all messages for Guix-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* bug#41082: Guix sd startup fails to initialize AMD Radeon RX 560
@ 2020-05-04 17:03 Ryan Osborne
  2020-05-05  1:58 ` Boris A. Dekshteyn
  2020-05-05 12:39 ` bug#41082: nomodeset Ryan Osborne
  0 siblings, 2 replies; 8+ messages in thread
From: Ryan Osborne @ 2020-05-04 17:03 UTC (permalink / raw)
  To: 41082


[-- Attachment #1.1: Type: text/plain, Size: 220 bytes --]

Same error with and without "modprobe.blacklist=radeon".
The installation medium works with the console, but it causes the installed
system to be unable to finish booting.
dmesg included as attachment

-- 
Ryan Osborne.

[-- Attachment #1.2: Type: text/html, Size: 637 bytes --]

[-- Attachment #2: dm2 --]
[-- Type: application/octet-stream, Size: 69753 bytes --]

[    0.000000] Linux version 5.4.31-gnu (nixbld@) (gcc version 7.4.0 (GCC)) #1 SMP 1
[    0.000000] Command line: BOOT_IMAGE=/gnu/store/g56i8savnfr7981fil03idkjl0syj29d-linux-libre-5.4.31/bzImage --root=31393730-3031-3031-3139-343934363833 --system=/gnu/store/m4lv4661j9pkhfcrwqddifcz32536k98-system --load=/gnu/store/m4lv4661j9pkhfcrwqddifcz32536k98-system/boot quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cca94fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cca95000-0x00000000cca9bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cca9c000-0x00000000cd44bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd44c000-0x00000000cd710fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd711000-0x00000000dde9bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dde9c000-0x00000000ddf27fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ddf28000-0x00000000ddf42fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ddf43000-0x00000000de970fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de971000-0x00000000deffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: LENOVO 10B00005US/, BIOS FCKT50AUS 04/03/2014
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FF0000000 write-back
[    0.000000]   2 base 0210000000 mask 7FF8000000 write-back
[    0.000000]   3 base 0218000000 mask 7FFC000000 write-back
[    0.000000]   4 base 021C000000 mask 7FFE000000 write-back
[    0.000000]   5 base 021E000000 mask 7FFF000000 write-back
[    0.000000]   6 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8176M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 32M 	num_reg: 6  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcd40-0x000fcd4f]
[    0.000000] check: Scanning 1 areas for low memory corruption
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x1e6c01000, 0x1e6c01fff] PGTABLE
[    0.000000] BRK [0x1e6c02000, 0x1e6c02fff] PGTABLE
[    0.000000] BRK [0x1e6c03000, 0x1e6c03fff] PGTABLE
[    0.000000] BRK [0x1e6c04000, 0x1e6c04fff] PGTABLE
[    0.000000] BRK [0x1e6c05000, 0x1e6c05fff] PGTABLE
[    0.000000] BRK [0x1e6c06000, 0x1e6c06fff] PGTABLE
[    0.000000] BRK [0x1e6c07000, 0x1e6c07fff] PGTABLE
[    0.000000] BRK [0x1e6c08000, 0x1e6c08fff] PGTABLE
[    0.000000] BRK [0x1e6c09000, 0x1e6c09fff] PGTABLE
[    0.000000] BRK [0x1e6c0a000, 0x1e6c0afff] PGTABLE
[    0.000000] BRK [0x1e6c0b000, 0x1e6c0bfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36b91000-0x375bffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000DDF2D088 000094 (v01 LENOVO TC-FC    00001320 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DDF3D8F0 00010C (v05 LENOVO TC-FC    00001320 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DDF2D1B0 010739 (v02 LENOVO TC-FC    00001320 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DE96F080 000040
[    0.000000] ACPI: APIC 0x00000000DDF3DA00 000072 (v03 LENOVO TC-FC    00001320 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DDF3DA78 000044 (v01 LENOVO TC-FC    00001320 AMI  00010013)
[    0.000000] ACPI: LPIT 0x00000000DDF3DAC0 00005C (v01 LENOVO TC-FC    00001320 AMI. 00000005)
[    0.000000] ACPI: SLIC 0x00000000DDF3DB20 000176 (v01 LENOVO TC-FC    00001320 AMI  00010013)
[    0.000000] ACPI: MSDM 0x00000000DDF3DC98 000055 (v03 LENOVO TC-FC    00001320 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DDF3DCF0 000539 (v01 LENOVO TC-FC    00001320 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DDF3E230 000AD8 (v01 LENOVO TC-FC    00001320 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000DDF3ED08 00003C (v01 LENOVO TC-FC    00001320 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DDF3ED48 000038 (v01 LENOVO TC-FC    00001320 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DDF3ED80 00036D (v01 LENOVO TC-FC    00001320 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DDF3F0F0 0034E1 (v01 LENOVO TC-FC    00001320 INTL 20091112)
[    0.000000] ACPI: DMAR 0x00000000DDF425D8 000080 (v01 LENOVO TC-FC    00001320 INTL 00000001)
[    0.000000] ACPI: BGRT 0x00000000DDF42658 000038 (v00 LENOVO TC-FC    00001320 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21effc000-0x21effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000001000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cca94fff]
[    0.000000]   node   0: [mem 0x00000000cca9c000-0x00000000cd44bfff]
[    0.000000]   node   0: [mem 0x00000000cd711000-0x00000000dde9bfff]
[    0.000000]   node   0: [mem 0x00000000defff000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Zeroed struct page in unavailable ranges: 13459 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.000000] On node 0 totalpages: 2083693
[    0.000000]   DMA32 zone: 14190 pages used for memmap
[    0.000000]   DMA32 zone: 21 pages reserved
[    0.000000]   DMA32 zone: 908141 pages, LIFO batch:63
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; /*(DEBLOBBED)*/
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcca95000-0xcca9bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd44c000-0xcd710fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdde9c000-0xddf27fff]
[    0.000000] PM: Registered nosave memory: [mem 0xddf28000-0xddf42fff]
[    0.000000] PM: Registered nosave memory: [mem 0xddf43000-0xde970fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde971000-0xdeffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 53 pages/cpu s178520 r8192 d30376 u524288
[    0.000000] pcpu-alloc: s178520 r8192 d30376 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2051114
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/gnu/store/g56i8savnfr7981fil03idkjl0syj29d-linux-libre-5.4.31/bzImage --root=31393730-3031-3031-3139-343934363833 --system=/gnu/store/m4lv4661j9pkhfcrwqddifcz32536k98-system --load=/gnu/store/m4lv4661j9pkhfcrwqddifcz32536k98-system/boot quiet
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8085340K/8334772K available (14339K kernel code, 1525K rwdata, 4180K rodata, 1916K init, 2584K bss, 249432K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 41660 entries in 163 pages
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 16640, nr_irqs: 456, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x389/0x56d with crng_init=0
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20190816
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x000000dee8f000 end: 0x000000dee9dfff
[    0.000000] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed90000 IOMMU 0
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.000000] x2apic enabled
[    0.000000] Switched APIC routing to cluster x2apic.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.032000] tsc: Unable to calibrate against PIT
[    0.032000] tsc: using HPET reference calibration
[    0.032000] tsc: Detected 3192.604 MHz processor
[    0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e04ff556d3, max_idle_ns: 440795348168 ns
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.20 BogoMIPS (lpj=12770416)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000025] LSM: Security Framework initializing
[    0.000030] Yama: becoming mindful.
