tearing in guix


> Hi,
>
> I'd be interested in the content of that file. Where does it come from, can you share it? As a bonus, I would be able to use it and help you if I find out how to configure my system to use it :)
>
Hi, thank you all for the tips.

@julien im usualy used intel anti tearing conf from archwiki:

https://wiki.archlinux.org/title/intel_graphics#Troubleshooting

im still new into scheming language, must read the manual novel throughfuly first :D

temporarily solved the screen tearing problem by subtitute picom into lxde, a bit extra memory tough.



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-22 14:33     ` dikasetyaprayogi--- via
@ 2021-10-23 20:50       ` Ekaitz Zarraga
  2021-10-23 22:18         ` dikasetyaprayogi--- via
  2021-10-24 18:47         ` André A. Gomes
  0 siblings, 2 replies; 12+ messages in thread
From: Ekaitz Zarraga @ 2021-10-23 20:50 UTC (permalink / raw)
  To: dikasetyaprayogi; +Cc: Help Guix

I think this is what you are looking for:
https://gitlab.com/ekaitz-zarraga/guix-configuration/-/blob/master/desktop.scm#L115
HTH!!

ElenQ Technology
Ethical Innovation



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-23 20:50       ` Ekaitz Zarraga
@ 2021-10-23 22:18         ` dikasetyaprayogi--- via
  2021-10-24 10:48           ` Ekaitz Zarraga
  2021-10-24 18:47         ` André A. Gomes
  1 sibling, 1 reply; 12+ messages in thread
From: dikasetyaprayogi--- via @ 2021-10-23 22:18 UTC (permalink / raw)
  To: Help Guix


Date: Oct 24, 2021, 03:50
From: ekaitz@elenq.tech
To: dikasetyaprayogi@tutamail.com
Cc: help-guix@gnu.org
Subject: Re: help: screen tearing in guix


> I think this is what you are looking for:
> https://gitlab.com/ekaitz-zarraga/guix-configuration/-/blob/master/desktop.scm#L115
> HTH!!
>
> ElenQ Technology
> Ethical Innovation
>
Thank you very much @ekaitz, problem solved.

for the future maybe a screen tearing section in guix wiki would be a great help and quick access for starter :)

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-23 22:18         ` dikasetyaprayogi--- via
@ 2021-10-24 10:48           ` Ekaitz Zarraga
  2021-10-24 10:54             ` Pascal Lorenz
  0 siblings, 1 reply; 12+ messages in thread
From: Ekaitz Zarraga @ 2021-10-24 10:48 UTC (permalink / raw)
  To: dikasetyaprayogi; +Cc: Help Guix


> Thank you very much @ekaitz, problem solved.
>
> for the future maybe a screen tearing section in guix wiki would be a great help and quick access for starter :)

It's a shame Guix doesn't have a wiki :P
I don't know if Guix's documentation is designed to include this kind of specific things, but we could try to add it.

The change is basically the same that comes in the ArchWiki but it must be set through the Guix configuration system that fills xorg.conf.

:)


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-24 10:48           ` Ekaitz Zarraga
@ 2021-10-24 10:54             ` Pascal Lorenz
  2021-10-24 11:00               ` Ekaitz Zarraga
  0 siblings, 1 reply; 12+ messages in thread
From: Pascal Lorenz @ 2021-10-24 10:54 UTC (permalink / raw)
  To: Ekaitz Zarraga; +Cc: Help Guix


> On 24. Oct 2021, at 12:48, Ekaitz Zarraga <ekaitz@elenq.tech> wrote:
> 
> 
>> Thank you very much @ekaitz, problem solved.
>> 
>> for the future maybe a screen tearing section in guix wiki would be a great help and quick access for starter :)
> 
> It's a shame Guix doesn't have a wiki :P
> I don't know if Guix's documentation is designed to include this kind of specific things, but we could try to add it.

I think that's what the cookbook is for.


> The change is basically the same that comes in the ArchWiki but it must be set through the Guix configuration system that fills xorg.conf.
> 
> :)
> 



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-24 10:54             ` Pascal Lorenz
@ 2021-10-24 11:00               ` Ekaitz Zarraga
  2021-10-24 18:55                 ` André A. Gomes
  0 siblings, 1 reply; 12+ messages in thread
From: Ekaitz Zarraga @ 2021-10-24 11:00 UTC (permalink / raw)
  To: Pascal Lorenz; +Cc: Help Guix


> > I don't know if Guix's documentation is designed to include this kind of specific things, but we could try to add it.
>
> I think that's what the cookbook is for.
>

Thanks! Any suggestion on where to include it or how?


