[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

Hello Guixers,

This adds avr as a platform to GNU Guix allowing to cross-compile
packages to it.

For the impatient, with this patch series one can build the provided
unity package with this invocation:

./pre-inst-env guix build unity --target=avr

It uses the AVR Libc as the default libc and fully builds a
cross-compiler using the AVR Libc instead of building them separately
like it's done currently.  This could allow to use other of front-ends of
GCC in the future if possible, however, Fortran and Objective-C
front-ends don't build right now for AVR, haven't tested any other
front-ends.

This also adds the cross-toolchain module for instantiating
cross-toolchain packages, this is to avoid each platform defining a
module like avr to instantiate a toolchain, this helps in avoiding
circular dependencies as cross-toolchain should depend only on
cross-base and that'd be it.

I think could've added cross-toolchains there for MinGW though, but I
don't have a need for it but allows others to do so.  Perhaps it could
be a requirement that to add a platform one needs to add a
cross-toolchain package.

I enabled multilib support for AVR as most embedded platforms will need
it, which makes me think, perhaps should the platform record contain a
`mutlilib?' field?

Information about individual patches:

On [PATCH 05/23] I didn't find a better way of deleting the
--disable-multilib flag from GCC configure flags, if anyone has a better
idea let me know.

The [PATCH 01/23] and [PATCH 02/23] are optional but there
might be some platforms defined in the future that don't have
a proper libc and it still should be fine to use these I think.

The [PATCH 21/23] fixes a bug in the meson-configuration module
and can be applied independently.

Feel free to cherry pick the interesting/trivial patches.

PS:

I CC'ed the embedded team and Maxim Cournoyer as I saw his current work
on QMK firmwares and could be of interest to him.

Jean-Pierre De Jesus DIAZ (23):
  gnu: cross-libc: Return #f if no libc available.
  guix: gnu: Handle platforms without libc.
  gnu: Add avr platform.
  guix: utils: Add target-avr?.
  gnu: cross-gcc: Enable multilib for avr.
  gnu: microscheme: Move to avr-xyz.
  gnu: Add AVR phases to cross-gcc-build-phases.
  gnu: avr-libc: Convert to procedure.
  gnu: Add make-cross-gcc-toolchain.
  gnu: Add binutils-cross-avr.
  gnu: avr-binutils: Deprecate package.
  gnu: Remove various AVR packages.
  gnu: cross-libc: Add AVR Libc case.
  gnu: cross-gcc-arguments: Handle AVR target.
  guix: meson-configuration: Fix boolean assigment.
  gnu: cross-gcc-search-paths: Handle AVR target.
  gnu: cross-gcc: Handle inputs for AVR.
  gnu: Add avr-libc.
  gnu: Add gcc-cross-avr-toolchain.
  gnu: Add avr-toolchain.
  guix: meson-build-system: Support AVR.
  guix: meson-build-system: Disable PIC for AVR.
  gnu: Add unity.

 Makefile.am                        |   1 +
 doc/guix.texi                      |   6 +
 gnu/build/cross-toolchain.scm      |  41 +++++-
 gnu/local.mk                       |   1 +
 gnu/packages/avr-xyz.scm           |  41 ++++++
 gnu/packages/avr.scm               | 152 +++-----------------
 gnu/packages/check.scm             |  41 ++++++
 gnu/packages/cross-base.scm        | 213 +++++++++++++++++++----------
 gnu/packages/cross-toolchain.scm   |  88 ++++++++++++
 guix/build-system/gnu.scm          |  12 +-
 guix/build-system/meson.scm        |  14 +-
 guix/build/meson-configuration.scm |   4 +-
 guix/platforms/avr.scm             |  29 ++++
 guix/utils.scm                     |   4 +
 14 files changed, 421 insertions(+), 226 deletions(-)
 create mode 100644 gnu/packages/cross-toolchain.scm
 create mode 100644 guix/platforms/avr.scm

-- 
2.34.1

[bug#66263] [PATCH 01/23] gnu: cross-libc: Return #f if no libc available.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-libc): Return #f if platform does
  not have a libc available.
---
 gnu/packages/cross-base.scm | 138 +++++++++++++++++++-----------------
 1 file changed, 71 insertions(+), 67 deletions(-)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index 14cb365099..f55765f1b0 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -9,6 +9,7 @@
 ;;; Copyright © 2020 Mathieu Othacehe <m.othacehe@gmail.com>
 ;;; Copyright © 2022 Maxim Cournoyer <maxim.cournoyer@gmail.com>
 ;;; Copyright © 2023 Josselin Poiret <dev@jpoiret.xyz>
+;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -611,73 +612,76 @@ (define* (cross-libc* target
                       (xheaders (cross-kernel-headers target)))
   "Return LIBC cross-built for TARGET, a GNU triplet. Use XGCC and XBINUTILS
 and the cross tool chain."
-  (if (target-mingw? target)
-      (let ((machine (substring target 0 (string-index target #\-))))
-        (make-mingw-w64 machine
-                        #:xgcc xgcc
-                        #:xbinutils xbinutils))
-      (package
-        (inherit libc)
-        (name (string-append "glibc-cross-" target))
-        (arguments
-         (substitute-keyword-arguments
-             `( ;; Disable stripping (see above.)
-               #:strip-binaries? #f
-
-               ;; This package is used as a target input, but it should not have
-               ;; the usual cross-compilation inputs since that would include
-               ;; itself.
-               #:implicit-cross-inputs? #f
-
-               ;; We need SRFI 26.
-               #:modules ((guix build gnu-build-system)
-                          (guix build utils)
-                          (srfi srfi-26))
-
-               ,@(package-arguments libc))
-           ((#:configure-flags flags)
-            `(cons ,(string-append "--host=" target)
-                   ,(if (target-hurd? target)
-                        `(append (list "--disable-werror"
-                                       ,@%glibc/hurd-configure-flags)
-                                 ,flags)
-                        flags)))
-           ((#:phases phases)
-            `(modify-phases ,phases
-               (add-before 'configure 'set-cross-kernel-headers-path
-                 (lambda* (#:key inputs #:allow-other-keys)
-                   (let* ((kernel (assoc-ref inputs "kernel-headers"))
-                          (cpath (string-append kernel "/include")))
-                     (for-each (cut setenv <> cpath)
-                               ',%gcc-cross-include-paths)
-                     (setenv "CROSS_LIBRARY_PATH"
-                             (string-append kernel "/lib")) ; for Hurd's libihash
-                     #t)))
-               ,@(if (target-hurd? target)
-                     '((add-after 'install 'augment-libc.so
-                         (lambda* (#:key outputs #:allow-other-keys)
-                           (let* ((out (assoc-ref outputs "out")))
-                             (substitute* (string-append out "/lib/libc.so")
-                               (("/[^ ]+/lib/libc.so.0.3")
-                                (string-append out "/lib/libc.so.0.3"
-                                               " libmachuser.so libhurduser.so"))))
-                           #t)))
-                     '())))))
-
-        ;; Shadow the native "kernel-headers" because glibc's recipe expects the
-        ;; "kernel-headers" input to point to the right thing.
-        (propagated-inputs `(("kernel-headers" ,xheaders)))
-
-        (native-inputs `(("cross-gcc" ,xgcc)
-                         ("cross-binutils" ,xbinutils)
-                         ,@(if (target-hurd? target)
-                               `(("cross-mig"
-                                  ,(cross-mig target
-                                              #:xgcc xgcc
-                                              #:xbinutils xbinutils)))
-                               '())
-                         ,@(package-inputs libc) ;FIXME: static-bash
-                         ,@(package-native-inputs libc))))))
+  (match target
+   ((? target-mingw?)
+    (let ((machine (substring target 0 (string-index target #\-))))
+      (make-mingw-w64 machine
+                      #:xgcc xgcc
+                      #:xbinutils xbinutils)))
+   ((or (? target-linux?) (? target-hurd?))
+    (package
+      (inherit libc)
+      (name (string-append "glibc-cross-" target))
+      (arguments
+       (substitute-keyword-arguments
+           `( ;; Disable stripping (see above.)
+             #:strip-binaries? #f
+
+             ;; This package is used as a target input, but it should not have
+             ;; the usual cross-compilation inputs since that would include
+             ;; itself.
+             #:implicit-cross-inputs? #f
+
+             ;; We need SRFI 26.
+             #:modules ((guix build gnu-build-system)
+                        (guix build utils)
+                        (srfi srfi-26))
+
+             ,@(package-arguments libc))
+         ((#:configure-flags flags)
+          `(cons ,(string-append "--host=" target)
+                 ,(if (target-hurd? target)
+                      `(append (list "--disable-werror"
+                                     ,@%glibc/hurd-configure-flags)
+                               ,flags)
+                      flags)))
+         ((#:phases phases)
+          `(modify-phases ,phases
+             (add-before 'configure 'set-cross-kernel-headers-path
+               (lambda* (#:key inputs #:allow-other-keys)
+                 (let* ((kernel (assoc-ref inputs "kernel-headers"))
+                        (cpath (string-append kernel "/include")))
+                   (for-each (cut setenv <> cpath)
+                             ',%gcc-cross-include-paths)
+                   (setenv "CROSS_LIBRARY_PATH"
+                           (string-append kernel "/lib")) ; for Hurd's libihash
+                   #t)))
+             ,@(if (target-hurd? target)
+                   '((add-after 'install 'augment-libc.so
+                       (lambda* (#:key outputs #:allow-other-keys)
+                         (let* ((out (assoc-ref outputs "out")))
+                           (substitute* (string-append out "/lib/libc.so")
+                             (("/[^ ]+/lib/libc.so.0.3")
+                              (string-append out "/lib/libc.so.0.3"
+                                             " libmachuser.so libhurduser.so"))))
+                         #t)))
+                   '())))))
+
+      ;; Shadow the native "kernel-headers" because glibc's recipe expects the
+      ;; "kernel-headers" input to point to the right thing.
+      (propagated-inputs `(("kernel-headers" ,xheaders)))
+
+      (native-inputs `(("cross-gcc" ,xgcc)
+                       ("cross-binutils" ,xbinutils)
+                       ,@(if (target-hurd? target)
+                             `(("cross-mig"
+                                ,(cross-mig target
+                                            #:xgcc xgcc
+                                            #:xbinutils xbinutils)))
+                             '())
+                       ,@(package-inputs libc) ;FIXME: static-bash
+                       ,@(package-native-inputs libc)))))
+   (else #f)))
 
 \f
 ;;; Concrete cross tool chains are instantiated like this:
-- 
2.34.1

[bug#66263] [PATCH 02/23] guix: gnu: Handle platforms without libc.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/build-system/gnu.scm (standard-cross-packages): Do not add
  cross-libc as an input if the system doesn't support a libc.
---
 guix/build-system/gnu.scm | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/guix/build-system/gnu.scm b/guix/build-system/gnu.scm
index c1aa187c42..03a742f8b9 100644
--- a/guix/build-system/gnu.scm
+++ b/guix/build-system/gnu.scm
@@ -460,11 +460,15 @@ (define standard-cross-packages
            `(("cross-gcc" ,(gcc target
                                 #:xbinutils (binutils target)
                                 #:libc libc))
-             ("cross-libc" ,libc)
 
-             ;; MinGW's libc doesn't have a "static" output.
-             ,@(if (member "static" (package-outputs libc))
-                   `(("cross-libc:static" ,libc "static"))
+             ;; Some targets don't have a libc.
+             ,@(if libc
+                   `(("cross-libc" ,libc)
+
+                     ;; MinGW's libc doesn't have a "static" output.
+                     ,@(if (member "static" (package-outputs libc))
+                           `(("cross-libc:static" ,libc "static"))
+                           '()))
                    '()))))))))
 
 (define* (gnu-cross-build name
-- 
2.34.1

[bug#66263] [PATCH 03/23] gnu: Add avr platform.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* Makefile.am (MODULES): Add avr platform module.

* doc/guix.texi: Add documentation for avr platform.

* guix/platforms/avr.scm (avr): New variable.
---
 Makefile.am            |  1 +
 doc/guix.texi          |  6 ++++++
 guix/platforms/avr.scm | 29 +++++++++++++++++++++++++++++
 3 files changed, 36 insertions(+)
 create mode 100644 guix/platforms/avr.scm

diff --git a/Makefile.am b/Makefile.am
index 8924974e8a..c11a1c538d 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -136,6 +136,7 @@ MODULES =					\
   guix/ipfs.scm					\
   guix/platform.scm                             \
   guix/platforms/arm.scm                        \
+  guix/platforms/avr.scm                        \
   guix/platforms/mips.scm                       \
   guix/platforms/powerpc.scm                    \
   guix/platforms/riscv.scm                      \
diff --git a/doc/guix.texi b/doc/guix.texi
index 46591b2f64..70cde9c53c 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -16665,6 +16665,7 @@ The available targets are:
 
    - aarch64-linux-gnu
    - arm-linux-gnueabihf
+   - avr
    - i586-pc-gnu
    - i686-linux-gnu
    - i686-w64-mingw32
@@ -45332,6 +45333,11 @@ Platform targeting x86 CPU running GNU/Hurd (also referred to as
 ``GNU'').
 @end defvar
 
+@defvar avr
+Platform targeting AVR CPUs without an operating system, with run-time support
+from AVR Libc.
+@end defvar
+
 @node System Images
 @chapter Creating System Images
 
diff --git a/guix/platforms/avr.scm b/guix/platforms/avr.scm
new file mode 100644
index 0000000000..b6ca6e4a10
--- /dev/null
+++ b/guix/platforms/avr.scm
@@ -0,0 +1,29 @@
+;;; GNU Guix --- Functional package management for GNU
+;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
+;;;
+;;; This file is part of GNU Guix.
+;;;
+;;; GNU Guix is free software; you can redistribute it and/or modify it
+;;; under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3 of the License, or (at
+;;; your option) any later version.
+;;;
+;;; GNU Guix is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
+
+(define-module (guix platforms avr)
+  #:use-module (guix platform)
+  #:use-module (guix records)
+  #:export (avr))
+
+(define avr
+  (platform
+   (target "avr")
+   (system #f)
+   (glibc-dynamic-linker #f)))
+
-- 
2.34.1

[bug#66263] [PATCH 04/23] guix: utils: Add target-avr?.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/utils.scm (target-avr?): New procedure.
---
 guix/utils.scm | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/guix/utils.scm b/guix/utils.scm
index e9af33bdeb..1724b53149 100644
--- a/guix/utils.scm
+++ b/guix/utils.scm
@@ -98,6 +98,7 @@ (define-module (guix utils)
             target-arm32?
             target-aarch64?
             target-arm?
+            target-avr?
             target-ppc32?
             target-ppc64le?
             target-powerpc?
@@ -722,6 +723,9 @@ (define* (target-arm? #:optional (target (or (%current-target-system)
                                              (%current-system))))
   (or (target-arm32? target) (target-aarch64? target)))
 
+(define* (target-avr? #:optional (target (%current-target-system)))
+  (string-prefix? "avr" target))
+
 (define* (target-ppc32? #:optional (target (or (%current-target-system)
                                                (%current-system))))
   (string-prefix? "powerpc-" target))
-- 
2.34.1

[bug#66263] [PATCH 05/23] gnu: cross-gcc: Enable multilib for avr.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc-arguments)
  [target-avr?]: Remove --disable-mutlilib and add --enable-multilib.
---
 gnu/packages/avr.scm        |  4 +---
 gnu/packages/cross-base.scm | 17 +++++++++++++----
 2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index b9bee5e624..e976203b89 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -75,9 +75,7 @@ (define avr-gcc
                   ;; several scripts inside this script, each with a #!/bin/sh
                   ;; that needs patching.
                   (substitute* "gcc/genmultilib"
-                    (("#!/bin/sh") (string-append "#!" (which "sh"))))))))
-         ((#:configure-flags flags)
-          #~(delete "--disable-multilib" #$flags))))
+                    (("#!/bin/sh") (string-append "#!" (which "sh"))))))))))
       (native-search-paths
        (list (search-path-specification
               (variable "CROSS_C_INCLUDE_PATH")
diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index f55765f1b0..ec7ca2186d 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -197,12 +197,21 @@ (define (cross-gcc-arguments target xgcc libc)
                                 #~((string-append "--with-toolexeclibdir="
                                                   (assoc-ref %outputs "lib")
                                                   "/" #$target "/lib"))
+                                #~())
+
+                         #$@(if (target-avr? target)
+                                #~("--enable-multilib")
+                                #~())
+
                                 #~()))
 
-                   #$(if libc
-                         flags
-                         #~(remove (cut string-match "--enable-languages.*" <>)
-                                   #$flags))))
+                   (remove
+                     (lambda (flag)
+                       (or (and (string-match "--enable-languages.*" flag)
+                                #$libc)
+                           (and (string-match "--disable-multilib" flag)
+                                #$(target-avr? target))))
+                     #$flags)))
         ((#:make-flags flags)
          (if libc
              #~(let ((libc (assoc-ref %build-inputs "libc")))
-- 
2.34.1

[bug#66263] [PATCH 06/23] gnu: microscheme: Move to avr-xyz.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/avr.scm (microscheme): Remove from file.