[    0.000051] AppArmor: AppArmor initialized
[    0.000052] TOMOYO Linux initialized
[    0.000092] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000104] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.000112] *** VALIDATE tmpfs ***
[    0.000212] *** VALIDATE proc ***
[    0.000254] *** VALIDATE cgroup1 ***
[    0.000255] *** VALIDATE cgroup2 ***
[    0.000294] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.000305] process: using mwait in idle threads
[    0.000307] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.000308] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.000310] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.000311] Spectre V2 : Mitigation: Full generic retpoline
[    0.000311] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.000312] Speculative Store Bypass: Vulnerable
[    0.000314] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.000314] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.000446] Freeing SMP alternatives memory: 28K
[    0.112398] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.112457] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.112463] ... version:                3
[    0.112463] ... bit width:              48
[    0.112463] ... generic registers:      8
[    0.112464] ... value mask:             0000ffffffffffff
[    0.112464] ... max period:             00007fffffffffff
[    0.112465] ... fixed-purpose events:   3
[    0.112465] ... event mask:             00000007000000ff
[    0.112491] rcu: Hierarchical SRCU implementation.
[    0.113087] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.113119] smp: Bringing up secondary CPUs ...
[    0.113172] x86: Booting SMP configuration:
[    0.113172] .... node  #0, CPUs:      #1 #2 #3
[    0.113441] smp: Brought up 1 node, 4 CPUs
[    0.113441] smpboot: Max logical packages: 1
[    0.113441] smpboot: Total of 4 processors activated (25540.83 BogoMIPS)
[    0.113650] devtmpfs: initialized
[    0.113650] x86/mm: Memory block size: 128MB
[    0.116228] PM: Registering ACPI NVS region [mem 0xcca95000-0xcca9bfff] (28672 bytes)
[    0.116228] PM: Registering ACPI NVS region [mem 0xddf43000-0xde970fff] (10674176 bytes)
[    0.116228] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.116228] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.116228] pinctrl core: initialized pinctrl subsystem
[    0.116276] PM: RTC time: 16:55:52, date: 2020-05-04
[    0.116335] NET: Registered protocol family 16
[    0.116394] audit: initializing netlink subsys (disabled)
[    0.116398] audit: type=2000 audit(1588611352.148:1): state=initialized audit_enabled=0 res=1
[    0.116398] cpuidle: using governor ladder
[    0.116398] cpuidle: using governor menu
[    0.116398] ACPI: bus type PCI registered
[    0.116398] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.116398] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.116398] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.116398] PCI: Using configuration type 1 for base access
[    0.116398] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.116436] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.116996] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.116996] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.116996] ACPI: Added _OSI(Module Device)
[    0.116996] ACPI: Added _OSI(Processor Device)
[    0.116996] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.116996] ACPI: Added _OSI(Processor Aggregator Device)
[    0.116996] ACPI: Added _OSI(Linux-Dell-Video)
[    0.116996] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.116996] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.128529] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.129544] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.130131] ACPI: Dynamic OEM Table Load:
[    0.130134] ACPI: SSDT 0xFFFF975A152D5C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.130757] ACPI: Dynamic OEM Table Load:
[    0.130761] ACPI: SSDT 0xFFFF975A152C2000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.131610] ACPI: Dynamic OEM Table Load:
[    0.131613] ACPI: SSDT 0xFFFF975A15325800 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.132716] ACPI: Interpreter enabled
[    0.132740] ACPI: (supports S0 S3 S4 S5)
[    0.132741] ACPI: Using IOAPIC for interrupt routing
[    0.132761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.132998] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.140592] ACPI: Power Resource [FN00] (off)
[    0.140644] ACPI: Power Resource [FN01] (off)
[    0.140696] ACPI: Power Resource [FN02] (off)
[    0.140744] ACPI: Power Resource [FN03] (off)
[    0.140792] ACPI: Power Resource [FN04] (off)
[    0.141390] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.141394] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.141832] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.142115] PCI host bridge to bus 0000:00
[    0.142116] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.142117] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.142118] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.142119] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.142120] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.142120] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.142121] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.142122] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.142123] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.142123] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.142124] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.142131] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.142198] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.142229] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.142335] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.142354] pci 0000:00:14.0: reg 0x10: [mem 0xf7f00000-0xf7f0ffff 64bit]
[    0.142407] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.142470] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.142489] pci 0000:00:16.0: reg 0x10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
[    0.142544] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.142605] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.142625] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f18000-0xf7f183ff]
[    0.142698] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.142763] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.142781] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f10000-0xf7f13fff 64bit]
[    0.142842] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.142904] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.144066] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.144166] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.144236] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.144329] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.144349] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f17000-0xf7f173ff]
[    0.144423] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.144488] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    0.144641] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    0.144655] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.144662] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.144668] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.144674] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.144680] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.144686] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f16000-0xf7f167ff]
[    0.144718] pci 0000:00:1f.2: PME# supported from D3hot
[    0.144774] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.144790] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f15000-0xf7f150ff 64bit]
[    0.144807] pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
[    0.144903] pci 0000:01:00.0: [1002:67ff] type 00 class 0x030000
[    0.144925] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.144934] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.144940] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.144945] pci 0000:01:00.0: reg 0x24: [mem 0xf7e00000-0xf7e3ffff]
[    0.144951] pci 0000:01:00.0: reg 0x30: [mem 0xf7e40000-0xf7e5ffff pref]
[    0.145008] pci 0000:01:00.0: supports D1 D2
[    0.145009] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.145037] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8 GT/s x8 link)
[    0.145079] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
[    0.145097] pci 0000:01:00.1: reg 0x10: [mem 0xf7e60000-0xf7e63fff 64bit]
[    0.145165] pci 0000:01:00.1: supports D1 D2
