all messages for Guix-related lists mirrored at yhetil.org
 help / color / mirror / code / Atom feed
* Impossible to remove all offload machines
@ 2024-08-17 16:40 Ian Eure
  2024-09-14 14:55 ` bug#72686: " Maxim Cournoyer
  0 siblings, 1 reply; 7+ messages in thread
From: Ian Eure @ 2024-08-17 16:40 UTC (permalink / raw)
  To: bug-guix; +Cc: guix-devel

Ran into this issue last week.  If you:

- Configure some offload build machines in your operating-system
  configuration.
- Reconfigure your system.
- Remove all offload build machines.
- Reconfigure your system again.

...then various guix operations will still try to connect to 
offload machines, even if you reboot the affected client.

This is caused by a bug in the `guix-activation' procedure:

   ;; ... and /etc/guix/machines.scm.
   #$(if (null? (guix-configuration-build-machines config))
         #~#f
         (guix-machines-files-installation
          #~(list #$@(guix-configuration-build-machines
           config))))

If there are no build machines defined in the configuration, no
operation is performed (#f is returned), which leaves the previous
generation’s /etc/guix/machines.scm in place.

The same issue appears to affect channels:

   ;; ... and /etc/guix/channels.scm...
   #$(and channels (install-channels-file channels))

I’d be happy to take a stab at fixing this, but I’m not certain 
what
direction to go, or how much to refactor to get there. Should the
channels/machines files be removed (ignoring errors if they don’t
exist)?  Should empty files be installed?  Should that happen 
inline
in `guix-activation', or in another procedure? Should the 
filenames be
extracted to %variables to avoid duplicating between the two 
places
they’ll be used?

If someone would like to provide answered, I would contribute a 
patch.

Thanks,

 — Ian


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: bug#72686: Impossible to remove all offload machines
  2024-08-17 16:40 Impossible to remove all offload machines Ian Eure
@ 2024-09-14 14:55 ` Maxim Cournoyer
  2024-09-15  3:24   ` Ian Eure
  0 siblings, 1 reply; 7+ messages in thread
From: Maxim Cournoyer @ 2024-09-14 14:55 UTC (permalink / raw)
  To: Ian Eure; +Cc: 72686, guix-devel

Hi Ian,

Ian Eure <ian@retrospec.tv> writes:

> Ran into this issue last week.  If you:
>
> - Configure some offload build machines in your operating-system
>  configuration.
> - Reconfigure your system.
> - Remove all offload build machines.
> - Reconfigure your system again.
>
> ...then various guix operations will still try to connect to offload
> machines, even if you reboot the affected client.
>
> This is caused by a bug in the `guix-activation' procedure:
>
>   ;; ... and /etc/guix/machines.scm.
>   #$(if (null? (guix-configuration-build-machines config))
>         #~#f
>         (guix-machines-files-installation
>          #~(list #$@(guix-configuration-build-machines
>           config))))
>
> If there are no build machines defined in the configuration, no
> operation is performed (#f is returned), which leaves the previous
> generation’s /etc/guix/machines.scm in place.
>
> The same issue appears to affect channels:
>
>   ;; ... and /etc/guix/channels.scm...
>   #$(and channels (install-channels-file channels))

Interesting!

> I’d be happy to take a stab at fixing this, but I’m not certain what
> direction to go, or how much to refactor to get there. Should the
> channels/machines files be removed (ignoring errors if they don’t
> exist)?  Should empty files be installed?  Should that happen inline
> in `guix-activation', or in another procedure? Should the filenames be
> extracted to %variables to avoid duplicating between the two places
> they’ll be used?
>
> If someone would like to provide answered, I would contribute a patch.

I guess the simplest would be to attempt to remove the files when there
are no offload machines or channels, in this already existing activation
procedure.  Extracting the file names to %variables sounds preferable
yes, if there's a logical place to store them that is easily shared.

A patch would be dandy!