* gnu/packages/avr-xyz.scm (microscheme): New variable.
---
 gnu/packages/avr-xyz.scm | 41 +++++++++++++++++++++++++++++++++++++++
 gnu/packages/avr.scm     | 42 +---------------------------------------
 2 files changed, 42 insertions(+), 41 deletions(-)

diff --git a/gnu/packages/avr-xyz.scm b/gnu/packages/avr-xyz.scm
index a05157ede7..771753b5e4 100644
--- a/gnu/packages/avr-xyz.scm
+++ b/gnu/packages/avr-xyz.scm
@@ -28,14 +28,55 @@ (define-module (gnu packages avr-xyz)
   #:use-module (gnu packages autotools)
   #:use-module (gnu packages base)
   #:use-module (gnu packages bash)
+  #:use-module (gnu packages check)
+  #:use-module (gnu packages compression)
   #:use-module (gnu packages avr)
   #:use-module (gnu packages elf)
   #:use-module (gnu packages gl)
+  #:use-module (gnu packages llvm)
   #:use-module (gnu packages pkg-config)
   #:use-module (gnu packages ncurses)
   #:use-module (gnu packages version-control)
+  #:use-module (gnu packages vim)
   #:use-module (gnu packages ruby))
 
+(define-public microscheme
+  (package
+    (name "microscheme")
+    (version "0.9.4")
+    (source
+     (origin
+       (method git-fetch)
+       (uri (git-reference
+             (url "https://github.com/ryansuchocki/microscheme")
+             (commit (string-append "v" version))))
+       (sha256
+        (base32 "1bflwirpcd58bngbs6hgjfwxl894ni2gpdd4pj10pm2mjhyj5dgw"))
+       (file-name (git-file-name name version))))
+    (build-system gnu-build-system)
+    (arguments
+     `(#:parallel-build? #f             ; fails to build otherwise
+       #:tests? #f                      ; no tests
+       #:phases
+       (modify-phases %standard-phases
+         (delete 'configure))
+       #:make-flags
+       (list (string-append "PREFIX=" (assoc-ref %outputs "out")))))
+    (native-inputs
+     (list clang cppcheck unzip xxd))
+    (home-page "https://github.com/ryansuchocki/microscheme/")
+    (synopsis "Scheme subset for Atmel microcontrollers")
+    (description
+     "Microscheme, or @code{(ms)} for short, is a functional programming
+language for the Arduino, and for Atmel 8-bit AVR microcontrollers in general.
+Microscheme is a subset of Scheme, in the sense that every valid @code{(ms)}
+program is also a valid Scheme program (with the exception of Arduino
+hardware-specific primitives).  The @code{(ms)} compiler performs function
+inlining, and features an aggressive tree-shaker, eliminating unused top-level
+definitions.  Microscheme has a robust @dfn{Foreign Function Interface} (FFI)
+meaning that C code may be invoked directly from (ms) programs.")
+    (license license:expat)))
+
 (define-public simavr
   (package
     (name "simavr")
diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index e976203b89..ccce686010 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -32,12 +32,9 @@ (define-module (gnu packages avr)
   #:use-module (guix build-system gnu)
   #:use-module (guix build-system trivial)
   #:use-module (gnu packages check)
-  #:use-module (gnu packages compression)
   #:use-module (gnu packages cross-base)
   #:use-module (gnu packages flashing-tools)
-  #:use-module (gnu packages gcc)
-  #:use-module (gnu packages llvm)
-  #:use-module (gnu packages vim))
+  #:use-module (gnu packages gcc))
 
 (define-public avr-binutils
   (package
@@ -142,40 +139,3 @@ (define-public avr-toolchain
 C++.")
     (home-page (package-home-page avr-libc))
     (license (package-license avr-gcc))))
-
-(define-public microscheme
-  (package
-    (name "microscheme")
-    (version "0.9.4")
-    (source
-     (origin
-       (method git-fetch)
-       (uri (git-reference
-             (url "https://github.com/ryansuchocki/microscheme")
-             (commit (string-append "v" version))))
-       (sha256
-        (base32 "1bflwirpcd58bngbs6hgjfwxl894ni2gpdd4pj10pm2mjhyj5dgw"))
-       (file-name (git-file-name name version))))
-    (build-system gnu-build-system)
-    (arguments
-     `(#:parallel-build? #f             ; fails to build otherwise
-       #:tests? #f                      ; no tests
-       #:phases
-       (modify-phases %standard-phases
-         (delete 'configure))
-       #:make-flags
-       (list (string-append "PREFIX=" (assoc-ref %outputs "out")))))
-    (native-inputs
-     (list clang cppcheck unzip xxd))
-    (home-page "https://github.com/ryansuchocki/microscheme/")
-    (synopsis "Scheme subset for Atmel microcontrollers")
-    (description
-     "Microscheme, or @code{(ms)} for short, is a functional programming
-language for the Arduino, and for Atmel 8-bit AVR microcontrollers in general.
-Microscheme is a subset of Scheme, in the sense that every valid @code{(ms)}
-program is also a valid Scheme program (with the exception of Arduino
-hardware-specific primitives).  The @code{(ms)} compiler performs function
-inlining, and features an aggressive tree-shaker, eliminating unused top-level
-definitions.  Microscheme has a robust @dfn{Foreign Function Interface} (FFI)
-meaning that C code may be invoked directly from (ms) programs.")
-    (license license:expat)))
-- 
2.34.1

[bug#66263] [PATCH 07/23] gnu: Add AVR phases to cross-gcc-build-phases.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/build/cross-toolchain.scm (set-cross-path/avr): New procedure.

* gnu/build/cross-toolchain.scm (cross-gcc-build-phases): Add case for
  AVR target.
---
 gnu/build/cross-toolchain.scm | 41 +++++++++++++++++++++++++++++------
 1 file changed, 34 insertions(+), 7 deletions(-)

diff --git a/gnu/build/cross-toolchain.scm b/gnu/build/cross-toolchain.scm
index 9746be3e50..8de62be593 100644
--- a/gnu/build/cross-toolchain.scm
+++ b/gnu/build/cross-toolchain.scm
@@ -97,6 +97,31 @@ (define (cross? x)
      ;; We're building the sans-libc cross-compiler, so nothing to do.
      #t)))
 
+(define* (set-cross-path/avr #:key inputs #:allow-other-keys)
+  (match (assoc-ref inputs "libc")
+    ((? string? libc)
+     (define (cross? x)
+       ;; Return #t if X is a cross-libc.
+       (string-prefix? libc x))
+
+     (let ((cpath (string-append libc "/avr/include")))
+       (for-each (cut setenv <> cpath)
+                 %gcc-cross-include-paths))
+
+     (setenv "CROSS_LIBRARY_PATH"
+             (string-append libc "/avr/lib"))
+
+     (for-each (lambda (var)
+                   (and=> (getenv var)
+                          (lambda (value)
+                            (let* ((path (search-path-as-string->list value))
+                                   (native-path (list->search-path-as-string
+                                                 (remove cross? path) ":")))
+                              (setenv var native-path)))))
+                 (cons "LIBRARY_PATH" %gcc-include-paths)))
+    ;; AVR sans-libc cross-compiler.
+    (else #t)))
+
 (define* (set-cross-path/mingw #:key inputs target #:allow-other-keys)
   "Add the cross MinGW headers to CROSS_C_*_INCLUDE_PATH, and remove them from
 C_*INCLUDE_PATH."
@@ -174,13 +199,15 @@ (define* (cross-gcc-build-phases target
 a target triplet."
   (modify-phases phases
     (add-before 'configure 'set-cross-path
-      ;; This mingw32 target checking logic should match that of target-mingw?
-      ;; in (guix utils), but (guix utils) is too large too copy over to the
-      ;; build side entirely and for now we have no way to select variables to
-      ;; copy over. See (gnu packages cross-base) for more details.
-      (if (string-suffix? "-mingw32" target)
-          (cut set-cross-path/mingw #:target target <...>)
-          set-cross-path))
+      (cond
+        ;; This mingw32 target checking logic should match that of target-mingw?
+        ;; in (guix utils), but (guix utils) is too large too copy over to the
+        ;; build side entirely and for now we have no way to select variables to
+        ;; copy over. See (gnu packages cross-base) for more details.
+        ((string-suffix? "-mingw32" target)
+         (cut set-cross-path/mingw #:target target <...>))
+        ((string-prefix? "avr" target) set-cross-path/avr)
+        (else set-cross-path)))
     (add-after 'install 'make-cross-binutils-visible
       (cut make-cross-binutils-visible #:target target <...>))
     (replace 'install install-strip)))
-- 
2.34.1

[bug#66263] [PATCH 08/23] gnu: avr-libc: Convert to procedure.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/avr.scm (make-avr-libc): New procedure.

* gnu/packages/avr.scm (avr-libc): Use make-avr-libc procedure.
---
 gnu/packages/avr.scm | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index ccce686010..df1523274b 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -34,7 +34,8 @@ (define-module (gnu packages avr)
   #:use-module (gnu packages check)
   #:use-module (gnu packages cross-base)
   #:use-module (gnu packages flashing-tools)
-  #:use-module (gnu packages gcc))
+  #:use-module (gnu packages gcc)
+  #:export (make-avr-libc))
 
 (define-public avr-binutils
   (package
@@ -93,7 +94,9 @@ (define avr-gcc
        `(("gcc" ,gcc)
          ,@(package-native-inputs xgcc))))))
 
-(define avr-libc
+(define* (make-avr-libc #:key
+                        (xbinutils (cross-binutils "avr"))
+                        (xgcc (cross-gcc "avr")))
   (package
     (name "avr-libc")
     (version "2.0.0")
@@ -106,10 +109,12 @@ (define avr-libc
                 "15svr2fx8j6prql2il2fc0ppwlv50rpmyckaxx38d3gxxv97zpdj"))))
     (build-system gnu-build-system)
     (arguments
-     '(#:out-of-source? #t
-       #:configure-flags '("--host=avr")))
-    (native-inputs `(("avr-binutils" ,avr-binutils)
-                     ("avr-gcc" ,avr-gcc)))
+     (list #:target "avr"
+
+           #:out-of-source? #t
+
+           #:implicit-cross-inputs? #f))
+    (native-inputs (list xbinutils xgcc))
     (home-page "https://www.nongnu.org/avr-libc/")
     (synopsis "The AVR C Library")
     (description
@@ -118,6 +123,8 @@ (define avr-libc
     (license
      (license:non-copyleft "http://www.nongnu.org/avr-libc/LICENSE.txt"))))
 
+(define avr-libc (make-avr-libc))
+
 (define-public avr-toolchain
   ;; avr-libc checks the compiler version and passes "--enable-device-lib" for avr-gcc > 5.1.0.
   ;; It wouldn't install the library for atmega32u4 etc if we didn't use the corret avr-gcc.
-- 
2.34.1

[bug#66263] [PATCH 09/23] gnu: Add make-cross-gcc-toolchain.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-toolchain.scm (make-cross-gcc-toolchain): New
  procedure.
---
 gnu/local.mk                     |  1 +
 gnu/packages/cross-toolchain.scm | 58 ++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)
 create mode 100644 gnu/packages/cross-toolchain.scm

diff --git a/gnu/local.mk b/gnu/local.mk
index bfa816d717..bdd3af5080 100644
--- a/gnu/local.mk
+++ b/gnu/local.mk
@@ -197,6 +197,7 @@ GNU_SYSTEM_MODULES =				\
   %D%/packages/crates-graphics.scm		\
   %D%/packages/crates-gtk.scm			\
   %D%/packages/cross-base.scm			\
+  %D%/packages/cross-toolchain.scm			\
   %D%/packages/crypto.scm			\
   %D%/packages/cryptsetup.scm			\
   %D%/packages/cups.scm				\
diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
new file mode 100644
index 0000000000..0062d043a0
--- /dev/null
+++ b/gnu/packages/cross-toolchain.scm
@@ -0,0 +1,58 @@
+;;; GNU Guix --- Functional package management for GNU
+;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
+;;;
+;;; This file is part of GNU Guix.
+;;;
+;;; GNU Guix is free software; you can redistribute it and/or modify it
+;;; under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3 of the License, or (at
+;;; your option) any later version.
+;;;
+;;; GNU Guix is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
+
+(define-module (gnu packages cross-toolchain)
+  #:use-module (gnu packages avr)
+  #:use-module (gnu packages cross-base)
+  #:use-module (guix build-system trivial)
+  #:use-module (guix packages)
+  #:use-module (srfi srfi-1)
+  #:export (make-cross-gcc-toolchain))
+
+(define* (make-cross-gcc-toolchain target
+                                   #:key
+                                   (libc (cross-libc target))
+                                   (xgcc (cross-gcc target #:libc libc))
+                                   (xbinutils (cross-binutils target)))
+  (package
+    (name (string-append (package-name xgcc) "-toolchain"))
+    (version (package-version xgcc))
+    (source #f)
+    (build-system trivial-build-system)
+    (arguments
+     '(#:modules ((guix build union))
+       #:builder (begin
+         (use-modules (ice-9 match)
+                      (guix build union))
+
+         (match %build-inputs
+           (((names . directory) ...)
+            (union-build (assoc-ref %outputs "out") directory))))))
+    (inputs (list xgcc xbinutils libc))
+    (native-search-paths (package-native-search-paths xgcc))
+    (search-paths (package-search-paths xgcc))
+    (properties (alist-delete 'hidden? (package-properties xgcc)))
+    (license (package-license xgcc))
+    (synopsis (string-append "Complete GCC tool chain for C/C++ development ("
+                             target ")"))
+    (description
+      "This package provides a complete GCC cross tool chain for C/C++
+development to be installed in user profiles.  This includes GCC, as well as
+libc (headers and binaries), and Binutils.  GCC is the GNU Compiler
+Collection.")
+    (home-page "https://gcc.gnu.org/")))
-- 
2.34.1

[bug#66263] [PATCH 10/23] gnu: Add binutils-cross-avr.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-toolchain.scm (binutils-cross-avr): New variable.
---
 gnu/packages/cross-toolchain.scm | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
index 0062d043a0..5617959851 100644
--- a/gnu/packages/cross-toolchain.scm
+++ b/gnu/packages/cross-toolchain.scm
@@ -56,3 +56,8 @@ (define* (make-cross-gcc-toolchain target
 libc (headers and binaries), and Binutils.  GCC is the GNU Compiler
 Collection.")
     (home-page "https://gcc.gnu.org/")))
+
+;;; Cross binutils:
+
+(define-public binutils-cross-avr
+  (cross-binutils "avr"))
-- 
2.34.1

[bug#66263] [PATCH 11/23] gnu: avr-binutils: Deprecate package.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/avr.scm (avr-binutils): Delete variable.

* gnu/packages/cross-toolchain.scm (avr-binutils): New deprecated variable.
---
 gnu/packages/avr.scm             | 5 -----
 gnu/packages/cross-toolchain.scm | 4 ++++
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index df1523274b..97873a8691 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -37,11 +37,6 @@ (define-module (gnu packages avr)
   #:use-module (gnu packages gcc)
   #:export (make-avr-libc))
 
-(define-public avr-binutils
-  (package
-    (inherit (cross-binutils "avr"))
-    (name "avr-binutils")))
-
 (define avr-gcc
   (let ((xgcc (cross-gcc "avr" #:xbinutils avr-binutils)))
     (package
diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
index 5617959851..77af6b862b 100644
--- a/gnu/packages/cross-toolchain.scm
+++ b/gnu/packages/cross-toolchain.scm
@@ -20,6 +20,7 @@ (define-module (gnu packages cross-toolchain)
   #:use-module (gnu packages avr)
   #:use-module (gnu packages cross-base)
   #:use-module (guix build-system trivial)
+  #:use-module (guix deprecation)
   #:use-module (guix packages)
   #:use-module (srfi srfi-1)
   #:export (make-cross-gcc-toolchain))
@@ -61,3 +62,6 @@ (define* (make-cross-gcc-toolchain target
 
 (define-public binutils-cross-avr
   (cross-binutils "avr"))
+
+(define-deprecated/public avr-binutils binutils-cross-avr
+  (deprecated-package "avr-binutils" binutils-cross-avr))
-- 
2.34.1

[bug#66263] [PATCH 12/23] gnu: Remove various AVR packages.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/avr.scm (avr-gcc): Remove variable.
  (avr-libc): Ditto.
  (avr-toolchain): Ditto.
---
 gnu/packages/avr.scm | 92 +++-----------------------------------------
 1 file changed, 6 insertions(+), 86 deletions(-)

diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index 97873a8691..e9b8e2b064 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -23,72 +23,16 @@
 ;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
 
 (define-module (gnu packages avr)
-  #:use-module ((guix licenses) #:prefix license:)
-  #:use-module (guix gexp)
-  #:use-module (guix utils)
+  #:use-module (gnu packages)
+  #:use-module (gnu packages cross-base)
+  #:use-module (guix build-system gnu)
   #:use-module (guix download)
-  #:use-module (guix git-download)
+  #:use-module (guix gexp)
+  #:use-module ((guix licenses) #:prefix license:)
   #:use-module (guix packages)
-  #:use-module (guix build-system gnu)
-  #:use-module (guix build-system trivial)
-  #:use-module (gnu packages check)
-  #:use-module (gnu packages cross-base)
-  #:use-module (gnu packages flashing-tools)
-  #:use-module (gnu packages gcc)
+  #:use-module (guix utils)
   #:export (make-avr-libc))
 