[    0.145233] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.145234] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.145236] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.145238] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.145283] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.145344] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.145373] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.145399] pci 0000:03:00.0: reg 0x18: [mem 0xf7d04000-0xf7d04fff 64bit]
[    0.145416] pci 0000:03:00.0: reg 0x20: [mem 0xf7d00000-0xf7d03fff 64bit pref]
[    0.145514] pci 0000:03:00.0: supports D1 D2
[    0.145514] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.145625] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.145628] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.145631] pci 0000:00:1c.5:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.147209] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.147245] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.148038] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.148071] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.148103] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.148135] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.148168] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.148201] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.148506] iommu: Default domain type: Translated 
[    0.148506] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.148506] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.148506] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.148506] vgaarb: loaded
[    0.148506] SCSI subsystem initialized
[    0.148506] libata version 3.00 loaded.
[    0.148506] ACPI: bus type USB registered
[    0.148506] usbcore: registered new interface driver usbfs
[    0.148506] usbcore: registered new interface driver hub
[    0.148506] usbcore: registered new device driver usb
[    0.148506] EDAC MC: Ver: 3.0.0
[    0.148506] PCI: Using ACPI for IRQ routing
[    0.149055] PCI: pci_cache_line_size set to 64 bytes
[    0.149088] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.149089] e820: reserve RAM buffer [mem 0xcca95000-0xcfffffff]
[    0.149089] e820: reserve RAM buffer [mem 0xcd44c000-0xcfffffff]
[    0.149090] e820: reserve RAM buffer [mem 0xdde9c000-0xdfffffff]
[    0.149091] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.149091] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.149170] NetLabel: Initializing
[    0.149171] NetLabel:  domain hash size = 128
[    0.149171] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.149182] NetLabel:  unlabeled traffic allowed by default
[    0.149192] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.149192] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.152006] clocksource: Switched to clocksource tsc-early
[    0.160559] *** VALIDATE bpf ***
[    0.160616] VFS: Disk quotas dquot_6.6.0
[    0.160628] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.160644] *** VALIDATE ramfs ***
[    0.160647] *** VALIDATE hugetlbfs ***
[    0.160720] AppArmor: AppArmor Filesystem Enabled
[    0.160739] pnp: PnP ACPI init
[    0.160819] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.160823] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.160943] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.160944] system 00:01: [io  0xffff] has been reserved
[    0.160945] system 00:01: [io  0xffff] has been reserved
[    0.160946] system 00:01: [io  0xffff] has been reserved
[    0.160947] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.160947] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.160948] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.160949] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.160950] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.160951] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.160954] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.160970] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.161003] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.161006] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.161092] system 00:04: [io  0x0a00-0x0a1f] has been reserved
[    0.161093] system 00:04: [io  0x0a30-0x0a3f] has been reserved
[    0.161094] system 00:04: [io  0x0a20-0x0a2f] has been reserved
[    0.161096] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.161301] pnp 00:05: [dma 0 disabled]
[    0.161330] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.161443] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.161446] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.161745] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.161746] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.161747] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.161748] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.161749] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.161750] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.161751] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.161752] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.161753] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.161754] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.161755] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.161756] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.161759] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.161920] pnp: PnP ACPI: found 8 devices
[    0.162992] thermal_sys: Registered thermal governor 'fair_share'
[    0.162992] thermal_sys: Registered thermal governor 'bang_bang'
[    0.162993] thermal_sys: Registered thermal governor 'step_wise'
[    0.162993] thermal_sys: Registered thermal governor 'user_space'
[    0.162994] thermal_sys: Registered thermal governor 'power_allocator'
[    0.167485] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.167509] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.167511] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.167512] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.167518] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf03fffff]
[    0.167523] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.167525] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.167527] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.167528] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.167530] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.167532] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.167534] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.167536] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.167540] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff]
[    0.167544] pci 0000:00:1c.0:   bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.167549] pci 0000:00:1c.5: PCI bridge to [bus 03]
[    0.167550] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.167554] pci 0000:00:1c.5:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.167561] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.167562] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.167563] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.167563] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.167564] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.167565] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.167566] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.167566] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.167567] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.167568] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.167569] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.167570] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.167570] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.167571] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.167572] pci_bus 0000:02: resource 1 [mem 0xf0200000-0xf03fffff]
[    0.167573] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[    0.167574] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.167574] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.167656] NET: Registered protocol family 2
[    0.167756] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.167791] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.167894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.167992] TCP: Hash tables configured (established 65536 bind 65536)
[    0.168018] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.168036] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.168072] NET: Registered protocol family 1
[    0.193605] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c0 took 24779 usecs
[    0.217600] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c0 took 23420 usecs
[    0.217614] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.217619] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.217625] PCI: CLS 64 bytes, default 64
[    0.217690] Trying to unpack rootfs image as initramfs...
