* bug#37492: GUIXSD 1.0.1 install error
@ 2019-09-23 17:21 RAUL H C LOPES
2019-09-23 21:52 ` RAUL H C LOPES
0 siblings, 1 reply; 9+ messages in thread
From: RAUL H C LOPES @ 2019-09-23 17:21 UTC (permalink / raw)
To: 37492
Hi,
I am trying to install GUIX SD and getting an error 1a6a140 "Unable to
to locate keymap update file". I am trying to install UK English, UK
keyb with Win keys: .
(locale "en_GB.utf8")
Showing in the configuration config.scm
Regards, Raul
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#37492: GUIXSD 1.0.1 install error
2019-09-23 17:21 bug#37492: GUIXSD 1.0.1 install error RAUL H C LOPES
@ 2019-09-23 21:52 ` RAUL H C LOPES
2019-09-27 21:08 ` Marius Bakke
0 siblings, 1 reply; 9+ messages in thread
From: RAUL H C LOPES @ 2019-09-23 21:52 UTC (permalink / raw)
To: 37492
Hi,
I've emailed a few hours ago about an error in the GUIXSD installer. It
might be relevant that I was doing encrypted home and root. Very likely
unconnected.
I've just tried a new install without encryption. A new failure:
.../grub-install- error: efibootmgr failed to register the boot
entry: Input/output error.
Regards, Raul
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#37492: GUIXSD 1.0.1 install error
2019-09-23 21:52 ` RAUL H C LOPES
@ 2019-09-27 21:08 ` Marius Bakke
2019-09-27 22:50 ` RAUL H C LOPES
0 siblings, 1 reply; 9+ messages in thread
From: Marius Bakke @ 2019-09-27 21:08 UTC (permalink / raw)
To: RAUL H C LOPES, 37492
[-- Attachment #1: Type: text/plain, Size: 744 bytes --]
Hello Raul,
RAUL H C LOPES <rlopes@cern.ch> writes:
> Hi,
>
>
> I've emailed a few hours ago about an error in the GUIXSD installer. It
> might be relevant that I was doing encrypted home and root. Very likely
> unconnected.
>
>
> I've just tried a new install without encryption. A new failure:
>
> .../grub-install- error: efibootmgr failed to register the boot
> entry: Input/output error.
This means that GRUB failed to update the UEFI variables on your system.
Are you using the generated configuration file or a custom one?
The most likely reason for this error is that you are using
'grub-efi-bootloader' on a non-EFI system. Changing to
'grub-bootloader' should solve it in that case.
HTH,
Marius
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 487 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#37492: GUIXSD 1.0.1 install error
2019-09-27 21:08 ` Marius Bakke
@ 2019-09-27 22:50 ` RAUL H C LOPES
2019-09-29 12:00 ` Marius Bakke
0 siblings, 1 reply; 9+ messages in thread
From: RAUL H C LOPES @ 2019-09-27 22:50 UTC (permalink / raw)
To: Marius Bakke, 37492
Hi Marius,
I've managed to install GuixSD by chossing msdos instead of gpt.
Coincidence? Is the gpt setup tested?
I've running the system for a few days.
I need now a good manual> I'm suffering for:
- reconfigure stuff that is usually in /etc, like /etc/ssh/sshd_config;
- running a make on an open source project who looks for linux libs
where debian would find them.
Regards, Raul
On 27/09/2019 22:08, Marius Bakke wrote:
> Hello Raul,
>
> RAUL H C LOPES <rlopes@cern.ch> writes:
>
>> Hi,
>>
>>
>> I've emailed a few hours ago about an error in the GUIXSD installer. It
>> might be relevant that I was doing encrypted home and root. Very likely
>> unconnected.
>>
>>
>> I've just tried a new install without encryption. A new failure:
>>
>> .../grub-install- error: efibootmgr failed to register the boot
>> entry: Input/output error.
> This means that GRUB failed to update the UEFI variables on your system.