-(define avr-gcc
-  (let ((xgcc (cross-gcc "avr" #:xbinutils avr-binutils)))
-    (package
-      (inherit xgcc)
-      (name "avr-gcc")
-      (arguments
-       (substitute-keyword-arguments (package-arguments xgcc)
-         ((#:phases phases)
-          #~(modify-phases #$phases
-              (add-after 'set-paths 'augment-CPLUS_INCLUDE_PATH
-                (lambda* (#:key inputs #:allow-other-keys)
-                  (let ((gcc (assoc-ref inputs  "gcc")))
-                    ;; Remove the default compiler from CPLUS_INCLUDE_PATH to
-                    ;; prevent header conflict with the GCC from native-inputs.
-                    (setenv "CPLUS_INCLUDE_PATH"
-                            (string-join
-                             (delete (string-append gcc "/include/c++")
-                                     (string-split (getenv "CPLUS_INCLUDE_PATH")
-                                                   #\:))
-                             ":"))
-                    (format #t
-                            "environment variable `CPLUS_INCLUDE_PATH' changed to ~a~%"
-                            (getenv "CPLUS_INCLUDE_PATH")))))
-              ;; Without a working multilib build, the resulting GCC lacks
-              ;; support for nearly every AVR chip.
-              (add-after 'unpack 'fix-genmultilib
-                (lambda _
-                  ;; patch-shebang doesn't work here because there are actually
-                  ;; several scripts inside this script, each with a #!/bin/sh
-                  ;; that needs patching.
-                  (substitute* "gcc/genmultilib"
-                    (("#!/bin/sh") (string-append "#!" (which "sh"))))))))))
-      (native-search-paths
-       (list (search-path-specification
-              (variable "CROSS_C_INCLUDE_PATH")
-              (files '("avr/include")))
-             (search-path-specification
-              (variable "CROSS_CPLUS_INCLUDE_PATH")
-              (files '("avr/include")))
-             (search-path-specification
-              (variable "CROSS_OBJC_INCLUDE_PATH")
-              (files '("avr/include")))
-             (search-path-specification
-              (variable "CROSS_OBJCPLUS_INCLUDE_PATH")
-              (files '("avr/include")))
-             (search-path-specification
-              (variable "CROSS_LIBRARY_PATH")
-              (files '("avr/lib")))))
-      (native-inputs
-       `(("gcc" ,gcc)
-         ,@(package-native-inputs xgcc))))))
-
 (define* (make-avr-libc #:key
                         (xbinutils (cross-binutils "avr"))
                         (xgcc (cross-gcc "avr")))
@@ -117,27 +61,3 @@ (define* (make-avr-libc #:key
 for use with GCC on Atmel AVR microcontrollers.")
     (license
      (license:non-copyleft "http://www.nongnu.org/avr-libc/LICENSE.txt"))))
-
-(define avr-libc (make-avr-libc))
-
-(define-public avr-toolchain
-  ;; avr-libc checks the compiler version and passes "--enable-device-lib" for avr-gcc > 5.1.0.
-  ;; It wouldn't install the library for atmega32u4 etc if we didn't use the corret avr-gcc.
-  (package
-    (name "avr-toolchain")
-    (version (package-version avr-gcc))
-    (source #f)
-    (build-system trivial-build-system)
-    (arguments '(#:builder (begin (mkdir %output) #t)))
-    (propagated-inputs
-     `(("avrdude" ,avrdude)
-       ("binutils" ,avr-binutils)
-       ("gcc" ,avr-gcc)
-       ("libc" ,avr-libc)))
-    (synopsis "Complete GCC tool chain for AVR microcontroller development")
-    (description "This package provides a complete GCC tool chain for AVR
-microcontroller development.  This includes the GCC AVR cross compiler and
-avrdude for firmware flashing.  The supported programming languages are C and
-C++.")
-    (home-page (package-home-page avr-libc))
-    (license (package-license avr-gcc))))
-- 
2.34.1

[bug#66263] [PATCH 13/23] gnu: cross-libc: Add AVR Libc case.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-libc): Handle the AVR target case
  and return AVR Libc package.
---
 gnu/packages/cross-base.scm | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index ec7ca2186d..fc21e7c4fd 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -28,6 +28,7 @@
 
 (define-module (gnu packages cross-base)
   #:use-module (gnu packages)
+  #:use-module (gnu packages avr)
   #:use-module (gnu packages gcc)
   #:use-module (gnu packages base)
   #:use-module (gnu packages linux)
@@ -622,6 +623,8 @@ (define* (cross-libc* target
   "Return LIBC cross-built for TARGET, a GNU triplet. Use XGCC and XBINUTILS
 and the cross tool chain."
   (match target
+   ((? target-avr?)
+    (make-avr-libc #:xgcc xgcc #:xbinutils xbinutils))
    ((? target-mingw?)
     (let ((machine (substring target 0 (string-index target #\-))))
       (make-mingw-w64 machine
-- 
2.34.1

[bug#66263] [PATCH 14/23] gnu: cross-gcc-arguments: Handle AVR target.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc-arguments): Handle AVR target.
---
 gnu/packages/cross-base.scm | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index fc21e7c4fd..10d912b755 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -204,23 +204,38 @@ (define (cross-gcc-arguments target xgcc libc)
                                 #~("--enable-multilib")
                                 #~())
 
+                         #$@(if (and libc (target-avr? target))
+                                #~("--enable-languages=c,c++"
+                                   (string-append "--with-native-system-header-dir="
+                                                  #$libc "/avr/include" ))
                                 #~()))
 
                    (remove
                      (lambda (flag)
                        (or (and (string-match "--enable-languages.*" flag)
                                 #$libc)
+                           (and (string-match "--with-native-system-header-dir.*"
+                                              flag)
+                                #$libc
+                                #$(target-avr? target))
                            (and (string-match "--disable-multilib" flag)
                                 #$(target-avr? target))))
                      #$flags)))
         ((#:make-flags flags)
-         (if libc
-             #~(let ((libc (assoc-ref %build-inputs "libc")))
+         (cond
+           ((and (target-avr? target) libc)
+            #~(let ((libc (assoc-ref %build-inputs "libc")))
                 ;; FLAGS_FOR_TARGET are needed for the target libraries to receive
                 ;; the -Bxxx for the startfiles.
-                 (cons (string-append "FLAGS_FOR_TARGET=-B" libc "/lib")
-                       #$flags))
-             flags))
+                (cons (string-append "FLAGS_FOR_TARGET=-B" libc "/avr/lib")
+                      #$flags)))
+           (libc
+            #~(let ((libc (assoc-ref %build-inputs "libc")))
+                ;; FLAGS_FOR_TARGET are needed for the target libraries to receive
+                ;; the -Bxxx for the startfiles.
+                (cons (string-append "FLAGS_FOR_TARGET=-B" libc "/lib")
+                      #$flags)))
+           (else flags)))
         ((#:phases phases)
          #~(cross-gcc-build-phases #$target #$phases))))))
 
-- 
2.34.1

[bug#66263] [PATCH 15/23] guix: meson-configuration: Fix boolean assigment.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/build/meson-configuration.scm (write-assigment): Print true for
  #t and false for #f.  Previously it was inverting the values.
---
 guix/build/meson-configuration.scm | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/guix/build/meson-configuration.scm b/guix/build/meson-configuration.scm
index 1aac5f8f0a..5e194d4c2b 100644
--- a/guix/build/meson-configuration.scm
+++ b/guix/build/meson-configuration.scm
@@ -43,9 +43,9 @@ (define (write-assignment port key value)
      (format port "~a = '~a'~%" key value))
     ((? integer?)
      (format port "~a = ~a~%" key value))
-    (#f
-     (format port "~a = true~%" key))
     (#t
+     (format port "~a = true~%" key))
+    (#f
      (format port "~a = false~%" key))))
 
 (define* (write-assignments port alist)
-- 
2.34.1

[bug#66263] [PATCH 16/23] gnu: cross-gcc-search-paths: Handle AVR target.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc-search-paths): Handle AVR
  target case.
---
 gnu/packages/cross-base.scm | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index 10d912b755..ee90424076 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -267,6 +267,31 @@ (define (cross-gcc-snippet target)
         "-DTOOLDIR_BASE_PREFIX=\\\"../../../../\\\""))
      #t))
 
+(define (cross-gcc-search-paths target)
+  "Return GCC search paths needed for TARGET."
+  (cons (search-path-specification
+          (variable "CROSS_LIBRARY_PATH")
+          (files `("lib" "lib64"
+                   ,@(list (string-append target "/lib")
+                           (string-append target "/lib64")))))
+
+        (map (lambda (variable)
+               (search-path-specification
+                 (variable variable)
+
+                 ;; Add 'include/c++' here so that <cstdlib>'s
+                 ;; "#include_next <stdlib.h>" finds GCC's
+                 ;; <stdlib.h>, not libc's.
+                 (files (match variable
+                          ("CROSS_CPLUS_INCLUDE_PATH"
+                           `("include/c++" "include"
+                             ,@(list (string-append target "/include/c++")
+                                     (string-append target "/include"))))
+                          (_
+                           `("include"
+                             ,@(string-append target "/include")))))))
+             %gcc-cross-include-paths)))
+
 (define* (cross-gcc target
                     #:key
                     (xgcc %xgcc)
-- 
2.34.1

[bug#66263] [PATCH 17/23] gnu: cross-gcc: Handle inputs for AVR.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc) <inputs>: Handle inputs for
  AVR.
---
 gnu/packages/cross-base.scm | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index ee90424076..ef793557fc 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -366,6 +366,11 @@ (define* (cross-gcc target
                                   ,@(assoc-ref (%final-inputs)
                                                "libc:static"))))))
            (cond
+            ((target-avr? target)
+             (if libc
+                 `(,@inputs
+                   ("libc" ,libc))
+                 inputs))
             ((target-mingw? target)
              (if libc
                  `(,@inputs
-- 
2.34.1

[bug#66263] [PATCH 18/23] gnu: Add avr-libc.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-toolchain.scm (avr-libc): New variable.
---
 gnu/packages/cross-toolchain.scm | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
index 77af6b862b..929e665e50 100644
--- a/gnu/packages/cross-toolchain.scm
+++ b/gnu/packages/cross-toolchain.scm
@@ -65,3 +65,8 @@ (define-public binutils-cross-avr
 
 (define-deprecated/public avr-binutils binutils-cross-avr
   (deprecated-package "avr-binutils" binutils-cross-avr))
+
+;;; C standard libraries:
+
+(define-public avr-libc
+  (cross-libc "avr"))
-- 
2.34.1

[bug#66263] [PATCH 19/23] gnu: Add gcc-cross-avr-toolchain.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-toolchain.scm (gcc-cross-avr-toolchain): New
  variable.
---
 gnu/packages/cross-toolchain.scm | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
index 929e665e50..2ee039c7f6 100644
--- a/gnu/packages/cross-toolchain.scm
+++ b/gnu/packages/cross-toolchain.scm
@@ -70,3 +70,11 @@ (define-deprecated/public avr-binutils binutils-cross-avr
 
 (define-public avr-libc
   (cross-libc "avr"))
+
+;;; Cross toolchains:
+
+(define-public gcc-cross-avr-toolchain
+  (make-cross-gcc-toolchain "avr"
+                            #:libc avr-libc
+                            #:xgcc (cross-gcc "avr" #:libc avr-libc)
+                            #:xbinutils binutils-cross-avr))
-- 
2.34.1

[bug#66263] [PATCH 20/23] gnu: Add avr-toolchain.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-toolchain.scm (avr-toolchain): New variable.
---
 gnu/packages/cross-toolchain.scm | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
index 2ee039c7f6..0f1cd45b40 100644
--- a/gnu/packages/cross-toolchain.scm
+++ b/gnu/packages/cross-toolchain.scm
@@ -19,6 +19,7 @@
 (define-module (gnu packages cross-toolchain)
   #:use-module (gnu packages avr)
   #:use-module (gnu packages cross-base)
+  #:use-module (gnu packages flashing-tools)
   #:use-module (guix build-system trivial)
   #:use-module (guix deprecation)
   #:use-module (guix packages)
@@ -78,3 +79,10 @@ (define-public gcc-cross-avr-toolchain
                             #:libc avr-libc
                             #:xgcc (cross-gcc "avr" #:libc avr-libc)
                             #:xbinutils binutils-cross-avr))
+
+(define-deprecated/public avr-toolchain gcc-cross-avr-toolchain
+  (deprecated-package "avr-toolchain"
+                      (package/inherit gcc-cross-avr-toolchain
+                        (inputs
+                          (modify-inputs (package-inputs gcc-cross-avr-toolchain)
+                            (append avrdude))))))
-- 
2.34.1

[bug#66263] [PATCH 21/23] guix: meson-build-system: Support AVR.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/build-system/meson.scm (make-machine-alist)
  <system> [target-avr?]: Set to none.
  <cpu_family> [target-avr?]: Set to avr.
  <cpu> [target-avr?]: Set to avr.
---
 guix/build-system/meson.scm | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/guix/build-system/meson.scm b/guix/build-system/meson.scm
index 7c617bffb0..b894789fb8 100644
--- a/guix/build-system/meson.scm
+++ b/guix/build-system/meson.scm
@@ -49,11 +49,13 @@ (define (make-machine-alist triplet)
   `((system . ,(cond ((target-hurd? triplet) "gnu")
                      ((target-linux? triplet) "linux")
                      ((target-mingw? triplet) "windows")
+                     ((target-avr? triplet) "none")
                      (#t (error "meson: unknown operating system"))))
     (cpu_family . ,(cond ((target-x86-32? triplet) "x86")
                          ((target-x86-64? triplet) "x86_64")
                          ((target-arm32? triplet) "arm")
                          ((target-aarch64? triplet) "aarch64")
+                         ((target-avr? triplet) "avr")
                          ((target-mips64el? triplet) "mips64")
                          ((target-powerpc? triplet)
                           (if (target-64bit? triplet)
@@ -66,6 +68,7 @@ (define (make-machine-alist triplet)
                   ((target-x86-64? triplet) "x86_64")
                   ((target-aarch64? triplet) "armv8-a")
                   ((target-arm32? triplet) "armv7")
+                  ((target-avr? triplet) "avr")
                   ;; According to #mesonbuild on OFTC, there does not appear
                   ;; to be an official-ish list of CPU types recognised by
                   ;; Meson, the "cpu" field is not used by Meson itself and
-- 
2.34.1

[bug#66263] [PATCH 22/23] guix: meson-build-system: Disable PIC for AVR.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/build-system/meson.scm (make-built-in-options-alist): New
  variable.

* guix/build-system/meson.scm (make-cross-file): Add 'built-in options'
  section to cross file.
---
 guix/build-system/meson.scm | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/guix/build-system/meson.scm b/guix/build-system/meson.scm
index b894789fb8..92e47285d6 100644
--- a/guix/build-system/meson.scm
+++ b/guix/build-system/meson.scm
@@ -92,6 +92,13 @@ (define (make-binaries-alist triplet)
     (ld . ,(string-append triplet "-ld"))
     (strip . ,(string-append triplet "-strip"))))
 
+(define (make-built-in-options-alist triplet)
+  (if (target-avr? triplet)
+      `((b_pie . #f)
+        (b_staticpic . #f)
+        (default_library . "static"))
+       '()))
+
 (define (make-cross-file triplet)
   (computed-file "cross-file"
     (with-imported-modules '((guix build meson-configuration))
@@ -102,7 +109,9 @@ (define (make-cross-file triplet)
               (write-section-header port "host_machine")
               (write-assignments port '#$(make-machine-alist triplet))
               (write-section-header port "binaries")
-              (write-assignments port '#$(make-binaries-alist triplet))))))))
+              (write-assignments port '#$(make-binaries-alist triplet))
+              (write-section-header port "built-in options")
+              (write-assignments port '#$(make-built-in-options-alist triplet))))))))
 
 (define %meson-build-system-modules
   ;; Build-side modules imported by default.
-- 
2.34.1

[bug#66263] [PATCH 23/23] gnu: Add unity.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/check.scm (unity): New variable.
---
 gnu/packages/check.scm | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/gnu/packages/check.scm b/gnu/packages/check.scm
index 5af3b49280..db368663d4 100644
--- a/gnu/packages/check.scm
+++ b/gnu/packages/check.scm
@@ -87,6 +87,7 @@ (define-module (gnu packages check)
   #:use-module (gnu packages python-web)
   #:use-module (gnu packages python-xyz)
   #:use-module (gnu packages python-science)
+  #:use-module (gnu packages ruby)
   #:use-module (gnu packages texinfo)
   #:use-module (gnu packages time)
   #:use-module (gnu packages xml)
@@ -3170,6 +3171,46 @@ (define-public unittest-cpp
 portable to just about any platform.")
     (license license:expat)))
 
+(define-public unity
+  (let ((revision "0")
+        (commit "2775e1b05875cf45afce7153e36af76ddbfdba26"))
+    (package
+      (name "unity")
+      (version (git-version "2.5.4" revision commit))
+      (source (origin
+                (method git-fetch)
+                (uri (git-reference
+                       (url "https://github.com/ThrowTheSwitch/Unity")
+                       (commit commit)))
+                (file-name (git-file-name name version))
+                (sha256
+                 (base32
+                  "0y803ibjkqvj1fil0a0hzs7x0m98amm5ibwl8xxk3p8bj9wgdps1"))))
+      (build-system meson-build-system)
+      (arguments
+       (list #:configure-flags #~(list "-Dextension_fixture=true"
+                                       "-Dextension_memory=true"
+                                       "-Dsupport_double=true")
+             #:phases #~(modify-phases %standard-phases
+                          (replace 'check
+                            (lambda* (#:key tests? #:allow-other-keys)
+                              (when tests?
+                                (with-directory-excursion "../source/test"
+                                  (invoke "rake" "all"))))))))
+      (native-inputs
+        (append (list python)
+                (if (not (%current-target-system))
+                         (list ruby
+                               ruby-rake
+                               ruby-rspec
+                               ruby-rubocop)
+                         '())))
+      (home-page "http://throwtheswitch.org")
+      (synopsis "Unit testing framework for C")
+      (description "Unity is a lightweight unit testing framework for C.  It was
+designed to allow running tests on embedded devices and on a host computer.")
+      (license license:expat))))
+
 (define-public libfaketime
   (package
     (name "libfaketime")
-- 
2.34.1

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Jean-Pierre De Jesus Diaz via Guix-patches via]

> The [PATCH 21/23] fixes a bug in the meson-configuration module
> and can be applied independently.

Meant [PATCH 15/23], my mistake.

-- 
—
Jean-Pierre De Jesus DIAZ
Software Engineer
Foundation Devices

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Mathieu Othacehe]

Hello,

> The [PATCH 21/23] fixes a bug in the meson-configuration module
> and can be applied independently.

I applied this one. Now the rest of the series also seems fine to me.
Maxim, Efraim, Vagrant any thoughts?

Thanks,

Mathieu

[bug#66263] [PATCH 06/23] gnu: microscheme: Move to avr-xyz.