[    0.349141] Freeing initrd memory: 10428K
[    0.369549] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.369550] software IO TLB: mapped [mem 0xd9e9c000-0xdde9c000] (64MB)
[    0.369600] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[    0.369600] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    0.369601] RAPL PMU: hw unit of domain package 2^-14 Joules
[    0.369601] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    0.369762] check: Scanning for low memory corruption every 60 seconds
[    0.370153] Initialise system trusted keyrings
[    0.370173] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.371063] zbud: loaded
[    0.371480] Allocating IMA blacklist keyring.
[    0.374395] Key type asymmetric registered
[    0.374396] Asymmetric key parser 'x509' registered
[    0.374401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.374423] io scheduler mq-deadline registered
[    0.374624] pcieport 0000:00:01.0: PME: Signaling with IRQ 25
[    0.374756] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[    0.374775] pcieport 0000:00:1c.0: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.374942] pcieport 0000:00:1c.5: PME: Signaling with IRQ 27
[    0.374995] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.375014] intel_idle: MWAIT substates: 0x42120
[    0.375015] intel_idle: v0.4.1 model 0x3C
[    0.375148] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.375206] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.375231] ACPI: Power Button [PWRB]
[    0.375257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.375271] ACPI: Power Button [PWRF]
[    0.375737] thermal LNXTHERM:00: registered as thermal_zone0
[    0.375738] ACPI: Thermal Zone [TZ00] (28 C)
[    0.375881] thermal LNXTHERM:01: registered as thermal_zone1
[    0.375882] ACPI: Thermal Zone [TZ01] (30 C)
[    0.375963] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.396324] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.397419] Linux agpgart interface v0.103
[    0.398919] brd: module loaded
[    0.400015] loop: module loaded
[    0.400454] libphy: Fixed MDIO Bus: probed
[    0.400454] tun: Universal TUN/TAP device driver, 1.6
[    0.400501] PPP generic driver version 2.4.2
[    0.400561] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.400564] ehci-pci: EHCI PCI platform driver
[    0.400649] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.400653] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.400663] ehci-pci 0000:00:1a.0: debug port 2
[    0.404565] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.404574] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7f18000
[    0.420814] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.420856] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.420857] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.420858] usb usb1: Product: EHCI Host Controller
[    0.420859] usb usb1: Manufacturer: Linux 5.4.31-gnu ehci_hcd
[    0.420859] usb usb1: SerialNumber: 0000:00:1a.0
[    0.421035] hub 1-0:1.0: USB hub found
[    0.421039] hub 1-0:1.0: 2 ports detected
[    0.421263] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.421267] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.421276] ehci-pci 0000:00:1d.0: debug port 2
[    0.425165] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.425177] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f17000
[    0.440808] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.440849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.440850] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.440852] usb usb2: Product: EHCI Host Controller
[    0.440852] usb usb2: Manufacturer: Linux 5.4.31-gnu ehci_hcd
[    0.440853] usb usb2: SerialNumber: 0000:00:1d.0
[    0.441025] hub 2-0:1.0: USB hub found
[    0.441030] hub 2-0:1.0: 2 ports detected
[    0.441159] ehci-platform: EHCI generic platform driver
[    0.441173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.441175] ohci-pci: OHCI PCI platform driver
[    0.441183] ohci-platform: OHCI generic platform driver
[    0.441188] uhci_hcd: USB Universal Host Controller Interface driver
[    0.441300] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.441304] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.442345] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.442349] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.442462] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    0.442463] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.442463] usb usb3: Product: xHCI Host Controller
[    0.442464] usb usb3: Manufacturer: Linux 5.4.31-gnu xhci-hcd
[    0.442465] usb usb3: SerialNumber: 0000:00:14.0
[    0.442600] hub 3-0:1.0: USB hub found
[    0.442612] hub 3-0:1.0: 10 ports detected
[    0.443569] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.443571] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.443573] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    0.443594] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[    0.443595] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.443595] usb usb4: Product: xHCI Host Controller
[    0.443596] usb usb4: Manufacturer: Linux 5.4.31-gnu xhci-hcd
[    0.443597] usb usb4: SerialNumber: 0000:00:14.0
[    0.443729] hub 4-0:1.0: USB hub found
[    0.443736] hub 4-0:1.0: 2 ports detected
[    0.443893] i8042: PNP: No PS/2 controller found.
[    0.444084] mousedev: PS/2 mouse device common for all mice
[    0.444260] rtc_cmos 00:02: RTC can wake from S4
[    0.444422] rtc_cmos 00:02: registered as rtc0
[    0.444431] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.444435] i2c /dev entries driver
[    0.444464] device-mapper: uevent: version 1.0.3
[    0.444501] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[    0.444505] intel_pstate: Intel P-state driver initializing
[    0.444777] ledtrig-cpu: registered to indicate activity on CPUs
[    0.444997] NET: Registered protocol family 10
[    0.445145] Segment Routing with IPv6
[    0.445157] NET: Registered protocol family 17
[    0.445214] Key type dns_resolver registered
[    0.445414] microcode: sig=0x306c3, pf=0x2, revision=0x17
[    0.445455] microcode: Microcode Update Driver: v2.2.
[    0.445457] IPI shorthand broadcast: enabled
[    0.445464] sched_clock: Marking stable (477448698, -31996205)->(444106628, 1345865)
[    0.445534] registered taskstats version 1
[    0.445536] Loading compiled-in X.509 certificates
[    0.445554] zswap: loaded using pool lzo/zbud
[    0.445859] Key type big_key registered
[    0.445946] Key type encrypted registered
[    0.445948] AppArmor: AppArmor sha1 policy hashing enabled
[    0.445951] ima: No TPM chip found, activating TPM-bypass!