-- 
Thanks,
Maxim


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: bug#72686: Impossible to remove all offload machines
  2024-09-14 14:55 ` bug#72686: " Maxim Cournoyer
@ 2024-09-15  3:24   ` Ian Eure
  2024-09-15  3:53     ` Ian Eure
  2024-09-22  2:26     ` Maxim Cournoyer
  0 siblings, 2 replies; 7+ messages in thread
From: Ian Eure @ 2024-09-15  3:24 UTC (permalink / raw)
  To: Maxim Cournoyer; +Cc: 72686, guix-devel

Hi Maxim,

Maxim Cournoyer <maxim.cournoyer@gmail.com> writes:

> Hi Ian,
>
> Ian Eure <ian@retrospec.tv> writes:
>
>> Ran into this issue last week.  If you:
>>
>> - Configure some offload build machines in your 
>> operating-system
>>  configuration.
>> - Reconfigure your system.
>> - Remove all offload build machines.
>> - Reconfigure your system again.
>>
>> ...then various guix operations will still try to connect to 
>> offload
>> machines, even if you reboot the affected client.
>>
>> This is caused by a bug in the `guix-activation' procedure:
>>
>>   ;; ... and /etc/guix/machines.scm.
>>   #$(if (null? (guix-configuration-build-machines config))
>>         #~#f
>>         (guix-machines-files-installation
>>          #~(list #$@(guix-configuration-build-machines
>>           config))))
>>
>> If there are no build machines defined in the configuration, no
>> operation is performed (#f is returned), which leaves the 
>> previous
>> generation’s /etc/guix/machines.scm in place.
>>
>> The same issue appears to affect channels:
>>
>>   ;; ... and /etc/guix/channels.scm...
>>   #$(and channels (install-channels-file channels))
>
> Interesting!
>
>> I’d be happy to take a stab at fixing this, but I’m not certain 
>> what
>> direction to go, or how much to refactor to get there. Should 
>> the
>> channels/machines files be removed (ignoring errors if they 
>> don’t
>> exist)?  Should empty files be installed?  Should that happen 
>> inline
>> in `guix-activation', or in another procedure? Should the 
>> filenames be
>> extracted to %variables to avoid duplicating between the two 
>> places
>> they’ll be used?
>>
>> If someone would like to provide answered, I would contribute a 
>> patch.
>
> I guess the simplest would be to attempt to remove the files 
> when there
> are no offload machines or channels, in this already existing 
> activation
> procedure.  Extracting the file names to %variables sounds 
> preferable
> yes, if there's a logical place to store them that is easily 
> shared.
>

As I was putting together a patch for this, I realized there’s a 
problem: if a user is *manually* managing either 
/etc/guix/machines.scm or channels.scm, these files would be 
deleted, which likely isn’t what they want.  The current code lets 
users choose to manage these files manually or declaritively, and 
there’s no way to know if the files on disk are the result of a 
previous system generation or a user’s creation.  Since the 
channel management is a relatively new feature, I suspect there 
are quite a few folks with manually-managed channels that this 
would negatively impact.  I know there was some disruption just 
moving to declaritive management of channels (but I can’t find the 
thread/s at the moment).

I don’t see an elegant technical solution to this.  I think the 
best option is probably to say that those files should *always* be 
managed through operating-system, and put a fat warning in the 
channel news to update your config if they’re still handled 
manually.

The only other option I can see would be to keep the existing 
filenames for user configuration, and declaritively manage 
different files -- like declaritive-channels.scm.  This comes with 
its own set of problems, like needing to update the Guix daemon to 
read and combine multiple files; and the inability to know whether 
a given `channels.scm' is declaritively- or manually-managed means 
a bumpy upgrade path (ex. should this preexisting channels.scm 
file be left as-is, or renamed to the new name?)

I’m inclined to go with the fat-warning option, but am also 
thinking this likely needs some guix-devel discussion.

What do you think?