[Efraim Flashner]

[-- Attachment #1: Type: text/plain, Size: 5951 bytes --]

This missing the copyright headers associated with microscheme which
should be copied over also

On Fri, Sep 29, 2023 at 11:16:10AM +0200, Jean-Pierre De Jesus DIAZ wrote:
> * gnu/packages/avr.scm (microscheme): Remove from file.
> 
> * gnu/packages/avr-xyz.scm (microscheme): New variable.
> ---
>  gnu/packages/avr-xyz.scm | 41 +++++++++++++++++++++++++++++++++++++++
>  gnu/packages/avr.scm     | 42 +---------------------------------------
>  2 files changed, 42 insertions(+), 41 deletions(-)
> 
> diff --git a/gnu/packages/avr-xyz.scm b/gnu/packages/avr-xyz.scm
> index a05157ede7..771753b5e4 100644
> --- a/gnu/packages/avr-xyz.scm
> +++ b/gnu/packages/avr-xyz.scm
> @@ -28,14 +28,55 @@ (define-module (gnu packages avr-xyz)
>    #:use-module (gnu packages autotools)
>    #:use-module (gnu packages base)
>    #:use-module (gnu packages bash)
> +  #:use-module (gnu packages check)
> +  #:use-module (gnu packages compression)
>    #:use-module (gnu packages avr)
>    #:use-module (gnu packages elf)
>    #:use-module (gnu packages gl)
> +  #:use-module (gnu packages llvm)
>    #:use-module (gnu packages pkg-config)
>    #:use-module (gnu packages ncurses)
>    #:use-module (gnu packages version-control)
> +  #:use-module (gnu packages vim)
>    #:use-module (gnu packages ruby))
>  
> +(define-public microscheme
> +  (package
> +    (name "microscheme")
> +    (version "0.9.4")
> +    (source
> +     (origin
> +       (method git-fetch)
> +       (uri (git-reference
> +             (url "https://github.com/ryansuchocki/microscheme")
> +             (commit (string-append "v" version))))
> +       (sha256
> +        (base32 "1bflwirpcd58bngbs6hgjfwxl894ni2gpdd4pj10pm2mjhyj5dgw"))
> +       (file-name (git-file-name name version))))
> +    (build-system gnu-build-system)
> +    (arguments
> +     `(#:parallel-build? #f             ; fails to build otherwise
> +       #:tests? #f                      ; no tests
> +       #:phases
> +       (modify-phases %standard-phases
> +         (delete 'configure))
> +       #:make-flags
> +       (list (string-append "PREFIX=" (assoc-ref %outputs "out")))))
> +    (native-inputs
> +     (list clang cppcheck unzip xxd))
> +    (home-page "https://github.com/ryansuchocki/microscheme/")
> +    (synopsis "Scheme subset for Atmel microcontrollers")
> +    (description
> +     "Microscheme, or @code{(ms)} for short, is a functional programming
> +language for the Arduino, and for Atmel 8-bit AVR microcontrollers in general.
> +Microscheme is a subset of Scheme, in the sense that every valid @code{(ms)}
> +program is also a valid Scheme program (with the exception of Arduino
> +hardware-specific primitives).  The @code{(ms)} compiler performs function
> +inlining, and features an aggressive tree-shaker, eliminating unused top-level
> +definitions.  Microscheme has a robust @dfn{Foreign Function Interface} (FFI)
> +meaning that C code may be invoked directly from (ms) programs.")
> +    (license license:expat)))
> +
>  (define-public simavr
>    (package
>      (name "simavr")
> diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
> index e976203b89..ccce686010 100644
> --- a/gnu/packages/avr.scm
> +++ b/gnu/packages/avr.scm
> @@ -32,12 +32,9 @@ (define-module (gnu packages avr)
>    #:use-module (guix build-system gnu)
>    #:use-module (guix build-system trivial)
>    #:use-module (gnu packages check)
> -  #:use-module (gnu packages compression)
>    #:use-module (gnu packages cross-base)
>    #:use-module (gnu packages flashing-tools)
> -  #:use-module (gnu packages gcc)
> -  #:use-module (gnu packages llvm)
> -  #:use-module (gnu packages vim))
> +  #:use-module (gnu packages gcc))
>  
>  (define-public avr-binutils
>    (package
> @@ -142,40 +139,3 @@ (define-public avr-toolchain
>  C++.")
>      (home-page (package-home-page avr-libc))
>      (license (package-license avr-gcc))))
> -
> -(define-public microscheme
> -  (package
> -    (name "microscheme")
> -    (version "0.9.4")
> -    (source
> -     (origin
> -       (method git-fetch)
> -       (uri (git-reference
> -             (url "https://github.com/ryansuchocki/microscheme")
> -             (commit (string-append "v" version))))
> -       (sha256
> -        (base32 "1bflwirpcd58bngbs6hgjfwxl894ni2gpdd4pj10pm2mjhyj5dgw"))
> -       (file-name (git-file-name name version))))
> -    (build-system gnu-build-system)
> -    (arguments
> -     `(#:parallel-build? #f             ; fails to build otherwise
> -       #:tests? #f                      ; no tests
> -       #:phases
> -       (modify-phases %standard-phases
> -         (delete 'configure))
> -       #:make-flags
> -       (list (string-append "PREFIX=" (assoc-ref %outputs "out")))))
> -    (native-inputs
> -     (list clang cppcheck unzip xxd))
> -    (home-page "https://github.com/ryansuchocki/microscheme/")
> -    (synopsis "Scheme subset for Atmel microcontrollers")
> -    (description
> -     "Microscheme, or @code{(ms)} for short, is a functional programming
> -language for the Arduino, and for Atmel 8-bit AVR microcontrollers in general.
> -Microscheme is a subset of Scheme, in the sense that every valid @code{(ms)}
> -program is also a valid Scheme program (with the exception of Arduino
> -hardware-specific primitives).  The @code{(ms)} compiler performs function
> -inlining, and features an aggressive tree-shaker, eliminating unused top-level
> -definitions.  Microscheme has a robust @dfn{Foreign Function Interface} (FFI)
> -meaning that C code may be invoked directly from (ms) programs.")
> -    (license license:expat)))
> -- 
> 2.34.1
> 
> 
> 

-- 
Efraim Flashner   <efraim@flashner.co.il>   רנשלפ םירפא
GPG key = A28B F40C 3E55 1372 662D  14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[bug#66263] [PATCH 04/23] guix: utils: Add target-avr?.

[Efraim Flashner]

[-- Attachment #1: Type: text/plain, Size: 1461 bytes --]

On Fri, Sep 29, 2023 at 11:16:08AM +0200, Jean-Pierre De Jesus DIAZ wrote:
> * guix/utils.scm (target-avr?): New procedure.
> ---
>  guix/utils.scm | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/guix/utils.scm b/guix/utils.scm
> index e9af33bdeb..1724b53149 100644
> --- a/guix/utils.scm
> +++ b/guix/utils.scm
> @@ -98,6 +98,7 @@ (define-module (guix utils)
>              target-arm32?
>              target-aarch64?
>              target-arm?
> +            target-avr?
>              target-ppc32?
>              target-ppc64le?
>              target-powerpc?
> @@ -722,6 +723,9 @@ (define* (target-arm? #:optional (target (or (%current-target-system)
>                                               (%current-system))))
>    (or (target-arm32? target) (target-aarch64? target)))

Is it ever avr<something> or is it always avr? Mostly wondering if it
should be string=?

> +(define* (target-avr? #:optional (target (%current-target-system)))
> +  (string-prefix? "avr" target))
> +
>  (define* (target-ppc32? #:optional (target (or (%current-target-system)
>                                                 (%current-system))))
>    (string-prefix? "powerpc-" target))
> -- 
> 2.34.1
> 
> 
> 

-- 
Efraim Flashner   <efraim@flashner.co.il>   רנשלפ םירפא
GPG key = A28B F40C 3E55 1372 662D  14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[bug#66263] [PATCH 09/23] gnu: Add make-cross-gcc-toolchain.

[Efraim Flashner]

[-- Attachment #1: Type: text/plain, Size: 4135 bytes --]

On Fri, Sep 29, 2023 at 11:16:13AM +0200, Jean-Pierre De Jesus DIAZ wrote:
> * gnu/packages/cross-toolchain.scm (make-cross-gcc-toolchain): New
>   procedure.
> ---
>  gnu/local.mk                     |  1 +
>  gnu/packages/cross-toolchain.scm | 58 ++++++++++++++++++++++++++++++++
>  2 files changed, 59 insertions(+)
>  create mode 100644 gnu/packages/cross-toolchain.scm
> 
> diff --git a/gnu/local.mk b/gnu/local.mk
> index bfa816d717..bdd3af5080 100644
> --- a/gnu/local.mk
> +++ b/gnu/local.mk
> @@ -197,6 +197,7 @@ GNU_SYSTEM_MODULES =				\
>    %D%/packages/crates-graphics.scm		\
>    %D%/packages/crates-gtk.scm			\
>    %D%/packages/cross-base.scm			\
> +  %D%/packages/cross-toolchain.scm			\
>    %D%/packages/crypto.scm			\
>    %D%/packages/cryptsetup.scm			\
>    %D%/packages/cups.scm				\
> diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
> new file mode 100644
> index 0000000000..0062d043a0
> --- /dev/null
> +++ b/gnu/packages/cross-toolchain.scm
> @@ -0,0 +1,58 @@
> +;;; GNU Guix --- Functional package management for GNU
> +;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
> +;;;
> +;;; This file is part of GNU Guix.
> +;;;
> +;;; GNU Guix is free software; you can redistribute it and/or modify it
> +;;; under the terms of the GNU General Public License as published by
> +;;; the Free Software Foundation; either version 3 of the License, or (at
> +;;; your option) any later version.
> +;;;
> +;;; GNU Guix is distributed in the hope that it will be useful, but
> +;;; WITHOUT ANY WARRANTY; without even the implied warranty of
> +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +;;; GNU General Public License for more details.
> +;;;
> +;;; You should have received a copy of the GNU General Public License
> +;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
> +
> +(define-module (gnu packages cross-toolchain)
> +  #:use-module (gnu packages avr)
> +  #:use-module (gnu packages cross-base)
> +  #:use-module (guix build-system trivial)
> +  #:use-module (guix packages)
> +  #:use-module (srfi srfi-1)
> +  #:export (make-cross-gcc-toolchain))
> +
> +(define* (make-cross-gcc-toolchain target
> +                                   #:key
> +                                   (libc (cross-libc target))
> +                                   (xgcc (cross-gcc target #:libc libc))
> +                                   (xbinutils (cross-binutils target)))
> +  (package
> +    (name (string-append (package-name xgcc) "-toolchain"))
> +    (version (package-version xgcc))
> +    (source #f)
> +    (build-system trivial-build-system)
> +    (arguments
> +     '(#:modules ((guix build union))
> +       #:builder (begin
> +         (use-modules (ice-9 match)
> +                      (guix build union))
> +
> +         (match %build-inputs
> +           (((names . directory) ...)
> +            (union-build (assoc-ref %outputs "out") directory))))))
> +    (inputs (list xgcc xbinutils libc))
> +    (native-search-paths (package-native-search-paths xgcc))
> +    (search-paths (package-search-paths xgcc))
> +    (properties (alist-delete 'hidden? (package-properties xgcc)))
> +    (license (package-license xgcc))

Trivial thing but the break in the synopsis really bothers me. I'd put
the string-append starting on the next line

> +    (synopsis (string-append "Complete GCC tool chain for C/C++ development ("
> +                             target ")"))
> +    (description
> +      "This package provides a complete GCC cross tool chain for C/C++
> +development to be installed in user profiles.  This includes GCC, as well as
> +libc (headers and binaries), and Binutils.  GCC is the GNU Compiler
> +Collection.")
> +    (home-page "https://gcc.gnu.org/")))
> -- 
> 2.34.1
> 
> 
> 

-- 
Efraim Flashner   <efraim@flashner.co.il>   רנשלפ םירפא
GPG key = A28B F40C 3E55 1372 662D  14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-base.scm (cross-gcc-arguments)
>   [target-avr?]: Remove --disable-mutlilib and add --enable-multilib.
> ---
>  gnu/packages/avr.scm        |  4 +---
>  gnu/packages/cross-base.scm | 17 +++++++++++++----
>  2 files changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
> index b9bee5e624..e976203b89 100644
> --- a/gnu/packages/avr.scm
> +++ b/gnu/packages/avr.scm
> @@ -75,9 +75,7 @@ (define avr-gcc
>                    ;; several scripts inside this script, each with a #!/bin/sh
>                    ;; that needs patching.
>                    (substitute* "gcc/genmultilib"
> -                    (("#!/bin/sh") (string-append "#!" (which "sh"))))))))
> -         ((#:configure-flags flags)
> -          #~(delete "--disable-multilib" #$flags))))
> +                    (("#!/bin/sh") (string-append "#!" (which "sh"))))))))))
>        (native-search-paths
>         (list (search-path-specification
>                (variable "CROSS_C_INCLUDE_PATH")
> diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
> index f55765f1b0..ec7ca2186d 100644
> --- a/gnu/packages/cross-base.scm
> +++ b/gnu/packages/cross-base.scm
> @@ -197,12 +197,21 @@ (define (cross-gcc-arguments target xgcc libc)
>                                  #~((string-append "--with-toolexeclibdir="
>                                                    (assoc-ref %outputs "lib")
>                                                    "/" #$target "/lib"))
> +                                #~())
> +
> +                         #$@(if (target-avr? target)
> +                                #~("--enable-multilib")
> +                                #~())
> +
>                                  #~()))
>  
> -                   #$(if libc
> -                         flags
> -                         #~(remove (cut string-match "--enable-languages.*" <>)
> -                                   #$flags))))
> +                   (remove
> +                     (lambda (flag)
> +                       (or (and (string-match "--enable-languages.*" flag)
> +                                #$libc)

Not your code, but it'd be cleaner to use (string-prefix?
"--enable-languages" flag) here.

> +                           (and (string-match "--disable-multilib" flag)
> +                                #$(target-avr? target))))

I'd also move the #$libc above and #$(target-avr? ...) expressions as
the first tests for 'and', as there is no reason to match strings when
these are #f.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Maxim Cournoyer]

Hello,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/avr.scm (make-avr-libc): New procedure.
>
> * gnu/packages/avr.scm (avr-libc): Use make-avr-libc procedure.
> ---
>  gnu/packages/avr.scm | 19 +++++++++++++------
>  1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
> index ccce686010..df1523274b 100644
> --- a/gnu/packages/avr.scm
> +++ b/gnu/packages/avr.scm
> @@ -34,7 +34,8 @@ (define-module (gnu packages avr)
>    #:use-module (gnu packages check)
>    #:use-module (gnu packages cross-base)
>    #:use-module (gnu packages flashing-tools)
> -  #:use-module (gnu packages gcc))
> +  #:use-module (gnu packages gcc)
> +  #:export (make-avr-libc))
>  
>  (define-public avr-binutils
>    (package
> @@ -93,7 +94,9 @@ (define avr-gcc
>         `(("gcc" ,gcc)
>           ,@(package-native-inputs xgcc))))))
>  
> -(define avr-libc
> +(define* (make-avr-libc #:key
> +                        (xbinutils (cross-binutils "avr"))
> +                        (xgcc (cross-gcc "avr")))
>    (package
>      (name "avr-libc")

[...]

Procedures returning packages should be memoized, using 'memoize' from
(guix memoization) here since you have keyword arguments.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Maxim Cournoyer]

Hi,


Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/avr.scm (microscheme): Remove from file.
>
> * gnu/packages/avr-xyz.scm (microscheme): New variable.

Nitpicks: I'd drop the separating blank line and reword to:

--8<---------------cut here---------------start------------->8---
* gnu/packages/avr.scm (microscheme): Move to...
* gnu/packages/avr-xyz.scm (microscheme): ... here.
--8<---------------cut here---------------end--------------->8---

-- 
Thanks,
Maxim

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/avr.scm (make-avr-libc): New procedure.
>
> * gnu/packages/avr.scm (avr-libc): Use make-avr-libc procedure.
> ---
>  gnu/packages/avr.scm | 19 +++++++++++++------
>  1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
> index ccce686010..df1523274b 100644
> --- a/gnu/packages/avr.scm
> +++ b/gnu/packages/avr.scm
> @@ -34,7 +34,8 @@ (define-module (gnu packages avr)
>    #:use-module (gnu packages check)
>    #:use-module (gnu packages cross-base)
>    #:use-module (gnu packages flashing-tools)
> -  #:use-module (gnu packages gcc))
> +  #:use-module (gnu packages gcc)
> +  #:export (make-avr-libc))
>  
>  (define-public avr-binutils
>    (package
> @@ -93,7 +94,9 @@ (define avr-gcc
>         `(("gcc" ,gcc)
>           ,@(package-native-inputs xgcc))))))
>  
> -(define avr-libc
> +(define* (make-avr-libc #:key
> +                        (xbinutils (cross-binutils "avr"))
> +                        (xgcc (cross-gcc "avr")))

I had forgotten: please document any newly added procedures with doc
strings, especially public ones.

>    (package
>      (name "avr-libc")
>      (version "2.0.0")
> @@ -106,10 +109,12 @@ (define avr-libc
>                  "15svr2fx8j6prql2il2fc0ppwlv50rpmyckaxx38d3gxxv97zpdj"))))
>      (build-system gnu-build-system)
>      (arguments
> -     '(#:out-of-source? #t
> -       #:configure-flags '("--host=avr")))
> -    (native-inputs `(("avr-binutils" ,avr-binutils)
> -                     ("avr-gcc" ,avr-gcc)))
> +     (list #:target "avr"
> +
> +           #:out-of-source? #t
> +
> +           #:implicit-cross-inputs? #f))
> +    (native-inputs (list xbinutils xgcc))
>      (home-page "https://www.nongnu.org/avr-libc/")
>      (synopsis "The AVR C Library")

This already was like this, but the leading 'The' determinant should be
dropped for synopsis.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-toolchain.scm (make-cross-gcc-toolchain): New
>   procedure.

You forgot to mention the registration of the new module in the local.mk
file.

[...]

> +++ b/gnu/packages/cross-toolchain.scm
> @@ -0,0 +1,58 @@
> +;;; GNU Guix --- Functional package management for GNU
> +;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
> +;;;
> +;;; This file is part of GNU Guix.
> +;;;
> +;;; GNU Guix is free software; you can redistribute it and/or modify it
> +;;; under the terms of the GNU General Public License as published by
> +;;; the Free Software Foundation; either version 3 of the License, or (at
> +;;; your option) any later version.
> +;;;
> +;;; GNU Guix is distributed in the hope that it will be useful, but
> +;;; WITHOUT ANY WARRANTY; without even the implied warranty of
> +;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> +;;; GNU General Public License for more details.
> +;;;
> +;;; You should have received a copy of the GNU General Public License
> +;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
> +
> +(define-module (gnu packages cross-toolchain)
> +  #:use-module (gnu packages avr)
> +  #:use-module (gnu packages cross-base)
> +  #:use-module (guix build-system trivial)
> +  #:use-module (guix packages)
> +  #:use-module (srfi srfi-1)
> +  #:export (make-cross-gcc-toolchain))


I'm a bit confused; why do we need this new module; couldn't it live in
(gnu packages cross-base)?  Also, there are extraneous imports: (gnu packages
avr) is not needed for one.  With a recent Guile you can check for such
imports with

--8<---------------cut here---------------start------------->8---
guild compile -W3 your-file.scm
--8<---------------cut here---------------end--------------->8---

> +(define* (make-cross-gcc-toolchain target
> +                                   #:key
> +                                   (libc (cross-libc target))
> +                                   (xgcc (cross-gcc target #:libc libc))
> +                                   (xbinutils (cross-binutils target)))

Please add a doc string, and memoize packages returning procedures like
this one.