[    0.445954] ima: Allocated hash algorithm: sha1
[    0.445958] ima: No architecture policies found
[    0.445964] evm: Initialising EVM extended attributes:
[    0.445964] evm: security.selinux
[    0.445965] evm: security.SMACK64
[    0.445965] evm: security.SMACK64EXEC
[    0.445966] evm: security.SMACK64TRANSMUTE
[    0.445966] evm: security.SMACK64MMAP
[    0.445966] evm: security.apparmor
[    0.445967] evm: security.ima
[    0.445967] evm: security.capability
[    0.445967] evm: HMAC attrs: 0x1
[    0.446317] PM:   Magic number: 4:880:943
[    0.446342] tty tty0: hash matches
[    0.446343] tty console: hash matches
[    0.446401] rtc_cmos 00:02: setting system clock to 2020-05-04T16:55:53 UTC (1588611353)
[    0.447270] Freeing unused kernel image memory: 1916K
[    0.459793] Write protecting the kernel read-only data: 22528k
[    0.460192] Freeing unused kernel image memory: 2036K
[    0.460440] Freeing unused kernel image memory: 1964K
[    0.460457] Run /init as init process
[    0.500029] ahci 0000:00:1f.2: version 3.0
[    0.500190] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[    0.500191] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems 
[    0.514072] scsi host0: ahci
[    0.514385] scsi host1: ahci
[    0.514639] scsi host2: ahci
[    0.514751] scsi host3: ahci
[    0.514791] ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 29
[    0.514793] ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 29
[    0.514794] ata3: DUMMY
[    0.514794] ata4: DUMMY
[    0.755767] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.775773] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[    0.775781] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.784708] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04
[    0.784720] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.785105] hub 1-1:1.0: USB hub found
[    0.785329] hub 1-1:1.0: 4 ports detected
[    0.804720] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04
[    0.804722] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.805105] hub 2-1:1.0: USB hub found
[    0.805329] hub 2-1:1.0: 6 ports detected
[    0.828812] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.831771] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.832219] ata1.00: supports DRM functions and may not be fully accessible
[    0.833452] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max UDMA/133
[    0.833455] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    0.836266] ata1.00: supports DRM functions and may not be fully accessible
[    0.839541] ata1.00: configured for UDMA/133
[    0.839743] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    0.840000] ata1.00: Enabling discard_zeroes_data
[    0.840022] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.840023] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    0.840029] sd 0:0:0:0: [sda] Write Protect is off
[    0.840030] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.840036] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.857384] ata1.00: Enabling discard_zeroes_data
[    0.857990]  sda: sda1 sda2 < sda5 >
[    0.858462] ata1.00: Enabling discard_zeroes_data
[    0.858510] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.880580] ata2.00: ATA-8: TOSHIBA MQ01ABD100M, AX101U, max UDMA/100
[    0.880583] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    0.882667] ata2.00: configured for UDMA/100
[    0.882858] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD1 1U   PQ: 0 ANSI: 5
[    0.883130] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    0.883131] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    0.883134] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    0.883136] sd 1:0:0:0: [sdb] Write Protect is off
[    0.883138] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.883144] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.925152] usb 3-1: New USB device found, idVendor=413d, idProduct=2107, bcdDevice= 0.00
[    0.925154] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.974646]  sdb: sdb1 sdb2
[    0.975040] sd 1:0:0:0: [sdb] Attached SCSI disk
[    0.976383] usbcore: registered new interface driver usb-storage
[    0.977505] usbcore: registered new interface driver uas
[    0.978597] hidraw: raw HID events driver (C) Jiri Kosina
[    0.982012] usbcore: registered new interface driver usbhid
[    0.982013] usbhid: USB HID core driver
[    0.982769] input: HID 413d:2107 Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:413D:2107.0001/input/input2
[    1.036222] input: HID 413d:2107 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:413D:2107.0001/input/input3
[    1.036292] input: HID 413d:2107 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:413D:2107.0001/input/input4
[    1.036348] input: HID 413d:2107 Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:413D:2107.0001/input/input5
[    1.036403] hid-generic 0003:413D:2107.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 413d:2107] on usb-0000:00:14.0-1/input0
[    1.036500] hid-generic 0003:413D:2107.0002: hiddev0,hidraw1: USB HID v1.10 Device [HID 413d:2107] on usb-0000:00:14.0-1/input1
[    1.045055] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[    1.048016] usb 3-5: new full-speed USB device number 3 using xhci_hcd
[    1.199229] usb 3-5: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.07
[    1.199230] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.199231] usb 3-5: Product: USB Receiver
[    1.199232] usb 3-5: Manufacturer: Logitech
[    1.203404] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C52B.0003/input/input6
[    1.260308] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[    1.263598] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52B.0004/input/input7
[    1.263831] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52B.0004/input/input8
[    1.320225] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52B.0004/input/input9
[    1.320531] hid-generic 0003:046D:C52B.0004: input,hiddev1,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[    1.323241] hid-generic 0003:046D:C52B.0005: hiddev2,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input2
[    1.372078] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[    1.372083] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[    1.372104] clocksource: Switched to clocksource tsc
[    1.448077] usb 3-6: new high-speed USB device number 4 using xhci_hcd
[    1.479809] usb 3-6: New USB device found, idVendor=0951, idProduct=1666, bcdDevice= 0.01
[    1.479810] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.479812] usb 3-6: Product: DataTraveler 3.0
[    1.479813] usb 3-6: Manufacturer: Kingston
[    1.479813] usb 3-6: SerialNumber: 60A44C42568CF270499008FF
[    1.481783] usb-storage 3-6:1.0: USB Mass Storage device detected
[    1.482144] scsi host4: usb-storage 3-6:1.0
[    1.608084] usb 3-9: new high-speed USB device number 5 using xhci_hcd
[    1.628387] usb 3-9: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    1.628389] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.628390] usb 3-9: Product: USB 2.0 Hub
[    1.629092] hub 3-9:1.0: USB hub found
[    1.629109] hub 3-9:1.0: 4 ports detected
[    2.036079] usb 3-9.1: new low-speed USB device number 6 using xhci_hcd
[    2.120711] random: fast init done
[    2.265640] usb 3-9.1: New USB device found, idVendor=0a81, idProduct=0205, bcdDevice= 0.10
