* bug#37128: guix system reconfigure stops output after "Evaluating user expression..."
@ 2019-08-21 13:13 Pierre Neidhardt
2019-08-28 20:42 ` Ludovic Courtès
0 siblings, 1 reply; 10+ messages in thread
From: Pierre Neidhardt @ 2019-08-21 13:13 UTC (permalink / raw)
To: 37128
[-- Attachment #1: Type: text/plain, Size: 848 bytes --]
After a guix pull on 0fc235a, guix system reconfigure stop at
--8<---------------cut here---------------start------------->8---
shepherd: Evaluating user expression (let* ((services (map primitive-load (?))) # ?) ?).
--8<---------------cut here---------------end--------------->8---
instead of
--8<---------------cut here---------------start------------->8---
shepherd: Evaluating user expression (let* ((services (map primitive-load (?))) # ?) ?).
shepherd: Service user-homes has been started.
shepherd: Service term-auto could not be started.
bootloader successfully installed on '/dev/sda’
--8<---------------cut here---------------end--------------->8---
The only change I've done to my config.scm is that now I have a btrfs
filesystem (just for storage, it's not /home).
--
Pierre Neidhardt
https://ambrevar.xyz/
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 487 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37128: guix system reconfigure stops output after "Evaluating user expression..."
2019-08-21 13:13 bug#37128: guix system reconfigure stops output after "Evaluating user expression..." Pierre Neidhardt
@ 2019-08-28 20:42 ` Ludovic Courtès
2019-08-29 7:23 ` Pierre Neidhardt
0 siblings, 1 reply; 10+ messages in thread
From: Ludovic Courtès @ 2019-08-28 20:42 UTC (permalink / raw)
To: Pierre Neidhardt; +Cc: 37128
Hello,
Pierre Neidhardt <mail@ambrevar.xyz> skribis:
> After a guix pull on 0fc235a, guix system reconfigure stop at
>
> shepherd: Evaluating user expression (let* ((services (map primitive-load (?))) # ?) ?).
>
>
> instead of
>
> shepherd: Evaluating user expression (let* ((services (map primitive-load (?))) # ?) ?).
> shepherd: Service user-homes has been started.
> shepherd: Service term-auto could not be started.
> bootloader successfully installed on '/dev/sda’
>
> The only change I've done to my config.scm is that now I have a btrfs
> filesystem (just for storage, it's not /home).
The “Evaluating user expression” started the ‘file-system’ service for
this btrfs file system, and it got stuck for some reason. Did
/var/log/messages or the console show anything?
I suppose you’d have to try again the experiment. Presumably there’s
some fsck-like process or something taking time or waiting for input.
Ludo’.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37128: guix system reconfigure stops output after "Evaluating user expression..."
2019-08-28 20:42 ` Ludovic Courtès
@ 2019-08-29 7:23 ` Pierre Neidhardt
2019-08-29 12:41 ` Ludovic Courtès
0 siblings, 1 reply; 10+ messages in thread
From: Pierre Neidhardt @ 2019-08-29 7:23 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 37128
[-- Attachment #1: Type: text/plain, Size: 716 bytes --]
This is the last message in /var/log/messages:
--8<---------------cut here---------------start------------->8---
Aug 29 09:13:40 localhost shepherd[1]: Evaluating user expression (let* ((services (map primitive-load (?))) # ?) ?).
--8<---------------cut here---------------end--------------->8---
> Did
> /var/log/messages or the console show anything?
What console?
> I suppose you’d have to try again the experiment. Presumably there’s
> some fsck-like process or something taking time or waiting for input.
Note that everything works alright. But I'm worried that this would
fail on a new installation where the bootloader is missing :(
--
Pierre Neidhardt
https://ambrevar.xyz/
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 487 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37128: guix system reconfigure stops output after "Evaluating user expression..."
2019-08-29 7:23 ` Pierre Neidhardt
@ 2019-08-29 12:41 ` Ludovic Courtès
2019-08-29 13:25 ` Pierre Neidhardt
2019-08-29 22:53 ` Bengt Richter
0 siblings, 2 replies; 10+ messages in thread
From: Ludovic Courtès @ 2019-08-29 12:41 UTC (permalink / raw)
To: Pierre Neidhardt; +Cc: 37128
Pierre Neidhardt <mail@ambrevar.xyz> skribis:
> This is the last message in /var/log/messages:
>
> Aug 29 09:13:40 localhost shepherd[1]: Evaluating user expression (let* ((services (map primitive-load (?))) # ?) ?).
>
>> Did
>> /var/log/messages or the console show anything?
>
> What console?
/dev/console, so tty1, typically.
>> I suppose you’d have to try again the experiment. Presumably there’s
>> some fsck-like process or something taking time or waiting for input.