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-23 20:50       ` Ekaitz Zarraga
  2021-10-23 22:18         ` dikasetyaprayogi--- via
@ 2021-10-24 18:47         ` André A. Gomes
  2021-10-27 10:03           ` Ekaitz Zarraga
  1 sibling, 1 reply; 12+ messages in thread
From: André A. Gomes @ 2021-10-24 18:47 UTC (permalink / raw)
  To: Ekaitz Zarraga; +Cc: Help Guix

Ekaitz Zarraga <ekaitz@elenq.tech> writes:

> I think this is what you are looking for:
> https://gitlab.com/ekaitz-zarraga/guix-configuration/-/blob/master/desktop.scm#L115
> HTH!!

Hi Ekaitz,

I've noticed that on my laptop's built-in screen there's some kind of
weird "delay" going on.  For instance, the cursor lags behind after
hitting Space.  On my external monitor, there are no issues at all.  If
that matters, the built-in screen native resolution is almost 4K.  I've
tried to play with the ModeLine settings in the past, but I wasn't able
to solve it.

I'm wondering if this "TearFree" option sounds like it could solve my
issue.  Regardless, I'll give it a try.


I also took a look at your config, and I noticed the last section
relative to ModemManager.

I've been playing with DIY keyboards (as you know) and I'm just curious
why exactly ModemManager interferes with USB devices.

For now I've solved the issue by adding the following udev rule:

--8<---------------cut here---------------start------------->8---
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205",
TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
--8<---------------cut here---------------end--------------->8---

My understand is that MM from "ID_MM_DEVICE_IGNORE" stands for
ModemManager.  I'd like to get a deeper understanding of what's going
on.  If you can share some pointers, I'd appreciate it.

Thank you.


--
André A. Gomes
"Free Thought, Free World"


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-24 11:00               ` Ekaitz Zarraga
@ 2021-10-24 18:55                 ` André A. Gomes
  0 siblings, 0 replies; 12+ messages in thread
From: André A. Gomes @ 2021-10-24 18:55 UTC (permalink / raw)
  To: Ekaitz Zarraga; +Cc: Help Guix

Ekaitz Zarraga <ekaitz@elenq.tech> writes:

>> > I don't know if Guix's documentation is designed to include this kind of specific things, but we could try to add it.
>>
>> I think that's what the cookbook is for.
>>
>
> Thanks! Any suggestion on where to include it or how?

I'd say that such information doesn't belong to any Guix manual.  It's
too specific.

However, (info "(guix) X Window"), specifically
`set-xorg-configuration`, could perhaps make it more explicit that users
should dig into xorg man pages.


-- 
André A. Gomes
"Free Thought, Free World"


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: help: screen tearing in guix
  2021-10-24 18:47         ` André A. Gomes
@ 2021-10-27 10:03           ` Ekaitz Zarraga
  0 siblings, 0 replies; 12+ messages in thread
From: Ekaitz Zarraga @ 2021-10-27 10:03 UTC (permalink / raw)
  To: André A. Gomes; +Cc: Help Guix

Hi Andre

> I've noticed that on my laptop's built-in screen there's some kind of
> weird "delay" going on.  For instance, the cursor lags behind after
> hitting Space.  On my external monitor, there are no issues at all.  If
> that matters, the built-in screen native resolution is almost 4K.  I've
> tried to play with the ModeLine settings in the past, but I wasn't able
> to solve it.
>
> I'm wondering if this "TearFree" option sounds like it could solve my
> issue.  Regardless, I'll give it a try.

In my laptop it didn't resolve tearing totally but it reduced it (I think,
I made the change recently and I was trained to ignore it :S)


> I also took a look at your config, and I noticed the last section
> relative to ModemManager.
>
> I've been playing with DIY keyboards (as you know) and I'm just curious
> why exactly ModemManager interferes with USB devices.
>
> For now I've solved the issue by adding the following udev rule:
>
> --8<---------------cut here---------------start------------->8---
> SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9205",
> TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1"
> --8<---------------cut here---------------end--------------->8---
>
> My understand is that MM from "ID_MM_DEVICE_IGNORE" stands for
> ModemManager.  I'd like to get a deeper understanding of what's going
> on.  If you can share some pointers, I'd appreciate it.

The modem manager basically tries to know if anything you connected
is a modem so it sends AT commands to the serial devices right when
they are connected. That may interfere with your work.

The udev rule you added id more than enough I think. I'm a radical guy
so I just removed the modem manager service :)



^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2021-10-27 10:03 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-10-22  2:31 help: screen tearing in guix dikasetyaprayogi--- via
2021-10-22  6:16 ` Daniel Meißner
2021-10-22 10:54   ` Julien Lepiller
2021-10-22 14:33     ` dikasetyaprayogi--- via
2021-10-23 20:50       ` Ekaitz Zarraga
2021-10-23 22:18         ` dikasetyaprayogi--- via
2021-10-24 10:48           ` Ekaitz Zarraga
2021-10-24 10:54             ` Pascal Lorenz
2021-10-24 11:00               ` Ekaitz Zarraga
2021-10-24 18:55                 ` André A. Gomes
2021-10-24 18:47         ` André A. Gomes
2021-10-27 10:03           ` Ekaitz Zarraga

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/guix.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.