[    2.265642] usb 3-9.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.265643] usb 3-9.1: Product: PS2 to USB Converter
[    2.265644] usb 3-9.1: Manufacturer: CHESEN
[    2.277850] input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0A81:0205.0006/input/input11
[    2.336306] hid-generic 0003:0A81:0205.0006: input,hidraw5: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:14.0-9.1/input0
[    2.343946] input: CHESEN PS2 to USB Converter Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0A81:0205.0007/input/input12
[    2.344181] input: CHESEN PS2 to USB Converter System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0A81:0205.0007/input/input13
[    2.404228] input: CHESEN PS2 to USB Converter Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0A81:0205.0007/input/input14
[    2.404431] hid-generic 0003:0A81:0205.0007: input,hidraw6: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:14.0-9.1/input1
[    2.492834] scsi 4:0:0:0: Direct-Access     Kingston DataTraveler 3.0      PQ: 0 ANSI: 6
[    2.493010] sd 4:0:0:0: Attached scsi generic sg2 type 0
[    2.493365] sd 4:0:0:0: [sdc] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[    2.493723] sd 4:0:0:0: [sdc] Write Protect is off
[    2.493736] sd 4:0:0:0: [sdc] Mode Sense: 4f 00 00 00
[    2.493987] sd 4:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    2.510766]  sdc: sdc1 sdc2
[    2.512162] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    2.604078] usb 3-9.3: new full-speed USB device number 7 using xhci_hcd
[    2.826473] usb 3-9.3: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
[    2.826475] usb 3-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.826476] usb 3-9.3: Product: PRODUCT
[    2.826477] usb 3-9.3: Manufacturer: tshort
[    2.826478] usb 3-9.3: SerialNumber: 0
[    2.833506] input: tshort PRODUCT as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.0/0003:FEED:3060.0008/input/input15
[    2.892305] hid-generic 0003:FEED:3060.0008: input,hidraw7: USB HID v1.11 Keyboard [tshort PRODUCT] on usb-0000:00:14.0-9.3/input0
[    2.893800] input: tshort PRODUCT Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.1/0003:FEED:3060.0009/input/input16
[    2.894024] input: tshort PRODUCT System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.1/0003:FEED:3060.0009/input/input17
[    2.952235] input: tshort PRODUCT Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.3/3-9.3:1.1/0003:FEED:3060.0009/input/input18
[    2.952423] hid-generic 0003:FEED:3060.0009: input,hidraw8: USB HID v1.11 Mouse [tshort PRODUCT] on usb-0000:00:14.0-9.3/input1
[    3.132043] usb 3-9.4: new high-speed USB device number 8 using xhci_hcd
[    3.151247] ISO 9660 Extensions: RRIP_1991A
[    3.152278] usb 3-9.4: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[    3.152279] usb 3-9.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.152280] usb 3-9.4: Product: USB 2.0 Hub
[    3.153161] hub 3-9.4:1.0: USB hub found
[    3.153183] hub 3-9.4:1.0: 4 ports detected
[    3.358119] random: dbus-uuidgen: uninitialized urandom read (12 bytes read)
[    3.358132] random: dbus-uuidgen: uninitialized urandom read (8 bytes read)
[    3.560078] usb 3-9.4.4: new full-speed USB device number 9 using xhci_hcd
[    3.782444] usb 3-9.4.4: New USB device found, idVendor=feed, idProduct=3060, bcdDevice= 0.01
[    3.782446] usb 3-9.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.782447] usb 3-9.4.4: Product: PRODUCT
[    3.782448] usb 3-9.4.4: Manufacturer: tshort
[    3.782449] usb 3-9.4.4: SerialNumber: 0
[    3.789602] input: tshort PRODUCT as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.0/0003:FEED:3060.000A/input/input19
[    3.848294] hid-generic 0003:FEED:3060.000A: input,hidraw9: USB HID v1.11 Keyboard [tshort PRODUCT] on usb-0000:00:14.0-9.4.4/input0
[    3.849796] input: tshort PRODUCT Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.1/0003:FEED:3060.000B/input/input20
[    3.850020] input: tshort PRODUCT System Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.1/0003:FEED:3060.000B/input/input21
[    3.908233] input: tshort PRODUCT Consumer Control as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.1/0003:FEED:3060.000B/input/input22
[    3.908423] hid-generic 0003:FEED:3060.000B: input,hidraw10: USB HID v1.11 Mouse [tshort PRODUCT] on usb-0000:00:14.0-9.4.4/input1
[    5.572012] random: crng init done
[    6.550648] shepherd[1]: Service root has been started.
[    6.807663] shepherd[1]: starting services...
[    6.808032] shepherd[1]: Service root-file-system has been started.
[    6.808315] shepherd[1]: Service user-file-systems has been started.
[    6.815577] shepherd[1]: waiting for udevd...
[    6.854238] udevd[210]: starting version 3.2.9
[    6.897802] udevd[210]: starting eudev-3.2.9
[    7.316378] udevd[210]: no sender credentials received, message ignored
[    7.463451] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190816/utaddress-213)
[    7.463455] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.463457] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
[    7.463459] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.463459] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-213)
[    7.463461] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
[    7.463463] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.463463] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190816/utaddress-213)
[    7.463464] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190816/utaddress-213)
[    7.463466] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.463466] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.568328] usbcore: registered new interface driver usbkbd
[    7.571103] usbcore: registered new interface driver usbmouse
[    7.668836] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    7.668838] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[    7.772568] logitech-djreceiver 0003:046D:C52B.0005: hiddev1,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input2
[    7.828065] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    7.851675] input: PC Speaker as /devices/platform/pcspkr/input/input25
[    7.861190] iTCO_vendor_support: vendor-support=0
[    7.871459] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    7.871490] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    7.871557] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.899252] input: Logitech Unifying Device. Wireless PID:1028 Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.2/0003:046D:C52B.0005/0003:046D:1028.000C/input/input26
[    7.899314] hid-generic 0003:046D:1028.000C: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1028] on usb-0000:00:14.0-5/input2:1
[    7.899961] intel-spi intel-spi: mx25l6405d (8192 Kbytes)
[    7.901991] Error: Driver 'pcspkr' is already registered, aborting...
[    7.916254] cryptd: max_cpu_qlen set to 1000
[    7.949895] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    7.949897] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    7.949898] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    7.949899] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    7.949899] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    7.949900] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    7.949901] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    7.949902] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    7.964492] AVX2 version of gcm_enc/dec engaged.