> Are you using the generated configuration file or a custom one?
>
> The most likely reason for this error is that you are using
> 'grub-efi-bootloader' on a non-EFI system. Changing to
> 'grub-bootloader' should solve it in that case.
>
> HTH,
> Marius
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#37492: GUIXSD 1.0.1 install error
2019-09-27 22:50 ` RAUL H C LOPES
@ 2019-09-29 12:00 ` Marius Bakke
2019-10-03 21:46 ` RAUL H C LOPES
2019-10-17 11:26 ` RAUL H C LOPES
0 siblings, 2 replies; 9+ messages in thread
From: Marius Bakke @ 2019-09-29 12:00 UTC (permalink / raw)
To: RAUL H C LOPES, 37492
[-- Attachment #1: Type: text/plain, Size: 875 bytes --]
RAUL H C LOPES <rlopes@cern.ch> writes:
> Hi Marius,
>
> I've managed to install GuixSD by chossing msdos instead of gpt.
> Coincidence? Is the gpt setup tested?
Can you share the steps required to reproduce the error?
> I've running the system for a few days.
>
> I need now a good manual> I'm suffering for:
> - reconfigure stuff that is usually in /etc, like /etc/ssh/sshd_config;
There is a good up-to-date manual here:
<https://guix.gnu.org/manual/devel>. Search for 'openssh-configuration'
for examples on how to configure the SSH daemon.
> - running a make on an open source project who looks for linux libs
> where debian would find them.
Typically you would do something like `guix environment --ad-hoc
gcc-toolchain make` to enter a shell environment where all the
dependencies of the program you want to build are present.
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 487 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#37492: GUIXSD 1.0.1 install error
2019-09-29 12:00 ` Marius Bakke
@ 2019-10-03 21:46 ` RAUL H C LOPES
2019-10-17 11:26 ` RAUL H C LOPES
1 sibling, 0 replies; 9+ messages in thread
From: RAUL H C LOPES @ 2019-10-03 21:46 UTC (permalink / raw)
To: Marius Bakke, 37492
On 29/09/2019 13:00, Marius Bakke wrote:
> RAUL H C LOPES <rlopes@cern.ch> writes:
>
>> Hi Marius,
>>
>> I've managed to install GuixSD by chossing msdos instead of gpt.
>> Coincidence? Is the gpt setup tested?
> Can you share the steps required to reproduce the error?
I don't have logs for the crash. Unfortuately, my first time with GuixSD
and I just went along with Graphic install. How could I have collected
them?
Anyway, my memory log:
# install 0:
Home in separate partition, both encrypted; gpt label.
That's error I submitted.
# install 1
one partition, encrypted; gpt label.
a crash during package install.
# install 2
Guided partioning, no encryption, gpt label.
Same sort of crash at another point.
The crashes happened at different packages. I assumed it was something
related with disk I/O.
# install 3
Guided one partition, no encryption, label msdos.
It worked fine.
I am doing a new install tomorrow on a Supermicro SYS-E2000-8D. It has 2
10G NIcs. I hope Guix has got the drivers.
>
>> I've running the system for a few days.
>>
>> I need now a good manual> I'm suffering for:
>> - reconfigure stuff that is usually in /etc, like /etc/ssh/sshd_config;
> There is a good up-to-date manual here:
> <https://guix.gnu.org/manual/devel>. Search for 'openssh-configuration'
> for examples on how to configure the SSH daemon.
>
>> - running a make on an open source project who looks for linux libs
>> where debian would find them.
> Typically you would do something like `guix environment --ad-hoc
> gcc-toolchain make` to enter a shell environment where all the
> dependencies of the program you want to build are present.