> +  (package
> +    (name (string-append (package-name xgcc) "-toolchain"))
> +    (version (package-version xgcc))
> +    (source #f)
> +    (build-system trivial-build-system)
> +    (arguments
> +     '(#:modules ((guix build union))
> +       #:builder (begin
> +         (use-modules (ice-9 match)
> +                      (guix build union))

This will work as long as all the file names are ASCII only, as there's
no locale support in the trivial-build-system.  I guess this is not a
problem here, but just mentioning it, as it bit me in the past.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 10/23] gnu: Add binutils-cross-avr.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-toolchain.scm (binutils-cross-avr): New variable.
> ---
>  gnu/packages/cross-toolchain.scm | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
> index 0062d043a0..5617959851 100644
> --- a/gnu/packages/cross-toolchain.scm
> +++ b/gnu/packages/cross-toolchain.scm
> @@ -56,3 +56,8 @@ (define* (make-cross-gcc-toolchain target
>  libc (headers and binaries), and Binutils.  GCC is the GNU Compiler
>  Collection.")
>      (home-page "https://gcc.gnu.org/")))
> +
> +;;; Cross binutils:
> +
> +(define-public binutils-cross-avr
> +  (cross-binutils "avr"))

Since this module *uses* the cross* procedures that are likely to create
top level cycles, it should be stressed after the imports near the top
in a ;;; Commentary:  comment block that this module exists solely to
provide a convenient way to install the cross toolchains as packages,
and should NOT be imported by any other module to avoid introducing
module cycles.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 11/23] gnu: avr-binutils: Deprecate package.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/avr.scm (avr-binutils): Delete variable.
>
> * gnu/packages/cross-toolchain.scm (avr-binutils): New deprecated
> variable.

nitpick: I'd drop the newline between file names in the ChangeLog, but
otherwise, LGTM.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 12/23] gnu: Remove various AVR packages.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/avr.scm (avr-gcc): Remove variable.
>   (avr-libc): Ditto.
>   (avr-toolchain): Ditto.

nitpick: Superfluous hanging indent in GNU ChangeLog.

I think you'll want to rebase this series onto master, as the avr module
has changed since this was made.  There are no longer packages such as
avr-toolchain, they are procedures now.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 13/23] gnu: cross-libc: Add AVR Libc case.

[Maxim Cournoyer]

Hello,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-base.scm (cross-libc): Handle the AVR target case
>   and return AVR Libc package.

nitpick: hanging indent :-).  Otherwise, LGTM.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 14/23] gnu: cross-gcc-arguments: Handle AVR target.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-base.scm (cross-gcc-arguments): Handle AVR target.
> ---
>  gnu/packages/cross-base.scm | 25 ++++++++++++++++++++-----
>  1 file changed, 20 insertions(+), 5 deletions(-)
>
> diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
> index fc21e7c4fd..10d912b755 100644
> --- a/gnu/packages/cross-base.scm
> +++ b/gnu/packages/cross-base.scm
> @@ -204,23 +204,38 @@ (define (cross-gcc-arguments target xgcc libc)
>                                  #~("--enable-multilib")
>                                  #~())
>  
> +                         #$@(if (and libc (target-avr? target))
> +                                #~("--enable-languages=c,c++"
> +                                   (string-append "--with-native-system-header-dir="
> +                                                  #$libc "/avr/include" ))
>                                  #~()))
>  
>                     (remove
>                       (lambda (flag)
>                         (or (and (string-match "--enable-languages.*" flag)
>                                  #$libc)
> +                           (and (string-match "--with-native-system-header-dir.*"
> +                                              flag)
> +                                #$libc
> +                                #$(target-avr? target))
>                             (and (string-match "--disable-multilib" flag)
>                                  #$(target-avr? target))))
>                       #$flags)))
>          ((#:make-flags flags)
> -         (if libc
> -             #~(let ((libc (assoc-ref %build-inputs "libc")))
> +         (cond
> +           ((and (target-avr? target) libc)
> +            #~(let ((libc (assoc-ref %build-inputs "libc")))

While at it, you may want to use the more modern #$(this-package-input
"libc")

>                  ;; FLAGS_FOR_TARGET are needed for the target libraries to receive
>                  ;; the -Bxxx for the startfiles.
> -                 (cons (string-append "FLAGS_FOR_TARGET=-B" libc "/lib")
> -                       #$flags))
> -             flags))
> +                (cons (string-append "FLAGS_FOR_TARGET=-B" libc "/avr/lib")
> +                      #$flags)))
> +           (libc
> +            #~(let ((libc (assoc-ref %build-inputs "libc")))
> +                ;; FLAGS_FOR_TARGET are needed for the target libraries to receive
> +                ;; the -Bxxx for the startfiles.
> +                (cons (string-append "FLAGS_FOR_TARGET=-B" libc "/lib")
> +                      #$flags)))
> +           (else flags)))

The only thing that needs to be made conditional here is the "/lib" vs
"/avr/lib" prefix, so you could let-bind a LIB-PREFIX variable
conditionally and keep the rest shared.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 15/23] guix: meson-configuration: Fix boolean assigment.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * guix/build/meson-configuration.scm (write-assigment): Print true for
>   #t and false for #f.  Previously it was inverting the values.

LGTM.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 16/23] gnu: cross-gcc-search-paths: Handle AVR target.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-base.scm (cross-gcc-search-paths): Handle AVR
>   target case.
> ---
>  gnu/packages/cross-base.scm | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>
> diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
> index 10d912b755..ee90424076 100644
> --- a/gnu/packages/cross-base.scm
> +++ b/gnu/packages/cross-base.scm
> @@ -267,6 +267,31 @@ (define (cross-gcc-snippet target)
>          "-DTOOLDIR_BASE_PREFIX=\\\"../../../../\\\""))
>       #t))
>  
> +(define (cross-gcc-search-paths target)
> +  "Return GCC search paths needed for TARGET."
> +  (cons (search-path-specification
> +          (variable "CROSS_LIBRARY_PATH")
> +          (files `("lib" "lib64"
> +                   ,@(list (string-append target "/lib")
> +                           (string-append target "/lib64")))))
> +
> +        (map (lambda (variable)
> +               (search-path-specification
> +                 (variable variable)
> +
> +                 ;; Add 'include/c++' here so that <cstdlib>'s
> +                 ;; "#include_next <stdlib.h>" finds GCC's
> +                 ;; <stdlib.h>, not libc's.
> +                 (files (match variable
> +                          ("CROSS_CPLUS_INCLUDE_PATH"
> +                           `("include/c++" "include"
> +                             ,@(list (string-append target "/include/c++")
> +                                     (string-append target "/include"))))
> +                          (_
> +                           `("include"
> +                             ,@(string-append target "/include")))))))
> +             %gcc-cross-include-paths)))

That was a bit hard to parse, but LGTM.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 17/23] gnu: cross-gcc: Handle inputs for AVR.

[Maxim Cournoyer]

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-base.scm (cross-gcc) <inputs>: Handle inputs for
>   AVR.

LGTM.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 18/23] gnu: Add avr-libc.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-toolchain.scm (avr-libc): New variable.
> ---
>  gnu/packages/cross-toolchain.scm | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
> index 77af6b862b..929e665e50 100644
> --- a/gnu/packages/cross-toolchain.scm
> +++ b/gnu/packages/cross-toolchain.scm
> @@ -65,3 +65,8 @@ (define-public binutils-cross-avr
>  
>  (define-deprecated/public avr-binutils binutils-cross-avr
>    (deprecated-package "avr-binutils" binutils-cross-avr))
> +
> +;;; C standard libraries:
> +
> +(define-public avr-libc
> +  (cross-libc "avr"))

LGTM, with the Commentary section added as suggested before to warn this
module should *not* be imported elsewhere, for cyclic module
dependency reasons.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 19/23] gnu: Add gcc-cross-avr-toolchain.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/cross-toolchain.scm (gcc-cross-avr-toolchain): New
>   variable.
> ---
>  gnu/packages/cross-toolchain.scm | 8 ++++++++
>  1 file changed, 8 insertions(+)
>
> diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
> index 929e665e50..2ee039c7f6 100644
> --- a/gnu/packages/cross-toolchain.scm
> +++ b/gnu/packages/cross-toolchain.scm
> @@ -70,3 +70,11 @@ (define-deprecated/public avr-binutils binutils-cross-avr
>  
>  (define-public avr-libc
>    (cross-libc "avr"))
> +
> +;;; Cross toolchains:
> +
> +(define-public gcc-cross-avr-toolchain
> +  (make-cross-gcc-toolchain "avr"
> +                            #:libc avr-libc
> +                            #:xgcc (cross-gcc "avr" #:libc avr-libc)
> +                            #:xbinutils binutils-cross-avr))

Is this still necessary given the make-avr-toolchain procedure we have?
Perhaps it can use that?  To be rebased on master.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 21/23] guix: meson-build-system: Support AVR.

[Maxim Cournoyer]

Hello,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * guix/build-system/meson.scm (make-machine-alist)
>   <system> [target-avr?]: Set to none.
>   <cpu_family> [target-avr?]: Set to avr.
>   <cpu> [target-avr?]: Set to avr.

LGTM.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 22/23] guix: meson-build-system: Disable PIC for AVR.

[Maxim Cournoyer]

Hello,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * guix/build-system/meson.scm (make-built-in-options-alist): New
>   variable.
>
> * guix/build-system/meson.scm (make-cross-file): Add 'built-in options'
>   section to cross file.

I'm no Meson expert, but that LGTM.

-- 
Thanks,
Maxim

[bug#66263] [PATCH 23/23] gnu: Add unity.

[Maxim Cournoyer]

Hi,

Jean-Pierre De Jesus DIAZ <jean@foundationdevices.com> writes:

> * gnu/packages/check.scm (unity): New variable.
> ---
>  gnu/packages/check.scm | 41 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>
> diff --git a/gnu/packages/check.scm b/gnu/packages/check.scm
> index 5af3b49280..db368663d4 100644
> --- a/gnu/packages/check.scm
> +++ b/gnu/packages/check.scm
> @@ -87,6 +87,7 @@ (define-module (gnu packages check)
>    #:use-module (gnu packages python-web)
>    #:use-module (gnu packages python-xyz)
>    #:use-module (gnu packages python-science)
> +  #:use-module (gnu packages ruby)
>    #:use-module (gnu packages texinfo)
>    #:use-module (gnu packages time)
>    #:use-module (gnu packages xml)
> @@ -3170,6 +3171,46 @@ (define-public unittest-cpp
>  portable to just about any platform.")
>      (license license:expat)))
>  
> +(define-public unity
> +  (let ((revision "0")
> +        (commit "2775e1b05875cf45afce7153e36af76ddbfdba26"))
> +    (package
> +      (name "unity")
> +      (version (git-version "2.5.4" revision commit))
> +      (source (origin
> +                (method git-fetch)
> +                (uri (git-reference
> +                       (url "https://github.com/ThrowTheSwitch/Unity")
> +                       (commit commit)))
> +                (file-name (git-file-name name version))
> +                (sha256
> +                 (base32
> +                  "0y803ibjkqvj1fil0a0hzs7x0m98amm5ibwl8xxk3p8bj9wgdps1"))))
> +      (build-system meson-build-system)
> +      (arguments
> +       (list #:configure-flags #~(list "-Dextension_fixture=true"
> +                                       "-Dextension_memory=true"
> +                                       "-Dsupport_double=true")
> +             #:phases #~(modify-phases %standard-phases
> +                          (replace 'check
> +                            (lambda* (#:key tests? #:allow-other-keys)
> +                              (when tests?
> +                                (with-directory-excursion "../source/test"
> +                                  (invoke "rake" "all"))))))))
> +      (native-inputs
> +        (append (list python)
> +                (if (not (%current-target-system))
> +                         (list ruby
> +                               ruby-rake
> +                               ruby-rspec
> +                               ruby-rubocop)
> +                         '())))

I believe these are test-related inputs?  Should the tests be disabled
when cross-compiling?  Otherwise it'd probably fail, no?

-- 
Thanks,
Maxim

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Maxim Cournoyer]

Hi,

Mathieu Othacehe <othacehe@gnu.org> writes:

> Hello,
>
>> The [PATCH 21/23] fixes a bug in the meson-configuration module
>> and can be applied independently.
>
> I applied this one. Now the rest of the series also seems fine to me.
> Maxim, Efraim, Vagrant any thoughts?

I've reviewed the series, thanks for the ping.  It seems it'll need to
be rebased on master as some of the changes conflict with turning the
previous avr-toolchain and friends into procedure that was merged
perhaps a week ago.

-- 
Thanks,
Maxim

[bug#66263] [PATCH v1 01/22] gnu: cross-libc: Return #f if no libc available.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-libc): Return #f if no libc is
  available for the given TARGET.

Change-Id: I17d19716373dd5704bb70d805437738fd29bd96b
---
 gnu/packages/cross-base.scm | 140 ++++++++++++++++++------------------
 1 file changed, 72 insertions(+), 68 deletions(-)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index 14cb365099..4b7c4b6cbe 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -610,74 +610,78 @@ (define* (cross-libc* target
                       (xbinutils (cross-binutils target))
                       (xheaders (cross-kernel-headers target)))
   "Return LIBC cross-built for TARGET, a GNU triplet. Use XGCC and XBINUTILS
-and the cross tool chain."
-  (if (target-mingw? target)
-      (let ((machine (substring target 0 (string-index target #\-))))
-        (make-mingw-w64 machine
-                        #:xgcc xgcc
-                        #:xbinutils xbinutils))
-      (package
-        (inherit libc)
-        (name (string-append "glibc-cross-" target))
-        (arguments
-         (substitute-keyword-arguments
-             `( ;; Disable stripping (see above.)
-               #:strip-binaries? #f
-
-               ;; This package is used as a target input, but it should not have
-               ;; the usual cross-compilation inputs since that would include
-               ;; itself.
-               #:implicit-cross-inputs? #f
-
-               ;; We need SRFI 26.
-               #:modules ((guix build gnu-build-system)
-                          (guix build utils)
-                          (srfi srfi-26))
-
-               ,@(package-arguments libc))
-           ((#:configure-flags flags)
-            `(cons ,(string-append "--host=" target)
-                   ,(if (target-hurd? target)
-                        `(append (list "--disable-werror"
-                                       ,@%glibc/hurd-configure-flags)
-                                 ,flags)
-                        flags)))
-           ((#:phases phases)
-            `(modify-phases ,phases
-               (add-before 'configure 'set-cross-kernel-headers-path
-                 (lambda* (#:key inputs #:allow-other-keys)
-                   (let* ((kernel (assoc-ref inputs "kernel-headers"))
-                          (cpath (string-append kernel "/include")))
-                     (for-each (cut setenv <> cpath)
-                               ',%gcc-cross-include-paths)
-                     (setenv "CROSS_LIBRARY_PATH"
-                             (string-append kernel "/lib")) ; for Hurd's libihash
-                     #t)))
-               ,@(if (target-hurd? target)
-                     '((add-after 'install 'augment-libc.so
-                         (lambda* (#:key outputs #:allow-other-keys)
-                           (let* ((out (assoc-ref outputs "out")))
-                             (substitute* (string-append out "/lib/libc.so")
-                               (("/[^ ]+/lib/libc.so.0.3")
-                                (string-append out "/lib/libc.so.0.3"
-                                               " libmachuser.so libhurduser.so"))))
-                           #t)))
-                     '())))))
-
-        ;; Shadow the native "kernel-headers" because glibc's recipe expects the
-        ;; "kernel-headers" input to point to the right thing.
-        (propagated-inputs `(("kernel-headers" ,xheaders)))
-
-        (native-inputs `(("cross-gcc" ,xgcc)
-                         ("cross-binutils" ,xbinutils)
-                         ,@(if (target-hurd? target)
-                               `(("cross-mig"
-                                  ,(cross-mig target
-                                              #:xgcc xgcc
-                                              #:xbinutils xbinutils)))
-                               '())
-                         ,@(package-inputs libc) ;FIXME: static-bash
-                         ,@(package-native-inputs libc))))))
+and the cross tool chain.  If TARGET doesn't have a standard C library #f is
+returned."
+  (match target
+   ((? target-mingw?)
+    (let ((machine (substring target 0 (string-index target #\-))))
+      (make-mingw-w64 machine
+                      #:xgcc xgcc
+                      #:xbinutils xbinutils)))
+   ((or (? target-linux?) (? target-hurd?))
+    (package
+      (inherit libc)
+      (name (string-append "glibc-cross-" target))
+      (arguments
+       (substitute-keyword-arguments
+           `( ;; Disable stripping (see above.)
+             #:strip-binaries? #f
+
+             ;; This package is used as a target input, but it should not have
+             ;; the usual cross-compilation inputs since that would include
+             ;; itself.
+             #:implicit-cross-inputs? #f
+
+             ;; We need SRFI 26.
+             #:modules ((guix build gnu-build-system)
+                        (guix build utils)
+                        (srfi srfi-26))
+
+             ,@(package-arguments libc))
+         ((#:configure-flags flags)
+          `(cons ,(string-append "--host=" target)
+                 ,(if (target-hurd? target)
+                      `(append (list "--disable-werror"
+                                     ,@%glibc/hurd-configure-flags)
+                               ,flags)
+                      flags)))
+         ((#:phases phases)
+          `(modify-phases ,phases
+             (add-before 'configure 'set-cross-kernel-headers-path
+               (lambda* (#:key inputs #:allow-other-keys)
+                 (let* ((kernel (assoc-ref inputs "kernel-headers"))
+                        (cpath (string-append kernel "/include")))
+                   (for-each (cut setenv <> cpath)
+                             ',%gcc-cross-include-paths)
+                   (setenv "CROSS_LIBRARY_PATH"
+                              (string-append kernel "/lib")) ; for Hurd's libihash
+                      #t)))
+                ,@(if (target-hurd? target)
+                      '((add-after 'install 'augment-libc.so
+                          (lambda* (#:key outputs #:allow-other-keys)
+                            (let* ((out (assoc-ref outputs "out")))
+                              (substitute* (string-append out "/lib/libc.so")
+                                (("/[^ ]+/lib/libc.so.0.3")
+                                 (string-append out "/lib/libc.so.0.3"
+                                                " libmachuser.so libhurduser.so"))))
+                            #t)))
+                      '())))))
+
+         ;; Shadow the native "kernel-headers" because glibc's recipe expects the
+         ;; "kernel-headers" input to point to the right thing.
+         (propagated-inputs `(("kernel-headers" ,xheaders)))
+
+         (native-inputs `(("cross-gcc" ,xgcc)
+                          ("cross-binutils" ,xbinutils)
+                          ,@(if (target-hurd? target)
+                                `(("cross-mig"
+                                   ,(cross-mig target
+                                               #:xgcc xgcc
+                                               #:xbinutils xbinutils)))
+                                '())
+                          ,@(package-inputs libc) ;FIXME: static-bash
+                          ,@(package-native-inputs libc)))))
+   (else #f)))
 
 \f
 ;;; Concrete cross tool chains are instantiated like this:
-- 
2.41.0

[bug#66263] [PATCH v1 02/22] guix: gnu-build-system: Handle missing libc.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/build-system/gnu.scm (standard-cross-packages): Handle the case
  when `cross-libc` returns #f.