[    7.964493] AES CTR mode by8 optimization enabled
[    7.967100] input: Logitech M570 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.2/0003:046D:C52B.0005/0003:046D:1028.000C/input/input35
[    7.967207] logitech-hidpp-device 0003:046D:1028.000C: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:14.0-5/input2:1
[    8.069780] [drm] amdgpu kernel modesetting enabled.
[    8.069819] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xe0000000 -> 0xefffffff
[    8.069820] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf0000000 -> 0xf01fffff
[    8.069821] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xf7e00000 -> 0xf7e3ffff
[    8.069822] amdgpu 0000:01:00.0: vgaarb: deactivate vga console
[    8.073249] Console: switching to colour dummy device 80x25
[    8.073973] [drm] initializing kernel modesetting (POLARIS11 0x1002:0x67FF 0x1462:0x8A91 0xCF).
[    8.073987] [drm] register mmio base: 0xF7E00000
[    8.073987] [drm] register mmio size: 262144
[    8.073993] [drm] add ip block number 0 <vi_common>
[    8.073994] [drm] add ip block number 1 <gmc_v8_0>
[    8.073995] [drm] add ip block number 2 <tonga_ih>
[    8.073995] [drm] add ip block number 3 <gfx_v8_0>
[    8.073996] [drm] add ip block number 4 <sdma_v3_0>
[    8.073996] [drm] add ip block number 5 <powerplay>
[    8.073997] [drm] add ip block number 6 <dm>
[    8.073997] [drm] add ip block number 7 <uvd_v6_0>
[    8.073998] [drm] add ip block number 8 <vce_v3_0>
[    8.074243] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[    8.074246] caller pci_map_rom+0x6f/0x1e0 mapping multiple BARs
[    8.074262] ATOM BIOS: 113-C98121-H01
[    8.074274] [drm] UVD is enabled in VM mode
[    8.074274] [drm] UVD ENC is enabled in VM mode
[    8.074276] [drm] VCE enabled in VM mode
[    8.074305] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    8.074306] 0000:01:00.0: Missing Free firmware (non-Free firmware loading is disabled)
[    8.077709] mc: Failed to load firmware "/*(DEBLOBBED)*/"
[    8.077766] [drm:gmc_v8_0_sw_init [amdgpu]] *ERROR* Failed to load mc firmware!
[    8.077805] [drm:amdgpu_device_init [amdgpu]] *ERROR* sw_init of IP block <gmc_v8_0> failed -2
[    8.077808] amdgpu 0000:01:00.0: amdgpu_device_ip_init failed
[    8.077811] amdgpu 0000:01:00.0: Fatal error during GPU init
[    8.077813] [drm] amdgpu: finishing device.
[    8.077829] ------------[ cut here ]------------
[    8.077829] sysfs group 'fw_version' not found for kobject '0000:01:00.0'
[    8.077839] WARNING: CPU: 2 PID: 213 at fs/sysfs/group.c:280 sysfs_remove_group+0x81/0x90
[    8.077839] Modules linked in: amdgpu(+) aesni_intel(+) snd_hda_codec_realtek snd_hda_codec_generic r8169(+) crypto_simd ledtrig_audio cryptd hid_logitech_hidpp glue_helper intel_spi_platform(+) intel_spi spi_nor iTCO_wdt mtd iTCO_vendor_support pcspkr gpu_sched ttm i2c_i801 realtek snd_hda_codec_hdmi wmi_bmof drm_kms_helper drm i2c_algo_bit fb_sys_fops syscopyarea snd_hda_intel sysfillrect sysimgblt snd_intel_nhlt joydev input_leds snd_hda_codec snd_hda_core hid_logitech_dj usbmouse wmi snd_hwdep usbkbd snd_pcm snd_timer snd soundcore lpc_ich video mac_hid overlay isofs virtio_rng virtio_console virtio_net virtio_blk virtio_balloon virtio_pci virtio virtio_ring isci libsas scsi_transport_sas pata_atiixp pata_acpi nls_iso8859_1 wp512 serpent_generic xts dm_crypt hid_apple hid_generic usbhid hid uas usb_storage ahci libahci
[    8.077863] CPU: 2 PID: 213 Comm: udevd Not tainted 5.4.31-gnu #1
[    8.077864] Hardware name: LENOVO 10B00005US/, BIOS FCKT50AUS 04/03/2014
[    8.077866] RIP: 0010:sysfs_remove_group+0x81/0x90
[    8.077867] Code: e8 54 b5 ff ff 5b 41 5c 41 5d 5d c3 48 89 df e8 f5 b1 ff ff eb c6 49 8b 55 00 49 8b 34 24 48 c7 c7 b0 ff 2e a3 e8 3f ba d1 ff <0f> 0b 5b 41 5c 41 5d 5d c3 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48
[    8.077868] RSP: 0000:ffffa50dc05a78b8 EFLAGS: 00010286
[    8.077869] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffa365b0e8
[    8.077869] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000247
[    8.077870] RBP: ffffa50dc05a78d0 R08: 0000000000000366 R09: 0000000000000004
[    8.077870] R10: ffff975a0e7373a0 R11: 0000000000000001 R12: ffffffffc0ba9980
[    8.077871] R13: ffff975a14e7c0b0 R14: ffff975a0b734d78 R15: 0000000000000000
[    8.077872] FS:  00007fe074991bc0(0000) GS:ffff975a16b00000(0000) knlGS:0000000000000000
[    8.077872] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    8.077873] CR2: 00007fed55dc3000 CR3: 000000021052c001 CR4: 00000000001606e0
[    8.077874] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    8.077874] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    8.077875] Call Trace:
[    8.077916]  amdgpu_ucode_sysfs_fini+0x1c/0x20 [amdgpu]
[    8.077951]  amdgpu_device_fini+0x2d8/0x540 [amdgpu]
[    8.077986]  amdgpu_driver_unload_kms+0x50/0xa0 [amdgpu]
[    8.078020]  amdgpu_driver_load_kms+0x13b/0x230 [amdgpu]
[    8.078034]  drm_dev_register+0x12b/0x1c0 [drm]
[    8.078066]  amdgpu_pci_probe+0xd3/0x160 [amdgpu]
[    8.078069]  local_pci_probe+0x49/0xa0
[    8.078071]  pci_device_probe+0x108/0x1b0
[    8.078072]  ? sysfs_create_link+0x3e/0x50
[    8.078076]  really_probe+0xf8/0x440
[    8.078078]  driver_probe_device+0x11b/0x130
[    8.078079]  device_driver_attach+0x58/0x60
[    8.078081]  __driver_attach+0xa9/0x150
[    8.078082]  ? device_driver_attach+0x60/0x60