Thanks,

  — Ian


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: bug#72686: Impossible to remove all offload machines
  2024-09-15  3:24   ` Ian Eure
@ 2024-09-15  3:53     ` Ian Eure
  2024-09-15 19:06       ` Tomas Volf
  2024-09-22  2:26     ` Maxim Cournoyer
  1 sibling, 1 reply; 7+ messages in thread
From: Ian Eure @ 2024-09-15  3:53 UTC (permalink / raw)
  To: Maxim Cournoyer; +Cc: 72686, guix-devel

Hi Maxim,

Ian Eure <ian@retrospec.tv> writes:

> Hi Maxim,
>
> Maxim Cournoyer <maxim.cournoyer@gmail.com> writes:
>
>> Hi Ian,
>>
>> Ian Eure <ian@retrospec.tv> writes:
>>
>>> Ran into this issue last week.  If you:
>>>
>>> - Configure some offload build machines in your 
>>> operating-system
>>>  configuration.
>>> - Reconfigure your system.
>>> - Remove all offload build machines.
>>> - Reconfigure your system again.
>>>
>>> ...then various guix operations will still try to connect to
>>> offload
>>> machines, even if you reboot the affected client.
>>>
>>> This is caused by a bug in the `guix-activation' procedure:
>>>
>>>   ;; ... and /etc/guix/machines.scm.
>>>   #$(if (null? (guix-configuration-build-machines config))
>>>         #~#f
>>>         (guix-machines-files-installation
>>>          #~(list #$@(guix-configuration-build-machines
>>>           config))))
>>>
>>> If there are no build machines defined in the configuration, 
>>> no
>>> operation is performed (#f is returned), which leaves the 
>>> previous
>>> generation’s /etc/guix/machines.scm in place.
>>>
>>> The same issue appears to affect channels:
>>>
>>>   ;; ... and /etc/guix/channels.scm...
>>>   #$(and channels (install-channels-file channels))
>>
>> Interesting!
>>
>>> I’d be happy to take a stab at fixing this, but I’m not 
>>> certain
>>> what
>>> direction to go, or how much to refactor to get there. Should 
>>> the
>>> channels/machines files be removed (ignoring errors if they 
>>> don’t
>>> exist)?  Should empty files be installed?  Should that happen
>>> inline
>>> in `guix-activation', or in another procedure? Should the 
>>> filenames
>>> be
>>> extracted to %variables to avoid duplicating between the two 
>>> places
>>> they’ll be used?
>>>
>>> If someone would like to provide answered, I would contribute 
>>> a
>>> patch.
>>
>> I guess the simplest would be to attempt to remove the files 
>> when
>> there
>> are no offload machines or channels, in this already existing
>> activation
>> procedure.  Extracting the file names to %variables sounds
>> preferable
>> yes, if there's a logical place to store them that is easily 
>> shared.
>>
>
> As I was putting together a patch for this, I realized there’s a
> problem: if a user is *manually* managing either
> /etc/guix/machines.scm or channels.scm, these files would be 
> deleted,
> which likely isn’t what they want.  The current code lets users 
> choose
> to manage these files manually or declaritively, and there’s no 
> way to
> know if the files on disk are the result of a previous system
> generation or a user’s creation.  Since the channel management 
> is a
> relatively new feature, I suspect there are quite a few folks 
> with
> manually-managed channels that this would negatively impact.  I 
> know
> there was some disruption just moving to declaritive management 
> of
> channels (but I can’t find the thread/s at the moment).
>
> I don’t see an elegant technical solution to this.  I think the 
> best
> option is probably to say that those files should *always* be 
> managed
> through operating-system, and put a fat warning in the channel 
> news to
> update your config if they’re still handled manually.
>
> The only other option I can see would be to keep the existing
> filenames for user configuration, and declaritively manage 
> different
> files -- like declaritive-channels.scm.  This comes with its own 
> set
> of problems, like needing to update the Guix daemon to read and
> combine multiple files; and the inability to know whether a 
> given
> `channels.scm' is declaritively- or manually-managed means a 
> bumpy
> upgrade path (ex. should this preexisting channels.scm file be 
> left
> as-is, or renamed to the new name?)
>
> I’m inclined to go with the fat-warning option, but am also 
> thinking
> this likely needs some guix-devel discussion.
>
> What do you think?
>

Disregard this, I continued thinking after sending the email (as 
one does) and realized that any managed file will be a link into 
the store -- so if the system is reconfigured with no 
build-machines or channels *and* the corresponding file is a store 
link, it should be removed; otherwise, it should remain untouched. 
I can work with this.