Change-Id: I85ee5456f10ff141d521a5f2d91267cd612c5616
---
 guix/build-system/gnu.scm | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/guix/build-system/gnu.scm b/guix/build-system/gnu.scm
index c1aa187c42..cdbb547773 100644
--- a/guix/build-system/gnu.scm
+++ b/guix/build-system/gnu.scm
@@ -460,10 +460,13 @@ (define standard-cross-packages
            `(("cross-gcc" ,(gcc target
                                 #:xbinutils (binutils target)
                                 #:libc libc))
-             ("cross-libc" ,libc)
+             ;; Some targets don't have a libc. (e.g. *-elf targets).
+             ,@(if libc
+                   `(("cross-libc" ,libc))
+                   '())
 
              ;; MinGW's libc doesn't have a "static" output.
-             ,@(if (member "static" (package-outputs libc))
+             ,@(if (and libc (member "static" (package-outputs libc)))
                    `(("cross-libc:static" ,libc "static"))
                    '()))))))))
 
-- 
2.41.0

[bug#66263] [PATCH v1 03/22] guix: Add avr platform.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* Makefile.am (MODULES): Add avr platform module.
* doc/guix.texi: Add documentation for avr platform.
* guix/platforms/avr.scm (avr): New variable.

Change-Id: I0f425eac61a71390b618e093f5a034ad4205a6f4
---
 Makefile.am            |  1 +
 doc/guix.texi          |  7 +++++++
 guix/platforms/avr.scm | 28 ++++++++++++++++++++++++++++
 3 files changed, 36 insertions(+)
 create mode 100644 guix/platforms/avr.scm

diff --git a/Makefile.am b/Makefile.am
index cbc3191dfc..9784b19054 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -138,6 +138,7 @@ MODULES =					\
   guix/ipfs.scm					\
   guix/platform.scm                             \
   guix/platforms/arm.scm                        \
+  guix/platforms/avr.scm                        \
   guix/platforms/mips.scm                       \
   guix/platforms/powerpc.scm                    \
   guix/platforms/riscv.scm                      \
diff --git a/doc/guix.texi b/doc/guix.texi
index 1fd2e21608..1026e24ebe 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -119,6 +119,7 @@ Copyright @copyright{} 2023 Tanguy Le Carrour@*
 Copyright @copyright{} 2023 Zheng Junjie@*
 Copyright @copyright{} 2023 Brian Cully@*
 Copyright @copyright{} 2023 Felix Lechner@*
+Copyright @copyright{} 2023 Foundation Devices, Inc.@*
 
 Permission is granted to copy, distribute and/or modify this document
 under the terms of the GNU Free Documentation License, Version 1.3 or
@@ -16699,6 +16700,7 @@ The available targets are:
 
    - aarch64-linux-gnu
    - arm-linux-gnueabihf
+   - avr
    - i586-pc-gnu
    - i686-linux-gnu
    - i686-w64-mingw32
@@ -45789,6 +45791,11 @@ Platform targeting x86 CPU running GNU/Hurd (also referred to as
 ``GNU'').
 @end defvar
 
+@defvar avr
+Platform targeting AVR CPUs without an operating system, with run-time support
+from AVR Libc.
+@end defvar
+
 @node System Images
 @chapter Creating System Images
 
diff --git a/guix/platforms/avr.scm b/guix/platforms/avr.scm
new file mode 100644
index 0000000000..ba178db6ea
--- /dev/null
+++ b/guix/platforms/avr.scm
@@ -0,0 +1,28 @@
+;;; GNU Guix --- Functional package management for GNU
+;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
+;;;
+;;; This file is part of GNU Guix.
+;;;
+;;; GNU Guix is free software; you can redistribute it and/or modify it
+;;; under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3 of the License, or (at
+;;; your option) any later version.
+;;;
+;;; GNU Guix is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
+
+(define-module (guix platforms avr)
+  #:use-module (guix platform)
+  #:use-module (guix records)
+  #:export (avr))
+
+(define avr
+  (platform
+   (target "avr")
+   (system #f)
+   (glibc-dynamic-linker #f)))
-- 
2.41.0

[bug#66263] [PATCH v1 04/22] guix: Add target-avr?.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/utils.scm (target-avr?): New procedure.
* tests/utils.scm: Add tests for target-avr? procedure.

Change-Id: Iaa0fa97a2b6bc45d45f907f43157f1548a0ba3fa
---
 guix/utils.scm  |  6 ++++++
 tests/utils.scm | 12 ++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/guix/utils.scm b/guix/utils.scm
index 7a42b49df2..8e71f97e1c 100644
--- a/guix/utils.scm
+++ b/guix/utils.scm
@@ -19,6 +19,7 @@
 ;;; Copyright © 2023 Philip McGrath <philip@philipmcgrath.com>
 ;;; Copyright © 2023 Janneke Nieuwenhuizen <janneke@gnu.org>
 ;;; Copyright © 2023 Zheng Junjie <873216071@qq.com>
+;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -99,6 +100,7 @@ (define-module (guix utils)
             target-arm32?
             target-aarch64?
             target-arm?
+            target-avr?
             target-ppc32?
             target-ppc64le?
             target-powerpc?
@@ -724,6 +726,10 @@ (define* (target-arm? #:optional (target (or (%current-target-system)
                                              (%current-system))))
   (or (target-arm32? target) (target-aarch64? target)))
 
+(define* (target-avr? #:optional (target (%current-target-system)))
+  "Is the architecture of TARGET a variant of Microchip's AVR architecture?"
+  (or (string=? target "avr") (string-prefix? "avr-" target)))
+
 (define* (target-ppc32? #:optional (target (or (%current-target-system)
                                                (%current-system))))
   (string-prefix? "powerpc-" target))
diff --git a/tests/utils.scm b/tests/utils.scm
index 648e91f242..5664165c85 100644
--- a/tests/utils.scm
+++ b/tests/utils.scm
@@ -4,6 +4,7 @@
 ;;; Copyright © 2016 Mathieu Lirzin <mthl@gnu.org>
 ;;; Copyright © 2021 Simon Tournier <zimon.toutoune@gmail.com>
 ;;; Copyright © 2021 Maxime Devos <maximedevos@telenet.be>
+;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -329,6 +330,17 @@ (define (test-compression/decompression method run?)
          ;; However, it isn't 32-bit.
          ,(format #f "x86_~a-linux-gnu" (expt 2 109)))))
 
+(test-equal "target-avr?"
+  '(#t #t #t #f #f)
+  (map target-avr?
+       '("avr" "avr-unknown-none"
+         ;; In addition LLVM also uses this form.
+         "avr-unknown-unknown"
+         ;; The AVR32 architecture also was made by Atmel/Microchip but it
+         ;; does not resemble the AVR family, they aren't compatible in any
+         ;; way.
+         "avr32" "avr32-unknown-none")))
+
 (test-end)
 
 (false-if-exception (delete-file temp-file))
-- 
2.41.0

[bug#66263] [PATCH v1 05/22] gnu: microscheme: Move to avr-xyz.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/avr.scm (microscheme): Move to ...
* gnu/packages/avr-xyz.scm (microscheme): ... here.

Change-Id: I1272bfc98b583ab0ab36fcba5a8e19ae018b0b80
---
 gnu/packages/avr-xyz.scm | 41 ++++++++++++++++++++++++++++++++++++++++
 gnu/packages/avr.scm     | 37 ------------------------------------
 2 files changed, 41 insertions(+), 37 deletions(-)

diff --git a/gnu/packages/avr-xyz.scm b/gnu/packages/avr-xyz.scm
index e0db2e3a0c..cc34189841 100644
--- a/gnu/packages/avr-xyz.scm
+++ b/gnu/packages/avr-xyz.scm
@@ -29,13 +29,17 @@ (define-module (gnu packages avr-xyz)
   #:use-module (gnu packages autotools)
   #:use-module (gnu packages base)
   #:use-module (gnu packages bash)
+  #:use-module (gnu packages check)
+  #:use-module (gnu packages compression)
   #:use-module (gnu packages avr)
   #:use-module (gnu packages documentation)
   #:use-module (gnu packages elf)
   #:use-module (gnu packages gl)
   #:use-module (gnu packages pkg-config)
+  #:use-module (gnu packages llvm)
   #:use-module (gnu packages ncurses)
   #:use-module (gnu packages version-control)
+  #:use-module (gnu packages vim)
   #:use-module (gnu packages ruby))
 
 (define-public simavr
@@ -178,3 +182,40 @@ (define-public lufa
 compatible microcontroller models, as well as the demos and the
 documentation.")
     (license license:expat)))           ;see LUFA/License.txt
+
+(define-public microscheme
+  (package
+    (name "microscheme")
+    (version "0.9.4")
+    (source
+     (origin
+       (method git-fetch)
+       (uri (git-reference
+             (url "https://github.com/ryansuchocki/microscheme")
+             (commit (string-append "v" version))))
+       (sha256
+        (base32 "1bflwirpcd58bngbs6hgjfwxl894ni2gpdd4pj10pm2mjhyj5dgw"))
+       (file-name (git-file-name name version))))
+    (build-system gnu-build-system)
+    (arguments
+     `(#:parallel-build? #f             ; fails to build otherwise
+       #:tests? #f                      ; no tests
+       #:phases
+       (modify-phases %standard-phases
+         (delete 'configure))
+       #:make-flags
+       (list (string-append "PREFIX=" (assoc-ref %outputs "out")))))
+    (native-inputs
+     (list clang cppcheck unzip xxd))
+    (home-page "https://github.com/ryansuchocki/microscheme/")
+    (synopsis "Scheme subset for Atmel microcontrollers")
+    (description
+     "Microscheme, or @code{(ms)} for short, is a functional programming
+language for the Arduino, and for Atmel 8-bit AVR microcontrollers in general.
+Microscheme is a subset of Scheme, in the sense that every valid @code{(ms)}
+program is also a valid Scheme program (with the exception of Arduino
+hardware-specific primitives).  The @code{(ms)} compiler performs function
+inlining, and features an aggressive tree-shaker, eliminating unused top-level
+definitions.  Microscheme has a robust @dfn{Foreign Function Interface} (FFI)
+meaning that C code may be invoked directly from (ms) programs.")
+    (license license:expat)))
diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index a66abbbd3a..111547ef87 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -175,40 +175,3 @@ (define* (make-avr-toolchain/implementation #:key (xgcc gcc))
 
 (define make-avr-toolchain
   (memoize make-avr-toolchain/implementation))
-
-(define-public microscheme
-  (package
-    (name "microscheme")
-    (version "0.9.4")
-    (source
-     (origin
-       (method git-fetch)
-       (uri (git-reference
-             (url "https://github.com/ryansuchocki/microscheme")
-             (commit (string-append "v" version))))
-       (sha256
-        (base32 "1bflwirpcd58bngbs6hgjfwxl894ni2gpdd4pj10pm2mjhyj5dgw"))
-       (file-name (git-file-name name version))))
-    (build-system gnu-build-system)
-    (arguments
-     `(#:parallel-build? #f             ; fails to build otherwise
-       #:tests? #f                      ; no tests
-       #:phases
-       (modify-phases %standard-phases
-         (delete 'configure))
-       #:make-flags
-       (list (string-append "PREFIX=" (assoc-ref %outputs "out")))))
-    (native-inputs
-     (list clang cppcheck unzip xxd))
-    (home-page "https://github.com/ryansuchocki/microscheme/")
-    (synopsis "Scheme subset for Atmel microcontrollers")
-    (description
-     "Microscheme, or @code{(ms)} for short, is a functional programming
-language for the Arduino, and for Atmel 8-bit AVR microcontrollers in general.
-Microscheme is a subset of Scheme, in the sense that every valid @code{(ms)}
-program is also a valid Scheme program (with the exception of Arduino
-hardware-specific primitives).  The @code{(ms)} compiler performs function
-inlining, and features an aggressive tree-shaker, eliminating unused top-level
-definitions.  Microscheme has a robust @dfn{Foreign Function Interface} (FFI)
-meaning that C code may be invoked directly from (ms) programs.")
-    (license license:expat)))
-- 
2.41.0

[bug#66263] [PATCH v1 06/22] gnu: make-avr-libc: Fix synopsis.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/avr.scm (make-avr-libc/implementation): Drop 'The' from
  synopsis.

Change-Id: Idb6c008d709a988075789a6220af63f4917c2179
---
 gnu/packages/avr.scm | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index 111547ef87..c035df2b1d 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -137,7 +137,7 @@ (define* (make-avr-libc/implementation #:key (xgcc gcc))
     (native-inputs `(("avr-binutils" ,(make-avr-binutils))
                      ("avr-gcc" ,(make-avr-gcc #:xgcc xgcc))))
     (home-page "https://www.nongnu.org/avr-libc/")
-    (synopsis "The AVR C Library")
+    (synopsis "AVR C Library")
     (description
      "AVR Libc is a project whose goal is to provide a high quality C library
 for use with GCC on Atmel AVR microcontrollers.")
-- 
2.41.0

[bug#66263] [PATCH v1 07/22] gnu: cross-gcc: Enable multilib for AVR.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/build/cross-toolchain.scm (patch-multilib-shebang): New procedure.
* gnu/packages/avr.scm (make-avr-gcc): Remove uneeded phases and flags
  for multilib.
* gnu/packages/cross-base (cross-gcc-arguments) <#:configure-flags>
  [target-avr?]: Remove --disable-multilib and add --enable-multilib.

Change-Id: Id68d803057ac898f0a670f10487b08bf0891ab0b
---
 gnu/build/cross-toolchain.scm | 10 ++++++++++
 gnu/packages/avr.scm          | 13 +------------
 gnu/packages/cross-base.scm   | 16 ++++++++++++----
 3 files changed, 23 insertions(+), 16 deletions(-)

diff --git a/gnu/build/cross-toolchain.scm b/gnu/build/cross-toolchain.scm
index 9746be3e50..085b88a2c3 100644
--- a/gnu/build/cross-toolchain.scm
+++ b/gnu/build/cross-toolchain.scm
@@ -48,6 +48,14 @@ (define %gcc-cross-include-paths
   ;; Search path for target headers when cross-compiling.
   (map (cut string-append "CROSS_" <>) %gcc-include-paths))
 
+(define* (patch-genmultilib-shebang #:key inputs native-inputs #:allow-other-keys)
+  "Patch shebangs in the gcc/genmultilib file as it contains several scripts
+inside, each with a #!/bin/sh that needs patching."
+  (substitute* "gcc/genmultilib"
+    (("#!/bin/sh")
+     (string-append "#!" (assoc-ref (or native-inputs inputs) "bash")
+                    "/bin/bash"))))
+
 (define* (make-cross-binutils-visible #:key outputs inputs target
                                       #:allow-other-keys)
   "Create symlinks for 'as', 'nm', and 'ld' in the \"out\" output, under
@@ -173,6 +181,8 @@ (define* (cross-gcc-build-phases target
   "Modify PHASES to include everything needed to build a cross-GCC for TARGET,
 a target triplet."
   (modify-phases phases
+    (add-after 'unpack 'patch-genmultilib-shebang
+      patch-genmultilib-shebang)
     (add-before 'configure 'set-cross-path
       ;; This mingw32 target checking logic should match that of target-mingw?
       ;; in (guix utils), but (guix utils) is too large too copy over to the
diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index c035df2b1d..ac09b799f3 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -84,18 +84,7 @@ (define* (make-avr-gcc/implementation #:key (xgcc gcc))
                     (format #t
                             "environment variable `CPLUS_INCLUDE_PATH' \
 changed to ~a~%"
-                            (getenv "CPLUS_INCLUDE_PATH")))))
-              ;; Without a working multilib build, the resulting GCC lacks
-              ;; support for nearly every AVR chip.
-              (add-after 'unpack 'fix-genmultilib
-                (lambda _
-                  ;; patch-shebang doesn't work here because there are
-                  ;; actually several scripts inside this script, each with
-                  ;; a #!/bin/sh that needs patching.
-                  (substitute* "gcc/genmultilib"
-                    (("#!/bin/sh") (string-append "#!" (which "sh"))))))))
-         ((#:configure-flags flags)
-          #~(delete "--disable-multilib" #$flags))))
+                            (getenv "CPLUS_INCLUDE_PATH")))))))))
       (native-search-paths
        (list (search-path-specification
               (variable "CROSS_C_INCLUDE_PATH")
diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index 4b7c4b6cbe..dcb1c3efa8 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -9,6 +9,7 @@
 ;;; Copyright © 2020 Mathieu Othacehe <m.othacehe@gmail.com>
 ;;; Copyright © 2022 Maxim Cournoyer <maxim.cournoyer@gmail.com>
 ;;; Copyright © 2023 Josselin Poiret <dev@jpoiret.xyz>
+;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
 ;;;
 ;;; This file is part of GNU Guix.
 ;;;
@@ -196,12 +197,19 @@ (define (cross-gcc-arguments target xgcc libc)
                                 #~((string-append "--with-toolexeclibdir="
                                                   (assoc-ref %outputs "lib")
                                                   "/" #$target "/lib"))
+                                #~())
+
+                         #$@(if (target-avr? target)
+                                #~("--enable-multilib")
                                 #~()))
 
-                   #$(if libc
-                         flags
-                         #~(remove (cut string-match "--enable-languages.*" <>)
-                                   #$flags))))
+                   (remove
+                     (lambda (flag)
+                       (or (and #$libc
+                                (string-prefix? "--enable-languages" flag))
+                           (and #$(target-avr? target)
+                                (string=? flag "--disable-multilib"))))
+                     #$flags)))
         ((#:make-flags flags)
          (if libc
              #~(let ((libc (assoc-ref %build-inputs "libc")))
-- 
2.41.0

[bug#66263] [PATCH v1 08/22] gnu: cross-gcc: Handle target include paths.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc-search-paths): New procedure.
* gnu/packages/cross-base.scm (cross-gcc) <search-paths>: Convert to and use
  cross-gcc-search-paths procedure.