>
> Note that everything works alright. But I'm worried that this would
> fail on a new installation where the bootloader is missing :(
Where the bootloader is missing? The bootloader cannot be missing or
the thing is not installed. :-)
Ludo’.
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37128: guix system reconfigure stops output after "Evaluating user expression..."
2019-08-29 12:41 ` Ludovic Courtès
@ 2019-08-29 13:25 ` Pierre Neidhardt
2019-08-30 9:56 ` Pierre Neidhardt
2019-08-29 22:53 ` Bengt Richter
1 sibling, 1 reply; 10+ messages in thread
From: Pierre Neidhardt @ 2019-08-29 13:25 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: 37128
[-- Attachment #1: Type: text/plain, Size: 460 bytes --]
Ludovic Courtès <ludo@gnu.org> writes:
> Where the bootloader is missing? The bootloader cannot be missing or
> the thing is not installed. :-)
No it's not missing, but I think the bootloader remained from the
previous working configs (before I configured the Btrfs file system).
Say I'd wipe the bootloader now and re-run `guix system reconfigure...',
I don't think it would get installed then.
--
Pierre Neidhardt
https://ambrevar.xyz/
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 487 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37128: guix system reconfigure stops output after "Evaluating user expression..."
2019-08-29 12:41 ` Ludovic Courtès
2019-08-29 13:25 ` Pierre Neidhardt
@ 2019-08-29 22:53 ` Bengt Richter
2019-08-29 23:27 ` Ludovic Courtès
1 sibling, 1 reply; 10+ messages in thread
From: Bengt Richter @ 2019-08-29 22:53 UTC (permalink / raw)
To: Ludovic Courtès; +Cc: Pierre Neidhardt, 37128
On +2019-08-29 14:41:51 +0200, Ludovic Courtès wrote:
> Pierre Neidhardt <mail@ambrevar.xyz> skribis:
>
> > This is the last message in /var/log/messages:
> >
> > Aug 29 09:13:40 localhost shepherd[1]: Evaluating user expression (let* ((services (map primitive-load (?))) # ?) ?).
> >
> >> Did
> >> /var/log/messages or the console show anything?
> >
> > What console?
>
> /dev/console, so tty1, typically.
>
> >> I suppose you’d have to try again the experiment. Presumably there’s
> >> some fsck-like process or something taking time or waiting for input.
> >
> > Note that everything works alright. But I'm worried that this would
> > fail on a new installation where the bootloader is missing :(
>
> Where the bootloader is missing? The bootloader cannot be missing or
> the thing is not installed. :-)
>
> Ludo’.
>
Had you considered the case where someone[1] is running a binary install
on a foreign distro booted by refind or a bootloader not in your official list?
[1] guess who ;-)
Regards,
Bengt Richter
^ permalink raw reply [flat|nested] 10+ messages in thread
* bug#37128: guix system reconfigure stops output after "Evaluating user expression..."
2019-08-29 22:53 ` Bengt Richter
@ 2019-08-29 23:27 ` Ludovic Courtès
0 siblings, 0 replies; 10+ messages in thread
From: Ludovic Courtès @ 2019-08-29 23:27 UTC (permalink / raw)
To: Bengt Richter; +Cc: Pierre Neidhardt, 37128
Hi Bengt,
Bengt Richter <bokr@bokr.com> skribis:
> On +2019-08-29 14:41:51 +0200, Ludovic Courtès wrote:
>> Pierre Neidhardt <mail@ambrevar.xyz> skribis:
[...]
>> > Note that everything works alright. But I'm worried that this would
>> > fail on a new installation where the bootloader is missing :(
>>
>> Where the bootloader is missing? The bootloader cannot be missing or
>> the thing is not installed. :-)
>>
>> Ludo’.
>>
>
> Had you considered the case where someone[1] is running a binary install
> on a foreign distro booted by refind or a bootloader not in your official list?
I hadn’t! If that’s the case, it’ll be more difficult for us to support
that someone. :-)
Ludo’.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-09-22 16:14 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-08-21 13:13 bug#37128: guix system reconfigure stops output after "Evaluating user expression..." Pierre Neidhardt
2019-08-28 20:42 ` Ludovic Courtès
2019-08-29 7:23 ` Pierre Neidhardt
2019-08-29 12:41 ` Ludovic Courtès
2019-08-29 13:25 ` Pierre Neidhardt
2019-08-30 9:56 ` Pierre Neidhardt
2019-08-30 21:55 ` Jakob L. Kreuze
2019-09-22 16:13 ` Pierre Neidhardt
2019-08-29 22:53 ` Bengt Richter
2019-08-29 23:27 ` Ludovic Courtès
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.