[    8.078084]  ? device_driver_attach+0x60/0x60
[    8.078085]  bus_for_each_dev+0x8e/0xd0
[    8.078087]  driver_attach+0x22/0x30
[    8.078088]  bus_add_driver+0x14a/0x220
[    8.078089]  driver_register+0x60/0x100
[    8.078091]  __pci_register_driver+0x68/0x70
[    8.078092]  ? 0xffffffffc0d18000
[    8.078127]  amdgpu_init+0x74/0x83 [amdgpu]
[    8.078129]  do_one_initcall+0x60/0x20a
[    8.078131]  do_init_module+0x5f/0x22d
[    8.078132]  load_module+0x2644/0x2c90
[    8.078134]  __do_sys_finit_module+0x119/0x140
[    8.078136]  ? __do_sys_finit_module+0x119/0x140
[    8.078137]  __x64_sys_finit_module+0x1e/0x30
[    8.078138]  do_syscall_64+0x5a/0x190
[    8.078141]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[    8.078142] RIP: 0033:0x7fe074a81859
[    8.078144] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 07 56 0c 00 f7 d8 64 89 01 48
[    8.078144] RSP: 002b:00007ffc39103818 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    8.078146] RAX: ffffffffffffffda RBX: 0000000001d424d0 RCX: 00007fe074a81859
[    8.078146] RDX: 0000000000000000 RSI: 00007fe074be48ad RDI: 0000000000000013
[    8.078147] RBP: 00007fe074be48ad R08: 0000000000000000 R09: 0000000000000000
[    8.078147] R10: 0000000000000013 R11: 0000000000000246 R12: 0000000000000000
[    8.078148] R13: 0000000001d44180 R14: 0000000000020000 R15: 0000000000449780
[    8.078149] ---[ end trace ad704716f9d3251e ]---
[    8.078273] amdgpu: probe of 0000:01:00.0 failed with error -2
[    8.104982] libphy: r8169: probed
[    8.105119] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input30
[    8.105148] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 44:8a:5b:75:32:93, XID 4c0, IRQ 32
[    8.105149] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    8.105205] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input23
[    8.105226] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input31
[    8.105261] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input32
[    8.105306] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input24
[    8.105453] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input33
[    8.105585] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input34
[    8.110895] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    8.125575] Creating 1 MTD partitions on "intel-spi":
[    8.125587] 0x000000000000-0x000000800000 : "BIOS"
[    8.417234] intel_rapl_common: Found RAPL domain package
[    8.417236] intel_rapl_common: Found RAPL domain core
[    8.417237] intel_rapl_common: Found RAPL domain dram
[    8.417238] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[    8.417241] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[    8.428835] shepherd[1]: Service udev has been started.
[    8.429399] shepherd[1]: Service file-system-/tmp has been started.
[    8.429863] shepherd[1]: Service file-system-/dev/pts has been started.
[    8.430281] shepherd[1]: Service file-system-/dev/shm has been started.
[    8.430678] shepherd[1]: Service file-system-/gnu/store has been started.
[    8.430931] shepherd[1]: Service file-systems has been started.
[    8.431208] shepherd[1]: Service user-processes has been started.
[    8.431482] shepherd[1]: Service host-name has been started.
[    8.439216] shepherd[1]: Service user-homes has been started.
[    8.453263] uvesafb: (C) 1988-2010, Advanced Micro Devices, Inc., POLARIS21, 01.00, OEM: AMD ATOMBIOS, VBE v3.0
[    8.472380] uvesafb: VBIOS/hardware supports DDC2 transfers
[    8.476278] uvesafb: monitor limits: vf = 75 Hz, hf = 83 kHz, clk = 170 MHz
[    8.476328] uvesafb: scrolling: redraw
[    8.508935] uvesafb: mode switch failed (eax=0x34f, err=0) - trying again with default timings
[    8.569228] Console: switching to colour frame buffer device 128x48
[    8.569334] uvesafb: mode switch failed (eax=0x34f, err=0) - trying again with default timings
[    8.649590] uvesafb: framebuffer at 0xe0000000, mapped to 0x00000000c569ca72, using 16200k, total 49152k
[    8.649591] uvesafb: fb0: VESA VGA frame buffer device
[    8.650264] shepherd[1]: Service uvesafb has been started.
[    9.932399] 0000:03:00.0: Missing Free firmware (non-Free firmware loading is disabled)
[    9.932431] r8169 0000:03:00.0: Unable to load firmware /*(DEBLOBBED)*/ (-2)
[    9.932492] Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   10.032842] r8169 0000:03:00.0 enp3s0: Link is Down
[   10.881907] uvesafb: mode switch failed (eax=0x34f, err=0) - trying again with default timings
[   12.513003] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[   12.513013] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   12.539619] 8021q: 802.1Q VLAN Support v1.8

^ permalink raw reply	[flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-05-10 19:45 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-05-04 17:03 bug#41082: Guix sd startup fails to initialize AMD Radeon RX 560 Ryan Osborne
2020-05-05  1:58 ` Boris A. Dekshteyn
2020-05-05 12:39 ` bug#41082: nomodeset Ryan Osborne
2020-05-06  6:56   ` Mathieu Othacehe
2020-05-06  8:19     ` pelzflorian (Florian Pelz)
2020-05-06 20:53       ` Danny Milosavljevic
2020-05-10 19:44         ` Brice Waegeneire
2020-05-06 14:57     ` Danny Milosavljevic

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/guix.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.