Change-Id: Id306782eaf928d05cd005b9539087ed631506b5b
---
 gnu/packages/cross-base.scm | 42 +++++++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 16 deletions(-)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index dcb1c3efa8..fe33770c2a 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -249,6 +249,31 @@ (define (cross-gcc-snippet target)
         "-DTOOLDIR_BASE_PREFIX=\\\"../../../../\\\""))
      #t))
 
+(define (cross-gcc-search-paths target)
+  "Return list of GCC search path specifications needed for TARGET."
+  (cons (search-path-specification
+          (variable "CROSS_LIBRARY_PATH")
+          (files `("lib" "lib64"
+                   ,@(list (string-append target "/lib")
+                           (string-append target "/lib64")))))
+
+        (map (lambda (variable)
+               (search-path-specification
+                 (variable variable)
+
+                 ;; Add 'include/c++' here so that <cstdlib>'s
+                 ;; "#include_next <stdlib.h>" finds GCC's
+                 ;; <stdlib.h>, not libc's.
+                 (files (match variable
+                          ("CROSS_CPLUS_INCLUDE_PATH"
+                           `("include/c++" "include"
+                             ,@(list (string-append target "/include/c++")
+                                     (string-append target "/include"))))
+                          (_
+                           `("include"
+                             ,(string-append target "/include")))))))
+             %gcc-cross-include-paths)))
+
 (define* (cross-gcc target
                     #:key
                     (xgcc %xgcc)
@@ -341,22 +366,7 @@ (define* (cross-gcc target
     (inputs '())
 
     ;; Only search target inputs, not host inputs.
-    (search-paths (cons (search-path-specification
-                         (variable "CROSS_LIBRARY_PATH")
-                         (files '("lib" "lib64")))
-                        (map (lambda (variable)
-                               (search-path-specification
-                                (variable variable)
-
-                                ;; Add 'include/c++' here so that <cstdlib>'s
-                                ;; "#include_next <stdlib.h>" finds GCC's
-                                ;; <stdlib.h>, not libc's.
-                                (files (match variable
-                                         ("CROSS_CPLUS_INCLUDE_PATH"
-                                          '("include/c++" "include"))
-                                         (_
-                                          '("include"))))))
-                             %gcc-cross-include-paths)))
+    (search-paths (cross-gcc-search-paths target))
     (native-search-paths '())))
 
 (define* (cross-kernel-headers . args)
-- 
2.41.0

[bug#66263] [PATCH v1 09/22] gnu: cross-libc: Add AVR Libc support.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/avr.scm (make-avr-libc/implementation)
  <arguments>: Add avr target parameter and disable implicit cross inputs.
  <native-inputs>: Rename avr-gcc and avr-binutils to cross-gcc
  and cross-binutils to keep consistency with gnu-build-system.
* gnu/packages/cross-base.scm (cross-libc) [target-avr?]: Return AVR
  Libc package from `make-avr-libc`.

Change-Id: I6b087946d1287a82fac61c48c513e7f2d2184794
---
 gnu/packages/avr.scm        | 21 ++++++++++++++-------
 gnu/packages/cross-base.scm |  4 ++++
 2 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/gnu/packages/avr.scm b/gnu/packages/avr.scm
index ac09b799f3..fc87e4ea13 100644
--- a/gnu/packages/avr.scm
+++ b/gnu/packages/avr.scm
@@ -40,7 +40,8 @@ (define-module (gnu packages avr)
   #:use-module (gnu packages gcc)
   #:use-module (gnu packages llvm)
   #:use-module (gnu packages vim)
-  #:export (make-avr-toolchain))
+  #:export (make-avr-libc
+            make-avr-toolchain))
 
 ;;; Commentary:
 ;;;
@@ -108,7 +109,10 @@ (define* (make-avr-gcc/implementation #:key (xgcc gcc))
 (define make-avr-gcc
   (memoize make-avr-gcc/implementation))
 
-(define* (make-avr-libc/implementation #:key (xgcc gcc))
+(define* (make-avr-libc/implementation #:key
+                                       (xbinutils (cross-binutils "avr"))
+                                       (xgcc (cross-gcc "avr"
+                                                        #:xbinutils xbinutils)))
   (package
     (name "avr-libc")
     (version "2.0.0")
@@ -121,10 +125,13 @@ (define* (make-avr-libc/implementation #:key (xgcc gcc))
                 "15svr2fx8j6prql2il2fc0ppwlv50rpmyckaxx38d3gxxv97zpdj"))))
     (build-system gnu-build-system)
     (arguments
-     '(#:out-of-source? #t
-       #:configure-flags '("--host=avr")))
-    (native-inputs `(("avr-binutils" ,(make-avr-binutils))
-                     ("avr-gcc" ,(make-avr-gcc #:xgcc xgcc))))
+     '(#:target "avr"
+       #:out-of-source? #t
+       ;; Avoid including itself as this package is a target input and cannot
+       ;; use the normal cross compilation inputs.
+       #:implicit-cross-inputs? #f))
+    (native-inputs `(("cross-binutils" ,xbinutils)
+                     ("cross-gcc" ,xgcc)))
     (home-page "https://www.nongnu.org/avr-libc/")
     (synopsis "AVR C Library")
     (description
@@ -138,7 +145,7 @@ (define make-avr-libc
 
 (define* (make-avr-toolchain/implementation #:key (xgcc gcc))
   (let ((avr-binutils (make-avr-binutils))
-        (avr-libc (make-avr-libc #:xgcc xgcc))
+        (avr-libc (make-avr-libc #:xgcc (cross-gcc "avr" #:xgcc xgcc)))
         (avr-gcc (make-avr-gcc #:xgcc xgcc)))
     ;; avr-libc checks the compiler version and passes "--enable-device-lib"
     ;; for avr-gcc > 5.1.0.  It wouldn't install the library for atmega32u4
diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index fe33770c2a..d4a0de6f90 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -28,6 +28,7 @@
 
 (define-module (gnu packages cross-base)
   #:use-module (gnu packages)
+  #:use-module (gnu packages avr)
   #:use-module (gnu packages gcc)
   #:use-module (gnu packages base)
   #:use-module (gnu packages linux)
@@ -699,6 +700,9 @@ (define* (cross-libc* target
                                 '())
                           ,@(package-inputs libc) ;FIXME: static-bash
                           ,@(package-native-inputs libc)))))
+   ((? target-avr?)
+    (make-avr-libc #:xbinutils xbinutils
+                   #:xgcc xgcc))
    (else #f)))
 
 \f
-- 
2.41.0

[bug#66263] [PATCH v1 10/22] gnu: cross-gcc: Handle AVR inputs.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc) <native-inputs> [target-avr?]:
  Add case to handle AVR.

Change-Id: I1ac38b721ed807302747cecb5fb1f6075694a01a
---
 gnu/packages/cross-base.scm | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index d4a0de6f90..5f87eec56b 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -355,6 +355,9 @@ (define* (cross-gcc target
                    ("libc" ,libc))
                  `(,@inputs
                    ("mingw-source" ,(package-source mingw-w64)))))
+            ((and libc (target-avr? target))
+             `(,@inputs
+               ("libc" ,libc)))
             (libc
              `(,@inputs
                ("libc" ,libc)
-- 
2.41.0

[bug#66263] [PATCH v1 11/22] gnu: cross-toolchain: Add set-cross-path for AVR.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/build/cross-toolchain.scm (set-cross-path/avr): New procedure.
* gnu/build/cross-toolchain.scm (cross-gcc-build-phases)
  [string-prefix? "avr"]: Return set-cross-path/avr procedure.

Signed-off-by: Jean-Pierre De Jesus DIAZ <me@jeandudey.tech>
Change-Id: I00bd39236ac2e31fef02164a7fffc8b56a166f0d
---
 gnu/build/cross-toolchain.scm | 33 ++++++++++++++++++++++++++++++---
 1 file changed, 30 insertions(+), 3 deletions(-)

diff --git a/gnu/build/cross-toolchain.scm b/gnu/build/cross-toolchain.scm
index 085b88a2c3..6f5e3b0f57 100644
--- a/gnu/build/cross-toolchain.scm
+++ b/gnu/build/cross-toolchain.scm
@@ -170,6 +170,31 @@ (define (unpacked-mingw-dir)
               (cons "LIBRARY_PATH" %gcc-include-paths))
     #t))
 
+(define* (set-cross-path/avr #:key inputs #:allow-other-keys)
+  (match (assoc-ref inputs "libc")
+    ((? string? libc)
+     (define (cross? x)
+       ;; Return #t if X is a cross-libc.
+       (string-prefix? libc x))
+
+     (let ((cpath (string-append libc "/avr/include")))
+       (for-each (cut setenv <> cpath)
+                 %gcc-cross-include-paths))
+
+     (setenv "CROSS_LIBRARY_PATH"
+             (string-append libc "/avr/lib"))
+
+     (for-each (lambda (var)
+                   (and=> (getenv var)
+                          (lambda (value)
+                            (let* ((path (search-path-as-string->list value))
+                                   (native-path (list->search-path-as-string
+                                                 (remove cross? path) ":")))
+                              (setenv var native-path)))))
+                 (cons "LIBRARY_PATH" %gcc-include-paths)))
+    ;; AVR sans-libc cross-compiler.
+    (else #t)))
+
 (define (install-strip . _)
   "Install a stripped GCC."
   ;; Unlike our 'strip' phase, this will do the right thing for
@@ -188,9 +213,11 @@ (define* (cross-gcc-build-phases target
       ;; in (guix utils), but (guix utils) is too large too copy over to the
       ;; build side entirely and for now we have no way to select variables to
       ;; copy over. See (gnu packages cross-base) for more details.
-      (if (string-suffix? "-mingw32" target)
-          (cut set-cross-path/mingw #:target target <...>)
-          set-cross-path))
+      (cond
+        ((string-suffix? "-mingw32" target)
+         (cut set-cross-path/mingw #:target target <...>))
+        ((string-prefix? "avr" target) set-cross-path/avr)
+        (#t set-cross-path)))
     (add-after 'install 'make-cross-binutils-visible
       (cut make-cross-binutils-visible #:target target <...>))
     (replace 'install install-strip)))
-- 
2.41.0

[bug#66263] [PATCH v1 12/22] gnu: cross-gcc: Find AVR Libc files.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc-arguments)
  <configure-flags>: Add --with-native-system-header-dir for AVR.
  <make-flags>: Add target prefix to /lib to find AVR library.

Change-Id: Ie9cae338da241fe987f53463aa3774a890e2af9a
---
 gnu/packages/cross-base.scm | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index 5f87eec56b..58c37e43c1 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -202,21 +202,35 @@ (define (cross-gcc-arguments target xgcc libc)
 
                          #$@(if (target-avr? target)
                                 #~("--enable-multilib")
+                                #~())
+
+
+                         #$@(if (and libc (target-avr? target))
+                                #~((string-append "--with-native-system-header-dir="
+                                                  #$libc "/" #$target "/include"))
                                 #~()))
 
                    (remove
                      (lambda (flag)
                        (or (and #$libc
                                 (string-prefix? "--enable-languages" flag))
+                           (and #$libc
+                                #$(target-avr? target)
+                                (string-prefix? "--with-native-system-header-dir"
+                                                flag))
                            (and #$(target-avr? target)
                                 (string=? flag "--disable-multilib"))))
                      #$flags)))
         ((#:make-flags flags)
          (if libc
-             #~(let ((libc (assoc-ref %build-inputs "libc")))
+             #~(let ((libc (assoc-ref %build-inputs "libc"))
+                     (lib-prefix (if #$(target-avr? target)
+                                     (string-append "/" #$target)
+                                     "")))
                 ;; FLAGS_FOR_TARGET are needed for the target libraries to receive
                 ;; the -Bxxx for the startfiles.
-                 (cons (string-append "FLAGS_FOR_TARGET=-B" libc "/lib")
+                 (cons (string-append "FLAGS_FOR_TARGET=-B"
+                                      libc lib-prefix "/lib")
                        #$flags))
              flags))
         ((#:phases phases)
-- 
2.41.0

[bug#66263] [PATCH v1 13/22] gnu: cross-gcc: Only C and C++ for AVR.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc-arguments)
  <configure-flags> [target-avr?]: Add --enable-languages=c,c++.

Change-Id: I1d63bb1b0a3074b9ff8650c5afb93777183c0ea4
---
 gnu/packages/cross-base.scm | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index 58c37e43c1..72f786dc35 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -200,13 +200,18 @@ (define (cross-gcc-arguments target xgcc libc)
                                                   "/" #$target "/lib"))
                                 #~())
 
+
                          #$@(if (target-avr? target)
                                 #~("--enable-multilib")
                                 #~())
 
 
                          #$@(if (and libc (target-avr? target))
-                                #~((string-append "--with-native-system-header-dir="
+                                #~(;; By default GCC will attemp to compile
+                                   ;; some libraries for other languages (objc,
+                                   ;; fortran) but compilation fails for AVR.
+                                   "--enable-languages=c,c++"
+                                   (string-append "--with-native-system-header-dir="
                                                   #$libc "/" #$target "/include"))
                                 #~()))
 
-- 
2.41.0

[bug#66263] [PATCH v1 14/22] guix: meson-build-system: Support AVR.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/build-system/meson.scm (make-machine-alist)
  <system> [target-avr?]: Set to none.
  <cpu_family> [target-avr?]: Set to avr.
  <cpu> [target-avr?]: Set to avr.

Change-Id: Ie47d666099c4c48edd36812f035625dccc4a3900
---
 guix/build-system/meson.scm | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/guix/build-system/meson.scm b/guix/build-system/meson.scm
index 2d14016b94..ce3362db31 100644
--- a/guix/build-system/meson.scm
+++ b/guix/build-system/meson.scm
@@ -49,11 +49,13 @@ (define (make-machine-alist triplet)
   `((system . ,(cond ((target-hurd? triplet) "gnu")
                      ((target-linux? triplet) "linux")
                      ((target-mingw? triplet) "windows")
+                     ((target-avr? triplet) "none")
                      (#t (error "meson: unknown operating system"))))
     (cpu_family . ,(cond ((target-x86-32? triplet) "x86")
                          ((target-x86-64? triplet) "x86_64")
                          ((target-arm32? triplet) "arm")
                          ((target-aarch64? triplet) "aarch64")
+                         ((target-avrch64? triplet) "avr")
                          ((target-mips64el? triplet) "mips64")
                          ((target-powerpc? triplet)
                           (if (target-64bit? triplet)
@@ -66,6 +68,7 @@ (define (make-machine-alist triplet)
                   ((target-x86-64? triplet) "x86_64")
                   ((target-aarch64? triplet) "armv8-a")
                   ((target-arm32? triplet) "armv7")
+                  ((target-avr? triplet) "avr")
                   ;; According to #mesonbuild on OFTC, there does not appear
                   ;; to be an official-ish list of CPU types recognised by
                   ;; Meson, the "cpu" field is not used by Meson itself and
-- 
2.41.0

[bug#66263] [PATCH v1 15/22] guix: meson-build-system: Disable PIC for AVR.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* guix/build-system/meson.scm (make-built-in-options-alist): New procedure.
* guix/build-system/meson.scm (make-cross-file): Add 'built-in options'
  section to cross file.

Change-Id: Ifff7f6fb1eb8b0e8ddd04881d22acb863c9e85b2
---
 guix/build-system/meson.scm | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/guix/build-system/meson.scm b/guix/build-system/meson.scm
index ce3362db31..c30c2000b4 100644
--- a/guix/build-system/meson.scm
+++ b/guix/build-system/meson.scm
@@ -92,6 +92,13 @@ (define (make-binaries-alist triplet)
     (ld . ,(string-append triplet "-ld"))
     (strip . ,(string-append triplet "-strip"))))
 
+(define (make-built-in-options-alist triplet)
+  (if (target-avr? triplet)
+      `((b_pie . #f)
+        (b_staticpic . #f)
+        (default_library . "static"))
+       '()))
+
 (define (make-cross-file triplet)
   (computed-file "cross-file"
     (with-imported-modules '((guix build meson-configuration))
@@ -102,7 +109,9 @@ (define (make-cross-file triplet)
               (write-section-header port "host_machine")
               (write-assignments port '#$(make-machine-alist triplet))
               (write-section-header port "binaries")
-              (write-assignments port '#$(make-binaries-alist triplet))))))))
+              (write-assignments port '#$(make-binaries-alist triplet))
+              (write-section-header port "built-in options")
+              (write-assignments port '#$(make-built-in-options-alist triplet))))))))
 
 (define %meson-build-system-modules
   ;; Build-side modules imported by default.
-- 
2.41.0

[bug#66263] [PATCH v1 16/22] gnu: Add cross-gcc-toolchain procedure.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-base.scm (cross-gcc-toolchain/implementation): New procedure.
* gnu/packages/cross-base.scm (cross-gcc-toolchain): New procedure.