Thanks,

  — Ian


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: bug#72686: Impossible to remove all offload machines
  2024-09-15  3:53     ` Ian Eure
@ 2024-09-15 19:06       ` Tomas Volf
  2024-09-19  0:35         ` Ian Eure
  0 siblings, 1 reply; 7+ messages in thread
From: Tomas Volf @ 2024-09-15 19:06 UTC (permalink / raw)
  To: Ian Eure; +Cc: Maxim Cournoyer, 72686, guix-devel

[-- Attachment #1: Type: text/plain, Size: 702 bytes --]


Hello,

Ian Eure <ian@retrospec.tv> writes:

> Disregard this, I continued thinking after sending the email (as one does) and
> realized that any managed file will be a link into the store -- so if the system
> is reconfigured with no build-machines or channels *and* the corresponding file
> is a store link, it should be removed; otherwise, it should remain untouched. I
> can work with this.

Will this correctly handle cases where user is managing the file using
for example extra-special-file?

I wonder whether fat-warning approach would not be better.

Tomas

-- 
There are only two hard things in Computer Science:
cache invalidation, naming things and off-by-one errors.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 853 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* bug#72686: Impossible to remove all offload machines
  2024-09-15 19:06       ` Tomas Volf
@ 2024-09-19  0:35         ` Ian Eure
  0 siblings, 0 replies; 7+ messages in thread
From: Ian Eure @ 2024-09-19  0:35 UTC (permalink / raw)
  To: Tomas Volf; +Cc: guix-devel, 72686, Maxim Cournoyer


Tomas Volf <~@wolfsden.cz> writes:

> [[PGP Signed Part:Undecided]]
>
> Hello,
>
> Ian Eure <ian@retrospec.tv> writes:
>
>> Disregard this, I continued thinking after sending the email 
>> (as one does) and
>> realized that any managed file will be a link into the store -- 
>> so if the system
>> is reconfigured with no build-machines or channels *and* the 
>> corresponding file
>> is a store link, it should be removed; otherwise, it should 
>> remain untouched. I
>> can work with this.
>
> Will this correctly handle cases where user is managing the file 
> using
> for example extra-special-file?
>

No, it wouldn’t.


> I wonder whether fat-warning approach would not be better.
>

I think I agree.

  — Ian




^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: bug#72686: Impossible to remove all offload machines
  2024-09-15  3:24   ` Ian Eure
  2024-09-15  3:53     ` Ian Eure
@ 2024-09-22  2:26     ` Maxim Cournoyer
  1 sibling, 0 replies; 7+ messages in thread
From: Maxim Cournoyer @ 2024-09-22  2:26 UTC (permalink / raw)
  To: Ian Eure; +Cc: 72686, guix-devel

Hi Ian,

Ian Eure <ian@retrospec.tv> writes:

[...]

> The only other option I can see would be to keep the existing
> filenames for user configuration, and declaritively manage different
> files -- like declaritive-channels.scm.  This comes with its own set
> of problems, like needing to update the Guix daemon to read and
> combine multiple files; and the inability to know whether a given
> `channels.scm' is declaritively- or manually-managed means a bumpy
> upgrade path (ex. should this preexisting channels.scm file be left
> as-is, or renamed to the new name?)

I'd think that be a great option to pursue, although it's more work more
thoughts.  Perhaps it could work along these lines (brainstorming)

I like the idea to leave the original, potentially manually written file
in place and complement it with a declarative counterpart.  The same
would also have benefited /etc/guix/acl, which suffers from the same
ambiguity.

-- 
Thanks,
Maxim


^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2024-09-22  2:27 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-08-17 16:40 Impossible to remove all offload machines Ian Eure
2024-09-14 14:55 ` bug#72686: " Maxim Cournoyer
2024-09-15  3:24   ` Ian Eure
2024-09-15  3:53     ` Ian Eure
2024-09-15 19:06       ` Tomas Volf
2024-09-19  0:35         ` Ian Eure
2024-09-22  2:26     ` Maxim Cournoyer

Code repositories for project(s) associated with this external index

	https://git.savannah.gnu.org/cgit/guix.git

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.