Great! thanks for the link and hint on gcc
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#37492: GUIXSD 1.0.1 install error
2019-09-29 12:00 ` Marius Bakke
2019-10-03 21:46 ` RAUL H C LOPES
@ 2019-10-17 11:26 ` RAUL H C LOPES
2019-10-17 20:35 ` Marius Bakke
1 sibling, 1 reply; 9+ messages in thread
From: RAUL H C LOPES @ 2019-10-17 11:26 UTC (permalink / raw)
To: Marius Bakke, 37492
Hi,
A bug seems to have crept in after a guix update 3 weeks ago: guix
suspends my node if it decides that there is no activity.
Raul
On 29/09/2019 13:00, Marius Bakke wrote:
> RAUL H C LOPES <rlopes@cern.ch> writes:
>
>> Hi Marius,
>>
>> I've managed to install GuixSD by chossing msdos instead of gpt.
>> Coincidence? Is the gpt setup tested?
> Can you share the steps required to reproduce the error?
>
>> I've running the system for a few days.
>>
>> I need now a good manual> I'm suffering for:
>> - reconfigure stuff that is usually in /etc, like /etc/ssh/sshd_config;
> There is a good up-to-date manual here:
> <https://guix.gnu.org/manual/devel>. Search for 'openssh-configuration'
> for examples on how to configure the SSH daemon.
>
>> - running a make on an open source project who looks for linux libs
>> where debian would find them.
> Typically you would do something like `guix environment --ad-hoc
> gcc-toolchain make` to enter a shell environment where all the
> dependencies of the program you want to build are present.
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#37492: GUIXSD 1.0.1 install error
2019-10-17 11:26 ` RAUL H C LOPES
@ 2019-10-17 20:35 ` Marius Bakke
2022-07-12 14:50 ` Maxim Cournoyer
0 siblings, 1 reply; 9+ messages in thread
From: Marius Bakke @ 2019-10-17 20:35 UTC (permalink / raw)
To: RAUL H C LOPES, 37492
[-- Attachment #1: Type: text/plain, Size: 458 bytes --]
RAUL H C LOPES <rlopes@cern.ch> writes:
> A bug seems to have crept in after a guix update 3 weeks ago: guix
> suspends my node if it decides that there is no activity.
Can you file a separate bug report about this? Please also include the
system configuration you are using, and how to reproduce the problem.
Thanks!
(I plan to try reproducing the reported UEFI installer problem in the
next few days, but have been really swamped lately)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 487 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* bug#37492: GUIXSD 1.0.1 install error
2019-10-17 20:35 ` Marius Bakke
@ 2022-07-12 14:50 ` Maxim Cournoyer
0 siblings, 0 replies; 9+ messages in thread
From: Maxim Cournoyer @ 2022-07-12 14:50 UTC (permalink / raw)
To: Marius Bakke; +Cc: 37492-done, RAUL H C LOPES
Hi,
Marius Bakke <mbakke@fastmail.com> writes:
> RAUL H C LOPES <rlopes@cern.ch> writes:
>
>> A bug seems to have crept in after a guix update 3 weeks ago: guix
>> suspends my node if it decides that there is no activity.
>
> Can you file a separate bug report about this? Please also include the
> system configuration you are using, and how to reproduce the problem.
>
> Thanks!
>
> (I plan to try reproducing the reported UEFI installer problem in the
> next few days, but have been really swamped lately)
I'm closing this old and forgotten issue; our installer is now at 1.3.0
and 1.4.0 is in the making.
Thanks,
Maxim
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-07-12 14:52 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-09-23 17:21 bug#37492: GUIXSD 1.0.1 install error RAUL H C LOPES
2019-09-23 21:52 ` RAUL H C LOPES
2019-09-27 21:08 ` Marius Bakke
2019-09-27 22:50 ` RAUL H C LOPES
2019-09-29 12:00 ` Marius Bakke
2019-10-03 21:46 ` RAUL H C LOPES
2019-10-17 11:26 ` RAUL H C LOPES
2019-10-17 20:35 ` Marius Bakke
2022-07-12 14:50 ` Maxim Cournoyer
Code repositories for project(s) associated with this external index
https://git.savannah.gnu.org/cgit/guix.git
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.