Change-Id: I994067eac094d0a50a7399e61bda944eded9187f
---
 gnu/packages/cross-base.scm | 51 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

diff --git a/gnu/packages/cross-base.scm b/gnu/packages/cross-base.scm
index 72f786dc35..0a8a0bb95c 100644
--- a/gnu/packages/cross-base.scm
+++ b/gnu/packages/cross-base.scm
@@ -34,6 +34,7 @@ (define-module (gnu packages cross-base)
   #:use-module (gnu packages linux)
   #:use-module (gnu packages hurd)
   #:use-module (gnu packages mingw)
+  #:use-module (guix memoization)
   #:use-module (guix platform)
   #:use-module (guix packages)
   #:use-module (guix diagnostics)
@@ -41,6 +42,7 @@ (define-module (gnu packages cross-base)
   #:use-module (guix i18n)
   #:use-module (guix utils)
   #:use-module (guix build-system gnu)
+  #:use-module (guix build-system trivial)
   #:use-module (guix gexp)
   #:use-module (srfi srfi-1)
   #:use-module (srfi srfi-26)
@@ -50,7 +52,8 @@ (define-module (gnu packages cross-base)
             cross-libc
             cross-gcc
             cross-mig
-            cross-kernel-headers))
+            cross-kernel-headers
+            cross-gcc-toolchain))
 
 (define-syntax %xgcc
   ;; GCC package used as the basis for cross-compilation.  It doesn't have to
@@ -727,6 +730,52 @@ (define* (cross-libc* target
                    #:xgcc xgcc))
    (else #f)))
 
+(define* (cross-gcc-toolchain/implementation target
+                                             #:key
+                                             (base-gcc %xgcc)
+                                             (xbinutils (cross-binutils target))
+                                             (libc (cross-libc
+                                                     target
+                                                     #:xgcc (cross-gcc target #:xgcc base-gcc)
+                                                     #:xbinutils xbinutils))
+                                             (xgcc (cross-gcc target
+                                                              #:xgcc base-gcc
+                                                              #:libc libc
+                                                              #:xbinutils xbinutils)))
+  "Returns PACKAGE that contains a cross-compilation tool chain for TARGET
+with XBINUTILS, XGCC and LIBC (if exists for TARGET)."
+  (package
+    (name (string-append (package-name xgcc) "-toolchain"))
+    (version (package-version xgcc))
+    (source #f)
+    (build-system trivial-build-system)
+    (arguments
+     (list #:modules '((guix build union))
+           #:builder
+           #~(begin
+               (use-modules (ice-9 match)
+                            (guix build union))
+
+               (match %build-inputs
+                 (((names . directory) ...)
+                  (union-build #$output directory))))))
+    (inputs `(,xbinutils ,xgcc ,@(if libc (list libc) '())))
+    (home-page (package-home-page xgcc))
+    (synopsis
+     (format #f "Complete GCC tool chain for C/C++ development (~a)" target))
+    (description "This package provides a complete GCC cross toolchain for
+C/C++ development to be installed in user profiles.  This includes GCC, as
+well as libc (headers and binariesl), and Binutils.  GCC is the GNU Compiler
+Collection.")
+    (license (delete-duplicates `(,(package-license xgcc)
+                                  ,(package-license xbinutils)
+                                  ,@(if libc
+                                        (list (package-license libc))
+                                        '()))))))
+
+(define cross-gcc-toolchain
+  (memoize cross-gcc-toolchain/implementation))
+
 \f
 ;;; Concrete cross tool chains are instantiated like this:
 ;;
-- 
2.41.0

[bug#66263] [PATCH v1 17/22] gnu: Add gcc-cross-avr-toolchain.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/local.mk (GNU_SYSTEM_MODULES): Add cross-toolchain.scm.
* gnu/packages/cross-toolchain.scm (gcc-cross-avr-toolchain): New variable.

Change-Id: Ie768d5cc0663dd57753af1d4ac631b3cafbf9e8c
---
 gnu/local.mk                     |  1 +
 gnu/packages/cross-toolchain.scm | 36 ++++++++++++++++++++++++++++++++
 2 files changed, 37 insertions(+)
 create mode 100644 gnu/packages/cross-toolchain.scm

diff --git a/gnu/local.mk b/gnu/local.mk
index a8142bb0f2..1360548e69 100644
--- a/gnu/local.mk
+++ b/gnu/local.mk
@@ -201,6 +201,7 @@ GNU_SYSTEM_MODULES =				\
   %D%/packages/crates-graphics.scm		\
   %D%/packages/crates-gtk.scm			\
   %D%/packages/cross-base.scm			\
+  %D%/packages/cross-toolchain.scm			\
   %D%/packages/crypto.scm			\
   %D%/packages/cryptsetup.scm			\
   %D%/packages/cups.scm				\
diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
new file mode 100644
index 0000000000..08511a7c00
--- /dev/null
+++ b/gnu/packages/cross-toolchain.scm
@@ -0,0 +1,36 @@
+;;; GNU Guix --- Functional package management for GNU
+;;; Copyright © 2023 Foundation Devices, Inc. <hello@foundationdevices.com>
+;;;
+;;; This file is part of GNU Guix.
+;;;
+;;; GNU Guix is free software; you can redistribute it and/or modify it
+;;; under the terms of the GNU General Public License as published by
+;;; the Free Software Foundation; either version 3 of the License, or (at
+;;; your option) any later version.
+;;;
+;;; GNU Guix is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+;;; GNU General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU General Public License
+;;; along with GNU Guix.  If not, see <http://www.gnu.org/licenses/>.
+
+(define-module (gnu packages cross-toolchain)
+  #:use-module (gnu packages cross-base)
+  #:use-module (guix packages))
+
+;;; Commentary:
+;;;
+;;; This module provides packages for cross compilation toolchains.  These
+;;; packages must not be used at the top level to avoid cyclic module
+;;; dependencies caused by the (gnu packages cross-base) module referring to
+;;; to top level bindings from (gnu packages gcc).
+;;;
+;;; The real purpose of these packages is for installation on profiles by users
+;;; and other packages should make use of the toolchain through the usual cross
+;;; compilation methods. For example, by using the `#:target' argument on
+;;; packages or `--target' on the command line.
+
+(define-public gcc-cross-avr-toolchain
+  (cross-gcc-toolchain "avr"))
-- 
2.41.0

[bug#66263] [PATCH v1 18/22] gnu: make-ergodox-firmware: Use AVR target.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/firmware.scm (make-ergodox-firmware/implementation):
  Use `#:target "avr"` keyword argument instead of using `make-avr-toolchain`.

Change-Id: I4345a55d5dbd436d524de4886969b3332c6288a9
---
 gnu/packages/firmware.scm | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/gnu/packages/firmware.scm b/gnu/packages/firmware.scm
index 294bbea184..58253b93a7 100644
--- a/gnu/packages/firmware.scm
+++ b/gnu/packages/firmware.scm
@@ -1256,6 +1256,7 @@ (define* (make-ergodox-firmware/implementation layout #:key override.c
       (arguments
        (list
         #:tests? #f                   ;no test suite
+        #:target "avr"
         #:make-flags
         #~(list (string-append "LAYOUT=" #$layout)
                 ;; Simplify the output directory name.
@@ -1281,7 +1282,7 @@ (define* (make-ergodox-firmware/implementation layout #:key override.c
                   (install-file "firmware.hex" #$output)
                   (install-file "firmware.eep" #$output)
                   (install-file "firmware--layout.html" #$output)))))))
-      (native-inputs (list (make-avr-toolchain) python))
+      (native-inputs (list python))
       (home-page "https://www.ergodox.io")
       (synopsis "Firmware for the ErgoDox keyboard")
       (description (format #f "This package contains the original firmware for
-- 
2.41.0

[bug#66263] [PATCH v1 19/22] gnu: make-qmk-firmware: Use AVR target.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/firmware.scm (qmk) <inputs>: Remove AVR toolchain.
* gnu/packages/firmware.scm (make-qmk-firmware/implementation):
  Use `#:target "avr"` keyword argument as qmk does not provide the
  toolchain.

Change-Id: Ibe09f6ef3c555052faf2c5c243303d85675866be
---
 gnu/packages/firmware.scm | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/gnu/packages/firmware.scm b/gnu/packages/firmware.scm
index 58253b93a7..06abfcec71 100644
--- a/gnu/packages/firmware.scm
+++ b/gnu/packages/firmware.scm
@@ -1344,9 +1344,7 @@ (define-public qmk
                 `("PATH" prefix
                   ,(map (compose dirname
                                  (cut search-input-file inputs <>))
-                        '("bin/avr-ar"
-                          "bin/avr-gcc"
-                          "bin/avrdude"
+                        '("bin/avrdude"
                           "bin/awk"
                           "bin/cmp"
                           "bin/dfu-programmer"
@@ -1359,16 +1357,13 @@ (define-public qmk
                           ;; TODO: Remove after git is wrapped with these.
                           "bin/basename"
                           "bin/sed"
-                          "bin/uname")))
-                `("CROSS_C_INCLUDE_PATH" = (,(getenv "CROSS_C_INCLUDE_PATH")))
-                `("CROSS_LIBRARY_PATH" = (,(getenv "CROSS_LIBRARY_PATH")))))))))
+                          "bin/uname")))))))))
     ;; The inputs are not propagated since qmk is to be used strictly as a
     ;; command.
     (inputs
      ;; The 'qmk setup' command advises to use GCC at version 8, and there are
      ;; compilation errors in some firmware otherwise.
-     (list (make-avr-toolchain #:xgcc gcc-8)
-           avrdude
+     (list avrdude
            bash-minimal
            dfu-programmer
            dfu-util
@@ -1441,6 +1436,7 @@ (define* (make-qmk-firmware/implementation keyboard keymap
                   (ice-9 ftw)
                   (ice-9 match)
                   (srfi srfi-26))
+      #:target "avr"
       ;; XXX: Running a test target like "test:$keyboard" doesn't seem to run
       ;; anything and causes the .hex file to be regenerated; leave the tests
       ;; out for now.
-- 
2.41.0

[bug#66263] [PATCH v1 20/22] gnu: lufa: Use AVR target.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/avr-xyz.scm (lufa): Remove AVR toolchain from inputs and
  use `#:target "avr"` keyword argument instead.

Change-Id: I792132a9211b1aa64283f9b4e76a4dd57e86646d
---
 gnu/packages/avr-xyz.scm | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/gnu/packages/avr-xyz.scm b/gnu/packages/avr-xyz.scm
index cc34189841..b14a0e7dfe 100644
--- a/gnu/packages/avr-xyz.scm
+++ b/gnu/packages/avr-xyz.scm
@@ -122,6 +122,7 @@ (define-public lufa
      ;; only built).
      (list
       #:tests? #f
+      #:target "avr"
       #:modules '((guix build gnu-build-system)
                   (guix build utils)
                   (ice-9 match)
@@ -172,7 +173,7 @@ (define-public lufa
                               (mkdir-p dest)
                               (copy-recursively html dest)))
                           html-dirs)))))))
-    (native-inputs (list doxygen (make-avr-toolchain)))
+    (native-inputs (list doxygen))
     (home-page "https://www.lufa-lib.org/")
     (synopsis "Lightweight USB Framework for AVRs")
     (description "UFA is a simple to use, lightweight framework which sits
-- 
2.41.0

[bug#66263] [PATCH v1 21/22] gnu: Add gcc-cross-i686-w64-mingw32-toolchain.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-toolchain.scm (gcc-cross-i686-w64-mingw32-toolchain): New variable.

Change-Id: I5d6056fc4943acae03aeaafa587f40ced182b1d4
---
 gnu/packages/cross-toolchain.scm | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
index 08511a7c00..4c212bdce5 100644
--- a/gnu/packages/cross-toolchain.scm
+++ b/gnu/packages/cross-toolchain.scm
@@ -34,3 +34,6 @@ (define-module (gnu packages cross-toolchain)
 
 (define-public gcc-cross-avr-toolchain
   (cross-gcc-toolchain "avr"))
+
+(define-public gcc-cross-i686-w64-mingw32-toolchain
+  (cross-gcc-toolchain "i686-w64-mingw32"))
-- 
2.41.0

[bug#66263] [PATCH v1 22/22] gnu: Add gcc-cross-x86_64-w64-mingw32-toolchain.

[Jean-Pierre De Jesus DIAZ via Guix-patches via]

* gnu/packages/cross-toolchain.scm (gcc-cross-x86_64-w64-mingw32-toolchain): New variable.

Change-Id: I94802e5e7cb218d7afb0ee09871125bae5db933c
---
 gnu/packages/cross-toolchain.scm | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/gnu/packages/cross-toolchain.scm b/gnu/packages/cross-toolchain.scm
index 4c212bdce5..ab071e1005 100644
--- a/gnu/packages/cross-toolchain.scm
+++ b/gnu/packages/cross-toolchain.scm
@@ -37,3 +37,6 @@ (define-public gcc-cross-avr-toolchain
 
 (define-public gcc-cross-i686-w64-mingw32-toolchain
   (cross-gcc-toolchain "i686-w64-mingw32"))
+
+(define-public gcc-cross-x86_64-w64-mingw32-toolchain
+  (cross-gcc-toolchain "x86_64-w64-mingw32"))
-- 
2.41.0

[bug#66263] Updated patch series.

[Jean-Pierre De Jesus Diaz via Guix-patches via]

Hello,

I've sent an updated revision of the changes, now adding
the MinGW toolchain targets and also changing the Ergodox
and QMK firmwares to use #:target "avr" for cross-compilation,
so it removes make-avr-toolchain from `qmk` inputs as packages
should use #:target "avr" or in user profiles cases they can install
the toolchain from the packages in cross-toolchain.scm.

The QMK package warns about the firmware not compiling with
GCC 8+ but it seems to be working right now with the default
GCC used in Guix, so maybe it'd be to tie the package to the
default GCC version as IIRC there's no way to pass a custom base
GCC version when using #:target means of cross compilation.

I've also moved the toolchain procedure to cross-base.scm and
memoized it.

-- 
Jean-Pierre De Jesus DIAZ
Foundation Devices

[bug#66263] [PATCH 00/23] guix: Add avr as a platform.

[Ludovic Courtès]

Hi,

Maxim Cournoyer <maxim.cournoyer@gmail.com> skribis:

> Mathieu Othacehe <othacehe@gnu.org> writes:
>
>> Hello,
>>
>>> The [PATCH 21/23] fixes a bug in the meson-configuration module
>>> and can be applied independently.
>>
>> I applied this one. Now the rest of the series also seems fine to me.
>> Maxim, Efraim, Vagrant any thoughts?
>
> I've reviewed the series, thanks for the ping.  It seems it'll need to
> be rebased on master as some of the changes conflict with turning the
> previous avr-toolchain and friends into procedure that was merged
> perhaps a week ago.

Just a heads-up for you embedded team :-) : Jean-Pierre sent an updated
version last week.

Ludo’.

bug#66263: Updated patch series.

[Efraim Flashner]

[-- Attachment #1: Type: text/plain, Size: 1247 bytes --]

On Tue, Nov 28, 2023 at 11:50:50AM +0000, Jean-Pierre De Jesus Diaz via Guix-patches via wrote:
> Hello,
> 
> I've sent an updated revision of the changes, now adding
> the MinGW toolchain targets and also changing the Ergodox
> and QMK firmwares to use #:target "avr" for cross-compilation,
> so it removes make-avr-toolchain from `qmk` inputs as packages
> should use #:target "avr" or in user profiles cases they can install
> the toolchain from the packages in cross-toolchain.scm.
> 
> The QMK package warns about the firmware not compiling with
> GCC 8+ but it seems to be working right now with the default
> GCC used in Guix, so maybe it'd be to tie the package to the
> default GCC version as IIRC there's no way to pass a custom base
> GCC version when using #:target means of cross compilation.
> 
> I've also moved the toolchain procedure to cross-base.scm and
> memoized it.

Wow! Thank you for all the work on this.

Patches slightly modified (indentation, wording on commit messages) and
pushed!

-- 
Efraim Flashner   <efraim@flashner.co.il>   רנשלפ םירפא
GPG key = A28B F40C 3E55 1372 662D  14F7 41AA E7DC CA3D 8351
Confidentiality cannot be guaranteed on emails sent or received unencrypted

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[bug#66263] Updated patch series.

[Jean-Pierre De Jesus Diaz via Guix-patches via]

Hi!

Thanks for pushing these changes! Hope to help around more in embedded
target areas,
and sorry for the issues on indentation and commit messages.

Cheers!

On Mon, Dec 11, 2023 at 11:58 AM Efraim Flashner <efraim@flashner.co.il> wrote:
>
> On Tue, Nov 28, 2023 at 11:50:50AM +0000, Jean-Pierre De Jesus Diaz via Guix-patches via wrote:
> > Hello,
> >
> > I've sent an updated revision of the changes, now adding
> > the MinGW toolchain targets and also changing the Ergodox
> > and QMK firmwares to use #:target "avr" for cross-compilation,
> > so it removes make-avr-toolchain from `qmk` inputs as packages
> > should use #:target "avr" or in user profiles cases they can install
> > the toolchain from the packages in cross-toolchain.scm.
> >
> > The QMK package warns about the firmware not compiling with
> > GCC 8+ but it seems to be working right now with the default
> > GCC used in Guix, so maybe it'd be to tie the package to the
> > default GCC version as IIRC there's no way to pass a custom base
> > GCC version when using #:target means of cross compilation.
> >
> > I've also moved the toolchain procedure to cross-base.scm and
> > memoized it.
>
> Wow! Thank you for all the work on this.
>
> Patches slightly modified (indentation, wording on commit messages) and
> pushed!
>
> --
> Efraim Flashner   <efraim@flashner.co.il>   רנשלפ םירפא
> GPG key = A28B F40C 3E55 1372 662D  14F7 41AA E7DC CA3D 8351
> Confidentiality cannot be guaranteed on emails sent or received unencrypted



-- 
Jean-Pierre De Jesus DIAZ
Foundation Devices, Inc.